alvinlollo
ec5c598829
- Ask for sudo once up front and refresh the timestamp in the background (250s, sudo -n true only) so shelly/makepkg stay un-sudo'd and the user is never re-prompted mid-run; the loop is killed by a cleanup EXIT trap that also removes WORK_DIR. - Replace the numbered text menu with gum choose, wrap sub-script runs in gum spin, and add sudo -v checkpoints before each privileged menu step. - Add an INSTALL SUMMARY block (log/report paths, failure count). - Move the fish-shell refusal after the gum bootstrap so it can always use gum confirm; drop the ERR trap and hand-rolled select_options now that errexit + gum cover those paths.
437 lines
19 KiB
Bash
Executable File
437 lines
19 KiB
Bash
Executable File
#!/usr/bin/bash
|
|
|
|
# Strict mode from the very start: every tolerated failure in this script is
|
|
# an explicit guard (if ! / || record_failure), so preamble steps are checked
|
|
# too. Anything unguarded aborts the run via errexit.
|
|
set -euo pipefail
|
|
|
|
skip_watermark=false
|
|
if [ "${1:-}" = "--skip-watermark" ]; then
|
|
skip_watermark=true
|
|
fi
|
|
|
|
if [ "$skip_watermark" = false ]; then
|
|
clear 2>/dev/null || true
|
|
echo '
|
|
____ _ _ _ _ _
|
|
| __ ) _ _ __ _| |_ _(_)_ __ | | ___ | | | ___
|
|
| _ \| | | | / _ | \ \ / / | _ \| |/ _ \| | |/ _ \
|
|
| |_) | |_| | | (_| | |\ V /| | | | | | (_) | | | (_) |
|
|
|____/ \__ | \__ _|_| \_/ |_|_| |_|_|\___/|_|_|\___/
|
|
|___/
|
|
|
|
--------------- Single Download script ---------------
|
|
BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE UNDER THE GPL-2.0 LICENSE,
|
|
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
|
|
See the LICENSE for more detail
|
|
'
|
|
fi
|
|
|
|
# --- Failure handling & full console log ------------------------------------
|
|
# Everything from here on is teed to a log file in /tmp, and Arch-only step
|
|
# failures are recorded instead of aborting the rest of the installation.
|
|
TTY_OK=false
|
|
if [ -t 1 ]; then
|
|
TTY_OK=true
|
|
fi
|
|
|
|
# One timestamp for both files, mktemp so the names are not predictable
|
|
STAMP="$(date +%Y%m%d-%H%M%S)"
|
|
LOG="$(mktemp "/tmp/installbeta-$STAMP-XXXXXX.log")"
|
|
REPORT="$(mktemp "/tmp/installbeta-failures-$STAMP-XXXXXX.txt")"
|
|
FAILED=()
|
|
|
|
exec > >(tee -a "$LOG") 2>&1
|
|
|
|
# gum draws its TUI on stderr - keep that on the real terminal, not the log pipe
|
|
gum_tty() {
|
|
if [ "$TTY_OK" = true ]; then
|
|
gum "$@" 2>/dev/tty
|
|
else
|
|
gum "$@"
|
|
fi
|
|
}
|
|
|
|
# Record a failed step: remember it, print it now, keep installing
|
|
record_failure() {
|
|
FAILED+=("$1 — $2")
|
|
echo "!! FAILED: $1 — $2 (continuing with the rest of the installation)"
|
|
echo "$(date '+%F %T') $1 — $2" >>"$REPORT"
|
|
}
|
|
|
|
# Private temp workspace for downloads and clones. Predictable names in /tmp
|
|
# are a symlink attack vector on multi-user systems; the trap cleans up too.
|
|
WORK_DIR="$(mktemp -d)"
