fix(ci): Remove conflicting packages

fix(ci): Fix end4 dependecies
fix(tests): Fix yamlint compliance with whitespace
2026-10-08 21:44:54 +11:00 · 2026-10-08 20:53:54 +11:00 · 2026-10-08 19:01:25 +11:00 · 2026-10-08 18:55:27 +11:00 · 2026-10-08 18:53:51 +11:00 · 2026-10-08 18:46:47 +11:00
152 changed files with 17493 additions and 122 deletions
@@ -41,15 +41,96 @@ jobs:
      - name: Install archiso and dependencies
        run: |
          set -euo pipefail
-          pacman -Syu --noconfirm --needed archiso jq
+          # Install with a *private* config instead of /etc/pacman.conf.
+          # The host config is shared mutable state: the tests workflow
+          # rewrites it and jobs overlap on this runner (runs 132 and 133
+          # ran concurrently), so writing it here could corrupt a concurrent
+          # tests run. It also carries [cachyos] and [chaotic-aur] leftovers
+          # from tests.yaml, and syncing those two repos means extra DNS
+          # lookups against a gateway that intermittently drops UDP/53 —
+          # that is what failed run 131 at this very step. The build only
+          # needs archiso/jq from extra; mkarchiso reads the *profile's*
+          # pacman.conf for everything that goes into the ISO.
+          BUILD_CONF=$(mktemp)
+          trap 'rm -f "$BUILD_CONF"' EXIT
+          cat > "$BUILD_CONF" << 'STOCKCONF'
+          [options]
+          DisableSandbox
+          HoldPkg     = pacman glibc
+          Architecture = auto
+          CheckSpace
+          ParallelDownloads = 5
+          SigLevel    = Required DatabaseOptional
+          LocalFileSigLevel = Optional

-      - name: Ensure /dev/stdin exists for mkinitcpio
+          [core]
+          Include = /etc/pacman.d/mirrorlist
+
+          [extra]
+          Include = /etc/pacman.d/mirrorlist
+          STOCKCONF
+          sed -i 's/^          //' "$BUILD_CONF"
+
+          # Warm the resolver cache for the mirrors we are about to query.
+          # systemd-resolved serves later lookups from cache, so a gateway
+          # UDP/53 burst cannot hit them again. Failures here are not fatal —
+          # the retry loop below is the real safety net.
+          for host in mirror.aarnet.edu.au gsl-syd.mm.fcix.net au.arch.niranjan.co; do
+            for try in 1 2 3 4 5; do
+              if getent hosts "$host" >/dev/null 2>&1; then
+                break
+              fi
+              echo "  ⏳ DNS for $host failed (try $try/5), retrying in $(( try * 3 ))s..."
+              sleep $(( try * 3 ))
+            done
+          done
+
+          # The gateway drops DNS queries in bursts; one burst must not fail
+          # the whole job, so retry with backoff before giving up.
+          synced=0
+          for try in 1 2 3 4 5; do
+            if pacman --config "$BUILD_CONF" -Syu --noconfirm --needed archiso jq; then
+              synced=1
+              break
+            fi
+            echo "  ⚠️ pacman -Syu failed (attempt $try/5), retrying in $(( try * 15 ))s..." >&2
+            sleep $(( try * 15 ))
+          done
+          if [ "$synced" -ne 1 ]; then
+            echo "❌ pacman -Syu failed after 5 attempts — giving up" >&2
+            exit 1
+          fi
+
+      - name: Ensure /dev/fd symlinks exist for mkinitcpio and procsub
        run: |
          set -euo pipefail
-          # Docker/container environments may lack /dev/stdin; mkinitcpio needs it
-          [ -e /dev/stdin ]  || ln -sf /proc/self/fd/0 /dev/stdin
-          [ -e /dev/stdout ] || ln -sf /proc/self/fd/1 /dev/stdout
-          [ -e /dev/stderr ] || ln -sf /proc/self/fd/2 /dev/stderr
+          # mkinitcpio's preset step pipes through /dev/stdin and bash process
+          # substitution (< <(...)) uses /dev/fd; both break if these symlinks
+          # are missing (they are normally created once at boot by mkinitcpio's
+          # init). Two places need them, so cover both:
+          # 1. the executor's own /dev: mkarchiso reads /dev/stdin on the host
+          #    (machine-id, version, pkglist) and the workflow's own scripts use
+          #    process substitution here. A no-op if the links already exist.
+          ln -sfn /proc/self/fd    /dev/fd
+          ln -sfn /proc/self/fd/0  /dev/stdin
+          ln -sfn /proc/self/fd/1  /dev/stdout
+          ln -sfn /proc/self/fd/2  /dev/stderr
+          # 2. the chroot's /dev: devtmpfs is single-instance, so mounting it
+          #    here yields the same tree that pacstrap/arch-chroot expose as
+          #    <chroot>/dev. When the executor's /dev is itself devtmpfs (1)
+          #    already fixed that tree; this pass is what makes it work when
+          #    the executor's /dev is a plain tmpfs or directory instead.
+          d="$(mktemp -d)"
+          trap 'umount "$d" 2>/dev/null || true; rmdir "$d" 2>/dev/null || true' EXIT
+          mount -t devtmpfs devtmpfs "$d"
+          ln -sfn /proc/self/fd    "$d/fd"
+          ln -sfn /proc/self/fd/0  "$d/stdin"
+          ln -sfn /proc/self/fd/1  "$d/stdout"
+          ln -sfn /proc/self/fd/2  "$d/stderr"
+          ls -l "$d/fd" "$d/stdin" "$d/stdout" "$d/stderr"
+          umount "$d"
+          rmdir "$d"
+          trap - EXIT

      - name: Build Arch ISO
        run: |
@@ -0,0 +1,26 @@
+name: Upstream pin check
+
+on:
+  schedule:
+    - cron: "0 6 * * 1" # Mondays 06:00 UTC — catches upstream/Qt drift between ISO builds
+  workflow_dispatch:
+  push:
+    paths:
+      - "localrepo/end4-pkgbuilds/quickshell-git/PKGBUILD"
+      - "localrepo/check-quickshell-pin.sh"
+      - "airootfs/root/customize_airootfs.sh"
+      - ".gitea/workflows/pin-check.yaml"
+
+jobs:
+  quickshell-pin:
+    runs-on: archlinux
+    steps:
+      - name: Checkout repo
+        uses: actions/checkout@v4
+
+      # Tripwire for the failure mode that broke ISO build run 137:
+      # a quickshell pin (ours or end-4's) that predates a Qt compat fix
+      # or has simply gone stale. Fails the job so the drift is visible
+      # in Actions instead of surfacing as a 3-hour ISO build failure.
+      - name: Check quickshell pins
+        run: ./localrepo/check-quickshell-pin.sh
@@ -36,7 +36,23 @@ jobs:
          rm -f /var/lib/pacman/sync/cachyos* /var/lib/pacman/sync/chaotic*

      - name: Install prerequisites
-        run: pacman -Syu --noconfirm --needed shellcheck yamllint
+        run: |
+          # The gateway intermittently drops UDP/53 (it failed build run 131
+          # at the equivalent step); retry with backoff instead of dying on
+          # the first bad DNS burst.
+          synced=0
+          for try in 1 2 3 4 5; do
+            if pacman -Syu --noconfirm --needed shellcheck yamllint; then
+              synced=1
+              break
+            fi
+            echo "⚠️ pacman -Syu failed (attempt $try/5), retrying in $(( try * 15 ))s..." >&2
+            sleep $(( try * 15 ))
+          done
+          if [ "$synced" -ne 1 ]; then
+            echo "❌ pacman -Syu failed after 5 attempts — giving up" >&2
+            exit 1
+          fi

      - name: Set up CachyOS repo
        run: |
@@ -54,7 +70,20 @@ jobs:
          printf '\n[cachyos]\nInclude = /etc/pacman.d/cachyos-mirrorlist\n' \
            >> /etc/pacman.conf

-          pacman -Syu --noconfirm --needed
+          # Retry: gateway drops UDP/53 in bursts (see run 131)
+          synced=0
+          for try in 1 2 3 4 5; do
+            if pacman -Syu --noconfirm --needed; then
+              synced=1
+              break
+            fi
+            echo "⚠️ pacman -Syu failed (attempt $try/5), retrying in $(( try * 15 ))s..." >&2
+            sleep $(( try * 15 ))
+          done
+          if [ "$synced" -ne 1 ]; then
+            echo "❌ pacman -Syu failed after 5 attempts — giving up" >&2
+            exit 1
+          fi

      - name: Set up chaotic-aur repo
        run: |
@@ -65,7 +94,20 @@ jobs:
          printf '\n[chaotic-aur]\nInclude = /etc/pacman.d/chaotic-mirrorlist\n' \
            >> /etc/pacman.conf

-          pacman -Syu --noconfirm --needed
+          # Retry: gateway drops UDP/53 in bursts (see run 131)
+          synced=0
+          for try in 1 2 3 4 5; do
+            if pacman -Syu --noconfirm --needed; then
+              synced=1
+              break
+            fi
+            echo "⚠️ pacman -Syu failed (attempt $try/5), retrying in $(( try * 15 ))s..." >&2
+            sleep $(( try * 15 ))
+          done
+          if [ "$synced" -ne 1 ]; then
+            echo "❌ pacman -Syu failed after 5 attempts — giving up" >&2
+            exit 1
+          fi

      - name: Lint shell scripts with ShellCheck
        run: |
@@ -267,20 +309,31 @@ jobs:
          echo "  Checking for conflicting packages in packages.x86_64"
          echo "═══════════════════════════════════════════════════════════════"

-          # Collect all package names from the list
+          # Sync databases first so pacman knows what exists
+          sudo pacman -Sy --noconfirm
+
+          # Collect only packages that exist in the official repositories
          PKGS=()
          while IFS= read -r pkg; do
            [[ -z "$pkg" || "$pkg" =~ ^# ]] && continue
+
+            # Check if the package exists in official repos
+            if pacman -Si "$pkg" >/dev/null 2>&1; then
              PKGS+=("$pkg")
+            else
+              echo "⚠️ Skipping AUR/missing package: $pkg"
+            fi
          done < packages.x86_64

-          # Use pacman -Sp --print to resolve the full install set and check for conflicts
-          # This catches "X and Y are in conflict" errors before the ISO build
-          PKG_LIST=$(printf '%s\n' "${PKGS[@]}")
-          if CONFLICTS=$(echo "$PKG_LIST" | pacman -Sp --needed - 2>&1); then
-            echo "✅ No package conflicts detected"
+          # Run conflict check only if we have official packages to test
+          if [ ${#PKGS[@]} -eq 0 ]; then
+            echo "✅ No official packages to check."
+          elif CONFLICTS=$(pacman -Sp --needed "${PKGS[@]}" 2>&1); then
+            echo "✅ No package conflicts detected among official packages"
          else
-            echo "$CONFLICTS" | grep -i "conflict" || true
+            echo "------- Pacman Output -------"
+            echo "$CONFLICTS"
+            echo "-----------------------------"
            echo ""
            echo "═══════════════════════════════════════════════════════════════"
            echo "  ❌ Conflicting packages found — fix packages.x86_64"
@@ -5,3 +5,7 @@ out/
 # In-image copy of localrepo/ — populated by localrepo/update.sh and
 # .gitea/workflows/build-iso.yaml, shipped as /opt/localrepo on the ISO
 airootfs/opt/localrepo/
+
+# Build stamp staged by profiledef.sh at ISO build time (see AGENTS.md);
+# consumed by customize_airootfs.sh, never committed
+airootfs/root/.iso-build-stamp
@@ -49,18 +49,57 @@ install them into the target without the network.
 | File | Purpose |
 |------|---------|
 | `packages.x86_64` | Live ISO package list (~402 packages) |
-| `profiledef.sh` | ISO metadata, compression, boot modes |
+| `profiledef.sh` | ISO metadata, compression, boot modes, build-stamp staging |
 | `pacman.conf` | Repos: cachyos → core → extra → multilib → chaotic-aur → local-aur |
 | `bootstrap_packages` | Minimal build-time packages (`base`, `arch-install-scripts`) |
 | `airootfs/root/customize_airootfs.sh` | Runs inside chroot during build: keyrings, skel dotfiles (incl. end4-pC), qsConfig patch, end-4 `install-deps`, package harvest, uv/font pre-warm |
 | `airootfs/root/.live-pacman.conf` | `/etc/pacman.conf` of the built image (adds `[local-aur]` = `file:///opt/localrepo`) |
-| `airootfs/usr/local/bin/alvin-install` | Installer: partitions, pacstrap, user, end-4 dotfiles (`--skip-alldeps`), boot |
+| `airootfs/usr/local/bin/alvin-install` | Installer: partitions, pacstrap, LUKS (systemd initramfs **or** experimental unl0kr + optional TPM2 unlock), user, git identity + GitHub SSH keys, login manager (none/greetd/sddm/gdm) + autologin, optional sshd (default on), end-4 dotfiles (`--skip-alldeps`), boot |
 | `localrepo/build-end4-deps.sh` | Non-interactive AUR builds for end-4 dependencies |
 | `localrepo/update.sh` | Regenerates localrepo DB, syncs names to packages.x86_64, syncs `airootfs/opt/localrepo/` |
+| `localrepo/check-quickshell-pin.sh` | Tripwire: our quickshell pin and end-4's must include the Qt 6.12 fix and stay <45d old (`QUICKSHELL_PIN_MAX_AGE_DAYS` overrides) |
+| `.gitea/workflows/pin-check.yaml` | Runs the pin check weekly (Mon 06:00), on dispatch, and on pushes touching pins/`customize_airootfs.sh` |
+
+## alvin-install (installer inside the ISO)
+
+Source: `airootfs/usr/local/bin/alvin-install` (~1,880 lines, **no `.sh` extension**).
+The airootfs overlay ships it as `/usr/local/bin/alvin-install` (mode `0755` forced in
+`profiledef.sh` `file_permissions`), and `/etc/motd` advertises it on the live medium.
+
+- **Invoke**: as root from the live session. Hard requirements: `gum` and UEFI —
+  `check_prereqs` exits if `/sys/firmware/efi` is missing. Log: `/var/log/alvin-install.log`
+  (copied into the target at the end; `ERR` trap prints the failing line).
+- **Structure**: `main()` runs 16 `screen_*` TUI functions (collect answers: welcome, keymap,
+  network, disk, luks, unl0kr, filesystem, username, password, hostname, git, timezone,
+  locale, login manager, sshd, summary) then a fixed order of `install_*` steps
+  (partition → LUKS → format/mount → pacstrap → fstab → repos → timezone → locale →
+  hostname → network → sshd → user → git/SSH → end-4 dots → mkinitcpio → bootloader →
+  TPM/unl0kr → login manager → autologin → cleanup). Screens and install steps are
+  independent — edit one without
+  touching the other. An `EXIT` trap unmounts `$TARGET` and closes `cryptroot` on any exit.
+- **Package list**: `install_pacstrap` builds the *installed* system's list from the medium's
+  `/run/archiso/bootmnt/arch/pkglist.x86_64.txt` (i.e. `pacman -Q` of the live ISO), so
+  `packages.x86_64` changes flow into installed systems. It drops `PKGS_EXCLUDE`
+  (`archiso mkinitcpio-archiso mkinitcpio-nfs-utils syslinux memtest86+`) plus names not
+  resolvable in the live repos, then always appends hardcoded essentials
+  (`base linux linux-firmware linux-cachyos networkmanager grub efibootmgr sudo git …`).
+- **CI never lints it**: the shellcheck step globs only `*.sh`. Check manually after edits:
+  `shellcheck -x -s bash airootfs/usr/local/bin/alvin-install`
+- end-4 quirks (`--skip-alldeps`, `yes i`, end4-pC re-copy) are in [Gotchas](#gotchas) below.
+
+## Verify a single change locally (mirrors CI)
+
+```bash
+shellcheck -x -s bash <script>.sh          # plus the alvin-install command above
+yamllint -d "{extends: relaxed, rules: {document-start: disable, line-length: disable, new-line-at-end-of-file: disable}}" <file>.yaml
+```
+
+`packages.x86_64` syntax: one package per line, `[a-zA-Z0-9._@+\-]+` only, no trailing
+whitespace.

 ## Gotchas

- The profile root is the **repo root** (not a `releng/` subdirectory). The CI build-iso workflow uses `mkarchiso -v -w work -o out/ releng` but this is a naming convention — the actual profile files live at the repo root.
+- The profile root is the **repo root** (not a `releng/` subdirectory). CI builds with `mkarchiso -v -w "$PWD/work" -o "$PWD/out" -- "$PWD"` (`.gitea/workflows/build-iso.yaml`), and the local build command above does the same — never pass a `releng` path.
 - `customize_airootfs.sh` clones git repos (oh-my-zsh, lazy.nvim, plugins, end-4 dots) into `/etc/skel` and `/opt` during the ISO build. These require network access at build time but make the live ISO work offline.
 - `customize_airootfs.sh` runs `./setup install-deps -f -s --skip-plasmaintg` as the throwaway user `ii-builder` (end-4's scripts refuse to run as root) and aborts the build if it fails. `--skip-plasmaintg` is deliberate: that optional Firefox widget pulls 410 packages / 526 MiB of KDE.
 - The `[local-aur]` repo path in `pacman.conf` (`file:///home/alvin/alvinarch/localrepo`) is for local builds only. The CI does not use this path.
@@ -70,5 +109,7 @@ install them into the target without the network.
 - **end4-pC** (`pctrade/end4-pC`) is the default quickshell config: cloned into `/etc/skel/.config/quickshell/end4-pC` at build time, selected by patching `hl.env("qsConfig", "ii")` → `"end4-pC"` in the **staged** `/opt/dots-hyprland/dots/.config/hypr/hyprland/variables.lua` (there is no `hypr/hyprland/` in this repo — `./setup install` copies it to the installed system). `alvin-install` re-copies end4-pC into the user's home *after* `./setup install`, because end-4's installer `rsync --delete`s all of `~/.config/quickshell`.
 - `airootfs/etc/skel/.config/illogical-impulse/presets/` carries the user's presets (`Laptop.json`, `Personal-Performance.json`, `Personal-Performance.zip`). They embed `/home/alvin/...` paths, so wallpapers/screenshots need fixing up after install.
 - End-4 metapackages are built from `localrepo/end4-pkgbuilds/` (quickshell-git, bibata-modern-classic-bin, microtex-git).
+- **quickshell pin / Qt 6.12**: end-4 pins quickshell to `41651d7` (Sep 25), which predates upstream fix `5d5d498` (Oct 3, *"use MOC includes instead of opaque pointer definitions — … Qt 6.12 compatibility"*). Arch shipped qt6 6.12.0 on Oct 8 and the old pin died with `Meta Types must be fully defined` in the moc build of quickshell-hyprland-ipc (failed CI run 137). `customize_airootfs.sh` therefore rewrites end-4's `_commit` to `11ca60be` after cloning — but **only** while it still matches `^_commit='41651d7`, so once end-4 bumps their own pin the guard goes inert and theirs wins. `localrepo/check-quickshell-pin.sh` (weekly `pin-check.yaml` job) fails CI if either pin goes stale or loses the fix; it warns instead of failing when end-4's known-stale pin is covered by the override.
 - `packages.x86_64` is sorted alphabetically. Keep it sorted when adding/removing entries.
 - `airootfs/opt/localrepo/` is a build artifact (gitignored) — never commit it.
+- **Build stamp flow**: `profiledef.sh` (sourced by mkarchiso) stages the gitignored `airootfs/root/.iso-build-stamp` when a `.git` dir exists **or** `CI`/`GITEA_ACTIONS` is set — line reads `AlvinArch build <date> | commit <date> | <4-char hash>` (falls back to `commit unknown` if `git -c safe.directory` can't read the repo; without `.git`/CI no file is staged). `customize_airootfs.sh` keeps it as `/etc/alvin-build-stamp` on the live medium **and appends it to the live `/etc/motd`**, so the booted ISO identifies its build. The installed system's motd is never touched by us — `alvin-install` has no motd step (an earlier `install_motd` that copied the banner + stamp into the target was removed on purpose).
@@ -37,9 +37,10 @@ AlvinArch/
 6. [System Services & Networking](#system-services--networking)
 7. [Local Repository (localrepo/)](#local-repository-localrepo)
 8. [Boot Configuration](#boot-configuration)
-9. [Build & Test](#build--test)
-10. [Planned Additions](#planned-additions)
-11. [Troubleshooting](#troubleshooting)
+9. [Automated Installer (alvin-install)](#automated-installer-alvin-install)
+10. [Build & Test](#build--test)
+11. [Planned Additions](#planned-additions)
+12. [Troubleshooting](#troubleshooting)

 ---

@@ -50,6 +51,7 @@ AlvinArch/
 ### Key Features

 - **Hyprland + end-4** — Wayland compositor with illogical-impulse dotfiles (quickshell, bibata cursors, microtex)
+- **Automated installer (`alvin-install`)** — gum TUI: LUKS with systemd initramfs or experimental touchscreen unl0kr, optional TPM2 auto-unlock, GitHub SSH key import, login manager choice (none/greetd/sddm/gdm), optional sshd (on by default), autologin; the build stamp identifies the live ISO via its `/etc/motd`
 - **LazyVim** — Pre-configured Neovim with lazy.nvim and curated plugins
 - **Fish + Zsh + Starship** — Dual shell setup with oh-my-zsh and a cross-shell prompt
 - **Local AUR repo** — Pre-built packages (end-4 deps, wallust, grub-customizer, etc.) that aren't in official repos
@@ -137,7 +139,7 @@ AlvinArch/
 │   │   └── mkinitcpio.conf.d/       # archiso initramfs config
 │   ├── usr/
 │   │   ├── lib/os-release           # usr-merge os-release
-│   │   ├── local/bin/               # choose-mirror, Installation_guide, livecd-sound
+│   │   ├── local/bin/               # alvin-install, choose-mirror, Installation_guide, livecd-sound
 │   │   ├── local/share/livecd-sound/ # ALSA config (asound.conf.in)
 │   │   └── share/pacman/keyrings/   # CachyOS GPG keyring + trust data
 │   └── root/
@@ -304,6 +306,66 @@ Legacy BIOS boot with custom splash screen. Includes PXE network boot config.

 ---

+## Automated Installer (alvin-install)
+
+The ISO ships an interactive installer at `/usr/local/bin/alvin-install` (source:
+`airootfs/usr/local/bin/alvin-install`, ~1,880 lines of bash; the live `/etc/motd`
+advertises it). It partitions, encrypts, installs, and fully configures a system —
+including the end-4 dotfiles — without network access to this repo.
+
+### Running it
+
+```bash
+alvin-install   # as root on the live medium (root autologins on tty1)
+```
+
+Requirements: **UEFI boot** (it exits if `/sys/firmware/efi` is missing — BIOS/CSM
+is not supported by the installer) and `gum`. A network connection is required and
+verified by pinging `archlinux.org` before any disk is touched; the network screen
+can open `nmtui` for WiFi. Every step is logged to `/var/log/alvin-install.log`,
+which is copied into the installed system.
+
+### What it asks (gum TUI screens)
+
+Keymap → network → target disk (the live USB is hidden from the list) → LUKS
+encryption (optional; **the LUKS passphrase is the same as your login password**)
+→ experimental unl0kr touchscreen unlock → filesystem (`ext4`/`btrfs`) →
+username/password/hostname → git identity + GitHub username (both optional) →
+timezone/locale → login manager → SSH server (enabled by default) → summary.
+
+### What it does
+
+1. GPT partitioning (1 GiB ESP) on the chosen disk, optional LUKS2 on the rest,
+   format + mount at `/mnt`
+2. `pacstrap` with the package list derived from the medium's
+   `pkglist.x86_64.txt` (`pacman -Q` of the live ISO) — `archiso`, `syslinux`,
+   `memtest86+` etc. are dropped, hardcoded essentials (kernel, GRUB,
+   NetworkManager, cryptsetup, microcode) always appended
+3. User account, sudo, git config, GitHub SSH keys (`ssh-import-id`, falling
+   back to `github.com/<user>.keys`)
+4. end-4 dotfiles from the staged `/opt/dots-hyprland` via
+   `./setup install -f -s --skip-alldeps`
+5. Initramfs in one of two modes: **Mode A** — systemd initramfs + `sd-encrypt`
+   (default); **Mode B** — busybox hooks + unl0kr touchscreen unlock
+   (experimental, mutually exclusive with TPM2; falls back to Mode A on failure)
+6. Optional **TPM2 auto-unlock** (`systemd-cryptenroll`, PCR 0+7; passphrase
+   slot kept as fallback; warns if Secure Boot is off)
+7. GRUB (UEFI, boot entry `ALVIN`), login manager — `none` (plain tty, Hyprland
+   autostarts), `greetd`+tuigreet, `sddm`, or `gdm` — falls back to `none` only
+   if the **package** can't be resolved/installed; a failed `systemctl enable`
+   keeps `getty@tty1` as the login path (the summary still reports the chosen
+   manager). Optional autologin (forced off when TPM2 is enrolled), and sshd
+   enabled at boot when selected (default: on) — Arch's stock config allows
+   **password login with the same password as LUKS**, so only accept the default
+   on networks you trust (or harden `sshd_config` afterwards). The final banner
+   reports whether the enable actually succeeded, not just what was selected
+
+On failure an `EXIT` trap unmounts `/mnt` and closes the `cryptroot` mapping, so
+re-running is safe. If the end-4 step reports "incomplete", see the repository's
+`AGENTS.md` Gotchas for the chroot/systemd limitations that cause it.
+
+---
+
 ## Build & Test

 ### Building the ISO
@@ -1,6 +1,19 @@
 #!/usr/bin/env bash
 set -euo pipefail

+# The chroot's /dev is the kernel's single shared devtmpfs, which only gets the
+# fd/stdin/stdout/stderr symlinks at boot (from mkinitcpio's init). If the
+# runner environment lacks them, process substitution (< <(...)) and upstream
+# tools (pacman-key) fail with "… /dev/fd/63: No such file or directory".
+# Self-heal here; the CI build-iso workflow does the same before pacstrap so
+# that mkinitcpio's hook (which pipes through /dev/stdin) works too.
+for _link in "fd:/proc/self/fd" "stdin:/proc/self/fd/0" \
+  "stdout:/proc/self/fd/1" "stderr:/proc/self/fd/2"; do
+  [[ -e "/dev/${_link%%:*}" || -L "/dev/${_link%%:*}" ]] ||
+    ln -sfn "${_link#*:}" "/dev/${_link%%:*}"
+done
+unset _link
+
 # Populate the keyring in the built root from the keyring bundles
 # (/usr/share/pacman/keyrings, incl. the copied cachyos keyring).
 # This mirrors the guide; it runs inside the image you are making.
@@ -14,6 +27,17 @@ pacman-key --populate archlinux cachyos chaotic
 install -m 0644 /root/.live-pacman.conf /etc/pacman.conf
 rm -f /root/.live-pacman.conf

+# Build stamp staged by profiledef.sh (absent for non-git, non-CI builds):
+# keep the stamp file itself as a reference, drop the staging copy, and
+# stamp the live medium's motd so the booted ISO identifies its build (the
+# installed system keeps the stock package motd - alvin-install never
+# writes /etc/motd).
+if [[ -f /root/.iso-build-stamp ]]; then
+  install -m 0644 /root/.iso-build-stamp /etc/alvin-build-stamp
+  cat /etc/alvin-build-stamp >> /etc/motd
+  rm -f /root/.iso-build-stamp
+fi
+
 # ============================================================================
 # Pre-install dotfile dependencies into /etc/skel so new users get them
 # instantly on first login (no network required).
@@ -65,6 +89,22 @@ if [[ ! -d "${DOTS_REPO}/.git" ]]; then
  git -C "${DOTS_REPO}" submodule update --init --depth=1
 fi

+# end-4 pins quickshell to 41651d7 (Sep 25), which predates quickshell's
+# Qt 6.12 fix (5d5d498, Oct 3: "use MOC includes instead of opaque pointer
+# definitions - Fixes linking issues and Qt 6.12 compatibility"). Arch
+# shipped qt6 6.12.0 into extra on Oct 8; with the old pin qmetatype.h's
+# "Meta Types must be fully defined" static_assert kills the moc build of
+# quickshell-hyprland-ipc (failed CI run 137) and the whole ISO build with
+# it. Force the fixed commit, but ONLY while end-4 still carries the old
+# pin - once they bump it themselves the guard stops matching and their
+# pin wins untouched. localrepo/check-quickshell-pin.sh (weekly CI)
+# verifies both this pin and end-4's stay Qt 6.12-compatible.
+QS_PKG="${DOTS_REPO}/sdata/dist-arch/illogical-impulse-quickshell-git/PKGBUILD"
+if [[ -f "${QS_PKG}" ]] && grep -q "^_commit='41651d7" "${QS_PKG}"; then
+  echo "[customize] Bumping end-4 quickshell pin to 11ca60be (Qt 6.12 fix)..."
+  sed -i "s|^_commit='41651d7[^']*'|_commit='11ca60be22b063478ed9586ca1d7f92f0f261caf'|" "${QS_PKG}"
+fi
+
 # ── end4-pC: the default quickshell config, shipped in skel ──────────────────
 # pctrade/end4-pC is a fork of the ii shell config. It lives next to ii in
 # ~/.config/quickshell and does not modify it; which one runs is decided by
@@ -87,34 +87,36 @@ done
 info "═══ Step 2: Building AUR dependencies ═══"

 # ── Theming & appearance ─────────────────────────────────────────────────────
+# Entries in these lists must start at column 0: CI's package check accepts
+# repo-less packages via `grep -qxF <pkg>` against this file (exact whole-line
+# match), which silently never matched while the names were indented.
 AUR_THEMING=(
-  adw-gtk-theme-git
-  darkly-bin
-  ttf-material-symbols-variable-git
-  ttf-readex-pro
-  ttf-rubik-vf
-  ttf-twemoji
-  otf-space-grotesk
-  kde-material-you-colors-git
+adw-gtk-theme-git
+darkly-bin
+ttf-material-symbols-variable-git
+ttf-readex-pro
+ttf-rubik-vf
+ttf-twemoji
+otf-space-grotesk
+kde-material-you-colors-git
 )

 # ── end-4 specific / build-from-source packages ──────────────────────────────
 # matugen — material you color generation tool
 # speech-dispatcher — may need AUR build on some setups
 AUR_TOOLS=(
-  matugen
-  python-rpypostprocess
-  tts
+matugen
+python-rpypostprocess
+tts
 )

 # ── Packages not in any standard repo ────────────────────────────────────────
 AUR_MISSING=(
-  asciinema-agg
-  davs2
-  syncthingtray-qt6
-  varia
-  woeusb-ng
-  ttf-ms-fonts
+asciinema-agg
+davs2
+varia
+woeusb-ng
+ttf-ms-fonts
 )

