Merge remote-tracking branch 'origin/main'

Update version in pubspec.yaml to 9.5.0+16

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+github: [zjs81]
+custom:
+  - "https://paypal.me/zjs82"

.gitignore

@@ -33,6 +33,9 @@ migrate_working_dir/
 pubspec.lock
 /build/
 /coverage/
+# fvm project files
+.fvm/
+.fvmrc
 
 # Symbolication related
 app.*.symbols
@@ -58,6 +61,7 @@ secrets.dart
 .DS_Store
 .AppleDouble
 .LSOverride
+macos/Flutter/GeneratedPluginRegistrant.swift
 
 # iOS
 **/ios/Pods/
@@ -83,6 +87,10 @@ keystore.properties
 # IDE
 .vscode/launch.json
 .vscode/settings.json
+.contextstream/
 
 # Cloudflare Wrangler
 .wrangler
+
+# Claude Code local working dir (worktrees, jobs, settings)
+.claude/

AGENTS.md

@@ -6,7 +6,7 @@
 
 ## BLE Frames & Protocol Notes
 - Nordic UART Service (NUS) UUIDs: Service `6e400001-b5a3-f393-e0a9-e50e24dcca9e`, RX `6e400002-b5a3-f393-e0a9-e50e24dcca9e`, TX `6e400003-b5a3-f393-e0a9-e50e24dcca9e`.
-- Discovery: scans for device name prefix `MeshCore-` and filters by `platformName`/`advertisementData.advName`.
+- Discovery: scans for device names matching known prefixes and filters by `platformName`/`advertisementData.advName`.
 - Frames are capped at `maxFrameSize = 172` bytes; byte 0 is the command/response/push code. I/O is `MeshCoreConnector.sendFrame` and `MeshCoreConnector.receivedFrames`.
 - Command codes (to device): `cmdAppStart`=1, `cmdSendTxtMsg`=2, `cmdSendChannelTxtMsg`=3, `cmdGetContacts`=4, `cmdGetDeviceTime`=5, `cmdSetDeviceTime`=6, `cmdSendSelfAdvert`=7, `cmdSetAdvertName`=8, `cmdAddUpdateContact`=9, `cmdSyncNextMessage`=10, `cmdSetRadioParams`=11, `cmdSetRadioTxPower`=12, `cmdResetPath`=13, `cmdSetAdvertLatLon`=14, `cmdRemoveContact`=15, `cmdShareContact`=16, `cmdExportContact`=17, `cmdImportContact`=18, `cmdReboot`=19, `cmdSendLogin`=26, `cmdGetChannel`=31, `cmdSetChannel`=32, `cmdGetRadioSettings`=57.
 - Response codes (from device): `respCodeOk`=0, `respCodeErr`=1, `respCodeContactsStart`=2, `respCodeContact`=3, `respCodeEndOfContacts`=4, `respCodeSelfInfo`=5, `respCodeSent`=6, `respCodeContactMsgRecv`=7, `respCodeChannelMsgRecv`=8, `respCodeCurrTime`=9, `respCodeNoMoreMessages`=10, `respCodeContactMsgRecvV3`=16, `respCodeChannelMsgRecvV3`=17, `respCodeChannelInfo`=18, `respCodeRadioSettings`=25.

CLAUDE.md

@@ -1,6 +1,6 @@
 # MeshCore Open - Flutter Client
 
-Open-source Flutter client for MeshCore LoRa mesh networking devices.
+Open-source Flutter client for MeshCore LoRa mesh networking devices. Connects to MeshCore-compatible radios over **BLE, TCP, or USB serial** and provides direct/channel chat, contact and channel management, on-map node tracking, repeater administration, and on-device message translation.
 
 ## Build Commands
 
@@ -17,6 +17,9 @@ Open-source Flutter client for MeshCore LoRa mesh networking devices.
 # Build iOS
 ~/flutter/bin/flutter build ios
 
+# Build versioned web release (uses build_pipe)
+~/flutter/bin/dart run build_pipe
+
 # Run static analysis
 ~/flutter/bin/flutter analyze
 
@@ -28,43 +31,132 @@ Open-source Flutter client for MeshCore LoRa mesh networking devices.
 
 ```
 lib/
-├── main.dart                    # App entry point, MaterialApp setup with Provider
-├── connector/
-│   └── meshcore_connector.dart  # BLE communication layer (MeshCoreConnector)
-├── screens/
-│   ├── scanner_screen.dart      # BLE device scanning (home screen)
-│   ├── device_screen.dart       # Connected device hub with navigation
-│   ├── chat_screen.dart         # Chat interface (placeholder)
-│   ├── contacts_screen.dart     # Contacts list (placeholder)
-│   └── settings_screen.dart     # Device info and app settings
-└── widgets/
-    └── device_tile.dart         # Device list item with signal strength
+├── main.dart        # Entry point: MultiProvider wiring, locale + theme, initial route
+├── connector/       # Unified BLE/TCP/USB transport layer
+│   ├── meshcore_connector.dart       # Central state holder + ChangeNotifier (all transports)
+│   ├── meshcore_connector_tcp.dart   # TCP transport helper
+│   ├── meshcore_connector_usb.dart   # USB serial transport helper
+│   ├── meshcore_protocol.dart        # Frame size + version constants
+│   └── meshcore_uuids.dart           # Nordic UART UUIDs + scan name prefixes
+├── models/          # Plain data classes (Contact, Channel, Message, Community, …)
+├── services/        # ChangeNotifier services + IO services (retry, translation, ML, …)
+├── storage/         # SharedPreferences-backed stores, scoped per device key
+├── helpers/         # Pure utilities (Smaz compression, GIF parsing, scroll helpers, path hop resolution)
+├── utils/           # Platform / IO / UX utilities (logger, GPX export, dialogs)
+├── theme/           # MeshPalette (defined, not yet wired in main.dart)
+├── l10n/            # ARB localization for 18 locales
+├── icons/           # Custom icon widgets
+├── widgets/         # Reusable widgets (AppBar, BatteryUi, QR, jump-to-bottom, …)
+└── screens/         # ~26 screens — see Screens section below
 ```
 
+## Screens
+
+All screens are fully implemented (no remaining placeholders).
+
+### Connection / Scanning
+| Screen | Purpose |
+|---|---|
+| `scanner_screen.dart` | BLE device scan and connect — main entry point |
+| `tcp_screen.dart` | Connect to a MeshCore device over TCP/IP |
+| `usb_screen.dart` | Connect to a MeshCore device over USB serial |
+| `discovery_screen.dart` | Browse all discovered (non-contact) mesh nodes |
+| `chrome_required_screen.dart` | Web gate for non-Chrome browsers (BLE unavailable) |
+
+### Chat / Messaging
+| Screen | Purpose |
+|---|---|
+| `chat_screen.dart` | Direct (private) messaging with a contact |
+| `channel_chat_screen.dart` | Group messaging inside a named channel |
+| `channels_screen.dart` | List and manage channels (add/edit/delete) |
+| `channel_message_path_screen.dart` | Hop-by-hop route a channel message took, with map overlay |
+
+### Contacts / Neighbors
+| Screen | Purpose |
+|---|---|
+| `contacts_screen.dart` | Full contacts list with previews and management |
+| `neighbors_screen.dart` | Nodes directly heard by the connected radio (one-hop) |
+
+### Repeater Management
+| Screen | Purpose |
+|---|---|
+| `repeater_hub_screen.dart` | Top-level repeater hub; navigates to sub-screens |
+| `repeater_status_screen.dart` | Live status of a managed repeater node |
+| `repeater_cli_screen.dart` | Raw command-line interface to a repeater |
+| `repeater_settings_screen.dart` | Full radio/node settings editor for a repeater |
+
+### Map / Location
+| Screen | Purpose |
+|---|---|
+| `map_screen.dart` | Main map view of contacts/nodes with live GPS positions |
+| `line_of_sight_map_screen.dart` | Terrain LOS analysis between configurable endpoints |
+| `path_trace_map.dart` | Animates the hop path a direct message traveled |
+| `map_cache_screen.dart` | Download/clear offline map tile cache |
+| `community_qr_scanner_screen.dart` | Scan QR to join a mesh community/channel |
+
+### Settings / Debug / Diagnostics
+| Screen | Purpose |
+|---|---|
+| `settings_screen.dart` | Connected device settings: radio params, identity, GPS |
+| `app_settings_screen.dart` | App preferences: theme, units, map source, notifications |
+| `app_debug_log_screen.dart` | In-app log viewer (app-layer messages) |
+| `ble_debug_log_screen.dart` | In-app log viewer (raw BLE frame traffic) |
+| `companion_radio_stats_screen.dart` | RF stats (RSSI, SNR, packet counts) for paired radio |
+| `telemetry_screen.dart` | Battery / sensor / environmental telemetry for a contact |
+
 ## Architecture
 
 ### State Management
-- **Provider** with `ChangeNotifier` pattern
-- `MeshCoreConnector` is the central state holder for BLE connection
-- Screens use `Consumer<MeshCoreConnector>` for reactive UI updates
+
+`Provider` with `ChangeNotifier`. `main.dart` wires a `MultiProvider` with the following:
+
+| Provider | Role |
+|---|---|
+| `MeshCoreConnector` | Active transport (BLE/TCP/USB), connection state, frame I/O |
+| `MessageRetryService` | ACK tracking and retry scheduling with backoff |
+| `PathHistoryService` | Per-contact routing history (LRU cache, 50 contacts) |
+| `AppSettingsService` | App preferences (theme, units, locale, notifications) |
+| `BleDebugLogService` | Raw BLE frame log buffer |
+| `AppDebugLogService` | Structured app log buffer |
+| `ChatTextScaleService` | Pinch-to-zoom text scale for chat screens |
+| `TranslationService` | On-device LLM translation (llamadart) |
+| `UiViewStateService` | Contacts/channels sort/filter/search state |
+| `TimeoutPredictionService` | ML linear regression for ACK timeout prediction |
+| `StorageService` | Path history + delivery observation persistence |
+| `MapTileCacheService` | OSM tile pre-cache |
+
+Screens consume these via `Consumer<T>` (or `context.watch<T>()` / `context.read<T>()`) for reactive UI.
+
+### Storage / Persistence
+
+All stores in `lib/storage/` use `PrefsManager` (a `SharedPreferences` singleton initialized in `main()`). Most stores **scope keys by the first 10 hex chars of the connected device's public key**, so per-radio data is isolated.
+
+| Store | Persists |
+|---|---|
+| `message_store`, `channel_message_store` | Direct + channel messages |
+| `contact_store`, `contact_discovery_store` | Known + discovered contacts |
+| `channel_store`, `channel_order_store`, `channel_settings_store` | Channels, display order, per-channel Smaz toggle |
+| `community_store` | Communities (32-byte shared secrets) |
+| `contact_group_store`, `contact_settings_store` | Groups, per-contact Smaz toggle |
+| `unread_store` | Per-contact unread counts (debounced writes) |
+
+GGUF translation models are stored as files (not SharedPreferences) via `translation_file_store`.
 
 ### Theming
 - Material 3 design (`useMaterial3: true`)
 - System-based dark/light mode (`ThemeMode.system`)
 - Blue color scheme seed
+- `lib/theme/mesh_theme.dart` defines a warm-dark `MeshPalette` (phosphor-green accents) but is **not currently wired** in `main.dart` — available for a future redesign
 
-## BLE Protocol
+### Localization
 
-### Nordic UART Service (NUS)
-- **Service UUID**: `6e400001-b5a3-f393-e0a9-e50e24dcca9e`
-- **RX Characteristic**: `6e400002-b5a3-f393-e0a9-e50e24dcca9e` (Write to device)
-- **TX Characteristic**: `6e400003-b5a3-f393-e0a9-e50e24dcca9e` (Notify from device)
+18 locales supported via Flutter's standard ARB pipeline (`lib/l10n/`): en, de, es, fr, it, pt, ru, uk, bg, hu, ja, ko, nl, pl, sk, sl, sv, zh. Language override comes from `AppSettingsService.settings.languageOverride`. Use the `context.l10n` extension (`lib/l10n/l10n.dart`) for translated strings; contact-type names live in `contact_localization.dart`.
 
-### Device Discovery
-- Scans for devices with name prefix `MeshCore-`
-- Filters by `platformName` or `advertisementData.advName`
+## Transports
 
-### Connection States
+`MeshCoreConnector` unifies all three transports under one `ChangeNotifier`. There is **no shared base class** — selection is via the `MeshCoreTransportType { bluetooth, usb, tcp }` enum, and BLE/TCP/USB share the same connection-state enum, send/receive API, and frame protocol.
+
+### Connection State
 ```dart
 enum MeshCoreConnectionState {
   disconnected,
@@ -75,28 +167,137 @@ enum MeshCoreConnectionState {
 }
 ```
 
-### Frame I/O
-- **Send**: `MeshCoreConnector.sendFrame(Uint8List data)`
-- **Receive**: `MeshCoreConnector.receivedFrames` stream of `Uint8List`
+### Frame I/O (all transports)
+- **Send**: `MeshCoreConnector.sendFrame(Uint8List data, {String? channelSendQueueId, bool expectsGenericAck})`
+- **Receive**: `Stream<Uint8List> get receivedFrames`
+- **Protocol constants** (`meshcore_protocol.dart`): `maxFrameSize = 172`, `maxTextPayloadBytes = 160`, `appProtocolVersion = 4`
+
+### BLE — Nordic UART Service (NUS)
+- **Service UUID**: `6e400001-b5a3-f393-e0a9-e50e24dcca9e`
+- **RX Characteristic** (write to device): `6e400002-b5a3-f393-e0a9-e50e24dcca9e`
+- **TX Characteristic** (notify from device): `6e400003-b5a3-f393-e0a9-e50e24dcca9e`
+- **Discovery**: scans for devices whose name starts with `MeshCore-`, `Whisper-`, `WisCore-`, `Seeed`, `Lilygo`, `HT-`, or `LowMesh_MC_` (filters on both `platformName` and `advertisementData.advName`)
+- **Linux**: `linux_ble_pairing_service.dart` falls back to `bluetoothctl` when BlueZ agent prompts fail
+
+### TCP
+- Manual host/port entry, persisted via `AppSettingsService` (`tcpServerAddress`, `tcpServerPort`)
+- UI hint: `192.168.40.10` / port `5000`
+- Disabled on web (`PlatformInfo.isWeb`)
+- API: `MeshCoreConnector.connectTcp(host: ..., port: ...)`
+
+### USB Serial (flserial)
+- Default baud rate: `115200`
+- Port enumeration: `MeshCoreConnector.listUsbPorts()`
+- COBS-framed packets via `usb_serial_frame_codec.dart`
+- macOS device-name resolution via `ioreg` (`utils/macos_usb_device_names.dart`)
+- API: `MeshCoreConnector.connectUsb(portName: ..., baudRate: 115200)`
 
 ## Dependencies
 
+App version: `9.5.0+13` — Dart SDK constraint: `^3.9.2`
+
+**Connectivity**
+
 | Package | Version | Purpose |
 |---------|---------|---------|
-| flutter_blue_plus | ^2.1.0 | BLE communication |
-| provider | ^6.1.5+1 | State management |
-| cupertino_icons | ^1.0.8 | iOS-style icons |
+| flutter_blue_plus | ^2.1.0 | BLE scanning, connecting, and UART data transfer |
+| flutter_blue_plus_platform_interface | ^9.0.2 | Platform-interface layer required by flutter_blue_plus |
+| flserial | git (MeshEnvy fork) | USB serial transport for wired device connections (TODO: upstream pending) |
+
+**State / Storage**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| provider | ^6.1.5+1 | ChangeNotifier-based state management across screens |
+| shared_preferences | ^2.2.2 | Persistent key-value storage for user settings |
+| path_provider | ^2.1.5 | Locates platform-appropriate directories for file I/O |
+
+**Crypto**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| crypto | ^3.0.3 | SHA/HMAC hashing used in message authentication |
+| pointycastle | ^4.0.0 | AES encryption/decryption for channel and direct messages |
+| uuid | ^4.3.3 | Generates UUIDs for message and contact identity |
+
+**Maps & Location**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| flutter_map | ^8.2.2 | Interactive tile map for node positions and path traces |
+| latlong2 | ^0.9.1 | LatLng coordinate type used throughout map and GPS code |
+| gpx | ^2.3.0 | Export node paths as GPX track files |
+
+**UI**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| material_symbols_icons | ^4.2928.1 | Extended Material Symbols icon set (line-of-sight, etc.) |
+| flutter_svg | ^2.0.10+1 | Renders SVG assets (custom icons such as LoS indicator) |
+| cached_network_image | ^3.4.1 | Caches map tile images downloaded over the network |
+| flutter_cache_manager | ^3.4.1 | Underlying cache manager used by cached_network_image |
+| flutter_linkify | ^6.0.0 | Auto-detects and makes URLs tappable in chat messages |
+| mobile_scanner | ^7.1.4 | QR/barcode scanning for contact and channel import |
+| qr_flutter | ^4.1.0 | Generates QR codes for sharing contacts and channels |
+| cupertino_icons | ^1.0.8 | iOS-style icon font (bundled for completeness) |
+| characters | ^1.4.0 | Unicode-aware string operations for message text handling |
+
+**Notifications / Background**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| flutter_local_notifications | ^22.0.0 | Shows local push notifications for incoming messages |
+| flutter_foreground_task | ^9.2.0 | Keeps the app alive in background to maintain BLE/USB connection |
+
+**ML / AI**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| ml_algo | ^16.0.0 | OLS regression used in `timeout_prediction_service.dart` to predict message ACK timeouts |
+| ml_dataframe | ^1.0.0 | DataFrame input format required by ml_algo |
+| llamadart | ^0.8.0 | On-device LLM inference used in `translation_service.dart` for message translation |
+| flutter_langdetect | ^0.0.1 | Detects a message's source language in `translation_service.dart` before translating |
+
+**Misc**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| http | ^1.2.0 | Fetches tile URLs and any remote API calls |
+| url_launcher | ^6.3.0 | Opens URLs in the system browser from linkified chat text |
+| share_plus | ^13.1.0 | Shares files (e.g. exported GPX tracks) via the system share sheet |
+| package_info_plus | ^10.1.0 | Reads app version/build number displayed in settings |
+| web | ^1.1.1 | Web-platform APIs for USB serial and browser detection on Flutter Web |
+| intl | any | Internationalization and locale formatting (required by flutter_localizations) |
+| build_pipe | ^0.3.1 | CI/CD build pipeline configuration (web release builds with versioned assets) |
 
 ## Platform Configuration
 
 ### Android (`android/app/src/main/AndroidManifest.xml`)
-- `BLUETOOTH`, `BLUETOOTH_ADMIN` (API 30 and below)
-- `BLUETOOTH_SCAN`, `BLUETOOTH_CONNECT`, `BLUETOOTH_ADVERTISE` (API 31+)
-- `ACCESS_FINE_LOCATION`, `ACCESS_COARSE_LOCATION` (for BLE scanning)
+- `INTERNET` (map tiles, translation model downloads)
+- `BLUETOOTH`, `BLUETOOTH_ADMIN` (API ≤ 30)
+- `BLUETOOTH_SCAN` (with `neverForLocation`), `BLUETOOTH_CONNECT`, `BLUETOOTH_ADVERTISE` (API 31+)
+- `ACCESS_FINE_LOCATION`, `ACCESS_COARSE_LOCATION` (BLE scanning on API ≤ 30)
+- `POST_NOTIFICATIONS` (API 33+)
+- `FOREGROUND_SERVICE`, `FOREGROUND_SERVICE_CONNECTED_DEVICE` (background BLE/USB connection)
+- `WAKE_LOCK`
+- `CAMERA` (QR scanning, declared as optional feature)
+- USB host hardware feature (optional)
+
+`flutter_foreground_task` registers a `ForegroundService` with `foregroundServiceType="connectedDevice"` and `stopWithTask="false"`.
+
+**Build config (`android/app/build.gradle.kts`)**: `applicationId = com.meshcore.meshcore_open`, NDK `29.0.14206865`, Java 8 core-library desugaring (`desugar_jdk_libs:2.1.4`), release signing via `key.properties` (debug fallback).
 
 ### iOS (`ios/Runner/Info.plist`)
-- `NSBluetoothAlwaysUsageDescription`
-- `NSBluetoothPeripheralUsageDescription`
+- `NSBluetoothAlwaysUsageDescription`, `NSBluetoothPeripheralUsageDescription`
+- `NSCameraUsageDescription` (QR scanning to join communities)
+- Background modes: `bluetooth-central`
+- `LSApplicationQueriesSchemes`: `http`, `https`
+
+### Web (`web/`)
+PWA scaffold present but boilerplate (`manifest.json` and `index.html` are unmodified Flutter defaults). BLE is unsupported in browsers; TCP and Web Serial USB may work in Chrome only. `ChromeRequiredScreen` gates non-Chrome web users. Versioned releases are produced via `build_pipe` (`?v=<pubspec version>` cache busting, no service worker).
+
+### Desktop
+`linux/`, `windows/`, and `macos/` directories are present as Flutter scaffolds. No app-specific native config has been added; BLE on desktop has not been validated.
 
