Merge pull request #467 from sethoscope/set-repeater-key

Add UI for setting repeater identity keys

lib/l10n/app_en.arb

@@ -1474,6 +1474,26 @@
   "repeater_advancedSettingsSubtitle": "Tuning knobs for experienced operators",
   "repeater_pathHashMode": "Path hash mode",
   "repeater_pathHashModeHelper": "Bytes used to encode this repeater's ID in flood path/loop-detect tags. 0=1 byte (256 IDs, up to 64 hops), 1=2 bytes (65K IDs, up to 32 hops), 2=3 bytes (16M IDs, up to 21 hops). v1.13 and older firmware drops multi-byte paths — only raise once your network is on v1.14+.",
+  "repeater_keySettings": "Change Identity Keys",
+  "repeater_keySettingsSubtitle": "Change the public/private keypair",
+  "repeater_prvKey": "Private key",
+  "repeater_prvKeyHelper": "A new private key for the repeater, a 128-character hex string.",
+  "repeater_generatePrvKey": "Generate a random keypair",
+  "repeater_stopGeneratingPrvKey": "Interrupt search for keypair",
+  "repeater_pubKey": "Public key",
+  "repeater_pubKeyHelper": "This is the public key that goes with the generated private key. You can't set this directly.",
+  "repeater_pubKeyPrefix": "Desired prefix",
+  "repeater_pubKeyPrefixHelper": "Find a public key that starts with these hex digits. Expected tries needed: {tries}.",
+  "@repeater_pubKeyPrefixHelper": {
+    "placeholders": {
+      "tries": {
+        "type": "int"
+      }
+    }
+  },
+
+
+
   "repeater_txDelay": "Flood TX delay",
   "repeater_txDelayHelper": "Retransmit spacing for flood traffic, as a multiplier of the packet's airtime (0-2, default 0.5). Higher = fewer collisions but slower delivery.",
   "repeater_directTxDelay": "Direct TX delay",
@@ -1654,7 +1674,7 @@
   "repeater_cliHelpPowersavingOnOff": "Enables or disables powersaving mode (where supported).",
   "repeater_cliHelpErase": "(Serial only) Formats the device file system. Wipes all settings and contacts.",
   "repeater_cliHelpSetDutyCycle": "Sets the maximum allowed transmit duty cycle as a percentage (1-100). Internally adjusts the airtime factor.",
-  "repeater_cliHelpSetPrvKey": "(Serial only) Replaces the device identity private key. Reboot required to apply. Generates a new public key.",
+  "repeater_cliHelpSetPrvKey": "Replaces the device identity private key. Reboot required to apply. Generates a new public key.",
   "repeater_cliHelpSetRadioRxGain": "(SX126x only) Toggles boosted RX gain for improved sensitivity at higher current draw.",
   "repeater_cliHelpSetOwnerInfo": "Sets the owner contact info string included in adverts. Use '|' for newlines.",
   "repeater_cliHelpSetPathHashMode": "Sets the path-hash mode. 0 = legacy, 1 = standard, 2 = strict. Affects how routing paths are matched.",

lib/l10n/app_localizations.dart

@@ -4844,6 +4844,66 @@ abstract class AppLocalizations {
   /// **'Bytes used to encode this repeater\'s ID in flood path/loop-detect tags. 0=1 byte (256 IDs, up to 64 hops), 1=2 bytes (65K IDs, up to 32 hops), 2=3 bytes (16M IDs, up to 21 hops). v1.13 and older firmware drops multi-byte paths — only raise once your network is on v1.14+.'**
   String get repeater_pathHashModeHelper;
 