|
|
|
|
# Also stops the sudo keep-alive loop below when the script exits (any path:
|
|
# normal end, menu cancel, errexit, signal). SUDO_LOOP_PID is unset if the
|
|
# script bails out before the loop starts, hence the default value.
|
|
cleanup() {
|
|
if [ -n "${SUDO_LOOP_PID:-}" ]; then
|
|
kill "$SUDO_LOOP_PID" 2>/dev/null || true
|
|
fi
|
|
rm -rf "$WORK_DIR"
|
|
}
|
|
trap cleanup EXIT
|
|
|
|
# Resolve where this script lives so local script/config fallbacks do not
|
|
# depend on the caller's current directory. Empty when piped (curl | bash).
|
|
if [ -n "${BASH_SOURCE[0]:-}" ] && [ -f "${BASH_SOURCE[0]}" ]; then
|
|
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
|
else
|
|
SCRIPT_DIR=""
|
|
fi
|
|
|
|
sudo -v # Ask for sudo upfront so the user is prompted only once
|
|
|
|
# Sudo keep-alive loop
|
|
sudo_keep_alive() {
|
|
while true; do
|
|
sleep 250
|
|
sudo -n true 2>/dev/null || true
|
|
# $$ is the main script's PID even in this background subshell: exit as
|
|
# soon as the installer is gone, as a backstop for the EXIT trap.
|
|
kill -0 "$$" 2>/dev/null || exit
|
|
done
|
|
}
|
|
sudo_keep_alive &
|
|
SUDO_LOOP_PID=$!
|
|
echo "Keeping sudo alive on PID $SUDO_LOOP_PID - refreshing every 250s"
|
|
|
|
# Install prerequisites
|
|
if command -v shelly >/dev/null; then
|
|
echo "Shelly detected. Installing prerequisites"
|
|
shelly install standard base-devel git zsh curl wget libnewt rsync gum --upgrade --no-confirm ||
|
|
record_failure "Prerequisites (shelly)" "installing base packages via shelly failed"
|
|
fi
|
|
|
|
if command -v apt >/dev/null; then
|
|
echo "apt detected. Installing prerequisites"
|
|
sudo apt update || record_failure "Prerequisites (apt)" "apt update failed"
|
|
sudo apt full-upgrade -y || record_failure "Prerequisites (apt)" "apt full-upgrade failed"
|
|
sudo -v
|
|
sudo apt install git zsh curl wget rsync gum -y ||
|
|
record_failure "Prerequisites (apt)" "apt install of base packages failed"
|
|
fi
|
|
|
|
# Ensure gum is installed
|
|
if ! command -v gum >/dev/null; then
|
|
echo "gum is not installed. Installing it now..."
|
|
|
|
if command -v shelly >/dev/null; then
|
|
echo "shelly detected. Installing gum"
|
|
shelly install standard gum --no-confirm || {
|
|
echo "Failed to install gum. Exiting."
|
|
exit 1
|
|
}
|
|
fi
|
|
|
|
if command -v apt >/dev/null; then
|
|
echo "apt detected. Installing gum"
|
|
sudo apt install gum -y || {
|
|
echo "Failed to install gum. Exiting."
|
|
exit 1
|
|
}
|
|
fi
|
|
fi
|
|
|
|
# Install shelly as a dependency if not present (Arch-based)
|
|
if command -v pacman >/dev/null; then
|
|
# Install build prerequisites for shelly
|
|
if ! gum spin --show-error -s dot --title "Install base-devel and git" -- sudo pacman -S --needed --noconfirm base-devel git; then
|
|
echo "--------------------------------------------------------------------"
|
|
echo "Failed to install prerequisite packages for Shelly. You can try running it manually:"
|
|
echo "sudo pacman -S --needed --noconfirm base-devel git"
|
|
echo "--------------------------------------------------------------------"
|
|
record_failure "Shelly bootstrap (Arch-only)" "failed to install base-devel/git prerequisites"
|
|
fi
|
|
# Check if shelly binary exists
|
|
if ! command -v shelly >/dev/null; then
|
|
echo "shelly is NOT installed. Running installation commands..."