 ## Coding Conventions
 
@@ -123,14 +324,14 @@ enum MeshCoreConnectionState {
 
 | File | Purpose |
 |------|---------|
-| `lib/connector/meshcore_connector.dart` | All BLE logic - scanning, connecting, data transfer |
-| `lib/screens/scanner_screen.dart` | Entry point UI, device list |
-| `lib/main.dart` | App configuration, theme, Provider setup |
-| `pubspec.yaml` | Dependencies and project metadata |
-
-## Placeholder Screens
-
-The following screens are implemented as placeholders and need full implementation:
-- `chat_screen.dart` - Mesh chat functionality
-- `contacts_screen.dart` - Contact management
-- `settings_screen.dart` - Radio settings, node identity, location (partially implemented)
+| `lib/main.dart` | App configuration, MultiProvider setup, theme, locale, initial route |
+| `lib/connector/meshcore_connector.dart` | Unified BLE/TCP/USB transport state holder |
+| `lib/connector/meshcore_protocol.dart` | Frame size limits and protocol version |
+| `lib/connector/meshcore_uuids.dart` | NUS UUIDs and BLE scan name prefixes |
+| `lib/services/app_settings_service.dart` | App-wide settings (`AppSettings` JSON in SharedPreferences) |
+| `lib/services/storage_service.dart` | Path history + delivery observation persistence |
+| `lib/services/message_retry_service.dart` | ACK tracking + retry scheduling |
+| `lib/services/translation_service.dart` | On-device LLM translation (llamadart) |
+| `lib/storage/prefs_manager.dart` | SharedPreferences singleton initialized in `main()` |
+| `lib/screens/scanner_screen.dart` | Home screen — BLE scan and connect |
+| `pubspec.yaml` | Dependencies and project metadata (current version `9.5.0+13`) |

CONTRIBUTING.md

@@ -0,0 +1,71 @@
+# How to contribute to Meshcore Open
+
+Before submitting any pull requests (PR), please review the following information.
+
+Unsolicited PRs without previous discussion or open issues may be
+rejected. As may changes that are too broad (i.e. 100 files changed) or that
+cover too many separate changes. If the changes are clearly AI generated they
+may also be rejected. [See more](#ai-use)
+
+## First Step Checklist
+
+### **Did you find a bug?**
+
+* **Ensure the bug was not already reported** by searching on GitHub under [Issues](https://github.com/zjs81/meshcore-open/issues).
+
+* If you're unable to find an open issue addressing the problem, [open a new one](https://github.com/zjs81/meshcore-open/issues/new).
+Be sure to include a **title and clear description**, as much relevant
+information as possible, and a **code sample** or an **executable test case**
+demonstrating the expected behavior that is not occurring. You can also include
+screenshots or video.
+
+* DO NOT start work and submit a PR at this time, please discuss the issue and
+your implementation plan first.
+
+### **Did you fix whitespace, format code, or make a purely cosmetic patch?**
+
+Changes that are cosmetic in nature and do not add anything substantial to the
+stability, functionality, or testability of the application will generally not
+be accepted.
+
+### **Do you intend to add a new feature or change an existing one?**
+
+* Suggest your change in a new issue as a feature request.
+
+* DO NOT start work and submit a PR at this time, please discuss the change and
+your implementation plan first.
+
+* After it is generally decided that the feature or change fits the goals of the
+project you can start work or open a PR if you have already started.
+
+## Submitting your patch
+
+* All changes should be based on the `dev` branch. When creating your PR please
+be sure to change the target to merge into dev, and when starting work on a new
+branch be sure to start on latest `dev`.
+
+* Ensure the PR description clearly describes the problem and solution. Include
+the relevant issue number if applicable.
+
+* The PR should contain **one commit** only, the commit message should have a
+clear title followed by a new line and then brief description if needed. PR with
+multiple commits will be squashed into one before merging if required. See
+[Git Mastery](https://git-mastery.org/lessons/commitMessage/) for more
+information on good commit messages.
+
+* **Before committing changes** on your branch, be sure to run both
+`dart format .` and `flutter analyze`. The continuous development checks will
+fail if issues here are not addressed before hand.
+
+## AI-use
+
+Everyone loves some help, AI agents are a tool in many of our belts. The project
+is not anti-AI.
+
+There are some limits to acceptable use however. Generally:
+
+* All code generated by AI should be thoroughly reviewed by the contributor.
+* The changes should be tightly controlled to not change anything out of scope
+for the patch, bug fix, etc.
+* The contributor should have a good understanding of what the code does and how
+the application works in order to effectively be able to manage the agent.

README.md

@@ -6,6 +6,8 @@ Open-source Flutter client for MeshCore LoRa mesh networking devices.
 
 MeshCore Open is a cross-platform mobile application for communicating with MeshCore LoRa mesh network devices via Bluetooth Low Energy (BLE). The app enables long-range, off-grid communication through peer-to-peer messaging, public channels, and mesh networking capabilities.
 
+**Website:** [meshcoreopen.org](https://meshcoreopen.org/)
+
 <a href="http://apps.obtainium.imranr.dev/redirect.html?r=obtainium://add/https://github.com/zjs81/meshcore-open">
         <img src="assets/badges/badge_obtainium.png" height="80" align="center" alt="Get it on Obtainium"/>
 </a>
@@ -46,7 +48,7 @@ MeshCore Open is a cross-platform mobile application for communicating with Mesh
 - **Live Map View**: Real-time visualization of mesh network nodes on an interactive map
 - **Node Filtering**: Filter by node type (chat, repeater, sensor) and time range
 - **Location Sharing**: Share GPS coordinates and custom markers with contacts
-- **Offline Maps**: Download map tiles for offline use in remote areas
+- **Offline Maps**: Download map tiles for offline use in remote areas (with [StadiaMaps](https://stadiamaps.com/pricing/) Free Subscription API-Key)
 - **MGRS Coordinates**: Support for Military Grid Reference System coordinate format
 
 ### Device Management
@@ -92,12 +94,12 @@ MeshCore Open is a cross-platform mobile application for communicating with Mesh
 |---------|---------|
 | flutter_blue_plus | Bluetooth Low Energy communication |
 | provider | State management |
-| sqflite | Local database storage |
+| shared_preferences | Local key-value storage (scoped per device) |
 | flutter_map | Interactive map display |
 | latlong2 | Geographic coordinate handling |
 | flutter_local_notifications | Background notification support |
-| smaz | Message compression |
 | pointycastle | Cryptographic operations |
+| llamadart | On-device LLM message translation |
 | intl | Internationalization and date formatting |
 
 ## Getting Started
@@ -150,7 +152,8 @@ lib/
 ├── main.dart                    # App entry point
 ├── connector/
 │   ├── meshcore_connector.dart  # BLE communication & state management
-│   └── meshcore_protocol.dart   # Protocol definitions & frame parsing
+│   ├── meshcore_protocol.dart   # Protocol definitions & frame parsing
+│   └── meshcore_uuids.dart      # Device names and IDs (add prefixes here!)
 ├── screens/
 │   ├── scanner_screen.dart      # Device scanning (home screen)
 │   ├── contacts_screen.dart     # Contact list
@@ -184,7 +187,16 @@ lib/
 
 ### Device Discovery
 
-Devices are discovered by scanning for BLE advertisements with the name prefix `MeshCore-`
+Devices are discovered by scanning for BLE advertisements with known MeshCore device name prefixes. These are currently:
+    - `MeshCore-`
+    - `Whisper-`
+    - `WisCore-`
+    - `HT-`
+    - `LowMesh_MC_`
+    - `NRF52`
+
+New device prefixes can be added in `lib/connector/meshcore_uuids.dart`.
+
 
 ### Message Format
 
@@ -212,6 +224,10 @@ Messages are transmitted as binary frames using a custom protocol optimized for
 
 This is an open-source project. Contributions are welcome!
 
+## SWHID and Archive badge
+[![SWH](https://archive.softwareheritage.org/badge/origin/https://github.com/zjs81/meshcore-open/)](https://archive.softwareheritage.org/browse/origin/?origin_url=https://github.com/zjs81/meshcore-open)
+[![SWH](https://archive.softwareheritage.org/badge/swh:1:dir:d37a80b06359730864150ad2aeadd46cce9abd55/)](https://archive.softwareheritage.org/swh:1:dir:d37a80b06359730864150ad2aeadd46cce9abd55;origin=https://github.com/zjs81/meshcore-open;visit=swh:1:snp:47656c4b55ab40a689ff8d2f045196725f05096b;anchor=swh:1:rev:0fe250230905fdd05dbedc0f546736990beacf53)
+
 ### Development Guidelines
 
 - Follow the Flutter style guide

android/app/build.gradle.kts

@@ -43,9 +43,22 @@ android {
         //         arguments += listOf("-DANDROID_STL=c++_shared")
         //     }
         // }
-        // ndk {
-        //     abiFilters += listOf("armeabi-v7a", "arm64-v8a", "x86_64")
-        // }
+        // arm64-v8a only, deliberately.
+        //
+        //  * ONNX Runtime (flutter_onnxruntime, used by the AEIC-SE image codec)
+        //    ships a per-ABI .so. arm64-v8a alone costs ~18 MB of APK; a
+        //    universal APK carrying armeabi-v7a and x86_64 as well costs ~56 MB.
+        //  * llamadart only declares android-arm64 and android-x64 backends in
+        //    pubspec.yaml's `hooks.user_defines`, so an armeabi-v7a build already
+        //    has no translation backend at all.
+        //  * The image codec needs ~2.7 GiB peak resident, which no 32-bit
+        //    address space can provide regardless of ABI.
+        //
+        // Consequence: this APK will not install on 32-bit-only ARM devices or on
+        // x86_64 emulators. For emulator work, temporarily add "x86_64" here.
+        ndk {
+            abiFilters += listOf("arm64-v8a")
+        }
     }
 
     signingConfigs {
@@ -67,6 +80,13 @@ android {
             } else {
                 signingConfigs.getByName("debug")
             }
+            // ONNX Runtime resolves its Java classes from native code by name.
+            // Without these rules R8 renames them and the process SIGABRTs with
+            // "java_class == null" the instant the codec runs a model.
+            proguardFiles(
+                getDefaultProguardFile("proguard-android-optimize.txt"),
+                "proguard-rules.pro",
+            )
         }
     }
 

android/app/proguard-rules.pro

@@ -0,0 +1,19 @@
+# ONNX Runtime looks its Java classes up from native code with FindClass /
+# GetMethodID, by literal name. R8 renames them, the lookup returns null, and
+# the process dies with:
+#
+#   JNI DETECTED ERROR IN APPLICATION: java_class == null
+#     at art::JNI<false>::GetMethodID
+#     from convertToTensorInfo -> Java_ai_onnxruntime_OrtSession_run
+#
+# It is a hard SIGABRT in native code, so nothing in Dart can catch it: the app
+# vanishes the moment the codec touches the model. Keep the whole package —
+# these are the types the native layer reflects on to build tensors and read
+# results back.
+-keep class ai.onnxruntime.** { *; }
+-keepclassmembers class ai.onnxruntime.** { *; }
+-dontwarn ai.onnxruntime.**
+
+# The Flutter plugin's platform-channel handler, reached the same way.
+-keep class com.masicai.flutteronnxruntime.** { *; }
+-dontwarn com.masicai.flutteronnxruntime.**

android/app/src/main/AndroidManifest.xml

@@ -22,7 +22,7 @@
     <uses-feature android:name="android.hardware.usb.host" android:required="false"/>
 
     <application
-        android:label="meshcore_open"
+        android:label="MeshCore Open"
         android:name="${applicationName}"
         android:icon="@mipmap/ic_launcher">
         <service

android/app/src/main/res/mipmap-anydpi-v26/ic_launcher.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<adaptive-icon xmlns:android="http://schemas.android.com/apk/res/android">
+  <background android:drawable="@color/ic_launcher_background"/>
+  <foreground>
+      <inset
+          android:drawable="@drawable/ic_launcher_foreground"
+          android:inset="16%" />
+  </foreground>
+</adaptive-icon>

android/app/src/main/res/values/colors.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+    <color name="ic_launcher_background">#9F9D95</color>
+</resources>

android/gradle.properties

@@ -1,3 +1,7 @@
 org.gradle.jvmargs=-Xmx8G -XX:MaxMetaspaceSize=4G -XX:ReservedCodeCacheSize=512m -XX:+HeapDumpOnOutOfMemoryError
 android.useAndroidX=true
 android.enableJetifier=true
+# This builtInKotlin flag was added automatically by Flutter migrator
+android.builtInKotlin=false
+# This newDsl flag was added automatically by Flutter migrator
+android.newDsl=false

assets/fonts/Inter-OFL.txt

@@ -0,0 +1,93 @@
+Copyright 2020 The Inter Project Authors (https://github.com/rsms/inter)
+
+This Font Software is licensed under the SIL Open Font License, Version 1.1.
+This license is copied below, and is also available with a FAQ at:
+https://scripts.sil.org/OFL
+
+
+-----------------------------------------------------------
+SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
+-----------------------------------------------------------
+
+PREAMBLE
+The goals of the Open Font License (OFL) are to stimulate worldwide
+development of collaborative font projects, to support the font creation
+efforts of academic and linguistic communities, and to provide a free and
+open framework in which fonts may be shared and improved in partnership
+with others.
+
+The OFL allows the licensed fonts to be used, studied, modified and
+redistributed freely as long as they are not sold by themselves. The
+fonts, including any derivative works, can be bundled, embedded, 
+redistributed and/or sold with any software provided that any reserved
+names are not used by derivative works. The fonts and derivatives,
+however, cannot be released under any other type of license. The
+requirement for fonts to remain under this license does not apply
+to any document created using the fonts or their derivatives.
+
+DEFINITIONS
+"Font Software" refers to the set of files released by the Copyright
+Holder(s) under this license and clearly marked as such. This may
+include source files, build scripts and documentation.
+
+"Reserved Font Name" refers to any names specified as such after the
+copyright statement(s).
+
+"Original Version" refers to the collection of Font Software components as
+distributed by the Copyright Holder(s).
+
+"Modified Version" refers to any derivative made by adding to, deleting,
+or substituting -- in part or in whole -- any of the components of the
+Original Version, by changing formats or by porting the Font Software to a
+new environment.
+
+"Author" refers to any designer, engineer, programmer, technical
+writer or other person who contributed to the Font Software.
+
+PERMISSION & CONDITIONS
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of the Font Software, to use, study, copy, merge, embed, modify,
+redistribute, and sell modified and unmodified copies of the Font
+Software, subject to the following conditions:
+
+1) Neither the Font Software nor any of its individual components,
+in Original or Modified Versions, may be sold by itself.
+
+2) Original or Modified Versions of the Font Software may be bundled,
+redistributed and/or sold with any software, provided that each copy
+contains the above copyright notice and this license. These can be
+included either as stand-alone text files, human-readable headers or
+in the appropriate machine-readable metadata fields within text or
+binary files as long as those fields can be easily viewed by the user.
+
+3) No Modified Version of the Font Software may use the Reserved Font
+Name(s) unless explicit written permission is granted by the corresponding
+Copyright Holder. This restriction only applies to the primary font name as
+presented to the users.
+
+4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+Software shall not be used to promote, endorse or advertise any
+Modified Version, except to acknowledge the contribution(s) of the
+Copyright Holder(s) and the Author(s) or with their explicit written
+permission.
+
+5) The Font Software, modified or unmodified, in part or in whole,
+must be distributed entirely under this license, and must not be
+distributed under any other license. The requirement for fonts to
+remain under this license does not apply to any document created
+using the Font Software.
+
+TERMINATION
+This license becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
+OTHER DEALINGS IN THE FONT SOFTWARE.

assets/fonts/JetBrainsMono-OFL.txt

@@ -0,0 +1,93 @@
+Copyright 2020 The JetBrains Mono Project Authors (https://github.com/JetBrains/JetBrainsMono)
+
+This Font Software is licensed under the SIL Open Font License, Version 1.1.
+
+This license is copied below, and is also available with a FAQ at: https://scripts.sil.org/OFL
+
+
+-----------------------------------------------------------
+SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
+-----------------------------------------------------------
+
+PREAMBLE
+The goals of the Open Font License (OFL) are to stimulate worldwide
+development of collaborative font projects, to support the font creation
+efforts of academic and linguistic communities, and to provide a free and
+open framework in which fonts may be shared and improved in partnership
+with others.
+
+The OFL allows the licensed fonts to be used, studied, modified and
+redistributed freely as long as they are not sold by themselves. The
+fonts, including any derivative works, can be bundled, embedded,
+redistributed and/or sold with any software provided that any reserved
+names are not used by derivative works. The fonts and derivatives,
+however, cannot be released under any other type of license. The
+requirement for fonts to remain under this license does not apply
+to any document created using the fonts or their derivatives.
+
+DEFINITIONS
+"Font Software" refers to the set of files released by the Copyright
+Holder(s) under this license and clearly marked as such. This may
+include source files, build scripts and documentation.
+
+"Reserved Font Name" refers to any names specified as such after the
+copyright statement(s).
+
+"Original Version" refers to the collection of Font Software components as
+distributed by the Copyright Holder(s).
+
+"Modified Version" refers to any derivative made by adding to, deleting,
+or substituting -- in part or in whole -- any of the components of the
+Original Version, by changing formats or by porting the Font Software to a
+new environment.
+
+"Author" refers to any designer, engineer, programmer, technical
+writer or other person who contributed to the Font Software.
+
+PERMISSION & CONDITIONS
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of the Font Software, to use, study, copy, merge, embed, modify,
+redistribute, and sell modified and unmodified copies of the Font
+Software, subject to the following conditions:
+
+1) Neither the Font Software nor any of its individual components,
+in Original or Modified Versions, may be sold by itself.
+
+2) Original or Modified Versions of the Font Software may be bundled,
+redistributed and/or sold with any software, provided that each copy
+contains the above copyright notice and this license. These can be
+included either as stand-alone text files, human-readable headers or
+in the appropriate machine-readable metadata fields within text or
+binary files as long as those fields can be easily viewed by the user.
+
+3) No Modified Version of the Font Software may use the Reserved Font
+Name(s) unless explicit written permission is granted by the corresponding
+Copyright Holder. This restriction only applies to the primary font name as
+presented to the users.
+
+4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+Software shall not be used to promote, endorse or advertise any
+Modified Version, except to acknowledge the contribution(s) of the
+Copyright Holder(s) and the Author(s) or with their explicit written
+permission.
+
+5) The Font Software, modified or unmodified, in part or in whole,
+must be distributed entirely under this license, and must not be
+distributed under any other license. The requirement for fonts to
+remain under this license does not apply to any document created
+using the Font Software.
+
+TERMINATION
+This license becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
+OTHER DEALINGS IN THE FONT SOFTWARE.

docs/BLE_PROTOCOL.md

@@ -21,7 +21,12 @@ The MeshCore BLE protocol implements a binary frame-based communication system u
 
 ### Connection Flow
 
-1. **Scan** for devices with name prefix `MeshCore-`
+1. **Scan** for devices with known name prefixes (defined in `MeshCoreUuids.deviceNamePrefixes`):
+    - `MeshCore-`
+    - `Whisper-`
+    - `WisCore-`
+    - `HT-`
+    - `LowMesh_MC_`
 2. **Connect** with 15-second timeout
 3. **Request MTU** of 185 bytes (falls back to default if unsupported)
 4. **Discover services** and locate NUS characteristics

documentation/README.md

@@ -14,7 +14,8 @@ MeshCore Open is an open-source Flutter client for MeshCore LoRa mesh networking
 8. [Notifications](notifications.md) - System notifications, unread badges, and notification preferences
 9. [Repeater Management](repeater-management.md) - Repeater hub, status, CLI, telemetry, and neighbors
 10. [Additional Features](additional-features.md) - GIF picker, localization, debug logs, SMAZ compression, and more
-11. [BLE Protocol & Data Layer](ble-protocol.md) - Technical reference for the communication protocol and data architecture
+11. [Routing Paths](routing-paths.md) - Path encoding, validation, device capability detection, and storage
+12. [BLE Protocol & Data Layer](ble-protocol.md) - Technical reference for the communication protocol and data architecture
 
 ## App Overview
 

documentation/additional-features.md

@@ -25,8 +25,8 @@ A bottom sheet with a search field and a grid of GIF thumbnails.
 ### How to Access
 App Settings → Appearance → Language
 
-### Supported Languages (15)
-English, French, Spanish, German, Polish, Slovenian, Portuguese, Italian, Chinese, Swedish, Dutch, Slovak, Bulgarian, Russian, Ukrainian
+### Supported Languages (18)
+English, French, Spanish, German, Polish, Slovenian, Portuguese, Italian, Chinese, Swedish, Dutch, Slovak, Bulgarian, Russian, Ukrainian, Hungarian, Japanese, Korean
 
 ### How It Works
 - All UI strings go through Flutter's ARB localization system
@@ -183,5 +183,80 @@ An ML-based service that predicts expected delivery timeouts:
 - Applies a **1.5x safety margin** to raw predictions (the actual timeout issued is 1.5× the model's predicted delivery time)
 - Features with zero variance are automatically excluded from training
 - Blends per-contact statistics with ML predictions
-- Falls back to `3000 + 3000 × pathLength` ms when insufficient data
+- Falls back to `3000 + 3000 × pathLength` ms when insufficient data. Note: `pathLength` here refers to the stored hop count in the app's model/storage (number of hops), not the on-air encoded byte length.
 - Observations are persisted to storage via a 2-second debounced timer (observations within 2s of app termination may be lost)
+
+---
+
+## On-Device Message Translation
+
+### What It Is
+An optional on-device translation service powered by an embedded LLM (llamadart, running GGUF models). Translation runs entirely on-device — no data leaves the app.
+
+### How to Access
+Tap the translate button on any received message. On first use, the GGUF model file is downloaded and cached locally.
+
+### How It Works
+- Model files are managed by `TranslationFileStore`; download progress is shown in-place
+- Before translating, the source language is automatically detected using the `flutter_langdetect` package. If the detected language already matches the target language, translation is skipped
+- Translation runs via `TranslationService` using the llamadart CPU backend (arm64 and x64 on Android)
+- Translated text is shown in `TranslatedMessageContent` as an inline overlay on the original message bubble
+- Each translation is cached; re-tapping shows the cached result without re-running inference
+
+---
+
+## Emoji Reactions
+
+### How to Access
+Long-press a message bubble in any direct or channel chat, then select a reaction emoji.
+
+### What the User Sees
+An emoji picker inline with common reactions. Selected reactions appear below the message bubble with a count.
+
+### How It Works
+- Implemented via `emoji_picker.dart` and `reaction_helper.dart`
+- Reactions are transmitted as a special message type visible to all participants with MeshCore Open
+
+---
+
+## Linkification
+
+### What It Does
+URLs and `meshcore://` URIs in received messages are automatically detected and rendered as tappable links.
+
+### How It Works
+- Powered by the `flutter_linkify` package via `link_handler.dart`
+- Tapping a URL opens the system browser; tapping a `meshcore://` URI imports the contact
+
+---
+
+## GPX Export
+
+### How to Access
+Settings → Export section (three options: Export Repeaters, Export Contacts, Export All).
+
+### What It Does
+Exports contacts with GPS coordinates to a `.gpx` file via the OS share sheet. Not available on web.
+
+---
+
+## Pinch-to-Zoom Chat Text
+
+### What It Does
+Users can pinch to scale all chat text up or down within a session.
+
+### How It Works
+- Implemented via `ChatTextScaleService` and `ChatZoomWrapper`
+- Scale range: 0.8× to 1.8×
+- The chosen scale persists across the session via the service
+
+---
+
+## Background Service (Android)
+
+### What It Does
+On Android, a foreground service (`background_service.dart`) keeps the BLE connection and message handling alive when the app is in the background. On other platforms this is a no-op.
+
+### User Impact
+- A persistent notification appears while the service is running
+- Messages are received and retry logic continues even when the app is not in the foreground

documentation/ble-protocol.md

@@ -33,7 +33,6 @@ RX (device → host):  [0x3E][len_lo][len_hi][payload...]
 - Length: 2-byte little-endian, payload only
 - Max payload: 172 bytes
 - TCP: `tcpNoDelay: true` (Nagle disabled), writes serialized to prevent interleaving
-- USB: 10ms post-write delay between frames
 