+  /// No description provided for @repeater_keySettings.
+  ///
+  /// In en, this message translates to:
+  /// **'Change Identity Keys'**
+  String get repeater_keySettings;
+
+  /// No description provided for @repeater_keySettingsSubtitle.
+  ///
+  /// In en, this message translates to:
+  /// **'Change the public/private keypair'**
+  String get repeater_keySettingsSubtitle;
+
+  /// No description provided for @repeater_prvKey.
+  ///
+  /// In en, this message translates to:
+  /// **'Private key'**
+  String get repeater_prvKey;
+
+  /// No description provided for @repeater_prvKeyHelper.
+  ///
+  /// In en, this message translates to:
+  /// **'A new private key for the repeater, a 128-character hex string.'**
+  String get repeater_prvKeyHelper;
+
+  /// No description provided for @repeater_generatePrvKey.
+  ///
+  /// In en, this message translates to:
+  /// **'Generate a random keypair'**
+  String get repeater_generatePrvKey;
+
+  /// No description provided for @repeater_stopGeneratingPrvKey.
+  ///
+  /// In en, this message translates to:
+  /// **'Interrupt search for keypair'**
+  String get repeater_stopGeneratingPrvKey;
+
+  /// No description provided for @repeater_pubKey.
+  ///
+  /// In en, this message translates to:
+  /// **'Public key'**
+  String get repeater_pubKey;
+
+  /// No description provided for @repeater_pubKeyHelper.
+  ///
+  /// In en, this message translates to:
+  /// **'This is the public key that goes with the generated private key. You can\'t set this directly.'**
+  String get repeater_pubKeyHelper;
+
+  /// No description provided for @repeater_pubKeyPrefix.
+  ///
+  /// In en, this message translates to:
+  /// **'Desired prefix'**
+  String get repeater_pubKeyPrefix;
+
+  /// No description provided for @repeater_pubKeyPrefixHelper.
+  ///
+  /// In en, this message translates to:
+  /// **'Find a public key that starts with these hex digits. Expected tries needed: {tries}.'**
+  String repeater_pubKeyPrefixHelper(int tries);
+
   /// No description provided for @repeater_txDelay.
   ///
   /// In en, this message translates to:
@@ -5615,7 +5675,7 @@ abstract class AppLocalizations {
   /// No description provided for @repeater_cliHelpSetPrvKey.
   ///
   /// In en, this message translates to:
-  /// **'(Serial only) Replaces the device identity private key. Reboot required to apply. Generates a new public key.'**
+  /// **'Replaces the device identity private key. Reboot required to apply. Generates a new public key.'**
   String get repeater_cliHelpSetPrvKey;
 
   /// No description provided for @repeater_cliHelpSetRadioRxGain.

lib/l10n/app_localizations_bg.dart

@@ -2707,6 +2707,41 @@ class AppLocalizationsBg extends AppLocalizations {
 
   @override
   String get repeater_txDelay => 'Забавяне на Flood TX';
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
+  @override
 
   @override
   String get repeater_txDelayHelper =>

lib/l10n/app_localizations_de.dart

@@ -2701,6 +2701,41 @@ class AppLocalizationsDe extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Bytes, die zur Kodierung der ID dieses Repeaters in Flood-Pfad-/Schleifen-Erkennung-Tags verwendet werden. 0 = 1 Byte (256 IDs, bis zu 64 Hops), 1 = 2 Bytes (65.000 IDs, bis zu 32 Hops), 2 = 3 Bytes (16 Millionen IDs, bis zu 21 Hops). Firmware-Versionen 1.13 und älter verwenden mehrstellige Pfade – ab Version 1.14+ wird nur ein Pfad erstellt, sobald das Netzwerk aktiv ist.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Flood-TX-Verzögerung';
 

lib/l10n/app_localizations_en.dart

@@ -2655,6 +2655,41 @@ class AppLocalizationsEn extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Bytes used to encode this repeater\'s ID in flood path/loop-detect tags. 0=1 byte (256 IDs, up to 64 hops), 1=2 bytes (65K IDs, up to 32 hops), 2=3 bytes (16M IDs, up to 21 hops). v1.13 and older firmware drops multi-byte paths — only raise once your network is on v1.14+.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Flood TX delay';
 
@@ -3125,7 +3160,7 @@ class AppLocalizationsEn extends AppLocalizations {
 
   @override
   String get repeater_cliHelpSetPrvKey =>
-      '(Serial only) Replaces the device identity private key. Reboot required to apply. Generates a new public key.';
+      'Replaces the device identity private key. Reboot required to apply. Generates a new public key.';
 
   @override
   String get repeater_cliHelpSetRadioRxGain =>

lib/l10n/app_localizations_es.dart

@@ -2700,6 +2700,41 @@ class AppLocalizationsEs extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Bytes utilizados para codificar el ID de este repetidor en las etiquetas de ruta/detección de bucles. 0=1 byte (256 IDs, hasta 64 saltos), 1=2 bytes (65.000 IDs, hasta 32 saltos), 2=3 bytes (16 millones de IDs, hasta 21 saltos). Las versiones 1.13 y anteriores de firmware eliminan rutas de múltiples bytes; solo se detectan una vez que la red está activa en la versión 1.14 o posterior.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Retraso TX por inundación';
 

lib/l10n/app_localizations_fr.dart

@@ -2711,6 +2711,41 @@ class AppLocalizationsFr extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Octets utilisés pour encoder l\'ID de ce routeur dans les balises de détection de flux/boucles. 0 = 1 octet (256 ID, jusqu\'à 64 sauts), 1 = 2 octets (65 000 ID, jusqu\'à 32 sauts), 2 = 3 octets (16 millions d\'ID, jusqu\'à 21 sauts). Les versions 1.13 et antérieures utilisent des chemins multi-octets ; à partir de la version 1.14, cela n\'est plus nécessaire.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Délai de transmission en flood';
 