 # ── Large / complex builds (skipped with --quick) ────────────────────────────
@@ -0,0 +1,184 @@
+#!/usr/bin/env bash
+# Verify that every quickshell pin we build against is current enough to
+# survive the next Arch Qt update.
+#
+# Why this exists: CI run 137 (2026-10-08) failed because end-4 pinned
+# quickshell to 41651d7 (Sep 25), which predates quickshell's Qt 6.12 fix
+# (5d5d498, Oct 3: "use MOC includes instead of opaque pointer definitions
+# - Fixes linking issues and Qt 6.12 compatibility"). Arch shipped
+# qt6 6.12.0 the next day and the pinned commit stopped compiling
+# ("Meta Types must be fully defined"). customize_airootfs.sh papers over
+# end-4's stale pin at build time; this script is the tripwire that tells
+# us when pins - ours OR end-4's - fall behind again BEFORE a build does.
+#
+# Checked pins:
+#   1. localrepo/end4-pkgbuilds/quickshell-git/PKGBUILD  (our own pin)
+#   2. end-4/dots-hyprland sdata/dist-arch PKGBUILD      (live from GitHub)
+#
+# Checks per pin:
+#   - commit exists upstream
+#   - includes the Qt 6.12 fix (5d5d498)
+#   - not older than QUICKSHELL_PIN_MAX_AGE_DAYS (default 45)
+#
+# Exit 1 on any failure so CI (pin-check.yaml) goes red.
+#
+# Usage: ./localrepo/check-quickshell-pin.sh
+set -euo pipefail
+
+QT612_FIX='5d5d49873fe8cf1f99ddfd5006ceb2057c5c9b13'
+QS_REPO='https://git.outfoxxed.me/quickshell/quickshell.git'
+END4_STALE_PIN='41651d7'   # the pin customize_airootfs.sh overrides
+END4_PKGBUILD_URL='https://raw.githubusercontent.com/end-4/dots-hyprland/main/sdata/dist-arch/illogical-impulse-quickshell-git/PKGBUILD'
+MAX_AGE_DAYS="${QUICKSHELL_PIN_MAX_AGE_DAYS:-45}"
+
+profile_dir="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")/.." && pwd)"
+LOCAL_PKGBUILD="${profile_dir}/localrepo/end4-pkgbuilds/quickshell-git/PKGBUILD"
+
+FAILED=0
+
+fail() {
+  echo "❌ $1" >&2
+  FAILED=1
+}
+
+# ── collect pins ────────────────────────────────────────────────────────────
+
+pin_of() { # <file-contents-stdin> -> first _commit='...' value
+  sed -n "s/^_commit='\([0-9a-f]\{7,40\}\)'.*/\1/p" | head -n1
+}
+
+if [[ ! -f "$LOCAL_PKGBUILD" ]]; then
+  echo "❌ missing ${LOCAL_PKGBUILD}" >&2
+  exit 1
+fi
+local_pin=$(pin_of < "$LOCAL_PKGBUILD")
+if [[ -z "$local_pin" ]]; then
+  echo "❌ no _commit= found in ${LOCAL_PKGBUILD}" >&2
+  exit 1
+fi
+
+end4_pin=''
+end4_pkgbuild=''
+for try in 1 2 3 4 5; do
+  if end4_pkgbuild=$(curl -fsSL --max-time 30 "$END4_PKGBUILD_URL"); then
+    end4_pin=$(printf '%s\n' "$end4_pkgbuild" | pin_of)
+    break
+  fi
+  echo "  ⏳ fetch of end-4 PKGBUILD failed (try $try/5), retrying in $(( try * 3 ))s..." >&2
+  sleep $(( try * 3 ))
+done
+if [[ -z "$end4_pin" ]]; then
+  fail "could not fetch end-4's quickshell PKGBUILD from GitHub — network or path change?"
+  echo ""
+  echo "Result: FAILED"
+  exit 1
+fi
+
+# ── clone quickshell (blobless: commits+trees only, fast) ───────────────────
+
+tmp=$(mktemp -d)
+trap 'rm -rf "$tmp"' EXIT
+
+cloned=0
+for try in 1 2 3; do
+  if git clone --filter=blob:none --quiet "$QS_REPO" "$tmp/qs" 2>/dev/null; then
+    cloned=1
+    break
+  fi
+  rm -rf "$tmp/qs"
+  echo "  ⏳ clone of quickshell failed (try $try/3), retrying in $(( try * 5 ))s..." >&2
+  sleep $(( try * 5 ))
+done
+if [[ "$cloned" -ne 1 ]]; then
+  fail "could not clone ${QS_REPO} — network or repo moved?"
+  echo ""
+  echo "Result: FAILED"
+  exit 1
+fi
+QS="$tmp/qs"
+qs_head=$(git -C "$QS" rev-parse HEAD)
+qs_head_date=$(git -C "$QS" show -s --format=%cs HEAD)
+echo "quickshell upstream master: ${qs_head:0:12} (${qs_head_date})"
+echo ""
+
+now=$(date +%s)
+
+# <label> <pin> <mode>: mode "hard" fails on any problem; mode "soft" only
+# warns, for pins we don't control (end-4's) — UNLESS the problem is one the
+# customize_airootfs.sh override does not cover, which always fails hard
+# because it would break the next ISO build.
+check_pin() {
+  local label=$1 pin=$2 mode=$3
+  local ts age behind bad=0
+
+  if ! git -C "$QS" cat-file -e "${pin}^{commit}" 2>/dev/null; then
+    fail "$label: pin '$pin' does not exist in quickshell upstream"
+    return
+  fi
+
+  local has_fix=0
+  if git -C "$QS" merge-base --is-ancestor "$QT612_FIX" "$pin"; then
+    has_fix=1
+  fi
+
+  ts=$(git -C "$QS" show -s --format=%ct "$pin")
+  age=$(( (now - ts) / 86400 ))
+  behind=$(git -C "$QS" rev-list --count "$pin..HEAD")
+
+  if [[ "$mode" == "hard" ]]; then
+    if [[ "$has_fix" -eq 0 ]]; then
+      fail "$label: pin '$pin' PREDATES the Qt 6.12 fix (${QT612_FIX:0:12}) — will not compile against Qt >= 6.12"
+      bad=1
+    fi
+    if (( age > MAX_AGE_DAYS )); then
+      fail "$label: pin is $age days old (> ${MAX_AGE_DAYS}d), $behind commit(s) behind upstream master — bump it"
+      bad=1
+    fi
+    if [[ "$bad" -eq 0 ]]; then
+      echo "  ✅ $label: pin ${pin:0:12} includes the Qt 6.12 fix, age ${age}d (${behind} commit(s) behind master)"
+    fi
+    return
+  fi
+
+  # soft mode: our build-time override compensates for this pin, so drift is
+  # a heads-up — it cannot break the ISO build on its own.
+  if [[ "$has_fix" -eq 0 ]]; then
+    echo "  ⚠️  $label: pin ${pin:0:12} predates the Qt 6.12 fix — covered by the customize_airootfs.sh override, but end-4 should bump it"
+  else
+    echo "  ✅ $label: pin ${pin:0:12} includes the Qt 6.12 fix"
+  fi
+  if (( age > MAX_AGE_DAYS )); then
+    echo "  ⚠️  $label: pin is $age days old (> ${MAX_AGE_DAYS}d), $behind commit(s) behind master — consider bumping (not enforced, we don't own this pin)"
+  else
+    echo "  ✅ $label: pin age ${age}d (${behind} commit(s) behind master), limit ${MAX_AGE_DAYS}d"
+  fi
+}
+
+# ── our pin ─────────────────────────────────────────────────────────────────
+
+echo "our pin (localrepo/end4-pkgbuilds):"
+check_pin "ours" "$local_pin" hard
+
+# ── end-4's pin ─────────────────────────────────────────────────────────────
+
+echo ""
+echo "end-4's pin (dots-hyprland sdata/dist-arch):"
+# end-4's pin is only safe if OUR override covers it: customize_airootfs.sh
+# rewrites exactly the 41651d7 pin. Any other Qt-unsafe end-4 pin sails
+# straight into the ISO build unpatched → hard failure.
+if [[ "$end4_pin" == "$END4_STALE_PIN"* ]]; then
+  echo "  ℹ️  end-4 still pins ${end4_pin:0:12} — customize_airootfs.sh override is active"
+  check_pin "end-4" "$end4_pin" soft
+else
+  check_pin "end-4" "$end4_pin" hard
+  echo "  ℹ️  end-4 has moved off ${END4_STALE_PIN} to ${end4_pin:0:12}"
+  echo "     → if it now passes, consider retiring the override guard in"
+  echo "       customize_airootfs.sh and syncing our own pin to match."
+fi
+
+echo ""
+if [[ "$FAILED" -ne 0 ]]; then
+  echo "Result: FAILED"
+  exit 1
+fi
+echo "Result: OK — all quickshell pins are Qt 6.12-safe and within ${MAX_AGE_DAYS}d of upstream"
@@ -0,0 +1 @@
+ref: refs/heads/master
@@ -0,0 +1,9 @@
+[core]
+	repositoryformatversion = 0
+	filemode = true
+	bare = true
+[remote "origin"]
+	url = https://github.com/end-4/MicroTeX.git
+	tagOpt = --no-tags
+	fetch = +refs/*:refs/*
+	mirror = true
@@ -0,0 +1 @@
+Unnamed repository; edit this file 'description' to name the repository.
@@ -0,0 +1,15 @@
+#!/bin/sh
+#
+# An example hook script to check the commit log message taken by
+# applypatch from an e-mail message.
+#
+# The hook should exit with non-zero status after issuing an
+# appropriate message if it wants to stop the commit.  The hook is
+# allowed to edit the commit message file.
+#
+# To enable this hook, rename this file to "applypatch-msg".
+
+. git-sh-setup
+commitmsg="$(git rev-parse --git-path hooks/commit-msg)"
+test -x "$commitmsg" && exec "$commitmsg" ${1+"$@"}
+:
@@ -0,0 +1,74 @@
+#!/bin/sh
+#
+# An example hook script to check the commit log message.
+# Called by "git commit" with one argument, the name of the file
+# that has the commit message.  The hook should exit with non-zero
+# status after issuing an appropriate message if it wants to stop the
+# commit.  The hook is allowed to edit the commit message file.
+#
+# To enable this hook, rename this file to "commit-msg".
+
+# Uncomment the below to add a Signed-off-by line to the message.
+# Doing this in a hook is a bad idea in general, but the prepare-commit-msg
+# hook is more suited to it.
+#
+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
+
+# This example catches duplicate Signed-off-by lines and messages that
+# would confuse 'git am'.
+
+ret=0
+
+test "" = "$(grep '^Signed-off-by: ' "$1" |
+	 sort | uniq -c | sed -e '/^[ 	]*1[ 	]/d')" || {
+	echo >&2 Duplicate Signed-off-by lines.
+	ret=1
+}
+
+comment_re="$(
+	{
+		git config --get-regexp "^core\.comment(char|string)\$" ||
+			echo '#'
+	} | sed -n -e '
+		${
+			s/^[^ ]* //
+			s|[][*./\]|\\&|g
+			s/^auto$/[#;@!$%^&|:]/
+			p
+		}'
+)"
+scissors_line="^${comment_re} -\{8,\} >8 -\{8,\}\$"
+comment_line="^${comment_re}.*"
+blank_line='^[ 	]*$'
+# Disallow lines starting with "diff -" or "Index: " in the body of the
+# message. Stop looking if we see a scissors line.
+line="$(sed -n -e "
+	# Skip comments and blank lines at the start of the file.
+	/${scissors_line}/q
+	/${comment_line}/d
+	/${blank_line}/d
+	# The first paragraph will become the subject header so
+	# does not need to be checked.
+	: subject
+	n
+	/${scissors_line}/q
+	/${blank_line}/!b subject
+	# Check the body of the message for problematic
+	# prefixes.
+	: body
+	n
+	/${scissors_line}/q
+	/${comment_line}/b body
+	/^diff -/{p;q;}
+	/^Index: /{p;q;}
+	b body
+	" "$1")"
+if test -n "$line"
+then
+	echo >&2 "Message contains a diff that will confuse 'git am'."
+	echo >&2 "To fix this indent the diff."
+	ret=1
+fi
+
+exit $ret
@@ -0,0 +1,168 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+use IPC::Open2;
+
+# An example hook script to integrate Watchman
+# (https://facebook.github.io/watchman/) with git to speed up detecting
+# new and modified files.
+#
+# The hook is passed a version (currently 2) and last update token
+# formatted as a string and outputs to stdout a new update token and
+# all files that have been modified since the update token. Paths must
+# be relative to the root of the working tree and separated by a single NUL.
+#
+# To enable this hook, rename this file to "query-watchman" and set
+# 'git config core.fsmonitor .git/hooks/query-watchman'
+#
+my ($version, $last_update_token) = @ARGV;
+
+# Uncomment for debugging
+# print STDERR "$0 $version $last_update_token\n";
+
+# Check the hook interface version
+if ($version ne 2) {
+	die "Unsupported query-fsmonitor hook version '$version'.\n" .
+	    "Falling back to scanning...\n";
+}
+
+my $git_work_tree = get_working_dir();
+
+my $json_pkg;
+eval {
+	require JSON::XS;
+	$json_pkg = "JSON::XS";
+	1;
+} or do {
+	require JSON::PP;
+	$json_pkg = "JSON::PP";
+};
+
+launch_watchman();
+
+sub launch_watchman {
+	my $o = watchman_query();
+	if (is_work_tree_watched($o)) {
+		output_result($o->{clock}, @{$o->{files}});
+	}
+}
+
+sub output_result {
+	my ($clockid, @files) = @_;
+
+	# Uncomment for debugging watchman output
+	# open (my $fh, ">", ".git/watchman-output.out");
+	# binmode $fh, ":utf8";
+	# print $fh "$clockid\n@files\n";
+	# close $fh;
+
+	binmode STDOUT, ":utf8";
+	print $clockid;
+	print "\0";
+	local $, = "\0";
+	print @files;
+}
+
+sub watchman_clock {
+	my $response = qx/watchman clock "$git_work_tree"/;
+	die "Failed to get clock id on '$git_work_tree'.\n" .
+		"Falling back to scanning...\n" if $? != 0;
+
+	return $json_pkg->new->utf8->decode($response);
+}
+
+sub watchman_query {
+	my $pid = open2(\*CHLD_OUT, \*CHLD_IN, 'watchman -j --no-pretty')
+	or die "open2() failed: $!\n" .
+	"Falling back to scanning...\n";
+
+	# In the query expression below we're asking for names of files that
+	# changed since $last_update_token but not from the .git folder.
+	#
+	# To accomplish this, we're using the "since" generator to use the
+	# recency index to select candidate nodes and "fields" to limit the
+	# output to file names only. Then we're using the "expression" term to
+	# further constrain the results.
+	my $last_update_line = "";
+	if (substr($last_update_token, 0, 1) eq "c") {
+		$last_update_token = "\"$last_update_token\"";
+		$last_update_line = qq[\n"since": $last_update_token,];
+	}
+	my $query = <<"	END";
+		["query", "$git_work_tree", {$last_update_line
+			"fields": ["name"],
+			"expression": ["not", ["dirname", ".git"]]
+		}]
+	END
+
+	# Uncomment for debugging the watchman query
+	# open (my $fh, ">", ".git/watchman-query.json");
+	# print $fh $query;
+	# close $fh;
+
+	print CHLD_IN $query;
+	close CHLD_IN;
+	my $response = do {local $/; <CHLD_OUT>};
+
+	# Uncomment for debugging the watch response
+	# open ($fh, ">", ".git/watchman-response.json");
+	# print $fh $response;
+	# close $fh;
+
+	die "Watchman: command returned no output.\n" .
+	"Falling back to scanning...\n" if $response eq "";
+	die "Watchman: command returned invalid output: $response\n" .
+	"Falling back to scanning...\n" unless $response =~ /^\{/;
+
+	return $json_pkg->new->utf8->decode($response);
+}
+
+sub is_work_tree_watched {
+	my ($output) = @_;
+	my $error = $output->{error};
+	if ($error and $error =~ m/unable to resolve root .* directory (.*) is not watched/) {
+		my $response = qx/watchman watch "$git_work_tree"/;
+		die "Failed to make watchman watch '$git_work_tree'.\n" .
+		    "Falling back to scanning...\n" if $? != 0;
+		$output = $json_pkg->new->utf8->decode($response);
+		$error = $output->{error};
+		die "Watchman: $error.\n" .
+		"Falling back to scanning...\n" if $error;
+
+		# Uncomment for debugging watchman output
+		# open (my $fh, ">", ".git/watchman-output.out");
+		# close $fh;
+
+		# Watchman will always return all files on the first query so
+		# return the fast "everything is dirty" flag to git and do the
+		# Watchman query just to get it over with now so we won't pay
+		# the cost in git to look up each individual file.
+		my $o = watchman_clock();
+		$error = $o->{error};
+
+		die "Watchman: $error.\n" .
+		"Falling back to scanning...\n" if $error;
+
+		output_result($o->{clock}, ("/"));
+		return 0;
+	}
+
+	die "Watchman: $error.\n" .
+	"Falling back to scanning...\n" if $error;
+
+	return 1;
+}
+
+sub get_working_dir {
+	my $working_dir;
+	if ($^O =~ 'msys' || $^O =~ 'cygwin') {
+		$working_dir = Win32::GetCwd();
+		$working_dir =~ tr/\\/\//;
+	} else {
+		require Cwd;
+		$working_dir = Cwd::cwd();
+	}
+
+	return $working_dir;
+}
@@ -0,0 +1,8 @@
+#!/bin/sh
+#
+# An example hook script to prepare a packed repository for use over
+# dumb transports.
+#
+# To enable this hook, rename this file to "post-update".
+
+exec git update-server-info
@@ -0,0 +1,14 @@
+#!/bin/sh
+#
+# An example hook script to verify what is about to be committed
+# by applypatch from an e-mail message.
+#
+# The hook should exit with non-zero status after issuing an
+# appropriate message if it wants to stop the commit.
+#
+# To enable this hook, rename this file to "pre-applypatch".
+
+. git-sh-setup
+precommit="$(git rev-parse --git-path hooks/pre-commit)"
+test -x "$precommit" && exec "$precommit" ${1+"$@"}
+:
@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# An example hook script to verify what is about to be committed.
+# Called by "git commit" with no arguments.  The hook should
+# exit with non-zero status after issuing an appropriate message if
+# it wants to stop the commit.
+#
+# To enable this hook, rename this file to "pre-commit".
+
+if git rev-parse --verify HEAD >/dev/null 2>&1
+then
+	against=HEAD
+else
+	# Initial commit: diff against an empty tree object
+	against=$(git hash-object -t tree /dev/null)
+fi
+
+# If you want to allow non-ASCII filenames set this variable to true.
+allownonascii=$(git config --type=bool hooks.allownonascii)
+
+# Redirect output to stderr.
+exec 1>&2
+
+# Cross platform projects tend to avoid non-ASCII filenames; prevent
+# them from being added to the repository. We exploit the fact that the
+# printable range starts at the space character and ends with tilde.
+if [ "$allownonascii" != "true" ] &&
+	# Note that the use of brackets around a tr range is ok here, (it's
+	# even required, for portability to Solaris 10's /usr/bin/tr), since
+	# the square bracket bytes happen to fall in the designated range.
+	test $(git diff-index --cached --name-only --diff-filter=A -z $against |
+	  LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0
+then
+	cat <<\EOF
+Error: Attempt to add a non-ASCII file name.
+
+This can cause problems if you want to work with people on other platforms.
+
+To be portable it is advisable to rename the file.
+
+If you know what you are doing you can disable this check using:
+
+  git config hooks.allownonascii true
+EOF
+	exit 1
+fi
+
+# If there are whitespace errors, print the offending file names and fail.
+exec git diff-index --check --cached $against --
@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# An example hook script to verify what is about to be committed.
+# Called by "git merge" with no arguments.  The hook should
+# exit with non-zero status after issuing an appropriate message to
+# stderr if it wants to stop the merge commit.
+#
+# To enable this hook, rename this file to "pre-merge-commit".
+
+. git-sh-setup
+test -x "$GIT_DIR/hooks/pre-commit" &&
+        exec "$GIT_DIR/hooks/pre-commit"
+:
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# An example hook script to verify what is about to be pushed.  Called by "git
+# push" after it has checked the remote status, but before anything has been
+# pushed.  If this script exits with a non-zero status nothing will be pushed.
+#
+# This hook is called with the following parameters:
+#
+# $1 -- Name of the remote to which the push is being done
+# $2 -- URL to which the push is being done
+#
+# If pushing without using a named remote those arguments will be equal.
+#
+# Information about the commits which are being pushed is supplied as lines to
+# the standard input in the form:
+#
+#   <local ref> <local oid> <remote ref> <remote oid>
+#
+# This sample shows how to prevent push of commits where the log message starts
+# with "WIP" (work in progress).
+
+remote="$1"
+url="$2"
+
+zero=$(git hash-object --stdin </dev/null | tr '[0-9a-f]' '0')
+
+while read local_ref local_oid remote_ref remote_oid
+do
+	if test "$local_oid" = "$zero"
+	then
+		# Handle delete
+		:
+	else
+		if test "$remote_oid" = "$zero"
+		then
+			# New branch, examine all commits
+			range="$local_oid"
+		else
+			# Update to existing branch, examine new commits
+			range="$remote_oid..$local_oid"
+		fi
+
+		# Check for WIP commit
+		commit=$(git rev-list -n 1 --grep '^WIP' "$range")
+		if test -n "$commit"
+		then
+			echo >&2 "Found WIP commit in $local_ref, not pushing"
+			exit 1
+		fi
+	fi
+done
+
+exit 0
@@ -0,0 +1,169 @@
+#!/bin/sh
+#
+# Copyright (c) 2006, 2008 Junio C Hamano
+#
+# The "pre-rebase" hook is run just before "git rebase" starts doing
+# its job, and can prevent the command from running by exiting with
+# non-zero status.
+#
+# The hook is called with the following parameters:
+#
+# $1 -- the upstream the series was forked from.
+# $2 -- the branch being rebased (or empty when rebasing the current branch).
+#
+# This sample shows how to prevent topic branches that are already
+# merged to 'next' branch from getting rebased, because allowing it
+# would result in rebasing already published history.
+
+publish=next
+basebranch="$1"
+if test "$#" = 2
+then
+	topic="refs/heads/$2"
+else
+	topic=`git symbolic-ref HEAD` ||
+	exit 0 ;# we do not interrupt rebasing detached HEAD
+fi
+
+case "$topic" in
+refs/heads/??/*)
+	;;
+*)
+	exit 0 ;# we do not interrupt others.
+	;;
+esac
+
+# Now we are dealing with a topic branch being rebased
+# on top of master.  Is it OK to rebase it?
+
+# Does the topic really exist?
+git show-ref -q "$topic" || {
+	echo >&2 "No such branch $topic"
+	exit 1
+}
+
+# Is topic fully merged to master?
+not_in_master=`git rev-list --pretty=oneline ^master "$topic"`
+if test -z "$not_in_master"
+then
+	echo >&2 "$topic is fully merged to master; better remove it."
+	exit 1 ;# we could allow it, but there is no point.
+fi
+
+# Is topic ever merged to next?  If so you should not be rebasing it.
+only_next_1=`git rev-list ^master "^$topic" ${publish} | sort`
+only_next_2=`git rev-list ^master           ${publish} | sort`
+if test "$only_next_1" = "$only_next_2"
+then
+	not_in_topic=`git rev-list "^$topic" master`
+	if test -z "$not_in_topic"
+	then
+		echo >&2 "$topic is already up to date with master"
+		exit 1 ;# we could allow it, but there is no point.
+	else
+		exit 0
+	fi
+else
+	not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"`
+	/usr/bin/perl -e '
+		my $topic = $ARGV[0];
+		my $msg = "* $topic has commits already merged to public branch:\n";
+		my (%not_in_next) = map {
+			/^([0-9a-f]+) /;
+			($1 => 1);
+		} split(/\n/, $ARGV[1]);
+		for my $elem (map {
+				/^([0-9a-f]+) (.*)$/;
+				[$1 => $2];
+			} split(/\n/, $ARGV[2])) {
+			if (!exists $not_in_next{$elem->[0]}) {
+				if ($msg) {
+					print STDERR $msg;
+					undef $msg;
+				}
+				print STDERR " $elem->[1]\n";
+			}
+		}
+	' "$topic" "$not_in_next" "$not_in_master"
+	exit 1
+fi
+
+<<\DOC_END
+
+This sample hook safeguards topic branches that have been
+published from being rewound.
+
+The workflow assumed here is:
+
+ * Once a topic branch forks from "master", "master" is never
+   merged into it again (either directly or indirectly).
+
+ * Once a topic branch is fully cooked and merged into "master",
+   it is deleted.  If you need to build on top of it to correct
+   earlier mistakes, a new topic branch is created by forking at
+   the tip of the "master".  This is not strictly necessary, but
+   it makes it easier to keep your history simple.
+
+ * Whenever you need to test or publish your changes to topic
+   branches, merge them into "next" branch.
+
+The script, being an example, hardcodes the publish branch name
+to be "next", but it is trivial to make it configurable via
+$GIT_DIR/config mechanism.
+
+With this workflow, you would want to know:
+
+(1) ... if a topic branch has ever been merged to "next".  Young
+    topic branches can have stupid mistakes you would rather
+    clean up before publishing, and things that have not been
+    merged into other branches can be easily rebased without
+    affecting other people.  But once it is published, you would
+    not want to rewind it.
+
+(2) ... if a topic branch has been fully merged to "master".
+    Then you can delete it.  More importantly, you should not
+    build on top of it -- other people may already want to
+    change things related to the topic as patches against your
+    "master", so if you need further changes, it is better to
+    fork the topic (perhaps with the same name) afresh from the
+    tip of "master".
+
+Let's look at this example:
+
+		   o---o---o---o---o---o---o---o---o---o "next"
+		  /       /           /           /
+		 /   a---a---b A     /           /
+		/   /               /           /
+	       /   /   c---c---c---c B         /
+	      /   /   /             \         /
+	     /   /   /   b---b C     \       /
+	    /   /   /   /             \     /
+    ---o---o---o---o---o---o---o---o---o---o---o "master"
+
+
+A, B and C are topic branches.
+
+ * A has one fix since it was merged up to "next".
+
+ * B has finished.  It has been fully merged up to "master" and "next",
+   and is ready to be deleted.
+
+ * C has not merged to "next" at all.
+
+We would want to allow C to be rebased, refuse A, and encourage
+B to be deleted.
+
+To compute (1):
+
+	git rev-list ^master ^topic next
+	git rev-list ^master        next
+
+	if these match, topic has not merged in next at all.
+
+To compute (2):
+
+	git rev-list master..topic
+
+	if this is empty, it is fully merged to "master".
+
+DOC_END
@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+# An example hook script to make use of push options.
+# The example simply echoes all push options that start with 'echoback='
+# and rejects all pushes when the "reject" push option is used.
+#
+# To enable this hook, rename this file to "pre-receive".
+
+if test -n "$GIT_PUSH_OPTION_COUNT"
+then
+	i=0
+	while test "$i" -lt "$GIT_PUSH_OPTION_COUNT"
+	do
+		eval "value=\$GIT_PUSH_OPTION_$i"
+		case "$value" in
+		echoback=*)
+			echo "echo from the pre-receive-hook: ${value#*=}" >&2
+			;;
+		reject)
+			exit 1
+		esac
+		i=$((i + 1))
+	done
+fi
@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# An example hook script to prepare the commit log message.
+# Called by "git commit" with the name of the file that has the
+# commit message, followed by the description of the commit
+# message's source.  The hook's purpose is to edit the commit
+# message file.  If the hook fails with a non-zero status,
+# the commit is aborted.
+#
+# To enable this hook, rename this file to "prepare-commit-msg".
+
+# This hook includes three examples. The first one removes the
+# "# Please enter the commit message..." help message.
+#
+# The second includes the output of "git diff --name-status -r"
+# into the message, just before the "git status" output.  It is
+# commented because it doesn't cope with --amend or with squashed
+# commits.
+#
+# The third example adds a Signed-off-by line to the message, that can
+# still be edited.  This is rarely a good idea.
+
+COMMIT_MSG_FILE=$1
+COMMIT_SOURCE=$2
+SHA1=$3
+
+/usr/bin/perl -i.bak -ne 'print unless(m/^. Please enter the commit message/..m/^#$/)' "$COMMIT_MSG_FILE"
+
+# case "$COMMIT_SOURCE,$SHA1" in
+#  ,|template,)
+#    /usr/bin/perl -i.bak -pe '
+#       print "\n" . `git diff --cached --name-status -r`
+# 	 if /^#/ && $first++ == 0' "$COMMIT_MSG_FILE" ;;
+#  *) ;;
+# esac
+
+# SOB=$(git var GIT_COMMITTER_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
+# git interpret-trailers --in-place --trailer "$SOB" "$COMMIT_MSG_FILE"
+# if test -z "$COMMIT_SOURCE"
+# then
+#   /usr/bin/perl -i.bak -pe 'print "\n" if !$first_line++' "$COMMIT_MSG_FILE"
+# fi
@@ -0,0 +1,78 @@
+#!/bin/sh
+
+# An example hook script to update a checked-out tree on a git push.
+#
+# This hook is invoked by git-receive-pack(1) when it reacts to git
+# push and updates reference(s) in its repository, and when the push
+# tries to update the branch that is currently checked out and the
+# receive.denyCurrentBranch configuration variable is set to
+# updateInstead.
+#
+# By default, such a push is refused if the working tree and the index
+# of the remote repository has any difference from the currently
+# checked out commit; when both the working tree and the index match
+# the current commit, they are updated to match the newly pushed tip
+# of the branch. This hook is to be used to override the default
+# behaviour; however the code below reimplements the default behaviour
+# as a starting point for convenient modification.
+#
+# The hook receives the commit with which the tip of the current
+# branch is going to be updated:
+commit=$1
+
+# It can exit with a non-zero status to refuse the push (when it does
+# so, it must not modify the index or the working tree).
+die () {
+	echo >&2 "$*"
+	exit 1
+}
+
+# Or it can make any necessary changes to the working tree and to the
+# index to bring them to the desired state when the tip of the current
+# branch is updated to the new commit, and exit with a zero status.
+#
+# For example, the hook can simply run git read-tree -u -m HEAD "$1"
+# in order to emulate git fetch that is run in the reverse direction
+# with git push, as the two-tree form of git read-tree -u -m is
+# essentially the same as git switch or git checkout that switches
+# branches while keeping the local changes in the working tree that do
+# not interfere with the difference between the branches.
+
+# The below is a more-or-less exact translation to shell of the C code
+# for the default behaviour for git's push-to-checkout hook defined in
+# the push_to_deploy() function in builtin/receive-pack.c.
+#
+# Note that the hook will be executed from the repository directory,
+# not from the working tree, so if you want to perform operations on
+# the working tree, you will have to adapt your code accordingly, e.g.
+# by adding "cd .." or using relative paths.
+
+if ! git update-index -q --ignore-submodules --refresh
+then
+	die "Up-to-date check failed"
+fi
+
+if ! git diff-files --quiet --ignore-submodules --
+then
+	die "Working directory has unstaged changes"
+fi
+
+# This is a rough translation of:
+#
+#   head_has_history() ? "HEAD" : EMPTY_TREE_SHA1_HEX
+if git cat-file -e HEAD 2>/dev/null
+then
+	head=HEAD
+else
+	head=$(git hash-object -t tree --stdin </dev/null)
+fi
+
+if ! git diff-index --quiet --cached --ignore-submodules $head --
+then
+	die "Working directory has staged changes"
+fi
+
+if ! git read-tree -u -m "$commit"
+then
+	die "Could not update working tree to new HEAD"
+fi
@@ -0,0 +1,77 @@
+#!/bin/sh
+
+# An example hook script to validate a patch (and/or patch series) before
+# sending it via email.
+#
+# The hook should exit with non-zero status after issuing an appropriate
+# message if it wants to prevent the email(s) from being sent.
+#
+# To enable this hook, rename this file to "sendemail-validate".
+#
+# By default, it will only check that the patch(es) can be applied on top of
+# the default upstream branch without conflicts in a secondary worktree. After
+# validation (successful or not) of the last patch of a series, the worktree
+# will be deleted.
+#
+# The following config variables can be set to change the default remote and
+# remote ref that are used to apply the patches against:
+#
+#   sendemail.validateRemote (default: origin)
+#   sendemail.validateRemoteRef (default: HEAD)
+#
+# Replace the TODO placeholders with appropriate checks according to your
+# needs.
+
+validate_cover_letter () {
+	file="$1"
+	# TODO: Replace with appropriate checks (e.g. spell checking).
+	true
+}
+
+validate_patch () {
+	file="$1"
+	# Ensure that the patch applies without conflicts.
+	git am -3 "$file" || return
+	# TODO: Replace with appropriate checks for this patch
+	# (e.g. checkpatch.pl).
+	true
+}
+
+validate_series () {
+	# TODO: Replace with appropriate checks for the whole series
+	# (e.g. quick build, coding style checks, etc.).
+	true
+}
+
+# main -------------------------------------------------------------------------
+
+if test "$GIT_SENDEMAIL_FILE_COUNTER" = 1
+then
+	remote=$(git config --default origin --get sendemail.validateRemote) &&
+	ref=$(git config --default HEAD --get sendemail.validateRemoteRef) &&
+	worktree=$(mktemp --tmpdir -d sendemail-validate.XXXXXXX) &&
+	git worktree add -fd --checkout "$worktree" "refs/remotes/$remote/$ref" &&
+	git config --replace-all sendemail.validateWorktree "$worktree"
+else
+	worktree=$(git config --get sendemail.validateWorktree)
+fi || {
+	echo "sendemail-validate: error: failed to prepare worktree" >&2
+	exit 1
+}
+
+unset GIT_DIR GIT_WORK_TREE
+cd "$worktree" &&
+
+if grep -q "^diff --git " "$1"
+then
+	validate_patch "$1"
+else
+	validate_cover_letter "$1"
+fi &&
+
+if test "$GIT_SENDEMAIL_FILE_COUNTER" = "$GIT_SENDEMAIL_FILE_TOTAL"
+then
+	git config --unset-all sendemail.validateWorktree &&
+	trap 'git worktree remove -ff "$worktree"' EXIT &&
+	validate_series
+fi
@@ -0,0 +1,128 @@
+#!/bin/sh
+#
+# An example hook script to block unannotated tags from entering.
+# Called by "git receive-pack" with arguments: refname sha1-old sha1-new
+#
+# To enable this hook, rename this file to "update".
+#
+# Config
+# ------
+# hooks.allowunannotated
+#   This boolean sets whether unannotated tags will be allowed into the
+#   repository.  By default they won't be.
+# hooks.allowdeletetag
+#   This boolean sets whether deleting tags will be allowed in the
+#   repository.  By default they won't be.
+# hooks.allowmodifytag
+#   This boolean sets whether a tag may be modified after creation. By default
+#   it won't be.
+# hooks.allowdeletebranch
+#   This boolean sets whether deleting branches will be allowed in the
+#   repository.  By default they won't be.
+# hooks.denycreatebranch
+#   This boolean sets whether remotely creating branches will be denied
+#   in the repository.  By default this is allowed.
+#
+
+# --- Command line
+refname="$1"
+oldrev="$2"
+newrev="$3"
+
+# --- Safety check
+if [ -z "$GIT_DIR" ]; then
+	echo "Don't run this script from the command line." >&2
+	echo " (if you want, you could supply GIT_DIR then run" >&2
+	echo "  $0 <ref> <oldrev> <newrev>)" >&2
+	exit 1
+fi
+
+if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then
+	echo "usage: $0 <ref> <oldrev> <newrev>" >&2
+	exit 1
+fi
+
+# --- Config
+allowunannotated=$(git config --type=bool hooks.allowunannotated)
+allowdeletebranch=$(git config --type=bool hooks.allowdeletebranch)
+denycreatebranch=$(git config --type=bool hooks.denycreatebranch)
+allowdeletetag=$(git config --type=bool hooks.allowdeletetag)
+allowmodifytag=$(git config --type=bool hooks.allowmodifytag)
+
+# check for no description
+projectdesc=$(sed -e '1q' "$GIT_DIR/description")
+case "$projectdesc" in
+"Unnamed repository"* | "")
+	echo "*** Project description file hasn't been set" >&2
+	exit 1
+	;;
+esac
+
+# --- Check types
+# if $newrev is 0000...0000, it's a commit to delete a ref.
+zero=$(git hash-object --stdin </dev/null | tr '[0-9a-f]' '0')
+if [ "$newrev" = "$zero" ]; then
+	newrev_type=delete
+else
+	newrev_type=$(git cat-file -t $newrev)
+fi
+
+case "$refname","$newrev_type" in
+	refs/tags/*,commit)
+		# un-annotated tag
+		short_refname=${refname##refs/tags/}
+		if [ "$allowunannotated" != "true" ]; then
+			echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2
+			echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2
+			exit 1
+		fi
+		;;
+	refs/tags/*,delete)
+		# delete tag
+		if [ "$allowdeletetag" != "true" ]; then
+			echo "*** Deleting a tag is not allowed in this repository" >&2
+			exit 1
+		fi
+		;;
+	refs/tags/*,tag)
+		# annotated tag
+		if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1
+		then
+			echo "*** Tag '$refname' already exists." >&2
+			echo "*** Modifying a tag is not allowed in this repository." >&2
+			exit 1
+		fi
+		;;
+	refs/heads/*,commit)
+		# branch
+		if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then
+			echo "*** Creating a branch is not allowed in this repository" >&2
+			exit 1
+		fi
+		;;
+	refs/heads/*,delete)
+		# delete branch
+		if [ "$allowdeletebranch" != "true" ]; then
+			echo "*** Deleting a branch is not allowed in this repository" >&2
+			exit 1
+		fi
+		;;
+	refs/remotes/*,commit)
+		# tracking branch
+		;;
+	refs/remotes/*,delete)
+		# delete tracking branch
+		if [ "$allowdeletebranch" != "true" ]; then
+			echo "*** Deleting a tracking branch is not allowed in this repository" >&2
+			exit 1
+		fi
+		;;
+	*)
+		# Anything else (is there anything else?)
+		echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2
+		exit 1
+		;;
+esac
+
+# --- Finished
+exit 0
@@ -0,0 +1 @@
+* -export-subst -export-ignore
@@ -0,0 +1,6 @@
+# git ls-files --others --exclude-from=.git/info/exclude
+# Lines that start with '#' are comments.
+# For a project mostly in C, the following would be a good set of
+# exclude patterns (uncomment them if you want to use them):
+# *.[oa]
+# *~
@@ -0,0 +1,2 @@
+# pack-refs with: peeled fully-peeled sorted 
+e8c6e58b1306119e51297b02f0b449fa7300416d refs/heads/master
@@ -1,4 +1,4 @@
-_commit='7511545ee20664e3b8b8d3322c0ffe7567c56f7a'
+_commit='11ca60be22b063478ed9586ca1d7f92f0f261caf'
 # Useful links:
 # https://git.outfoxxed.me/quickshell/quickshell/commits/branch/master
 # https://aur.archlinux.org/packages/quickshell-git
@@ -8,7 +8,7 @@ _prefix='illogical-impulse'
 _pkgname=quickshell
 pkgname="$_prefix-$_pkgname-git"
 pkgver=0.1.0.r1
-pkgrel=8
+pkgrel=9
 pkgdesc="$_pkgname-git pinned commit and extra deps for $_prefix"
 arch=(x86_64 aarch64)
 url='https://git.outfoxxed.me/quickshell/quickshell'