 ## Connection State Machine
 
@@ -49,8 +48,16 @@ enum MeshCoreConnectionState {
 
 ## BLE Connection Lifecycle
 
-1. **Scan** with keyword filters `["MeshCore-", "Whisper-"]`
-2. **Connect** with 15-second timeout
+1. **Scan** with known name prefixes (defined in `MeshCoreUuids.deviceNamePrefixes`):
+    - `MeshCore-`
+    - `Whisper-`
+    - `WisCore-`
+    - `Seeed`
+    - `Lilygo`
+    - `HT-`
+    - `LowMesh_MC_`
+    - `NRF52`
+2. **Connect** with 15-second timeout (6 seconds on Linux)
 3. **Request MTU** 185 bytes (non-web only)
 4. **Discover services** and locate NUS
 5. **Enable TX notifications** (up to 3 attempts on native)
@@ -74,7 +81,7 @@ On unexpected disconnection, auto-reconnect with exponential backoff:
 | Max path size | 64 bytes | Maximum path data |
 | Max name size | 32 bytes | Maximum node name |
 | Max text payload | 160 bytes | Firmware `MAX_TEXT_LEN` |
-| App protocol version | 3 | Sent in device query |
+| App protocol version | 4 | Sent in device query |
 | Contact frame size | 148 bytes | Fixed-size contact record |
 
 ## Command Codes (App → Device)
@@ -109,13 +116,17 @@ On unexpected disconnection, auto-reconnect with exponential backoff:
 | 32 | CMD_SET_CHANNEL | Set channel name and PSK |
 | 36 | CMD_SEND_TRACE_PATH | Request path trace |
 | 38 | CMD_SET_OTHER_PARAMS | Set misc parameters |
-| 39 | CMD_GET_TELEMETRY_REQ | Request sensor telemetry |
+| 39 | CMD_SEND_TELEMETRY_REQ | Request sensor telemetry |
 | 40 | CMD_GET_CUSTOM_VAR | Get custom variables |
 | 41 | CMD_SET_CUSTOM_VAR | Set a custom variable |
 | 50 | CMD_SEND_BINARY_REQ | Send binary request |
+| 54 | CMD_SET_FLOOD_SCOPE | Set flood routing scope (v8+) |
+| 55 | CMD_SEND_CONTROL_DATA | Send control data (e.g. zero-hop discovery, v8+) |
+| 56 | CMD_GET_STATS | Request companion radio stats |
 | 57 | CMD_SEND_ANON_REQ | Send anonymous request |
 | 58 | CMD_SET_AUTO_ADD_CONFIG | Set auto-add configuration |
 | 59 | CMD_GET_AUTO_ADD_CONFIG | Get auto-add configuration |
+| 61 | CMD_SET_PATH_HASH_MODE | Set path hash width (bytes per hop) |
 
 ## Response / Push Codes (Device → App)
 
@@ -139,6 +150,7 @@ On unexpected disconnection, auto-reconnect with exponential backoff:
 | 17 | RESP_CODE_CHANNEL_MSG_RECV_V3 | Incoming channel message (v3) |
 | 18 | RESP_CODE_CHANNEL_INFO | Channel definition |
 | 21 | RESP_CODE_CUSTOM_VARS | Custom variables |
+| 24 | RESP_CODE_STATS | Companion radio stats |
 | 25 | RESP_CODE_AUTO_ADD_CONFIG | Auto-add flags |
 | 0x80 | PUSH_CODE_ADVERT | Known contact re-seen |
 | 0x81 | PUSH_CODE_PATH_UPDATED | Better path found; carries the 32-byte public key of the updated contact |
@@ -152,6 +164,7 @@ On unexpected disconnection, auto-reconnect with exponential backoff:
 | 0x8A | PUSH_CODE_NEW_ADVERT | New node discovered |
 | 0x8B | PUSH_CODE_TELEMETRY_RESPONSE | Sensor telemetry data |
 | 0x8C | PUSH_CODE_BINARY_RESPONSE | Binary data response |
+| 0x8E | PUSH_CODE_CONTROL_DATA | Control data push (e.g. zero-hop discovery response) |
 
 ## Data Models
 

documentation/channels.md

@@ -4,7 +4,7 @@
 
 Channels are broadcast group-chat spaces secured by a 16-byte pre-shared key (PSK). Any device with the same channel index and PSK will receive and decrypt channel messages. Unlike direct messages, channel messages are broadcast to the entire mesh.
 
-Up to 8 channels (indices 0–7) can be active simultaneously on one device.
+The number of active channels is determined by the firmware (default 40); the device reports its actual limit at login.
 
 ## How to Access
 
@@ -17,7 +17,7 @@ QuickSwitchBar tab 1 (middle) from any main screen.
 | Public | Globe | Green | Fixed well-known PSK; any device can join |
 | Hashtag | Hash tag | Blue | PSK derived from the hashtag name via SHA-256; discoverable by convention |
 | Private | Lock | Blue | Random PSK; requires out-of-band sharing of the 32-hex key |
-| Community | Groups/Tag | Purple | PSK derived via HMAC-SHA256 from a community's shared secret |
+| Community | Groups/Tag | Magenta | PSK derived via HMAC-SHA256 from a community's shared secret |
 
 ## Channels List Screen
 
@@ -26,13 +26,12 @@ QuickSwitchBar tab 1 (middle) from any main screen.
 - **Search bar** with live text filtering (300ms debounce)
 - **Sort/filter button**
 - **Scrollable list of channel cards**, each showing:
-  - Type icon with color coding (purple badge overlay for community channels)
+  - Type icon with color coding (magenta badge overlay for community channels)
   - Channel name (or "Channel N" if unnamed)
-  - Subtitle: "Public channel", "Hashtag channel", "Private channel", or "Community channel - {name}"
   - Unread badge (if messages are unread)
   - Drag handle (when manual sort is active)
 - **"+" FAB** to add a new channel
-- **Overflow menu**: Disconnect, Manage Communities (only shown when at least one community exists), Settings
+- **Overflow menu**: Disconnect, Manage Communities, Settings
 
 If no channels exist, an empty state with an "Add Public Channel" shortcut is shown. If a search produces no results, a separate "no results" empty state with a search-off icon is shown.
 
@@ -60,7 +59,7 @@ Tap the "+" FAB to open a dialog with six options:
 
 | Action | Description |
 |---|---|
-| Edit | Change name, PSK (with a dice icon to generate a random PSK), or SMAZ compression toggle (compresses outgoing messages to allow longer text within the byte limit) |
+| Edit | Change name, PSK (with a dice icon to generate a random PSK), SMAZ compression toggle (compresses outgoing messages to allow longer text within the byte limit), or Cyr2Lat encoding toggle (transliterates Cyrillic to Latin for compatibility) |
 | Mute / Unmute | Toggle push notification suppression for this channel |
 | Delete | Remove the channel from the device (confirmation required) |
 
@@ -70,9 +69,9 @@ Tap a channel card to open the channel chat screen.
 
 ### App Bar
 
-- Type icon (public/private/hashtag)
+- Type icon: globe for public channels, tag (#) for all other channel types
 - Channel name
-- Subtitle: "{type} - {N} unread"
+- Subtitle: "{Public|Private} • {N} unread" (e.g., "Public • 3 unread")
 
 ### Message Display
 
@@ -101,8 +100,7 @@ Tap a channel card to open the channel chat screen.
 
 ### Message Path Viewing
 
-- **Mobile**: Tap a message bubble to view its routing path
-- **Desktop**: Long-press/right-click → "Path" (tapping the bubble does nothing on desktop)
+- **All platforms**: Long-press (or right-click on desktop) a message bubble → "Path"
 - Opens the Channel Message Path Screen (see [Additional Features](additional-features.md))
 
 ### Context Actions (Long-Press / Right-Click)
@@ -110,20 +108,12 @@ Tap a channel card to open the channel chat screen.
 | Action | Availability | Description |
 |---|---|---|
 | Reply | All messages | Triggers reply mode |
-| Path | Desktop only | Opens message path view |
+| Path | All messages | Opens message path view |
 | Add Reaction | Incoming messages only | Opens emoji picker (cannot react to your own messages) |
 | Copy | All messages | Copies text to clipboard |
+| Mark as Unread | Incoming messages only | Marks this message and all subsequent incoming messages as unread |
 | Delete | All messages | Removes locally (not from mesh) |
 
-### Message Path Viewing
-
-Tap a message bubble to open the Channel Message Path Screen, which shows:
-- Each hop in the path as a visual chain
-- Known contacts identified by name at each hop
-- Observed vs. declared hop counts
-- Alternative path variants (if received via multiple paths)
-- Map view buttons for geographic path visualization
-
 ## Communities
 
 Communities are a layer above channels that provide a private namespace.
@@ -151,7 +141,7 @@ From the channels screen overflow menu → "Manage Communities". Opens a draggab
 - **Tap a community** to directly show its QR code for sharing
 - **Popup menu** per community:
   - **Show QR** — displays the QR code for sharing with new members
-  - **Delete** — removes the community locally and deletes all associated device channels (confirmation dialog warns how many channels will be removed)
+  - **Leave Community** — removes the community locally and deletes all associated device channels (confirmation dialog warns how many channels will be removed)
 
 ## How Channels Differ from Direct Messages
 

documentation/chat-and-messaging.md

@@ -18,17 +18,15 @@ From the Contacts screen, tap any Chat-type contact to open the ChatScreen.
 
 - **Title**: Contact name
 - **Subtitle**: Current routing path label (e.g., "2 hops", "flood (auto)", "direct (forced)") and unread count. Tapping the subtitle shows the full path details.
-- **Action buttons**:
-  - **Routing mode** (waves icon): Switch between Auto, Direct, and Flood routing
-  - **Path management** (timeline icon): View recent paths with hop count, round-trip time, age, and success count. Paths are color-coded by direct repeater (green/yellow/red/blue for ranked repeaters, grey for unknown). Tap a path to activate it (the device verifies and confirms via snackbar), long-press to view full path details, set custom paths, or force flood mode. A warning banner appears when history reaches 100 entries.
-  - **Info** (info icon): Contact info dialog showing type, path, GPS coordinates, public key, and SMAZ compression toggle
+- **Action button**:
+  - **Overflow menu** (⋮ icon): Contains Routing, Info, Telemetry, Settings, and Clear Chat. Routing opens the routing sheet where you can switch between Auto, Direct, and Flood routing and manage recent paths (hop count, round-trip time, age, success count, color-coded by repeater). Info shows a dialog with contact type, path, GPS coordinates, and public key.
 
 ### Message List
 
 - Scrollable list with newest messages at the bottom
 - **Outgoing messages**: Right-aligned, primary color background. **Failed messages** change to a red-toned error container background
 - **Incoming messages**: Left-aligned, grey background with a colored avatar (initial letter or first emoji of sender name; color is deterministic from a hash of the sender name)
-- Bubble width capped at 65% of screen width
+- Bubble width capped at 72% of screen width
 - Hyperlinks rendered as tappable green underlined text
 - **Pinch-to-zoom**: Two-finger zoom (0.8x–1.8x) and double-tap to reset
 - **Jump to bottom**: Floating button appears when scrolled away from the bottom
@@ -37,6 +35,7 @@ From the Contacts screen, tap any Chat-type contact to open the ChatScreen.
 ### Input Bar
 
 - **GIF button** (left): Opens GIF picker bottom sheet
+- **Translation button** (optional, between GIF and text field): Shown only when translation is enabled in App Settings. Tap to configure outgoing-message translation language and on/off toggle.
 - **Text field** (center): Auto-capitalization, enforces UTF-8 byte limit in real-time
 - **Send button** (right): Submits the message
 - On desktop: Enter/Numpad Enter also submits
@@ -66,8 +65,8 @@ Outgoing messages display a status indicator:
 
 When enabled in App Settings, additional metadata appears inside each bubble:
 - Timestamp (HH:MM)
-- Retry count (e.g., "Retry 2 of 4")
-- Status icon
+- Retry count (e.g., "Retry 2 of 4") — only shown for outgoing messages where at least one retry has occurred
+- Status icon (outgoing only)
 - Round-trip time in seconds (if delivered)
 
 ## Message Length Limits
@@ -86,7 +85,7 @@ When a direct message is sent:
 
 1. The app computes an expected ACK hash: `SHA256([timestamp][attempt][text][selfPubKey])[0:4]` — matching the firmware's hash calculation. If SMAZ compression is enabled, the compressed text (not the original) is hashed
 2. On device acknowledgment (`RESP_CODE_SENT`), the message transitions to "sent" and a timeout timer starts
-3. **Timeout duration**: Preferably from the ML timeout prediction service; otherwise `3000 + 3000 × path_length` milliseconds (15000ms for flood)
+3. **Timeout duration**: Preferably from the ML timeout prediction service; otherwise from the device's own `est_timeout` in `RESP_CODE_SENT` (clamped to the physics range); otherwise calculated from LoRa airtime physics: `500 + (airtime × 6 + 250) × (pathLength + 1)` ms for direct paths, `500 + 16 × airtime` ms for flood (airtime is estimated from the radio's current spreading factor, bandwidth, and coding rate). The result is capped at 45 seconds.
 4. On timeout, the message is retried with **exponential backoff**: `1000 × 2^retryCount` ms (1s, 2s, 4s, 8s, 16s...)
 5. **Max retries**: Configurable (default 5, range 2–10)
 6. After max retries, the message is marked "failed" — but a **30-second grace window** remains during which a late ACK can still resolve the message to "delivered"
@@ -113,8 +112,10 @@ Add emoji reactions to incoming messages (not your own):
 | Action | Availability | Description |
 |---|---|---|
 | Add reaction | Incoming messages only | Opens emoji picker |
-| View path | Mobile: tap bubble directly; Desktop: long-press/right-click menu | Shows message routing path |
+| View path | All platforms: long-press/right-click menu | Shows message routing path |
 | Copy | All messages | Copies text to clipboard |
+| Translate | Incoming messages only (when translation is enabled and not yet translated) | Translates the message on-demand using the on-device model |
+| Mark as Unread | Incoming messages only | Marks this message and all subsequent incoming messages as unread |
 | Delete | All messages | Removes locally (not from mesh) |
 | Retry | Failed outgoing messages | Re-sends the message |
 | Open chat with sender | Room server chats | Opens 1:1 chat with the message sender |

documentation/contacts.md

@@ -6,18 +6,17 @@ The Contacts screen is the primary hub for managing mesh nodes your radio has a
 
 ## How to Access
 
-- Automatically shown after connecting to a device
-- QuickSwitchBar tab 0 (leftmost) from Channels or Map screens
+- QuickSwitchBar tab 0 (leftmost) from Channels or Map screens (Channels is shown first after connecting)
 - Back navigation from Chat or Settings screens
 
 ## Contact Types
 
 | Type | Avatar Color | Icon | Description |
 |---|---|---|---|
-| Chat | Blue | Chat bubble | Another user's mesh radio |
-| Repeater | Orange | Cell tower | A mesh repeater/relay node |
-| Room | Purple | Group | A room server for group chat |
-| Sensor | Green | Sensors | A sensor device |
+| Chat | Blue | Initials / emoji | Another user's mesh radio |
+| Repeater | Amber | Cell tower | A mesh repeater/relay node |
+| Room | Magenta | Meeting room | A room server for group chat |
+| Sensor | Teal | Sensors | A sensor device |
 
 ## Contact List
 
@@ -73,41 +72,42 @@ Groups are stored per radio identity (scoped by public key).
 
 | Action | Availability | Description |
 |---|---|---|
-| Path Trace / Ping | Repeaters, Rooms (always); Chat if `pathLength > 0` | Opens PathTraceMapScreen. Label shows "Ping" when no path bytes are known, "Path Trace" otherwise |
+| Ping | Repeaters only | Opens PathTraceMapScreen targeting the repeater |
+| Path Trace | Rooms (always); Chat/Sensor only if `pathLength > 0` | Opens PathTraceMapScreen. For rooms, label shows "Ping" when no path bytes are known, "Path Trace" when path bytes are available |
 | Manage Repeater | Repeaters only | Login dialog → RepeaterHubScreen |
 | Room Login | Rooms only | Login dialog → ChatScreen |
 | Room Management | Rooms only | Login dialog → RepeaterHubScreen (management mode) |
-| Open Chat | Chat/Sensor | Same as single tap |
 | Add/Remove Favorite | All types | Toggles the favorite flag |
-| Share Contact | All types | Copies `meshcore://<hex>` URI to clipboard |
+| Share Contact | All types | Requests advert from device → copies `meshcore://<hex>` URI to clipboard |
 | Share Contact Zero-Hop | All types | Broadcasts the contact's advertisement one hop |
 | Delete Contact | All types | Confirmation dialog → removes from device and clears messages |
 
 ## App Bar Menus
 
-The Contacts screen has **two separate popup menus** in the app bar:
+The Contacts screen has a single **three-dot overflow menu** (`⋮`) in the app bar:
 
-**Antenna icon menu** (contact sharing):
+- Discovered Contacts — opens the DiscoveryScreen
+- Add Contact from Clipboard — reads a `meshcore://<hex>` URI from clipboard and imports it
+- *(divider)*
 - Zero-Hop Advert — broadcasts your advertisement to immediately adjacent nodes
 - Flood Advert — broadcasts across the full mesh network
 - Copy Advert to Clipboard — copies your `meshcore://<hex>` URI for sharing externally
-- Add Contact from Clipboard — reads a `meshcore://<hex>` URI from clipboard and imports it
-
-**Three-dot overflow menu**:
+- *(divider)*
 - Disconnect — disconnects from the device
-- Discovered Contacts — opens the DiscoveryScreen
 - Settings — opens the Settings screen
 
+A **floating action button** (person-add icon) provides a shortcut sheet to "Add Contact from Clipboard" or "Discovered Contacts".
+
 ## Adding Contacts
 
 ### Automatic (Passive)
 When the radio hears an advertisement, the contact appears automatically if auto-add is enabled for that type (configurable in Settings → Contact Settings).
 
 ### Import from Clipboard
-Antenna menu → "Add Contact from Clipboard". Reads a `meshcore://<hex>` URI from clipboard and imports it to the device.
+Overflow menu (or the FAB shortcut) → "Add Contact from Clipboard". Reads a `meshcore://<hex>` URI from clipboard and imports it to the device.
 
 ### Import from Discovered Contacts
-Overflow menu → "Discovered Contacts". Shows nodes heard passively that haven't been added yet. Tap to immediately import (no confirmation dialog), or long-press for more options (Add, Copy URI, Delete). The Discovery screen has its own search bar, type filters (Users, Repeaters, Rooms, Favorites), and sort options (Last Seen, A-Z). An overflow "Delete All" option clears all discovered contacts.
+Overflow menu → "Discovered Contacts". Shows nodes heard passively that haven't been added yet. Tap to immediately import (no confirmation dialog), or long-press for more options (Copy URI, Delete). The Discovery screen has its own search bar, type filters (Users, Repeaters, Rooms), and sort options (Last Seen, A-Z). An overflow "Delete All" option clears all discovered contacts.
 
 ## Contact Sharing Format
 

documentation/map-and-location.md

@@ -25,7 +25,7 @@ All contacts with known GPS coordinates are plotted:
 | Room | Purple | Meeting room |
 | Sensor | Orange | Sensors |
 
-Node name labels appear automatically at zoom level 12 and above.
+Node name labels appear automatically at zoom level 14 and above.
 
 ### Shared Map Pins (Flag Icons)
 Location pins shared in chat messages are displayed as flags:
@@ -35,9 +35,9 @@ Location pins shared in chat messages are displayed as flags:
 
 Tap a pin to see its info. Options to "Hide" (session only) or "Remove" (persistent).
 
-### Predicted / Guessed Locations (Semi-Transparent)
+### Predicted / Guessed Locations
 
-Many contacts on the mesh don't have GPS hardware, so the map has no explicit coordinates for them. Instead of leaving these contacts invisible, the app **infers an approximate position** by analyzing the repeater path the contact's messages travel through. These inferred positions are displayed as semi-transparent markers with a `not_listed_location` icon, visually distinct from confirmed-location markers.
+Many contacts on the mesh don't have GPS hardware, so the map has no explicit coordinates for them. Instead of leaving these contacts invisible, the app **infers an approximate position** by analyzing the repeater path the contact's messages travel through. These inferred positions are displayed as markers with a `not_listed_location` icon and a muted grey or colored border, visually distinct from confirmed-location markers.
 
 #### Why guessed locations exist
 
@@ -55,19 +55,19 @@ In a mesh network, every message hops through one or more repeaters on its way t
 
 5. **Compute the estimated position**:
    - **Single anchor**: The contact is placed on a small circle (330m radius) around the repeater. The angle on the circle is deterministic — derived from an FNV-1a hash of the contact's public key — so the same contact always appears at the same offset, preventing markers from stacking on top of each other.
-   - **Two or more anchors**: The position is the average (centroid) of all anchor coordinates, with a smaller offset radius (80–120m) applied for visual separation.
+   - **Two or more anchors**: The position is a weighted average of all anchor coordinates (each subsequent anchor weighted at half the previous one, biasing toward the first), with a smaller offset radius (120m for 2 anchors, 80m for 3+) applied for visual separation.
 
 6. **Assign confidence level**:
-   - **High confidence** (2+ anchors): Displayed at 55% opacity.
-   - **Low confidence** (1 anchor): Displayed at 30% opacity.
+   - **High confidence** (2+ anchors): The marker border uses the node's type color (brighter border).
+   - **Low confidence** (1 anchor): The marker border is rendered in a muted grey.
 
 7. **Cache the result**: The computation is cached using a key derived from the contact's paths, anchor positions, path-history version, and radio parameters. The cache is only invalidated when any of these inputs change, avoiding recomputation on every UI rebuild.
 
 #### How to read guessed locations on the map
 
-- **Semi-transparent marker** with a `not_listed_location` icon: This is a guessed position, not a confirmed GPS fix.
-- **More opaque** (55%): Higher confidence — the contact was seen through 2 or more repeaters with known positions.
-- **More transparent** (30%): Lower confidence — based on a single repeater anchor only.
+- **Marker with `not_listed_location` icon**: This is a guessed position, not a confirmed GPS fix.
+- **Colored border** (type color): Higher confidence — the contact was seen through 2 or more repeaters with known positions.
+- **Grey border**: Lower confidence — based on a single repeater anchor only.
 - Coordinates shown in the marker info dialog are prefixed with `~` to indicate they are estimated.
 - Guessed locations can be toggled on/off in the map filter dialog (FAB → "Guessed locations" toggle).
 