|
|
if ! gum spin --show-error -s dot --title "Clone Shelly from AUR" -- git clone https://aur.archlinux.org/shelly.git "$WORK_DIR/shelly"; then
|
|
echo "--------------------------------------------------------------------"
|
|
echo "Failed to clone shelly repository. You can try running it manually:"
|
|
echo "git clone https://aur.archlinux.org/shelly.git \"$WORK_DIR/shelly\""
|
|
echo "--------------------------------------------------------------------"
|
|
record_failure "Shelly bootstrap (Arch-only)" "failed to clone the shelly AUR repository"
|
|
elif ! (cd "$WORK_DIR/shelly" && gum spin --show-error -s dot --title "Install Shelly" makepkg -si --noconfirm); then
|
|
echo "--------------------------------------------------------------------"
|
|
echo "Failed to build and install shelly. You can try running it manually:"
|
|
echo "cd \"$WORK_DIR/shelly\" && makepkg -si --noconfirm"
|
|
echo "--------------------------------------------------------------------"
|
|
record_failure "Shelly bootstrap (Arch-only)" "failed to build shelly with makepkg"
|
|
fi
|
|
else
|
|
echo "Shelly is already installed."
|
|
fi
|
|
fi
|
|
|
|
# gum drives every interactive dialog in this script and there is no fallback
|
|
# menu, so a system that ended up without it must abort here.
|
|
if ! command -v gum >/dev/null; then
|
|
echo "gum is required but could not be installed on this system (no shelly/apt found)." >&2
|
|
echo "Install it manually: https://github.com/charmbracelet/gum" >&2
|
|
exit 1
|
|
fi
|
|
|
|
# Detect fish shell and warn user to run with bash instead (bash-only syntax).
|
|
# Placed after the gum bootstrap above so the dialog can always use gum confirm
|
|
# instead of falling back to a plain text prompt.
|
|
if [ -n "${FISH_VERSION:-}" ] || case "${SHELL:-}" in *fish*) ;; *) false ;; esac then
|
|
if ! gum_tty confirm "$(printf 'Your default shell appears to be fish.\n\nThis script must be run with bash. It uses bash-only syntax and will fail under fish.\n\nRun it with:\n bash installbeta.sh\n\nContinue anyway?')"; then
|
|
echo "Aborted. Please run this script with bash, not fish. e.g.: bash installbeta.sh"
|
|
exit 1
|
|
fi
|
|
fi
|
|
|
|
# Options for the gum menu
|
|
OPTIONS=(
|
|
"Run zsh setup script"
|
|
"Run fish setup script"
|
|
"Run LazyVim setup script"
|
|
"Install Docker"
|
|
"Install Standard Packages (Shelly)"
|
|
"Install AUR Packages (Shelly)"
|
|
"Install affinity with GUI"
|
|
"Run bat setup script"
|
|
)
|
|
|
|
# Present the menu with gum (gum is guaranteed by the bootstrap above)
|
|
if ! CHOICE=$(gum_tty choose --no-limit --height 14 \
|
|
--header "Tab = select, Enter = confirm:" \
|
|
--selected "Run fish setup script,Install Standard Packages (Shelly),Install AUR Packages (Shelly),Run bat setup script" \
|
|
"${OPTIONS[@]}"); then
|
|
echo "No options selected (menu cancelled). Nothing was installed."
|
|
exit 1
|
|
fi
|
|
|
|
# gum exits 0 with empty output when nothing is selected - treat that as a
|
|
# cancel too, otherwise the run below would silently install nothing.
|
|
if [ -z "$CHOICE" ]; then
|
|
echo "No options selected. Nothing was installed."
|
|
exit 1
|
|
fi
|
|
|
|
echo "User selected:"
|
|
echo "$CHOICE"
|
|
|
|
# Process selected options in menu order
|
|
while IFS= read -r selection; do
|
|
# Skip options the user did not select
|
|
grep -qxF "$selection" <<<"$CHOICE" || continue
|
|
case "$selection" in
|
|
"Run zsh setup script")
|
|
echo "Running zsh setup script..."
|
|
sudo -v
|
|
# Runs local script unless it does not exist (SCRIPT_DIR, not CWD)
|
|
if [ -n "$SCRIPT_DIR" ] && [ -f "$SCRIPT_DIR/zsh.sh" ]; then
|
|
echo "Found local script, running..."
|
|
gum spin --show-error -s dot --title "Installing zsh with local script" -- bash "$SCRIPT_DIR/zsh.sh" --skip-watermark || {
|
|
rc=$?
