format files

- Introduced `mesh_ui.dart` with reusable widgets including SectionHeader, MeshCard, StatusChip, StatTile, AvatarCircle, SignalBars, RouteChip, PulseDot, BottomSheetHeader, ErrorRetryCard, and ListEntrance.
- Implemented `path_map_ui.dart` for path map screens, featuring path distance calculations, playback controls, and a summary list of observed paths.
- Created `themed_map_tile_layer.dart` for shared cached map tiles with automatic dark-mode treatment.

.gitignore

@@ -33,6 +33,9 @@ migrate_working_dir/
 pubspec.lock
 /build/
 /coverage/
+# fvm project files
+.fvm/
+.fvmrc
 
 # Symbolication related
 app.*.symbols
@@ -58,6 +61,7 @@ secrets.dart
 .DS_Store
 .AppleDouble
 .LSOverride
+macos/Flutter/GeneratedPluginRegistrant.swift
 
 # iOS
 **/ios/Pods/
@@ -83,6 +87,10 @@ keystore.properties
 # IDE
 .vscode/launch.json
 .vscode/settings.json
+.contextstream/
 
 # Cloudflare Wrangler
-.wrangler
+.wrangler
+
+# Claude Code local working dir (worktrees, jobs, settings)
+.claude/

AGENTS.md

@@ -6,7 +6,7 @@
 
 ## BLE Frames & Protocol Notes
 - Nordic UART Service (NUS) UUIDs: Service `6e400001-b5a3-f393-e0a9-e50e24dcca9e`, RX `6e400002-b5a3-f393-e0a9-e50e24dcca9e`, TX `6e400003-b5a3-f393-e0a9-e50e24dcca9e`.
-- Discovery: scans for device name prefix `MeshCore-` and filters by `platformName`/`advertisementData.advName`.
+- Discovery: scans for device names matching known prefixes and filters by `platformName`/`advertisementData.advName`.
 - Frames are capped at `maxFrameSize = 172` bytes; byte 0 is the command/response/push code. I/O is `MeshCoreConnector.sendFrame` and `MeshCoreConnector.receivedFrames`.
 - Command codes (to device): `cmdAppStart`=1, `cmdSendTxtMsg`=2, `cmdSendChannelTxtMsg`=3, `cmdGetContacts`=4, `cmdGetDeviceTime`=5, `cmdSetDeviceTime`=6, `cmdSendSelfAdvert`=7, `cmdSetAdvertName`=8, `cmdAddUpdateContact`=9, `cmdSyncNextMessage`=10, `cmdSetRadioParams`=11, `cmdSetRadioTxPower`=12, `cmdResetPath`=13, `cmdSetAdvertLatLon`=14, `cmdRemoveContact`=15, `cmdShareContact`=16, `cmdExportContact`=17, `cmdImportContact`=18, `cmdReboot`=19, `cmdSendLogin`=26, `cmdGetChannel`=31, `cmdSetChannel`=32, `cmdGetRadioSettings`=57.
 - Response codes (from device): `respCodeOk`=0, `respCodeErr`=1, `respCodeContactsStart`=2, `respCodeContact`=3, `respCodeEndOfContacts`=4, `respCodeSelfInfo`=5, `respCodeSent`=6, `respCodeContactMsgRecv`=7, `respCodeChannelMsgRecv`=8, `respCodeCurrTime`=9, `respCodeNoMoreMessages`=10, `respCodeContactMsgRecvV3`=16, `respCodeChannelMsgRecvV3`=17, `respCodeChannelInfo`=18, `respCodeRadioSettings`=25.

CLAUDE.md

@@ -1,6 +1,6 @@
 # MeshCore Open - Flutter Client
 
-Open-source Flutter client for MeshCore LoRa mesh networking devices.
+Open-source Flutter client for MeshCore LoRa mesh networking devices. Connects to MeshCore-compatible radios over **BLE, TCP, or USB serial** and provides direct/channel chat, contact and channel management, on-map node tracking, repeater administration, and on-device message translation.
 
 ## Build Commands
 
@@ -17,6 +17,9 @@ Open-source Flutter client for MeshCore LoRa mesh networking devices.
 # Build iOS
 ~/flutter/bin/flutter build ios
 
+# Build versioned web release (uses build_pipe)
+~/flutter/bin/dart run build_pipe
+
 # Run static analysis
 ~/flutter/bin/flutter analyze
 
@@ -28,43 +31,132 @@ Open-source Flutter client for MeshCore LoRa mesh networking devices.
 
 ```
 lib/
-├── main.dart                    # App entry point, MaterialApp setup with Provider
-├── connector/
-│   └── meshcore_connector.dart  # BLE communication layer (MeshCoreConnector)
-├── screens/
-│   ├── scanner_screen.dart      # BLE device scanning (home screen)
-│   ├── device_screen.dart       # Connected device hub with navigation
-│   ├── chat_screen.dart         # Chat interface (placeholder)
-│   ├── contacts_screen.dart     # Contacts list (placeholder)
-│   └── settings_screen.dart     # Device info and app settings
-└── widgets/
-    └── device_tile.dart         # Device list item with signal strength
+├── main.dart        # Entry point: MultiProvider wiring, locale + theme, initial route
+├── connector/       # Unified BLE/TCP/USB transport layer
+│   ├── meshcore_connector.dart       # Central state holder + ChangeNotifier (all transports)
+│   ├── meshcore_connector_tcp.dart   # TCP transport helper
+│   ├── meshcore_connector_usb.dart   # USB serial transport helper
+│   ├── meshcore_protocol.dart        # Frame size + version constants
+│   └── meshcore_uuids.dart           # Nordic UART UUIDs + scan name prefixes
+├── models/          # Plain data classes (Contact, Channel, Message, Community, …)
+├── services/        # ChangeNotifier services + IO services (retry, translation, ML, …)
+├── storage/         # SharedPreferences-backed stores, scoped per device key
+├── helpers/         # Pure utilities (Smaz compression, GIF parsing, scroll helpers)
+├── utils/           # Platform / IO / UX utilities (logger, GPX export, dialogs)
+├── theme/           # MeshPalette (defined, not yet wired in main.dart)
+├── l10n/            # ARB localization for 18 locales
+├── icons/           # Custom icon widgets
+├── widgets/         # Reusable widgets (AppBar, BatteryUi, QR, jump-to-bottom, …)
+└── screens/         # ~26 screens — see Screens section below
 ```
 
+## Screens
+
+All screens are fully implemented (no remaining placeholders).
+
+### Connection / Scanning
+| Screen | Purpose |
+|---|---|
+| `scanner_screen.dart` | BLE device scan and connect — main entry point |
+| `tcp_screen.dart` | Connect to a MeshCore device over TCP/IP |
+| `usb_screen.dart` | Connect to a MeshCore device over USB serial |
+| `discovery_screen.dart` | Browse all discovered (non-contact) mesh nodes |
+| `chrome_required_screen.dart` | Web gate for non-Chrome browsers (BLE unavailable) |
+
+### Chat / Messaging
+| Screen | Purpose |
+|---|---|
+| `chat_screen.dart` | Direct (private) messaging with a contact |
+| `channel_chat_screen.dart` | Group messaging inside a named channel |
+| `channels_screen.dart` | List and manage channels (add/edit/delete) |
+| `channel_message_path_screen.dart` | Hop-by-hop route a channel message took, with map overlay |
+
+### Contacts / Neighbors
+| Screen | Purpose |
+|---|---|
+| `contacts_screen.dart` | Full contacts list with previews and management |
+| `neighbors_screen.dart` | Nodes directly heard by the connected radio (one-hop) |
+
+### Repeater Management
+| Screen | Purpose |
+|---|---|
+| `repeater_hub_screen.dart` | Top-level repeater hub; navigates to sub-screens |
+| `repeater_status_screen.dart` | Live status of a managed repeater node |
+| `repeater_cli_screen.dart` | Raw command-line interface to a repeater |
+| `repeater_settings_screen.dart` | Full radio/node settings editor for a repeater |
+
+### Map / Location
+| Screen | Purpose |
+|---|---|
+| `map_screen.dart` | Main map view of contacts/nodes with live GPS positions |
+| `line_of_sight_map_screen.dart` | Terrain LOS analysis between configurable endpoints |
+| `path_trace_map.dart` | Animates the hop path a direct message traveled |
+| `map_cache_screen.dart` | Download/clear offline map tile cache |
+| `community_qr_scanner_screen.dart` | Scan QR to join a mesh community/channel |
+
+### Settings / Debug / Diagnostics
+| Screen | Purpose |
+|---|---|
+| `settings_screen.dart` | Connected device settings: radio params, identity, GPS |
+| `app_settings_screen.dart` | App preferences: theme, units, map source, notifications |
+| `app_debug_log_screen.dart` | In-app log viewer (app-layer messages) |
+| `ble_debug_log_screen.dart` | In-app log viewer (raw BLE frame traffic) |
+| `companion_radio_stats_screen.dart` | RF stats (RSSI, SNR, packet counts) for paired radio |
+| `telemetry_screen.dart` | Battery / sensor / environmental telemetry for a contact |
+
 ## Architecture
 
 ### State Management
-- **Provider** with `ChangeNotifier` pattern
-- `MeshCoreConnector` is the central state holder for BLE connection
-- Screens use `Consumer<MeshCoreConnector>` for reactive UI updates
+
+`Provider` with `ChangeNotifier`. `main.dart` wires a `MultiProvider` with the following:
+
+| Provider | Role |
+|---|---|
+| `MeshCoreConnector` | Active transport (BLE/TCP/USB), connection state, frame I/O |
+| `MessageRetryService` | ACK tracking and retry scheduling with backoff |
+| `PathHistoryService` | Per-contact routing history (LRU cache, 50 contacts) |
+| `AppSettingsService` | App preferences (theme, units, locale, notifications) |
+| `BleDebugLogService` | Raw BLE frame log buffer |
+| `AppDebugLogService` | Structured app log buffer |
+| `ChatTextScaleService` | Pinch-to-zoom text scale for chat screens |
+| `TranslationService` | On-device LLM translation (llamadart) |
+| `UiViewStateService` | Contacts/channels sort/filter/search state |
+| `TimeoutPredictionService` | ML linear regression for ACK timeout prediction |
+| `StorageService` | Path history + delivery observation persistence |
+| `MapTileCacheService` | OSM tile pre-cache |
+
+Screens consume these via `Consumer<T>` (or `context.watch<T>()` / `context.read<T>()`) for reactive UI.
+
+### Storage / Persistence
+
+All stores in `lib/storage/` use `PrefsManager` (a `SharedPreferences` singleton initialized in `main()`). Most stores **scope keys by the first 10 hex chars of the connected device's public key**, so per-radio data is isolated.
+
+| Store | Persists |
+|---|---|
+| `message_store`, `channel_message_store` | Direct + channel messages |
+| `contact_store`, `contact_discovery_store` | Known + discovered contacts |
+| `channel_store`, `channel_order_store`, `channel_settings_store` | Channels, display order, per-channel Smaz toggle |
+| `community_store` | Communities (32-byte shared secrets) |
+| `contact_group_store`, `contact_settings_store` | Groups, per-contact Smaz toggle |
+| `unread_store` | Per-contact unread counts (debounced writes) |
+
+GGUF translation models are stored as files (not SharedPreferences) via `translation_file_store`.
 