@@ -88,10 +88,10 @@ Shows a bottom sheet with:
 - **Set as my location**: Updates your device's advertised location
 
 ### Filter Dialog (FAB)
-Toggle visibility of: chat nodes, repeaters, other nodes, guessed locations, discovery contacts.
+Toggle visibility of: chat nodes, repeaters, other nodes, guessed locations, discovery contacts, overlapping markers (stacked markers at similar coordinates), and shared map pins (flag markers).
 Additional filters:
 - **Key prefix filter**: Show only contacts whose public key starts with a given prefix
-- **Last-seen time slider**: From 1 hour to "all time"
+- **Last-seen time slider**: Exponential scale from near-zero to 6 months, with "all time" at the top end
 
 ### Legend Card (Top-Right)
 Shows node count and pin count. Tappable to expand a legend of all marker types.
@@ -110,9 +110,16 @@ A map with a polyline showing the route from your node through repeater hops to
 - **Green circles**: Hops with known GPS coordinates
 - **Orange circles** (`~HH`): Inferred positions (no GPS but deducible from contacts)
 - **Red endpoint**: Target contact with known GPS
-- **Purple semi-transparent endpoint**: Target with guessed position
+- **Magenta endpoint**: Target with guessed position
 
-A legend card at the bottom lists each hop pair with SNR quality icons and total path distance.
+A bottom panel shows each hop pair with SNR quality icons and total path distance. When multiple observed paths are available, a **Single / Combined** toggle appears at the top of the map. In Combined view, all paths are overlaid; shared segments are highlighted with a white halo and a path count badge appears on shared nodes.
+
+The bottom panel also provides **packet animation controls**:
+- **Animation toggle** (on/off)
+- **Step back / Play / Step forward / Replay** buttons
+- **Follow packet lock** — keeps the map camera centered on the moving packet dot
+- **Speed selector** (0.5×, 1×, 2×, 4×)
+- A live **"Hop x of y · from → to"** label that tracks the active segment
 
 ### How It Works
 Sends a trace request frame over the mesh. The repeater network traces the path hop-by-hop and returns per-hop SNR data. For hops without GPS, positions are inferred by averaging GPS coordinates of contacts sharing that last-hop byte.
@@ -125,17 +132,17 @@ Sends a trace request frame over the mesh. The repeater network traces the path
 From the main map, tap the terrain/antenna icon.
 
 ### What the User Sees
-A full-screen map with a collapsible control panel containing:
-- **Elevation profile chart**: Terrain fill (green), LOS beam line (white), radio horizon line (yellow)
-- **Status**: Clear (green) or blocked (red) with distance and minimum clearance
-- **Options panel**: Node toggles, endpoint dropdowns, antenna height sliders (0–400 ft), Run LOS button
+A full-screen map with a draggable bottom sheet containing:
+- **Elevation profile chart**: Terrain fill (green), LOS beam line (white), radio horizon line (yellow); obstruction points are marked as clickable dots on the chart
+- **Status summary**: Clear (green), Marginal (amber, within 5 m of obstruction), or Blocked (red) with distance and clearance/obstruction amount
+- **Options section** (collapsible): Node toggles, endpoint dropdowns, antenna height sliders (0–400 ft), Run LOS button
 
 ### Key Interactions
-- **Long-press the map** to add custom endpoints (orange pushpin markers, renameable/deleteable)
+- **Long-press the map** to add custom endpoints (pushpin markers, renameable/deleteable)
 - **Tap a marker** to select it as Point A or B; LOS runs automatically when both are set
 - **Antenna heights** are adjustable for both endpoints
-- **Map line** between endpoints is colored green (clear) or red (blocked)
-- Terrain elevation is fetched from the Open-Meteo API (21–81 sample points, cached 24 hours)
+- **Map line** between endpoints is colored green (clear), amber (marginal), or red (blocked)
+- Terrain elevation is fetched from the Open-Meteo API (21, 41, or 81 sample points depending on link distance, cached 24 hours)
 - K-factor is adjusted per radio frequency from a baseline of 4/3 at 915 MHz
 
 ---
@@ -149,7 +156,7 @@ Settings → App Settings → Map Display → Offline Map Cache
 - Map with a blue polygon overlay showing previously selected cache bounds
 - Bounding box coordinates card
 - **Cache Area** controls: "Use Current View" and Clear buttons
-- **Zoom Range** slider (3–18) with estimated tile count
+- **Zoom Range** range slider (3–18, dual-handle for min and max) with estimated tile count
 - **Download progress** bar (when downloading)
 - **Download Tiles** and **Clear Cache** buttons
 

documentation/navigation.md

@@ -5,7 +5,7 @@
 The app follows this general flow:
 
 ```
-Launch → Scanner Screen → [Connect via BLE/USB/TCP] → Contacts Screen
+Launch → Scanner Screen → [Connect via BLE/USB/TCP] → Channels Screen
 ```
 
 After connecting, the three main screens (Contacts, Channels, Map) are accessible via a persistent bottom navigation bar called the **QuickSwitchBar**.
@@ -22,42 +22,27 @@ The QuickSwitchBar is a Material 3 `NavigationBar` with a frosted-glass visual t
 
 Tapping a tab replaces the current screen with a subtle fade + slight horizontal nudge transition (220ms forward, 200ms reverse). The back button is suppressed on all three main screens — navigation between them is flat, not stacked. All icons use outline variants (`people_outline`, `tag`, `map_outlined`) following Material 3 conventions.
 
-## Device Screen
+## Disconnection
 
-The Device Screen is a transitional hub that shows after connection. In practice, the app navigates directly to Contacts after connecting, but the Device Screen is reachable via the QuickSwitchBar.
-
-### What the User Sees
-
-**App Bar**:
-- Left: Battery indicator chip (tappable — toggles between percentage and voltage display). Icon changes based on level: `battery_unknown` when data unavailable, `battery_alert` (orange) at 15% or below, `battery_full` otherwise
-- Left-aligned title (`centerTitle: false`): Two-line layout — small grey "MeshCore" label above the device name in bold
-- Right: Disconnect button (`bluetooth_disabled` crossed-out icon) and Settings button (tune icon)
-
-**Body**:
-- **Connection Card**: Device avatar, device name, device ID, "Connected" chip, and battery chip
-- **Quick Switch** section: The QuickSwitchBar widget for navigating to Contacts/Channels/Map
-
-### Disconnection
-
-- The disconnect button shows a confirmation dialog before disconnecting
+- The disconnect button (available in the overflow menu of each main screen) shows a confirmation dialog before disconnecting
 - If the device disconnects unexpectedly, the app automatically navigates back to the Scanner screen (fires after the current frame completes via a post-frame callback)
 - This auto-navigation behavior (`DisconnectNavigationMixin`) is shared across all main screens
 
 ## Theme and Locale
 
 - **Theme mode** is user-configurable in App Settings (System / Light / Dark) — not locked to system
-- **Language** can be overridden to one of 15 supported languages, or follow the system locale
+- **Language** can be overridden to one of 18 supported languages, or follow the system locale
 - On web, if a non-Chromium browser is detected, the app shows a `ChromeRequiredScreen` instead of the Scanner (Web Bluetooth requires Chromium)
 