@@ -0,0 +1,52 @@
+# Generated by makepkg 7.1.0
+# using fakeroot version 1.37.2
+pkgname = illogical-impulse-quickshell-git
+pkgbase = illogical-impulse-quickshell-git
+xdata = pkgtype=pkg
+pkgver = 0.1.0.r1-9
+pkgdesc = quickshell-git pinned commit and extra deps for illogical-impulse
+url = https://git.outfoxxed.me/quickshell/quickshell
+builddate = 1791439825
+packager = Unknown Packager
+size = 198896342
+arch = x86_64
+license = LGPL-3.0-only
+group = illogical-impulse
+conflict = quickshell
+conflict = quickshell-git
+provides = quickshell
+provides = quickshell-git
+depend = cpptrace
+depend = jemalloc
+depend = mesa
+depend = qt6-declarative
+depend = qt6-base
+depend = qt6-svg
+depend = libdrm
+depend = libpipewire
+depend = libxcb
+depend = wayland
+depend = qt6-5compat
+depend = qt6-avif-image-plugin
+depend = qt6-imageformats
+depend = qt6-multimedia
+depend = qt6-positioning
+depend = qt6-quicktimeline
+depend = qt6-sensors
+depend = qt6-svg
+depend = qt6-tools
+depend = qt6-translations
+depend = qt6-virtualkeyboard
+depend = qt6-wayland
+depend = kirigami
+depend = kdialog
+depend = syntax-highlighting
+makedepend = cli11
+makedepend = cmake
+makedepend = git
+makedepend = ninja
+makedepend = qt6-shadertools
+makedepend = spirv-tools
+makedepend = vulkan-headers
+makedepend = wayland
+makedepend = wayland-protocols
@@ -0,0 +1 @@
+/usr/bin/quickshell
@@ -0,0 +1,8 @@
+module Quickshell.Bluetooth
+linktarget quickshell-bluetoothplugin
+optional plugin quickshell-bluetoothplugin
+classname Quickshell_BluetoothPlugin
+typeinfo quickshell-bluetooth.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Bluetooth/
+
@@ -0,0 +1,411 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "adapter.hpp"
+        lineNumber: 57
+        name: "qs::bluetooth::BluetoothAdapter"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Bluetooth/BluetoothAdapter 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "name"
+            type: "QString"
+            bindable: "bindableName"
+            read: "default"
+            notify: "nameChanged"
+            index: 0
+            lineNumber: 63
+            isReadonly: true
+        }
+        Property {
+            name: "enabled"
+            type: "bool"
+            read: "enabled"
+            write: "setEnabled"
+            notify: "enabledChanged"
+            index: 1
+            lineNumber: 65
+        }
+        Property {
+            name: "state"
+            type: "BluetoothAdapterState::Enum"
+            bindable: "bindableState"
+            read: "default"
+            notify: "stateChanged"
+            index: 2
+            lineNumber: 67
+            isReadonly: true
+        }
+        Property {
+            name: "discoverable"
+            type: "bool"
+            read: "discoverable"
+            write: "setDiscoverable"
+            notify: "discoverableChanged"
+            index: 3
+            lineNumber: 69
+        }
+        Property {
+            name: "discoverableTimeout"
+            type: "uint"
+            read: "discoverableTimeout"
+            write: "setDiscoverableTimeout"
+            notify: "discoverableTimeoutChanged"
+            index: 4
+            lineNumber: 72
+        }
+        Property {
+            name: "discovering"
+            type: "bool"
+            read: "discovering"
+            write: "setDiscovering"
+            notify: "discoveringChanged"
+            index: 5
+            lineNumber: 74
+        }
+        Property {
+            name: "pairable"
+            type: "bool"
+            read: "pairable"
+            write: "setPairable"
+            notify: "pairableChanged"
+            index: 6
+            lineNumber: 79
+        }
+        Property {
+            name: "pairableTimeout"
+            type: "uint"
+            read: "pairableTimeout"
+            write: "setPairableTimeout"
+            notify: "pairableTimeoutChanged"
+            index: 7
+            lineNumber: 82
+        }
+        Property {
+            name: "devices"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "devices"
+            index: 8
+            lineNumber: 85
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "adapterId"
+            type: "QString"
+            read: "adapterId"
+            index: 9
+            lineNumber: 87
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "dbusPath"
+            type: "QString"
+            read: "path"
+            index: 10
+            lineNumber: 89
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Signal { name: "nameChanged"; lineNumber: 136 }
+        Signal { name: "enabledChanged"; lineNumber: 137 }
+        Signal { name: "stateChanged"; lineNumber: 138 }
+        Signal { name: "discoverableChanged"; lineNumber: 139 }
+        Signal { name: "discoverableTimeoutChanged"; lineNumber: 140 }
+        Signal { name: "discoveringChanged"; lineNumber: 141 }
+        Signal { name: "pairableChanged"; lineNumber: 142 }
+        Signal { name: "pairableTimeoutChanged"; lineNumber: 143 }
+    }
+    Component {
+        file: "adapter.hpp"
+        lineNumber: 15
+        name: "qs::bluetooth::BluetoothAdapterState"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Bluetooth/BluetoothAdapterState 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 21
+            values: [
+                "Disabled",
+                "Enabled",
+                "Enabling",
+                "Disabling",
+                "Blocked"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 35
+            Parameter { name: "state"; type: "BluetoothAdapterState::Enum" }
+        }
+    }
+    Component {
+        file: "device.hpp"
+        lineNumber: 55
+        name: "qs::bluetooth::BluetoothDevice"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Bluetooth/BluetoothDevice 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "address"
+            type: "QString"
+            bindable: "bindableAddress"
+            read: "default"
+            notify: "addressChanged"
+            index: 0
+            lineNumber: 61
+            isReadonly: true
+        }
+        Property {
+            name: "name"
+            type: "QString"
+            read: "name"
+            write: "setName"
+            notify: "nameChanged"
+            index: 1
+            lineNumber: 66
+        }
+        Property {
+            name: "deviceName"
+            type: "QString"
+            bindable: "bindableDeviceName"
+            read: "default"
+            notify: "deviceNameChanged"
+            index: 2
+            lineNumber: 69
+            isReadonly: true
+        }
+        Property {
+            name: "icon"
+            type: "QString"
+            bindable: "bindableIcon"
+            read: "default"
+            notify: "iconChanged"
+            index: 3
+            lineNumber: 71
+            isReadonly: true
+        }
+        Property {
+            name: "state"
+            type: "BluetoothDeviceState::Enum"
+            bindable: "bindableState"
+            read: "default"
+            notify: "stateChanged"
+            index: 4
+            lineNumber: 73
+            isReadonly: true
+        }
+        Property {
+            name: "connected"
+            type: "bool"
+            read: "connected"
+            write: "setConnected"
+            notify: "connectedChanged"
+            index: 5
+            lineNumber: 79
+        }
+        Property {
+            name: "paired"
+            type: "bool"
+            bindable: "bindablePaired"
+            read: "default"
+            notify: "pairedChanged"
+            index: 6
+            lineNumber: 83
+            isReadonly: true
+        }
+        Property {
+            name: "bonded"
+            type: "bool"
+            bindable: "bindableBonded"
+            read: "default"
+            notify: "bondedChanged"
+            index: 7
+            lineNumber: 85
+            isReadonly: true
+        }
+        Property {
+            name: "pairing"
+            type: "bool"
+            read: "pairing"
+            notify: "pairingChanged"
+            index: 8
+            lineNumber: 89
+            isReadonly: true
+        }
+        Property {
+            name: "trusted"
+            type: "bool"
+            read: "trusted"
+            write: "setTrusted"
+            notify: "trustedChanged"
+            index: 9
+            lineNumber: 92
+        }
+        Property {
+            name: "blocked"
+            type: "bool"
+            read: "blocked"
+            write: "setBlocked"
+            notify: "blockedChanged"
+            index: 10
+            lineNumber: 95
+        }
+        Property {
+            name: "wakeAllowed"
+            type: "bool"
+            read: "wakeAllowed"
+            write: "setWakeAllowed"
+            notify: "wakeAllowedChanged"
+            index: 11
+            lineNumber: 97
+        }
+        Property {
+            name: "batteryAvailable"
+            type: "bool"
+            read: "batteryAvailable"
+            notify: "batteryAvailableChanged"
+            index: 12
+            lineNumber: 99
+            isReadonly: true
+        }
+        Property {
+            name: "battery"
+            type: "double"
+            bindable: "bindableBattery"
+            read: "default"
+            notify: "batteryChanged"
+            index: 13
+            lineNumber: 101
+            isReadonly: true
+        }
+        Property {
+            name: "adapter"
+            type: "BluetoothAdapter"
+            isPointer: true
+            read: "adapter"
+            notify: "adapterChanged"
+            index: 14
+            lineNumber: 103
+            isReadonly: true
+        }
+        Property {
+            name: "dbusPath"
+            type: "QString"
+            read: "path"
+            index: 15
+            lineNumber: 105
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Signal { name: "addressChanged"; lineNumber: 167 }
+        Signal { name: "deviceNameChanged"; lineNumber: 168 }
+        Signal { name: "nameChanged"; lineNumber: 169 }
+        Signal { name: "connectedChanged"; lineNumber: 170 }
+        Signal { name: "stateChanged"; lineNumber: 171 }
+        Signal { name: "pairedChanged"; lineNumber: 172 }
+        Signal { name: "bondedChanged"; lineNumber: 173 }
+        Signal { name: "pairingChanged"; lineNumber: 174 }
+        Signal { name: "trustedChanged"; lineNumber: 175 }
+        Signal { name: "blockedChanged"; lineNumber: 176 }
+        Signal { name: "wakeAllowedChanged"; lineNumber: 177 }
+        Signal { name: "iconChanged"; lineNumber: 178 }
+        Signal { name: "batteryAvailableChanged"; lineNumber: 179 }
+        Signal { name: "batteryChanged"; lineNumber: 180 }
+        Signal { name: "adapterChanged"; lineNumber: 181 }
+        Method { name: "connect"; lineNumber: 112 }
+        Method { name: "disconnect"; lineNumber: 114 }
+        Method { name: "pair"; lineNumber: 118 }
+        Method { name: "cancelPair"; lineNumber: 120 }
+        Method { name: "forget"; lineNumber: 122 }
+    }
+    Component {
+        file: "device.hpp"
+        lineNumber: 14
+        name: "qs::bluetooth::BluetoothDeviceState"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Bluetooth/BluetoothDeviceState 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 20
+            values: [
+                "Disconnected",
+                "Connected",
+                "Disconnecting",
+                "Connecting"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 32
+            Parameter { name: "state"; type: "BluetoothDeviceState::Enum" }
+        }
+    }
+    Component {
+        file: "bluez.hpp"
+        lineNumber: 63
+        name: "qs::bluetooth::BluezQml"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Bluetooth/Bluetooth 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "defaultAdapter"
+            type: "BluetoothAdapter"
+            isPointer: true
+            bindable: "bindableDefaultAdapter"
+            read: "default"
+            notify: "defaultAdapterChanged"
+            index: 0
+            lineNumber: 69
+            isReadonly: true
+        }
+        Property {
+            name: "adapters"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "adapters"
+            index: 1
+            lineNumber: 72
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "devices"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "devices"
+            index: 2
+            lineNumber: 76
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Signal { name: "defaultAdapterChanged"; lineNumber: 80 }
+    }
+}
@@ -0,0 +1,10 @@
+module Quickshell.DBusMenu
+linktarget quickshell-dbusmenuplugin
+optional plugin quickshell-dbusmenuplugin
+classname Quickshell_DBusMenuPlugin
+typeinfo quickshell-dbusmenu.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/DBusMenu/
+depends Quickshell
+depends QtQuick
+
@@ -0,0 +1,67 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "dbusmenu.hpp"
+        lineNumber: 118
+        name: "qs::dbus::dbusmenu::DBusMenu"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.DBusMenu/DBusMenuHandle 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "menu"
+            type: "qs::dbus::dbusmenu::DBusMenuItem"
+            isPointer: true
+            read: "menu"
+            index: 0
+            lineNumber: 120
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Signal { name: "iconThemePathChanged"; lineNumber: 130 }
+        Method {
+            name: "onLayoutUpdated"
+            lineNumber: 146
+            Parameter { name: "revision"; type: "uint" }
+            Parameter { name: "parent"; type: "int" }
+        }
+        Method {
+            name: "onItemPropertiesUpdated"
+            lineNumber: 147
+            Parameter { name: "updatedProps"; type: "DBusMenuItemPropertiesList" }
+            Parameter { name: "removedProps"; type: "DBusMenuItemPropertyNamesList" }
+        }
+    }
+    Component {
+        file: "dbusmenu.hpp"
+        lineNumber: 48
+        name: "qs::dbus::dbusmenu::DBusMenuItem"
+        accessSemantics: "reference"
+        prototype: "QsMenuEntry"
+        exports: ["Quickshell.DBusMenu/DBusMenuItem 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "menuHandle"
+            type: "qs::dbus::dbusmenu::DBusMenu"
+            isPointer: true
+            read: "menuHandle"
+            index: 0
+            lineNumber: 51
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Signal { name: "layoutUpdated"; lineNumber: 92 }
+        Method { name: "sendOpened"; isMethodConstant: true; lineNumber: 95 }
+        Method { name: "sendClosed"; isMethodConstant: true; lineNumber: 96 }
+        Method { name: "sendTriggered"; isMethodConstant: true; lineNumber: 97 }
+        Method { name: "updateLayout"; isMethodConstant: true; lineNumber: 64 }
+    }
+}
@@ -0,0 +1,10 @@
+module Quickshell.Hyprland._FocusGrab
+linktarget quickshell-hyprland-focus-grabplugin
+optional plugin quickshell-hyprland-focus-grabplugin
+classname Quickshell_Hyprland__FocusGrabPlugin
+typeinfo quickshell-hyprland-focus-grab.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Hyprland/_FocusGrab/
+depends Quickshell
+depends QtQuick
+
@@ -0,0 +1,48 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "qml.hpp"
+        lineNumber: 55
+        name: "qs::hyprland::HyprlandFocusGrab"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        interfaces: ["QQmlParserStatus"]
+        exports: ["Quickshell.Hyprland._FocusGrab/HyprlandFocusGrab 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "active"
+            type: "bool"
+            read: "isActive"
+            write: "setActive"
+            notify: "activeChanged"
+            index: 0
+            lineNumber: 68
+        }
+        Property {
+            name: "windows"
+            type: "QObjectList"
+            read: "windows"
+            write: "setWindows"
+            notify: "windowsChanged"
+            index: 1
+            lineNumber: 70
+        }
+        Signal { name: "cleared"; lineNumber: 90 }
+        Signal { name: "activeChanged"; lineNumber: 92 }
+        Signal { name: "windowsChanged"; lineNumber: 93 }
+        Method { name: "onGrabActivated"; lineNumber: 96 }
+        Method { name: "onGrabCleared"; lineNumber: 97 }
+        Method { name: "onProxyConnected"; lineNumber: 98 }
+        Method {
+            name: "onObjectDestroyed"
+            lineNumber: 99
+            Parameter { name: "object"; type: "QObject"; isPointer: true }
+        }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Hyprland._GlobalShortcuts
+linktarget quickshell-hyprland-global-shortcutsplugin
+optional plugin quickshell-hyprland-global-shortcutsplugin
+classname Quickshell_Hyprland__GlobalShortcutsPlugin
+typeinfo quickshell-hyprland-global-shortcuts.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Hyprland/_GlobalShortcuts/
+depends QtQuick
+
@@ -0,0 +1,72 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "qml.hpp"
+        lineNumber: 35
+        name: "qs::hyprland::global_shortcuts::GlobalShortcut"
+        accessSemantics: "reference"
+        prototype: "PostReloadHook"
+        exports: ["Quickshell.Hyprland._GlobalShortcuts/GlobalShortcut 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "pressed"
+            type: "bool"
+            read: "isPressed"
+            notify: "pressedChanged"
+            index: 0
+            lineNumber: 41
+            isReadonly: true
+        }
+        Property {
+            name: "appid"
+            type: "QString"
+            read: "appid"
+            write: "setAppid"
+            notify: "appidChanged"
+            index: 1
+            lineNumber: 47
+        }
+        Property {
+            name: "name"
+            type: "QString"
+            read: "name"
+            write: "setName"
+            notify: "nameChanged"
+            index: 2
+            lineNumber: 50
+        }
+        Property {
+            name: "description"
+            type: "QString"
+            read: "description"
+            write: "setDescription"
+            notify: "descriptionChanged"
+            index: 3
+            lineNumber: 53
+        }
+        Property {
+            name: "triggerDescription"
+            type: "QString"
+            read: "triggerDescription"
+            write: "setTriggerDescription"
+            notify: "triggerDescriptionChanged"
+            index: 4
+            lineNumber: 55
+        }
+        Signal { name: "pressed"; lineNumber: 82 }
+        Signal { name: "released"; lineNumber: 84 }
+        Signal { name: "pressedChanged"; lineNumber: 86 }
+        Signal { name: "appidChanged"; lineNumber: 87 }
+        Signal { name: "nameChanged"; lineNumber: 88 }
+        Signal { name: "descriptionChanged"; lineNumber: 89 }
+        Signal { name: "triggerDescriptionChanged"; lineNumber: 90 }
+        Method { name: "onPressed"; lineNumber: 93 }
+        Method { name: "onReleased"; lineNumber: 94 }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Hyprland._Ipc
+linktarget quickshell-hyprland-ipcplugin
+optional plugin quickshell-hyprland-ipcplugin
+classname Quickshell_Hyprland__IpcPlugin
+typeinfo quickshell-hyprland-ipc.qmltypes
+depends QtQuick
+prefer :/qt/qml/Quickshell/Hyprland/_Ipc/
+depends Quickshell
+
@@ -0,0 +1,538 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "connection.hpp"
+        lineNumber: 40
+        name: "qs::hyprland::ipc::HyprlandIpcEvent"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Hyprland._Ipc/HyprlandEvent 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "name"
+            type: "QString"
+            read: "nameStr"
+            index: 0
+            lineNumber: 45
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "data"
+            type: "QString"
+            read: "dataStr"
+            index: 1
+            lineNumber: 47
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Method {
+            name: "parse"
+            type: "QString"
+            isList: true
+            isMethodConstant: true
+            lineNumber: 58
+            Parameter { name: "argumentCount"; type: "int" }
+        }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 16
+        name: "qs::hyprland::ipc::HyprlandIpcQml"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Hyprland._Ipc/Hyprland 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "usingLua"
+            type: "bool"
+            bindable: "bindableUsingLua"
+            read: "default"
+            notify: "usingLuaChanged"
+            index: 0
+            lineNumber: 22
+            isReadonly: true
+        }
+        Property {
+            name: "requestSocketPath"
+            type: "QString"
+            read: "requestSocketPath"
+            index: 1
+            lineNumber: 24
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "eventSocketPath"
+            type: "QString"
+            read: "eventSocketPath"
+            index: 2
+            lineNumber: 26
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "focusedMonitor"
+            type: "qs::hyprland::ipc::HyprlandMonitor"
+            isPointer: true
+            bindable: "bindableFocusedMonitor"
+            read: "default"
+            notify: "focusedMonitorChanged"
+            index: 3
+            lineNumber: 28
+            isReadonly: true
+        }
+        Property {
+            name: "focusedWorkspace"
+            type: "qs::hyprland::ipc::HyprlandWorkspace"
+            isPointer: true
+            bindable: "bindableFocusedWorkspace"
+            read: "default"
+            notify: "focusedWorkspaceChanged"
+            index: 4
+            lineNumber: 30
+            isReadonly: true
+        }
+        Property {
+            name: "activeToplevel"
+            type: "qs::hyprland::ipc::HyprlandToplevel"
+            isPointer: true
+            bindable: "bindableActiveToplevel"
+            read: "default"
+            notify: "activeToplevelChanged"
+            index: 5
+            lineNumber: 32
+            isReadonly: true
+        }
+        Property {
+            name: "monitors"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "monitors"
+            index: 6
+            lineNumber: 35
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "workspaces"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "workspaces"
+            index: 7
+            lineNumber: 40
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "toplevels"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "toplevels"
+            index: 8
+            lineNumber: 43
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Signal {
+            name: "rawEvent"
+            lineNumber: 89
+            Parameter { name: "event"; type: "qs::hyprland::ipc::HyprlandIpcEvent"; isPointer: true }
+        }
+        Signal { name: "usingLuaChanged"; lineNumber: 91 }
+        Signal { name: "focusedMonitorChanged"; lineNumber: 92 }
+        Signal { name: "focusedWorkspaceChanged"; lineNumber: 93 }
+        Signal { name: "activeToplevelChanged"; lineNumber: 94 }
+        Method {
+            name: "dispatch"
+            lineNumber: 52
+            Parameter { name: "request"; type: "QString" }
+        }
+        Method {
+            name: "monitorFor"
+            type: "HyprlandMonitor"
+            isPointer: true
+            lineNumber: 55
+            Parameter { name: "screen"; type: "QuickshellScreenInfo"; isPointer: true }
+        }
+        Method { name: "refreshMonitors"; lineNumber: 61 }
+        Method { name: "refreshWorkspaces"; lineNumber: 67 }
+        Method { name: "refreshToplevels"; lineNumber: 73 }
+    }
+    Component {
+        file: "monitor.hpp"
+        lineNumber: 17
+        name: "qs::hyprland::ipc::HyprlandMonitor"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Hyprland._Ipc/HyprlandMonitor 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "id"
+            type: "int"
+            bindable: "bindableId"
+            read: "default"
+            notify: "idChanged"
+            index: 0
+            lineNumber: 20
+            isReadonly: true
+        }
+        Property {
+            name: "name"
+            type: "QString"
+            bindable: "bindableName"
+            read: "default"
+            notify: "nameChanged"
+            index: 1
+            lineNumber: 21
+            isReadonly: true
+        }
+        Property {
+            name: "description"
+            type: "QString"
+            bindable: "bindableDescription"
+            read: "default"
+            notify: "descriptionChanged"
+            index: 2
+            lineNumber: 22
+            isReadonly: true
+        }
+        Property {
+            name: "x"
+            type: "int"
+            bindable: "bindableX"
+            read: "default"
+            notify: "xChanged"
+            index: 3
+            lineNumber: 23
+            isReadonly: true
+        }
+        Property {
+            name: "y"
+            type: "int"
+            bindable: "bindableY"
+            read: "default"
+            notify: "yChanged"
+            index: 4
+            lineNumber: 24
+            isReadonly: true
+        }
+        Property {
+            name: "width"
+            type: "int"
+            bindable: "bindableWidth"
+            read: "default"
+            notify: "widthChanged"
+            index: 5
+            lineNumber: 25
+            isReadonly: true
+        }
+        Property {
+            name: "height"
+            type: "int"
+            bindable: "bindableHeight"
+            read: "default"
+            notify: "heightChanged"
+            index: 6
+            lineNumber: 26
+            isReadonly: true
+        }
+        Property {
+            name: "scale"
+            type: "double"
+            bindable: "bindableScale"
+            read: "default"
+            notify: "scaleChanged"
+            index: 7
+            lineNumber: 27
+            isReadonly: true
+        }
+        Property {
+            name: "lastIpcObject"
+            type: "QVariantMap"
+            read: "lastIpcObject"
+            notify: "lastIpcObjectChanged"
+            index: 8
+            lineNumber: 33
+            isReadonly: true
+        }
+        Property {
+            name: "activeWorkspace"
+            type: "qs::hyprland::ipc::HyprlandWorkspace"
+            isPointer: true
+            bindable: "bindableActiveWorkspace"
+            read: "default"
+            notify: "activeWorkspaceChanged"
+            index: 9
+            lineNumber: 35
+            isReadonly: true
+        }
+        Property {
+            name: "focused"
+            type: "bool"
+            bindable: "bindableFocused"
+            read: "default"
+            notify: "focusedChanged"
+            index: 10
+            lineNumber: 37
+            isReadonly: true
+        }
+        Signal { name: "idChanged"; lineNumber: 66 }
+        Signal { name: "nameChanged"; lineNumber: 67 }
+        Signal { name: "descriptionChanged"; lineNumber: 68 }
+        Signal { name: "xChanged"; lineNumber: 69 }
+        Signal { name: "yChanged"; lineNumber: 70 }
+        Signal { name: "widthChanged"; lineNumber: 71 }
+        Signal { name: "heightChanged"; lineNumber: 72 }
+        Signal { name: "scaleChanged"; lineNumber: 73 }
+        Signal { name: "lastIpcObjectChanged"; lineNumber: 74 }
+        Signal { name: "activeWorkspaceChanged"; lineNumber: 75 }
+        Signal { name: "focusedChanged"; lineNumber: 76 }
+        Method { name: "onActiveWorkspaceDestroyed"; lineNumber: 79 }
+    }
+    Component {
+        file: "hyprland_toplevel.hpp"
+        lineNumber: 20
+        name: "qs::hyprland::ipc::HyprlandToplevel"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Hyprland._Ipc/HyprlandToplevel 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        attachedType: "qs::hyprland::ipc::HyprlandToplevel"
+        Property {
+            name: "address"
+            type: "QString"
+            read: "addressStr"
+            notify: "addressChanged"
+            index: 0
+            lineNumber: 28
+            isReadonly: true
+        }
+        Property {
+            name: "handle"
+            type: "HyprlandToplevel"
+            isPointer: true
+            read: "hyprlandHandle"
+            notify: "hyprlandHandleChanged"
+            index: 1
+            lineNumber: 31
+            isReadonly: true
+        }
+        Property {
+            name: "wayland"
+            type: "qs::wayland::toplevel::Toplevel"
+            isPointer: true
+            read: "waylandHandle"
+            notify: "waylandHandleChanged"
+            index: 2
+            lineNumber: 33
+            isReadonly: true
+        }
+        Property {
+            name: "title"
+            type: "QString"
+            bindable: "bindableTitle"
+            read: "default"
+            notify: "titleChanged"
+            index: 3
+            lineNumber: 35
+            isReadonly: true
+        }
+        Property {
+            name: "activated"
+            type: "bool"
+            bindable: "bindableActivated"
+            read: "default"
+            notify: "activatedChanged"
+            index: 4
+            lineNumber: 37
+            isReadonly: true
+        }
+        Property {
+            name: "urgent"
+            type: "bool"
+            bindable: "bindableUrgent"
+            read: "default"
+            notify: "urgentChanged"
+            index: 5
+            lineNumber: 39
+            isReadonly: true
+        }
+        Property {
+            name: "lastIpcObject"
+            type: "QVariantMap"
+            bindable: "bindableLastIpcObject"
+            read: "default"
+            notify: "lastIpcObjectChanged"
+            index: 6
+            lineNumber: 45
+            isReadonly: true
+        }
+        Property {
+            name: "workspace"
+            type: "qs::hyprland::ipc::HyprlandWorkspace"
+            isPointer: true
+            bindable: "bindableWorkspace"
+            read: "default"
+            notify: "workspaceChanged"
+            index: 7
+            lineNumber: 47
+            isReadonly: true
+        }
+        Property {
+            name: "monitor"
+            type: "qs::hyprland::ipc::HyprlandMonitor"
+            isPointer: true
+            bindable: "bindableMonitor"
+            read: "default"
+            notify: "monitorChanged"
+            index: 8
+            lineNumber: 49
+            isReadonly: true
+        }
+        Signal { name: "addressChanged"; lineNumber: 90 }
+        Signal { name: "waylandHandleChanged"; lineNumber: 91 }
+        Signal { name: "hyprlandHandleChanged"; lineNumber: 92 }
+        Signal { name: "titleChanged"; lineNumber: 94 }
+        Signal { name: "activatedChanged"; lineNumber: 95 }
+        Signal { name: "urgentChanged"; lineNumber: 96 }
+        Signal { name: "workspaceChanged"; lineNumber: 97 }
+        Signal { name: "monitorChanged"; lineNumber: 98 }
+        Signal { name: "lastIpcObjectChanged"; lineNumber: 99 }
+        Method { name: "onActivatedChanged"; lineNumber: 102 }
+    }
+    Component {
+        file: "workspace.hpp"
+        lineNumber: 19
+        name: "qs::hyprland::ipc::HyprlandWorkspace"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Hyprland._Ipc/HyprlandWorkspace 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "address"
+            type: "QString"
+            bindable: "bindableAddress"
+            read: "default"
+            notify: "addressChanged"
+            index: 0
+            lineNumber: 25
+            isReadonly: true
+        }
+        Property {
+            name: "id"
+            type: "int"
+            bindable: "bindableId"
+            read: "default"
+            notify: "idChanged"
+            index: 1
+            lineNumber: 29
+            isReadonly: true
+        }
+        Property {
+            name: "name"
+            type: "QString"
+            bindable: "bindableName"
+            read: "default"
+            notify: "nameChanged"
+            index: 2
+            lineNumber: 30
+            isReadonly: true
+        }
+        Property {
+            name: "active"
+            type: "bool"
+            bindable: "bindableActive"
+            read: "default"
+            notify: "activeChanged"
+            index: 3
+            lineNumber: 32
+            isReadonly: true
+        }
+        Property {
+            name: "focused"
+            type: "bool"
+            bindable: "bindableFocused"
+            read: "default"
+            notify: "focusedChanged"
+            index: 4
+            lineNumber: 35
+            isReadonly: true
+        }
+        Property {
+            name: "urgent"
+            type: "bool"
+            bindable: "bindableUrgent"
+            read: "default"
+            notify: "urgentChanged"
+            index: 5
+            lineNumber: 38
+            isReadonly: true
+        }
+        Property {
+            name: "hasFullscreen"
+            type: "bool"
+            bindable: "bindableHasFullscreen"
+            read: "default"
+            notify: "hasFullscreenChanged"
+            index: 6
+            lineNumber: 40
+            isReadonly: true
+        }
+        Property {
+            name: "lastIpcObject"
+            type: "QVariantMap"
+            read: "lastIpcObject"
+            notify: "lastIpcObjectChanged"
+            index: 7
+            lineNumber: 46
+            isReadonly: true
+        }
+        Property {
+            name: "monitor"
+            type: "qs::hyprland::ipc::HyprlandMonitor"
+            isPointer: true
+            bindable: "bindableMonitor"
+            read: "default"
+            notify: "monitorChanged"
+            index: 8
+            lineNumber: 47
+            isReadonly: true
+        }
+        Property {
+            name: "toplevels"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "toplevels"
+            index: 9
+            lineNumber: 50
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Signal { name: "addressChanged"; lineNumber: 87 }
+        Signal { name: "idChanged"; lineNumber: 88 }
+        Signal { name: "typeChanged"; lineNumber: 89 }
+        Signal { name: "nameChanged"; lineNumber: 90 }
+        Signal { name: "activeChanged"; lineNumber: 91 }
+        Signal { name: "focusedChanged"; lineNumber: 92 }
+        Signal { name: "urgentChanged"; lineNumber: 93 }
+        Signal { name: "hasFullscreenChanged"; lineNumber: 94 }
+        Signal { name: "lastIpcObjectChanged"; lineNumber: 95 }
+        Signal { name: "monitorChanged"; lineNumber: 96 }
+        Method { name: "onMonitorDestroyed"; lineNumber: 99 }
+        Method { name: "updateUrgent"; lineNumber: 100 }
+        Method { name: "activate"; lineNumber: 67 }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Hyprland._SurfaceExtensions
+linktarget quickshell-hyprland-surface-extensionsplugin
+optional plugin quickshell-hyprland-surface-extensionsplugin
+classname Quickshell_Hyprland__SurfaceExtensionsPlugin
+typeinfo quickshell-hyprland-surface-extensions.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Hyprland/_SurfaceExtensions/
+depends QtQuick
+
@@ -0,0 +1,50 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "qml.hpp"
+        lineNumber: 33
+        name: "qs::hyprland::surface::HyprlandWindow"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Hyprland._SurfaceExtensions/HyprlandWindow 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        attachedType: "qs::hyprland::surface::HyprlandWindow"
+        Property {
+            name: "opacity"
+            type: "double"
+            read: "opacity"
+            write: "setOpacity"