|
|
record_failure "Run zsh setup script" "zsh.sh exited with status $rc"
|
|
}
|
|
else
|
|
curl -fsSL https://raw.githubusercontent.com/alvinlollo/Single-install-script/refs/heads/main/zsh.sh | gum spin --show-error -s dot --title "Installing zsh" -- bash -s -- --skip-watermark || {
|
|
rc=$?
|
|
record_failure "Run zsh setup script" "downloaded zsh.sh exited with status $rc"
|
|
}
|
|
fi
|
|
;;
|
|
"Run fish setup script")
|
|
echo "Running fish setup script..."
|
|
sudo -v
|
|
# Runs local script unless it does not exist (SCRIPT_DIR, not CWD)
|
|
if [ -n "$SCRIPT_DIR" ] && [ -f "$SCRIPT_DIR/fish.sh" ]; then
|
|
echo "Found local script, running..."
|
|
gum spin --show-error -s dot --title "Installing fish with local script" -- bash "$SCRIPT_DIR/fish.sh" --skip-watermark || {
|
|
rc=$?
|
|
record_failure "Run fish setup script" "fish.sh exited with status $rc"
|
|
}
|
|
else
|
|
gum spin --show-error -s dot --title "Installing fish shell" \
|
|
bash -c "curl -fsSL https://raw.githubusercontent.com/alvinlollo/Single-install-script/refs/heads/main/fish.sh | bash -s -- --skip-watermark" || {
|
|
rc=$?
|
|
record_failure "Run fish setup script" "downloaded fish.sh exited with status $rc"
|
|
}
|
|
fi
|
|
;;
|
|
"Run LazyVim setup script")
|
|
echo "Running LazyVim setup script..."
|
|
sudo -v
|
|
# Runs local script unless it does not exist (SCRIPT_DIR, not CWD)
|
|
if [ -n "$SCRIPT_DIR" ] && [ -f "$SCRIPT_DIR/LazyVim.sh" ]; then
|
|
echo "Found local script, running..."
|
|
bash "$SCRIPT_DIR/LazyVim.sh" || {
|
|
rc=$?
|
|
record_failure "Run LazyVim setup script" "LazyVim.sh exited with status $rc"
|
|
}
|
|
else
|
|
curl -fsSL https://raw.githubusercontent.com/alvinlollo/Single-install-script/refs/heads/main/LazyVim.sh | bash || {
|
|
rc=$?
|
|
record_failure "Run LazyVim setup script" "downloaded LazyVim.sh exited with status $rc"
|
|
}
|
|
fi
|
|
;;
|
|
"Install Docker")
|
|
echo "Installing Docker..."
|
|
sudo -v
|
|
if ! command -v docker >/dev/null; then
|
|
echo "docker is NOT installed. Installing..."
|
|
if curl -fsSL https://get.docker.com -o "$WORK_DIR/get-docker.sh" &&
|
|
sh "$WORK_DIR/get-docker.sh"; then
|
|
sudo usermod -aG docker "$USER" ||
|
|
record_failure "Install Docker" "adding $USER to the docker group failed"
|
|
else
|
|
rc=$?
|
|
record_failure "Install Docker" "docker installer script exited with status $rc"
|
|
fi
|
|
else
|
|
sudo usermod -aG docker "$USER" ||
|
|
record_failure "Install Docker" "adding $USER to the docker group failed"
|
|
echo "Docker is already installed."
|
|
fi
|
|
echo "NOTE: $USER has been added to the docker group."
|
|
echo "Log out and back in (or reboot) for the group membership to take effect."
|
|
;;
|
|
"Install Standard Packages (Shelly)")
|
|
echo "Installing Standard Packages via Shelly backup..."