 ## Full Navigation Graph
 
 ```
 ScannerScreen (root, always on stack)
-  ├─ [BLE connect] → push → ContactsScreen
-  ├─ [TCP FAB] → push → TcpScreen
-  │     └─ [TCP connected] → pushReplacement → ContactsScreen
-  └─ [USB FAB] → push → UsbScreen
-        └─ [USB connected] → pushReplacement → ContactsScreen
+  ├─ [BLE connect] → push → ChannelsScreen
+  ├─ [TCP icon button] → push → TcpScreen
+  │     └─ [TCP connected] → pushReplacement → ChannelsScreen
+  └─ [USB icon button] → push → UsbScreen
+        └─ [USB connected] → pushReplacement → ChannelsScreen
 
 ContactsScreen (selected=0)
   ├─ [quick-switch 1] → pushReplacement → ChannelsScreen
@@ -75,9 +60,9 @@ ChannelsScreen (selected=1)
 MapScreen (selected=2)
   ├─ [quick-switch 0] → pushReplacement → ContactsScreen
   ├─ [quick-switch 1] → pushReplacement → ChannelsScreen
-  ├─ [radar button] → push → PathTraceMapScreen
-  ├─ [terrain button] → push → LineOfSightMapScreen
-  └─ [long-press] → share marker / set location
+  ├─ [radar menu item] → enters in-map path trace mode (push → PathTraceMapScreen after path is built)
+  ├─ [terrain menu item] → push → LineOfSightMapScreen
+  └─ [long-press] → share marker sheet
 
 Settings (push from any main screen)
   └─ [App Settings] → push → AppSettingsScreen

documentation/notifications.md

@@ -22,7 +22,7 @@ MeshCore Open provides both **system notifications** (push-style OS alerts) and
 
 ### 3. Advertisement Notifications
 - **Triggered when**: A new node is discovered on the mesh for the first time
-- **Title**: "New [type] discovered" (e.g., "New chat node discovered")
+- **Title**: "New [type] discovered" (e.g., "New Chat discovered")
 - **Body**: Contact's name
 - **Priority**: Default
 - **Android channel**: `adverts`
@@ -43,7 +43,7 @@ Red numeric badges appear throughout the UI:
 - **Contacts list**: Each contact row shows a red pill badge (e.g., "3") for unread messages
 - **Channels list**: Each channel row shows an unread badge
 - **Chat screen subtitle**: Shows unread count inline
-- Badges cap at "99+" for display
+- Badges cap at "9999+" for display
 
 ### How Unread Counts Work
 
@@ -73,7 +73,7 @@ There is no per-contact muting.
 
 The notification system prevents notification storms:
 - **Minimum interval**: 3 seconds between individual notifications
-- **Batch window**: If multiple notifications arrive within 5 seconds, they are combined into a single summary notification on a fourth Android channel (`batch_summary`): "MeshCore Activity — 2 messages, 1 channel message, 3 new nodes". Note: batch summaries are Android-only; on Apple platforms individual notifications are shown
+- **Batch window**: If multiple notifications arrive within 5 seconds, they are combined into a single summary notification on a fourth Android channel (`batch_summary`). The title is "MeshCore Activity" and the body lists the grouped counts (e.g., "2 messages, 1 channel message, 3 new nodes"). Batch summaries are Android-only; queued notifications that overflow the batch window are silently dropped on other platforms
 
 ## Notification Clearing
 

documentation/repeater-management.md

@@ -17,8 +17,8 @@ From the Contacts screen:
 - Password field with show/hide toggle
 - "Save password" checkbox (persists for future logins). If a saved password exists, it is pre-filled and the checkbox is pre-checked, making login one-tap
 - Routing mode selector and "Manage Paths" link are available directly in the dialog (configure routing before login)
-- Auto-retries up to 5 times on timeout, showing progress ("Attempt 2 of 5"). A wrong password stops immediately after the first attempt — only timeouts trigger retries
-- After 5 failed attempts, further login attempts are blocked
+- Auto-retries up to 5 times on timeout, showing progress ("Attempt 2 of 5"). A wrong password (explicit failure response) stops immediately — only timeouts trigger retries
+- If auto-clock-sync is enabled for this repeater (configured in Repeater Settings), a `clock sync` command is sent automatically on successful login
 
 ---
 
@@ -28,15 +28,17 @@ The central management screen showing:
 
 - **Header card**: Repeater name, short public key, path label, GPS coordinates (if known)
 - **Battery chemistry selector**: NMC / LiFePO4 / LiPo (saved per repeater)
-- **Management tool cards** (full-width cards with chevron arrows, not a grid). Title dynamically shows "Repeater Management" or "Room Management" based on contact type:
+- **Management tool cards** (full-width cards with chevron arrows, not a grid). Title dynamically shows "Repeater Management" or "Room Management" (admin) or "Repeater Guest" / "Room Guest" (guest) based on contact type and login result:
 
-| Card | Destination |
-|---|---|
-| Status | Repeater Status Screen |
-| Telemetry | Telemetry Screen |
-| CLI | Repeater CLI Screen |
-| Neighbors | Neighbors Screen |
-| Settings | Repeater Settings Screen |
+| Card | Destination | Visibility |
+|---|---|---|
+| Status | Repeater Status Screen | All users |
+| Telemetry | Telemetry Screen | All users |
+| Neighbors | Neighbors Screen | All users |
+| CLI | Repeater CLI Screen | Admin only |
+| Settings | Repeater Settings Screen | Admin only |
+
+The battery chemistry selector and CLI/Settings cards are hidden from guest users.
 
 ---
 
@@ -47,26 +49,28 @@ The central management screen showing:
 Three information cards:
 
 **System Information**:
-- Battery percentage
-- Uptime
-- Queue length
-- Error flags
+- Battery percentage and voltage (e.g. "85% / 3.95V"), using the battery chemistry set in the hub screen
 - Clock at login time
+- Uptime (days/hours/minutes/seconds)
+- Queue length
+- Debug flags (error event count)
 
 **Radio Statistics**:
 - Last RSSI and SNR
 - Noise floor
-- TX and RX airtime
+- TX airtime and RX airtime
 
 **Packet Statistics**:
-- Packets sent, received, and duplicates
-- Broken down by flood vs. direct
+- Packets sent and received, each broken down by flood vs. direct
+- Duplicates, broken down by flood vs. direct
+- Channel utilization (% of uptime used by TX + RX)
 
 ### Key Interactions
 - Auto-queries the repeater on open; shows a loading spinner until data arrives
-- On timeout: red snackbar error. On success: data appears with a green snackbar confirmation
-- Pull-to-refresh or refresh button to re-query
+- On timeout: red snackbar error. On success: data appears in-place (no extra snackbar)
+- Pull-to-refresh or refresh button in the app bar to re-query
 - Routing mode popup and path management dialog in app bar (these controls appear on **all** management sub-screens, not just Status)
+- Accepts both binary `RESP_CODE_STATUS_RESPONSE` frames and legacy JSON text responses
 
 ---
 
@@ -76,7 +80,7 @@ A terminal-style interface for sending commands directly to the repeater.
 
 ### What the User Sees
 
-- **Quick-command bar** (horizontal scroll): Shortcut buttons for common commands (get name, get radio, get tx, neighbors, ver, advert, clock)
+- **Quick-command bar** (horizontal scroll): Shortcut buttons for 9 common commands (advert, get name, get radio, get tx, discover.neighbors, neighbors, ver, clock, clock sync)
 - **Command history list**: Sent commands in primary color, responses in secondary color
 - **Input bar**: Up/down history arrows, monospace text field with `> ` prefix, send button
 
@@ -85,16 +89,20 @@ A terminal-style interface for sending commands directly to the repeater.
 - Type a command and press send (or Enter on desktop)
 - Up/down arrows navigate through command history
 - Quick-command buttons populate and send common commands
-- Bug report icon: Shows raw frame debug info for the next typed command (shows error snackbar if input field is empty)
+- Overflow menu (three-dot icon): "Debug next command" option shows raw frame debug info for the next typed command (shows error snackbar if input field is empty)
 - Help icon: Opens a scrollable reference of all known CLI commands. Tapping any command populates the input field immediately
 - Clear icon: Wipes the command/response history
 - Failed/timed-out commands are automatically retried once
 
 ### Available CLI Commands
 
-**General**: `advert`, `reboot`, `clock`, `password`, `ver`, `clear stats`
+The in-app help reference (help icon) documents all known commands. Categories:
 
-**Settings**: `set name`, `set af`, `set tx`, `set repeat`, `set allow.read.only`, `set flood.max`, `set int.thresh`, `set agc.reset.interval`, `set multi.acks`, `set advert.interval`, `set flood.advert.interval`, `set guest.password`, `set lat`, `set lon`, `set radio`, `set rxdelay`, `set txdelay`, `set direct.txdelay`, `set bridge.*`, `set adc.multiplier`, `tempradio`, `setperm`
+**General**: `advert`, `advert.zerohop`, `reboot`, `clock`, `clock sync`, `password`, `ver`, `clear stats`, `erase`, `poweroff`, `shutdown`, `clkreboot`, `start ota`, `time`, `board`, `discover.neighbors`, `powersaving`, `stats-packets`, `stats-radio`, `stats-core`
+
+**Get**: `get name`, `get role`, `get public.key`, `get prv.key`, `get repeat`, `get tx`, `get freq`, `get radio`, `get radio.rxgain`, `get af`, `get dutycycle`, `get int.thresh`, `get agc.reset.interval`, `get multi.acks`, `get allow.read.only`, `get advert.interval`, `get flood.advert.interval`, `get guest.password`, `get lat`, `get lon`, `get rxdelay`, `get txdelay`, `get direct.txdelay`, `get flood.max`, `get owner.info`, `get path.hash.mode`, `get loop.detect`, `get acl`, `get bridge.*`, `get adc.multiplier`, `get bootloader.ver`
+
+**Set**: `set name`, `set af`, `set tx`, `set repeat`, `set allow.read.only`, `set flood.max`, `set int.thresh`, `set agc.reset.interval`, `set multi.acks`, `set advert.interval`, `set flood.advert.interval`, `set guest.password`, `set lat`, `set lon`, `set freq`, `set radio`, `set rxdelay`, `set txdelay`, `set direct.txdelay`, `set radio.rxgain`, `set dutycycle`, `set loop.detect`, `set path.hash.mode`, `set owner.info`, `set prv.key`, `set bridge.*`, `set adc.multiplier`, `tempradio`, `setperm`
 
 **Bridge**: `get bridge.type`
 
@@ -102,9 +110,13 @@ A terminal-style interface for sending commands directly to the repeater.
 
 **Neighbors**: `neighbors`, `neighbor.remove`
 
-**Region Management**: `region`, `region load/get/put/remove/allowf/denyf/home/save`
+**Power Management**: `get pwrmgt.support`, `get pwrmgt.source`, `get pwrmgt.bootreason`, `get pwrmgt.bootmv`
 
-**GPS**: `gps`, `gps on/off/sync/setloc/advert`
+**Sensors**: `sensor get {key}`, `sensor set {key} {value}`, `sensor list [start]`
+
+**GPS Management**: `gps`, `gps {on|off}`, `gps sync`, `gps setloc`, `gps advert`, `gps advert {none|share|prefs}`
+
+**Region Management**: `region`, `region load`, `region get`, `region put`, `region remove`, `region allowf`, `region denyf`, `region home`, `region save`, `region default`, `region list allowed`, `region list denied`
 
 ---
 
@@ -147,40 +159,63 @@ A card titled "Repeater's Neighbors - N" listing each neighbor as:
 
 ### What the User Sees
 
-Five configuration cards:
+Nine configuration cards, each with its own per-field refresh button(s):
 
 **1. Basic Settings**
 - Name field
-- Admin password field
-- Guest password field
+- Admin password field (write-only; always sent when non-empty)
+- Guest password field (write-only; always sent when non-empty)
 
 **2. Radio Settings**
 - Frequency (MHz)
-- TX Power (dBm)
+- TX Power (dBm) — has its own independent refresh button
 - Bandwidth dropdown (kHz)
 - Spreading Factor (SF5–SF12)
 - Coding Rate (4/5–4/8)
+- RX Gain boost toggle
 
 **3. Location Settings**
-- Latitude and longitude fields
+- Latitude and longitude fields, each with an independent refresh button
 
 **4. Features**
-- Packet forwarding toggle
-- Guest access toggle
+- Packet forwarding toggle (`set repeat`)
+- Guest access toggle (`set allow.read.only`)
+- Multi-ACKs toggle (`set multi.acks`)
+- Auto clock sync after login toggle (local app setting only, not sent to repeater)
 
-**5. Advertisement Settings**
+**5. Network Health**
+- Loop detection dropdown (off / minimal / moderate / strict; `set loop.detect`)
+- Duty cycle slider (1–100%; `set dutycycle`)
+
+**6. Advertisement Settings**
 - Local advert interval slider (60–240 minutes) with enable/disable toggle
 - Flood advert interval slider (3–168 hours) with enable/disable toggle
+- Flood max hops slider (0–64; `set flood.max`)
 
-**6. Danger Zone** (red-styled card)
-- Reboot repeater
-- Erase filesystem (serial-only warning)
+**7. Owner Info**
+- Multi-line text field for operator contact info (`set owner.info`); newlines sent as `|`
+
+**8. Actions** (one-tap, no save needed)
+- Send Advertisement (`advert`)
+- Send Zero-Hop Advertisement (`advert.zerohop`)
+- Clock Sync (`clock sync`)
+
+**9. Advanced** (collapsed by default)
+- Path hash mode dropdown (0–2; `set path.hash.mode`)
+- TX delay field (`set txdelay`)
+- Direct TX delay field (`set direct.txdelay`)
+- Interference threshold field (`set int.thresh`)
+- AGC reset interval slider (0–240s in multiples of 4; `set agc.reset.interval`)
+
+**Danger Zone** (red-styled card)
+- Reboot repeater (sends `reboot` with confirmation dialog)
+- Erase filesystem (serial-only; shows a confirmation dialog, then an informational snackbar — no command is sent over the air)
 
 ### Key Interactions
-- **Settings are NOT auto-fetched on open**. Only name and location are pre-filled from locally cached contact data. You must tap each section's refresh button to fetch live values from the repeater
-- TX Power has its own separate refresh button, independent from the main Radio Settings refresh
-- Save button appears when changes are detected
-- Settings are sent sequentially with 200ms delays between commands (fire-and-forget, no per-command acknowledgment wait)
-- Validation prevents invalid values (e.g., frequency range, LoRa parameter compatibility)
+- **Settings are NOT auto-fetched on open**. Name is pre-filled from cached contact data. Each section has its own refresh button to fetch live values from the repeater
+- TX Power, RX Gain, latitude, longitude, and advanced fields each have independent inline refresh buttons
+- Save button in app bar appears when any change is detected; failed commands keep those fields dirty for retry
+- Settings are sent sequentially with 200ms delays between commands; firmware responses are checked and partial failures are reported in a snackbar
+- Some changes (e.g. radio frequency) require a reboot; the firmware response triggers an orange "reboot needed" snackbar
 - Advertisement interval sliders reset to defaults when re-enabled (local: 60 min, flood: 3 hours)
-- **Erase Filesystem** does NOT send any command over the air — tapping it only shows a snackbar explaining the operation requires physical serial access. It is effectively non-functional when connected wirelessly
+- **Erase Filesystem** does NOT send any command over the air — tapping it only shows a snackbar explaining the operation requires physical serial access

documentation/routing-paths.md

@@ -0,0 +1,79 @@
+# Routing Paths
+
+This page covers how MeshCore Open represents, selects, validates, and stores routing paths in the UI and data layer.
+
+## Path Routing
+
+MeshCore supports variable-length multi-byte routing paths so the app can scale from small meshes to very large node sets.
+
+### Hash Width and Multi-Byte Paths
+
+The device capability determines the hash width (number of bytes per hop):
+
+| Width | Max Unique Nodes | Typical Use |
+|-------|-----------------|-------------|
+| 1 byte | 256 | Single-byte node IDs |
+| 2 bytes | 65,536 | Medium meshes |
+| 3 bytes | 16.7M | Large networks |
+| 4 bytes | 4.3G | Very large meshes / future-proofing |
+
+### Device Capability Detection
+
+On device connection, the app reads the firmware capability to set `pathHashByteWidth`:
+
+```dart
+// Read from device info response (offset 81)
+final modeRaw = firmwareBytes.length >= 82
+    ? (firmwareBytes[81] & 0xFF)
+    : 0;
+final mode = modeRaw.clamp(0, 3);
+_pathHashByteWidth = mode + 1; // 1, 2, 3, or 4 bytes per hop
+```
+
+The connector reads a single-mode byte and clamps to `0..3`, so the supported hop width is `1..4` bytes. UI code also clamps widths when rendering (typically to `1..4`) so 4-byte hops are handled end-to-end in the current codebase.
+
+### Path Data Structure
+
+Paths in messages and storage consist of:
+
+ - **`pathLength` (model/storage)**: Hop count (number of hops). Negative values (e.g. `-1`) are used as a flood sentinel.
+ - **On-air `path_len` byte**: A packed byte that encodes hop count + hash width and is decoded into `pathLength` + `pathBytes` when parsing frames.
+ - **`pathBytes`**: Raw bytes of the path (concatenated hop prefixes), grouped by `pathHashByteWidth`.
+ - **`hopCount`**: Derived display value computed from bytes and width: `(byteCount + hashByteWidth - 1) ~/ hashByteWidth`.
+ - **Example**: With `pathHashByteWidth=2`, a 3-hop path has 6 bytes (`pathBytes.length = 6`) and `pathLength = 3`:
+  - `pathBytes = [0xA1, 0xA2, 0xB1, 0xB2, 0xC1, 0xC2]`
+  - Hops: `[0xA1A2]`, `[0xB1B2]`, `[0xC1C2]`
+
+### Hop Count Calculation
+
+Convert path byte length to hop count:
+
+```dart
+int hopCount = (byteCount + hashByteWidth - 1) ~/ hashByteWidth;
+```
+
+Use this consistently when displaying hop counts in UI. Do not treat `pathLength` as a hop count when the path uses multi-byte hop hashes.
+
+### Path Usage in Different Message Types
+
+- **Direct messages**: Extract path from decrypted payload to trace sender route.
+- **Channel messages**: Decrypt hop-by-hop routing chain from payload; the header carries the encoded byte length for the path blob, not the derived hop count.
+- **Contact storage**: Path length in byte 32, raw path bytes in bytes 33-96, grouped by detected `pathHashByteWidth`.
+
+### UI Hop Count Display
+
+⚠️ **Important**: In screens like "Channel Message Path", prefer the actual decoded `pathBytes` hop count over `pathLength` metadata:
+
+```dart
+// Preferred: use actual observed path length
+final effectiveHopCount = (pathBytes.length + width - 1) ~/ width;
+
+// Avoid: using encoded byte length as if it were a hop count
+// pathLength is bytes; converting it twice causes inflated counts
+```
+
+Example scenario:
+- Radio header reports `pathLength: 32` bytes
+- Decoded path bytes: `[0xAB, 0xCD]` (2 bytes = 1 hop with width=2)
+- **Display**: "1 hop" (from `pathBytes`), not "32 hops" (which would double-count the encoded length)
+

documentation/scanner-and-connection.md

@@ -28,9 +28,11 @@ The BLE Scanner is the app's home screen, displayed immediately on launch.
 
 **Device List**: When no devices are found, shows a large Bluetooth icon with a prompt. The prompt text is dynamic: "Searching for devices..." while actively scanning, or "Tap Scan to search" when idle. When devices are found, shows a scrollable list of `DeviceTile` widgets.
 
-**Bottom FAB Row**: Up to three floating action buttons:
-- **USB** button - Opens USB connection screen (Android, Windows, Linux, macOS, Chrome web only)
-- **TCP/IP** button - Opens TCP connection screen (all non-web platforms)
+**App Bar Actions**: Icon buttons in the top-right corner of the app bar:
+- **USB** icon button - Opens USB connection screen (Android, Windows, Linux, macOS, Chrome web only)
+- **TCP/IP** icon button - Opens TCP connection screen (all non-web platforms)
+
+**Bottom FAB**: A single floating action button:
 - **BLE Scan** button - Toggles BLE scanning on/off; shows a spinner when scanning. **Disabled** (greyed out, not tappable) when Bluetooth is off
 
 ### Device Tile
@@ -51,7 +53,7 @@ Note: The weak (-80 to -90 dBm) and poor (< -90 dBm) tiers share the same icon s
 
 ### How Scanning Works
 
-- Filters for devices with names starting with `MeshCore-` or `Whisper-`
+- Filters for devices advertising the Nordic UART Service UUID (so community forks with non-standard names are still found). Known name prefixes used by stock firmware builds for reference: `MeshCore-`, `Whisper-`, `WisCore-`, `Seeed`, `Lilygo`, `HT-`, `LowMesh_MC_`, `NRF52`
 - Uses low-latency scan mode on Android
 - Scans for 10 seconds then auto-stops
 - On iOS/macOS, waits for BLE adapter initialization before starting
@@ -61,11 +63,11 @@ Note: The weak (-80 to -90 dBm) and poor (< -90 dBm) tiers share the same icon s
 
 Tap a device tile or its Connect button:
 1. The connector stops scanning and transitions to "connecting"
-2. Connects to the device with a 15-second timeout
+2. Connects to the device with a 15-second timeout (6 seconds on Linux)
 3. Requests MTU 185 bytes for optimal throughput
 4. Discovers BLE services and locates the Nordic UART Service
 5. Subscribes to TX notifications for receiving data
-6. On success, automatically navigates to the Contacts screen
+6. On success, automatically navigates to the Channels screen
 7. On failure, shows a red error snackbar
 
 ---
@@ -74,7 +76,7 @@ Tap a device tile or its Connect button:
 
 ### How to Access
 
-From the Scanner screen, tap the **USB** FAB button.
+From the Scanner screen, tap the **USB** icon button in the app bar.
 
 ### What the User Sees
 
@@ -82,15 +84,15 @@ From the Scanner screen, tap the **USB** FAB button.
 - A list of detected USB serial ports, each showing:
   - Friendly display name
   - Raw port name (subtitle, only shown when it differs from the display name)
-  - "Connect" button
-- FABs at the bottom to switch to BLE or TCP (these use `pushReplacement`, so back navigation returns to Scanner, not between USB/TCP)
+  - Chevron trailing icon (the entire tile is tappable to connect)
+- Transport switcher buttons (outlined, not FABs) to switch to BLE or TCP (these use `pushReplacement`, so back navigation returns to Scanner, not between USB/TCP)
 
 ### Key Interactions
 
 - On desktop (Windows, Linux, macOS): ports are polled every 2 seconds for hot-plug detection (polling pauses while connecting/connected)
 - On mobile: tap the "Scan" FAB to manually refresh
-- Tap a port or its Connect button to connect
-- On successful connection, navigates to Contacts screen
+- Tap a port tile to connect
+- On successful connection, navigates to Channels screen
 - On connection failure, the port list automatically refreshes
 - Platform-specific error messages for common USB failures (permission denied, device missing, device detached, device busy, driver missing, port invalid, timeout, and more)
 
@@ -100,7 +102,7 @@ From the Scanner screen, tap the **USB** FAB button.
 
 ### How to Access
 
-From the Scanner screen, tap the **TCP/IP** FAB button.
+From the Scanner screen, tap the **TCP/IP** icon button in the app bar.
 
 ### What the User Sees
 
@@ -108,7 +110,7 @@ From the Scanner screen, tap the **TCP/IP** FAB button.
 - **Host address** text field
 - **Port number** text field
 - **Connect** button
-- FABs at the bottom to switch to USB or BLE
+- Transport switcher buttons (outlined, not FABs) to switch to USB or BLE
 
 ### Key Interactions
 
@@ -119,6 +121,6 @@ From the Scanner screen, tap the **TCP/IP** FAB button.
   - Validation errors are shown as red snackbars
 - The Connect button shows a spinner and "Connecting..." label while in progress
 - The status bar shows the specific host:port being connected to (e.g., "Connecting to 192.168.1.1:5000")
-- On success, navigates to Contacts screen and saves the host/port to settings
+- On success, navigates to Channels screen and saves the host/port to settings
 - On connection, the status bar shows the active TCP endpoint (e.g., "Connected to 192.168.1.1:5000")
 - Error messages for timeout, unsupported platform, and connection failures

documentation/settings.md

@@ -12,12 +12,13 @@ Settings are only accessible while a device is connected.
 The settings screen is a scrollable list of cards:
 
 1. [Device Info](#device-info)