+            notify: "opacityChanged"
+            index: 0
+            lineNumber: 40
+        }
+        Property {
+            name: "visibleMask"
+            type: "PendingRegion"
+            isPointer: true
+            read: "visibleMask"
+            write: "setVisibleMask"
+            notify: "visibleMaskChanged"
+            index: 1
+            lineNumber: 45
+        }
+        Signal { name: "opacityChanged"; lineNumber: 65 }
+        Signal { name: "visibleMaskChanged"; lineNumber: 66 }
+        Method { name: "onWindowConnected"; lineNumber: 69 }
+        Method { name: "onWindowVisibleChanged"; lineNumber: 70 }
+        Method { name: "onWaylandWindowDestroyed"; lineNumber: 71 }
+        Method { name: "onWaylandSurfaceCreated"; lineNumber: 72 }
+        Method { name: "onWaylandSurfaceDestroyed"; lineNumber: 73 }
+        Method { name: "onProxyWindowDestroyed"; lineNumber: 74 }
+        Method { name: "onVisibleMaskDestroyed"; lineNumber: 75 }
+        Method { name: "onWindowPolished"; lineNumber: 76 }
+        Method { name: "updateVisibleMask"; lineNumber: 77 }
+    }
+}
@@ -0,0 +1,11 @@
+module Quickshell.Hyprland
+linktarget quickshell-hyprlandplugin
+optional plugin quickshell-hyprlandplugin
+classname Quickshell_HyprlandPlugin
+typeinfo quickshell-hyprland.qmltypes
+import Quickshell.Hyprland._Ipc
+import Quickshell.Hyprland._FocusGrab
+import Quickshell.Hyprland._GlobalShortcuts
+import Quickshell.Hyprland._SurfaceExtensions
+prefer :/qt/qml/Quickshell/Hyprland/
+
@@ -0,0 +1,8 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {}
@@ -0,0 +1,10 @@
+module Quickshell.I3._Ipc
+linktarget quickshell-i3-ipcplugin
+optional plugin quickshell-i3-ipcplugin
+classname Quickshell_I3__IpcPlugin
+typeinfo quickshell-i3-ipc.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/I3/_Ipc/
+depends Quickshell
+depends QtQuick
+
@@ -0,0 +1,413 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "connection.hpp"
+        lineNumber: 41
+        name: "qs::i3::ipc::I3IpcEvent"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.I3._Ipc/I3Event 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "type"
+            type: "QString"
+            read: "type"
+            index: 0
+            lineNumber: 44
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "data"
+            type: "QString"
+            read: "data"
+            index: 1
+            lineNumber: 45
+            isReadonly: true
+            isPropertyConstant: true
+        }
+    }
+    Component {
+        file: "listener.hpp"
+        lineNumber: 36
+        name: "qs::i3::ipc::I3IpcListener"
+        accessSemantics: "reference"
+        prototype: "PostReloadHook"
+        exports: ["Quickshell.I3._Ipc/I3IpcListener 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "subscriptions"
+            type: "QString"
+            isList: true
+            read: "subscriptions"
+            write: "setSubscriptions"
+            notify: "subscriptionsChanged"
+            index: 0
+            lineNumber: 40
+        }
+        Signal {
+            name: "ipcEvent"
+            lineNumber: 55
+            Parameter { name: "event"; type: "I3IpcEvent"; isPointer: true }
+        }
+        Signal { name: "subscriptionsChanged"; lineNumber: 56 }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 15
+        name: "qs::i3::ipc::I3IpcQml"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.I3._Ipc/I3 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "socketPath"
+            type: "QString"
+            read: "socketPath"
+            index: 0
+            lineNumber: 19
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "focusedWorkspace"
+            type: "qs::i3::ipc::I3Workspace"
+            isPointer: true
+            bindable: "bindableFocusedWorkspace"
+            read: "default"
+            notify: "focusedWorkspaceChanged"
+            index: 1
+            lineNumber: 21
+            isReadonly: true
+        }
+        Property {
+            name: "focusedMonitor"
+            type: "qs::i3::ipc::I3Monitor"
+            isPointer: true
+            bindable: "bindableFocusedMonitor"
+            read: "default"
+            notify: "focusedMonitorChanged"
+            index: 2
+            lineNumber: 22
+            isReadonly: true
+        }
+        Property {
+            name: "monitors"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "monitors"
+            index: 3
+            lineNumber: 25
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "workspaces"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "workspaces"
+            index: 4
+            lineNumber: 28
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Signal {
+            name: "rawEvent"
+            lineNumber: 70
+            Parameter { name: "event"; type: "I3IpcEvent"; isPointer: true }
+        }
+        Signal { name: "connected"; lineNumber: 71 }
+        Signal { name: "focusedWorkspaceChanged"; lineNumber: 72 }
+        Signal { name: "focusedMonitorChanged"; lineNumber: 73 }
+        Method {
+            name: "dispatch"
+            lineNumber: 37
+            Parameter { name: "request"; type: "QString" }
+        }
+        Method { name: "refreshMonitors"; lineNumber: 40 }
+        Method { name: "refreshWorkspaces"; lineNumber: 43 }
+        Method {
+            name: "findWorkspaceByName"
+            type: "I3Workspace"
+            isPointer: true
+            lineNumber: 46
+            Parameter { name: "name"; type: "QString" }
+        }
+        Method {
+            name: "findMonitorByName"
+            type: "I3Monitor"
+            isPointer: true
+            lineNumber: 49
+            Parameter { name: "name"; type: "QString" }
+        }
+        Method {
+            name: "monitorFor"
+            type: "I3Monitor"
+            isPointer: true
+            lineNumber: 52
+            Parameter { name: "screen"; type: "QuickshellScreenInfo"; isPointer: true }
+        }
+    }
+    Component {
+        file: "monitor.hpp"
+        lineNumber: 12
+        name: "qs::i3::ipc::I3Monitor"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.I3._Ipc/I3Monitor 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "id"
+            type: "int"
+            bindable: "bindableId"
+            read: "default"
+            notify: "idChanged"
+            index: 0
+            lineNumber: 16
+            isReadonly: true
+        }
+        Property {
+            name: "name"
+            type: "QString"
+            bindable: "bindableName"
+            read: "default"
+            notify: "nameChanged"
+            index: 1
+            lineNumber: 18
+            isReadonly: true
+        }
+        Property {
+            name: "power"
+            type: "bool"
+            bindable: "bindablePower"
+            read: "default"
+            notify: "powerChanged"
+            index: 2
+            lineNumber: 20
+            isReadonly: true
+        }
+        Property {
+            name: "activeWorkspace"
+            type: "qs::i3::ipc::I3Workspace"
+            isPointer: true
+            bindable: "bindableActiveWorkspace"
+            read: "default"
+            notify: "activeWorkspaceChanged"
+            index: 3
+            lineNumber: 22
+            isReadonly: true
+        }
+        Property {
+            name: "focusedWorkspace"
+            type: "qs::i3::ipc::I3Workspace"
+            isPointer: true
+            bindable: "bindableActiveWorkspace"
+            read: "default"
+            notify: "activeWorkspaceChanged"
+            index: 4
+            lineNumber: 24
+            isReadonly: true
+        }
+        Property {
+            name: "x"
+            type: "int"
+            bindable: "bindableX"
+            read: "default"
+            notify: "xChanged"
+            index: 5
+            lineNumber: 26
+            isReadonly: true
+        }
+        Property {
+            name: "y"
+            type: "int"
+            bindable: "bindableY"
+            read: "default"
+            notify: "yChanged"
+            index: 6
+            lineNumber: 28
+            isReadonly: true
+        }
+        Property {
+            name: "width"
+            type: "int"
+            bindable: "bindableWidth"
+            read: "default"
+            notify: "widthChanged"
+            index: 7
+            lineNumber: 30
+            isReadonly: true
+        }
+        Property {
+            name: "height"
+            type: "int"
+            bindable: "bindableHeight"
+            read: "default"
+            notify: "heightChanged"
+            index: 8
+            lineNumber: 32
+            isReadonly: true
+        }
+        Property {
+            name: "scale"
+            type: "double"
+            bindable: "bindableScale"
+            read: "default"
+            notify: "scaleChanged"
+            index: 9
+            lineNumber: 34
+            isReadonly: true
+        }
+        Property {
+            name: "focused"
+            type: "bool"
+            bindable: "bindableFocused"
+            read: "default"
+            notify: "focusedChanged"
+            index: 10
+            lineNumber: 36
+            isReadonly: true
+        }
+        Property {
+            name: "lastIpcObject"
+            type: "QVariantMap"
+            read: "lastIpcObject"
+            notify: "lastIpcObjectChanged"
+            index: 11
+            lineNumber: 40
+            isReadonly: true
+        }
+        Signal { name: "idChanged"; lineNumber: 68 }
+        Signal { name: "nameChanged"; lineNumber: 69 }
+        Signal { name: "powerChanged"; lineNumber: 70 }
+        Signal { name: "activeWorkspaceChanged"; lineNumber: 71 }
+        Signal { name: "xChanged"; lineNumber: 72 }
+        Signal { name: "yChanged"; lineNumber: 73 }
+        Signal { name: "widthChanged"; lineNumber: 74 }
+        Signal { name: "heightChanged"; lineNumber: 75 }
+        Signal { name: "scaleChanged"; lineNumber: 76 }
+        Signal { name: "lastIpcObjectChanged"; lineNumber: 77 }
+        Signal { name: "focusedChanged"; lineNumber: 78 }
+        Method { name: "onActiveWorkspaceDestroyed"; lineNumber: 81 }
+    }
+    Component {
+        file: "workspace.hpp"
+        lineNumber: 15
+        name: "qs::i3::ipc::I3Workspace"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.I3._Ipc/I3Workspace 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "id"
+            type: "int"
+            bindable: "bindableId"
+            read: "default"
+            notify: "idChanged"
+            index: 0
+            lineNumber: 19
+            isReadonly: true
+        }
+        Property {
+            name: "name"
+            type: "QString"
+            bindable: "bindableName"
+            read: "default"
+            notify: "nameChanged"
+            index: 1
+            lineNumber: 21
+            isReadonly: true
+        }
+        Property {
+            name: "number"
+            type: "int"
+            bindable: "bindableNumber"
+            read: "default"
+            notify: "numberChanged"
+            index: 2
+            lineNumber: 23
+            isReadonly: true
+        }
+        Property {
+            name: "num"
+            type: "int"
+            bindable: "bindableNumber"
+            read: "default"
+            notify: "numberChanged"
+            index: 3
+            lineNumber: 25
+            isReadonly: true
+        }
+        Property {
+            name: "urgent"
+            type: "bool"
+            bindable: "bindableUrgent"
+            read: "default"
+            notify: "urgentChanged"
+            index: 4
+            lineNumber: 27
+            isReadonly: true
+        }
+        Property {
+            name: "active"
+            type: "bool"
+            bindable: "bindableActive"
+            read: "default"
+            notify: "activeChanged"
+            index: 5
+            lineNumber: 29
+            isReadonly: true
+        }
+        Property {
+            name: "focused"
+            type: "bool"
+            bindable: "bindableFocused"
+            read: "default"
+            notify: "focusedChanged"
+            index: 6
+            lineNumber: 32
+            isReadonly: true
+        }
+        Property {
+            name: "monitor"
+            type: "qs::i3::ipc::I3Monitor"
+            isPointer: true
+            bindable: "bindableMonitor"
+            read: "default"
+            notify: "monitorChanged"
+            index: 7
+            lineNumber: 34
+            isReadonly: true
+        }
+        Property {
+            name: "lastIpcObject"
+            type: "QVariantMap"
+            read: "lastIpcObject"
+            notify: "lastIpcObjectChanged"
+            index: 8
+            lineNumber: 38
+            isReadonly: true
+        }
+        Signal { name: "idChanged"; lineNumber: 68 }
+        Signal { name: "nameChanged"; lineNumber: 69 }
+        Signal { name: "urgentChanged"; lineNumber: 70 }
+        Signal { name: "activeChanged"; lineNumber: 71 }
+        Signal { name: "focusedChanged"; lineNumber: 72 }
+        Signal { name: "numberChanged"; lineNumber: 73 }
+        Signal { name: "monitorChanged"; lineNumber: 74 }
+        Signal { name: "lastIpcObjectChanged"; lineNumber: 75 }
+        Method { name: "onMonitorDestroyed"; lineNumber: 78 }
+        Method { name: "activate"; lineNumber: 52 }
+    }
+}
@@ -0,0 +1,8 @@
+module Quickshell.I3
+linktarget quickshell-i3plugin
+optional plugin quickshell-i3plugin
+classname Quickshell_I3Plugin
+typeinfo quickshell-i3.qmltypes
+import Quickshell.I3._Ipc
+prefer :/qt/qml/Quickshell/I3/
+
@@ -0,0 +1,8 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {}
@@ -0,0 +1,53 @@
+import Quickshell.Io
+
+FileViewInternal {
+	property bool preload: this.__preload;
+	property bool blockLoading: this.__blockLoading;
+	property bool blockAllReads: this.__blockAllReads;
+	property bool printErrors: this.__printErrors;
+	property string path: this.__path;
+
+	onPreloadChanged: this.__preload = preload;
+	onBlockLoadingChanged: this.__blockLoading = this.blockLoading;
+	onBlockAllReadsChanged: this.__blockAllReads = this.blockAllReads;
+	onPrintErrorsChanged: this.__printErrors = this.printErrors;
+
+	// Unfortunately path can't be kept as an empty string until the file loads
+	// without using QQmlPropertyValueInterceptor which is private. If we lean fully
+	// into using private code in the future, there will be no reason not to do it here.
+
+	onPathChanged: {
+		if (!this.preload) this.__preload = false;
+		this.__printErrors = this.printErrors;
+		this.__path = this.path;
+		if (this.preload) this.__preload = true;
+	}
+
+	// The C++ side can't force bindings to be resolved in a specific order so
+	// its done here. Functions are used to avoid the eager loading aspect of properties.
+
+	// Preload is set as it is below to avoid starting an async read from a preload
+	// if the user wants an initial blocking read.
+
+	function text(): string {
+		if (!this.preload) this.__preload = false;
+		this.__blockLoading = this.blockLoading;
+		this.__blockAllReads = this.blockAllReads;
+		this.__printErrors = this.printErrors;
+		this.__path = this.path;
+		const text = this.__text;
+		if (this.preload) this.__preload = true;
+		return text;
+	}
+
+	function data(): var {
+		if (!this.preload) this.__preload = false;
+		this.__blockLoading = this.blockLoading;
+		this.__blockAllReads = this.blockAllReads;
+		this.__printErrors = this.printErrors;
+		this.__path = this.path;
+		const data = this.__data;
+		if (this.preload) this.__preload = true;
+		return data;
+	}
+}
@@ -0,0 +1,11 @@
+module Quickshell.Io
+linktarget quickshell-ioplugin
+optional plugin quickshell-ioplugin
+classname Quickshell_IoPlugin
+typeinfo quickshell-io.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Io/
+FileView 0.0 FileView.qml
+depends Quickshell
+depends QtQuick
+
@@ -0,0 +1,642 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "datastream.hpp"
+        lineNumber: 15
+        name: "DataStream"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Io/DataStream 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "parser"
+            type: "DataStreamParser"
+            isPointer: true
+            read: "reader"
+            write: "setReader"
+            notify: "readerChanged"
+            index: 0
+            lineNumber: 19
+        }
+        Signal { name: "readerChanged"; lineNumber: 30 }
+        Method { name: "onBytesAvailable"; lineNumber: 33 }
+        Method { name: "onReaderDestroyed"; lineNumber: 39 }
+    }
+    Component {
+        file: "datastream.hpp"
+        lineNumber: 48
+        name: "DataStreamParser"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Io/DataStreamParser 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Signal {
+            name: "read"
+            lineNumber: 62
+            Parameter { name: "data"; type: "QString" }
+        }
+    }
+    Component {
+        file: "process.hpp"
+        lineNumber: 34
+        name: "Process"
+        accessSemantics: "reference"
+        prototype: "PostReloadHook"
+        exports: ["Quickshell.Io/Process 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "running"
+            type: "bool"
+            read: "isRunning"
+            write: "setRunning"
+            notify: "runningChanged"
+            index: 0
+            lineNumber: 56
+        }
+        Property {
+            name: "processId"
+            type: "QVariant"
+            read: "processId"
+            notify: "processIdChanged"
+            index: 1
+            lineNumber: 58
+            isReadonly: true
+        }
+        Property {
+            name: "command"
+            type: "QString"
+            isList: true
+            read: "command"
+            write: "setCommand"
+            notify: "commandChanged"
+            index: 2
+            lineNumber: 76
+        }
+        Property {
+            name: "workingDirectory"
+            type: "QString"
+            read: "workingDirectory"
+            write: "setWorkingDirectory"
+            notify: "workingDirectoryChanged"
+            index: 3
+            lineNumber: 84
+        }
+        Property {
+            name: "environment"
+            type: "QVariantHash"
+            read: "environment"
+            write: "setEnvironment"
+            notify: "environmentChanged"
+            index: 4
+            lineNumber: 105
+        }
+        Property {
+            name: "clearEnvironment"
+            type: "bool"
+            read: "environmentCleared"
+            write: "setEnvironmentCleared"
+            notify: "environmentClearChanged"
+            index: 5
+            lineNumber: 125
+        }
+        Property {
+            name: "stdout"
+            type: "DataStreamParser"
+            isPointer: true
+            read: "stdoutParser"
+            write: "setStdoutParser"
+            notify: "stdoutParserChanged"
+            index: 6
+            lineNumber: 128
+        }
+        Property {
+            name: "stderr"
+            type: "DataStreamParser"
+            isPointer: true
+            read: "stderrParser"
+            write: "setStderrParser"
+            notify: "stderrParserChanged"
+            index: 7
+            lineNumber: 131
+        }
+        Property {
+            name: "stdinEnabled"
+            type: "bool"
+            read: "stdinEnabled"
+            write: "setStdinEnabled"
+            notify: "stdinEnabledChanged"
+            index: 8
+            lineNumber: 134
+        }
+        Signal { name: "started"; lineNumber: 220 }
+        Signal {
+            name: "exited"
+            lineNumber: 221
+            Parameter { name: "exitCode"; type: "int" }
+            Parameter { name: "exitStatus"; type: "QProcess::ExitStatus" }
+        }
+        Signal { name: "runningChanged"; lineNumber: 223 }
+        Signal { name: "processIdChanged"; lineNumber: 224 }
+        Signal { name: "commandChanged"; lineNumber: 225 }
+        Signal { name: "workingDirectoryChanged"; lineNumber: 226 }
+        Signal { name: "environmentChanged"; lineNumber: 227 }
+        Signal { name: "environmentClearChanged"; lineNumber: 228 }
+        Signal { name: "stdoutParserChanged"; lineNumber: 229 }
+        Signal { name: "stderrParserChanged"; lineNumber: 230 }
+        Signal { name: "stdinEnabledChanged"; lineNumber: 231 }
+        Method { name: "onStarted"; lineNumber: 234 }
+        Method {
+            name: "onFinished"
+            lineNumber: 235
+            Parameter { name: "exitCode"; type: "int" }
+            Parameter { name: "exitStatus"; type: "QProcess::ExitStatus" }
+        }
+        Method {
+            name: "onErrorOccurred"
+            lineNumber: 236
+            Parameter { name: "error"; type: "QProcess::ProcessError" }
+        }
+        Method { name: "onStdoutReadyRead"; lineNumber: 237 }
+        Method { name: "onStderrReadyRead"; lineNumber: 238 }
+        Method { name: "onStdoutParserDestroyed"; lineNumber: 239 }
+        Method { name: "onStderrParserDestroyed"; lineNumber: 240 }
+        Method { name: "onGlobalWorkingDirectoryChanged"; lineNumber: 241 }
+        Method {
+            name: "exec"
+            lineNumber: 146
+            Parameter { name: "command"; type: "QString"; isList: true }
+        }
+        Method {
+            name: "exec"
+            lineNumber: 177
+            Parameter { name: "context"; type: "qs::io::process::ProcessContext" }
+        }
+        Method {
+            name: "signal"
+            lineNumber: 180
+            Parameter { name: "signal"; type: "int" }
+        }
+        Method {
+            name: "write"
+            lineNumber: 183
+            Parameter { name: "data"; type: "QString" }
+        }
+        Method { name: "startDetached"; lineNumber: 191 }
+    }
+    Component {
+        file: "socket.hpp"
+        lineNumber: 20
+        name: "Socket"
+        accessSemantics: "reference"
+        prototype: "DataStream"
+        exports: ["Quickshell.Io/Socket 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "connected"
+            type: "bool"
+            read: "isConnected"
+            write: "setConnected"
+            notify: "connectionStateChanged"
+            index: 0
+            lineNumber: 27
+        }
+        Property {
+            name: "path"
+            type: "QString"
+            read: "path"
+            write: "setPath"
+            notify: "pathChanged"
+            index: 1
+            lineNumber: 31
+        }
+        Signal {
+            name: "error"
+            lineNumber: 56
+            Parameter { name: "error"; type: "QLocalSocket::LocalSocketError" }
+        }
+        Signal { name: "connectionStateChanged"; lineNumber: 58 }
+        Signal { name: "pathChanged"; lineNumber: 59 }
+        Method { name: "onSocketConnected"; lineNumber: 65 }
+        Method { name: "onSocketDisconnected"; lineNumber: 66 }
+        Method {
+            name: "onSocketError"
+            lineNumber: 67
+            Parameter { name: "error"; type: "QLocalSocket::LocalSocketError" }
+        }
+        Method {
+            name: "write"
+            lineNumber: 40
+            Parameter { name: "data"; type: "QString" }
+        }
+        Method { name: "flush"; lineNumber: 43 }
+    }
+    Component {
+        file: "socket.hpp"
+        lineNumber: 95
+        name: "SocketServer"
+        accessSemantics: "reference"
+        prototype: "Reloadable"
+        exports: ["Quickshell.Io/SocketServer 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "active"
+            type: "bool"
+            read: "isActive"
+            write: "setActive"
+            notify: "activeStatusChanged"
+            index: 0
+            lineNumber: 103
+        }
+        Property {
+            name: "path"
+            type: "QString"
+            read: "path"
+            write: "setPath"
+            notify: "pathChanged"
+            index: 1
+            lineNumber: 107
+        }
+        Property {
+            name: "handler"
+            type: "QQmlComponent"
+            isPointer: true
+            read: "handler"
+            write: "setHandler"
+            notify: "handlerChanged"
+            index: 2
+            lineNumber: 114
+        }
+        Signal { name: "activeStatusChanged"; lineNumber: 134 }
+        Signal { name: "pathChanged"; lineNumber: 135 }
+        Signal { name: "handlerChanged"; lineNumber: 136 }
+        Method { name: "onNewConnection"; lineNumber: 139 }
+    }
+    Component {
+        file: "datastream.hpp"
+        lineNumber: 67
+        name: "SplitParser"
+        accessSemantics: "reference"
+        prototype: "DataStreamParser"
+        exports: ["Quickshell.Io/SplitParser 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "splitMarker"
+            type: "QString"
+            read: "splitMarker"
+            write: "setSplitMarker"
+            notify: "splitMarkerChanged"
+            index: 0
+            lineNumber: 73
+        }
+        Signal { name: "splitMarkerChanged"; lineNumber: 86 }
+    }
+    Component {
+        file: "datastream.hpp"
+        lineNumber: 95
+        name: "StdioCollector"
+        accessSemantics: "reference"
+        prototype: "DataStreamParser"
+        exports: ["Quickshell.Io/StdioCollector 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "text"
+            type: "QString"
+            read: "text"
+            notify: "dataChanged"
+            index: 0
+            lineNumber: 100
+            isReadonly: true
+        }
+        Property {
+            name: "data"
+            type: "QByteArray"
+            read: "data"
+            notify: "dataChanged"
+            index: 1
+            lineNumber: 105
+            isReadonly: true
+        }
+        Property {
+            name: "waitForEnd"
+            type: "bool"
+            read: "waitForEnd"
+            write: "setWaitForEnd"
+            notify: "waitForEndChanged"
+            index: 2
+            lineNumber: 107
+        }
+        Signal { name: "waitForEndChanged"; lineNumber: 122 }
+        Signal { name: "dataChanged"; lineNumber: 123 }
+        Signal { name: "streamFinished"; lineNumber: 124 }
+    }
+    Component {
+        file: "fileview.hpp"
+        lineNumber: 164
+        name: "qs::io::FileView"
+        accessSemantics: "reference"
+        defaultProperty: "adapter"
+        prototype: "QObject"
+        exports: ["Quickshell.Io/FileViewInternal 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "blockWrites"
+            type: "bool"
+            bindable: "bindableBlockWrites"
+            read: "default"
+            write: "default"
+            notify: "blockWritesChanged"
+            index: 0
+            lineNumber: 201
+        }
+        Property {
+            name: "atomicWrites"
+            type: "bool"
+            bindable: "bindableAtomicWrites"
+            read: "default"
+            write: "default"
+            notify: "atomicWritesChanged"
+            index: 1
+            lineNumber: 207
+        }
+        Property {
+            name: "watchChanges"
+            type: "bool"
+            bindable: "bindableWatchChanges"
+            read: "default"
+            write: "default"
+            notify: "watchChangesChanged"
+            index: 2
+            lineNumber: 222
+        }
+        Property {
+            name: "adapter"
+            type: "FileViewAdapter"
+            isPointer: true
+            read: "adapter"
+            write: "setAdapter"
+            notify: "adapterChanged"
+            index: 3
+            lineNumber: 230
+        }
+        Property {
+            name: "__path"
+            type: "QString"
+            read: "path"
+            write: "setPath"
+            notify: "pathChanged"
+            index: 4
+            lineNumber: 232
+        }
+        Property {
+            name: "__text"
+            type: "QString"
+            read: "text"
+            notify: "internalTextChanged"
+            index: 5
+            lineNumber: 233
+            isReadonly: true
+        }
+        Property {
+            name: "__data"
+            type: "QByteArray"
+            read: "data"
+            notify: "internalDataChanged"
+            index: 6
+            lineNumber: 234
+            isReadonly: true
+        }
+        Property {
+            name: "__preload"
+            type: "bool"
+            read: "shouldPreload"
+            write: "setPreload"
+            notify: "preloadChanged"
+            index: 7
+            lineNumber: 235
+        }
+        Property {
+            name: "loaded"
+            type: "bool"
+            read: "isLoadedOrAsync"
+            notify: "loadedOrAsyncChanged"
+            index: 8
+            lineNumber: 241
+            isReadonly: true
+        }
+        Property {
+            name: "__blockLoading"
+            type: "bool"
+            read: "blockLoading"
+            write: "setBlockLoading"
+            notify: "blockLoadingChanged"
+            index: 9
+            lineNumber: 242
+        }
+        Property {
+            name: "__blockAllReads"
+            type: "bool"
+            read: "blockAllReads"
+            write: "setBlockAllReads"
+            notify: "blockAllReadsChanged"
+            index: 10
+            lineNumber: 243
+        }
+        Property {
+            name: "__printErrors"
+            type: "bool"
+            bindable: "bindablePrintErrors"
+            read: "default"
+            write: "default"
+            notify: "printErrorsChanged"
+            index: 11
+            lineNumber: 244
+        }
+        Signal { name: "loaded"; lineNumber: 338 }
+        Signal {
+            name: "loadFailed"
+            lineNumber: 340
+            Parameter { name: "error"; type: "qs::io::FileViewError::Enum" }
+        }
+        Signal { name: "saved"; lineNumber: 342 }
+        Signal {
+            name: "saveFailed"
+            lineNumber: 344
+            Parameter { name: "error"; type: "qs::io::FileViewError::Enum" }
+        }
+        Signal { name: "fileChanged"; lineNumber: 346 }
+        Signal { name: "adapterUpdated"; lineNumber: 348 }
+        Signal { name: "pathChanged"; lineNumber: 350 }
+        Signal { name: "internalTextChanged"; lineNumber: 351 }
+        Signal { name: "internalDataChanged"; lineNumber: 352 }
+        Signal { name: "textChanged"; lineNumber: 353 }
+        Signal { name: "dataChanged"; lineNumber: 354 }
+        Signal { name: "preloadChanged"; lineNumber: 355 }
+        Signal { name: "loadedOrAsyncChanged"; lineNumber: 356 }
+        Signal { name: "blockLoadingChanged"; lineNumber: 357 }
+        Signal { name: "blockAllReadsChanged"; lineNumber: 358 }
+        Signal { name: "blockWritesChanged"; lineNumber: 359 }
+        Signal { name: "atomicWritesChanged"; lineNumber: 360 }
+        Signal { name: "printErrorsChanged"; lineNumber: 361 }
+        Signal { name: "watchChangesChanged"; lineNumber: 362 }
+        Signal { name: "adapterChanged"; lineNumber: 363 }
+        Method { name: "operationFinished"; lineNumber: 366 }
+        Method { name: "onAdapterDestroyed"; lineNumber: 367 }
+        Method { name: "waitForJob"; type: "bool"; lineNumber: 293 }
+        Method { name: "reload"; lineNumber: 298 }
+        Method { name: "writeAdapter"; lineNumber: 300 }
+        Method {
+            name: "setData"
+            lineNumber: 316
+            Parameter { name: "data"; type: "QByteArray" }
+        }
+        Method {
+            name: "setText"
+            lineNumber: 324
+            Parameter { name: "text"; type: "QString" }
+        }
+    }
+    Component {
+        file: "fileview.hpp"
+        lineNumber: 436
+        name: "qs::io::FileViewAdapter"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Io/FileViewAdapter 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Signal { name: "adapterUpdated"; lineNumber: 448 }
+        Method { name: "onDataChanged"; lineNumber: 451 }
+    }
+    Component {
+        file: "fileview.hpp"
+        lineNumber: 25
+        name: "qs::io::FileViewError"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Io/FileViewError 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 31
+            values: [
+                "Success",
+                "Unknown",
+                "FileNotFound",
+                "PermissionDenied",
+                "NotAFile"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 46
+            Parameter { name: "value"; type: "qs::io::FileViewError::Enum" }
+        }
+    }
+    Component {
+        file: "jsonadapter.hpp"
+        lineNumber: 89
+        name: "qs::io::JsonAdapter"
+        accessSemantics: "reference"
+        prototype: "qs::io::FileViewAdapter"
+        interfaces: ["QQmlParserStatus"]
+        exports: ["Quickshell.Io/JsonAdapter 0.0"]
+        exportMetaObjectRevisions: [0]
+        Method { name: "onPropertyChanged"; lineNumber: 104 }
+    }
+    Component {
+        file: "jsonadapter.hpp"
+        lineNumber: 19
+        name: "qs::io::JsonObject"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Io/JsonObject 0.0"]
+        exportMetaObjectRevisions: [0]
+    }
+    Component {
+        file: "ipchandler.hpp"
+        lineNumber: 222
+        name: "qs::io::ipc::IpcHandler"
+        accessSemantics: "reference"
+        prototype: "PostReloadHook"
+        exports: ["Quickshell.Io/IpcHandler 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "enabled"
+            type: "bool"
+            read: "enabled"
+            write: "setEnabled"
+            notify: "enabledChanged"
+            index: 0
+            lineNumber: 225
+        }
+        Property {
+            name: "target"
+            type: "QString"
+            read: "target"
+            write: "setTarget"
+            notify: "targetChanged"
+            index: 1
+            lineNumber: 228
+        }
+        Signal { name: "enabledChanged"; lineNumber: 251 }
+        Signal { name: "targetChanged"; lineNumber: 252 }
+        Method {
+            name: "onSignalTriggered"
+            isMethodConstant: true
+            lineNumber: 255
+            Parameter { name: "signal"; type: "QString" }
+            Parameter { name: "value"; type: "QString" }
+        }
+    }
+    Component {
+        file: "processcore.hpp"
+        lineNumber: 14
+        name: "qs::io::process::ProcessContext"
+        accessSemantics: "value"
+        exports: ["Quickshell.Io/processContext 0.0"]
+        isStructured: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "command"
+            type: "QString"
+            isList: true
+            write: "setCommand"
+            index: 0
+            lineNumber: 15
+        }
+        Property {
+            name: "environment"
+            type: "QVariantHash"
+            write: "setEnvironment"
+            index: 1
+            lineNumber: 16
+        }
+        Property {
+            name: "clearEnvironment"
+            type: "bool"
+            write: "setClearEnvironment"
+            index: 2
+            lineNumber: 17
+        }
+        Property {
+            name: "workingDirectory"
+            type: "QString"
+            write: "setWorkingDirectory"
+            index: 3
+            lineNumber: 18
+        }
+        Property { name: "unbindStdout"; type: "bool"; write: "setUnbindStdout"; index: 4; lineNumber: 19 }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Networking
+linktarget quickshell-networkplugin
+optional plugin quickshell-networkplugin
+classname Quickshell_NetworkingPlugin
+typeinfo quickshell-network.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Networking/
+depends Quickshell
+