 ### Theming
 - Material 3 design (`useMaterial3: true`)
 - System-based dark/light mode (`ThemeMode.system`)
 - Blue color scheme seed
+- `lib/theme/mesh_theme.dart` defines a warm-dark `MeshPalette` (phosphor-green accents) but is **not currently wired** in `main.dart` — available for a future redesign
 
-## BLE Protocol
+### Localization
 
-### Nordic UART Service (NUS)
-- **Service UUID**: `6e400001-b5a3-f393-e0a9-e50e24dcca9e`
-- **RX Characteristic**: `6e400002-b5a3-f393-e0a9-e50e24dcca9e` (Write to device)
-- **TX Characteristic**: `6e400003-b5a3-f393-e0a9-e50e24dcca9e` (Notify from device)
+18 locales supported via Flutter's standard ARB pipeline (`lib/l10n/`): en, de, es, fr, it, pt, ru, uk, bg, hu, ja, ko, nl, pl, sk, sl, sv, zh. Language override comes from `AppSettingsService.settings.languageOverride`. Use the `context.l10n` extension (`lib/l10n/l10n.dart`) for translated strings; contact-type names live in `contact_localization.dart`.
 
-### Device Discovery
-- Scans for devices with name prefix `MeshCore-`
-- Filters by `platformName` or `advertisementData.advName`
+## Transports
 
-### Connection States
+`MeshCoreConnector` unifies all three transports under one `ChangeNotifier`. There is **no shared base class** — selection is via the `MeshCoreTransportType { bluetooth, usb, tcp }` enum, and BLE/TCP/USB share the same connection-state enum, send/receive API, and frame protocol.
+
+### Connection State
 ```dart
 enum MeshCoreConnectionState {
   disconnected,
@@ -75,28 +167,136 @@ enum MeshCoreConnectionState {
 }
 ```
 
-### Frame I/O
-- **Send**: `MeshCoreConnector.sendFrame(Uint8List data)`
-- **Receive**: `MeshCoreConnector.receivedFrames` stream of `Uint8List`
+### Frame I/O (all transports)
+- **Send**: `MeshCoreConnector.sendFrame(Uint8List data, {String? channelSendQueueId, bool expectsGenericAck})`
+- **Receive**: `Stream<Uint8List> get receivedFrames`
+- **Protocol constants** (`meshcore_protocol.dart`): `maxFrameSize = 172`, `maxTextPayloadBytes = 160`, `appProtocolVersion = 4`
+
+### BLE — Nordic UART Service (NUS)
+- **Service UUID**: `6e400001-b5a3-f393-e0a9-e50e24dcca9e`
+- **RX Characteristic** (write to device): `6e400002-b5a3-f393-e0a9-e50e24dcca9e`
+- **TX Characteristic** (notify from device): `6e400003-b5a3-f393-e0a9-e50e24dcca9e`
+- **Discovery**: scans for devices whose name starts with `MeshCore-`, `Whisper-`, `WisCore-`, `Seeed`, `Lilygo`, `HT-`, or `LowMesh_MC_` (filters on both `platformName` and `advertisementData.advName`)
+- **Linux**: `linux_ble_pairing_service.dart` falls back to `bluetoothctl` when BlueZ agent prompts fail
+
+### TCP
+- Manual host/port entry, persisted via `AppSettingsService` (`tcpServerAddress`, `tcpServerPort`)
+- UI hint: `192.168.40.10` / port `5000`
+- Disabled on web (`PlatformInfo.isWeb`)
+- API: `MeshCoreConnector.connectTcp(host: ..., port: ...)`
+
+### USB Serial (flserial)
+- Default baud rate: `115200`
+- Port enumeration: `MeshCoreConnector.listUsbPorts()`
+- COBS-framed packets via `usb_serial_frame_codec.dart`
+- macOS device-name resolution via `ioreg` (`utils/macos_usb_device_names.dart`)
+- API: `MeshCoreConnector.connectUsb(portName: ..., baudRate: 115200)`
 
 ## Dependencies
 
+App version: `8.0.0+11` — Dart SDK constraint: `^3.9.2`
+
+**Connectivity**
+
 | Package | Version | Purpose |
 |---------|---------|---------|
-| flutter_blue_plus | ^2.1.0 | BLE communication |
-| provider | ^6.1.5+1 | State management |
-| cupertino_icons | ^1.0.8 | iOS-style icons |
+| flutter_blue_plus | ^2.1.0 | BLE scanning, connecting, and UART data transfer |
+| flutter_blue_plus_platform_interface | ^8.2.1 | Platform-interface layer required by flutter_blue_plus |
+| flserial | git (MeshEnvy fork) | USB serial transport for wired device connections (TODO: upstream pending) |
+
+**State / Storage**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| provider | ^6.1.5+1 | ChangeNotifier-based state management across screens |
+| shared_preferences | ^2.2.2 | Persistent key-value storage for user settings |
+| path_provider | ^2.1.5 | Locates platform-appropriate directories for file I/O |
+
+**Crypto**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| crypto | ^3.0.3 | SHA/HMAC hashing used in message authentication |
+| pointycastle | ^4.0.0 | AES encryption/decryption for channel and direct messages |
+| uuid | ^4.3.3 | Generates UUIDs for message and contact identity |
+
+**Maps & Location**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| flutter_map | ^8.2.2 | Interactive tile map for node positions and path traces |
+| latlong2 | ^0.9.1 | LatLng coordinate type used throughout map and GPS code |
+| gpx | ^2.3.0 | Export node paths as GPX track files |
+
+**UI**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| material_symbols_icons | ^4.2906.0 | Extended Material Symbols icon set (line-of-sight, etc.) |
+| flutter_svg | ^2.0.10+1 | Renders SVG assets (custom icons such as LoS indicator) |
+| cached_network_image | ^3.4.1 | Caches map tile images downloaded over the network |
+| flutter_cache_manager | ^3.4.1 | Underlying cache manager used by cached_network_image |
+| flutter_linkify | ^6.0.0 | Auto-detects and makes URLs tappable in chat messages |
+| mobile_scanner | ^7.1.4 | QR/barcode scanning for contact and channel import |
+| qr_flutter | ^4.1.0 | Generates QR codes for sharing contacts and channels |
+| cupertino_icons | ^1.0.8 | iOS-style icon font (bundled for completeness) |
+| characters | ^1.4.0 | Unicode-aware string operations for message text handling |
+
+**Notifications / Background**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| flutter_local_notifications | ^20.1.0 | Shows local push notifications for incoming messages |
+| flutter_foreground_task | ^9.2.0 | Keeps the app alive in background to maintain BLE/USB connection |
+
+**ML / AI**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| ml_algo | ^16.0.0 | OLS regression used in `timeout_prediction_service.dart` to predict message ACK timeouts |
+| ml_dataframe | ^1.0.0 | DataFrame input format required by ml_algo |
+| llamadart | >=0.6.8 <0.7.0 | On-device LLM inference used in `translation_service.dart` for message translation |
+
+**Misc**
+
+| Package | Version | Purpose |
+|---------|---------|---------|
+| http | ^1.2.0 | Fetches tile URLs and any remote API calls |
+| url_launcher | ^6.3.0 | Opens URLs in the system browser from linkified chat text |
+| share_plus | ^12.0.1 | Shares files (e.g. exported GPX tracks) via the system share sheet |
+| package_info_plus | ^9.0.0 | Reads app version/build number displayed in settings |
+| web | ^1.1.1 | Web-platform APIs for USB serial and browser detection on Flutter Web |
+| intl | any | Internationalization and locale formatting (required by flutter_localizations) |
+| build_pipe | ^0.3.1 | CI/CD build pipeline configuration (web release builds with versioned assets) |
 
 ## Platform Configuration
 
 ### Android (`android/app/src/main/AndroidManifest.xml`)
-- `BLUETOOTH`, `BLUETOOTH_ADMIN` (API 30 and below)
-- `BLUETOOTH_SCAN`, `BLUETOOTH_CONNECT`, `BLUETOOTH_ADVERTISE` (API 31+)
-- `ACCESS_FINE_LOCATION`, `ACCESS_COARSE_LOCATION` (for BLE scanning)
+- `INTERNET` (map tiles, translation model downloads)
+- `BLUETOOTH`, `BLUETOOTH_ADMIN` (API ≤ 30)
+- `BLUETOOTH_SCAN` (with `neverForLocation`), `BLUETOOTH_CONNECT`, `BLUETOOTH_ADVERTISE` (API 31+)
+- `ACCESS_FINE_LOCATION`, `ACCESS_COARSE_LOCATION` (BLE scanning on API ≤ 30)
+- `POST_NOTIFICATIONS` (API 33+)
+- `FOREGROUND_SERVICE`, `FOREGROUND_SERVICE_CONNECTED_DEVICE` (background BLE/USB connection)
+- `WAKE_LOCK`
+- `CAMERA` (QR scanning, declared as optional feature)
+- USB host hardware feature (optional)
+
+`flutter_foreground_task` registers a `ForegroundService` with `foregroundServiceType="connectedDevice"` and `stopWithTask="false"`.
+
+**Build config (`android/app/build.gradle.kts`)**: `applicationId = com.meshcore.meshcore_open`, NDK `29.0.14206865`, Java 8 core-library desugaring (`desugar_jdk_libs:2.1.4`), release signing via `key.properties` (debug fallback).
 
 ### iOS (`ios/Runner/Info.plist`)
-- `NSBluetoothAlwaysUsageDescription`
-- `NSBluetoothPeripheralUsageDescription`
+- `NSBluetoothAlwaysUsageDescription`, `NSBluetoothPeripheralUsageDescription`
+- `NSCameraUsageDescription` (QR scanning to join communities)
+- Background modes: `bluetooth-central`
+- `LSApplicationQueriesSchemes`: `http`, `https`
+
+### Web (`web/`)
+PWA scaffold present but boilerplate (`manifest.json` and `index.html` are unmodified Flutter defaults). BLE is unsupported in browsers; TCP and Web Serial USB may work in Chrome only. `ChromeRequiredScreen` gates non-Chrome web users. Versioned releases are produced via `build_pipe` (`?v=<pubspec version>` cache busting, no service worker).
+
+### Desktop
+`linux/`, `windows/`, and `macos/` directories are present as Flutter scaffolds. No app-specific native config has been added; BLE on desktop has not been validated.
 
