initial commit

libraries/Adafruit_CircuitPlayground/examples/analog_sensors/analog_sensors.ino

@@ -0,0 +1,83 @@
+// Circuit Playground Analog Sensor Demo
+// Shows how to read an analog sensor like temperature, light,
+// sound, or even external inputs and convert the analog value
+// to color and sound on the board.  Will light up NeoPixel 4 and 5
+// with a color proportional to the analog value, and if the slide
+// switch is turned to the left will play a music tone proportional
+// to the value.
+#include <Adafruit_CircuitPlayground.h>
+#include <Wire.h>
+#include <SPI.h>
+
+// Change the analog input value below to try different sensors:
+#define ANALOG_INPUT  A5  // Specify the analog input to read.
+                          // Circuit Playground has the following
+                          // inputs available:
+                          //  - A0  = temperature sensor / thermistor
+                          //  - A4  = sound sensor / microphone
+                          //  - A5  = light sensor
+                          //  - A7  = pin #6 on board
+                          //  - A9  = pin #9 on board
+                          //  - A10 = pin #10 on board
+                          //  - A11 = pin #12 on board
+
+// These defines set the range of expected analog values.
+// This is used to scale the NeoPixels, sound, etc.
+#define VALUE_MIN     0
+#define VALUE_MAX     200
+
+// These defines set the range of pixel color when mapping
+// to the sensor value.
+#define COLOR_RED_MIN    255  
+#define COLOR_GREEN_MIN  0
+#define COLOR_BLUE_MIN   0
+
+#define COLOR_RED_MAX    0
+#define COLOR_GREEN_MAX  0
+#define COLOR_BLUE_MAX   255
+
+// These defines set the range of sound frequencies when
+// mapping to the sensor value.
+#define TONE_FREQ_MIN    523  // C5 note
+#define TONE_FREQ_MAX    988  // B5 note
+
+
+void setup() {
+  // Setup serial port.
+  Serial.begin(115200);
+  Serial.println("Circuit Playground Analog Sensor Demos!");
+
+  // Setup Circuit Playground library.
+  CircuitPlayground.begin();
+}
+
+void loop() {
+  // Get the sensor sensor value and print it out (can use serial plotter
+  // to view realtime graph!).
+  uint16_t value = analogRead(ANALOG_INPUT);
+  Serial.println(value, DEC);
+
+  // Map the sensor value to a color.
+  // Use the range of minimum and maximum sensor values and
+  // min/max colors to do the mapping.
+  int red = map(value, VALUE_MIN, VALUE_MAX, COLOR_RED_MIN, COLOR_RED_MAX);
+  int green = map(value, VALUE_MIN, VALUE_MAX, COLOR_GREEN_MIN, COLOR_GREEN_MAX);
+  int blue = map(value, VALUE_MIN, VALUE_MAX, COLOR_BLUE_MIN, COLOR_BLUE_MAX);
+
+  // Light up pixel #4 and 5 with the color.
+  CircuitPlayground.clearPixels();
+  CircuitPlayground.setPixelColor(4, red, green, blue);
+  CircuitPlayground.setPixelColor(5, red, green, blue);
+
+  // Map the sensor value to a tone frequency.
+  int frequency = map(value, VALUE_MIN, VALUE_MAX, TONE_FREQ_MIN, TONE_FREQ_MAX);
+
+  // Play the tone if the slide switch is turned on (to the left).
+  if (CircuitPlayground.slideSwitch()) {
+    // Play tone of the mapped frequency value for 100 milliseconds.
+    CircuitPlayground.playTone(frequency, 100);
+  }
+
+  // Delay for a bit and repeat the loop.
+  delay(100);
+}