@@ -0,0 +1,614 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "enums.hpp"
+        lineNumber: 67
+        name: "qs::network::ConnectionFailReason"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/ConnectionFailReason 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 73
+            values: [
+                "Unknown",
+                "NoSecrets",
+                "WifiClientDisconnected",
+                "WifiClientFailed",
+                "WifiAuthTimeout",
+                "WifiNetworkLost"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 88
+            Parameter { name: "reason"; type: "ConnectionFailReason::Enum" }
+        }
+    }
+    Component {
+        file: "enums.hpp"
+        lineNumber: 49
+        name: "qs::network::ConnectionState"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/ConnectionState 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 55
+            values: [
+                "Unknown",
+                "Connecting",
+                "Connected",
+                "Disconnecting",
+                "Disconnected"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 63
+            Parameter { name: "state"; type: "ConnectionState::Enum" }
+        }
+    }
+    Component {
+        file: "enums.hpp"
+        lineNumber: 92
+        name: "qs::network::DeviceType"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/DeviceType 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 98
+            values: ["None", "Wifi", "Wired"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 104
+            Parameter { name: "type"; type: "DeviceType::Enum" }
+        }
+    }
+    Component {
+        file: "network.hpp"
+        lineNumber: 21
+        name: "qs::network::Network"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/Network 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "name"
+            type: "QString"
+            bindable: "bindableName"
+            read: "default"
+            notify: "nameChanged"
+            index: 0
+            lineNumber: 28
+            isReadonly: true
+        }
+        Property {
+            name: "device"
+            type: "NetworkDevice"
+            isPointer: true
+            read: "device"
+            index: 1
+            lineNumber: 30
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "nmSettings"
+            type: "QList<NMSettings*>"
+            bindable: "bindableNmSettings"
+            read: "default"
+            notify: "nmSettingsChanged"
+            index: 2
+            lineNumber: 34
+            isReadonly: true
+        }
+        Property {
+            name: "connected"
+            type: "bool"
+            bindable: "bindableConnected"
+            read: "default"
+            notify: "connectedChanged"
+            index: 3
+            lineNumber: 36
+            isReadonly: true
+        }
+        Property {
+            name: "known"
+            type: "bool"
+            bindable: "bindableKnown"
+            read: "default"
+            notify: "knownChanged"
+            index: 4
+            lineNumber: 38
+            isReadonly: true
+        }
+        Property {
+            name: "state"
+            type: "ConnectionState::Enum"
+            bindable: "bindableState"
+            read: "default"
+            notify: "stateChanged"
+            index: 5
+            lineNumber: 40
+            isReadonly: true
+        }
+        Property {
+            name: "stateChanging"
+            type: "bool"
+            bindable: "bindableStateChanging"
+            read: "default"
+            notify: "stateChangingChanged"
+            index: 6
+            lineNumber: 42
+            isReadonly: true
+        }
+        Signal {
+            name: "connectionFailed"
+            lineNumber: 80
+            Parameter { name: "reason"; type: "ConnectionFailReason::Enum" }
+        }
+        Signal { name: "nameChanged"; lineNumber: 82 }
+        Signal { name: "connectedChanged"; lineNumber: 83 }
+        Signal { name: "knownChanged"; lineNumber: 84 }
+        Signal { name: "stateChanged"; lineNumber: 85 }
+        Signal { name: "stateChangingChanged"; lineNumber: 86 }
+        Signal { name: "nmSettingsChanged"; lineNumber: 87 }
+        Signal { name: "requestConnect"; lineNumber: 88 }
+        Signal {
+            name: "requestConnectWithSettings"
+            lineNumber: 89
+            Parameter { name: "settings"; type: "NMSettings"; isPointer: true }
+        }
+        Signal { name: "requestDisconnect"; lineNumber: 90 }
+        Signal { name: "requestForget"; lineNumber: 91 }
+        Method { name: "connect"; lineNumber: 52 }
+        Method {
+            name: "connectWithSettings"
+            lineNumber: 56
+            Parameter { name: "settings"; type: "NMSettings"; isPointer: true }
+        }
+        Method { name: "disconnect"; lineNumber: 58 }
+        Method { name: "forget"; lineNumber: 60 }
+    }
+    Component {
+        file: "enums.hpp"
+        lineNumber: 34
+        name: "qs::network::NetworkBackendType"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/NetworkBackendType 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 40
+            values: ["None", "NetworkManager"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 45
+            Parameter { name: "type"; type: "NetworkBackendType::Enum" }
+        }
+    }
+    Component {
+        file: "enums.hpp"
+        lineNumber: 10
+        name: "qs::network::NetworkConnectivity"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/NetworkConnectivity 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 16
+            values: ["Unknown", "None", "Portal", "Limited", "Full"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 30
+            Parameter { name: "conn"; type: "NetworkConnectivity::Enum" }
+        }
+    }
+    Component {
+        file: "device.hpp"
+        lineNumber: 18
+        name: "qs::network::NetworkDevice"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/NetworkDevice 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "type"
+            type: "DeviceType::Enum"
+            read: "type"
+            index: 0
+            lineNumber: 28
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "name"
+            type: "QString"
+            bindable: "bindableName"
+            read: "name"
+            notify: "nameChanged"
+            index: 1
+            lineNumber: 30
+            isReadonly: true
+        }
+        Property {
+            name: "networks"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "networks"
+            index: 2
+            lineNumber: 35
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "address"
+            type: "QString"
+            bindable: "bindableAddress"
+            read: "default"
+            notify: "addressChanged"
+            index: 3
+            lineNumber: 37
+            isReadonly: true
+        }
+        Property {
+            name: "connected"
+            type: "bool"
+            bindable: "bindableConnected"
+            read: "default"
+            notify: "connectedChanged"
+            index: 4
+            lineNumber: 39
+            isReadonly: true
+        }
+        Property {
+            name: "state"
+            type: "qs::network::ConnectionState::Enum"
+            bindable: "bindableState"
+            read: "default"
+            notify: "stateChanged"
+            index: 5
+            lineNumber: 41
+            isReadonly: true
+        }
+        Property {
+            name: "nmManaged"
+            type: "bool"
+            read: "nmManaged"
+            write: "setNmManaged"
+            notify: "nmManagedChanged"
+            index: 6
+            lineNumber: 45
+        }
+        Property {
+            name: "autoconnect"
+            type: "bool"
+            read: "autoconnect"
+            write: "setAutoconnect"
+            notify: "autoconnectChanged"
+            index: 7
+            lineNumber: 47
+        }
+        Signal { name: "requestDisconnect"; lineNumber: 74 }
+        Signal {
+            name: "requestSetAutoconnect"
+            lineNumber: 75
+            Parameter { name: "autoconnect"; type: "bool" }
+        }
+        Signal {
+            name: "requestSetNmManaged"
+            lineNumber: 76
+            Parameter { name: "managed"; type: "bool" }
+        }
+        Signal { name: "nameChanged"; lineNumber: 77 }
+        Signal { name: "addressChanged"; lineNumber: 78 }
+        Signal { name: "connectedChanged"; lineNumber: 79 }
+        Signal { name: "stateChanged"; lineNumber: 80 }
+        Signal { name: "nmManagedChanged"; lineNumber: 81 }
+        Signal { name: "autoconnectChanged"; lineNumber: 82 }
+        Method { name: "disconnect"; lineNumber: 54 }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 79
+        name: "qs::network::NetworkingQml"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/Networking 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "devices"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "devices"
+            index: 0
+            lineNumber: 86
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "backend"
+            type: "qs::network::NetworkBackendType::Enum"
+            read: "backend"
+            index: 1
+            lineNumber: 88
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "wifiEnabled"
+            type: "bool"
+            read: "wifiEnabled"
+            write: "setWifiEnabled"
+            notify: "wifiEnabledChanged"
+            index: 2
+            lineNumber: 90
+        }
+        Property {
+            name: "wifiHardwareEnabled"
+            type: "bool"
+            bindable: "bindableWifiHardwareEnabled"
+            read: "default"
+            notify: "wifiHardwareEnabledChanged"
+            index: 3
+            lineNumber: 92
+            isReadonly: true
+        }
+        Property {
+            name: "canCheckConnectivity"
+            type: "bool"
+            bindable: "bindableCanCheckConnectivity"
+            read: "default"
+            notify: "canCheckConnectivityChanged"
+            index: 4
+            lineNumber: 94
+            isReadonly: true
+        }
+        Property {
+            name: "connectivityCheckEnabled"
+            type: "bool"
+            read: "connectivityCheckEnabled"
+            write: "setConnectivityCheckEnabled"
+            notify: "connectivityCheckEnabledChanged"
+            index: 5
+            lineNumber: 96
+        }
+        Property {
+            name: "connectivity"
+            type: "qs::network::NetworkConnectivity::Enum"
+            bindable: "bindableConnectivity"
+            read: "default"
+            notify: "connectivityChanged"
+            index: 6
+            lineNumber: 106
+            isReadonly: true
+        }
+        Signal { name: "wifiEnabledChanged"; lineNumber: 144 }
+        Signal { name: "wifiHardwareEnabledChanged"; lineNumber: 145 }
+        Signal { name: "canCheckConnectivityChanged"; lineNumber: 146 }
+        Signal { name: "connectivityCheckEnabledChanged"; lineNumber: 147 }
+        Signal { name: "connectivityChanged"; lineNumber: 148 }
+        Method { name: "checkConnectivity"; lineNumber: 114 }
+    }
+    Component {
+        file: "wifi.hpp"
+        lineNumber: 57
+        name: "qs::network::WifiDevice"
+        accessSemantics: "reference"
+        prototype: "qs::network::NetworkDevice"
+        exports: ["Quickshell.Networking/WifiDevice 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "scannerEnabled"
+            type: "bool"
+            bindable: "bindableScannerEnabled"
+            read: "scannerEnabled"
+            write: "setScannerEnabled"
+            notify: "scannerEnabledChanged"
+            index: 0
+            lineNumber: 65
+        }
+        Property {
+            name: "mode"
+            type: "WifiDeviceMode::Enum"
+            bindable: "bindableMode"
+            read: "default"
+            notify: "modeChanged"
+            index: 1
+            lineNumber: 67
+            isReadonly: true
+        }
+        Signal { name: "modeChanged"; lineNumber: 79 }
+        Signal {
+            name: "scannerEnabledChanged"
+            lineNumber: 80
+            Parameter { name: "enabled"; type: "bool" }
+        }
+    }
+    Component {
+        file: "enums.hpp"
+        lineNumber: 133
+        name: "qs::network::WifiDeviceMode"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/WifiDeviceMode 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 139
+            values: ["AdHoc", "Station", "AccessPoint", "Mesh", "Unknown"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 152
+            Parameter { name: "mode"; type: "WifiDeviceMode::Enum" }
+        }
+    }
+    Component {
+        file: "wifi.hpp"
+        lineNumber: 17
+        name: "qs::network::WifiNetwork"
+        accessSemantics: "reference"
+        prototype: "qs::network::Network"
+        exports: ["Quickshell.Networking/WifiNetwork 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "signalStrength"
+            type: "double"
+            bindable: "bindableSignalStrength"
+            read: "default"
+            notify: "signalStrengthChanged"
+            index: 0
+            lineNumber: 23
+            isReadonly: true
+        }
+        Property {
+            name: "security"
+            type: "WifiSecurityType::Enum"
+            bindable: "bindableSecurity"
+            read: "default"
+            notify: "securityChanged"
+            index: 1
+            lineNumber: 25
+            isReadonly: true
+        }
+        Signal {
+            name: "requestConnectWithPsk"
+            lineNumber: 45
+            Parameter { name: "psk"; type: "QString" }
+        }
+        Signal { name: "signalStrengthChanged"; lineNumber: 46 }
+        Signal { name: "securityChanged"; lineNumber: 47 }
+        Method {
+            name: "connectWithPsk"
+            lineNumber: 39
+            Parameter { name: "psk"; type: "QString" }
+        }
+    }
+    Component {
+        file: "enums.hpp"
+        lineNumber: 108
+        name: "qs::network::WifiSecurityType"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Networking/WifiSecurityType 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 114
+            values: [
+                "Wpa3SuiteB192",
+                "Sae",
+                "Wpa2Eap",
+                "Wpa2Psk",
+                "WpaEap",
+                "WpaPsk",
+                "StaticWep",
+                "DynamicWep",
+                "Leap",
+                "Owe",
+                "Open",
+                "Unknown"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 129
+            Parameter { name: "type"; type: "WifiSecurityType::Enum" }
+        }
+    }
+    Component {
+        file: "wired.hpp"
+        lineNumber: 15
+        name: "qs::network::WiredDevice"
+        accessSemantics: "reference"
+        prototype: "qs::network::NetworkDevice"
+        exports: ["Quickshell.Networking/WiredDevice 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "network"
+            type: "Network"
+            isPointer: true
+            bindable: "bindableNetwork"
+            read: "network"
+            notify: "networkChanged"
+            index: 0
+            lineNumber: 23
+            isReadonly: true
+        }
+        Property {
+            name: "linkSpeed"
+            type: "uint"
+            bindable: "bindableLinkSpeed"
+            read: "default"
+            notify: "linkSpeedChanged"
+            index: 1
+            lineNumber: 25
+            isReadonly: true
+        }
+        Property {
+            name: "hasLink"
+            type: "bool"
+            bindable: "bindableHasLink"
+            read: "default"
+            notify: "hasLinkChanged"
+            index: 2
+            lineNumber: 27
+            isReadonly: true
+        }
+        Signal { name: "networkChanged"; lineNumber: 41 }
+        Signal { name: "linkSpeedChanged"; lineNumber: 42 }
+        Signal { name: "hasLinkChanged"; lineNumber: 43 }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Services.Greetd
+linktarget quickshell-service-greetdplugin
+optional plugin quickshell-service-greetdplugin
+classname Quickshell_Services_GreetdPlugin
+typeinfo quickshell-service-greetd.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Services/Greetd/
+depends QtQuick
+
@@ -0,0 +1,127 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "qml.hpp"
+        lineNumber: 16
+        name: "Greetd"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Greetd/Greetd 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "available"
+            type: "bool"
+            read: "isAvailable"
+            index: 0
+            lineNumber: 19
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "state"
+            type: "GreetdState::Enum"
+            read: "state"
+            notify: "stateChanged"
+            index: 1
+            lineNumber: 21
+            isReadonly: true
+        }
+        Property {
+            name: "user"
+            type: "QString"
+            read: "user"
+            notify: "userChanged"
+            index: 2
+            lineNumber: 23
+            isReadonly: true
+        }
+        Signal {
+            name: "authMessage"
+            lineNumber: 78
+            Parameter { name: "message"; type: "QString" }
+            Parameter { name: "error"; type: "bool" }
+            Parameter { name: "responseRequired"; type: "bool" }
+            Parameter { name: "echoResponse"; type: "bool" }
+        }
+        Signal {
+            name: "authFailure"
+            lineNumber: 82
+            Parameter { name: "message"; type: "QString" }
+        }
+        Signal { name: "readyToLaunch"; lineNumber: 84 }
+        Signal { name: "launched"; lineNumber: 89 }
+        Signal {
+            name: "error"
+            lineNumber: 91
+            Parameter { name: "error"; type: "QString" }
+        }
+        Signal { name: "stateChanged"; lineNumber: 93 }
+        Signal { name: "userChanged"; lineNumber: 94 }
+        Method {
+            name: "createSession"
+            lineNumber: 31
+            Parameter { name: "user"; type: "QString" }
+        }
+        Method { name: "cancelSession"; lineNumber: 33 }
+        Method {
+            name: "respond"
+            lineNumber: 37
+            Parameter { name: "response"; type: "QString" }
+        }
+        Method {
+            name: "launch"
+            lineNumber: 44
+            Parameter { name: "command"; type: "QString"; isList: true }
+        }
+        Method {
+            name: "launch"
+            lineNumber: 47
+            Parameter { name: "command"; type: "QString"; isList: true }
+            Parameter { name: "environment"; type: "QString"; isList: true }
+        }
+        Method {
+            name: "launch"
+            lineNumber: 59
+            Parameter { name: "command"; type: "QString"; isList: true }
+            Parameter { name: "environment"; type: "QString"; isList: true }
+            Parameter { name: "quit"; type: "bool" }
+        }
+    }
+    Component {
+        file: "connection.hpp"
+        lineNumber: 15
+        name: "GreetdState"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Greetd/GreetdState 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 21
+            values: [
+                "Inactive",
+                "Authenticating",
+                "ReadyToLaunch",
+                "Launching",
+                "Launched"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 30
+            Parameter { name: "value"; type: "GreetdState::Enum" }
+        }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Services.Mpris
+linktarget quickshell-service-mprisplugin
+optional plugin quickshell-service-mprisplugin
+classname Quickshell_Services_MprisPlugin
+typeinfo quickshell-service-mpris.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Services/Mpris/
+depends Quickshell
+
@@ -0,0 +1,529 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "player.hpp"
+        lineNumber: 38
+        name: "qs::service::mpris::MprisLoopState"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Mpris/MprisLoopState 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 44
+            values: ["None", "Track", "Playlist"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 51
+            Parameter { name: "status"; type: "qs::service::mpris::MprisLoopState::Enum" }
+        }
+    }
+    Component {
+        file: "player.hpp"
+        lineNumber: 20
+        name: "qs::service::mpris::MprisPlaybackState"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Mpris/MprisPlaybackState 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 26
+            values: ["Stopped", "Playing", "Paused"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 33
+            Parameter { name: "status"; type: "qs::service::mpris::MprisPlaybackState::Enum" }
+        }
+    }
+    Component {
+        file: "player.hpp"
+        lineNumber: 87
+        name: "qs::service::mpris::MprisPlayer"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Mpris/MprisPlayer 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "canControl"
+            type: "bool"
+            bindable: "bindableCanControl"
+            read: "default"
+            notify: "canControlChanged"
+            index: 0
+            lineNumber: 90
+            isReadonly: true
+        }
+        Property {
+            name: "canPlay"
+            type: "bool"
+            bindable: "bindableCanPlay"
+            read: "default"
+            notify: "canPlayChanged"
+            index: 1
+            lineNumber: 91
+            isReadonly: true
+        }
+        Property {
+            name: "canPause"
+            type: "bool"
+            bindable: "bindableCanPause"
+            read: "default"
+            notify: "canPauseChanged"
+            index: 2
+            lineNumber: 92
+            isReadonly: true
+        }
+        Property {
+            name: "canTogglePlaying"
+            type: "bool"
+            bindable: "bindableCanTogglePlaying"
+            read: "default"
+            notify: "canTogglePlayingChanged"
+            index: 3
+            lineNumber: 93
+            isReadonly: true
+        }
+        Property {
+            name: "canSeek"
+            type: "bool"
+            bindable: "bindableCanSeek"
+            read: "default"
+            notify: "canSeekChanged"
+            index: 4
+            lineNumber: 94
+            isReadonly: true
+        }
+        Property {
+            name: "canGoNext"
+            type: "bool"
+            bindable: "bindableCanGoNext"
+            read: "default"
+            notify: "canGoNextChanged"
+            index: 5
+            lineNumber: 95
+            isReadonly: true
+        }
+        Property {
+            name: "canGoPrevious"
+            type: "bool"
+            bindable: "bindableCanGoPrevious"
+            read: "default"
+            notify: "canGoPreviousChanged"
+            index: 6
+            lineNumber: 96
+            isReadonly: true
+        }
+        Property {
+            name: "canQuit"
+            type: "bool"
+            bindable: "bindableCanQuit"
+            read: "default"
+            notify: "canQuitChanged"
+            index: 7
+            lineNumber: 97
+            isReadonly: true
+        }
+        Property {
+            name: "canRaise"
+            type: "bool"
+            bindable: "bindableCanRaise"
+            read: "default"
+            notify: "canRaiseChanged"
+            index: 8
+            lineNumber: 98
+            isReadonly: true
+        }
+        Property {
+            name: "canSetFullscreen"
+            type: "bool"
+            bindable: "bindableCanSetFullscreen"
+            read: "default"
+            notify: "canSetFullscreenChanged"
+            index: 9
+            lineNumber: 99
+            isReadonly: true
+        }
+        Property {
+            name: "identity"
+            type: "QString"
+            bindable: "bindableIdentity"
+            read: "default"
+            notify: "identityChanged"
+            index: 10
+            lineNumber: 101
+            isReadonly: true
+        }
+        Property {
+            name: "desktopEntry"
+            type: "QString"
+            bindable: "bindableDesktopEntry"
+            read: "default"
+            notify: "desktopEntryChanged"
+            index: 11
+            lineNumber: 103
+            isReadonly: true
+        }
+        Property {
+            name: "dbusName"
+            type: "QString"
+            read: "address"
+            index: 12
+            lineNumber: 105
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "position"
+            type: "double"
+            read: "position"
+            write: "setPosition"
+            notify: "positionChanged"
+            index: 13
+            lineNumber: 139
+        }
+        Property {
+            name: "positionSupported"
+            type: "bool"
+            read: "positionSupported"
+            notify: "positionSupportedChanged"
+            index: 14
+            lineNumber: 140
+            isReadonly: true
+        }
+        Property {
+            name: "length"
+            type: "double"
+            read: "length"
+            notify: "lengthChanged"
+            index: 15
+            lineNumber: 143
+            isReadonly: true
+        }
+        Property {
+            name: "lengthSupported"
+            type: "bool"
+            bindable: "bindableLengthSupported"
+            read: "default"
+            notify: "lengthSupportedChanged"
+            index: 16
+            lineNumber: 144
+            isReadonly: true
+        }
+        Property {
+            name: "volume"
+            type: "double"
+            read: "volume"
+            write: "setVolume"
+            notify: "volumeChanged"
+            index: 17
+            lineNumber: 148
+        }
+        Property {
+            name: "volumeSupported"
+            type: "bool"
+            read: "volumeSupported"
+            notify: "volumeSupportedChanged"
+            index: 18
+            lineNumber: 149
+            isReadonly: true
+        }
+        Property {
+            name: "metadata"
+            type: "QVariantMap"
+            bindable: "bindableMetadata"
+            read: "default"
+            notify: "metadataChanged"
+            index: 19
+            lineNumber: 158
+            isReadonly: true
+        }
+        Property {
+            name: "uniqueId"
+            type: "uint"
+            bindable: "bindableUniqueId"
+            read: "default"
+            notify: "uniqueIdChanged"
+            index: 20
+            lineNumber: 163
+            isReadonly: true
+        }
+        Property {
+            name: "trackTitle"
+            type: "QString"
+            bindable: "bindableTrackTitle"
+            read: "default"
+            notify: "trackTitleChanged"
+            index: 21
+            lineNumber: 168
+            isReadonly: true
+        }
+        Property {
+            name: "trackArtist"
+            type: "QString"
+            bindable: "bindableTrackArtist"
+            read: "default"
+            notify: "trackArtistChanged"
+            index: 22
+            lineNumber: 173
+            isReadonly: true
+        }
+        Property {
+            name: "trackArtists"
+            type: "QString"
+            bindable: "bindableTrackArtist"
+            read: "default"
+            notify: "trackArtistChanged"
+            index: 23
+            lineNumber: 175
+            isReadonly: true
+        }
+        Property {
+            name: "trackAlbum"
+            type: "QString"
+            bindable: "bindableTrackAlbum"
+            read: "default"
+            notify: "trackAlbumChanged"
+            index: 24
+            lineNumber: 180
+            isReadonly: true
+        }
+        Property {
+            name: "trackAlbumArtist"
+            type: "QString"
+            bindable: "bindableTrackAlbumArtist"
+            read: "default"
+            notify: "trackAlbumArtistChanged"
+            index: 25
+            lineNumber: 185
+            isReadonly: true
+        }
+        Property {
+            name: "trackArtUrl"
+            type: "QString"
+            bindable: "bindableTrackArtUrl"
+            read: "default"
+            notify: "trackArtUrlChanged"
+            index: 26
+            lineNumber: 187
+            isReadonly: true
+        }
+        Property {
+            name: "playbackState"
+            type: "qs::service::mpris::MprisPlaybackState::Enum"
+            read: "playbackState"
+            write: "setPlaybackState"
+            notify: "playbackStateChanged"
+            index: 27
+            lineNumber: 194
+        }
+        Property {
+            name: "isPlaying"
+            type: "bool"
+            read: "isPlaying"
+            write: "setPlaying"
+            notify: "isPlayingChanged"
+            index: 28
+            lineNumber: 199
+        }
+        Property {
+            name: "loopState"
+            type: "qs::service::mpris::MprisLoopState::Enum"
+            read: "loopState"
+            write: "setLoopState"
+            notify: "loopStateChanged"
+            index: 29
+            lineNumber: 203
+        }
+        Property {
+            name: "loopSupported"
+            type: "bool"
+            read: "loopSupported"
+            notify: "loopSupportedChanged"
+            index: 30
+            lineNumber: 204
+            isReadonly: true
+        }
+        Property {
+            name: "rate"
+            type: "double"
+            read: "rate"
+            write: "setRate"
+            notify: "rateChanged"
+            index: 31
+            lineNumber: 211
+        }
+        Property {
+            name: "minRate"
+            type: "double"
+            bindable: "bindableMinRate"
+            read: "default"
+            notify: "minRateChanged"
+            index: 32
+            lineNumber: 212
+            isReadonly: true
+        }
+        Property {
+            name: "maxRate"
+            type: "double"
+            bindable: "bindableMaxRate"
+            read: "default"
+            notify: "maxRateChanged"
+            index: 33
+            lineNumber: 213
+            isReadonly: true
+        }
+        Property {
+            name: "shuffle"
+            type: "bool"
+            read: "shuffle"
+            write: "setShuffle"
+            notify: "shuffleChanged"
+            index: 34
+            lineNumber: 217
+        }
+        Property {
+            name: "shuffleSupported"
+            type: "bool"
+            read: "shuffleSupported"
+            notify: "shuffleSupportedChanged"
+            index: 35
+            lineNumber: 218
+            isReadonly: true
+        }
+        Property {
+            name: "fullscreen"
+            type: "bool"
+            read: "fullscreen"
+            write: "setFullscreen"
+            notify: "fullscreenChanged"
+            index: 36
+            lineNumber: 222
+        }
+        Property {
+            name: "supportedUriSchemes"
+            type: "QString"
+            isList: true
+            bindable: "bindableSupportedUriSchemes"
+            read: "default"
+            notify: "supportedUriSchemesChanged"
+            index: 37
+            lineNumber: 224
+            isReadonly: true
+        }
+        Property {
+            name: "supportedMimeTypes"
+            type: "QString"
+            isList: true
+            bindable: "bindableSupportedMimeTypes"
+            read: "default"
+            notify: "supportedMimeTypesChanged"
+            index: 38
+            lineNumber: 226
+            isReadonly: true
+        }
+        Signal { name: "trackChanged"; lineNumber: 359 }
+        Signal { name: "postTrackChanged"; lineNumber: 365 }
+        Signal { name: "ready"; lineNumber: 367 }
+        Signal { name: "canControlChanged"; lineNumber: 368 }
+        Signal { name: "canPlayChanged"; lineNumber: 369 }
+        Signal { name: "canPauseChanged"; lineNumber: 370 }
+        Signal { name: "canTogglePlayingChanged"; lineNumber: 371 }
+        Signal { name: "canSeekChanged"; lineNumber: 372 }
+        Signal { name: "canGoNextChanged"; lineNumber: 373 }
+        Signal { name: "canGoPreviousChanged"; lineNumber: 374 }
+        Signal { name: "canQuitChanged"; lineNumber: 375 }
+        Signal { name: "canRaiseChanged"; lineNumber: 376 }
+        Signal { name: "canSetFullscreenChanged"; lineNumber: 377 }
+        Signal { name: "identityChanged"; lineNumber: 378 }
+        Signal { name: "desktopEntryChanged"; lineNumber: 379 }
+        Signal { name: "positionChanged"; lineNumber: 380 }
+        Signal { name: "positionSupportedChanged"; lineNumber: 381 }
+        Signal { name: "lengthChanged"; lineNumber: 382 }
+        Signal { name: "lengthSupportedChanged"; lineNumber: 383 }
+        Signal { name: "volumeChanged"; lineNumber: 384 }
+        Signal { name: "volumeSupportedChanged"; lineNumber: 385 }
+        Signal { name: "metadataChanged"; lineNumber: 386 }
+        Signal { name: "uniqueIdChanged"; lineNumber: 387 }
+        Signal { name: "trackTitleChanged"; lineNumber: 388 }
+        Signal { name: "trackArtistChanged"; lineNumber: 389 }
+        Signal { name: "trackAlbumChanged"; lineNumber: 390 }
+        Signal { name: "trackAlbumArtistChanged"; lineNumber: 391 }
+        Signal { name: "trackArtUrlChanged"; lineNumber: 392 }
+        Signal { name: "playbackStateChanged"; lineNumber: 393 }
+        Signal { name: "isPlayingChanged"; lineNumber: 394 }
+        Signal { name: "loopStateChanged"; lineNumber: 395 }
+        Signal { name: "loopSupportedChanged"; lineNumber: 396 }
+        Signal { name: "rateChanged"; lineNumber: 397 }
+        Signal { name: "minRateChanged"; lineNumber: 398 }
+        Signal { name: "maxRateChanged"; lineNumber: 399 }
+        Signal { name: "shuffleChanged"; lineNumber: 400 }
+        Signal { name: "shuffleSupportedChanged"; lineNumber: 401 }
+        Signal { name: "fullscreenChanged"; lineNumber: 402 }
+        Signal { name: "supportedUriSchemesChanged"; lineNumber: 403 }
+        Signal { name: "supportedMimeTypesChanged"; lineNumber: 404 }
+        Method { name: "onGetAllFinished"; lineNumber: 407 }
+        Method { name: "onExportedPositionChanged"; lineNumber: 408 }
+        Method {
+            name: "onSeek"
+            lineNumber: 409
+            Parameter { name: "time"; type: "qlonglong" }
+        }
+        Method { name: "raise"; lineNumber: 237 }
+        Method { name: "quit"; lineNumber: 241 }
+        Method {
+            name: "openUri"
+            lineNumber: 246
+            Parameter { name: "uri"; type: "QString" }
+        }
+        Method { name: "next"; lineNumber: 250 }
+        Method { name: "previous"; lineNumber: 254 }
+        Method {
+            name: "seek"
+            lineNumber: 261
+            Parameter { name: "offset"; type: "double" }
+        }
+        Method { name: "play"; lineNumber: 263 }
+        Method { name: "pause"; lineNumber: 265 }
+        Method { name: "stop"; lineNumber: 267 }
+        Method { name: "togglePlaying"; lineNumber: 272 }
+    }
+    Component {
+        file: "watcher.hpp"
+        lineNumber: 45
+        name: "qs::service::mpris::MprisQml"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Mpris/Mpris 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "players"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "players"
+            index: 0
+            lineNumber: 51
+            isReadonly: true
+            isPropertyConstant: true