 ## Coding Conventions
 
@@ -123,14 +323,14 @@ enum MeshCoreConnectionState {
 
 | File | Purpose |
 |------|---------|
-| `lib/connector/meshcore_connector.dart` | All BLE logic - scanning, connecting, data transfer |
-| `lib/screens/scanner_screen.dart` | Entry point UI, device list |
-| `lib/main.dart` | App configuration, theme, Provider setup |
-| `pubspec.yaml` | Dependencies and project metadata |
-
-## Placeholder Screens
-
-The following screens are implemented as placeholders and need full implementation:
-- `chat_screen.dart` - Mesh chat functionality
-- `contacts_screen.dart` - Contact management
-- `settings_screen.dart` - Radio settings, node identity, location (partially implemented)
+| `lib/main.dart` | App configuration, MultiProvider setup, theme, locale, initial route |
+| `lib/connector/meshcore_connector.dart` | Unified BLE/TCP/USB transport state holder |
+| `lib/connector/meshcore_protocol.dart` | Frame size limits and protocol version |
+| `lib/connector/meshcore_uuids.dart` | NUS UUIDs and BLE scan name prefixes |
+| `lib/services/app_settings_service.dart` | App-wide settings (`AppSettings` JSON in SharedPreferences) |
+| `lib/services/storage_service.dart` | Path history + delivery observation persistence |
+| `lib/services/message_retry_service.dart` | ACK tracking + retry scheduling |
+| `lib/services/translation_service.dart` | On-device LLM translation (llamadart) |
+| `lib/storage/prefs_manager.dart` | SharedPreferences singleton initialized in `main()` |
+| `lib/screens/scanner_screen.dart` | Home screen — BLE scan and connect |
+| `pubspec.yaml` | Dependencies and project metadata (current version `8.0.0+11`) |

CONTRIBUTING.md

@@ -0,0 +1,71 @@
+# How to contribute to Meshcore Open
+
+Before submitting any pull requests (PR), please review the following information.
+
+Unsolicited PRs without previous discussion or open issues may be
+rejected. As may changes that are too broad (i.e. 100 files changed) or that
+cover too many separate changes. If the changes are clearly AI generated they
+may also be rejected. [See more](#ai-use)
+
+## First Step Checklist
+
+### **Did you find a bug?**
+
+* **Ensure the bug was not already reported** by searching on GitHub under [Issues](https://github.com/zjs81/meshcore-open/issues).
+
+* If you're unable to find an open issue addressing the problem, [open a new one](https://github.com/zjs81/meshcore-open/issues/new).
+Be sure to include a **title and clear description**, as much relevant
+information as possible, and a **code sample** or an **executable test case**
+demonstrating the expected behavior that is not occurring. You can also include
+screenshots or video.
+
+* DO NOT start work and submit a PR at this time, please discuss the issue and
+your implementation plan first.
+
+### **Did you fix whitespace, format code, or make a purely cosmetic patch?**
+
+Changes that are cosmetic in nature and do not add anything substantial to the
+stability, functionality, or testability of the application will generally not
+be accepted.
+
+### **Do you intend to add a new feature or change an existing one?**
+
+* Suggest your change in a new issue as a feature request.
+
+* DO NOT start work and submit a PR at this time, please discuss the change and
+your implementation plan first.
+
+* After it is generally decided that the feature or change fits the goals of the
+project you can start work or open a PR if you have already started.
+
+## Submitting your patch
+
+* All changes should be based on the `dev` branch. When creating your PR please
+be sure to change the target to merge into dev, and when starting work on a new
+branch be sure to start on latest `dev`.
+
+* Ensure the PR description clearly describes the problem and solution. Include
+the relevant issue number if applicable.
+
+* The PR should contain **one commit** only, the commit message should have a
+clear title followed by a new line and then brief description if needed. PR with
+multiple commits will be squashed into one before merging if required. See
+[Git Mastery](https://git-mastery.org/lessons/commitMessage/) for more
+information on good commit messages.
+
+* **Before committing changes** on your branch, be sure to run both
+`dart format .` and `flutter analyze`. The continuous development checks will
+fail if issues here are not addressed before hand.
+
+## AI-use
+
+Everyone loves some help, AI agents are a tool in many of our belts. The project
+is not anti-AI.
+
+There are some limits to acceptable use however. Generally:
+
+* All code generated by AI should be thoroughly reviewed by the contributor.
+* The changes should be tightly controlled to not change anything out of scope
+for the patch, bug fix, etc.
+* The contributor should have a good understanding of what the code does and how
+the application works in order to effectively be able to manage the agent.

README.md

@@ -6,6 +6,8 @@ Open-source Flutter client for MeshCore LoRa mesh networking devices.
 
 MeshCore Open is a cross-platform mobile application for communicating with MeshCore LoRa mesh network devices via Bluetooth Low Energy (BLE). The app enables long-range, off-grid communication through peer-to-peer messaging, public channels, and mesh networking capabilities.
 
+**Website:** [meshcoreopen.org](https://meshcoreopen.org/)
+
 <a href="http://apps.obtainium.imranr.dev/redirect.html?r=obtainium://add/https://github.com/zjs81/meshcore-open">
         <img src="assets/badges/badge_obtainium.png" height="80" align="center" alt="Get it on Obtainium"/>
 </a>
@@ -51,7 +53,7 @@ MeshCore Open is a cross-platform mobile application for communicating with Mesh
 
 ### Device Management
 
-- **BLE Connection**: Scan and connect to MeshCore devices via Bluetooth
+- **BLE, USB, TCP Connection**: Scan and connect to MeshCore devices via Bluetooth, USB or TCP
 - **Device Settings**: Configure radio parameters, power settings, and network options
 - **Battery Monitoring**: Real-time battery status with chemistry-specific voltage curves
 - **Firmware Updates**: Over-the-air firmware updates via BLE (coming soon)
@@ -75,10 +77,16 @@ MeshCore Open is a cross-platform mobile application for communicating with Mesh
 
 ### Platform Support
 
-- ✅ **Android**: Full support (API 21+)
-- ✅ **iOS**: Full support (iOS 12+)
-- 🚧 **Desktop**: Limited support (macOS/Linux/Windows)
-- 🚧 **Web**: Under construction (Chrome)
+| Feature            | Android (API 21+) | iOS (12+) | Linux | Windows | macOS |                Web                |
+|--------------------|:-----------------:|:---------:|:-----:|:-------:|:-----:|:---------------------------------:|
+| BLE companion      | ✅                | ✅        | ✅   | ✅      | ✅    | ✅                                |
+| USB companion      | ✅                | 🚧        | ✅   | ✅      | ✅    | ✅                                |
+| TCP companion      | ✅                | 🚧        | ✅   | ✅      | ✅    | ❌<br>(requires websocket bridge) |
+| Core Functionality | ✅                | ✅        | ✅   | ✅      | ✅    | ✅                                |
+| Mesh Network       | ✅                | ✅        | ✅   | ✅      | ✅    | ✅                                |
+| Map & Location     | ✅                | ✅        | ✅   | ✅      | ✅    | ✅                                |
+| Device Management  | ✅                | ✅        | ✅   | ✅      | ✅    | ✅                                |
+| Repeater Hub       | ✅                | ✅        | ✅   | ✅      | ✅    | ✅                                |
 
 ### Dependencies
 
@@ -144,7 +152,8 @@ lib/
 ├── main.dart                    # App entry point
 ├── connector/
 │   ├── meshcore_connector.dart  # BLE communication & state management
-│   └── meshcore_protocol.dart   # Protocol definitions & frame parsing
+│   ├── meshcore_protocol.dart   # Protocol definitions & frame parsing
+│   └── meshcore_uuids.dart      # Device names and IDs (add prefixes here!)
 ├── screens/
 │   ├── scanner_screen.dart      # Device scanning (home screen)
 │   ├── contacts_screen.dart     # Contact list
@@ -178,7 +187,16 @@ lib/
 
 ### Device Discovery
 
-Devices are discovered by scanning for BLE advertisements with the name prefix `MeshCore-`
+Devices are discovered by scanning for BLE advertisements with known MeshCore device name prefixes. These are currently:
+    - `MeshCore-`
+    - `Whisper-`
+    - `WisCore-`
+    - `HT-`
+    - `LowMesh_MC_`
+    - `NRF52`
+
+New device prefixes can be added in `lib/connector/meshcore_uuids.dart`.
+
 
 ### Message Format
 
@@ -189,6 +207,7 @@ Messages are transmitted as binary frames using a custom protocol optimized for
 ### App Settings
 
 - **Theme**: System default, light, or dark mode
+- **Language**: Use one of 15 languages (English, Chinese, French, Spanish, Portuguese, German, Dutch, Polish, Swedish, Italian, Slovak, Slovene, Bulgarian, Russian, Ukrainian)
 - **Notifications**: Configurable for messages, channels, and node advertisements
 - **Battery Chemistry**: Support for NMC, LiFePO4, and LiPo battery types
 - **Message Retry**: Automatic retry with configurable path clearing

android/app/build.gradle.kts

@@ -16,7 +16,7 @@ if (keystorePropertiesFile.exists()) {
 android {
     namespace = "com.meshcore.meshcore_open"
     compileSdk = flutter.compileSdkVersion
-    ndkVersion = flutter.ndkVersion
+    ndkVersion = "29.0.14206865"
 
     compileOptions {
         sourceCompatibility = JavaVersion.VERSION_17

docs/BLE_PROTOCOL.md

@@ -21,7 +21,12 @@ The MeshCore BLE protocol implements a binary frame-based communication system u
 
 ### Connection Flow
 
-1. **Scan** for devices with name prefix `MeshCore-`
+1. **Scan** for devices with known name prefixes (defined in `MeshCoreUuids.deviceNamePrefixes`):
+    - `MeshCore-`
+    - `Whisper-`
+    - `WisCore-`
+    - `HT-`
+    - `LowMesh_MC_`
 2. **Connect** with 15-second timeout
 3. **Request MTU** of 185 bytes (falls back to default if unsupported)
 4. **Discover services** and locate NUS characteristics

documentation/README.md

@@ -0,0 +1,30 @@
+# MeshCore Open - Feature Documentation
+
+MeshCore Open is an open-source Flutter client for MeshCore LoRa mesh networking devices. This documentation covers every user-facing feature, how to access it, and what it does.
+
+## Table of Contents
+
+1. [Scanner & Connection](scanner-and-connection.md) - BLE scanning, USB serial, and TCP connection
+2. [Navigation](navigation.md) - App flow, device screen, and quick-switch navigation
+3. [Contacts](contacts.md) - Contact management, groups, discovery, and sharing
+4. [Chat & Messaging](chat-and-messaging.md) - Direct messages, message status, reactions, and retries
+5. [Channels](channels.md) - Broadcast channels, communities, and channel chat
+6. [Map & Location](map-and-location.md) - Node map, path tracing, line-of-sight, and offline caching
+7. [Settings](settings.md) - Device settings, app settings, radio configuration, and exports
+8. [Notifications](notifications.md) - System notifications, unread badges, and notification preferences
+9. [Repeater Management](repeater-management.md) - Repeater hub, status, CLI, telemetry, and neighbors
+10. [Additional Features](additional-features.md) - GIF picker, localization, debug logs, SMAZ compression, and more
+11. [BLE Protocol & Data Layer](ble-protocol.md) - Technical reference for the communication protocol and data architecture
+
+## App Overview
+
+MeshCore Open connects to MeshCore LoRa mesh radios over BLE, USB, or TCP. Once connected, users can:
+
+- **Chat** with other mesh nodes via encrypted direct messages
+- **Broadcast** on shared channels (public, hashtag, private, or community-scoped)
+- **View nodes on a map** with GPS locations, predicted positions, and path traces
+- **Manage repeaters** with CLI access, telemetry, neighbor info, and settings
+- **Share contacts** via `meshcore://` URIs and QR codes
+- **Configure radio settings** including frequency, power, bandwidth, and spreading factor
+- **Cache offline maps** for use without internet connectivity
+- **Analyze line-of-sight** between nodes with terrain elevation profiles

