# Arduino Neovim Configuration

This directory contains the Neovim configuration for Arduino development, using [Arduino-Nvim](https://github.com/yuukiflow/Arduino-Nvim) with **LazyVim**.

## Installation

1. Copy `lua/plugins/arduino.lua` to your LazyVim plugins directory (e.g. `~/.config/nvim/lua/plugins/`)
2. Copy `.arduino_config.lua` to your Arduino project root

## Custom Keybinds

| Keybind | Command | Description |
|---------|---------|-------------|
| `<Leader>mc` | `:InoCheck` | Compile and verify sketch |
| `<Leader>mu` | `:InoUpload` | Upload sketch to board |
| `<Leader>ms` | `:InoStatus` | Display board, port & FQBN status |
| `<Leader>mg` | `:InoGUI` | Open GUI for board/port selection |
| `<Leader>mm` | `:InoMonitor` | Open serial monitor |
| `<Leader>ml` | `:InoLib` | Open library manager |
| `<Leader>mb` | `:InoSelectBoard` | Select Arduino board |
| `<Leader>mp` | `:InoSelectPort` | Select Arduino port |
| `<Leader>mr` | `:InoUploadReset` | Upload with manual reset (UNO R4 WiFi) |

## Board Configuration

Edit `.arduino_config.lua` to set your board, port, and baudrate:

```lua
return {
  board = "studuino:avr:studuino",
  port = "/dev/ttyUSB0",
  baudrate = "115200",
}
```

## Requirements

- [arduino-cli](https://arduino.github.io/arduino-cli/latest/installation/)
- [arduino-language-server](https://github.com/arduino/arduino-language-server)
- [Telescope.nvim](https://github.com/nvim-telescope/telescope.nvim)
- [nvim-lspconfig](https://github.com/neovim/nvim-lspconfig)