+        }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Services.Notifications
+linktarget quickshell-service-notificationsplugin
+optional plugin quickshell-service-notificationsplugin
+classname Quickshell_Services_NotificationsPlugin
+typeinfo quickshell-service-notifications.qmltypes
+prefer :/qt/qml/Quickshell/Services/Notifications/
+depends Quickshell
+depends QtQuick
+
@@ -0,0 +1,441 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "notification.hpp"
+        lineNumber: 66
+        name: "qs::service::notifications::Notification"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Notifications/Notification 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "id"
+            type: "uint"
+            read: "id"
+            index: 0
+            lineNumber: 72
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "tracked"
+            type: "bool"
+            read: "isTracked"
+            write: "setTracked"
+            notify: "trackedChanged"
+            index: 1
+            lineNumber: 76
+        }
+        Property {
+            name: "lastGeneration"
+            type: "bool"
+            read: "isLastGeneration"
+            index: 2
+            lineNumber: 82
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "expireTimeout"
+            type: "double"
+            bindable: "bindableExpireTimeout"
+            read: "default"
+            notify: "expireTimeoutChanged"
+            index: 3
+            lineNumber: 84
+            isReadonly: true
+        }
+        Property {
+            name: "appName"
+            type: "QString"
+            bindable: "bindableAppName"
+            read: "default"
+            notify: "appNameChanged"
+            index: 4
+            lineNumber: 86
+            isReadonly: true
+        }
+        Property {
+            name: "appIcon"
+            type: "QString"
+            bindable: "bindableAppIcon"
+            read: "default"
+            notify: "appIconChanged"
+            index: 5
+            lineNumber: 89
+            isReadonly: true
+        }
+        Property {
+            name: "summary"
+            type: "QString"
+            bindable: "bindableSummary"
+            read: "default"
+            notify: "summaryChanged"
+            index: 6
+            lineNumber: 91
+            isReadonly: true
+        }
+        Property {
+            name: "body"
+            type: "QString"
+            bindable: "bindableBody"
+            read: "default"
+            notify: "bodyChanged"
+            index: 7
+            lineNumber: 92
+            isReadonly: true
+        }
+        Property {
+            name: "urgency"
+            type: "qs::service::notifications::NotificationUrgency::Enum"
+            bindable: "bindableUrgency"
+            read: "default"
+            notify: "urgencyChanged"
+            index: 8
+            lineNumber: 93
+            isReadonly: true
+        }
+        Property {
+            name: "actions"
+            type: "QList<qs::service::notifications::NotificationAction*>"
+            read: "actions"
+            notify: "actionsChanged"
+            index: 9
+            lineNumber: 95
+            isReadonly: true
+        }
+        Property {
+            name: "hasActionIcons"
+            type: "bool"
+            bindable: "bindableHasActionIcons"
+            read: "default"
+            notify: "hasActionIconsChanged"
+            index: 10
+            lineNumber: 99
+            isReadonly: true
+        }
+        Property {
+            name: "resident"
+            type: "bool"
+            bindable: "bindableResident"
+            read: "default"
+            notify: "residentChanged"
+            index: 11
+            lineNumber: 101
+            isReadonly: true
+        }
+        Property {
+            name: "transient"
+            type: "bool"
+            bindable: "bindableTransient"
+            read: "default"
+            notify: "transientChanged"
+            index: 12
+            lineNumber: 103
+            isReadonly: true
+        }
+        Property {
+            name: "desktopEntry"
+            type: "QString"
+            bindable: "bindableDesktopEntry"
+            read: "default"
+            notify: "desktopEntryChanged"
+            index: 13
+            lineNumber: 105
+            isReadonly: true
+        }
+        Property {
+            name: "image"
+            type: "QString"
+            bindable: "bindableImage"
+            read: "default"
+            notify: "imageChanged"
+            index: 14
+            lineNumber: 109
+            isReadonly: true
+        }
+        Property {
+            name: "hasInlineReply"
+            type: "bool"
+            bindable: "bindableHasInlineReply"
+            read: "default"
+            notify: "hasInlineReplyChanged"
+            index: 15
+            lineNumber: 113
+            isReadonly: true
+        }
+        Property {
+            name: "inlineReplyPlaceholder"
+            type: "QString"
+            bindable: "bindableInlineReplyPlaceholder"
+            read: "default"
+            notify: "inlineReplyPlaceholderChanged"
+            index: 16
+            lineNumber: 115
+            isReadonly: true
+        }
+        Property {
+            name: "hints"
+            type: "QVariantMap"
+            bindable: "bindableHints"
+            read: "default"
+            notify: "hintsChanged"
+            index: 17
+            lineNumber: 118
+            isReadonly: true
+        }
+        Signal {
+            name: "closed"
+            lineNumber: 188
+            Parameter { name: "reason"; type: "qs::service::notifications::NotificationCloseReason::Enum" }
+        }
+        Signal { name: "trackedChanged"; lineNumber: 190 }
+        Signal { name: "expireTimeoutChanged"; lineNumber: 191 }
+        Signal { name: "appNameChanged"; lineNumber: 192 }
+        Signal { name: "appIconChanged"; lineNumber: 193 }
+        Signal { name: "summaryChanged"; lineNumber: 194 }
+        Signal { name: "bodyChanged"; lineNumber: 195 }
+        Signal { name: "urgencyChanged"; lineNumber: 196 }
+        Signal { name: "actionsChanged"; lineNumber: 197 }
+        Signal { name: "hasActionIconsChanged"; lineNumber: 198 }
+        Signal { name: "residentChanged"; lineNumber: 199 }
+        Signal { name: "transientChanged"; lineNumber: 200 }
+        Signal { name: "desktopEntryChanged"; lineNumber: 201 }
+        Signal { name: "imageChanged"; lineNumber: 202 }
+        Signal { name: "hasInlineReplyChanged"; lineNumber: 203 }
+        Signal { name: "inlineReplyPlaceholderChanged"; lineNumber: 204 }
+        Signal { name: "hintsChanged"; lineNumber: 205 }
+        Method { name: "expire"; lineNumber: 128 }
+        Method { name: "dismiss"; lineNumber: 131 }
+        Method {
+            name: "sendInlineReply"
+            lineNumber: 137
+            Parameter { name: "replyText"; type: "QString" }
+        }
+    }
+    Component {
+        file: "notification.hpp"
+        lineNumber: 241
+        name: "qs::service::notifications::NotificationAction"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Notifications/NotificationAction 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "identifier"
+            type: "QString"
+            read: "identifier"
+            index: 0
+            lineNumber: 247
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "text"
+            type: "QString"
+            read: "text"
+            notify: "textChanged"
+            index: 1
+            lineNumber: 249
+            isReadonly: true
+        }
+        Signal { name: "textChanged"; lineNumber: 268 }
+        Method { name: "invoke"; lineNumber: 261 }
+    }
+    Component {
+        file: "notification.hpp"
+        lineNumber: 39
+        name: "qs::service::notifications::NotificationCloseReason"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: [
+            "Quickshell.Services.Notifications/NotificationCloseReason 0.0"
+        ]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 45
+            values: ["Expired", "Dismissed", "CloseRequested"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 56
+            Parameter { name: "value"; type: "qs::service::notifications::NotificationCloseReason::Enum" }
+        }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 24
+        name: "qs::service::notifications::NotificationServerQml"
+        accessSemantics: "reference"
+        prototype: "PostReloadHook"
+        exports: ["Quickshell.Services.Notifications/NotificationServer 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "keepOnReload"
+            type: "bool"
+            read: "keepOnReload"
+            write: "setKeepOnReload"
+            notify: "keepOnReloadChanged"
+            index: 0
+            lineNumber: 31
+        }
+        Property {
+            name: "persistenceSupported"
+            type: "bool"
+            read: "persistenceSupported"
+            write: "setPersistenceSupported"
+            notify: "persistenceSupportedChanged"
+            index: 1
+            lineNumber: 34
+        }
+        Property {
+            name: "bodySupported"
+            type: "bool"
+            read: "bodySupported"
+            write: "setBodySupported"
+            notify: "bodySupportedChanged"
+            index: 2
+            lineNumber: 40
+        }
+        Property {
+            name: "bodyMarkupSupported"
+            type: "bool"
+            read: "bodyMarkupSupported"
+            write: "setBodyMarkupSupported"
+            notify: "bodyMarkupSupportedChanged"
+            index: 3
+            lineNumber: 47
+        }
+        Property {
+            name: "bodyHyperlinksSupported"
+            type: "bool"
+            read: "bodyHyperlinksSupported"
+            write: "setBodyHyperlinksSupported"
+            notify: "bodyHyperlinksSupportedChanged"
+            index: 4
+            lineNumber: 54
+        }
+        Property {
+            name: "bodyImagesSupported"
+            type: "bool"
+            read: "bodyImagesSupported"
+            write: "setBodyImagesSupported"
+            notify: "bodyImagesSupportedChanged"
+            index: 5
+            lineNumber: 61
+        }
+        Property {
+            name: "actionsSupported"
+            type: "bool"
+            read: "actionsSupported"
+            write: "setActionsSupported"
+            notify: "actionsSupportedChanged"
+            index: 6
+            lineNumber: 63
+        }
+        Property {
+            name: "actionIconsSupported"
+            type: "bool"
+            read: "actionIconsSupported"
+            write: "setActionIconsSupported"
+            notify: "actionIconsSupportedChanged"
+            index: 7
+            lineNumber: 65
+        }
+        Property {
+            name: "imageSupported"
+            type: "bool"
+            read: "imageSupported"
+            write: "setImageSupported"
+            notify: "imageSupportedChanged"
+            index: 8
+            lineNumber: 67
+        }
+        Property {
+            name: "inlineReplySupported"
+            type: "bool"
+            read: "inlineReplySupported"
+            write: "setInlineReplySupported"
+            notify: "inlineReplySupportedChanged"
+            index: 9
+            lineNumber: 69
+        }
+        Property {
+            name: "trackedNotifications"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "trackedNotifications"
+            notify: "trackedNotificationsChanged"
+            index: 10
+            lineNumber: 72
+            isReadonly: true
+        }
+        Property {
+            name: "extraHints"
+            type: "QString"
+            isList: true
+            read: "extraHints"
+            write: "setExtraHints"
+            notify: "extraHintsChanged"
+            index: 11
+            lineNumber: 74
+        }
+        Signal {
+            name: "notification"
+            lineNumber: 120
+            Parameter {
+                name: "notification"
+                type: "qs::service::notifications::Notification"
+                isPointer: true
+            }
+        }
+        Signal { name: "keepOnReloadChanged"; lineNumber: 122 }
+        Signal { name: "persistenceSupportedChanged"; lineNumber: 123 }
+        Signal { name: "bodySupportedChanged"; lineNumber: 124 }
+        Signal { name: "bodyMarkupSupportedChanged"; lineNumber: 125 }
+        Signal { name: "bodyHyperlinksSupportedChanged"; lineNumber: 126 }
+        Signal { name: "bodyImagesSupportedChanged"; lineNumber: 127 }
+        Signal { name: "actionsSupportedChanged"; lineNumber: 128 }
+        Signal { name: "actionIconsSupportedChanged"; lineNumber: 129 }
+        Signal { name: "imageSupportedChanged"; lineNumber: 130 }
+        Signal { name: "inlineReplySupportedChanged"; lineNumber: 131 }
+        Signal { name: "extraHintsChanged"; lineNumber: 132 }
+        Signal { name: "trackedNotificationsChanged"; lineNumber: 133 }
+    }
+    Component {
+        file: "notification.hpp"
+        lineNumber: 21
+        name: "qs::service::notifications::NotificationUrgency"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Notifications/NotificationUrgency 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 27
+            values: ["Low", "Normal", "Critical"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 34
+            Parameter { name: "value"; type: "qs::service::notifications::NotificationUrgency::Enum" }
+        }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Services.Pam
+linktarget quickshell-service-pamplugin
+optional plugin quickshell-service-pamplugin
+classname Quickshell_Services_PamPlugin
+typeinfo quickshell-service-pam.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Services/Pam/
+depends QtQuick
+
@@ -0,0 +1,181 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "qml.hpp"
+        lineNumber: 20
+        name: "PamContext"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        interfaces: ["QQmlParserStatus"]
+        exports: ["Quickshell.Services.Pam/PamContext 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "active"
+            type: "bool"
+            read: "isActive"
+            write: "setActive"
+            notify: "activeChanged"
+            index: 0
+            lineNumber: 31
+        }
+        Property {
+            name: "config"
+            type: "QString"
+            read: "config"
+            write: "setConfig"
+            notify: "configChanged"
+            index: 1
+            lineNumber: 37
+        }
+        Property {
+            name: "configDirectory"
+            type: "QString"
+            read: "configDirectory"
+            write: "setConfigDirectory"
+            notify: "configDirectoryChanged"
+            index: 2
+            lineNumber: 45
+        }
+        Property {
+            name: "user"
+            type: "QString"
+            read: "user"
+            write: "setUser"
+            notify: "userChanged"
+            index: 3
+            lineNumber: 49
+        }
+        Property {
+            name: "message"
+            type: "QString"
+            read: "message"
+            notify: "messageChanged"
+            index: 4
+            lineNumber: 51
+            isReadonly: true
+        }
+        Property {
+            name: "messageIsError"
+            type: "bool"
+            read: "messageIsError"
+            notify: "messageIsErrorChanged"
+            index: 5
+            lineNumber: 53
+            isReadonly: true
+        }
+        Property {
+            name: "responseRequired"
+            type: "bool"
+            read: "isResponseRequired"
+            notify: "responseRequiredChanged"
+            index: 6
+            lineNumber: 57
+            isReadonly: true
+        }
+        Property {
+            name: "responseVisible"
+            type: "bool"
+            read: "isResponseVisible"
+            notify: "responseVisibleChanged"
+            index: 7
+            lineNumber: 59
+            isReadonly: true
+        }
+        Signal {
+            name: "completed"
+            lineNumber: 101
+            Parameter { name: "result"; type: "PamResult::Enum" }
+        }
+        Signal {
+            name: "error"
+            lineNumber: 105
+            Parameter { name: "error"; type: "PamError::Enum" }
+        }
+        Signal { name: "pamMessage"; lineNumber: 109 }
+        Signal { name: "activeChanged"; lineNumber: 111 }
+        Signal { name: "configChanged"; lineNumber: 112 }
+        Signal { name: "configDirectoryChanged"; lineNumber: 113 }
+        Signal { name: "userChanged"; lineNumber: 114 }
+        Signal { name: "messageChanged"; lineNumber: 115 }
+        Signal { name: "messageIsErrorChanged"; lineNumber: 116 }
+        Signal { name: "responseRequiredChanged"; lineNumber: 117 }
+        Signal { name: "responseVisibleChanged"; lineNumber: 118 }
+        Method {
+            name: "onCompleted"
+            lineNumber: 121
+            Parameter { name: "result"; type: "PamResult::Enum" }
+        }
+        Method {
+            name: "onError"
+            lineNumber: 122
+            Parameter { name: "error"; type: "PamError::Enum" }
+        }
+        Method {
+            name: "onMessage"
+            lineNumber: 123
+            Parameter { name: "message"; type: "QString" }
+            Parameter { name: "isError"; type: "bool" }
+            Parameter { name: "responseRequired"; type: "bool" }
+            Parameter { name: "responseVisible"; type: "bool" }
+        }
+        Method { name: "start"; type: "bool"; lineNumber: 72 }
+        Method { name: "abort"; lineNumber: 75 }
+        Method {
+            name: "respond"
+            lineNumber: 80
+            Parameter { name: "response"; type: "QString" }
+        }
+    }
+    Component {
+        file: "conversation.hpp"
+        lineNumber: 41
+        name: "PamError"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pam/PamError 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 47
+            values: ["StartFailed", "TryAuthFailed", "InternalError"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 58
+            Parameter { name: "value"; type: "PamError::Enum" }
+        }
+    }
+    Component {
+        file: "conversation.hpp"
+        lineNumber: 18
+        name: "PamResult"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pam/PamResult 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 24
+            values: ["Success", "Failed", "Error", "MaxTries"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 36
+            Parameter { name: "value"; type: "PamResult::Enum" }
+        }
+    }
+}
@@ -0,0 +1,10 @@
+module Quickshell.Services.Pipewire
+linktarget quickshell-service-pipewireplugin
+optional plugin quickshell-service-pipewireplugin
+classname Quickshell_Services_PipewirePlugin
+typeinfo quickshell-service-pipewire.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Services/Pipewire/
+depends Quickshell
+depends QtQuick
+
@@ -0,0 +1,646 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "qml.hpp"
+        lineNumber: 56
+        name: "qs::service::pipewire::Pipewire"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pipewire/Pipewire 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "nodes"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "nodes"
+            index: 0
+            lineNumber: 67
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "links"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "links"
+            index: 1
+            lineNumber: 79
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "linkGroups"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "linkGroups"
+            index: 2
+            lineNumber: 87
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "defaultAudioSink"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "defaultAudioSink"
+            notify: "defaultAudioSinkChanged"
+            index: 3
+            lineNumber: 97
+            isReadonly: true
+        }
+        Property {
+            name: "defaultAudioSource"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "defaultAudioSource"
+            notify: "defaultAudioSourceChanged"
+            index: 4
+            lineNumber: 107
+            isReadonly: true
+        }
+        Property {
+            name: "preferredDefaultAudioSink"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "defaultConfiguredAudioSink"
+            write: "setDefaultConfiguredAudioSink"
+            notify: "defaultConfiguredAudioSinkChanged"
+            index: 5
+            lineNumber: 114
+        }
+        Property {
+            name: "preferredDefaultAudioSource"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "defaultConfiguredAudioSource"
+            write: "setDefaultConfiguredAudioSource"
+            notify: "defaultConfiguredAudioSourceChanged"
+            index: 6
+            lineNumber: 121
+        }
+        Property {
+            name: "ready"
+            type: "bool"
+            read: "isReady"
+            notify: "readyChanged"
+            index: 7
+            lineNumber: 128
+            isReadonly: true
+        }
+        Signal { name: "defaultAudioSinkChanged"; lineNumber: 152 }
+        Signal { name: "defaultAudioSourceChanged"; lineNumber: 153 }
+        Signal { name: "defaultConfiguredAudioSinkChanged"; lineNumber: 155 }
+        Signal { name: "defaultConfiguredAudioSourceChanged"; lineNumber: 156 }
+        Signal { name: "readyChanged"; lineNumber: 158 }
+        Method {
+            name: "onNodeAdded"
+            lineNumber: 161
+            Parameter { name: "node"; type: "PwNode"; isPointer: true }
+        }
+        Method {
+            name: "onNodeRemoved"
+            lineNumber: 162
+            Parameter { name: "object"; type: "QObject"; isPointer: true }
+        }
+        Method {
+            name: "onLinkAdded"
+            lineNumber: 163
+            Parameter { name: "link"; type: "PwLink"; isPointer: true }
+        }
+        Method {
+            name: "onLinkRemoved"
+            lineNumber: 164
+            Parameter { name: "object"; type: "QObject"; isPointer: true }
+        }
+        Method {
+            name: "onLinkGroupAdded"
+            lineNumber: 165
+            Parameter { name: "group"; type: "PwLinkGroup"; isPointer: true }
+        }
+        Method {
+            name: "onLinkGroupRemoved"
+            lineNumber: 166
+            Parameter { name: "object"; type: "QObject"; isPointer: true }
+        }
+    }
+    Component {
+        file: "node.hpp"
+        lineNumber: 27
+        name: "qs::service::pipewire::PwAudioChannel"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pipewire/PwAudioChannel 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            lineNumber: 33
+            values: [
+                "Unknown",
+                "NA",
+                "Mono",
+                "FrontCenter",
+                "FrontLeft",
+                "FrontRight",
+                "FrontLeftCenter",
+                "FrontRightCenter",
+                "FrontLeftWide",
+                "FrontRightWide",
+                "FrontCenterHigh",
+                "FrontLeftHigh",
+                "FrontRightHigh",
+                "LowFrequencyEffects",
+                "LowFrequencyEffects2",
+                "LowFrequencyEffectsLeft",
+                "LowFrequencyEffectsRight",
+                "SideLeft",
+                "SideRight",
+                "RearCenter",
+                "RearLeft",
+                "RearRight",
+                "RearLeftCenter",
+                "RearRightCenter",
+                "TopCenter",
+                "TopFrontCenter",
+                "TopFrontLeft",
+                "TopFrontRight",
+                "TopFrontLeftCenter",
+                "TopFrontRightCenter",
+                "TopSideLeft",
+                "TopSideRight",
+                "TopRearCenter",
+                "TopRearLeft",
+                "TopRearRight",
+                "BottomCenter",
+                "BottomLeftCenter",
+                "BottomRightCenter",
+                "AuxRangeStart",
+                "AuxRangeEnd",
+                "CustomRangeStart"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 89
+            Parameter { name: "value"; type: "qs::service::pipewire::PwAudioChannel::Enum" }
+        }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 388
+        name: "qs::service::pipewire::PwLinkGroupIface"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pipewire/PwLinkGroup 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "target"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "target"
+            index: 0
+            lineNumber: 393
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "source"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "source"
+            index: 1
+            lineNumber: 395
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "state"
+            type: "qs::service::pipewire::PwLinkState::Enum"
+            read: "state"
+            notify: "stateChanged"
+            index: 2
+            lineNumber: 399
+            isReadonly: true
+        }
+        Signal { name: "stateChanged"; lineNumber: 420 }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 350
+        name: "qs::service::pipewire::PwLinkIface"
+        accessSemantics: "reference"
+        prototype: "qs::service::pipewire::PwObjectIface"
+        exports: ["Quickshell.Services.Pipewire/PwLink 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "id"
+            type: "uint"
+            read: "id"
+            index: 0
+            lineNumber: 356
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "target"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "target"
+            index: 1
+            lineNumber: 358
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "source"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "source"
+            index: 2
+            lineNumber: 360
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "state"
+            type: "PwLinkState::Enum"
+            read: "state"
+            notify: "stateChanged"
+            index: 3
+            lineNumber: 364
+            isReadonly: true
+        }
+        Signal { name: "stateChanged"; lineNumber: 380 }
+    }
+    Component {
+        file: "link.hpp"
+        lineNumber: 18
+        name: "qs::service::pipewire::PwLinkState"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pipewire/PwLinkState 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "qint8"
+            lineNumber: 24
+            values: [
+                "Error",
+                "Unlinked",
+                "Init",
+                "Negotiating",
+                "Allocating",
+                "Paused",
+                "Active"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 35
+            Parameter { name: "value"; type: "qs::service::pipewire::PwLinkState::Enum" }
+        }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 220
+        name: "qs::service::pipewire::PwNodeAudioIface"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pipewire/PwNodeAudio 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "muted"
+            type: "bool"
+            read: "isMuted"
+            write: "setMuted"
+            notify: "mutedChanged"
+            index: 0
+            lineNumber: 226
+        }
+        Property {
+            name: "volume"
+            type: "float"
+            read: "averageVolume"
+            write: "setAverageVolume"
+            notify: "volumesChanged"
+            index: 1
+            lineNumber: 231
+        }
+        Property {
+            name: "channels"
+            type: "qs::service::pipewire::PwAudioChannel::Enum"
+            isList: true
+            read: "channels"
+            notify: "channelsChanged"
+            index: 2
+            lineNumber: 235
+            isReadonly: true
+        }
+        Property {
+            name: "volumes"
+            type: "float"
+            isList: true
+            read: "volumes"
+            write: "setVolumes"
+            notify: "volumesChanged"
+            index: 3
+            lineNumber: 241
+        }
+        Signal { name: "mutedChanged"; lineNumber: 261 }
+        Signal { name: "channelsChanged"; lineNumber: 262 }
+        Signal { name: "volumesChanged"; lineNumber: 263 }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 270
+        name: "qs::service::pipewire::PwNodeIface"
+        accessSemantics: "reference"
+        prototype: "qs::service::pipewire::PwObjectIface"
+        exports: ["Quickshell.Services.Pipewire/PwNode 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "id"
+            type: "uint"
+            read: "id"
+            index: 0
+            lineNumber: 276
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "name"
+            type: "QString"
+            read: "name"
+            index: 1
+            lineNumber: 278
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "description"
+            type: "QString"
+            read: "description"
+            index: 2
+            lineNumber: 282
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "nickname"
+            type: "QString"
+            read: "nickname"
+            index: 3
+            lineNumber: 286
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "isSink"
+            type: "bool"
+            read: "isSink"
+            index: 4
+            lineNumber: 289
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "isStream"
+            type: "bool"
+            read: "isStream"
+            index: 5
+            lineNumber: 292
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "type"
+            type: "qs::service::pipewire::PwNodeType::Flags"
+            read: "type"
+            index: 6
+            lineNumber: 294
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "properties"
+            type: "QVariantMap"
+            read: "properties"
+            notify: "propertiesChanged"
+            index: 7
+            lineNumber: 307
+            isReadonly: true
+        }
+        Property {
+            name: "audio"
+            type: "qs::service::pipewire::PwNodeAudioIface"
+            isPointer: true
+            read: "audio"
+            index: 8
+            lineNumber: 312
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "ready"
+            type: "bool"
+            read: "isReady"
+            notify: "readyChanged"
+            index: 9
+            lineNumber: 317
+            isReadonly: true
+        }
+        Signal { name: "propertiesChanged"; lineNumber: 339 }
+        Signal { name: "readyChanged"; lineNumber: 340 }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 175
+        name: "qs::service::pipewire::PwNodeLinkTracker"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pipewire/PwNodeLinkTracker 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "node"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "node"
+            write: "setNode"
+            notify: "nodeChanged"
+            index: 0
+            lineNumber: 179
+        }
+        Property {
+            name: "linkGroups"
+            type: "qs::service::pipewire::PwLinkGroupIface"
+            isList: true
+            read: "linkGroups"
+            notify: "linkGroupsChanged"
+            index: 1
+            lineNumber: 184
+            isReadonly: true
+        }
+        Signal { name: "nodeChanged"; lineNumber: 197 }
+        Signal { name: "linkGroupsChanged"; lineNumber: 198 }
+        Method { name: "onNodeDestroyed"; lineNumber: 201 }
+        Method {
+            name: "onLinkGroupCreated"
+            lineNumber: 202
+            Parameter { name: "linkGroup"; type: "PwLinkGroup"; isPointer: true }
+        }
+        Method {
+            name: "onLinkGroupDestroyed"
+            lineNumber: 203
+            Parameter { name: "object"; type: "QObject"; isPointer: true }
+        }
+    }
+    Component {
+        file: "peak.hpp"
+        lineNumber: 21
+        name: "qs::service::pipewire::PwNodePeakMonitor"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pipewire/PwNodePeakMonitor 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "node"
+            type: "qs::service::pipewire::PwNodeIface"
+            isPointer: true
+            read: "node"
+            write: "setNode"
+            notify: "nodeChanged"
+            index: 0
+            lineNumber: 25
+        }
+        Property {
+            name: "enabled"
+            type: "bool"
+            read: "isEnabled"
+            write: "setEnabled"
+            notify: "enabledChanged"
+            index: 1
+            lineNumber: 27
+        }
+        Property {
+            name: "peaks"
+            type: "float"
+            isList: true
+            read: "peaks"
+            notify: "peaksChanged"
+            index: 2
+            lineNumber: 31
+            isReadonly: true
+        }
+        Property {
+            name: "peak"
+            type: "float"
+            read: "peak"
+            notify: "peakChanged"
+            index: 3
+            lineNumber: 33
+            isReadonly: true
+        }
+        Property {
+            name: "channels"
+            type: "qs::service::pipewire::PwAudioChannel::Enum"
+            isList: true
+            read: "channels"
+            notify: "channelsChanged"
+            index: 4
+            lineNumber: 35
+            isReadonly: true
+        }
+        Signal { name: "nodeChanged"; lineNumber: 55 }
+        Signal { name: "enabledChanged"; lineNumber: 56 }
+        Signal { name: "peaksChanged"; lineNumber: 57 }
+        Signal { name: "peakChanged"; lineNumber: 58 }
+        Signal { name: "channelsChanged"; lineNumber: 59 }
+        Method { name: "onNodeDestroyed"; lineNumber: 62 }
+    }
+    Component {
+        file: "node.hpp"
+        lineNumber: 93
+        name: "qs::service::pipewire::PwNodeType"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pipewire/PwNodeType 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Flag"
+            type: "quint8"
+            lineNumber: 99
+            values: [
+                "Untracked",
+                "Audio",
+                "Video",
+                "Stream",
+                "Source",
+                "Sink",
+                "AudioSink",
+                "AudioSource",
+                "AudioDuplex",
+                "AudioOutStream",
+                "AudioInStream",
+                "VideoSource",
+                "VideoSink"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 151
+            Parameter { name: "type"; type: "qs::service::pipewire::PwNodeType::Flags" }
+        }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 33
+        name: "qs::service::pipewire::PwObjectIface"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        Method { name: "onObjectDestroying"; lineNumber: 48 }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 437
+        name: "qs::service::pipewire::PwObjectTracker"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Pipewire/PwObjectTracker 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "objects"
+            type: "QObjectList"
+            read: "objects"
+            write: "setObjects"
+            notify: "objectsChanged"
+            index: 0
+            lineNumber: 440
+        }
+        Signal { name: "objectsChanged"; lineNumber: 452 }
+        Method {
+            name: "objectDestroyed"
+            lineNumber: 455
+            Parameter { name: "object"; type: "QObject"; isPointer: true }
+        }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Services.Polkit