documentation/additional-features.md

@@ -0,0 +1,261 @@
+# Additional Features
+
+## GIF Picker (Giphy Integration)
+
+### How to Access
+In any chat screen (direct or channel), tap the GIF button in the message input bar.
+
+### What the User Sees
+A bottom sheet with a search field and a grid of GIF thumbnails.
+
+### Key Interactions
+- On open, loads trending GIFs (G-rated, 25 results)
+- Type to search and press the keyboard submit button (search triggers on submit, not on each keystroke). Clearing the search field reloads trending GIFs
+- On network/API errors, a "Retry" button is shown in-place
+- Tap a GIF to select it — the chat input shows an inline preview with an X button to dismiss
+- Send the message to transmit the GIF reference (`g:<giphy-id>`)
+- Recipients see the GIF rendered inline via Giphy CDN
+- "Powered by Giphy" attribution is always shown at the bottom of the picker
+- The bottom sheet occupies 70% of screen height
+
+---
+
+## Localization / Multi-Language Support
+
+### How to Access
+App Settings → Appearance → Language
+
+### Supported Languages (18)
+English, French, Spanish, German, Polish, Slovenian, Portuguese, Italian, Chinese, Swedish, Dutch, Slovak, Bulgarian, Russian, Ukrainian, Hungarian, Japanese, Korean
+
+### How It Works
+- All UI strings go through Flutter's ARB localization system
+- Language can follow the system locale or be explicitly overridden
+- Changes take effect immediately
+
+---
+
+## Discovered Contacts Screen
+
+### How to Access
+From Contacts screen → overflow menu → "Discovered Contacts"
+
+### What the User Sees
+A list of nodes heard passively over the air but not yet added as contacts. Each shows:
+- Color-coded avatar (by type)
+- Name
+- Short public key
+- Last-seen time
+
+### Key Interactions
+- Search bar with debounced filtering
+- Sort by last seen or name; filter by type
+- **Tap**: Import the contact (adds to your contact list)
+- **Long-press**: Add Contact, Copy `meshcore://` URI to clipboard, or Delete
+- Overflow menu → "Delete All" (with confirmation)
+- Already-known contacts and your own node are filtered out
+
+---
+
+## SMAZ Compression
+
+### What It Is
+An optional per-contact and per-channel text compression feature using the SMAZ algorithm (optimized for short English text).
+
+### How to Enable
+- **Per contact**: Chat screen → info button → toggle "SMAZ compression"
+- **Per channel**: Long-press channel → Edit → toggle "SMAZ compression"
+
+### How It Works
+- When enabled, compression is applied using a "compress only if smaller" strategy — the message is only transmitted compressed if the encoded result is actually shorter than the original. Otherwise, the original text is sent uncompressed
+- Compressed messages are transmitted with a `s:` prefix followed by base64-encoded data
+- Recipients using MeshCore Open will decompress automatically. **Recipients using other software** that is not SMAZ-aware will see garbled `s:...` text
+- The codec operates on ASCII. Non-ASCII / non-English text generally does not benefit from compression and may even expand. Best suited for short English messages
+- Disabled by default
+
+---
+
+## Community QR Scanner
+
+### How to Access
+From Channels screen → "+" FAB → "Scan Community QR"
+
+### What the User Sees
+A live QR scanner view with instruction text overlay.
+
+### Key Interactions
+- Scan a community QR code shared by another member
+- On valid scan: confirmation dialog showing community name and ID
+- Option to "Add public channel to device" on join
+- If already a member: shows an "Already a member" dialog
+- Invalid QR: shows an orange error snackbar
+
+---
+
+## Channel Message Path Viewing
+
+### How to Access
+In a channel chat, tap a message bubble (mobile) or use the "Path" action (desktop).
+
+### What the User Sees
+- Summary card: sender, time, repeat count, path type, observed hops
+- "Other Observed Paths" section (if multiple paths detected)
+- "Repeater Hops" section listing each hop with hex prefix, resolved name, and GPS coordinates
+
+### Actions
+- **Radar icon**: Opens path trace map for live trace
+- **Map icon**: Opens a map with hop markers and polyline
+- **Path dropdown**: Switch between observed path variants (if multiple)
+
+---
+
+## Debug Logging
+
+### BLE Debug Log
+**Access**: Settings → BLE Debug Log
+
+Two views:
+- **Frames**: Each BLE frame with direction, description, hex preview, timestamp. Long-press to copy hex.
+- **Raw Log RX**: Decoded LoRa packets with route type, payload type, path bytes, and summary.
+
+### App Debug Log
+**Access**: Settings → App Debug Log (must be enabled first in App Settings → Debug)
+
+Structured log entries with level (Info/Warning/Error), tag, message, and timestamp.
+
+Both logs support copy-all and clear operations.
+
+---
+
+## Chrome Required Screen
+
+### When It Appears
+Automatically shown on web platforms when a non-Chromium browser is detected.
+
+### What the User Sees
+A full-screen informational page explaining that Web Bluetooth requires a Chromium-based browser. No interactive elements — purely informational.
+
+---
+
+## Path History Service
+
+### What It Does (Background Service)
+Maintains an in-memory LRU cache of up to 50 contacts, each with up to 100 route history entries, tracking:
+- Hop count and trip time
+- Success/failure counts and route weights
+- Flood vs. direct discovery
+
+### Path Scoring
+Paths are scored using a weighted formula: reliability (45%), route weight (20%), latency (25%), and freshness (10%). These weights are internal and not user-configurable. Paths whose weight drops to zero or below are automatically deleted. Flood deliveries that receive an ACK give a weight boost (+0.5) to the specific return path.
+
+Used internally for:
+- **Auto route rotation**: Cycles through known paths using configurable weights on retries, with a diversity window to avoid re-using recently tried paths
+- **Path selection**: Picks the best-scored path for each retry attempt
+- **Flood statistics**: Tracks flood vs. direct discovery ratios
+
+---
+
+## Message Retry Service
+
+### What It Does (Background Service)
+Handles reliable delivery of outgoing direct messages:
+1. Assigns a UUID and sends immediately. Only one message per contact can be in-flight at a time (avoids overflowing the firmware's 8-entry ACK table); subsequent messages are queued
+2. Listens for ACK frames matched via SHA-256 hash of `[timestamp][attempt][text][sender_pubkey]`
+3. On timeout, retries with exponential backoff: `1000 × 2^retryCount` ms (1s, 2s, 4s, 8s...)
+4. Each retry may use a different path (via path history diversity window)
+5. After max retries: marks failed but keeps a **30-second grace window** during which a late ACK can still resolve the message to "delivered". Optionally clears the contact's path
+6. Reports RTT and path data for quality learning
+7. Maintains an ACK hash history (last 50 entries) to handle duplicate ACKs
+
+### Configurable Settings (App Settings → Messaging)
+- Max retries (2–10, default 5)
+- Clear path on max retry (on/off)
+- Auto route rotation with weight parameters
+
+---
+
+## Timeout Prediction (ML)
+
+### What It Does (Background Service)
+An ML-based service that predicts expected delivery timeouts:
+- Collects delivery observations (path length, message size, time since last RX, delivery time) in a sliding window of up to 100 observations (oldest evicted first)
+- Requires **10 minimum observations** before first training. After that, retrains every 5 new observations
+- Applies a **1.5x safety margin** to raw predictions (the actual timeout issued is 1.5× the model's predicted delivery time)
+- Features with zero variance are automatically excluded from training
+- Blends per-contact statistics with ML predictions
+- Falls back to `3000 + 3000 × pathLength` ms when insufficient data
+- Observations are persisted to storage via a 2-second debounced timer (observations within 2s of app termination may be lost)
+
+---
+
+## On-Device Message Translation
+
+### What It Is
+An optional on-device translation service powered by an embedded LLM (llamadart, running GGUF models). Translation runs entirely on-device — no data leaves the app.
+
+### How to Access
+Tap the translate button on any received message. On first use, the GGUF model file is downloaded and cached locally.
+
+### How It Works
+- Model files are managed by `TranslationFileStore`; download progress is shown in-place
+- Translation runs via `TranslationService` using the llamadart CPU backend (arm64 and x64 on Android)
+- Translated text is shown in `TranslatedMessageContent` as an inline overlay on the original message bubble
+- Each translation is cached; re-tapping shows the cached result without re-running inference
+
+---
+
+## Emoji Reactions
+
+### How to Access
+Long-press a message bubble in any direct or channel chat, then select a reaction emoji.
+
+### What the User Sees
+An emoji picker inline with common reactions. Selected reactions appear below the message bubble with a count.
+
+### How It Works
+- Implemented via `emoji_picker.dart` and `reaction_helper.dart`
+- Reactions are transmitted as a special message type visible to all participants with MeshCore Open
+
+---
+
+## Linkification
+
+### What It Does
+URLs and `meshcore://` URIs in received messages are automatically detected and rendered as tappable links.
+
+### How It Works
+- Powered by the `flutter_linkify` package via `link_handler.dart`
+- Tapping a URL opens the system browser; tapping a `meshcore://` URI imports the contact
+
+---
+
+## GPX Export
+
+### How to Access
+Settings → Export section (three options: Export Repeaters, Export Contacts, Export All).
+
+### What It Does
+Exports contacts with GPS coordinates to a `.gpx` file via the OS share sheet. Not available on web.
+
+---
+
+## Pinch-to-Zoom Chat Text
+
+### What It Does
+Users can pinch to scale all chat text up or down within a session.
+
+### How It Works
+- Implemented via `ChatTextScaleService` and `ChatZoomWrapper`
+- Scale range: 0.8× to 1.8×
+- The chosen scale persists across the session via the service
+
+---
+
+## Background Service (Android)
+
+### What It Does
+On Android, a foreground service (`background_service.dart`) keeps the BLE connection and message handling alive when the app is in the background. On other platforms this is a no-op.
+
+### User Impact
+- A persistent notification appears while the service is running
+- Messages are received and retry logic continues even when the app is not in the foreground