|
|
# Check if shelly binary is installed
|
|
if ! command -v shelly >/dev/null; then
|
|
echo "Cannot proceed: shelly binary not found (Arch-only)"
|
|
record_failure "Install Standard Packages (Shelly)" "shelly binary not found (Arch-only)"
|
|
# Install standard packages from shelly backup
|
|
# Runs local script unless it does not exist (SCRIPT_DIR, not CWD)
|
|
sudo -v
|
|
elif [ -n "$SCRIPT_DIR" ] && [ -f "$SCRIPT_DIR/configs/shelly-standard.toml" ]; then
|
|
echo "Found local backup"
|
|
shelly backup --import --name shelly-standard --directory "$SCRIPT_DIR/configs" --no-confirm || {
|
|
rc=$?
|
|
record_failure "Install Standard Packages (Shelly)" "shelly backup import exited with status $rc"
|
|
}
|
|
elif ! curl -fsSL https://raw.githubusercontent.com/alvinlollo/Single-install-script/refs/heads/main/configs/shelly-standard.toml -o "$WORK_DIR/shelly-standard.toml"; then
|
|
echo "--------------------------------------------------------------------"
|
|
echo "Failed to download shelly backup. You can try running it manually:"
|
|
echo "curl -fsSL https://raw.githubusercontent.com/alvinlollo/Single-install-script/refs/heads/main/configs/shelly-standard.toml -o \"$WORK_DIR/shelly-standard.toml\""
|
|
echo "--------------------------------------------------------------------"
|
|
record_failure "Install Standard Packages (Shelly)" "failed to download shelly-standard.toml"
|
|
elif ! shelly backup --import --name shelly-standard --directory "$WORK_DIR" --no-confirm; then
|
|
echo "--------------------------------------------------------------------"
|
|
echo "Failed to install Standard packages. You can try running it manually:"
|
|
echo "shelly backup --import --name shelly-standard --directory \"$WORK_DIR\" --no-confirm"
|
|
echo "--------------------------------------------------------------------"
|
|
record_failure "Install Standard Packages (Shelly)" "shelly backup import failed"
|
|
fi
|
|
;;
|
|
"Install AUR Packages (Shelly)")
|
|
echo "Installing AUR Packages via Shelly backup..."
|
|
sudo -v
|
|
# Check for shelly before installing AUR packages
|
|
if ! command -v shelly >/dev/null; then
|
|
echo "Cannot proceed: shelly binary not found (Arch-only)"
|
|
record_failure "Install AUR Packages (Shelly)" "shelly binary not found (Arch-only)"
|
|
# Install AUR packages from shelly backup
|
|
# Runs local script unless it does not exist (SCRIPT_DIR, not CWD)
|
|
elif [ -n "$SCRIPT_DIR" ] && [ -f "$SCRIPT_DIR/configs/shelly-aur.toml" ]; then
|
|
echo "Found local backup"
|
|
shelly backup --import --name shelly-aur --directory "$SCRIPT_DIR/configs" --no-confirm || {
|
|
rc=$?
|
|
record_failure "Install AUR Packages (Shelly)" "shelly backup import exited with status $rc"
|
|
}
|
|
elif ! curl -fsSL https://raw.githubusercontent.com/alvinlollo/Single-install-script/refs/heads/main/configs/shelly-aur.toml -o "$WORK_DIR/shelly-aur.toml"; then
|
|
echo "--------------------------------------------------------------------"
|
|
echo "Failed to download shelly backup. You can try running it manually:"
|
|
echo "curl -fsSL https://raw.githubusercontent.com/alvinlollo/Single-install-script/refs/heads/main/configs/shelly-aur.toml -o \"$WORK_DIR/shelly-aur.toml\""
|
|
echo "--------------------------------------------------------------------"
|
|
record_failure "Install AUR Packages (Shelly)" "failed to download shelly-aur.toml"
|
|
elif ! shelly backup --import --name shelly-aur --directory "$WORK_DIR" --no-confirm; then
|
|
echo "--------------------------------------------------------------------"
|
|
echo "Failed to install AUR packages. You can try running it manually:"
|
|
echo "shelly backup --import --name shelly-aur --directory \"$WORK_DIR\" --no-confirm"
|
|
echo "--------------------------------------------------------------------"
|
|
record_failure "Install AUR Packages (Shelly)" "shelly backup import failed"
|
|
fi
|
|
;;
|
|
"Install affinity with GUI")
|
|
echo "Installing GUI dependencies"
|
|
sudo -v
|
|
if command -v shelly >/dev/null; then
|
|
echo "shelly found"
|
|
shelly install standard python-pyqt6 --no-confirm ||
|
|
record_failure "Install affinity with GUI" "installing python-pyqt6 via shelly failed"
|
|
fi
|
|
if command -v dnf >/dev/null; then
|
|
echo "dnf found"
|
|
sudo dnf install python3-pyqt6 ||
|
|
record_failure "Install affinity with GUI" "installing python3-pyqt6 via dnf failed"
|
|
fi
|
|
if command -v apt >/dev/null; then
|
|
echo "apt found"
|
|
sudo apt install python3-pyqt6 -y ||
|
|
record_failure "Install affinity with GUI" "installing python3-pyqt6 via apt failed"
|
|
fi
|
|
echo "Install affinity with ryzendew's gui installer"
|
|
echo "You must manually select to install in the GUI"
|
|
echo "Github repo: https://github.com/ryzendew/Linux-Affinity-Installer"
|
|
echo "Starting the GUI installer in 10 seconds - read the notes above first."