+linktarget quickshell-service-polkitplugin
+optional plugin quickshell-service-polkitplugin
+classname Quickshell_Services_PolkitPlugin
+typeinfo quickshell-service-polkit.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Services/Polkit/
+depends QtQuick
+
@@ -0,0 +1,251 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "flow.hpp"
+        lineNumber: 14
+        name: "qs::service::polkit::AuthFlow"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.Polkit/AuthFlow 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "message"
+            type: "QString"
+            read: "message"
+            index: 0
+            lineNumber: 24
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "iconName"
+            type: "QString"
+            read: "iconName"
+            index: 1
+            lineNumber: 31
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "actionId"
+            type: "QString"
+            read: "actionId"
+            index: 2
+            lineNumber: 36
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "cookie"
+            type: "QString"
+            read: "cookie"
+            index: 3
+            lineNumber: 41
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "identities"
+            type: "QList<Identity*>"
+            read: "identities"
+            index: 4
+            lineNumber: 48
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "selectedIdentity"
+            type: "Identity"
+            isPointer: true
+            bindable: "selectedIdentity"
+            read: "default"
+            write: "setSelectedIdentity"
+            notify: "selectedIdentityChanged"
+            index: 5
+            lineNumber: 53
+        }
+        Property {
+            name: "isResponseRequired"
+            type: "bool"
+            bindable: "isResponseRequired"
+            read: "default"
+            notify: "isResponseRequiredChanged"
+            index: 6
+            lineNumber: 57
+            isReadonly: true
+        }
+        Property {
+            name: "inputPrompt"
+            type: "QString"
+            bindable: "inputPrompt"
+            read: "default"
+            notify: "inputPromptChanged"
+            index: 7
+            lineNumber: 60
+            isReadonly: true
+        }
+        Property {
+            name: "responseVisible"
+            type: "bool"
+            bindable: "responseVisible"
+            read: "default"
+            notify: "responseVisibleChanged"
+            index: 8
+            lineNumber: 63
+            isReadonly: true
+        }
+        Property {
+            name: "supplementaryMessage"
+            type: "QString"
+            bindable: "supplementaryMessage"
+            read: "default"
+            notify: "supplementaryMessageChanged"
+            index: 9
+            lineNumber: 69
+            isReadonly: true
+        }
+        Property {
+            name: "supplementaryIsError"
+            type: "bool"
+            bindable: "supplementaryIsError"
+            read: "default"
+            notify: "supplementaryIsErrorChanged"
+            index: 10
+            lineNumber: 72
+            isReadonly: true
+        }
+        Property {
+            name: "isCompleted"
+            type: "bool"
+            bindable: "isCompleted"
+            read: "default"
+            notify: "isCompletedChanged"
+            index: 11
+            lineNumber: 75
+            isReadonly: true
+        }
+        Property {
+            name: "isSuccessful"
+            type: "bool"
+            bindable: "isSuccessful"
+            read: "default"
+            notify: "isSuccessfulChanged"
+            index: 12
+            lineNumber: 78
+            isReadonly: true
+        }
+        Property {
+            name: "isCancelled"
+            type: "bool"
+            bindable: "isCancelled"
+            read: "default"
+            notify: "isCancelledChanged"
+            index: 13
+            lineNumber: 81
+            isReadonly: true
+        }
+        Property {
+            name: "failed"
+            type: "bool"
+            bindable: "failed"
+            read: "default"
+            notify: "failedChanged"
+            index: 14
+            lineNumber: 84
+            isReadonly: true
+        }
+        Signal { name: "authenticationSucceeded"; lineNumber: 124 }
+        Signal { name: "authenticationFailed"; lineNumber: 135 }
+        Signal { name: "authenticationRequestCancelled"; lineNumber: 138 }
+        Signal { name: "selectedIdentityChanged"; lineNumber: 140 }
+        Signal { name: "isResponseRequiredChanged"; lineNumber: 141 }
+        Signal { name: "inputPromptChanged"; lineNumber: 142 }
+        Signal { name: "responseVisibleChanged"; lineNumber: 143 }
+        Signal { name: "supplementaryMessageChanged"; lineNumber: 144 }
+        Signal { name: "supplementaryIsErrorChanged"; lineNumber: 145 }
+        Signal { name: "isCompletedChanged"; lineNumber: 146 }
+        Signal { name: "isSuccessfulChanged"; lineNumber: 147 }
+        Signal { name: "isCancelledChanged"; lineNumber: 148 }
+        Signal { name: "failedChanged"; lineNumber: 149 }
+        Method {
+            name: "request"
+            lineNumber: 153
+            Parameter { name: "message"; type: "QString" }
+            Parameter { name: "echo"; type: "bool" }
+        }
+        Method {
+            name: "completed"
+            lineNumber: 154
+            Parameter { name: "gainedAuthorization"; type: "bool" }
+        }
+        Method {
+            name: "showError"
+            lineNumber: 155
+            Parameter { name: "message"; type: "QString" }
+        }
+        Method {
+            name: "showInfo"
+            lineNumber: 156
+            Parameter { name: "message"; type: "QString" }
+        }
+        Method {
+            name: "submit"
+            lineNumber: 95
+            Parameter { name: "value"; type: "QString" }
+        }
+        Method { name: "cancelAuthenticationRequest"; lineNumber: 97 }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 25
+        name: "qs::service::polkit::PolkitAgent"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        interfaces: ["QQmlParserStatus"]
+        exports: ["Quickshell.Services.Polkit/PolkitAgent 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property { name: "path"; type: "QString"; read: "path"; write: "setPath"; index: 0; lineNumber: 36 }
+        Property {
+            name: "isRegistered"
+            type: "bool"
+            bindable: "isRegistered"
+            read: "default"
+            notify: "isRegisteredChanged"
+            index: 1
+            lineNumber: 39
+            isReadonly: true
+        }
+        Property {
+            name: "isActive"
+            type: "bool"
+            bindable: "isActive"
+            read: "default"
+            notify: "isActiveChanged"
+            index: 2
+            lineNumber: 45
+            isReadonly: true
+        }
+        Property {
+            name: "flow"
+            type: "AuthFlow"
+            isPointer: true
+            bindable: "flow"
+            read: "default"
+            notify: "flowChanged"
+            index: 3
+            lineNumber: 50
+            isReadonly: true
+        }
+        Signal { name: "authenticationRequestStarted"; lineNumber: 71 }
+        Signal { name: "isRegisteredChanged"; lineNumber: 73 }
+        Signal { name: "isActiveChanged"; lineNumber: 74 }
+        Signal { name: "flowChanged"; lineNumber: 75 }
+    }
+}
@@ -0,0 +1,11 @@
+module Quickshell.Services.SystemTray
+linktarget quickshell-service-statusnotifierplugin
+optional plugin quickshell-service-statusnotifierplugin
+classname Quickshell_Services_SystemTrayPlugin
+typeinfo quickshell-service-statusnotifier.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Services/SystemTray/
+depends Quickshell
+depends Quickshell.DBusMenu
+depends QtQuick
+
@@ -0,0 +1,211 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "qml.hpp"
+        lineNumber: 16
+        name: "SystemTray"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.SystemTray/SystemTray 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "items"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "items"
+            index: 0
+            lineNumber: 20
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Method {
+            name: "onItemRegistered"
+            lineNumber: 30
+            Parameter { name: "item"; type: "qs::service::sni::StatusNotifierItem"; isPointer: true }
+        }
+        Method {
+            name: "onItemUnregistered"
+            lineNumber: 31
+            Parameter { name: "item"; type: "qs::service::sni::StatusNotifierItem"; isPointer: true }
+        }
+    }
+    Component {
+        file: "item.hpp"
+        lineNumber: 43
+        name: "qs::service::sni::Category"
+        accessSemantics: "none"
+        exports: ["Quickshell.Services.SystemTray/Category 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 47
+            values: [
+                "Hardware",
+                "SystemServices",
+                "ApplicationStatus",
+                "Communications"
+            ]
+        }
+    }
+    Component {
+        file: "item.hpp"
+        lineNumber: 26
+        name: "qs::service::sni::Status"
+        accessSemantics: "none"
+        exports: ["Quickshell.Services.SystemTray/Status 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 30
+            values: ["Passive", "Active", "NeedsAttention"]
+        }
+    }
+    Component {
+        file: "item.hpp"
+        lineNumber: 100
+        name: "qs::service::sni::StatusNotifierItem"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.SystemTray/SystemTrayItem 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "id"
+            type: "QString"
+            bindable: "bindableId"
+            read: "default"
+            notify: "idChanged"
+            index: 0
+            lineNumber: 105
+            isReadonly: true
+        }
+        Property {
+            name: "title"
+            type: "QString"
+            bindable: "bindableTitle"
+            read: "default"
+            notify: "titleChanged"
+            index: 1
+            lineNumber: 107
+            isReadonly: true
+        }
+        Property {
+            name: "status"
+            type: "qs::service::sni::Status::Enum"
+            bindable: "bindableStatus"
+            read: "default"
+            notify: "statusChanged"
+            index: 2
+            lineNumber: 108
+            isReadonly: true
+        }
+        Property {
+            name: "category"
+            type: "qs::service::sni::Category::Enum"
+            bindable: "bindableCategory"
+            read: "default"
+            notify: "categoryChanged"
+            index: 3
+            lineNumber: 109
+            isReadonly: true
+        }
+        Property {
+            name: "icon"
+            type: "QString"
+            bindable: "bindableIcon"
+            read: "default"
+            notify: "iconChanged"
+            index: 4
+            lineNumber: 111
+            isReadonly: true
+        }
+        Property {
+            name: "tooltipTitle"
+            type: "QString"
+            read: "tooltipTitle"
+            notify: "tooltipTitleChanged"
+            index: 5
+            lineNumber: 112
+            isReadonly: true
+        }
+        Property {
+            name: "tooltipDescription"
+            type: "QString"
+            read: "tooltipDescription"
+            notify: "tooltipDescriptionChanged"
+            index: 6
+            lineNumber: 113
+            isReadonly: true
+        }
+        Property {
+            name: "hasMenu"
+            type: "bool"
+            bindable: "bindableHasMenu"
+            read: "default"
+            notify: "hasMenuChanged"
+            index: 7
+            lineNumber: 115
+            isReadonly: true
+        }
+        Property {
+            name: "menu"
+            type: "qs::dbus::dbusmenu::DBusMenuHandle"
+            isPointer: true
+            read: "menuHandle"
+            notify: "hasMenuChanged"
+            index: 8
+            lineNumber: 119
+            isReadonly: true
+        }
+        Property {
+            name: "onlyMenu"
+            type: "bool"
+            bindable: "bindableOnlyMenu"
+            read: "default"
+            notify: "onlyMenuChanged"
+            index: 9
+            lineNumber: 121
+            isReadonly: true
+        }
+        Signal { name: "ready"; lineNumber: 155 }
+        Signal { name: "idChanged"; lineNumber: 157 }
+        Signal { name: "titleChanged"; lineNumber: 158 }
+        Signal { name: "iconChanged"; lineNumber: 159 }
+        Signal { name: "statusChanged"; lineNumber: 160 }
+        Signal { name: "categoryChanged"; lineNumber: 161 }
+        Signal { name: "tooltipTitleChanged"; lineNumber: 162 }
+        Signal { name: "tooltipDescriptionChanged"; lineNumber: 163 }
+        Signal { name: "hasMenuChanged"; lineNumber: 164 }
+        Signal { name: "onlyMenuChanged"; lineNumber: 165 }
+        Method { name: "onGetAllFinished"; lineNumber: 168 }
+        Method { name: "onGetAllFailed"; isMethodConstant: true; lineNumber: 169 }
+        Method { name: "activate"; lineNumber: 130 }
+        Method { name: "secondaryActivate"; lineNumber: 132 }
+        Method {
+            name: "scroll"
+            isMethodConstant: true
+            lineNumber: 134
+            Parameter { name: "delta"; type: "int" }
+            Parameter { name: "horizontal"; type: "bool" }
+        }
+        Method {
+            name: "display"
+            lineNumber: 136
+            Parameter { name: "parentWindow"; type: "QObject"; isPointer: true }
+            Parameter { name: "relativeX"; type: "int" }
+            Parameter { name: "relativeY"; type: "int" }
+        }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Services.UPower
+linktarget quickshell-service-upowerplugin
+optional plugin quickshell-service-upowerplugin
+classname Quickshell_Services_UPowerPlugin
+typeinfo quickshell-service-upower.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Services/UPower/
+depends Quickshell
+
@@ -0,0 +1,461 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "powerprofiles.hpp"
+        lineNumber: 42
+        name: "qs::service::upower::PerformanceDegradationReason"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: [
+            "Quickshell.Services.UPower/PerformanceDegradationReason 0.0"
+        ]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 48
+            values: ["None", "LapDetected", "HighTemperature"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 60
+            Parameter { name: "reason"; type: "qs::service::upower::PerformanceDegradationReason::Enum" }
+        }
+    }
+    Component {
+        file: "powerprofiles.hpp"
+        lineNumber: 20
+        name: "qs::service::upower::PowerProfile"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.UPower/PowerProfile 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 26
+            values: ["PowerSaver", "Balanced", "Performance"]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 37
+            Parameter { name: "profile"; type: "qs::service::upower::PowerProfile::Enum" }
+        }
+    }
+    Component {
+        file: "powerprofiles.hpp"
+        lineNumber: 104
+        name: "qs::service::upower::PowerProfileHold"
+        accessSemantics: "value"
+        exports: ["Quickshell.Services.UPower/powerProfileHold 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "profile"
+            type: "qs::service::upower::PowerProfile::Enum"
+            index: 0
+            lineNumber: 107
+            isPropertyConstant: true
+        }
+        Property {
+            name: "applicationId"
+            type: "QString"
+            index: 1
+            lineNumber: 108
+            isPropertyConstant: true
+        }
+        Property { name: "reason"; type: "QString"; index: 2; lineNumber: 109; isPropertyConstant: true }
+    }
+    Component {
+        file: "powerprofiles.hpp"
+        lineNumber: 167
+        name: "qs::service::upower::PowerProfilesQml"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.UPower/PowerProfiles 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "profile"
+            type: "qs::service::upower::PowerProfile::Enum"
+            bindable: "bindableProfile"
+            read: "default"
+            write: "setProfile"
+            notify: "profileChanged"
+            index: 0
+            lineNumber: 176
+        }
+        Property {
+            name: "hasPerformanceProfile"
+            type: "bool"
+            bindable: "bindableHasPerformanceProfile"
+            read: "default"
+            notify: "hasPerformanceProfileChanged"
+            index: 1
+            lineNumber: 181
+            isReadonly: true
+        }
+        Property {
+            name: "degradationReason"
+            type: "qs::service::upower::PerformanceDegradationReason::Enum"
+            bindable: "bindableDegradationReason"
+            read: "default"
+            notify: "degradationReasonChanged"
+            index: 2
+            lineNumber: 184
+            isReadonly: true
+        }
+        Property {
+            name: "holds"
+            type: "qs::service::upower::PowerProfileHold"
+            isList: true
+            bindable: "bindableHolds"
+            read: "default"
+            notify: "holdsChanged"
+            index: 3
+            lineNumber: 200
+            isReadonly: true
+        }
+        Signal { name: "profileChanged"; lineNumber: 204 }
+        Signal { name: "hasPerformanceProfileChanged"; lineNumber: 205 }
+        Signal { name: "degradationReasonChanged"; lineNumber: 206 }
+        Signal { name: "holdsChanged"; lineNumber: 207 }
+    }
+    Component {
+        file: "device.hpp"
+        lineNumber: 115
+        name: "qs::service::upower::UPowerDevice"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.UPower/UPowerDevice 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "type"
+            type: "qs::service::upower::UPowerDeviceType::Enum"
+            bindable: "bindableType"
+            read: "default"
+            notify: "typeChanged"
+            index: 0
+            lineNumber: 119
+            isReadonly: true
+        }
+        Property {
+            name: "powerSupply"
+            type: "bool"
+            bindable: "bindablePowerSupply"
+            read: "default"
+            notify: "powerSupplyChanged"
+            index: 1
+            lineNumber: 121
+            isReadonly: true
+        }
+        Property {
+            name: "energy"
+            type: "double"
+            bindable: "bindableEnergy"
+            read: "default"
+            notify: "energyChanged"
+            index: 2
+            lineNumber: 123
+            isReadonly: true
+        }
+        Property {
+            name: "energyCapacity"
+            type: "double"
+            bindable: "bindableEnergyCapacity"
+            read: "default"
+            notify: "energyCapacityChanged"
+            index: 3
+            lineNumber: 125
+            isReadonly: true
+        }
+        Property {
+            name: "changeRate"
+            type: "double"
+            bindable: "bindableChangeRate"
+            read: "default"
+            notify: "changeRateChanged"
+            index: 4
+            lineNumber: 127
+            isReadonly: true
+        }
+        Property {
+            name: "timeToEmpty"
+            type: "double"
+            bindable: "bindableTimeToEmpty"
+            read: "default"
+            notify: "timeToEmptyChanged"
+            index: 5
+            lineNumber: 131
+            isReadonly: true
+        }
+        Property {
+            name: "timeToFull"
+            type: "double"
+            bindable: "bindableTimeToFull"
+            read: "default"
+            notify: "timeToFullChanged"
+            index: 6
+            lineNumber: 135
+            isReadonly: true
+        }
+        Property {
+            name: "percentage"
+            type: "double"
+            bindable: "bindablePercentage"
+            read: "default"
+            notify: "percentageChanged"
+            index: 7
+            lineNumber: 139
+            isReadonly: true
+        }
+        Property {
+            name: "isPresent"
+            type: "bool"
+            bindable: "bindableIsPresent"
+            read: "default"
+            notify: "isPresentChanged"
+            index: 8
+            lineNumber: 143
+            isReadonly: true
+        }
+        Property {
+            name: "state"
+            type: "qs::service::upower::UPowerDeviceState::Enum"
+            bindable: "bindableState"
+            read: "default"
+            notify: "stateChanged"
+            index: 9
+            lineNumber: 145
+            isReadonly: true
+        }
+        Property {
+            name: "healthPercentage"
+            type: "double"
+            bindable: "bindableHealthPercentage"
+            read: "default"
+            notify: "healthPercentageChanged"
+            index: 10
+            lineNumber: 147
+            isReadonly: true
+        }
+        Property {
+            name: "healthSupported"
+            type: "bool"
+            bindable: "bindableHealthSupported"
+            read: "default"
+            notify: "healthSupportedChanged"
+            index: 11
+            lineNumber: 148
+            isReadonly: true
+        }
+        Property {
+            name: "iconName"
+            type: "QString"
+            bindable: "bindableIconName"
+            read: "default"
+            notify: "iconNameChanged"
+            index: 12
+            lineNumber: 150
+            isReadonly: true
+        }
+        Property {
+            name: "isLaptopBattery"
+            type: "bool"
+            bindable: "bindableIsLaptopBattery"
+            read: "default"
+            notify: "isLaptopBatteryChanged"
+            index: 13
+            lineNumber: 154
+            isReadonly: true
+        }
+        Property {
+            name: "nativePath"
+            type: "QString"
+            bindable: "bindableNativePath"
+            read: "default"
+            notify: "nativePathChanged"
+            index: 14
+            lineNumber: 156
+            isReadonly: true
+        }
+        Property {
+            name: "model"
+            type: "QString"
+            bindable: "bindableModel"
+            read: "default"
+            notify: "modelChanged"
+            index: 15
+            lineNumber: 158
+            isReadonly: true
+        }
+        Property {
+            name: "ready"
+            type: "bool"
+            bindable: "bindableReady"
+            read: "default"
+            notify: "readyChanged"
+            index: 16
+            lineNumber: 162
+            isReadonly: true
+        }
+        Signal { name: "readyChanged"; lineNumber: 197 }
+        Signal { name: "typeChanged"; lineNumber: 199 }
+        Signal { name: "powerSupplyChanged"; lineNumber: 200 }
+        Signal { name: "energyChanged"; lineNumber: 201 }
+        Signal { name: "energyCapacityChanged"; lineNumber: 202 }
+        Signal { name: "changeRateChanged"; lineNumber: 203 }
+        Signal { name: "timeToEmptyChanged"; lineNumber: 204 }
+        Signal { name: "timeToFullChanged"; lineNumber: 205 }
+        Signal { name: "percentageChanged"; lineNumber: 206 }
+        Signal { name: "isPresentChanged"; lineNumber: 207 }
+        Signal { name: "stateChanged"; lineNumber: 208 }
+        Signal { name: "healthPercentageChanged"; lineNumber: 209 }
+        Signal { name: "healthSupportedChanged"; lineNumber: 210 }
+        Signal { name: "iconNameChanged"; lineNumber: 211 }
+        Signal { name: "isLaptopBatteryChanged"; lineNumber: 212 }
+        Signal { name: "nativePathChanged"; lineNumber: 213 }
+        Signal { name: "modelChanged"; lineNumber: 214 }
+        Method { name: "onGetAllFinished"; lineNumber: 217 }
+    }
+    Component {
+        file: "device.hpp"
+        lineNumber: 17
+        name: "qs::service::upower::UPowerDeviceState"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.UPower/UPowerDeviceState 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 23
+            values: [
+                "Unknown",
+                "Charging",
+                "Discharging",
+                "Empty",
+                "FullyCharged",
+                "PendingCharge",
+                "PendingDischarge"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 36
+            Parameter { name: "status"; type: "qs::service::upower::UPowerDeviceState::Enum" }
+        }
+    }
+    Component {
+        file: "device.hpp"
+        lineNumber: 41
+        name: "qs::service::upower::UPowerDeviceType"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.UPower/UPowerDeviceType 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 47
+            values: [
+                "Unknown",
+                "LinePower",
+                "Battery",
+                "Ups",
+                "Monitor",
+                "Mouse",
+                "Keyboard",
+                "Pda",
+                "Phone",
+                "MediaPlayer",
+                "Tablet",
+                "Computer",
+                "GamingInput",
+                "Pen",
+                "Touchpad",
+                "Modem",
+                "Network",
+                "Headset",
+                "Speakers",
+                "Headphones",
+                "Video",
+                "OtherAudio",
+                "RemoteControl",
+                "Printer",
+                "Scanner",
+                "Camera",
+                "Wearable",
+                "Toy",
+                "BluetoothGeneric"
+            ]
+        }
+        Method {
+            name: "toString"
+            type: "QString"
+            lineNumber: 80
+            Parameter { name: "type"; type: "qs::service::upower::UPowerDeviceType::Enum" }
+        }
+    }
+    Component {
+        file: "core.hpp"
+        lineNumber: 65
+        name: "qs::service::upower::UPowerQml"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Services.UPower/UPower 0.0"]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "displayDevice"
+            type: "qs::service::upower::UPowerDevice"
+            isPointer: true
+            read: "displayDevice"
+            index: 0
+            lineNumber: 75
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "devices"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "devices"
+            index: 1
+            lineNumber: 78
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "onBattery"
+            type: "bool"
+            bindable: "bindableOnBattery"
+            read: "default"
+            notify: "onBatteryChanged"
+            index: 2
+            lineNumber: 80
+            isReadonly: true
+        }
+        Signal { name: "onBatteryChanged"; lineNumber: 94 }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Wayland._BackgroundEffect
+linktarget quickshell-wayland-background-effectplugin
+optional plugin quickshell-wayland-background-effectplugin
+classname Quickshell_Wayland__BackgroundEffectPlugin
+typeinfo quickshell-wayland-background-effect.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Wayland/_BackgroundEffect/
+depends QtQuick
+
@@ -0,0 +1,40 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "qml.hpp"
+        lineNumber: 36
+        name: "qs::wayland::background_effect::BackgroundEffect"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Wayland._BackgroundEffect/BackgroundEffect 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        attachedType: "qs::wayland::background_effect::BackgroundEffect"
+        Property {
+            name: "blurRegion"
+            type: "PendingRegion"
+            isPointer: true
+            read: "blurRegion"
+            write: "setBlurRegion"
+            notify: "blurRegionChanged"
+            index: 0
+            lineNumber: 40
+        }
+        Signal { name: "blurRegionChanged"; lineNumber: 57 }
+        Method { name: "onWindowConnected"; lineNumber: 60 }
+        Method { name: "onWindowVisibleChanged"; lineNumber: 61 }
+        Method { name: "onWaylandWindowDestroyed"; lineNumber: 62 }
+        Method { name: "onWaylandSurfaceCreated"; lineNumber: 63 }
+        Method { name: "onWaylandSurfaceDestroyed"; lineNumber: 64 }
+        Method { name: "onProxyWindowDestroyed"; lineNumber: 65 }
+        Method { name: "onBlurRegionDestroyed"; lineNumber: 66 }
+        Method { name: "onWindowPolished"; lineNumber: 67 }
+        Method { name: "updateBlurRegion"; lineNumber: 68 }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Wayland._IdleInhibitor
+linktarget quickshell-wayland-idle-inhibitplugin
+optional plugin quickshell-wayland-idle-inhibitplugin
+classname Quickshell_Wayland__IdleInhibitorPlugin
+typeinfo quickshell-wayland-idle-inhibit.qmltypes
+depends QtQuick
+prefer :/qt/qml/Quickshell/Wayland/_IdleInhibitor/
+depends Quickshell
+
@@ -0,0 +1,45 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "inhibitor.hpp"
+        lineNumber: 27
+        name: "qs::wayland::idle_inhibit::IdleInhibitor"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Wayland._IdleInhibitor/IdleInhibitor 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "enabled"
+            type: "bool"
+            bindable: "bindableEnabled"
+            read: "default"
+            write: "default"
+            notify: "enabledChanged"
+            index: 0
+            lineNumber: 32
+        }
+        Property {
+            name: "window"
+            type: "QObject"
+            isPointer: true
+            read: "window"
+            write: "setWindow"
+            notify: "windowChanged"
+            index: 1
+            lineNumber: 37
+        }
+        Signal { name: "enabledChanged"; lineNumber: 51 }
+        Signal { name: "windowChanged"; lineNumber: 52 }
+        Method { name: "onWindowDestroyed"; lineNumber: 55 }
+        Method { name: "onWindowVisibilityChanged"; lineNumber: 56 }
+        Method { name: "onWaylandWindowDestroyed"; lineNumber: 57 }
+        Method { name: "onWaylandSurfaceCreated"; lineNumber: 58 }
+        Method { name: "onWaylandSurfaceDestroyed"; lineNumber: 59 }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Wayland._IdleNotify
+linktarget quickshell-wayland-idle-notifyplugin
+optional plugin quickshell-wayland-idle-notifyplugin
+classname Quickshell_Wayland__IdleNotifyPlugin
+typeinfo quickshell-wayland-idle-notify.qmltypes
+depends QtQuick
+prefer :/qt/qml/Quickshell/Wayland/_IdleNotify/
+depends Quickshell
+
@@ -0,0 +1,61 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "monitor.hpp"
+        lineNumber: 21
+        name: "qs::wayland::idle_notify::IdleMonitor"
+        accessSemantics: "reference"
+        prototype: "PostReloadHook"
+        exports: ["Quickshell.Wayland._IdleNotify/IdleMonitor 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "enabled"
+            type: "bool"
+            read: "isEnabled"
+            write: "setEnabled"
+            notify: "enabledChanged"
+            index: 0
+            lineNumber: 26
+        }
+        Property {
+            name: "timeout"
+            type: "double"
+            bindable: "bindableTimeout"
+            read: "default"
+            write: "default"
+            notify: "timeoutChanged"
+            index: 1
+            lineNumber: 30
+        }
+        Property {
+            name: "respectInhibitors"
+            type: "bool"
+            bindable: "bindableRespectInhibitors"
+            read: "default"
+            write: "default"
+            notify: "respectInhibitorsChanged"
+            index: 2
+            lineNumber: 33
+        }
+        Property {
+            name: "isIdle"
+            type: "bool"
+            bindable: "bindableIsIdle"
+            read: "default"
+            notify: "isIdleChanged"
+            index: 3
+            lineNumber: 36
+            isReadonly: true
+        }
+        Signal { name: "enabledChanged"; lineNumber: 54 }
+        Signal { name: "timeoutChanged"; lineNumber: 55 }
+        Signal { name: "respectInhibitorsChanged"; lineNumber: 56 }
+        Signal { name: "isIdleChanged"; lineNumber: 57 }
+    }
+}
@@ -0,0 +1,8 @@
+module Quickshell.Wayland._Screencopy
+linktarget quickshell-wayland-screencopyplugin
+optional plugin quickshell-wayland-screencopyplugin
+classname Quickshell_Wayland__ScreencopyPlugin
+typeinfo quickshell-wayland-screencopy.qmltypes
+depends QtQuick
+prefer :/qt/qml/Quickshell/Wayland/_Screencopy/
+
@@ -0,0 +1,90 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "view.hpp"
+        lineNumber: 17
+        name: "qs::wayland::screencopy::ScreencopyView"
+        accessSemantics: "reference"
+        defaultProperty: "data"
+        parentProperty: "parent"
+        prototype: "QQuickItem"
+        exports: ["Quickshell.Wayland._Screencopy/ScreencopyView 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "captureSource"
+            type: "QObject"
+            isPointer: true
+            read: "captureSource"
+            write: "setCaptureSource"
+            notify: "captureSourceChanged"
+            index: 0
+            lineNumber: 28
+        }
+        Property {
+            name: "paintCursor"
+            type: "bool"
+            read: "paintCursors"
+            write: "setPaintCursors"
+            notify: "paintCursorsChanged"
+            index: 1
+            lineNumber: 30
+        }
+        Property {
+            name: "live"
+            type: "bool"
+            read: "live"
+            write: "setLive"
+            notify: "liveChanged"
+            index: 2
+            lineNumber: 33
+        }
+        Property {
+            name: "hasContent"
+            type: "bool"
+            bindable: "bindableHasContent"
+            read: "default"
+            notify: "hasContentChanged"
+            index: 3
+            lineNumber: 36
+            isReadonly: true
+        }
+        Property {
+            name: "sourceSize"
+            type: "QSize"
+            bindable: "bindableSourceSize"
+            read: "default"
+            notify: "sourceSizeChanged"
+            index: 4
+            lineNumber: 38
+            isReadonly: true
+        }
+        Property {
+            name: "constraintSize"
+            type: "QSizeF"
+            bindable: "bindableConstraintSize"
+            read: "default"
+            write: "default"
+            notify: "constraintSizeChanged"
+            index: 5
+            lineNumber: 41
+        }
+        Signal { name: "stopped"; lineNumber: 67 }
+        Signal { name: "captureSourceChanged"; lineNumber: 69 }
+        Signal { name: "paintCursorsChanged"; lineNumber: 70 }
+        Signal { name: "liveChanged"; lineNumber: 71 }
+        Signal { name: "hasContentChanged"; lineNumber: 72 }
+        Signal { name: "sourceSizeChanged"; lineNumber: 73 }
+        Signal { name: "constraintSizeChanged"; lineNumber: 74 }
+        Method { name: "onCaptureSourceDestroyed"; lineNumber: 80 }
+        Method { name: "onFrameCaptured"; lineNumber: 81 }
+        Method { name: "destroyContextWithUpdate"; lineNumber: 82 }
+        Method { name: "onBuffersReady"; lineNumber: 83 }
+        Method { name: "captureFrame"; lineNumber: 50 }
+    }
+}
@@ -0,0 +1,9 @@
+module Quickshell.Wayland._ShortcutsInhibitor
+linktarget quickshell-wayland-shortcuts-inhibitplugin
+optional plugin quickshell-wayland-shortcuts-inhibitplugin
+classname Quickshell_Wayland__ShortcutsInhibitorPlugin
+typeinfo quickshell-wayland-shortcuts-inhibit.qmltypes
+depends QtQuick