documentation/ble-protocol.md

@@ -0,0 +1,255 @@
+# BLE Protocol & Data Layer
+
+This is a technical reference for the communication protocol and data architecture.
+
+## Transport Layer
+
+The app supports three transports, all sharing the same command/response protocol:
+
+| Transport | Method | Implementation |
+|---|---|---|
+| Bluetooth LE | Nordic UART Service (NUS) GATT | `flutter_blue_plus` |
+| USB Serial | Packet-framed serial | `MeshCoreUsbManager` |
+| TCP | Packet-framed socket | `MeshCoreTcpConnector` |
+
+### BLE (Nordic UART Service)
+
+- **Service UUID**: `6e400001-b5a3-f393-e0a9-e50e24dcca9e`
+- **RX Characteristic** (write to device): `6e400002-b5a3-f393-e0a9-e50e24dcca9e`
+- **TX Characteristic** (notify from device): `6e400003-b5a3-f393-e0a9-e50e24dcca9e`
+
+Raw `Uint8List` payloads are written directly to the RX characteristic. Writes use "write without response" if supported, falling back to "write with response".
+
+### USB and TCP Framing
+
+Both use a lightweight packet framing codec:
+
+```
+TX (host → device):  [0x3C][len_lo][len_hi][payload...]
+RX (device → host):  [0x3E][len_lo][len_hi][payload...]
+```
+
+- Frame start: `0x3C` (`<`) for outgoing, `0x3E` (`>`) for incoming
+- Length: 2-byte little-endian, payload only
+- Max payload: 172 bytes
+- TCP: `tcpNoDelay: true` (Nagle disabled), writes serialized to prevent interleaving
+
+## Connection State Machine
+
+```
+enum MeshCoreConnectionState {
+  disconnected,
+  scanning,
+  connecting,
+  connected,
+  disconnecting,
+}
+```
+
+## BLE Connection Lifecycle
+
+1. **Scan** with known name prefixes (defined in `MeshCoreUuids.deviceNamePrefixes`):
+    - `MeshCore-`
+    - `Whisper-`
+    - `WisCore-`
+    - `Seeed`
+    - `Lilygo`
+    - `HT-`
+    - `LowMesh_MC_`
+2. **Connect** with 15-second timeout (6 seconds on Linux)
+3. **Request MTU** 185 bytes (non-web only)
+4. **Discover services** and locate NUS
+5. **Enable TX notifications** (up to 3 attempts on native)
+6. **Subscribe** to TX characteristic for incoming frames
+7. **Initial sync**: device info query, time sync, channel sync
+
+## Auto-Reconnect (BLE Only)
+
+On unexpected disconnection, auto-reconnect with exponential backoff:
+- Delays: 1s, 2s, 4s, 8s, 16s, 30s, 30s...
+- Resets on successful connection
+- Disabled for manual disconnects
+- Not available for USB or TCP
+
+## Protocol Constants
+
+| Constant | Value | Description |
+|---|---|---|
+| Max frame size | 172 bytes | BLE/USB/TCP payload limit |
+| Public key size | 32 bytes | Ed25519 public key |
+| Max path size | 64 bytes | Maximum path data |
+| Max name size | 32 bytes | Maximum node name |
+| Max text payload | 160 bytes | Firmware `MAX_TEXT_LEN` |
+| App protocol version | 4 | Sent in device query |
+| Contact frame size | 148 bytes | Fixed-size contact record |
+
+## Command Codes (App → Device)
+
+| Code | Name | Description |
+|------|------|-------------|
+| 1 | CMD_APP_START | Announce app connection |
+| 2 | CMD_SEND_TXT_MSG | Send direct text message |
+| 3 | CMD_SEND_CHANNEL_TXT_MSG | Send channel text message |
+| 4 | CMD_GET_CONTACTS | Request contact list |
+| 5 | CMD_GET_DEVICE_TIME | Query device clock |
+| 6 | CMD_SET_DEVICE_TIME | Set device clock |
+| 7 | CMD_SEND_SELF_ADVERT | Broadcast own advertisement |
+| 8 | CMD_SET_ADVERT_NAME | Set node name |
+| 9 | CMD_ADD_UPDATE_CONTACT | Add or update a contact |
+| 10 | CMD_SYNC_NEXT_MESSAGE | Request next queued message |
+| 11 | CMD_SET_RADIO_PARAMS | Set radio parameters |
+| 12 | CMD_SET_RADIO_TX_POWER | Set TX power |
+| 13 | CMD_RESET_PATH | Reset contact path |
+| 14 | CMD_SET_ADVERT_LATLON | Set advertised location |
+| 15 | CMD_REMOVE_CONTACT | Remove a contact |
+| 16 | CMD_SHARE_CONTACT | Share contact to mesh |
+| 17 | CMD_EXPORT_CONTACT | Export contact as bytes |
+| 18 | CMD_IMPORT_CONTACT | Import contact from bytes |
+| 19 | CMD_REBOOT | Reboot device |
+| 20 | CMD_GET_BATT_AND_STORAGE | Query battery and storage |
+| 22 | CMD_DEVICE_QUERY | Query device info |
+| 26 | CMD_SEND_LOGIN | Login to repeater/room |
+| 27 | CMD_SEND_STATUS_REQ | Request repeater status |
+| 30 | CMD_GET_CONTACT_BY_KEY | Get contact by public key |
+| 31 | CMD_GET_CHANNEL | Get channel definition |
+| 32 | CMD_SET_CHANNEL | Set channel name and PSK |
+| 36 | CMD_SEND_TRACE_PATH | Request path trace |
+| 38 | CMD_SET_OTHER_PARAMS | Set misc parameters |
+| 39 | CMD_GET_TELEMETRY_REQ | Request sensor telemetry |
+| 40 | CMD_GET_CUSTOM_VAR | Get custom variables |
+| 41 | CMD_SET_CUSTOM_VAR | Set a custom variable |
+| 50 | CMD_SEND_BINARY_REQ | Send binary request |
+| 57 | CMD_SEND_ANON_REQ | Send anonymous request |
+| 58 | CMD_SET_AUTO_ADD_CONFIG | Set auto-add configuration |
+| 59 | CMD_GET_AUTO_ADD_CONFIG | Get auto-add configuration |
+
+## Response / Push Codes (Device → App)
+
+| Code | Name | Description |
+|------|------|-------------|
+| 0 | RESP_CODE_OK | Generic success |
+| 1 | RESP_CODE_ERR | Generic error |
+| 2 | RESP_CODE_CONTACTS_START | Contact list begins |
+| 3 | RESP_CODE_CONTACT | Single contact data |
+| 4 | RESP_CODE_END_OF_CONTACTS | Contact list complete |
+| 5 | RESP_CODE_SELF_INFO | Device self-info response |
+| 6 | RESP_CODE_SENT | Message transmitted; carries `[1]=is_flood, [2–5]=ack_hash, [6–9]=estimated_timeout_ms` |
+| 7 | RESP_CODE_CONTACT_MSG_RECV | Incoming direct message (v2) |
+| 8 | RESP_CODE_CHANNEL_MSG_RECV | Incoming channel message (v2) |
+| 10 | RESP_CODE_NO_MORE_MESSAGES | No more queued messages |
+| 11 | RESP_CODE_EXPORT_CONTACT | Exported contact data |
+| 9 | RESP_CODE_CURR_TIME | Current device time |
+| 12 | RESP_CODE_BATT_AND_STORAGE | Battery mV (uint16 LE) + storage used/total (uint32 LE each) |
+| 13 | RESP_CODE_DEVICE_INFO | Firmware info |
+| 16 | RESP_CODE_CONTACT_MSG_RECV_V3 | Incoming direct message (v3) |
+| 17 | RESP_CODE_CHANNEL_MSG_RECV_V3 | Incoming channel message (v3) |
+| 18 | RESP_CODE_CHANNEL_INFO | Channel definition |
+| 21 | RESP_CODE_CUSTOM_VARS | Custom variables |
+| 25 | RESP_CODE_AUTO_ADD_CONFIG | Auto-add flags |
+| 0x80 | PUSH_CODE_ADVERT | Known contact re-seen |
+| 0x81 | PUSH_CODE_PATH_UPDATED | Better path found; carries the 32-byte public key of the updated contact |
+| 0x82 | PUSH_CODE_SEND_CONFIRMED | Delivery ACK from remote; carries ACK hash (4 bytes) + trip time (4 bytes) |
+| 0x83 | PUSH_CODE_MSG_WAITING | Offline messages queued |
+| 0x85 | PUSH_CODE_LOGIN_SUCCESS | Repeater/room login succeeded |
+| 0x86 | PUSH_CODE_LOGIN_FAIL | Repeater/room login failed |
+| 0x87 | PUSH_CODE_STATUS_RESPONSE | Repeater status response |
+| 0x88 | PUSH_CODE_LOG_RX_DATA | Radio RX data with SNR (int8, units 1/4 dB), RSSI, and raw radio packet |
+| 0x89 | PUSH_CODE_TRACE_DATA | Path trace result |
+| 0x8A | PUSH_CODE_NEW_ADVERT | New node discovered |
+| 0x8B | PUSH_CODE_TELEMETRY_RESPONSE | Sensor telemetry data |
+| 0x8C | PUSH_CODE_BINARY_RESPONSE | Binary data response |
+
+## Data Models
+
+### Contact
+32-byte public key (primary identity), name, type (chat/repeater/room/sensor), flags, path data, GPS coordinates, last-seen timestamp. Parsed from 148-byte firmware frames with this layout:
+
+```
+[0]     = resp_code
+[1–32]  = public key (32 bytes)
+[33]    = type (1=chat, 2=repeater, 3=room, 4=sensor)
+[34]    = flags (bit 0 = favorite)
+[35]    = path_length
+[36–99] = path (64 bytes)
+[100–131] = name (32 bytes, null-padded)
+[132–135] = timestamp (uint32 LE)
+[136–139] = latitude (int32 LE, × 1e-6 degrees)
+[140–143] = longitude (int32 LE, × 1e-6 degrees)
+[144–147] = last_modified (uint32 LE)
+```
+
+### Message (Direct)
+Sender key, text, timestamp, outgoing flag, status (pending/sent/delivered/failed), message ID (UUID), retry count, ACK hash, trip time, path data, reactions.
+
+### Channel Message
+Sender name, text, timestamp, status (pending/sent/failed), repeater hops, path variants, channel index, reactions, reply threading fields.
+
+### Channel
+Index (0–7), name, 16-byte PSK, unread count. PSK derivation methods for hashtag (SHA-256) and community (HMAC-SHA256) channels.
+
+### Community
+UUID, name, 32-byte secret, hashtag channel list. Shared via QR code.
+
+## Persistence
+
+All data is stored via `SharedPreferences` (JSON-serialized). No SQLite or other database.
+
+| Data | Storage Key Pattern | Scope |
+|---|---|---|
+| Contacts | `contacts<pubKey10>` | Per device identity |
+| Messages | `messages_<pubKey10><contactKey>` | Per device + contact |
+| Channel Messages | `channel_messages_<pubKey10><index>` | Per device + channel |
+| Channels | `channels<pubKey10>` | Per device identity |
+| Channel Order | `channel_order_<pubKey10>` | Per device identity |
+| Contact Groups | `contact_groups<pubKey10>` | Per device identity |
+| Communities | `communities_v1<pubKey10>` | Per device identity |
+| Unread Counts | `contact_unread_count<pubKey10>` | Per device identity |
+| Discovered Contacts | `discovered_contacts` | Global |
+| App Settings | `app_settings` | Global |
+| Path History | `path_history_<contactKey>` | Per contact |
+
+## Auto-Add Configuration Bitmask
+
+Used by `CMD_SET_AUTO_ADD_CONFIG` (58) and `RESP_CODE_AUTO_ADD_CONFIG` (25):
+
+| Bit | Flag | Description |
+|-----|------|-------------|
+| 0 | 0x01 | Overwrite oldest contact when list is full |
+| 1 | 0x02 | Auto-add chat users |
+| 2 | 0x04 | Auto-add repeaters |
+| 3 | 0x08 | Auto-add room servers |
+| 4 | 0x10 | Auto-add sensors |
+
+## Radio Packet Payload Types
+
+Seen inside `PUSH_CODE_LOG_RX_DATA` raw packets:
+
+| Code | Type |
+|------|------|
+| 0x00 | REQ (request) |
+| 0x01 | RESPONSE |
+| 0x02 | TXTMSG (text message) |
+| 0x03 | ACK |
+| 0x04 | ADVERT |
+| 0x05 | GRPTXT (group/channel text) |
+| 0x06 | GRPDATA (group data) |
+| 0x07 | ANONREQ (anonymous request) |
+| 0x08 | PATH |
+| 0x09 | TRACE |
+| 0x0A | MULTIPART |
+| 0x0B | CONTROL |
+| 0x0F | RAW_CUSTOM |
+
+## State Management
+
+Uses Flutter `Provider` with `ChangeNotifier`. The central state holder is `MeshCoreConnector`, which owns all in-memory collections and fires debounced (50ms) `notifyListeners()` to update the UI. In-memory conversations are windowed to 200 messages per contact; older messages remain on disk and are loaded on demand.
+
+### Data Flow
+
+1. Raw frames arrive over BLE/USB/TCP
+2. First byte is parsed as response/push code
+3. Appropriate model factory (`fromFrame()`) parses the data
+4. In-memory collections are updated
+5. Storage stores are persisted (async)
+6. `notifyListeners()` triggers UI rebuilds
+7. Screens read current state via getters