|
|
sleep 10
|
|
{ curl -fsSL https://raw.githubusercontent.com/ryzendew/AffinityOnLinux/refs/heads/main/AffinityScripts/AffinityLinuxInstaller.py \
|
|
-o "$WORK_DIR/AffinityLinuxInstaller.py" &&
|
|
python3 "$WORK_DIR/AffinityLinuxInstaller.py"; } || {
|
|
rc=$?
|
|
record_failure "Install affinity with GUI" "affinity installer exited with status $rc"
|
|
}
|
|
;;
|
|
"Run bat setup script")
|
|
echo "Running bat setup script..."
|
|
# Runs local script unless it does not exist (SCRIPT_DIR, not CWD)
|
|
if [ -n "$SCRIPT_DIR" ] && [ -f "$SCRIPT_DIR/bat.sh" ]; then
|
|
echo "Found local script, running..."
|
|
bash "$SCRIPT_DIR/bat.sh" --skip-watermark || {
|
|
rc=$?
|
|
record_failure "Run bat setup script" "bat.sh exited with status $rc"
|
|
}
|
|
else
|
|
curl -fsSL https://raw.githubusercontent.com/alvinlollo/Single-install-script/refs/heads/main/bat.sh | bash -s -- --skip-watermark || {
|
|
rc=$?
|
|
record_failure "Run bat setup script" "downloaded bat.sh exited with status $rc"
|
|
}
|
|
fi
|
|
;;
|
|
*)
|
|
echo "Invalid option selected: $selection"
|
|
;;
|
|
esac
|
|
done < <(printf '%s\n' "${OPTIONS[@]}")
|
|
|
|
echo "Installation process complete."
|
|
|
|
# Show (and save) what failed - the run itself never aborts on a failed step
|
|
if [ "${#FAILED[@]}" -gt 0 ]; then
|
|
{
|
|
echo ""
|
|
echo "================ FAILURE SUMMARY ================"
|
|
echo "installbeta.sh finished at $(date '+%F %T') - ${#FAILED[@]} step(s) failed:"
|
|
printf ' - %s\n' "${FAILED[@]}"
|
|
echo ""
|
|
echo "Full console log: $LOG"
|
|
echo "Failure report: $REPORT"
|
|
echo "==================================================="
|
|
} | tee -a "$REPORT"
|
|
|
|
if [ "$TTY_OK" = true ] && command -v gum >/dev/null; then
|
|
gum_tty pager <"$REPORT" || true
|
|
fi
|
|
|
|
# Non-zero so callers and CI can detect the failed run
|
|
exit 1
|
|
fi
|
|
|
|
echo "================ INSTALL SUMMARY ================"
|
|
echo "installbeta.sh finished at $(date '+%F %T') - ${#FAILED[@]} step(s) failed:"
|
|
echo ""
|
|
echo "Full console log: /tmp/installbeta-$STAMP-XXXXXX.log"
|
|
echo "Failure report: $REPORT"
|
|
echo "==================================================="
|
|
|
|
exit 0
|