-2. [App Settings](#app-settings) (link to sub-screen)
-3. [Node Settings](#node-settings)
-4. [Actions](#actions)
-5. [Debug](#debug)
+2. [Node Settings](#node-settings)
+3. [Location](#location)
+4. [App Settings](#app-settings) (link to sub-screen)
+5. [Actions](#actions)
 6. [Export](#export)
-7. [About](#about)
+7. [Debug](#debug)
+8. [About](#about)
 
 ---
 
@@ -40,46 +41,6 @@ Battery shows an alert icon and orange text when at 15% or below. The toggle onl
 
 ---
 
-## App Settings
-
-A dedicated sub-screen for app-level preferences (nothing here is sent to the device). All settings persist locally via SharedPreferences.
-
-### Appearance
-- **Theme**: System / Light / Dark
-- **Language**: System default or one of 15 languages (English, French, Spanish, German, Polish, Slovenian, Portuguese, Italian, Chinese, Swedish, Dutch, Slovak, Bulgarian, Russian, Ukrainian)
-- **Enable Message Tracing**: Shows path trace overlays and extra metadata on messages
-
-### Notifications
-- **Master enable/disable**: Requests OS permission when enabling
-- **Message notifications**: New direct message alerts
-- **Channel message notifications**: New channel message alerts
-- **Advertisement notifications**: New node discovery alerts
-
-### Messaging
-- **Clear Path on Max Retry**: Erases the stored routing path after all retries fail
-- **Auto Route Rotation**: Enables weighted routing algorithm. When enabled, expands to show five slider sub-settings (hidden when off):
-  - Max Route Weight (1–10, default 5, integer steps)
-  - Initial Route Weight (0.5–5.0, default 3.0)
-  - Success Increment (0.1–2.0, default 0.5, 0.1 steps)
-  - Failure Decrement (0.1–2.0, default 0.2, 0.1 steps)
-  - Max Message Retries (2–10, default 5)
-
-### Battery
-- **Battery Chemistry**: NMC / LiFePO4 / LiPo (per device, used to calibrate percentage from voltage)
-
-### Map Display
-- **Show Repeaters**: Toggle repeater markers on map
-- **Show Chat Nodes**: Toggle chat node markers
-- **Show Other Nodes**: Toggle room/sensor markers
-- **Time Filter**: All time / Last 1h / Last 6h / Last 24h / Last week
-- **Units**: Metric / Imperial
-- **Offline Map Cache**: Navigate to tile download screen
-
-### Debug
-- **App Debug Logging**: Enable the in-app debug log
-
----
-
 ## Node Settings
 
 These settings are sent directly to the connected device firmware.
@@ -91,7 +52,7 @@ These settings are sent directly to the connected device firmware.
 
 ### Radio Settings
 Opens a dialog pre-populated with the device's current radio settings. Contains:
-- **Preset dropdown**: 19 regional presets — selecting a preset immediately fills all fields below. Full list: Australia, Australia (Narrow), Australia SA/WA/QLD, Czech Republic, EU 433MHz, EU/UK (Long Range), EU/UK (Medium Range), EU/UK (Narrow), New Zealand, New Zealand (Narrow), Portugal 433, Portugal 869, Switzerland, USA Arizona, USA/Canada, Vietnam, Off-Grid 433, Off-Grid 869, Off-Grid 918
+- **Preset dropdown**: Regional presets — selecting a preset immediately fills all fields below. Includes presets for Australia, Australia (Narrow), Australia (Mid), Australia SA WA QLD, Czech Republic, EU 433MHz, EU/UK (Long Range), EU/UK (Medium Range), EU/UK (Narrow), New Zealand, New Zealand (Narrow), Portugal 433, Portugal 869, numerous Russia city presets, Switzerland, USA Arizona, USA/Canada, and Vietnam
 - **Frequency** (MHz): Free text, validated 300–2500 MHz
 - **Bandwidth**: Dropdown (7.8 / 10.4 / 15.6 / 20.8 / 31.25 / 41.7 / 62.5 / 125 / 250 / 500 kHz)
 - **Spreading Factor**: SF5–SF12
@@ -99,6 +60,13 @@ Opens a dialog pre-populated with the device's current radio settings. Contains:
 - **TX Power** (dBm): Validated 0 to device max (typically 22 dBm)
 - **Client Repeat** toggle: Only shown on firmware v9+; requires frequency to be exactly 433.000, 869.000, or 918.000 MHz (the Off-Grid presets). Save is blocked with a warning if enabled on other frequencies
 
+### Companion Radio Stats
+Opens the RF statistics screen (RSSI, SNR, packet counts) for the paired radio. Only enabled when connected to a device that supports companion radio stats.
+
+---
+
+## Location
+
 ### Location
 Opens a dialog pre-populated with the device's current coordinates (if known):
 - Latitude and longitude fields (decimal, 6 decimal places). If only one field is provided, the other uses the device's current value
@@ -115,8 +83,72 @@ Five toggles controlling which node types are auto-added when heard:
 - Auto-add Sensors
 - Overwrite Oldest (when contact list is full)
 
-### Privacy Mode
-Opens a confirmation dialog with three buttons: Cancel, Enable, and Disable. Both states can be set from the same dialog regardless of current state. A snackbar confirms which state was applied. When on, the node stops broadcasting its location in advertisements.
+### Privacy
+Opens a dialog with controls for how the node shares telemetry and location data:
+- **Advert Location**: Toggle whether the node broadcasts its location in advertisements
+- **Multi-Ack**: Toggle multi-ack delivery confirmations
+- **Telemetry Base Mode**: Deny All / Allow by Contact / Allow All
+- **Telemetry Location Mode**: Deny All / Allow by Contact / Allow All
+- **Telemetry Environment Mode**: Deny All / Allow by Contact / Allow All
+
+Settings take effect when saved. A snackbar confirms the update.
+
+---
+
+## App Settings
+
+A dedicated sub-screen for app-level preferences (nothing here is sent to the device). All settings persist locally via SharedPreferences.
+
+### Appearance
+- **Theme**: System / Light / Dark
+- **Language**: System default or one of 18 languages (English, French, Spanish, German, Polish, Slovenian, Portuguese, Italian, Chinese, Swedish, Dutch, Slovak, Bulgarian, Russian, Ukrainian, Hungarian, Japanese, Korean)
+
+### Notifications
+- **Master enable/disable**: Requests OS permission when enabling
+- **Message notifications**: New direct message alerts
+- **Channel message notifications**: New channel message alerts
+- **Advertisement notifications**: New node discovery alerts
+
+### Messaging
+- **Clear Path on Max Retry**: Erases the stored routing path after all retries fail
+- **Jump to Oldest Unread**: When opening a chat, scrolls to the oldest unread message instead of the newest
+- **Auto Route Rotation**: Enables weighted routing algorithm. When enabled, expands to show five slider sub-settings (hidden when off):
+  - Max Route Weight (1–10, default 5, integer steps)
+  - Initial Route Weight (0.5–5.0, default 3.0)
+  - Success Increment (0.1–2.0, default 0.5, 0.1 steps)
+  - Failure Decrement (0.1–2.0, default 0.2, 0.1 steps)
+  - Max Message Retries (2–10, default 5)
+- **Enable Message Tracing**: Shows path trace overlays and extra metadata on messages
+
+### Battery
+- **Battery Chemistry**: NMC / LiFePO4 / LiPo (per device, used to calibrate percentage from voltage)
+
+### Map Display
+- **Show Repeaters**: Toggle repeater markers on map
+- **Show Chat Nodes**: Toggle chat node markers
+- **Show Other Nodes**: Toggle room/sensor markers
+- **Time Filter**: All time / Last 1h / Last 6h / Last 24h / Last week
+- **Units**: Metric / Imperial
+- **Raster Tile Source**: Sets the MAP theme and with that from where to get the map tile data:
+  - OpenStreetMap (Auto/Standard/Dark) is provided by the free OpenStreetMap tile server. (Can only be used for live view or already cached.)
+  - Stamen Terrain / AlidadeSmooth Dark / Outdoors / OSM Bright are [StadiaMaps.com raster tile maps](https://stadiamaps.com/products/maps/interactive-basemaps/) for which you can choose an Hosted Endpoint (Worldwide / Europe hosted) and have to provide the API key to your subscription. (You can cache these maps for offline Map usage.)
+  There will be no account provided by meshcore-open. You will have to get you own subscription. StadiaMaps offers a [free](https://stadiamaps.com/pricing/) subscription to download up to 200'000 Standart Raster Basemap tiles.
+- **Offline Map Cache**: Navigate to tile download screen
+
+### Translation
+Not shown on web. Controls on-device message translation powered by a locally-downloaded ML model:
+- **Enable Translation**: Translates incoming messages into the selected target language
+- **Translate Composer**: Translates outgoing messages from the target language back before sending
+- **Target Language**: Language to translate into (searchable list; defaults to the app language)
+- **Downloaded Model**: Dropdown to select among already-downloaded translation models
+- **Preset Model**: Download a curated preset model with one tap
+- **Custom Model URL**: Enter a URL to download a custom GGUF-format model; shows download progress and a cancel button
+
+### Cyrillic-to-Latin (Cyr2Lat)
+Controls character substitution profiles used to render Cyrillic text in Latin characters. A dropdown selects the active profile; Add, Edit, and Delete buttons manage the profile list (the last remaining profile cannot be deleted). Each profile stores a JSON character map.
+
+### Debug
+- **App Debug Logging**: Enable the in-app debug log
 
 ---
 
@@ -126,10 +158,24 @@ One-tap device operations:
 
 | Action | Description |
 |---|---|
-| Send Advertisement | Floods the mesh with your node's advertisement |
 | Sync Time | Sends current Unix timestamp to the device |
 | Refresh Contacts | Re-requests the full contact list |
-| Reboot Device | Confirmation dialog → reboots the device (shown in orange) |
+| Reboot Device | Confirmation dialog → reboots the device (shown in warning color) |
+| Delete All Paths | Confirmation dialog → clears all stored routing paths (shown in alert color) |
+
+---
+
+## Export
+
+Three GPX export options (not available on web):
+
+| Option | Exports |
+|---|---|
+| Export Repeaters | Repeaters and Rooms with GPS coordinates |
+| Export Contacts | Chat contacts with GPS coordinates |
+| Export All | All contacts with GPS coordinates |
+
+Each creates a `.gpx` file and opens the OS share sheet. Feedback via snackbar for four outcomes: success, no contacts with coordinates, feature not available (web), or error.
 
 ---
 
@@ -150,20 +196,6 @@ Structured log entries (Info / Warning / Error), with tag, message, and timestam
 
 ---
 
-## Export
-
-Three GPX export options (not available on web):
-
-| Option | Exports |
-|---|---|
-| Export Repeaters | Repeaters and Rooms with GPS coordinates |
-| Export Contacts | Chat contacts with GPS coordinates |
-| Export All | All contacts with GPS coordinates |
-
-Each creates a `.gpx` file and opens the OS share sheet. Feedback via snackbar for four outcomes: success, no contacts with coordinates, feature not available (web), or error.
-
----
-
 ## About
 
 Shows the standard Flutter about dialog with app name, version, and legal notice.

ios/ExportOptions.plist

@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>method</key>
+	<string>app-store-connect</string>
+	<key>teamID</key>
+	<string>X74VJ4UAST</string>
+	<key>signingStyle</key>
+	<string>automatic</string>
+	<key>uploadSymbols</key>
+	<true/>
+	<key>destination</key>
+	<string>export</string>
+</dict>
+</plist>

ios/Flutter/AppFrameworkInfo.plist

@@ -20,7 +20,5 @@
   <string>????</string>
   <key>CFBundleVersion</key>
   <string>1.0</string>
-  <key>MinimumOSVersion</key>
-  <string>13.0</string>
 </dict>
 </plist>

ios/Podfile

@@ -1,4 +1,4 @@
-platform :ios, '15.5'
+platform :ios, '16.4'
 
 ENV['COCOAPODS_DISABLE_STATS'] = 'true'
 
@@ -32,5 +32,8 @@ end
 post_install do |installer|
   installer.pods_project.targets.each do |target|
     flutter_additional_ios_build_settings(target)
+    target.build_configurations.each do |config|
+      config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '16.4'
+    end
   end
 end

ios/Podfile.lock

@@ -1,145 +1,22 @@
 PODS:
   - Flutter (1.0.0)
-  - flutter_blue_plus_darwin (0.0.2):
-    - Flutter
-    - FlutterMacOS
   - flutter_foreground_task (0.0.1):
     - Flutter
-  - flutter_local_notifications (0.0.1):
-    - Flutter
-  - GoogleDataTransport (10.1.0):
-    - nanopb (~> 3.30910.0)
-    - PromisesObjC (~> 2.4)
-  - GoogleMLKit/BarcodeScanning (7.0.0):
-    - GoogleMLKit/MLKitCore
-    - MLKitBarcodeScanning (~> 6.0.0)
-  - GoogleMLKit/MLKitCore (7.0.0):
-    - MLKitCommon (~> 12.0.0)
-  - GoogleToolboxForMac/Defines (4.2.1)
-  - GoogleToolboxForMac/Logger (4.2.1):
-    - GoogleToolboxForMac/Defines (= 4.2.1)
-  - "GoogleToolboxForMac/NSData+zlib (4.2.1)":
-    - GoogleToolboxForMac/Defines (= 4.2.1)
-  - GoogleUtilities/Environment (8.1.0):
-    - GoogleUtilities/Privacy
-  - GoogleUtilities/Logger (8.1.0):
-    - GoogleUtilities/Environment
-    - GoogleUtilities/Privacy
-  - GoogleUtilities/Privacy (8.1.0)
-  - GoogleUtilities/UserDefaults (8.1.0):
-    - GoogleUtilities/Logger
-    - GoogleUtilities/Privacy
-  - GTMSessionFetcher/Core (3.5.0)
-  - MLImage (1.0.0-beta6)
-  - MLKitBarcodeScanning (6.0.0):
-    - MLKitCommon (~> 12.0)
-    - MLKitVision (~> 8.0)
-  - MLKitCommon (12.0.0):
-    - GoogleDataTransport (~> 10.0)
-    - GoogleToolboxForMac/Logger (< 5.0, >= 4.2.1)
-    - "GoogleToolboxForMac/NSData+zlib (< 5.0, >= 4.2.1)"
-    - GoogleUtilities/Logger (~> 8.0)
-    - GoogleUtilities/UserDefaults (~> 8.0)
-    - GTMSessionFetcher/Core (< 4.0, >= 3.3.2)
-  - MLKitVision (8.0.0):
-    - GoogleToolboxForMac/Logger (< 5.0, >= 4.2.1)
-    - "GoogleToolboxForMac/NSData+zlib (< 5.0, >= 4.2.1)"
-    - GTMSessionFetcher/Core (< 4.0, >= 3.3.2)
-    - MLImage (= 1.0.0-beta6)
-    - MLKitCommon (~> 12.0)
-  - mobile_scanner (6.0.2):
-    - Flutter
-    - GoogleMLKit/BarcodeScanning (~> 7.0.0)
-  - nanopb (3.30910.0):
-    - nanopb/decode (= 3.30910.0)
-    - nanopb/encode (= 3.30910.0)
-  - nanopb/decode (3.30910.0)
-  - nanopb/encode (3.30910.0)
-  - package_info_plus (0.4.5):
-    - Flutter
-  - PromisesObjC (2.4.0)
-  - shared_preferences_foundation (0.0.1):
-    - Flutter
-    - FlutterMacOS
-  - sqflite_darwin (0.0.4):
-    - Flutter
-    - FlutterMacOS
-  - url_launcher_ios (0.0.1):
-    - Flutter
-  - wakelock_plus (0.0.1):
-    - Flutter
 
 DEPENDENCIES:
   - Flutter (from `Flutter`)
-  - flutter_blue_plus_darwin (from `.symlinks/plugins/flutter_blue_plus_darwin/darwin`)
   - flutter_foreground_task (from `.symlinks/plugins/flutter_foreground_task/ios`)
-  - flutter_local_notifications (from `.symlinks/plugins/flutter_local_notifications/ios`)
-  - mobile_scanner (from `.symlinks/plugins/mobile_scanner/ios`)
-  - package_info_plus (from `.symlinks/plugins/package_info_plus/ios`)
-  - shared_preferences_foundation (from `.symlinks/plugins/shared_preferences_foundation/darwin`)
-  - sqflite_darwin (from `.symlinks/plugins/sqflite_darwin/darwin`)
-  - url_launcher_ios (from `.symlinks/plugins/url_launcher_ios/ios`)
-  - wakelock_plus (from `.symlinks/plugins/wakelock_plus/ios`)
-
-SPEC REPOS:
-  trunk:
-    - GoogleDataTransport
-    - GoogleMLKit
-    - GoogleToolboxForMac
-    - GoogleUtilities
-    - GTMSessionFetcher
-    - MLImage
-    - MLKitBarcodeScanning
-    - MLKitCommon
-    - MLKitVision
-    - nanopb
-    - PromisesObjC
 
 EXTERNAL SOURCES:
   Flutter:
     :path: Flutter
-  flutter_blue_plus_darwin:
-    :path: ".symlinks/plugins/flutter_blue_plus_darwin/darwin"
   flutter_foreground_task:
     :path: ".symlinks/plugins/flutter_foreground_task/ios"
-  flutter_local_notifications:
-    :path: ".symlinks/plugins/flutter_local_notifications/ios"
-  mobile_scanner:
-    :path: ".symlinks/plugins/mobile_scanner/ios"
-  package_info_plus:
-    :path: ".symlinks/plugins/package_info_plus/ios"
-  shared_preferences_foundation:
-    :path: ".symlinks/plugins/shared_preferences_foundation/darwin"
-  sqflite_darwin:
-    :path: ".symlinks/plugins/sqflite_darwin/darwin"
-  url_launcher_ios:
-    :path: ".symlinks/plugins/url_launcher_ios/ios"
-  wakelock_plus:
-    :path: ".symlinks/plugins/wakelock_plus/ios"
 
 SPEC CHECKSUMS:
   Flutter: cabc95a1d2626b1b06e7179b784ebcf0c0cde467
-  flutter_blue_plus_darwin: 20a08bfeaa0f7804d524858d3d8744bcc1b6dbc3
   flutter_foreground_task: a159d2c2173b33699ddb3e6c2a067045d7cebb89
-  flutter_local_notifications: 395056b3175ba4f08480a7c5de30cd36d69827e4
-  GoogleDataTransport: aae35b7ea0c09004c3797d53c8c41f66f219d6a7
-  GoogleMLKit: eff9e23ec1d90ea4157a1ee2e32a4f610c5b3318
-  GoogleToolboxForMac: d1a2cbf009c453f4d6ded37c105e2f67a32206d8
-  GoogleUtilities: 00c88b9a86066ef77f0da2fab05f65d7768ed8e1
-  GTMSessionFetcher: 5aea5ba6bd522a239e236100971f10cb71b96ab6
-  MLImage: 0ad1c5f50edd027672d8b26b0fee78a8b4a0fc56
-  MLKitBarcodeScanning: 0a3064da0a7f49ac24ceb3cb46a5bc67496facd2
-  MLKitCommon: 07c2c33ae5640e5380beaaa6e4b9c249a205542d
-  MLKitVision: 45e79d68845a2de77e2dd4d7f07947f0ed157b0e
-  mobile_scanner: af8f71879eaba2bbcb4d86c6a462c3c0e7f23036
-  nanopb: fad817b59e0457d11a5dfbde799381cd727c1275
-  package_info_plus: af8e2ca6888548050f16fa2f1938db7b5a5df499
-  PromisesObjC: f5707f49cb48b9636751c5b2e7d227e43fba9f47
-  shared_preferences_foundation: 7036424c3d8ec98dfe75ff1667cb0cd531ec82bb
-  sqflite_darwin: 20b2a3a3b70e43edae938624ce550a3cbf66a3d0
-  url_launcher_ios: 7a95fa5b60cc718a708b8f2966718e93db0cef1b
-  wakelock_plus: e29112ab3ef0b318e58cfa5c32326458be66b556
 
-PODFILE CHECKSUM: 570da2a631486c6bd6496bed1e605e63e2471be5
+PODFILE CHECKSUM: e42b502c78c33aa1ed9d42eaea8960ce2139504b
 
 COCOAPODS: 1.16.2

ios/Runner.xcodeproj/project.pbxproj

@@ -11,6 +11,7 @@
 		331C808B294A63AB00263BE5 /* RunnerTests.swift in Sources */ = {isa = PBXBuildFile; fileRef = 331C807B294A618700263BE5 /* RunnerTests.swift */; };
 		3B3967161E833CAA004F5970 /* AppFrameworkInfo.plist in Resources */ = {isa = PBXBuildFile; fileRef = 3B3967151E833CAA004F5970 /* AppFrameworkInfo.plist */; };
 		74858FAF1ED2DC5600515810 /* AppDelegate.swift in Sources */ = {isa = PBXBuildFile; fileRef = 74858FAE1ED2DC5600515810 /* AppDelegate.swift */; };
+		78A318202AECB46A00862997 /* FlutterGeneratedPluginSwiftPackage in Frameworks */ = {isa = PBXBuildFile; productRef = 78A3181F2AECB46A00862997 /* FlutterGeneratedPluginSwiftPackage */; };
 		97C146FC1CF9000F007C117D /* Main.storyboard in Resources */ = {isa = PBXBuildFile; fileRef = 97C146FA1CF9000F007C117D /* Main.storyboard */; };
 		97C146FE1CF9000F007C117D /* Assets.xcassets in Resources */ = {isa = PBXBuildFile; fileRef = 97C146FD1CF9000F007C117D /* Assets.xcassets */; };
 		97C147011CF9000F007C117D /* LaunchScreen.storyboard in Resources */ = {isa = PBXBuildFile; fileRef = 97C146FF1CF9000F007C117D /* LaunchScreen.storyboard */; };
@@ -52,6 +53,7 @@
 		718BC7DCCFC5C370705C12E5 /* Pods-Runner.profile.xcconfig */ = {isa = PBXFileReference; includeInIndex = 1; lastKnownFileType = text.xcconfig; name = "Pods-Runner.profile.xcconfig"; path = "Target Support Files/Pods-Runner/Pods-Runner.profile.xcconfig"; sourceTree = "<group>"; };
 		74858FAD1ED2DC5600515810 /* Runner-Bridging-Header.h */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.h; path = "Runner-Bridging-Header.h"; sourceTree = "<group>"; };
 		74858FAE1ED2DC5600515810 /* AppDelegate.swift */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.swift; path = AppDelegate.swift; sourceTree = "<group>"; };
+		78E0A7A72DC9AD7400C4905E /* FlutterGeneratedPluginSwiftPackage */ = {isa = PBXFileReference; lastKnownFileType = wrapper; name = FlutterGeneratedPluginSwiftPackage; path = Flutter/ephemeral/Packages/FlutterGeneratedPluginSwiftPackage; sourceTree = "<group>"; };
 		7AFA3C8E1D35360C0083082E /* Release.xcconfig */ = {isa = PBXFileReference; lastKnownFileType = text.xcconfig; name = Release.xcconfig; path = Flutter/Release.xcconfig; sourceTree = "<group>"; };
 		9740EEB21CF90195004384FC /* Debug.xcconfig */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = text.xcconfig; name = Debug.xcconfig; path = Flutter/Debug.xcconfig; sourceTree = "<group>"; };
 		9740EEB31CF90195004384FC /* Generated.xcconfig */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = text.xcconfig; name = Generated.xcconfig; path = Flutter/Generated.xcconfig; sourceTree = "<group>"; };
@@ -67,6 +69,7 @@
 			isa = PBXFrameworksBuildPhase;
 			buildActionMask = 2147483647;
 			files = (
+				78A318202AECB46A00862997 /* FlutterGeneratedPluginSwiftPackage in Frameworks */,
 				9A698254711B63C3940A64CB /* libPods-Runner.a in Frameworks */,
 			);
 			runOnlyForDeploymentPostprocessing = 0;
@@ -85,6 +88,7 @@
 		9740EEB11CF90186004384FC /* Flutter */ = {
 			isa = PBXGroup;
 			children = (
+				78E0A7A72DC9AD7400C4905E /* FlutterGeneratedPluginSwiftPackage */,
 				3B3967151E833CAA004F5970 /* AppFrameworkInfo.plist */,
 				9740EEB21CF90195004384FC /* Debug.xcconfig */,
 				7AFA3C8E1D35360C0083082E /* Release.xcconfig */,
@@ -179,13 +183,16 @@
 				97C146EC1CF9000F007C117D /* Resources */,
 				9705A1C41CF9048500538489 /* Embed Frameworks */,
 				3B06AD1E1E4923F5004D2608 /* Thin Binary */,
-				B788CEDB957A87EE8AC593BB /* [CP] Copy Pods Resources */,
+				F0D7F2413C6E4B7A9B1C2D3E /* Fix Native Asset Minimum OS */,
 			);
 			buildRules = (
 			);
 			dependencies = (
 			);
 			name = Runner;
+			packageProductDependencies = (
+				78A3181F2AECB46A00862997 /* FlutterGeneratedPluginSwiftPackage */,
+			);
 			productName = Runner;
 			productReference = 97C146EE1CF9000F007C117D /* Runner.app */;
 			productType = "com.apple.product-type.application";
@@ -219,6 +226,9 @@
 				Base,
 			);
 			mainGroup = 97C146E51CF9000F007C117D;
+			packageReferences = (
+				781AD8BC2B33823900A9FFBB /* XCLocalSwiftPackageReference "FlutterGeneratedPluginSwiftPackage" */,
+			);
 			productRefGroup = 97C146EF1CF9000F007C117D /* Products */;
 			projectDirPath = "";
 			projectRoot = "";
@@ -282,23 +292,6 @@
 			shellPath = /bin/sh;
 			shellScript = "/bin/sh \"$FLUTTER_ROOT/packages/flutter_tools/bin/xcode_backend.sh\" build";
 		};
-		B788CEDB957A87EE8AC593BB /* [CP] Copy Pods Resources */ = {
-			isa = PBXShellScriptBuildPhase;
-			buildActionMask = 2147483647;
-			files = (
-			);
-			inputFileListPaths = (
-				"${PODS_ROOT}/Target Support Files/Pods-Runner/Pods-Runner-resources-${CONFIGURATION}-input-files.xcfilelist",
-			);
-			name = "[CP] Copy Pods Resources";
-			outputFileListPaths = (
-				"${PODS_ROOT}/Target Support Files/Pods-Runner/Pods-Runner-resources-${CONFIGURATION}-output-files.xcfilelist",
-			);
-			runOnlyForDeploymentPostprocessing = 0;
-			shellPath = /bin/sh;
-			shellScript = "\"${PODS_ROOT}/Target Support Files/Pods-Runner/Pods-Runner-resources.sh\"\n";
-			showEnvVarsInLog = 0;
-		};
 		DE3B2E091393835C0B38492E /* [CP] Check Pods Manifest.lock */ = {
 			isa = PBXShellScriptBuildPhase;
 			buildActionMask = 2147483647;
@@ -321,6 +314,22 @@
 			shellScript = "diff \"${PODS_PODFILE_DIR_PATH}/Podfile.lock\" \"${PODS_ROOT}/Manifest.lock\" > /dev/null\nif [ $? != 0 ] ; then\n    # print error to STDERR\n    echo \"error: The sandbox is not in sync with the Podfile.lock. Run 'pod install' or update your CocoaPods installation.\" >&2\n    exit 1\nfi\n# This output is used by Xcode 'outputs' to avoid re-running this script phase.\necho \"SUCCESS\" > \"${SCRIPT_OUTPUT_FILE_0}\"\n";
 			showEnvVarsInLog = 0;
 		};
+		F0D7F2413C6E4B7A9B1C2D3E /* Fix Native Asset Minimum OS */ = {
+			isa = PBXShellScriptBuildPhase;
+			alwaysOutOfDate = 1;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			inputPaths = (
+				"${TARGET_BUILD_DIR}/${FRAMEWORKS_FOLDER_PATH}",
+			);
+			name = "Fix Native Asset Minimum OS";
+			outputPaths = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+			shellPath = /bin/sh;