documentation/channels.md

@@ -0,0 +1,155 @@
+# Channels
+
+## Overview
+
+Channels are broadcast group-chat spaces secured by a 16-byte pre-shared key (PSK). Any device with the same channel index and PSK will receive and decrypt channel messages. Unlike direct messages, channel messages are broadcast to the entire mesh.
+
+Up to 8 channels (indices 0–7) can be active simultaneously on one device.
+
+## How to Access
+
+QuickSwitchBar tab 1 (middle) from any main screen.
+
+## Channel Types
+
+| Type | Icon | Color | Description |
+|---|---|---|---|
+| Public | Globe | Green | Fixed well-known PSK; any device can join |
+| Hashtag | Hash tag | Blue | PSK derived from the hashtag name via SHA-256; discoverable by convention |
+| Private | Lock | Blue | Random PSK; requires out-of-band sharing of the 32-hex key |
+| Community | Groups/Tag | Purple | PSK derived via HMAC-SHA256 from a community's shared secret |
+
+## Channels List Screen
+
+### What the User Sees
+
+- **Search bar** with live text filtering (300ms debounce)
+- **Sort/filter button**
+- **Scrollable list of channel cards**, each showing:
+  - Type icon with color coding (purple badge overlay for community channels)
+  - Channel name (or "Channel N" if unnamed)
+  - Unread badge (if messages are unread)
+  - Drag handle (when manual sort is active)
+- **"+" FAB** to add a new channel
+- **Overflow menu**: Disconnect, Manage Communities (only shown when at least one community exists), Settings
+
+If no channels exist, an empty state with an "Add Public Channel" shortcut is shown. If a search produces no results, a separate "no results" empty state with a search-off icon is shown.
+
+Pull-to-refresh (swipe down) forces a re-fetch of channels from the device firmware.
+
+### Sorting Options
+
+- **Manual** (default): Drag-and-drop reordering, persisted (drag handles are hidden when a search query is active)
+- **A–Z**: Alphabetical
+- **Latest messages**: Most recent first
+- **Unread**: Most unread first
+
+## Adding a Channel
+
+Tap the "+" FAB to open a dialog with six options:
+
+1. **Create Private Channel** — Enter a name (max 31 characters); a random PSK is generated
+2. **Join Private Channel** — Enter a name and a 32-hex PSK (non-hex characters like spaces and dashes are silently stripped, so pasted keys with formatting are accepted)
+3. **Join Public Channel** — One tap; uses the well-known public PSK (only shown if no public channel exists)
+4. **Join Hashtag Channel** — Enter a hashtag name; PSK is derived from the name. If communities exist, choose between regular hashtag (SHA-256) or community hashtag (HMAC)
+5. **Scan Community QR** — Opens QR scanner to join a community
+6. **Create Community** — Enter a name; generates a random 32-byte secret; optionally adds a community public channel; shows QR code for sharing
+
+## Channel Actions (Long-Press / Right-Click)
+
+| Action | Description |
+|---|---|
+| Edit | Change name, PSK (with a dice icon to generate a random PSK), or SMAZ compression toggle (compresses outgoing messages to allow longer text within the byte limit) |
+| Mute / Unmute | Toggle push notification suppression for this channel |
+| Delete | Remove the channel from the device (confirmation required) |
+
+## Channel Chat
+
+Tap a channel card to open the channel chat screen.
+
+### App Bar
+
+- Type icon: globe for public channels, tag (#) for all other channel types
+- Channel name
+- Subtitle: "{Public|Private} • {N} unread" (e.g., "Public • 3 unread")
+
+### Message Display
+
+- Reverse-scrolling list (newest at bottom)
+- **Incoming messages**: Colored avatar with sender's initial (or first emoji if name starts with one; color is deterministic from sender name hash), sender name in primary color, message bubble
+- **Outgoing messages**: Primary container color bubble with a small status icon: pending (clock), sent (checkmark), or failed (red error circle)
+- Automatic older-message loading on scroll-to-top
+- Jump-to-bottom button when scrolled up
+- **Pinch-to-zoom**: Two-finger zoom (0.8x–1.8x) and double-tap to reset text size
+- **Message tracing mode** (when enabled in App Settings): Each bubble additionally shows path prefix bytes (`via XX,YY,...`), a timestamp, and a repeat count icon
+
+### Message Types in Chat
+
+- **Plain text** with linkified URLs
+- **GIFs** (`g:{gifId}`) rendered inline via Giphy CDN
+- **Location pins** (`m:{lat},{lon}|{label}|`) shown as tappable location cards
+- **Reactions** displayed as emoji pills below target messages
+
+### Replies (Channel Chat Only)
+
+- **Mobile**: Swipe an **incoming** message left to trigger reply (with haptic feedback). You cannot swipe your own outgoing messages. Swipe reply is not available on desktop.
+- **All platforms**: Long-press → "Reply"
+- Reply banner appears above the input bar with the quoted message (tap X to cancel)
+- Sent replies are prefixed `@[{senderName}] {text}`
+- Received replies show a bordered quote block inside the bubble; tapping scrolls to the original. Reply previews render GIF thumbnails and location pin icons, not just text.
+
+### Message Path Viewing
+
+- **Mobile**: Tap a message bubble to view its routing path
+- **Desktop**: Long-press/right-click → "Path" (tapping the bubble does nothing on desktop)
+- Opens the Channel Message Path Screen (see [Additional Features](additional-features.md))
+
+### Context Actions (Long-Press / Right-Click)
+
+| Action | Availability | Description |
+|---|---|---|
+| Reply | All messages | Triggers reply mode |
+| Path | Desktop only | Opens message path view |
+| Add Reaction | Incoming messages only | Opens emoji picker (cannot react to your own messages) |
+| Copy | All messages | Copies text to clipboard |
+| Mark as Unread | Incoming messages only | Marks this message and all subsequent incoming messages as unread |
+| Delete | All messages | Removes locally (not from mesh) |
+
+## Communities
+
+Communities are a layer above channels that provide a private namespace.
+
+### What is a Community?
+
+A community has a name and a 32-byte random secret. Channel PSKs are derived from this secret:
+- **Public channel**: `HMAC-SHA256(secret, "channel:v1:__public__")[:16]`
+- **Hashtag channel**: `HMAC-SHA256(secret, "channel:v1:{hashtag}")[:16]`
+
+Outsiders who don't know the secret cannot discover or join community channels.
+
+### Sharing a Community
+
+Communities are shared via QR codes containing a JSON payload:
+```json
+{"v": 1, "type": "meshcore_community", "name": "...", "k": "<base64url-secret>"}
+```
+
+### Managing Communities
+
+From the channels screen overflow menu → "Manage Communities". Opens a draggable scrollable sheet (resizable 30–90% of screen height):
+
+- Each community shows its name and a short community ID (first 8 hex characters)
+- **Tap a community** to directly show its QR code for sharing
+- **Popup menu** per community:
+  - **Show QR** — displays the QR code for sharing with new members
+  - **Delete** — removes the community locally and deletes all associated device channels (confirmation dialog warns how many channels will be removed)
+
+## How Channels Differ from Direct Messages
+
+| Aspect | Channels | Direct Messages |
+|---|---|---|
+| Addressing | Broadcast to all nodes with matching PSK | Point-to-point to a specific contact |
+| Encryption | Shared PSK (symmetric) | Contact's public key (asymmetric) |
+| Sender identity | Plain text prefix in payload | Verified via public key |
+| Replies | Supported (swipe or long-press) | Not supported |
+| Retry mechanism | No automatic retry | Exponential backoff with path rotation |

documentation/chat-and-messaging.md

@@ -0,0 +1,122 @@
+# Chat & Messaging
+
+## Overview
+
+The app supports two chat modes:
+- **Direct messages**: Encrypted point-to-point messages to individual contacts
+- **Channel messages**: Broadcast messages to shared channels (see [Channels](channels.md))
+
+This page covers direct messaging. For channel chat, see the Channels documentation.
+
+## How to Access
+
+From the Contacts screen, tap any Chat-type contact to open the ChatScreen.
+
+## Chat Screen Layout
+
+### App Bar
+
+- **Title**: Contact name
+- **Subtitle**: Current routing path label (e.g., "2 hops", "flood (auto)", "direct (forced)") and unread count. Tapping the subtitle shows the full path details.
+- **Action buttons**:
+  - **Routing mode** (waves icon): Switch between Auto, Direct, and Flood routing
+  - **Path management** (timeline icon): View recent paths with hop count, round-trip time, age, and success count. Paths are color-coded by direct repeater (green/yellow/red/blue for ranked repeaters, grey for unknown). Tap a path to activate it (the device verifies and confirms via snackbar), long-press to view full path details, set custom paths, or force flood mode. A warning banner appears when history reaches 100 entries.
+  - **Info** (info icon): Contact info dialog showing type, path, GPS coordinates, public key, and SMAZ compression toggle
+
+### Message List
+
+- Scrollable list with newest messages at the bottom
+- **Outgoing messages**: Right-aligned, primary color background. **Failed messages** change to a red-toned error container background
+- **Incoming messages**: Left-aligned, grey background with a colored avatar (initial letter or first emoji of sender name; color is deterministic from a hash of the sender name)
+- Bubble width capped at 65% of screen width
+- Hyperlinks rendered as tappable green underlined text
+- **Pinch-to-zoom**: Two-finger zoom (0.8x–1.8x) and double-tap to reset
+- **Jump to bottom**: Floating button appears when scrolled away from the bottom
+- **Lazy loading**: Scrolling to top loads older messages from storage
+
+### Input Bar
+
+- **GIF button** (left): Opens GIF picker bottom sheet
+- **Translation button** (optional, between GIF and text field): Shown only when translation is enabled in App Settings. Tap to configure outgoing-message translation language and on/off toggle.
+- **Text field** (center): Auto-capitalization, enforces UTF-8 byte limit in real-time
+- **Send button** (right): Submits the message
+- On desktop: Enter/Numpad Enter also submits
+- When a GIF is selected, the text field shows an inline GIF preview with a dismiss button
+
+## Message Types
+
+| Type | Wire Format | Display |
+|---|---|---|
+| Plain text | Raw UTF-8 string | Inline text with link detection |
+| GIF | `g:<giphy-id>` | Inline GIF image from Giphy CDN |
+| Location pin | `m:<lat>,<lon>\|<label>\|...` | Location icon + label; tap to open map |
+| Reaction | `r:<hash>:<emoji-index>` | Applied to target message as emoji pill |
+
+## Message Status
+
+Outgoing messages display a status indicator:
+
+| Status | Icon | Meaning |
+|---|---|---|
+| Pending | Grey double-check | Queued, waiting for device to transmit (visually identical to Sent) |
+| Sent | Grey double-check | Device confirmed transmission (visually identical to Pending) |
+| Delivered | Green double-check | Remote node acknowledged receipt |
+| Failed | Red X | All retries exhausted |
+
+### Message Tracing Mode
+
+When enabled in App Settings, additional metadata appears inside each bubble:
+- Timestamp (HH:MM)
+- Retry count (e.g., "Retry 2 of 4") — only shown for outgoing messages where at least one retry has occurred
+- Status icon (outgoing only)
+- Round-trip time in seconds (if delivered)
+
+## Message Length Limits
+
+- **Direct messages**: 156 bytes (UTF-8) — enforced in real-time by the input formatter
+- **Channel messages**: 160 minus sender name length minus 2 bytes for the `"<name>: "` prefix
+- Over-length paste shows a snackbar error
+
+## Send Queue
+
+Only one message per contact can be in-flight at a time (to avoid overflowing the firmware's 8-entry ACK table). If you send multiple messages rapidly, they are queued and sent sequentially — each waits for the previous one to be delivered, fail, or exhaust retries before transmitting.
+
+## Retry Mechanism
+
+When a direct message is sent:
+
+1. The app computes an expected ACK hash: `SHA256([timestamp][attempt][text][selfPubKey])[0:4]` — matching the firmware's hash calculation. If SMAZ compression is enabled, the compressed text (not the original) is hashed
+2. On device acknowledgment (`RESP_CODE_SENT`), the message transitions to "sent" and a timeout timer starts
+3. **Timeout duration**: Preferably from the ML timeout prediction service; otherwise calculated from LoRa airtime physics: `500 + (airtime × 6 + 250) × (pathLength + 1)` ms for direct paths, `500 + 16 × airtime` ms for flood (airtime is estimated from the radio's current spreading factor, bandwidth, and coding rate)
+4. On timeout, the message is retried with **exponential backoff**: `1000 × 2^retryCount` ms (1s, 2s, 4s, 8s, 16s...)
+5. **Max retries**: Configurable (default 5, range 2–10)
+6. After max retries, the message is marked "failed" — but a **30-second grace window** remains during which a late ACK can still resolve the message to "delivered"
+7. If **Clear Path on Max Retry** is enabled (App Settings), the contact's stored routing path is automatically cleared when max retries are exhausted
+8. **Auto route rotation**: When enabled (and no manual path override is set), the retry service uses a diversity window to avoid re-using recently tried paths, cycling through known routes on each attempt
+
+### Manual Retry
+
+Long-press a failed message → "Retry" to re-send using the current routing settings.
+
+## Reactions
+
+Add emoji reactions to incoming messages (not your own):
+
+1. Long-press (or right-click on desktop) a message
+2. Select "Add reaction" from the context menu
+3. Choose from quick emojis (thumbs up, heart, laugh, party, clap, fire) or browse the full emoji picker
+4. Reactions appear as pills below the message bubble with emoji and count
+5. Pending reactions show at 50% opacity with a spinner
+6. Failed reactions show a red retry icon (tap to retry)
+
+## Context Actions (Long-Press / Right-Click)
+
+| Action | Availability | Description |
+|---|---|---|
+| Add reaction | Incoming messages only | Opens emoji picker |
+| View path | Mobile: tap bubble directly; Desktop: long-press/right-click menu | Shows message routing path |
+| Copy | All messages | Copies text to clipboard |
+| Mark as Unread | Incoming messages only | Marks this message and all subsequent incoming messages as unread |
+| Delete | All messages | Removes locally (not from mesh) |
+| Retry | Failed outgoing messages | Re-sends the message |
+| Open chat with sender | Room server chats | Opens 1:1 chat with the message sender |