+prefer :/qt/qml/Quickshell/Wayland/_ShortcutsInhibitor/
+depends Quickshell
+
@@ -0,0 +1,61 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "inhibitor.hpp"
+        lineNumber: 26
+        name: "qs::wayland::shortcuts_inhibit::ShortcutInhibitor"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: [
+            "Quickshell.Wayland._ShortcutsInhibitor/ShortcutInhibitor 0.0"
+        ]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "enabled"
+            type: "bool"
+            bindable: "bindableEnabled"
+            read: "default"
+            write: "default"
+            notify: "enabledChanged"
+            index: 0
+            lineNumber: 31
+        }
+        Property {
+            name: "window"
+            type: "QObject"
+            isPointer: true
+            bindable: "bindableWindow"
+            read: "default"
+            write: "default"
+            notify: "windowChanged"
+            index: 1
+            lineNumber: 36
+        }
+        Property {
+            name: "active"
+            type: "bool"
+            bindable: "bindableActive"
+            read: "default"
+            notify: "activeChanged"
+            index: 2
+            lineNumber: 43
+            isReadonly: true
+        }
+        Signal { name: "enabledChanged"; lineNumber: 56 }
+        Signal { name: "windowChanged"; lineNumber: 57 }
+        Signal { name: "activeChanged"; lineNumber: 58 }
+        Signal { name: "cancelled"; lineNumber: 60 }
+        Method { name: "onWindowDestroyed"; lineNumber: 63 }
+        Method { name: "onWindowVisibilityChanged"; lineNumber: 64 }
+        Method { name: "onWaylandWindowDestroyed"; lineNumber: 65 }
+        Method { name: "onWaylandSurfaceCreated"; lineNumber: 66 }
+        Method { name: "onWaylandSurfaceDestroyed"; lineNumber: 67 }
+        Method { name: "onInhibitorActiveChanged"; lineNumber: 68 }
+    }
+}
@@ -0,0 +1,11 @@
+module Quickshell.Wayland._ToplevelManagement
+linktarget quickshell-wayland-toplevel-managementplugin
+optional plugin quickshell-wayland-toplevel-managementplugin
+classname Quickshell_Wayland__ToplevelManagementPlugin
+typeinfo quickshell-wayland-toplevel-management.qmltypes
+depends QtQml
+prefer :/qt/qml/Quickshell/Wayland/_ToplevelManagement/
+depends Quickshell
+depends Quickshell.Wayland
+depends QtQuick
+
@@ -0,0 +1,152 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "qml.hpp"
+        lineNumber: 24
+        name: "qs::wayland::toplevel::Toplevel"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: ["Quickshell.Wayland._ToplevelManagement/Toplevel 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "appId"
+            type: "QString"
+            read: "appId"
+            notify: "appIdChanged"
+            index: 0
+            lineNumber: 26
+            isReadonly: true
+        }
+        Property {
+            name: "title"
+            type: "QString"
+            read: "title"
+            notify: "titleChanged"
+            index: 1
+            lineNumber: 27
+            isReadonly: true
+        }
+        Property {
+            name: "parent"
+            type: "qs::wayland::toplevel::Toplevel"
+            isPointer: true
+            read: "parent"
+            notify: "parentChanged"
+            index: 2
+            lineNumber: 29
+            isReadonly: true
+        }
+        Property {
+            name: "activated"
+            type: "bool"
+            read: "activated"
+            notify: "activatedChanged"
+            index: 3
+            lineNumber: 33
+            isReadonly: true
+        }
+        Property {
+            name: "screens"
+            type: "QList<QuickshellScreenInfo*>"
+            read: "screens"
+            notify: "screensChanged"
+            index: 4
+            lineNumber: 38
+            isReadonly: true
+        }
+        Property {
+            name: "maximized"
+            type: "bool"
+            read: "maximized"
+            write: "setMaximized"
+            notify: "maximizedChanged"
+            index: 5
+            lineNumber: 43
+        }
+        Property {
+            name: "minimized"
+            type: "bool"
+            read: "minimized"
+            write: "setMinimized"
+            notify: "minimizedChanged"
+            index: 6
+            lineNumber: 48
+        }
+        Property {
+            name: "fullscreen"
+            type: "bool"
+            read: "fullscreen"
+            write: "setFullscreen"
+            notify: "fullscreenChanged"
+            index: 7
+            lineNumber: 54
+        }
+        Signal { name: "closed"; lineNumber: 97 }
+        Signal { name: "appIdChanged"; lineNumber: 98 }
+        Signal { name: "titleChanged"; lineNumber: 99 }
+        Signal { name: "parentChanged"; lineNumber: 100 }
+        Signal { name: "activatedChanged"; lineNumber: 101 }
+        Signal { name: "screensChanged"; lineNumber: 102 }
+        Signal { name: "maximizedChanged"; lineNumber: 103 }
+        Signal { name: "minimizedChanged"; lineNumber: 104 }
+        Signal { name: "fullscreenChanged"; lineNumber: 105 }
+        Method { name: "onClosed"; lineNumber: 108 }
+        Method { name: "onRectangleProxyConnected"; lineNumber: 109 }
+        Method { name: "onRectangleProxyDestroyed"; lineNumber: 110 }
+        Method { name: "activate"; lineNumber: 63 }
+        Method { name: "close"; lineNumber: 67 }
+        Method {
+            name: "fullscreenOn"
+            lineNumber: 71
+            Parameter { name: "screen"; type: "QuickshellScreenInfo"; isPointer: true }
+        }
+        Method {
+            name: "setRectangle"
+            lineNumber: 76
+            Parameter { name: "window"; type: "QObject"; isPointer: true }
+            Parameter { name: "rect"; type: "QRect" }
+        }
+        Method { name: "unsetRectangle"; lineNumber: 77 }
+    }
+    Component {
+        file: "qml.hpp"
+        lineNumber: 157
+        name: "qs::wayland::toplevel::ToplevelManagerQml"
+        accessSemantics: "reference"
+        prototype: "QObject"
+        exports: [
+            "Quickshell.Wayland._ToplevelManagement/ToplevelManager 0.0"
+        ]
+        isCreatable: false
+        isSingleton: true
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "toplevels"
+            type: "UntypedObjectModel"
+            isPointer: true
+            read: "toplevels"
+            index: 0
+            lineNumber: 162
+            isReadonly: true
+            isPropertyConstant: true
+        }
+        Property {
+            name: "activeToplevel"
+            type: "qs::wayland::toplevel::Toplevel"
+            isPointer: true
+            read: "activeToplevel"
+            notify: "activeToplevelChanged"
+            index: 1
+            lineNumber: 167
+            isReadonly: true
+        }
+        Signal { name: "activeToplevelChanged"; lineNumber: 179 }
+    }
+}
@@ -0,0 +1,10 @@
+module Quickshell.Wayland._WlrLayerShell
+linktarget quickshell-wayland-layershellplugin
+optional plugin quickshell-wayland-layershellplugin
+classname Quickshell_Wayland__WlrLayerShellPlugin
+typeinfo quickshell-wayland-layershell.qmltypes
+depends QtQuick
+prefer :/qt/qml/Quickshell/Wayland/_WlrLayerShell/
+depends Quickshell
+depends Quickshell.Wayland
+
@@ -0,0 +1,139 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "wlr_layershell.hpp"
+        lineNumber: 47
+        name: "qs::wayland::layershell::WlrKeyboardFocus"
+        accessSemantics: "none"
+        exports: ["Quickshell.Wayland._WlrLayerShell/WlrKeyboardFocus 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 51
+            values: ["None", "Exclusive", "OnDemand"]
+        }
+    }
+    Component {
+        file: "wlr_layershell.hpp"
+        lineNumber: 26
+        name: "qs::wayland::layershell::WlrLayer"
+        accessSemantics: "none"
+        exports: ["Quickshell.Wayland._WlrLayerShell/WlrLayer 0.0"]
+        isCreatable: false
+        exportMetaObjectRevisions: [0]
+        Enum {
+            name: "Enum"
+            type: "quint8"
+            lineNumber: 30
+            values: ["Background", "Bottom", "Top", "Overlay"]
+        }
+    }
+    Component {
+        file: "wlr_layershell.hpp"
+        lineNumber: 97
+        name: "qs::wayland::layershell::WlrLayershell"
+        accessSemantics: "reference"
+        prototype: "ProxyWindowBase"
+        exports: ["Quickshell.Wayland._WlrLayerShell/WlrLayershell 0.0"]
+        exportMetaObjectRevisions: [0]
+        attachedType: "qs::wayland::layershell::WlrLayershell"
+        Property {
+            name: "layer"
+            type: "qs::wayland::layershell::WlrLayer::Enum"
+            read: "layer"
+            write: "setLayer"
+            notify: "layerChanged"
+            index: 0
+            lineNumber: 102
+        }
+        Property {
+            name: "namespace"
+            type: "QString"
+            read: "ns"
+            write: "setNamespace"
+            notify: "namespaceChanged"
+            index: 1
+            lineNumber: 106
+        }
+        Property {
+            name: "keyboardFocus"
+            type: "qs::wayland::layershell::WlrKeyboardFocus::Enum"
+            read: "keyboardFocus"
+            write: "setKeyboardFocus"
+            notify: "keyboardFocusChanged"
+            index: 2
+            lineNumber: 108
+        }
+        Property {
+            name: "anchors"
+            type: "Anchors"
+            read: "anchors"
+            write: "setAnchors"
+            notify: "anchorsChanged"
+            index: 3
+            lineNumber: 110
+        }
+        Property {
+            name: "exclusiveZone"
+            type: "int"
+            read: "exclusiveZone"
+            write: "setExclusiveZone"
+            notify: "exclusiveZoneChanged"
+            index: 4
+            lineNumber: 111
+        }
+        Property {
+            name: "exclusionMode"
+            type: "ExclusionMode::Enum"
+            read: "exclusionMode"
+            write: "setExclusionMode"
+            notify: "exclusionModeChanged"
+            index: 5
+            lineNumber: 112
+        }
+        Property {
+            name: "margins"
+            type: "Margins"
+            read: "margins"
+            write: "setMargins"
+            notify: "marginsChanged"
+            index: 6
+            lineNumber: 113
+        }
+        Property {
+            name: "aboveWindows"
+            type: "bool"
+            read: "aboveWindows"
+            write: "setAboveWindows"
+            notify: "layerChanged"
+            index: 7
+            lineNumber: 114
+        }
+        Property {
+            name: "focusable"
+            type: "bool"
+            read: "focusable"
+            write: "setFocusable"
+            notify: "keyboardFocusChanged"
+            index: 8
+            lineNumber: 115
+        }
+        Signal { name: "layerChanged"; lineNumber: 170 }
+        Signal { name: "namespaceChanged"; lineNumber: 171 }
+        Signal { name: "keyboardFocusChanged"; lineNumber: 172 }
+        Signal { name: "anchorsChanged"; lineNumber: 173 }
+        Signal { name: "exclusiveZoneChanged"; lineNumber: 174 }
+        Signal { name: "exclusionModeChanged"; lineNumber: 175 }
+        Signal { name: "marginsChanged"; lineNumber: 176 }
+        Method { name: "updateAutoExclusion"; lineNumber: 179 }
+        Method { name: "onBridgeDestroyed"; lineNumber: 180 }
+    }
+}
@@ -0,0 +1,16 @@
+module Quickshell.Wayland
+linktarget quickshell-waylandplugin
+optional plugin quickshell-waylandplugin
+classname Quickshell_WaylandPlugin
+typeinfo quickshell-wayland.qmltypes
+import Quickshell.Wayland._WlrLayerShell
+import Quickshell.Wayland._ToplevelManagement
+import Quickshell.Wayland._Screencopy
+import Quickshell.Wayland._BackgroundEffect
+import Quickshell.Wayland._IdleInhibitor
+import Quickshell.Wayland._IdleNotify
+import Quickshell.Wayland._ShortcutsInhibitor
+depends QtQuick
+prefer :/qt/qml/Quickshell/Wayland/
+depends Quickshell
+
@@ -0,0 +1,134 @@
+import QtQuick.tooling 1.2
+
+// This file describes the plugin-supplied types contained in the library.
+// It is used for QML tooling purposes only.
+//
+// This file was auto-generated by qmltyperegistrar.
+
+Module {
+    Component {
+        file: "session_lock.hpp"
+        lineNumber: 56
+        name: "WlSessionLock"
+        accessSemantics: "reference"
+        defaultProperty: "surface"
+        prototype: "Reloadable"
+        exports: ["Quickshell.Wayland/WlSessionLock 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "locked"
+            type: "bool"
+            read: "isLocked"
+            write: "setLocked"
+            notify: "lockStateChanged"
+            index: 0
+            lineNumber: 63
+        }
+        Property {
+            name: "secure"
+            type: "bool"
+            read: "isSecure"
+            notify: "secureStateChanged"
+            index: 1
+            lineNumber: 67
+            isReadonly: true
+        }
+        Property {
+            name: "surface"
+            type: "QQmlComponent"
+            isPointer: true
+            read: "surfaceComponent"
+            write: "setSurfaceComponent"
+            notify: "surfaceComponentChanged"
+            index: 2
+            lineNumber: 69
+        }
+        Signal { name: "lockStateChanged"; lineNumber: 90 }
+        Signal { name: "secureStateChanged"; lineNumber: 91 }
+        Signal { name: "surfaceComponentChanged"; lineNumber: 92 }
+        Method { name: "unlock"; lineNumber: 95 }
+        Method { name: "onScreensChanged"; lineNumber: 96 }
+    }
+    Component {
+        file: "session_lock.hpp"
+        lineNumber: 114
+        name: "WlSessionLockSurface"
+        accessSemantics: "reference"
+        defaultProperty: "data"
+        prototype: "Reloadable"
+        exports: ["Quickshell.Wayland/WlSessionLockSurface 0.0"]
+        exportMetaObjectRevisions: [0]
+        Property {
+            name: "contentItem"
+            type: "QQuickItem"
+            isPointer: true
+            read: "contentItem"
+            index: 0
+            lineNumber: 117
+            isReadonly: true
+        }
+        Property {
+            name: "visible"
+            type: "bool"
+            read: "isVisible"
+            notify: "visibleChanged"
+            index: 1
+            lineNumber: 121
+            isReadonly: true
+        }
+        Property {
+            name: "width"
+            type: "int"
+            read: "width"
+            notify: "widthChanged"
+            index: 2
+            lineNumber: 122
+            isReadonly: true
+        }
+        Property {
+            name: "height"
+            type: "int"
+            read: "height"
+            notify: "heightChanged"
+            index: 3
+            lineNumber: 123
+            isReadonly: true
+        }
+        Property {
+            name: "screen"
+            type: "QuickshellScreenInfo"
+            isPointer: true
+            read: "screen"
+            notify: "screenChanged"
+            index: 4
+            lineNumber: 125
+            isReadonly: true
+        }
+        Property {
+            name: "color"
+            type: "QColor"
+            read: "color"
+            write: "setColor"
+            notify: "colorChanged"
+            index: 5
+            lineNumber: 142
+        }
+        Property {
+            name: "data"
+            type: "QObject"
+            isList: true
+            read: "data"
+            index: 6
+            lineNumber: 143
+            isReadonly: true
+        }
+        Signal { name: "visibleChanged"; lineNumber: 175 }
+        Signal { name: "widthChanged"; lineNumber: 176 }
+        Signal { name: "heightChanged"; lineNumber: 177 }
+        Signal { name: "screenChanged"; lineNumber: 178 }
+        Signal { name: "colorChanged"; lineNumber: 179 }
+        Method { name: "onScreenDestroyed"; lineNumber: 182 }
+        Method { name: "onWidthChanged"; lineNumber: 183 }
+        Method { name: "onHeightChanged"; lineNumber: 184 }
+    }
+}
@@ -0,0 +1,92 @@
+pragma ComponentBehavior: Bound
+
+import QtQuick
+
+///! Rectangle capable of clipping content inside its border.
+/// > [!WARNING] This type requires at least Qt 6.7.
+///
+/// This is a specialized version of @@QtQuick.Rectangle that clips content
+/// inside of its border, including rounded rectangles. It costs more than
+/// @@QtQuick.Rectangle, so it should not be used unless you need to clip
+/// items inside of it to the border.
+Item {
+	id: root
+
+	/// If content should be displayed underneath the border.
+	///
+	/// Defaults to false, does nothing if the border is opaque.
+	property bool contentUnderBorder: false
+	/// If the content item should be resized to fit inside the border.
+	///
+	/// Defaults to `!contentUnderBorder`. Most useful when combined with
+	/// `anchors.fill: parent` on an item passed to the ClippingRectangle.
+	property bool contentInsideBorder: !root.contentUnderBorder
+	/// If the rectangle should be antialiased.
+	///
+	/// Defaults to true if any corner has a non-zero radius, otherwise false.
+	property /*bool*/alias antialiasing: rectangle.antialiasing
+	/// The background color of the rectangle, which goes under its content.
+	property /*color*/alias color: shader.backgroundColor
+	/// See @@QtQuick.Rectangle.border.
+	property clippingRectangleBorder border
+	/// Radius of all corners. Defaults to 0.
+	property /*real*/alias radius: rectangle.radius
+	/// Radius of the top left corner. Defaults to @@radius.
+	property /*real*/alias topLeftRadius: rectangle.topLeftRadius
+	/// Radius of the top right corner. Defaults to @@radius.
+	property /*real*/alias topRightRadius: rectangle.topRightRadius
+	/// Radius of the bottom left corner. Defaults to @@radius.
+	property /*real*/alias bottomLeftRadius: rectangle.bottomLeftRadius
+	/// Radius of the bottom right corner. Defaults to @@radius.
+	property /*real*/alias bottomRightRadius: rectangle.bottomRightRadius
+
+	/// Data of the ClippingRectangle's @@contentItem. (`list<QtObject>`).
+	///
+	/// See @@QtQuick.Item.data for details.
+	default property alias data: contentItem.data
+	/// Visual children of the ClippingRectangle's @@contentItem. (`list<Item>`).
+	///
+	/// See @@QtQuick.Item.children for details.
+	property alias children: contentItem.children
+	/// The item containing the rectangle's content.
+	/// There is usually no reason to use this directly.
+	readonly property alias contentItem: contentItem
+
+	Rectangle {
+		id: rectangle
+		anchors.fill: root
+		color: "#ffff0000"
+		border.color: "#ff00ff00"
+		border.pixelAligned: root.border.pixelAligned
+		border.width: root.border.width
+		layer.enabled: true
+		visible: false
+	}
+
+	Item {
+		id: contentItemContainer
+		anchors.fill: root
+
+		Item {
+			id: contentItem
+			anchors.fill: parent
+			anchors.margins: root.contentInsideBorder ? root.border.width : 0
+		}
+	}
+
+	ShaderEffectSource {
+		id: shaderSource
+		hideSource: true
+		sourceItem: contentItemContainer
+	}
+
+	ShaderEffect {
+		id: shader
+		anchors.fill: root
+		fragmentShader: `qrc:/Quickshell/Widgets/shaders/cliprect${root.contentUnderBorder ? "-ub" : ""}.frag.qsb`
+		property Rectangle rect: rectangle
+		property color backgroundColor: "white"
+		property color borderColor: root.border.color
+		property ShaderEffectSource content: shaderSource
+	}
+}
@@ -0,0 +1,63 @@
+import QtQuick
+
+///! ClippingRectangle that handles sizes and positioning for a single visual child.
+/// This component is useful for adding a clipping border or background rectangle to
+/// a child item. If you don't need clipping, use @@WrapperRectangle.
+///
+/// > [!NOTE] ClippingWrapperRectangle is a @@MarginWrapperManager based component.
+/// > See its documentation for information on how margins and sizes are calculated.
+///
+/// > [!WARNING] You should not set @@Item.x, @@Item.y, @@Item.width,
+/// > @@Item.height or @@Item.anchors on the child item, as they are used
+/// > by WrapperItem to position it. Instead set @@Item.implicitWidth and
+/// > @@Item.implicitHeight.
+ClippingWrapperRectangleInternal {
+	id: root
+
+	/// The default for @@topMargin, @@bottomMargin, @@leftMargin and @@rightMargin.
+	/// Defaults to 0.
+	property /*real*/alias margin: manager.margin
+	/// An extra margin applied in addition to @@topMargin, @@bottomMargin,
+	/// @@leftMargin, and @@rightMargin.
+	/// If @@contentInsideBorder is true, the rectangle's border width will be added
+	/// to this property. Defaults to 0.
+	property /*real*/alias extraMargin: manager.extraMargin
+	/// The requested top margin of the content item, not counting @@extraMargin.
+	///
+	/// Defaults to @@margin, and may be reset by assigning `undefined`.
+	property /*real*/alias topMargin: manager.topMargin
+	/// The requested bottom margin of the content item, not counting @@extraMargin.
+	///
+	/// Defaults to @@margin, and may be reset by assigning `undefined`.
+	property /*real*/alias bottomMargin: manager.bottomMargin
+	/// The requested left margin of the content item, not counting @@extraMargin.
+	///
+	/// Defaults to @@margin, and may be reset by assigning `undefined`.
+	property /*real*/alias leftMargin: manager.leftMargin
+	/// The requested right margin of the content item, not counting @@extraMargin.
+	///
+	/// Defaults to @@margin, and may be reset by assigning `undefined`.
+	property /*real*/alias rightMargin: manager.rightMargin
+	/// Determines if child item should be resized larger than its implicit size if
+	/// the parent is resized larger than its implicit size. Defaults to true.
+	property /*bool*/alias resizeChild: manager.resizeChild
+	/// Overrides the implicit width of the wrapper.
+	///
+	/// Defaults to the implicit width of the content item plus its left and right margin,
+	/// and may be reset by assigning `undefined`.
+	property /*real*/alias implicitWidth: manager.implicitWidth
+	/// Overrides the implicit height of the wrapper.
+	///
+	/// Defaults to the implicit width of the content item plus its top and bottom margin,
+	/// and may be reset by assigning `undefined`.
+	property /*real*/alias implicitHeight: manager.implicitHeight
+	/// See @@WrapperManager.child for details.
+	property alias child: manager.child
+
+	border.width: 0
+
+	__implicitWidthInternal: root.contentItem.implicitWidth + (root.contentInsideBorder ? root.border.width * 2 : 0)
+	__implicitHeightInternal: root.contentItem.implicitHeight + (root.contentInsideBorder ? root.border.width * 2 : 0)
+
+	MarginWrapperManager { id: manager }
+}
@@ -0,0 +1,7 @@
+import QtQuick
+
+ClippingRectangle {
+	id: root
+	property alias __implicitWidthInternal: root.implicitWidth
+	property alias __implicitHeightInternal: root.implicitHeight
+}
@@ -0,0 +1,67 @@
+import QtQuick
+
+///! Image component for displaying widget/icon style images.
+/// This is a specialization of @@QtQuick.Image configured for icon-style images,
+/// designed to make it easier to use correctly. If you need more control, use
+/// @@QtQuick.Image directly.
+///
+/// The image's aspect raito is assumed to be 1:1. If it is not 1:1, padding
+/// will be added to make it 1:1. This is currently applied before the actual
+/// aspect ratio of the image is taken into account, and may change in a future
+/// release.
+///
+/// You should use it for:
+/// - Icons for custom buttons
+/// - Status indicator icons
+/// - System tray icons
+/// - Things similar to the above.
+///
+/// Do not use it for:
+/// - Big images
+/// - Images that change size frequently
+/// - Anything that doesn't feel like an icon.
+///
+/// > [!INFO] More information about many of these properties can be found in
+/// > the documentation for @@QtQuick.Image.
+Item {
+	id: root
+
+	/// URL of the image. Defaults to an empty string.
+	/// See @@QtQuick.Image.source.
+	property /*string*/alias source: image.source
+	/// If the image should be loaded asynchronously. Defaults to false.
+	/// See @@QtQuick.Image.asynchronous.
+	property /*bool*/alias asynchronous: image.asynchronous
+	/// The load status of the image. See @@QtQuick.Image.status.
+	property alias status: image.status
+	/// If the image should be mipmap filtered. Defaults to false.
+	/// See @@QtQuick.Image.mipmap.
+	///
+	/// Try enabling this if your image is significantly scaled down
+	/// and looks bad because of it.
+	property /*bool*/alias mipmap: image.mipmap
+	/// The @@QtQuick.Image backing this object.
+	///
+	/// This is useful if you need to access more functionality than
+	/// exposed by IconImage.
+	property /*Image*/alias backer: image
+
+	/// The suggested size of the image. This is used as a default
+	/// for @@QtQuick.Item.implicitWidth and @@QtQuick.Item.implicitHeight.
+	property real implicitSize: 0
+
+	/// The actual size the image will be displayed at.
+	readonly property real actualSize: Math.min(root.width, root.height)
+
+	implicitWidth: root.implicitSize
+	implicitHeight: root.implicitSize
+
+	Image {
+		id: image
+		anchors.fill: parent
+		fillMode: Image.PreserveAspectFit
+
+		sourceSize.width: root.actualSize
+		sourceSize.height: root.actualSize
+	}
+}
@@ -0,0 +1,72 @@
+import QtQuick
+
+///! Item that handles sizes and positioning for a single visual child.
+/// This component is useful when you need to wrap a single component in
+/// an item, or give a single component a margin. See [QtQuick.Layouts]
+/// for positioning multiple items.
+///
+/// > [!NOTE] WrapperItem is a @@MarginWrapperManager based component.
+/// > See its documentation for information on how margins and sizes are calculated.
+///
+/// ### Example: Adding a margin to an item
+/// The snippet below adds a 10px margin to all sides of the @@QtQuick.Text item.
+///
+/// ```qml
+/// WrapperItem {
+///   margin: 10
+///
+///   @@QtQuick.Text { text: "Hello!" }
+/// }
+/// ```
+///
+/// > [!NOTE] The child item can be specified by writing it inline in the wrapper,
+/// > as in the example above, or by using the @@child property. See
+/// > @@WrapperManager.child for details.
+///
+/// > [!WARNING] You should not set @@Item.x, @@Item.y, @@Item.width,
+/// > @@Item.height or @@Item.anchors on the child item, as they are used
+/// > by WrapperItem to position it. Instead set @@Item.implicitWidth and
+/// > @@Item.implicitHeight.
+///
+/// [QtQuick.Layouts]: https://doc.qt.io/qt-6/qtquicklayouts-index.html
+Item {
+	/// The default for @@topMargin, @@bottomMargin, @@leftMargin and @@rightMargin.
+	/// Defaults to 0.
+	property /*real*/alias margin: manager.margin
+	/// An extra margin applied in addition to @@topMargin, @@bottomMargin,
+	/// @@leftMargin, and @@rightMargin. Defaults to 0.
+	property /*real*/alias extraMargin: manager.extraMargin
+	/// The requested top margin of the content item, not counting @@extraMargin.
+	///
+	/// Defaults to @@margin, and may be reset by assigning `undefined`.
+	property /*real*/alias topMargin: manager.topMargin
+	/// The requested bottom margin of the content item, not counting @@extraMargin.
+	///
+	/// Defaults to @@margin, and may be reset by assigning `undefined`.
+	property /*real*/alias bottomMargin: manager.bottomMargin
+	/// The requested left margin of the content item, not counting @@extraMargin.
+	///
+	/// Defaults to @@margin, and may be reset by assigning `undefined`.
+	property /*real*/alias leftMargin: manager.leftMargin
+	/// The requested right margin of the content item, not counting @@extraMargin.
+	///
+	/// Defaults to @@margin, and may be reset by assigning `undefined`.
+	property /*real*/alias rightMargin: manager.rightMargin
+	/// Determines if child item should be resized larger than its implicit size if
+	/// the parent is resized larger than its implicit size. Defaults to true.
+	property /*bool*/alias resizeChild: manager.resizeChild
+	/// Overrides the implicit width of the wrapper.
+	///
+	/// Defaults to the implicit width of the content item plus its left and right margin,
+	/// and may be reset by assigning `undefined`.
+	property /*real*/alias implicitWidth: manager.implicitWidth
+	/// Overrides the implicit height of the wrapper.
+	///
+	/// Defaults to the implicit width of the content item plus its top and bottom margin,
+	/// and may be reset by assigning `undefined`.
+	property /*real*/alias implicitHeight: manager.implicitHeight
+	/// See @@WrapperManager.child for details.
+	property /*Item*/alias child: manager.child
+
+	MarginWrapperManager { id: manager }
+}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
alvinlollo	f06bfd1512	fix(ci): Remove conflicting packages Tests / tests (push) Successful in 4m36s Details	2026-10-08 21:44:54 +11:00
alvinlollo	a940d91794	fix(ci): Fix end4 dependecies Tests / tests (push) Successful in 4m35s Details	2026-10-08 20:53:54 +11:00
alvinlollo	9af4bc6c27	fix(tests): Fix yamlint compliance with whitespace Tests / tests (push) Successful in 4m31s Details	2026-10-08 19:01:25 +11:00
alvinlollo	3c540f8bed	fix(test): Fix yaml formatting Tests / tests (push) Failing after 24s Details	2026-10-08 18:55:27 +11:00
alvinlollo	3f3bba05f3	fix(test): Fix formatting Tests / tests (push) Failing after 25s Details	2026-10-08 18:53:51 +11:00
alvinlollo	01913f7682	feat(jobs): Output conflicting packages Tests / tests (push) Failing after 2m24s Details	2026-10-08 18:46:47 +11:00
alvinlollo	f9a2978517	Update MicroTeX submodule pointer Tests / tests (push) Failing after 2m30s Details	2026-10-08 18:35:41 +11:00
alvinlollo	1e8a1e3282	fix(ci): Update Qt version to latest Upstream pin check / quickshell-pin (push) Successful in 46s Details Tests / tests (push) Failing after 2m54s Details	2026-10-08 18:19:34 +11:00
alvinlollo	db83549996	feat(gum): Add further additions of gum to install script Tests / tests (push) Successful in 2m29s Details	2026-10-08 14:48:20 +11:00
alvinlollo	59d82f06f5	feat(installer): sshd opt-in, gsettings replay, live-medium motd stamp Tests / tests (push) Successful in 2m50s Details - alvin-install: new sshd screen (default on) + install step. openssh is guaranteed into the pacstrap list when requested, and the final banner reports whether the enable actually succeeded (SSHD_APPLIED) instead of what was selected. The prompt warns that password login uses the same password as LUKS, and only mentions the GitHub key import when a username was given. - alvin-install: replay the `gsettings set` commands end-4 logged during its setup run with a clean env and a throwaway session bus as the target user, then read each key back in a second session to confirm it persisted (gvariant_unescape normalizes both '...' and "..." GVariant output). The venv check now walks the uv bin/python symlink chain, re-rooting absolute hops under $TARGET, since that link dangles on the live medium. - build: append the build stamp to the live /etc/motd (keeps the installed system's motd untouched) and drop alvin-install's install_motd step. - docs: installer sections in README/AGENTS.md, sshd notes, corrected line counts.	2026-10-07 21:55:30 +11:00
alvinlollo	1bb6f8dddd	ci: install archiso via private pacman config, not /etc/pacman.conf Tests / tests (push) Successful in 4m8s Details Writing stock core/extra over the host /etc/pacman.conf raced with the tests workflow, which appends [cachyos]/[chaotic-aur] to the same file — runs 132 and 133 ran concurrently on the runner, so either job could corrupt the other's config mid-pacman. Use 'pacman --config $(mktemp)' with stock core/extra instead: same DNS-lookup reduction (only core/extra sync, no cachyos/chaotic), zero writes to shared state. Verified on the runner: exit 0, only core/extra synced, host /etc/pacman.conf mtime unchanged.	2026-10-07 11:22:12 +11:00
alvinlollo	0fbec83573	ci: retry pacman syncs and reset host pacman.conf before build Tests / tests (push) Successful in 5m7s Details Run 131 failed at 'pacman -Syu archiso jq' because the gateway (192.168.1.1) intermittently drops UDP/53: cachyos.db and chaotic-aur.db lookups hit libalpm's 10s resolve timeout while core/extra survived on resolved's cache. - build-iso: reset the host /etc/pacman.conf to stock core/extra first (tests.yaml leaves [cachyos]/[chaotic-aur] behind, and mkarchiso reads the profile's pacman.conf anyway), pre-warm mirror hostnames in the resolver cache, then retry pacman -Syu 5x with backoff. - tests: wrap all three pacman -Syu calls in the same retry loop. DNS-side redundancy was added on the runner separately (networkd drop-in adds 1.1.1.1/8.8.8.8 next to the gateway).	2026-10-07 11:14:28 +11:00
alvinlollo	a6c99b72d0	fix(ci): ensure /dev/fd symlinks exist for mkinitcpio and procsub Tests / tests (push) Successful in 2m33s Details The chroot's /dev only gains fd/stdin/stdout/stderr symlinks at boot, and container executors often lack them, which breaks mkinitcpio's preset step (pipes through /dev/stdin) and bash process substitution ("/dev/fd/63: No such file or directory"). - build-iso workflow: create the links in the executor's /dev, then mount a fresh devtmpfs and create them there too so the chroot tree is covered whether the executor's /dev is devtmpfs or a plain tmpfs - customize_airootfs.sh: self-heal the same links inside the chroot	2026-10-06 14:53:16 +11:00
alvinlollo	c64c64dc97	feat(installer): ask GitHub username first in git screen Tests / tests (push) Successful in 2m14s Details screen_git now prompts GitHub username before git name/email, and the screen description plus installation summary list SSH before git to match the new prompt order. Behavior unchanged - prompts are independent and all assignment sites are read after the screen returns.	2026-10-05 17:42:15 +11:00
alvinlollo	319333e400	fix(packages): rename syncthingtray-qt6, ship neofetch from localrepo Tests / tests (push) Successful in 2m23s Details CI package check failed on main (400/402): - syncthingtray-qt6 no longer exists in the AUR (RPC returns nothing); the qt6 build is now the official 'syncthingtray' package in extra/ cachyos - rename it in packages.x86_64 and drop the dead AUR_MISSING entry from build-end4-deps.sh - neofetch left the distro repos (only chaotic-neofetch-git remains); build the AUR package locally (7.1.0-2, PGP-verified against Dylan Araps' key) and commit it to localrepo/ with a reindexed local-aur db so both the CI check (file glob) and pacstrap ([local-aur]) work - un-indent the package lists in build-end4-deps.sh: CI accepts repo-less packages via 'grep -qxF <name>' (exact whole-line match), which could never match indented names Verified locally with an exact replica of the CI check: 402/402.	2026-10-05 17:32:23 +11:00
alvinlollo	bb6f64e977	feat(installer): build-stamp motd, LUKS mode A/B, TPM2, unl0kr, login managers Tests / tests (push) Failing after 2m33s Details - profiledef.sh stages airootfs/root/.iso-build-stamp (git/CI gated, falls back to 'commit unknown'); customize_airootfs.sh installs it as /etc/alvin-build-stamp; install_motd appends it to the target /etc/motd - alvin-install: skippable git/GitHub screens with ssh-import-id import (yay build + python-distro, curl .keys fallback), LUKS Mode A (systemd sd-encrypt + rd.luks.name) vs Mode B (unl0kr + cryptdevice), TPM2 enrollment via $PASSWORD with rd.luks.options activation, unl0kr build/verify with Mode-A fallback, login manager none/greetd/sddm/gdm (enable DM before disabling getty@tty1), autologin per DM (forced off when TPM enrolled), build-stamp motd; includes the existing GRUB_DISABLE_BOOTNEXT grub tweak - review fixes: greetd autologin TOML quoting, .ssh chowned before ssh-import-id, builtin-aware initramfs module verification across all installed kernels, curl exit-code split (fetch failure vs no keys), plain Hyprland on every login path - add curl to packages.x86_64; document stamp flow and installer in AGENTS.md/README.md	2026-10-05 16:26:12 +11:00
				`@@ -0,0 +1 @@`
				`Unnamed repository; edit this file 'description' to name the repository.`