+			shellScript = "set -e\nFRAMEWORKS_DIR=\"${TARGET_BUILD_DIR}/${FRAMEWORKS_FOLDER_PATH}\"\nMIN_OS=\"${IPHONEOS_DEPLOYMENT_TARGET}\"\nif [ ! -d \"$FRAMEWORKS_DIR\" ] || [ -z \"$MIN_OS\" ]; then\n  exit 0\nfi\nfind \"$FRAMEWORKS_DIR\" -maxdepth 2 -name Info.plist | while read -r plist; do\n  bundle_id=$(/usr/libexec/PlistBuddy -c 'Print :CFBundleIdentifier' \"$plist\" 2>/dev/null || true)\n  case \"$bundle_id\" in\n    io.flutter.flutter.native-assets.*)\n      /usr/libexec/PlistBuddy -c \"Set :MinimumOSVersion $MIN_OS\" \"$plist\" 2>/dev/null || \\\n      /usr/libexec/PlistBuddy -c \"Add :MinimumOSVersion string $MIN_OS\" \"$plist\"\n      ;;\n  esac\ndone\n";
+		};
 /* End PBXShellScriptBuildPhase section */
 
 /* Begin PBXSourcesBuildPhase section */
@@ -414,7 +423,7 @@
 				GCC_WARN_UNINITIALIZED_AUTOS = YES_AGGRESSIVE;
 				GCC_WARN_UNUSED_FUNCTION = YES;
 				GCC_WARN_UNUSED_VARIABLE = YES;
-				IPHONEOS_DEPLOYMENT_TARGET = 13.0;
+				IPHONEOS_DEPLOYMENT_TARGET = 16.4;
 				MTL_ENABLE_DEBUG_INFO = NO;
 				SDKROOT = iphoneos;
 				SUPPORTED_PLATFORMS = iphoneos;
@@ -429,7 +438,9 @@
 			buildSettings = {
 				ASSETCATALOG_COMPILER_APPICON_NAME = AppIcon;
 				CLANG_ENABLE_MODULES = YES;
+				CODE_SIGN_STYLE = Automatic;
 				CURRENT_PROJECT_VERSION = "$(FLUTTER_BUILD_NUMBER)";
+				DEVELOPMENT_TEAM = X74VJ4UAST;
 				ENABLE_BITCODE = NO;
 				INFOPLIST_FILE = Runner/Info.plist;
 				LD_RUNPATH_SEARCH_PATHS = (
@@ -540,7 +551,7 @@
 				GCC_WARN_UNINITIALIZED_AUTOS = YES_AGGRESSIVE;
 				GCC_WARN_UNUSED_FUNCTION = YES;
 				GCC_WARN_UNUSED_VARIABLE = YES;
-				IPHONEOS_DEPLOYMENT_TARGET = 13.0;
+				IPHONEOS_DEPLOYMENT_TARGET = 16.4;
 				MTL_ENABLE_DEBUG_INFO = YES;
 				ONLY_ACTIVE_ARCH = YES;
 				SDKROOT = iphoneos;
@@ -591,7 +602,7 @@
 				GCC_WARN_UNINITIALIZED_AUTOS = YES_AGGRESSIVE;
 				GCC_WARN_UNUSED_FUNCTION = YES;
 				GCC_WARN_UNUSED_VARIABLE = YES;
-				IPHONEOS_DEPLOYMENT_TARGET = 13.0;
+				IPHONEOS_DEPLOYMENT_TARGET = 16.4;
 				MTL_ENABLE_DEBUG_INFO = NO;
 				SDKROOT = iphoneos;
 				SUPPORTED_PLATFORMS = iphoneos;
@@ -608,7 +619,9 @@
 			buildSettings = {
 				ASSETCATALOG_COMPILER_APPICON_NAME = AppIcon;
 				CLANG_ENABLE_MODULES = YES;
+				CODE_SIGN_STYLE = Automatic;
 				CURRENT_PROJECT_VERSION = "$(FLUTTER_BUILD_NUMBER)";
+				DEVELOPMENT_TEAM = X74VJ4UAST;
 				ENABLE_BITCODE = NO;
 				INFOPLIST_FILE = Runner/Info.plist;
 				LD_RUNPATH_SEARCH_PATHS = (
@@ -630,7 +643,9 @@
 			buildSettings = {
 				ASSETCATALOG_COMPILER_APPICON_NAME = AppIcon;
 				CLANG_ENABLE_MODULES = YES;
+				CODE_SIGN_STYLE = Automatic;
 				CURRENT_PROJECT_VERSION = "$(FLUTTER_BUILD_NUMBER)";
+				DEVELOPMENT_TEAM = X74VJ4UAST;
 				ENABLE_BITCODE = NO;
 				INFOPLIST_FILE = Runner/Info.plist;
 				LD_RUNPATH_SEARCH_PATHS = (
@@ -679,6 +694,20 @@
 			defaultConfigurationName = Release;
 		};
 /* End XCConfigurationList section */
+
+/* Begin XCLocalSwiftPackageReference section */
+		781AD8BC2B33823900A9FFBB /* XCLocalSwiftPackageReference "FlutterGeneratedPluginSwiftPackage" */ = {
+			isa = XCLocalSwiftPackageReference;
+			relativePath = Flutter/ephemeral/Packages/FlutterGeneratedPluginSwiftPackage;
+		};
+/* End XCLocalSwiftPackageReference section */
+
+/* Begin XCSwiftPackageProductDependency section */
+		78A3181F2AECB46A00862997 /* FlutterGeneratedPluginSwiftPackage */ = {
+			isa = XCSwiftPackageProductDependency;
+			productName = FlutterGeneratedPluginSwiftPackage;
+		};
+/* End XCSwiftPackageProductDependency section */
 	};
 	rootObject = 97C146E61CF9000F007C117D /* Project object */;
 }

ios/Runner.xcodeproj/xcshareddata/xcschemes/Runner.xcscheme

@@ -5,6 +5,24 @@
    <BuildAction
       parallelizeBuildables = "YES"
       buildImplicitDependencies = "YES">
+      <PreActions>
+         <ExecutionAction
+            ActionType = "Xcode.IDEStandardExecutionActionsCore.ExecutionActionType.ShellScriptAction">
+            <ActionContent
+               title = "Run Prepare Flutter Framework Script"
+               scriptText = "/bin/sh &quot;$FLUTTER_ROOT/packages/flutter_tools/bin/xcode_backend.sh&quot; prepare&#10;">
+               <EnvironmentBuildable>
+                  <BuildableReference
+                     BuildableIdentifier = "primary"
+                     BlueprintIdentifier = "97C146ED1CF9000F007C117D"
+                     BuildableName = "Runner.app"
+                     BlueprintName = "Runner"
+                     ReferencedContainer = "container:Runner.xcodeproj">
+                  </BuildableReference>
+               </EnvironmentBuildable>
+            </ActionContent>
+         </ExecutionAction>
+      </PreActions>
       <BuildActionEntries>
          <BuildActionEntry
             buildForTesting = "YES"

ios/Runner/AppDelegate.swift

@@ -2,12 +2,15 @@ import Flutter
 import UIKit
 
 @main
-@objc class AppDelegate: FlutterAppDelegate {
+@objc class AppDelegate: FlutterAppDelegate, FlutterImplicitEngineDelegate {
   override func application(
     _ application: UIApplication,
     didFinishLaunchingWithOptions launchOptions: [UIApplication.LaunchOptionsKey: Any]?
   ) -> Bool {
-    GeneratedPluginRegistrant.register(with: self)
     return super.application(application, didFinishLaunchingWithOptions: launchOptions)
   }
+
+  func didInitializeImplicitFlutterEngine(_ engineBridge: FlutterImplicitEngineBridge) {
+    GeneratedPluginRegistrant.register(with: engineBridge.pluginRegistry)
+  }
 }

ios/Runner/Info.plist

@@ -2,6 +2,8 @@
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
+	<key>CADisableMinimumFrameDurationOnPhone</key>
+	<true/>
 	<key>CFBundleDevelopmentRegion</key>
 	<string>$(DEVELOPMENT_LANGUAGE)</string>
 	<key>CFBundleDisplayName</key>
@@ -22,8 +24,48 @@
 	<string>????</string>
 	<key>CFBundleVersion</key>
 	<string>$(FLUTTER_BUILD_NUMBER)</string>
+	<key>LSApplicationQueriesSchemes</key>
+	<array>
+		<string>http</string>
+		<string>https</string>
+	</array>
 	<key>LSRequiresIPhoneOS</key>
 	<true/>
+	<key>NSBluetoothAlwaysUsageDescription</key>
+	<string>This app uses Bluetooth to communicate with MeshCore devices.</string>
+	<key>NSBluetoothPeripheralUsageDescription</key>
+	<string>This app uses Bluetooth to communicate with MeshCore devices.</string>
+	<key>NSCameraUsageDescription</key>
+	<string>This app uses the camera to scan QR codes for joining communities.</string>
+	<key>NSPhotoLibraryUsageDescription</key>
+	<string>This app lets you pick a photo to compress and send over the mesh.</string>
+	<key>UIApplicationSceneManifest</key>
+	<dict>
+		<key>UIApplicationSupportsMultipleScenes</key>
+		<false/>
+		<key>UISceneConfigurations</key>
+		<dict>
+			<key>UIWindowSceneSessionRoleApplication</key>
+			<array>
+				<dict>
+					<key>UISceneClassName</key>
+					<string>UIWindowScene</string>
+					<key>UISceneConfigurationName</key>
+					<string>flutter</string>
+					<key>UISceneDelegateClassName</key>
+					<string>FlutterSceneDelegate</string>
+					<key>UISceneStoryboardFile</key>
+					<string>Main</string>
+				</dict>
+			</array>
+		</dict>
+	</dict>
+	<key>UIApplicationSupportsIndirectInputEvents</key>
+	<true/>
+	<key>UIBackgroundModes</key>
+	<array>
+		<string>bluetooth-central</string>
+	</array>
 	<key>UILaunchStoryboardName</key>
 	<string>LaunchScreen</string>
 	<key>UIMainStoryboardFile</key>
@@ -41,24 +83,5 @@
 		<string>UIInterfaceOrientationLandscapeLeft</string>
 		<string>UIInterfaceOrientationLandscapeRight</string>
 	</array>
-	<key>CADisableMinimumFrameDurationOnPhone</key>
-	<true/>
-	<key>UIApplicationSupportsIndirectInputEvents</key>
-	<true/>
-	<key>UIBackgroundModes</key>
-	<array>
-		<string>bluetooth-central</string>
-	</array>
-	<key>NSBluetoothAlwaysUsageDescription</key>
-	<string>This app uses Bluetooth to communicate with MeshCore devices.</string>
-	<key>NSBluetoothPeripheralUsageDescription</key>
-	<string>This app uses Bluetooth to communicate with MeshCore devices.</string>
-	<key>NSCameraUsageDescription</key>
-	<string>This app uses the camera to scan QR codes for joining communities.</string>
-	<key>LSApplicationQueriesSchemes</key>
-	<array>
-		<string>http</string>
-		<string>https</string>
-	</array>
 </dict>
 </plist>

lib/connector/meshcore_connector_usb.dart

@@ -19,6 +19,7 @@ class MeshCoreUsbManager {
   String? get activePortKey => _activePortKey;
   String? get activePortDisplayLabel => _activePortLabel ?? _activePortKey;
   bool get isConnected => _service.isConnected;
+  Object? get lastError => _service.lastError;
   Stream<Uint8List> get frameStream => _service.frameStream;
 
   // --- Configuration ---

lib/connector/meshcore_protocol.dart

@@ -1,6 +1,7 @@
 import 'dart:convert';
 import 'dart:typed_data';
 
+import 'package:crypto/crypto.dart' as crypto;
 import 'package:flutter/widgets.dart';
 
 // Buffer Reader - sequential binary data reader with pointer tracking
@@ -202,13 +203,17 @@ const int cmdGetChannel = 31;
 const int cmdSetChannel = 32;
 const int cmdSendTracePath = 36;
 const int cmdSetOtherParams = 38;
-const int cmdSendAnonReq = 57;
 const int cmdSendTelemetryReq = 39;
 const int cmdGetCustomVar = 40;
 const int cmdSetCustomVar = 41;
 const int cmdSendBinaryReq = 50;
+const int cmdSetFloodScope = 54;
+const int cmdSendControlData = 55;
+const int cmdGetStats = 56;
+const int cmdSendAnonReq = 57;
 const int cmdSetAutoAddConfig = 58;
 const int cmdGetAutoAddConfig = 59;
+const int cmdSetPathHashMode = 61;
 
 // Text message types
 const int txtTypePlain = 0;
@@ -222,6 +227,18 @@ const int reqTypeGetTelemetry = 0x03;
 const int reqTypeGetAccessList = 0x05;
 const int reqTypeGetNeighbors = 0x06;
 
+Uint8List buildTelemetryBinaryPayload() {
+  // Room servers/repeaters read byte 1 as an inverse telemetry permission mask.
+  // Zero means "request every telemetry field allowed for this contact".
+  return Uint8List.fromList([reqTypeGetTelemetry, 0x00, 0x00, 0x00, 0x00]);
+}
+
+const int anonReqTypeRegions = 0x01;
+
+// Control data sub-types used by MeshCore discovery packets.
+const int controlSubtypeDiscoverReq = 0x08;
+const int controlSubtypeDiscoverResp = 0x09;
+
 // Repeater response codes
 const int respServerLoginOk = 0;
 
@@ -245,6 +262,11 @@ const int respCodeChannelMsgRecvV3 = 17;
 const int respCodeChannelInfo = 18;
 const int respCodeCustomVars = 21;
 const int respCodeAutoAddConfig = 25;
+const int respCodeStats = 24;
+
+const int statsTypeCore = 0;
+const int statsTypeRadio = 1;
+const int statsTypePackets = 2;
 
 // Push codes (async from device)
 const int pushCodeAdvert = 0x80;
@@ -259,6 +281,7 @@ const int pushCodeTraceData = 0x89;
 const int pushCodeNewAdvert = 0x8A;
 const int pushCodeTelemetryResponse = 0x8B;
 const int pushCodeBinaryResponse = 0x8C;
+const int pushCodeControlData = 0x8E;
 
 // Contact/advertisement types
 const int advTypeChat = 1;
@@ -313,7 +336,7 @@ const int maxPathSize = 64;
 const int pathHashSize = 1;
 const int maxNameSize = 32;
 const int maxFrameSize = 172;
-const int appProtocolVersion = 3;
+const int appProtocolVersion = 4;
 // Matches firmware MAX_TEXT_LEN (10 * CIPHER_BLOCK_SIZE).
 const int maxTextPayloadBytes = 160;
 const int _sendTextMsgOverheadBytes =
@@ -444,8 +467,13 @@ String pubKeyToHex(Uint8List pubKey) {
 
 // Helper to convert hex string to public key
 Uint8List hexToPubKey(String hex) {
+  if (hex.length != pubKeySize * 2) {
+    throw FormatException(
+      'Public key hex must be ${pubKeySize * 2} chars, got ${hex.length}',
+    );
+  }
   final result = Uint8List(pubKeySize);
-  for (int i = 0; i < pubKeySize && i * 2 + 1 < hex.length; i++) {
+  for (int i = 0; i < pubKeySize; i++) {
     result[i] = int.parse(hex.substring(i * 2, i * 2 + 2), radix: 16);
   }
   return result;
@@ -554,6 +582,17 @@ Uint8List buildGetBattAndStorageFrame() {
   return Uint8List.fromList([cmdGetBattAndStorage]);
 }
 
+/// Companion radio stats: [56][statsType] where statsType is statsTypeCore/Radio/Packets.
+Uint8List buildGetStatsFrame(int statsType) {
+  return Uint8List.fromList([cmdGetStats, statsType & 0xFF]);
+}
+
+/// Path hash width on air: [61][0][mode], mode 0..3 → (mode+1) bytes per hop hash.
+Uint8List buildSetPathHashModeFrame(int mode) {
+  final m = mode.clamp(0, 3).toInt();
+  return Uint8List.fromList([cmdSetPathHashMode, 0, m]);
+}
+
 // Build CMD_SET_DEVICE_TIME frame
 Uint8List buildSetDeviceTimeFrame(int timestamp) {
   final writer = BufferWriter();
@@ -702,26 +741,20 @@ Uint8List buildUpdateContactPathFrame(
   final timestamp = DateTime.now().millisecondsSinceEpoch ~/ 1000;
   writer.writeUInt32LE(timestamp);
 
-  if ((lat == null || lon == null) && lastModified != null) {
-    // If lat/lon not provided, write zeros
-    writer.writeInt32LE(0);
-    writer.writeInt32LE(0);
-  } else {
-    // Latitude and Longitude are expected in degrees, convert to int by multiplying by 1e6
-    // Latitude
-    final latitude = lat ?? 0.0;
-    writer.writeInt32LE((latitude * 1e6).round());
-
-    // Longitude
-    final longitude = lon ?? 0.0;
-    writer.writeInt32LE((longitude * 1e6).round());
-  }
-
+  // Optional [Lat x4, Lon x4][timestamp x4] tail per the doc comment above.
+  // Emit 8 bytes of position (zero-filled when only lastModified is provided)
+  // followed by an optional 4-byte timestamp. Earlier code emitted the
+  // position block twice, which corrupted the tail and caused the firmware
+  // to parse the second lat as the timestamp. See #427.
+  final hasLocation = lat != null && lon != null;
+  if (hasLocation || lastModified != null) {
+    writer.writeInt32LE(hasLocation ? (lat * 1e6).round() : 0);
+    writer.writeInt32LE(hasLocation ? (lon * 1e6).round() : 0);
     if (lastModified != null) {
-    // Last modified
       final lastModifiedTimestamp = lastModified.millisecondsSinceEpoch ~/ 1000;
       writer.writeUInt32LE(lastModifiedTimestamp);
     }
+  }
 
   return writer.toBytes();
 }
@@ -843,6 +876,67 @@ Uint8List buildSendBinaryReq(Uint8List repeaterPubKey, {Uint8List? payload}) {
   return writer.toBytes();
 }
 
+Uint8List buildSendControlDataFrame(Uint8List payload) {
+  final writer = BufferWriter();
+  writer.writeByte(cmdSendControlData);
+  writer.writeBytes(payload);
+  return writer.toBytes();
+}
+
+Uint8List buildDiscoveryRequestPayload(
+  int tag, {
+  bool prefixOnly = false,
+  int typeMask = 1 << advTypeRepeater,
+}) {
+  final writer = BufferWriter();
+  // The high bit must be set for CMD_SEND_CONTROL_DATA; DISCOVER_REQ uses
+  // subtype 0x8, with the low bit selecting short/full public keys in replies.
+  writer.writeByte(
+    (controlSubtypeDiscoverReq << 4) | (prefixOnly ? 0x01 : 0x00),
+  );
+  writer.writeByte(typeMask);
+  writer.writeUInt32LE(tag);
+  writer.writeUInt32LE(0); // since=0 asks nearby nodes for any recent advert.
+  return writer.toBytes();
+}
+
+Uint8List _reversePathByHop(Uint8List path, int pathHashWidth) {
+  if (path.isEmpty) return Uint8List(0);
+  final width = pathHashWidth.clamp(1, 4).toInt();
+  if (path.length % width != 0) {
+    return Uint8List.fromList(path.reversed.toList());
+  }
+
+  final reversed = Uint8List(path.length);
+  final hops = path.length ~/ width;
+  for (var i = 0; i < hops; i++) {
+    final from = (hops - 1 - i) * width;
+    reversed.setRange(i * width, (i + 1) * width, path, from);
+  }
+  return reversed;
+}
+
+// Build CMD_SEND_ANON_REQ frame.
+// Payload format for regions: [anon_req_type][reply_path_len][reply_path...].
+Uint8List buildSendAnonReqFrame(
+  Uint8List repeaterPubKey, {
+  required int requestType,
+  Uint8List? replyPath,
+  int replyHopCount = 0,
+  int pathHashWidth = pathHashSize,
+}) {
+  final width = pathHashWidth.clamp(1, 4).toInt();
+  final path = replyPath ?? Uint8List(0);
+  final encodedPathLen = ((width - 1) << 6) | (replyHopCount & 0x3F);
+  final writer = BufferWriter();
+  writer.writeByte(cmdSendAnonReq);
+  writer.writeBytes(repeaterPubKey);
+  writer.writeByte(requestType);
+  writer.writeByte(encodedPathLen);
+  writer.writeBytes(_reversePathByHop(path, width));
+  return writer.toBytes();
+}
+
 //Build a trace request frame
 //[cmd][tag x4][auth x4][flag][payload]
 Uint8List buildTraceReq(int tag, int auth, int flag, {Uint8List? payload}) {
@@ -933,7 +1027,22 @@ Uint8List buildSendTelemetryReq(Uint8List? pubKey) {
     writer.writeBytes(Uint8List(3)); // reserved bytes
     writer.writeBytes(pubKey);
   } else {
-    writer.writeBytes(Uint8List(4)); // reserved bytes
+    writer.writeBytes(Uint8List(3)); // reserved bytes
   }
   return writer.toBytes();
 }
+
+//Build CMD_SET_FLOOD_SCOPE
+// Format: [cmd][scope]
+Uint8List buildSetFloodScopeFrame(String region) {
+  if (region == '') {
+    // reset scope
+    return Uint8List.fromList([cmdSetFloodScope, 0]);
+  }
+
+  final name = region.startsWith('#') ? region : '#$region';
+  final hash = crypto.sha256.convert(utf8.encode(name)).bytes;
+  final scope = Uint8List.fromList(hash.sublist(0, 16));
+
+  return Uint8List.fromList([cmdSetFloodScope, 0, ...scope]);
+}

lib/connector/meshcore_uuids.dart

@@ -0,0 +1,20 @@
+class MeshCoreUuids {
+  static const String service = "6e400001-b5a3-f393-e0a9-e50e24dcca9e";
+  static const String rxCharacteristic = "6e400002-b5a3-f393-e0a9-e50e24dcca9e";
+  static const String txCharacteristic = "6e400003-b5a3-f393-e0a9-e50e24dcca9e";
+
+  /// Known advertised-name prefixes used by stock MeshCore firmware builds.
+  /// Discovery no longer filters on these (it filters on the [service] UUID so
+  /// that community forks with custom names are still found); kept for
+  /// reference and possible future display heuristics.
+  static const List<String> deviceNamePrefixes = [
+    "MeshCore-",
+    "Whisper-",
+    "WisCore-",
+    "Seeed",
+    "Lilygo",
+    "HT-",
+    "LowMesh_MC_",
+    "NRF52",
+  ];
+}

lib/helpers/cayenne_lpp.dart

@@ -96,6 +96,34 @@ class CayenneLpp {
         }
 
         switch (type) {
+          case lppDigitalInput:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt8(),
+            });
+            break;
+          case lppDigitalOutput:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt8(),
+            });
+            break;
+          case lppAnalogInput:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readInt16BE() / 100,
+            });
+            break;
+          case lppAnalogOutput:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readInt16BE() / 100,
+            });
+            break;
           case lppGenericSensor:
             telemetry.add({
               'channel': channel,
@@ -131,6 +159,17 @@ class CayenneLpp {
               'value': buffer.readUInt8() / 2,
             });
             break;
+          case lppAccelerometer:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': {
+                'x': buffer.readInt16BE() / 1000,
+                'y': buffer.readInt16BE() / 1000,
+                'z': buffer.readInt16BE() / 1000,
+              },
+            });
+            break;
           case lppBarometricPressure:
             telemetry.add({
               'channel': channel,
@@ -138,6 +177,13 @@ class CayenneLpp {
               'value': buffer.readUInt16BE() / 10,
             });
             break;
+          case lppAltitude:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readInt16BE(),
+            });
+            break;
           case lppVoltage:
             telemetry.add({
               'channel': channel,
@@ -152,6 +198,13 @@ class CayenneLpp {
               'value': buffer.readInt16BE() / 1000,
             });
             break;
+          case lppFrequency:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt32BE(),
+            });
+            break;
           case lppPercentage:
             telemetry.add({
               'channel': channel,
@@ -173,6 +226,56 @@ class CayenneLpp {
               'value': buffer.readUInt16BE(),
             });
             break;
+          case lppDistance:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt32BE() / 1000,
+            });
+            break;
+          case lppEnergy:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt32BE() / 1000,
+            });
+            break;
+          case lppDirection:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt16BE(),
+            });
+            break;
+          case lppUnixTime:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt32BE(),
+            });
+            break;
+          case lppGyrometer:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': {
+                'x': buffer.readInt16BE() / 100,
+                'y': buffer.readInt16BE() / 100,
+                'z': buffer.readInt16BE() / 100,
+              },
+            });
+            break;
+          case lppColour:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': {
+                'red': buffer.readUInt8(),
+                'green': buffer.readUInt8(),
+                'blue': buffer.readUInt8(),
+              },
+            });
+            break;
           case lppGps:
             telemetry.add({
               'channel': channel,
@@ -184,6 +287,24 @@ class CayenneLpp {
               },
             });
             break;
+          case lppSwitch:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt8(),
+            });
+            break;
+          case lppPolyline:
+            final size = buffer.readUInt8();
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': {
+                'size': size,
+                'data': _bytesToHex(_readPolylinePayload(buffer, size)),
+              },
+            });
+            break;
           default:
             return telemetry;
         }
@@ -216,6 +337,19 @@ class CayenneLpp {
         );
 
         switch (type) {
+          case lppDigitalInput:
+            channelData['values']['digitalInput'] = buffer.readUInt8();
+            break;
+          case lppDigitalOutput:
+            channelData['values']['digitalOutput'] = buffer.readUInt8();
+            break;
+          case lppAnalogInput:
+            channelData['values']['analogInput'] = buffer.readInt16BE() / 100.0;
+            break;
+          case lppAnalogOutput:
+            channelData['values']['analogOutput'] =
+                buffer.readInt16BE() / 100.0;
+            break;
           case lppGenericSensor:
             channelData['values']['generic'] = buffer.readUInt32BE();
             break;
@@ -231,15 +365,29 @@ class CayenneLpp {
           case lppRelativeHumidity:
             channelData['values']['humidity'] = buffer.readUInt8() / 2.0;
             break;
+          case lppAccelerometer:
+            channelData['values']['accelerometer'] = {
+              'x': buffer.readInt16BE() / 1000.0,
+              'y': buffer.readInt16BE() / 1000.0,
+              'z': buffer.readInt16BE() / 1000.0,
+            };
+            break;
           case lppBarometricPressure:
             channelData['values']['pressure'] = buffer.readUInt16BE() / 10.0;
             break;
+          case lppAltitude:
+            // MeshCore encodes standalone barometric altitude as LPP type 121.
+            channelData['values']['altitude'] = buffer.readInt16BE();
+            break;
           case lppVoltage:
             channelData['values']['voltage'] = buffer.readInt16BE() / 100.0;
             break;
           case lppCurrent:
             channelData['values']['current'] = buffer.readInt16BE() / 1000.0;
             break;
+          case lppFrequency:
+            channelData['values']['frequency'] = buffer.readUInt32BE();
+            break;
           case lppPercentage:
             channelData['values']['percentage'] = buffer.readUInt8();
             break;
@@ -249,6 +397,32 @@ class CayenneLpp {
           case lppPower:
             channelData['values']['power'] = buffer.readUInt16BE();
             break;
+          case lppDistance:
+            channelData['values']['distance'] = buffer.readUInt32BE() / 1000.0;
+            break;
+          case lppEnergy:
+            channelData['values']['energy'] = buffer.readUInt32BE() / 1000.0;
+            break;
+          case lppDirection:
+            channelData['values']['direction'] = buffer.readUInt16BE();