documentation/contacts.md

@@ -0,0 +1,119 @@
+# Contacts
+
+## Overview
+
+The Contacts screen is the primary hub for managing mesh nodes your radio has a relationship with. A "contact" is any node whose cryptographic advertisement has been received — it can be a chat user, repeater, room server, or sensor.
+
+## How to Access
+
+- Automatically shown after connecting to a device
+- QuickSwitchBar tab 0 (leftmost) from Channels or Map screens
+- Back navigation from Chat or Settings screens
+
+## Contact Types
+
+| Type | Avatar Color | Icon | Description |
+|---|---|---|---|
+| Chat | Blue | Chat bubble | Another user's mesh radio |
+| Repeater | Orange | Cell tower | A mesh repeater/relay node |
+| Room | Purple | Group | A room server for group chat |
+| Sensor | Green | Sensors | A sensor device |
+
+## Contact List
+
+Each contact is displayed as a list tile showing:
+
+- **Avatar**: Color-coded circle with type icon (or first emoji of the contact's name if it starts with one)
+- **Name**: Contact name (single line)
+- **Path label**: "Direct", "N hops", or "Flood" (with forced variants if a path override is active)
+- **Public key**: Shortened hex format `<XXXXXXXX...XXXXXXXX>`
+- **Unread badge**: Red pill with count (if unread messages exist)
+- **Last seen**: Relative timestamp ("Now", "5 mins ago", "2 hours ago", "3 days ago"). For chat contacts, this shows whichever is more recent: the last advertisement time or the last message time
+- **Favorite star**: Amber star icon if favorited
+- **Location pin**: Grey pin icon if the contact has GPS coordinates
+
+Pull-to-refresh re-fetches the full contact list from the device.
+
+## Search and Filter
+
+A toolbar at the top provides:
+
+**Search**: Matches contact name (case-insensitive) or public key hex prefix. Debounced at 300ms.
+
+**Sort options**:
+- Latest Messages (by most recent message)
+- Heard Recently (by last seen / last message)
+- A–Z (alphabetical)
+
+**Filter options**:
+- All, Favorites, Users, Repeaters, Room Servers, Unread Only
+
+## Contact Groups
+
+Groups are a client-side organizational feature for grouping contacts.
+
+- **Create a group**: Tap the group dropdown → "+" icon → enter name → select members → Save
+- **Edit a group**: Group dropdown → pencil icon next to the group
+- **Delete a group**: Group dropdown → trash icon next to the group
+- **Filter by group**: Select a group from the dropdown to show only its members
+
+Groups are stored per radio identity (scoped by public key).
+
+**Validation rules**: Group names cannot be empty, cannot be "all" (reserved, case-insensitive), and must be unique (case-insensitive). The group creation dialog includes a built-in search field to filter contacts when selecting members. Creating a new group automatically selects it as the active filter.
+
+## Tap Actions
+
+| Contact Type | Action on Tap |
+|---|---|
+| Chat / Sensor | Opens ChatScreen for direct messaging |
+| Repeater | Shows password login dialog → opens RepeaterHubScreen |
+| Room | Shows password login dialog → opens ChatScreen for room chat |
+
+## Long-Press / Right-Click Menu
+
+| Action | Availability | Description |
+|---|---|---|
+| Ping | Repeaters (always) | Opens PathTraceMapScreen targeting the repeater |
+| Path Trace | Rooms (always); Chat/Sensor if `pathLength > 0` | Opens PathTraceMapScreen. For rooms, label shows "Ping" when no path bytes are known, "Path Trace" when path bytes are available |
+| Manage Repeater | Repeaters only | Login dialog → RepeaterHubScreen |
+| Room Login | Rooms only | Login dialog → ChatScreen |
+| Room Management | Rooms only | Login dialog → RepeaterHubScreen (management mode) |
+| Open Chat | Chat/Sensor | Same as single tap |
+| Add/Remove Favorite | All types | Toggles the favorite flag |
+| Share Contact | All types | Copies `meshcore://<hex>` URI to clipboard |
+| Share Contact Zero-Hop | All types | Broadcasts the contact's advertisement one hop |
+| Delete Contact | All types | Confirmation dialog → removes from device and clears messages |
+
+## App Bar Menus
+
+The Contacts screen has **two separate popup menus** in the app bar:
+
+**Antenna icon menu** (contact sharing):
+- Zero-Hop Advert — broadcasts your advertisement to immediately adjacent nodes
+- Flood Advert — broadcasts across the full mesh network
+- Copy Advert to Clipboard — copies your `meshcore://<hex>` URI for sharing externally
+- Add Contact from Clipboard — reads a `meshcore://<hex>` URI from clipboard and imports it
+
+**Three-dot overflow menu**:
+- Disconnect — disconnects from the device
+- Discovered Contacts — opens the DiscoveryScreen
+- Settings — opens the Settings screen
+
+## Adding Contacts
+
+### Automatic (Passive)
+When the radio hears an advertisement, the contact appears automatically if auto-add is enabled for that type (configurable in Settings → Contact Settings).
+
+### Import from Clipboard
+Antenna menu → "Add Contact from Clipboard". Reads a `meshcore://<hex>` URI from clipboard and imports it to the device.
+
+### Import from Discovered Contacts
+Overflow menu → "Discovered Contacts". Shows nodes heard passively that haven't been added yet. Tap to immediately import (no confirmation dialog), or long-press for more options (Add, Copy URI, Delete). The Discovery screen has its own search bar, type filters (Users, Repeaters, Rooms, Favorites), and sort options (Last Seen, A-Z). An overflow "Delete All" option clears all discovered contacts.
+
+## Contact Sharing Format
+
+Contacts are shared using the `meshcore://` URI scheme:
+```
+meshcore://<hex-encoded-advertisement-packet>
+```
+This contains the node's public key and metadata. Paste it into another MeshCore app to import.