lib/l10n/app_localizations_hu.dart

@@ -2694,6 +2694,41 @@ class AppLocalizationsHu extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Az átjátszó azonosítójának elárasztási útvonal/hurokészlelési címkékbe való kódolására használt bájtok. 0 = 1 bájt (256 azonosító, legfeljebb 64 ugrás), 1 = 2 bájt (65 000 azonosító, legfeljebb 32 ugrás), 2 = 3 bájt (16 millió azonosító, legfeljebb 21 ugrás). A v1.13 és régebbi firmware eldobja a többbájtos elérési utat – csak akkor emelje meg, ha a hálózat a v1.14+ verziót használja.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Áradási TX késleltetés';
 

lib/l10n/app_localizations_it.dart

@@ -2702,6 +2702,41 @@ class AppLocalizationsIt extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Byte utilizzati per codificare l\'ID di questo ripetitore nei tag per il rilevamento del percorso/loop. 0=1 byte (256 ID, fino a 64 salti), 1=2 byte (65.000 ID, fino a 32 salti), 2=3 byte (16 milioni di ID, fino a 21 salti). Le versioni 1.13 e precedenti utilizzano percorsi multi-byte: è necessario attivare la rete prima di utilizzare questa funzionalità (a partire dalla versione 1.14).';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Ritardo a Flood, TX';
 

lib/l10n/app_localizations_ja.dart

@@ -2583,6 +2583,41 @@ class AppLocalizationsJa extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'このリピータのIDをフローパス/ループ検出タグにエンコードするために使用されるバイト数。 0=1バイト (256個のID、最大64ホップ)、1=2バイト (65,000個のID、最大32ホップ)、2=3バイト (160万個のID、最大21ホップ)。 v1.13およびそれ以前のファームウェアでは、マルチバイトパスがサポートされていません。 v1.14以降のバージョンでは、一度ネットワークが起動されると、パスが一度だけ検出されます。';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'フロイド・TXでの遅延';
 

lib/l10n/app_localizations_ko.dart

@@ -2589,6 +2589,41 @@ class AppLocalizationsKo extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       '이 리피터의 ID를 플러드 경로/루프 감지 태그에 인코딩하는 데 사용되는 바이트 수: 0=1 바이트 (256개의 ID, 최대 64개의 홉), 1=2 바이트 (65,000개의 ID, 최대 32개의 홉), 2=3 바이트 (16백만 개의 ID, 최대 21개의 홉). v1.13 및 이전 버전의 펌웨어는 다중 바이트 경로를 지원하지 않으며, 네트워크가 v1.14 이상으로 업그레이드되면 한 번만 감지합니다.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => '플러드 TX 지연';
 

lib/l10n/app_localizations_nl.dart

@@ -2683,6 +2683,41 @@ class AppLocalizationsNl extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Bytes die gebruikt worden om de ID van deze repeater te coderen in flood-pad/lusdetectietags. 0=1 byte (256 ID\'s, tot 64 hops), 1=2 bytes (65.000 ID\'s, tot 32 hops), 2=3 bytes (16 miljoen ID\'s, tot 21 hops). Versies 1.13 en ouder gebruiken multi-byte paden – alleen na het activeren van het netwerk.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Vertraging bij Flood TX';
 

lib/l10n/app_localizations_pl.dart

@@ -2716,6 +2716,41 @@ class AppLocalizationsPl extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Bity wykorzystywane do kodowania identyfikatora tego urządzenia w tagach ścieżek/detekcji pętli. 0=1 bity (256 identyfikatorów, do 64 skoków), 1=2 bity (65 000 identyfikatorów, do 32 skoków), 2=3 bity (1 600 000 identyfikatorów, do 21 skoków). Wersje 1.13 i wcześniejsze nie obsługują ścieżek wielobitowych – wykrywają tylko jedną, gdy sieć jest w wersji 1.14 lub nowszej.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Opóźnienie w Flood, TX';
 

lib/l10n/app_localizations_pt.dart

@@ -2701,6 +2701,41 @@ class AppLocalizationsPt extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Bytes utilizados para codificar o ID deste repetidor nas tags de caminho/detecção de loop. 0=1 byte (256 IDs, até 64 saltos), 1=2 bytes (65.000 IDs, até 32 saltos), 2=3 bytes (16 milhões de IDs, até 21 saltos). As versões 1.13 e anteriores do firmware não suportam caminhos multi-byte — apenas funcionam uma vez após a ativação da rede (a partir da versão 1.14+).';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Atraso na entrega em Flood, TX';
 