+            break;
+          case lppUnixTime:
+            channelData['values']['time'] = buffer.readUInt32BE();
+            break;
+          case lppGyrometer:
+            channelData['values']['gyrometer'] = {
+              'x': buffer.readInt16BE() / 100.0,
+              'y': buffer.readInt16BE() / 100.0,
+              'z': buffer.readInt16BE() / 100.0,
+            };
+            break;
+          case lppColour:
+            channelData['values']['colour'] = {
+              'red': buffer.readUInt8(),
+              'green': buffer.readUInt8(),
+              'blue': buffer.readUInt8(),
+            };
+            break;
           case lppGps:
             channelData['values']['gps'] = {
               'latitude': buffer.readInt24BE() / 10000.0,
@@ -256,22 +430,48 @@ class CayenneLpp {
               'altitude': buffer.readInt24BE() / 100.0,
             };
             break;
-          // Add more types as needed...
+          case lppSwitch:
+            channelData['values']['switch'] = buffer.readUInt8() != 0;
+            break;
+          case lppPolyline:
+            final size = buffer.readUInt8();
+            channelData['values']['polyline'] = {
+              'size': size,
+              'data': _bytesToHex(_readPolylinePayload(buffer, size)),
+            };
+            break;
           default:
-            //Stopped parsing to avoid misalignment
-            return channels.values.toList();
+            // Stop parsing to avoid losing alignment on an unknown LPP type.
+            return _sortedChannelValues(channels);
         }
       }
 
-      final List<Map<String, dynamic>> channelsOut = channels.values.toList();
-      channelsOut.sort((a, b) => a['channel'].compareTo(b['channel']));
-      return channelsOut;
+      return _sortedChannelValues(channels);
     } catch (e) {
       // Handle parsing errors, possibly due to malformed data
       appLogger.error('Error parsing Cayenne LPP data: $e');
-      return <
-        Map<String, dynamic>
-      >[]; // Return an empty list on error to avoid crashing the app
+      // Preserve any fields parsed before the malformed value.
+      return _sortedChannelValues(channels);
     }
   }
+
+  static Uint8List _readPolylinePayload(BufferReader buffer, int size) {
+    final declaredPayloadSize = size > 0 ? size - 1 : 0;
+    final availablePayloadSize = declaredPayloadSize <= buffer.remaining
+        ? declaredPayloadSize
+        : buffer.remaining;
+    return buffer.readBytes(availablePayloadSize);
+  }
+
+  static List<Map<String, dynamic>> _sortedChannelValues(
+    Map<int, Map<String, dynamic>> channels,
+  ) {
+    final channelsOut = channels.values.toList();
+    channelsOut.sort((a, b) => a['channel'].compareTo(b['channel']));
+    return channelsOut;
+  }
+
+  static String _bytesToHex(Uint8List bytes) {
+    return bytes.map((b) => b.toRadixString(16).padLeft(2, '0')).join();
+  }
 }

lib/helpers/chat_scroll_controller.dart

@@ -49,6 +49,25 @@ class ChatScrollController extends ScrollController {
     }
   }
 
+  /// Jumps toward an off-screen message so that lazy ListView.builder builds
+  /// items near it. Only visible + cacheExtent items have real heights, so we
+  /// use proportion of maxScrollExtent (itself an estimate from built items'
+  /// avg height). Call [onJumped] on the next frame to ensureVisible/scroll
+  /// to the exact target.
+  void jumpToEstimatedOffset({
+    required int unreadCount,
+    required int totalMessages,
+    required VoidCallback onJumped,
+  }) {
+    if (!hasClients || totalMessages == 0) return;
+    final maxExtent = position.maxScrollExtent;
+    final jumpOffset = maxExtent * (unreadCount / totalMessages);
+    if (jumpOffset > 100) {
+      jumpTo(jumpOffset);
+    }
+    WidgetsBinding.instance.addPostFrameCallback((_) => onJumped());
+  }
+
   void scrollToBottomIfAtBottom() {
     // Only scroll if jump button is NOT showing (i.e., already at bottom)
     if (!showJumpToBottom.value && hasClients && position.maxScrollExtent > 0) {

lib/helpers/contact_ui.dart

@@ -0,0 +1,59 @@
+import 'package:flutter/material.dart';
+
+import '../connector/meshcore_protocol.dart';
+import '../utils/emoji_utils.dart';
+
+IconData contactTypeIcon(int type) {
+  switch (type) {
+    case advTypeChat:
+      return Icons.chat;
+    case advTypeRepeater:
+      return Icons.cell_tower;
+    case advTypeRoom:
+      return Icons.group;
+    case advTypeSensor:
+      return Icons.sensors;
+    default:
+      return Icons.device_unknown;
+  }
+}
+
+Color contactTypeColor(int type) {
+  switch (type) {
+    case advTypeChat:
+      return Colors.blue;
+    case advTypeRepeater:
+      return Colors.orange;
+    case advTypeRoom:
+      return Colors.purple;
+    case advTypeSensor:
+      return Colors.green;
+    default:
+      return Colors.grey;
+  }
+}
+
+Color colorForName(String name) {
+  const colors = [
+    Colors.blue,
+    Colors.green,
+    Colors.orange,
+    Colors.purple,
+    Colors.pink,
+    Colors.teal,
+    Colors.indigo,
+    Colors.cyan,
+    Colors.amber,
+    Colors.deepOrange,
+  ];
+  return colors[name.hashCode.abs() % colors.length];
+}
+
+String firstCharacterOrEmoji(String name) {
+  if (name.isEmpty) return '?';
+  final emoji = firstEmoji(name);
+  if (emoji != null) return emoji;
+  final runes = name.runes.toList();
+  if (runes.isEmpty) return '?';
+  return String.fromCharCode(runes[0]).toUpperCase();
+}

lib/helpers/cyr2lat.dart

@@ -0,0 +1,63 @@
+class Cyr2Lat {
+  static Map<String, String> _charMap = {
+    'А': 'A',
+    'В': 'B',
+    'Е': 'E',
+    'Ё': 'E',
+    'З': '3',
+    'К': 'K',
+    'М': 'M',
+    'Н': 'H',
+    'О': 'O',
+    'Р': 'P',
+    'С': 'C',
+    'Т': 'T',
+    'Х': 'X',
+    'Ь': 'b',
+    'а': 'a',
+    'е': 'e',
+    'ё': 'e',
+    'о': 'o',
+    'р': 'p',
+    'с': 'c',
+    'у': 'y',
+    'х': 'x',
+  };
+
+  static final RegExp _prefixRegExp = RegExp(r'\@\[[\S\s]+\] ');
+
+  static void setCharMap(Map<String, String> charMap) {
+    _charMap = Map.from(charMap);
+  }
+
+  static String encode(String text) {
+    if (text.isEmpty) return text;
+    final buffer = StringBuffer();
+
+    final senderName = extractSenderName(text);
+    final msgText = removeSenderName(text);
+
+    for (final rune in msgText.runes) {
+      final char = String.fromCharCode(rune);
+      buffer.write(_charMap[char] ?? char);
+    }
+
+    return senderName + buffer.toString();
+  }
+
+  static String removeSenderName(String text) {
+    final match = _prefixRegExp.matchAsPrefix(text);
+    if (match != null) {
+      return text.substring(match.end);
+    }
+    return text;
+  }
+
+  static String extractSenderName(String text) {
+    final match = _prefixRegExp.matchAsPrefix(text);
+    if (match != null) {
+      return match.group(0) ?? '';
+    }
+    return '';
+  }
+}

lib/helpers/gif_helper.dart

@@ -0,0 +1,38 @@
+class GifHelper {
+  /// Parse a known GIF format, which can be any of:
+  /// g:GIFID
+  /// https://media.giphy.com/media/GIFID/giphy.gif
+  /// https://giphy.com/gifs/Optional-title-with-dashes-GIFID
+  ///
+  /// GIFID is a Giphy GIF ID. The https:// is optional (and
+  /// can also be http://). The giphy.com/gifs form can also
+  /// include a trailing slash.
+  ///
+  /// Returns null if text is not a valid GIF format
+  static String? parseGif(String text) {
+    final trimmed = text.trim();
+    final match = RegExp(r'^g:([A-Za-z0-9_-]+)$').firstMatch(trimmed);
+    if (match != null) {
+      return match.group(1);
+    }
+    final directUrlMatch = RegExp(
+      r'^(?:https?:\/\/)?media\.giphy\.com\/media\/([A-Za-z0-9_-]+)\/giphy\.gif$',
+    ).firstMatch(trimmed);
+    if (directUrlMatch != null) {
+      return directUrlMatch.group(1);
+    }
+    // Giphy understands page URLs with just the ID, or any string and a
+    // dash before the ID, and redirects to a page with a dash-separated
+    // title, a dash, and the ID. IDs in this form *probably* can't
+    // contain dashes.
+    final pageMatch = RegExp(
+      r'^(?:https?:\/\/)?giphy\.com\/gifs\/(?:[^/?]*-)?([A-Za-z0-9_]+)\/?$',
+    ).firstMatch(trimmed);
+    return pageMatch?.group(1);
+  }
+
+  /// Encode a GIF in a format that parseGif() can parse.
+  static String encodeGif(String gifId) {
+    return 'g:$gifId';
+  }
+}

lib/helpers/image_send_flow.dart

@@ -0,0 +1,78 @@
+import 'dart:io';
+
+import 'package:flutter/foundation.dart';
+import 'package:flutter/material.dart';
+import 'package:image_picker/image_picker.dart';
+
+import '../l10n/l10n.dart';
+import '../widgets/image_send_codec_binding.dart';
+import '../widgets/image_send_preview_sheet.dart';
+
+/// Shared "attach an image" flow, used by both the direct-message and channel
+/// chat screens so the two surfaces cannot drift apart.
+///
+/// Picks a photo, then shows [ImageSendPreviewSheet] so the user sees the
+/// packet count and airtime *before* committing to a send that may occupy the
+/// channel for seconds. Returns null if the user backed out at either step.
+///
+/// The caller owns the actual transmission: this only produces the payload.
+Future<ImageSendPreviewResult?> pickAndPreviewImage({
+  required BuildContext context,
+  required ImageSendCodec codec,
+  ImagePicker? picker,
+}) async {
+  final XFile? picked;
+  try {
+    picked = await (picker ?? ImagePicker()).pickImage(
+      source: ImageSource.gallery,
+      // The codec centre-crops to 512x512 anyway, so there is nothing to gain
+      // from decoding a 12 MP original -- but stay well above 512 so the crop
+      // still has detail to work with.
+      maxWidth: 2048,
+      maxHeight: 2048,
+    );
+  } on Exception catch (e) {
+    debugPrint('image pick failed: $e');
+    if (context.mounted) {
+      ScaffoldMessenger.of(context).showSnackBar(
+        SnackBar(content: Text(context.l10n.chat_imagePickFailed)),
+      );
+    }
+    return null;
+  }
+
+  if (picked == null) return null; // user cancelled the picker
+
+  final Uint8List bytes;
+  int originalBytes;
+  try {
+    bytes = await picked.readAsBytes();
+    originalBytes = bytes.length;
+    if (!kIsWeb) {
+      // length() is the on-disk size, which is what we want to show against the
+      // transmitted size; fall back to the in-memory length if it fails.
+      try {
+        originalBytes = await File(picked.path).length();
+      } on FileSystemException {
+        // keep the in-memory length
+      }
+    }
+  } on Exception catch (e) {
+    debugPrint('image read failed: $e');
+    if (context.mounted) {
+      ScaffoldMessenger.of(context).showSnackBar(
+        SnackBar(content: Text(context.l10n.chat_imagePickFailed)),
+      );
+    }
+    return null;
+  }
+
+  if (!context.mounted) return null;
+
+  return showImageSendPreviewSheet(
+    context: context,
+    imageBytes: bytes,
+    originalFileBytes: originalBytes,
+    codec: codec,
+  );
+}

lib/helpers/link_handler.dart

@@ -1,29 +1,35 @@
+import 'package:flutter/gestures.dart';
 import 'package:flutter/material.dart';
 import 'package:flutter_linkify/flutter_linkify.dart';
 import 'package:url_launcher/url_launcher.dart';
 import '../l10n/l10n.dart';
 import '../utils/platform_info.dart';
+import '../helpers/snack_bar_builder.dart';
 
 class LinkHandler {
+  static TextStyle defaultLinkStyle(BuildContext context, TextStyle base) {
+    final brightness = Theme.of(context).brightness;
+    final orange = brightness == Brightness.dark
+        ? const Color(0xFFFFB74D)
+        : const Color(0xFFE65100);
+    return base.copyWith(color: orange, decoration: TextDecoration.underline);
+  }
+
   /// Returns a [SelectableLinkify] on desktop or a [Linkify] on mobile.
   static Widget buildLinkifyText({
     required BuildContext context,
     required String text,
     required TextStyle style,
     TextStyle? linkStyle,
+    VoidCallback? onSecondaryTap,
   }) {
-    final effectiveLinkStyle =
-        linkStyle ??
-        style.copyWith(
-          color: Colors.green,
-          decoration: TextDecoration.underline,
-        );
+    final effectiveLinkStyle = linkStyle ?? defaultLinkStyle(context, style);
     const options = LinkifyOptions(humanize: false, defaultToHttps: false);
-    const linkifiers = [UrlLinkifier()];
+    const linkifiers = [UrlLinkifier(), EmailLinkifier()];
     void onOpen(LinkableElement link) => handleLinkTap(context, link.url);
 
     if (PlatformInfo.isDesktop) {
-      return SelectableLinkify(
+      final linkify = SelectableLinkify(
         text: text,
         style: style,
         linkStyle: effectiveLinkStyle,
@@ -31,6 +37,14 @@ class LinkHandler {
         linkifiers: linkifiers,
         onOpen: onOpen,
       );
+      if (onSecondaryTap == null) return linkify;
+      return Listener(
+        onPointerDown: (event) {
+          if (event.buttons & kSecondaryMouseButton != 0) onSecondaryTap();
+        },
+        behavior: HitTestBehavior.translucent,
+        child: linkify,
+      );
     }
     return Linkify(
       text: text,
@@ -90,21 +104,19 @@ class LinkHandler {
       final uri = Uri.parse(url);
       if (!await launchUrl(uri, mode: LaunchMode.externalApplication)) {
         if (context.mounted) {
-          ScaffoldMessenger.of(context).showSnackBar(
-            SnackBar(
+          showDismissibleSnackBar(
+            context,
             content: Text(context.l10n.chat_couldNotOpenLink(url)),
             backgroundColor: Colors.red,
-            ),
           );
         }
       }
     } catch (e) {
       if (context.mounted) {
-        ScaffoldMessenger.of(context).showSnackBar(
-          SnackBar(
+        showDismissibleSnackBar(
+          context,
           content: Text(context.l10n.chat_invalidLink),
           backgroundColor: Colors.red,
-          ),
         );
       }
     }

lib/helpers/path_helper.dart

@@ -1,5 +1,7 @@
-import '../models/contact.dart';
+import 'package:flutter/foundation.dart';
+
 import '../connector/meshcore_protocol.dart';
+import '../models/contact.dart';
 
 class PathHelper {
   static String formatPathHex(List<int> pathBytes) {
@@ -8,24 +10,82 @@ class PathHelper {
         .join(',');
   }
 
-  static String resolvePathNames(
-    List<int> pathBytes,
-    List<Contact> allContacts,
-  ) {
-    return pathBytes
-        .map((b) {
-          final hex = b.toRadixString(16).padLeft(2, '0').toUpperCase();
+  static String hopHex(int byte) {
+    return byte.toRadixString(16).padLeft(2, '0').toUpperCase();
+  }
+
+  static String formatHopHex(List<int> hopBytes) {
+    return hopBytes
+        .map((b) => b.toRadixString(16).padLeft(2, '0').toUpperCase())
+        .join();
+  }
+
+  static String? hopName(int byte, List<Contact> allContacts) {
     final matches = allContacts
         .where(
           (c) =>
-                    c.publicKey.first == b &&
+              c.publicKey.isNotEmpty &&
+              c.publicKey.first == byte &&
               (c.type == advTypeRepeater || c.type == advTypeRoom),
         )
         .toList();
-          if (matches.isEmpty) return hex;
+    if (matches.isEmpty) return null;
     if (matches.length == 1) return matches.first.name;
     return matches.map((c) => c.name).join(' | ');
-        })
-        .join(' \u2192 ');
+  }
+
+  static List<Uint8List> splitPathBytes(
+    List<int> pathBytes,
+    int hashByteWidth,
+  ) {
+    if (pathBytes.isEmpty) return const [];
+
+    final width = hashByteWidth.clamp(1, 4).toInt();
+    final hops = <Uint8List>[];
+    for (int i = 0; i < pathBytes.length; i += width) {
+      final endIdx = (i + width).clamp(0, pathBytes.length).toInt();
+      final hopBytes = pathBytes.sublist(i, endIdx);
+      if (hopBytes.isNotEmpty) {
+        hops.add(Uint8List.fromList(hopBytes));
+      }
+    }
+    return hops;
+  }
+
+  /// Resolves path bytes to contact names, supporting multi-byte hash widths.
+  ///
+  /// Groups path bytes according to [hashByteWidth]:
+  /// - 1: Single byte per hop (256 unique nodes)
+  /// - 2: Two bytes per hop (65K unique nodes)
+  /// - 3: Three bytes per hop (16M unique nodes)
+  /// - 4: Four bytes per hop (4.3G unique nodes)
+  static String resolvePathNames(
+    List<int> pathBytes,
+    List<Contact> allContacts,
+    int hashByteWidth,
+  ) {
+    if (pathBytes.isEmpty) return '';
+
+    final parts = <String>[];
+
+    for (final hopBytes in splitPathBytes(pathBytes, hashByteWidth)) {
+      final hex = formatHopHex(hopBytes);
+
+      final matches = allContacts.where((c) {
+        if (c.publicKey.length < hopBytes.length) return false;
+        if (c.type != advTypeRepeater && c.type != advTypeRoom) return false;
+        return listEquals(c.publicKey.sublist(0, hopBytes.length), hopBytes);
+      }).toList();
+
+      if (matches.isEmpty) {
+        parts.add(hex);
+      } else if (matches.length == 1) {
+        parts.add(matches.first.name);
+      } else {
+        parts.add(matches.map((c) => c.name).join(' | '));
+      }
+    }
+
+    return parts.join(' \u2192 ');
   }
 }

lib/helpers/path_hop_resolver.dart

@@ -0,0 +1,76 @@
+import 'package:latlong2/latlong.dart';
+
+import '../connector/meshcore_protocol.dart';
+import 'path_helper.dart';
+import '../models/contact.dart';
+
+class PathHopResolver {
+  const PathHopResolver._();
+
+  static List<Contact?> resolve({
+    required List<int> pathBytes,
+    required List<Contact> contacts,
+    LatLng? endpoint,
+    bool resolveFromEnd = false,
+    int pathHashByteWidth = 1,
+  }) {
+    final width = pathHashByteWidth.clamp(1, 4).toInt();
+    final candidatesByPrefix = <String, List<Contact>>{};
+    for (final contact in contacts) {
+      if (contact.publicKey.length < width) continue;
+      if (contact.type != advTypeRepeater && contact.type != advTypeRoom) {
+        continue;
+      }
+      final prefix = PathHelper.formatHopHex(
+        contact.publicKey.sublist(0, width),
+      );
+      candidatesByPrefix.putIfAbsent(prefix, () => <Contact>[]).add(contact);
+    }
+    for (final candidates in candidatesByPrefix.values) {
+      candidates.sort((a, b) => b.lastSeen.compareTo(a.lastSeen));
+    }
+
+    final hops = PathHelper.splitPathBytes(pathBytes, width);
+    final resolved = List<Contact?>.filled(hops.length, null);
+    final indexes = resolveFromEnd
+        ? List<int>.generate(hops.length, (i) => hops.length - 1 - i)
+        : List<int>.generate(hops.length, (i) => i);
+    final distance = Distance();
+    var previousPosition = endpoint;
+
+    for (final index in indexes) {
+      final candidates =
+          candidatesByPrefix[PathHelper.formatHopHex(hops[index])];
+      if (candidates == null || candidates.isEmpty) continue;
+
+      var bestIndex = 0;
+      if (previousPosition != null && candidates.length > 1) {
+        double? nearestDistance;
+        for (var i = 0; i < candidates.length; i++) {
+          final position = _positionOf(candidates[i]);
+          if (position == null) continue;
+          final candidateDistance = distance(previousPosition, position);
+          if (nearestDistance == null || candidateDistance < nearestDistance) {
+            nearestDistance = candidateDistance;
+            bestIndex = i;
+          }
+        }
+      }
+
+      final contact = candidates.removeAt(bestIndex);
+      resolved[index] = contact;
+      previousPosition = _positionOf(contact) ?? previousPosition;
+    }
+
+    return resolved;
+  }
+
+  static LatLng? _positionOf(Contact contact) {
+    if (!contact.hasLocation ||
+        contact.latitude == null ||
+        contact.longitude == null) {
+      return null;
+    }
+    return LatLng(contact.latitude!, contact.longitude!);
+  }
+}

lib/helpers/reaction_helper.dart

@@ -109,4 +109,9 @@ class ReactionHelper {
 
     return ReactionInfo(targetHash: match.group(1)!, emoji: emoji);
   }
+
+  /// Encode a reaction message that parseReaction() can parse.
+  static String encodeReaction(String hash, String emojiIndex) {
+    return 'r:$hash:$emojiIndex';
+  }
 }

lib/helpers/snack_bar_builder.dart

@@ -0,0 +1,68 @@
+import 'package:flutter/material.dart';
+
+// showDismissibleSnackBar shows  a [SnackBar] with tap to dismiss
+// all other properties are default and optional
+void showDismissibleSnackBar(
+  BuildContext context, {
+  Key? key,
+  required Widget content,
+  Color? backgroundColor,
+  double? elevation,
+  EdgeInsetsGeometry? margin,
+  EdgeInsetsGeometry? padding,
+  double? width,
+  ShapeBorder? shape,
+  HitTestBehavior? hitTestBehavior,
+  SnackBarBehavior? behavior,
+  SnackBarAction? action,
+  double? actionOverflowThreshold,
+  bool? showCloseIcon,
+  Color? closeIconColor,
+  Duration? duration,
+  bool? persist,
+  Animation<double>? animation,
+  void Function()? onVisible,
+  DismissDirection? dismissDirection,
+  Clip? clipBehavior,
+}) {
+  // Callers often reach here after an async gap; the context may already be
+  // unmounted, or deactivated (popped but not yet disposed) — ancestor
+  // lookups on a deactivated element throw. Showing nothing is the right
+  // outcome in both cases.
+  if (!context.mounted) return;
+  var isActive = true;
+  assert(() {
+    isActive = (context as Element).debugIsActive;
+    return true;
+  }());
+  if (!isActive) return;
+  final messenger = ScaffoldMessenger.maybeOf(context);
+  if (messenger == null) return;
+  messenger.showSnackBar(
+    SnackBar(
+      key: key,
+      content: GestureDetector(
+        onTap: () => messenger.hideCurrentSnackBar(),
+        child: content,
+      ),
+      backgroundColor: backgroundColor,
+      elevation: elevation,
+      margin: margin,
+      padding: padding,
+      width: width,
+      shape: shape,
+      hitTestBehavior: hitTestBehavior,
+      behavior: behavior,
+      action: action,
+      actionOverflowThreshold: actionOverflowThreshold,
+      showCloseIcon: showCloseIcon,
+      closeIconColor: closeIconColor,
+      duration: duration ?? const Duration(seconds: 4),
+      persist: persist,
+      animation: animation,
+      onVisible: onVisible,
+      dismissDirection: dismissDirection ?? DismissDirection.down,
+      clipBehavior: clipBehavior ?? Clip.hardEdge,
+    ),
+  );
+}

lib/helpers/utf8_length_limiter.dart

@@ -4,8 +4,14 @@ import 'package:flutter/services.dart';
 
 class Utf8LengthLimitingTextInputFormatter extends TextInputFormatter {
   final int maxBytes;
+  final String Function(String)? encoder;
 
-  const Utf8LengthLimitingTextInputFormatter(this.maxBytes);
+  const Utf8LengthLimitingTextInputFormatter(this.maxBytes, {this.encoder});
+
+  int _effectiveByteLength(String text) {
+    final effective = encoder != null ? encoder!(text) : text;
+    return utf8.encode(effective).length;
+  }
 
   @override
   TextEditingValue formatEditUpdate(
@@ -13,8 +19,7 @@ class Utf8LengthLimitingTextInputFormatter extends TextInputFormatter {
     TextEditingValue newValue,
   ) {
     if (maxBytes <= 0) return oldValue;
-    final bytes = utf8.encode(newValue.text);
-    if (bytes.length <= maxBytes) return newValue;
+    if (_effectiveByteLength(newValue.text) <= maxBytes) return newValue;
 
     final truncated = _truncateToMaxBytes(newValue.text, maxBytes);
     return TextEditingValue(
@@ -25,6 +30,14 @@ class Utf8LengthLimitingTextInputFormatter extends TextInputFormatter {
   }
 
   String _truncateToMaxBytes(String text, int limit) {
+    if (encoder != null) {
+      final runes = text.runes.toList();
+      while (runes.isNotEmpty &&
+          _effectiveByteLength(String.fromCharCodes(runes)) > maxBytes) {
+        runes.removeLast();
+      }
+      return String.fromCharCodes(runes);
+    }
     final buffer = StringBuffer();
     var used = 0;
     for (final rune in text.runes) {