lib/l10n/app_localizations_ru.dart

@@ -2706,6 +2706,41 @@ class AppLocalizationsRu extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Байты, используемые для кодирования идентификатора этого ретранслятора в тегах для обнаружения потоков/циклов. 0 = 1 байт (256 идентификаторов, до 64 переходов), 1 = 2 байта (65 000 идентификаторов, до 32 переходов), 2 = 3 байта (1 600 000 идентификаторов, до 21 перехода). Версии прошивки v1.13 и более ранние версии не поддерживают многобайтовые пути — они поднимаются только после того, как ваша сеть будет обновлена до версии v1.14 и выше.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Задержка в работе системы Flood TX';
 

lib/l10n/app_localizations_sk.dart

@@ -2687,6 +2687,41 @@ class AppLocalizationsSk extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Byty použité na zakódovanie ID tohto opakovača v tagoch pre trasu/detekciu slučky. 0 = 1 bytu (256 ID, až 64 skokov), 1 = 2 byty (65 000 ID, až 32 skokov), 2 = 3 byty (16 miliónov ID, až 21 skokov). Verzie 1.13 a staršie nepodporujú viacbytové trasy – fungujú len, keď je sieť aktivovaná.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Zpoždanie v Flood, TX';
 

lib/l10n/app_localizations_sl.dart

@@ -2683,6 +2683,41 @@ class AppLocalizationsSl extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Biti, ki so bila uporabljena za kodiranje ID-ja tega releja v oznakah za zaznavanje pot/kroga, imajo naslednje velikosti: 0=1 bit (256 ID-jev, do 64 skokov), 1=2 biti (65.000 ID-jev, do 32 skokov), 2=3 biti (16 milijonov ID-jev, do 21 skokov). V različicah 1.13 in starejših se ustvarjajo večbitne poti – vendar se to zgodi šele, ko je omrežje vklopljeno v različicah 1.14 in kasnejših.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Zatemnitevanje zaradi poplav v Texasu';
 

lib/l10n/app_localizations_sv.dart

@@ -2671,6 +2671,41 @@ class AppLocalizationsSv extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Byte används för att koda denna repeaters ID i taggar för att upptäcka loopar/flödesvägar. 0=1 byte (256 ID:n, upp till 64 hopp), 1=2 byte (65 000 ID:n, upp till 32 hopp), 2=3 byte (16 miljoner ID:n, upp till 21 hopp). Versioner 1.13 och äldre har stöd för multi-byte-vägar – endast en gång när nätverket är aktiverat (från och med version 1.14).';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Försening i Flood TX';
 

lib/l10n/app_localizations_uk.dart

@@ -2703,6 +2703,41 @@ class AppLocalizationsUk extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       'Байти, що використовуються для кодування ідентифікатора цього ретранслятора в тегах для виявлення потоків/петлі. 0=1 байт (256 ідентифікаторів, до 64 перехідів), 1=2 байти (65 000 ідентифікаторів, до 32 перехідів), 2=3 байти (16 мільйонів ідентифікаторів, до 21 переходу). Версії 1.13 та старіші не підтримують багатобайтні шляхи — вони активуються лише після того, як мережа буде оновлена до версії 1.14+.';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => 'Затримка у Flood, штат Техас';
 

lib/l10n/app_localizations_zh.dart

@@ -2558,6 +2558,41 @@ class AppLocalizationsZh extends AppLocalizations {
   String get repeater_pathHashModeHelper =>
       '用于编码此复用器的 ID 的字节数，在“洪流路径/环检测”标签中使用。 0=1 字节（256 个 ID，最多 64 个跳跃），1=2 字节（65K 个 ID，最多 32 个跳跃），2=3 字节（16M 个 ID，最多 21 个跳跃）。 v1.13 及更早版本的固件会使用多字节路径——只有在您的网络升级到 v1.14 或更高版本后才会生效。';
 
+  @override
+  String get repeater_keySettings => 'Change Identity Keys';
+
+  @override
+  String get repeater_keySettingsSubtitle =>
+      'Change the public/private keypair';
+
+  @override
+  String get repeater_prvKey => 'Private key';
+
+  @override
+  String get repeater_prvKeyHelper =>
+      'A new private key for the repeater, a 128-character hex string.';
+
+  @override
+  String get repeater_generatePrvKey => 'Generate a random keypair';
+
+  @override
+  String get repeater_stopGeneratingPrvKey => 'Interrupt search for keypair';
+
+  @override
+  String get repeater_pubKey => 'Public key';
+
+  @override
+  String get repeater_pubKeyHelper =>
+      'This is the public key that goes with the generated private key. You can\'t set this directly.';
+
+  @override
+  String get repeater_pubKeyPrefix => 'Desired prefix';
+
+  @override
+  String repeater_pubKeyPrefixHelper(int tries) {
+    return 'Find a public key that starts with these hex digits. Expected tries needed: $tries.';
+  }
+
   @override
   String get repeater_txDelay => '洪水（德克萨斯州）延误';