documentation/map-and-location.md

@@ -0,0 +1,186 @@
+# Map & Location
+
+## Overview
+
+The Map feature is a full-featured node-location visualization and radio-planning tool built on OpenStreetMap tiles. It is one of the three primary views accessible from the QuickSwitchBar.
+
+## How to Access
+
+- **QuickSwitchBar tab 2** (rightmost) from Contacts or Channels
+- **Deep-link from a chat message**: Tapping a shared location pin in a chat opens the map centered on that pin
+- **Settings → Offline Map Cache**: Opens the tile cache management screen
+
+## What the Map Displays
+
+### Self Location (Teal Circle)
+Your own node's position, obtained from the device firmware. Displayed as a teal `person_pin_circle` icon. Only appears if the device has GPS data or a manually-set location.
+
+### Contact / Node Markers (Color-Coded)
+All contacts with known GPS coordinates are plotted:
+
+| Type | Color | Icon |
+|---|---|---|
+| Chat user | Blue | Person |
+| Repeater | Green | Router |
+| Room | Purple | Meeting room |
+| Sensor | Orange | Sensors |
+
+Node name labels appear automatically at zoom level 14 and above.
+
+### Shared Map Pins (Flag Icons)
+Location pins shared in chat messages are displayed as flags:
+- **Blue flag**: From a direct message
+- **Purple flag**: From a private channel
+- **Orange flag**: From a public channel
+
+Tap a pin to see its info. Options to "Hide" (session only) or "Remove" (persistent).
+
+### Predicted / Guessed Locations (Semi-Transparent)
+
+Many contacts on the mesh don't have GPS hardware, so the map has no explicit coordinates for them. Instead of leaving these contacts invisible, the app **infers an approximate position** by analyzing the repeater path the contact's messages travel through. These inferred positions are displayed as semi-transparent markers with a `not_listed_location` icon, visually distinct from confirmed-location markers.
+
+#### Why guessed locations exist
+
+In a mesh network, every message hops through one or more repeaters on its way to the destination. Each repeater in the path is identified by the first byte of its public key. If any of those repeaters have a known GPS location (because they advertise it), then a contact that routes through those repeaters must be somewhere within radio range of them. By combining the positions of multiple repeaters a contact is known to use, the app can triangulate a rough area where the contact is likely located.
+
+#### How the algorithm works
+
+1. **Build a repeater index**: The app collects all known contacts of type Repeater that have a valid GPS position and indexes them by the first byte of their public key.
+
+2. **Collect anchor points**: For each contact that lacks GPS, the app looks at the **last-hop byte** of the contact's current path and also searches the `PathHistoryService` for recent paths. Each last-hop byte that matches a located repeater becomes an "anchor point" — a GPS coordinate the contact is likely near.
+
+3. **Resolve ambiguity**: If multiple repeaters share the same first public-key byte (a hash collision), that byte is discarded as ambiguous. Only unambiguous one-to-one matches are kept.
+
+4. **Filter geometric inconsistencies**: Two anchor points separated by more than `2 × maxRangeKm` (the estimated LoRa radio range, computed from the current frequency, bandwidth, spreading factor, and TX power using a free-space path loss model) cannot both be in range of the same node. Outlier anchors are removed to keep only a geometrically consistent set.
+
+5. **Compute the estimated position**:
+   - **Single anchor**: The contact is placed on a small circle (330m radius) around the repeater. The angle on the circle is deterministic — derived from an FNV-1a hash of the contact's public key — so the same contact always appears at the same offset, preventing markers from stacking on top of each other.
+   - **Two or more anchors**: The position is the average (centroid) of all anchor coordinates, with a smaller offset radius (80–120m) applied for visual separation.
+
+6. **Assign confidence level**:
+   - **High confidence** (2+ anchors): Displayed at 55% opacity.
+   - **Low confidence** (1 anchor): Displayed at 30% opacity.
+
+7. **Cache the result**: The computation is cached using a key derived from the contact's paths, anchor positions, path-history version, and radio parameters. The cache is only invalidated when any of these inputs change, avoiding recomputation on every UI rebuild.
+
+#### How to read guessed locations on the map
+
+- **Semi-transparent marker** with a `not_listed_location` icon: This is a guessed position, not a confirmed GPS fix.
+- **More opaque** (55%): Higher confidence — the contact was seen through 2 or more repeaters with known positions.
+- **More transparent** (30%): Lower confidence — based on a single repeater anchor only.
+- Coordinates shown in the marker info dialog are prefixed with `~` to indicate they are estimated.
+- Guessed locations can be toggled on/off in the map filter dialog (FAB → "Guessed locations" toggle).
+
+## Map Interactions
+
+### Zoom and Pan
+Standard pinch-to-zoom (range 2–18). Initial camera position is calculated from the statistical spread of all plotted points.
+
+### Tap on a Node Marker
+Opens a dialog showing: type, path (hop chain), coordinates, last-seen time, and public key. Action buttons vary by type:
+- **Chat nodes**: "Open Chat"
+- **Repeaters**: "Manage Repeater"
+- **Rooms**: "Join Room"
+
+### Long-Press on Empty Map Area
+Shows a bottom sheet with:
+- **Share marker here**: Prompts for a label, then pick a DM contact or channel to send the location to. Wire format: `m:<lat>,<lon>|<label>|poi`
+- **Set as my location**: Updates your device's advertised location
+
+### Filter Dialog (FAB)
+Toggle visibility of: chat nodes, repeaters, other nodes, guessed locations, discovery contacts, overlapping markers (stacked markers at similar coordinates), and shared map pins (flag markers).
+Additional filters:
+- **Key prefix filter**: Show only contacts whose public key starts with a given prefix
+- **Last-seen time slider**: Exponential scale from near-zero to 6 months, with "all time" at the top end
+
+### Legend Card (Top-Right)
+Shows node count and pin count. Tappable to expand a legend of all marker types.
+
+---
+
+## Path Trace Map
+
+### How to Access
+- From the main map's radar icon
+- From a contact's long-press menu → "Path Trace / Ping"
+- From a message's path view → radar icon
+
+### What the User Sees
+A map with a polyline showing the route from your node through repeater hops to the target:
+- **Green circles**: Hops with known GPS coordinates
+- **Orange circles** (`~HH`): Inferred positions (no GPS but deducible from contacts)
+- **Red endpoint**: Target contact with known GPS
+- **Purple semi-transparent endpoint**: Target with guessed position
+
+A legend card at the bottom lists each hop pair with SNR quality icons and total path distance.
+
+### How It Works
+Sends a trace request frame over the mesh. The repeater network traces the path hop-by-hop and returns per-hop SNR data. For hops without GPS, positions are inferred by averaging GPS coordinates of contacts sharing that last-hop byte.
+
+---
+
+## Line-of-Sight (LOS) Analysis
+
+### How to Access
+From the main map, tap the terrain/antenna icon.
+
+### What the User Sees
+A full-screen map with a collapsible control panel containing:
+- **Elevation profile chart**: Terrain fill (green), LOS beam line (white), radio horizon line (yellow)
+- **Status**: Clear (green) or blocked (red) with distance and minimum clearance
+- **Options panel**: Node toggles, endpoint dropdowns, antenna height sliders (0–400 ft), Run LOS button
+
+### Key Interactions
+- **Long-press the map** to add custom endpoints (orange pushpin markers, renameable/deleteable)
+- **Tap a marker** to select it as Point A or B; LOS runs automatically when both are set
+- **Antenna heights** are adjustable for both endpoints
+- **Map line** between endpoints is colored green (clear) or red (blocked)
+- Terrain elevation is fetched from the Open-Meteo API (21–81 sample points, cached 24 hours)
+- K-factor is adjusted per radio frequency from a baseline of 4/3 at 915 MHz
+
+---
+
+## Offline Map Cache
+
+### How to Access
+Settings → App Settings → Map Display → Offline Map Cache
+
+### What the User Sees
+- Map with a blue polygon overlay showing previously selected cache bounds
+- Bounding box coordinates card
+- **Cache Area** controls: "Use Current View" and Clear buttons
+- **Zoom Range** slider (3–18) with estimated tile count
+- **Download progress** bar (when downloading)
+- **Download Tiles** and **Clear Cache** buttons
+
+### Key Interactions
+1. Pan/zoom the map to the desired area
+2. Tap "Use Current View" to capture the viewport as cache bounds
+3. Adjust the zoom range slider
+4. Tap "Download Tiles" (confirmation dialog shows estimated count)
+5. Tiles are downloaded with up to 8 concurrent connections
+6. Once cached, tiles are served from disk without internet (365-day stale period)
+
+---
+
+## GPX Export
+
+### How to Access
+Settings → Export section
+
+### What It Does
+Exports contacts with GPS coordinates to a `.gpx` file via the OS share sheet. Three export options:
+- **Export Repeaters**: Repeater and Room contacts with locations
+- **Export Contacts**: Chat contacts with locations
+- **Export All**: All contacts with locations
+
+Each waypoint includes: name, lat/lon, type label, and public key hex.
+
+---
+
+## Location Data Sources
+
+The phone's own GPS is **never used**. All location data comes from the mesh:
+
+1. **Device self-location**: Read from firmware device-info response. Set manually in Settings → Location, or updated automatically if the device has a GPS module.
+2. **Remote node locations**: Extracted from advertisement packets received over the mesh. Encoded as integer lat/lon × 1,000,000.

documentation/navigation.md

@@ -0,0 +1,72 @@
+# Navigation
+
+## App Flow
+
+The app follows this general flow:
+
+```
+Launch → Scanner Screen → [Connect via BLE/USB/TCP] → Contacts Screen
+```
+
+After connecting, the three main screens (Contacts, Channels, Map) are accessible via a persistent bottom navigation bar called the **QuickSwitchBar**.
+
+## Quick Switch Bar
+
+The QuickSwitchBar is a Material 3 `NavigationBar` with a frosted-glass visual treatment (blur backdrop, transparent theme, rounded corners). It appears at the bottom of all three main screens.
+
+| Index | Icon | Label | Screen |
+|---|---|---|---|
+| 0 | People | Contacts | ContactsScreen |
+| 1 | Tag | Channels | ChannelsScreen |
+| 2 | Map | Map | MapScreen |
+
+Tapping a tab replaces the current screen with a subtle fade + slight horizontal nudge transition (220ms forward, 200ms reverse). The back button is suppressed on all three main screens — navigation between them is flat, not stacked. All icons use outline variants (`people_outline`, `tag`, `map_outlined`) following Material 3 conventions.
+
+## Disconnection
+
+- The disconnect button (available in the Settings screen and other main screens) shows a confirmation dialog before disconnecting
+- If the device disconnects unexpectedly, the app automatically navigates back to the Scanner screen (fires after the current frame completes via a post-frame callback)
+- This auto-navigation behavior (`DisconnectNavigationMixin`) is shared across all main screens
+
+## Theme and Locale
+
+- **Theme mode** is user-configurable in App Settings (System / Light / Dark) — not locked to system
+- **Language** can be overridden to one of 18 supported languages, or follow the system locale
+- On web, if a non-Chromium browser is detected, the app shows a `ChromeRequiredScreen` instead of the Scanner (Web Bluetooth requires Chromium)
+
+## Full Navigation Graph
+
+```
+ScannerScreen (root, always on stack)
+  ├─ [BLE connect] → push → ContactsScreen
+  ├─ [TCP FAB] → push → TcpScreen
+  │     └─ [TCP connected] → pushReplacement → ContactsScreen
+  └─ [USB FAB] → push → UsbScreen
+        └─ [USB connected] → pushReplacement → ContactsScreen
+
+ContactsScreen (selected=0)
+  ├─ [quick-switch 1] → pushReplacement → ChannelsScreen
+  ├─ [quick-switch 2] → pushReplacement → MapScreen
+  ├─ [tap contact] → push → ChatScreen
+  ├─ [overflow > Settings] → push → SettingsScreen
+  └─ [overflow > Discovered] → push → DiscoveryScreen
+
+ChannelsScreen (selected=1)
+  ├─ [quick-switch 0] → pushReplacement → ContactsScreen
+  ├─ [quick-switch 2] → pushReplacement → MapScreen
+  ├─ [tap channel] → push → ChannelChatScreen
+  └─ [overflow > Settings] → push → SettingsScreen
+
+MapScreen (selected=2)
+  ├─ [quick-switch 0] → pushReplacement → ContactsScreen
+  ├─ [quick-switch 1] → pushReplacement → ChannelsScreen
+  ├─ [radar button] → push → PathTraceMapScreen
+  ├─ [terrain button] → push → LineOfSightMapScreen
+  └─ [long-press] → share marker / set location
+
+Settings (push from any main screen)
+  └─ [App Settings] → push → AppSettingsScreen
+        └─ [Offline Map Cache] → push → MapCacheScreen
+```
+
+Any disconnection from any screen triggers `popUntil(route.isFirst)`, returning to the Scanner.

documentation/notifications.md

@@ -0,0 +1,92 @@
+# Notifications
+
+## Overview
+
+MeshCore Open provides both **system notifications** (push-style OS alerts) and **in-app unread badges** to inform users of new activity.
+
+## Notification Types
+
+### 1. Direct Message Notifications
+- **Triggered when**: A new incoming message arrives from a Chat or Room contact
+- **Title**: Contact's name
+- **Body**: Message text (reactions show "Reacted [emoji]", GIFs show "Sent a GIF")
+- **Priority**: High
+- **Android channel**: `messages`
+
+### 2. Channel Message Notifications
+- **Triggered when**: A new message arrives on a non-muted channel
+- **Title**: Channel name (or "Channel N" if unnamed)
+- **Body**: `"<senderName>: <message text>"`
+- **Priority**: High
+- **Android channel**: `channel_messages`
+
+### 3. Advertisement Notifications
+- **Triggered when**: A new node is discovered on the mesh for the first time
+- **Title**: "New [type] discovered" (e.g., "New chat node discovered")
+- **Body**: Contact's name
+- **Priority**: Default
+- **Android channel**: `adverts`
+
+### 4. Background Service Notification (Android Only)
+- A persistent low-priority notification: "MeshCore running — Keeping BLE connected"
+- Required by Android for foreground services to keep BLE alive in the background
+- Tap to re-launch the app
+- **Does not auto-start on reboot** — the user must re-open the app manually after a phone restart
+
+### Notification Tap Behavior
+
+Tapping a notification currently re-launches the app at the root route. It does **not** navigate directly to the relevant chat or channel.
+
+## In-App Unread Badges
+
+Red numeric badges appear throughout the UI:
+- **Contacts list**: Each contact row shows a red pill badge (e.g., "3") for unread messages
+- **Channels list**: Each channel row shows an unread badge
+- **Chat screen subtitle**: Shows unread count inline
+- Badges cap at "99+" for display
+
+### How Unread Counts Work
+
+- Stored per contact (by public key) and per channel, **scoped to the connected device's identity** (first 10 hex characters of its public key). Switching between different radios gives each its own independent unread state
+- **Suppressed when viewing**: Opening a chat resets the count to 0 and cancels the OS notification
+- **Ignored for**: Outgoing messages, CLI messages, and repeater contacts
+- Debounced writes (500ms) to avoid excessive storage I/O during message bursts
+
+## Notification Settings
+
+Access via **App Settings → Notifications**:
+
+| Setting | Default | Description |
+|---|---|---|
+| Enable Notifications | On | Master toggle; requests OS permission when turned on |
+| Message Notifications | On | DM alerts (greyed out if master is off) |
+| Channel Message Notifications | On | Channel alerts (greyed out if master is off) |
+| Advertisement Notifications | On | New node alerts (greyed out if master is off) |
+
+### Per-Channel Muting
+
+Long-press a channel in the channels list → "Mute channel" / "Unmute channel". Muted channels do not generate OS notifications.
+
+There is no per-contact muting.
+
+## Rate Limiting
+
+The notification system prevents notification storms:
+- **Minimum interval**: 3 seconds between individual notifications
+- **Batch window**: If multiple notifications arrive within 5 seconds, they are combined into a single summary notification on a fourth Android channel (`batch_summary`). The title is "MeshCore Activity" and the body lists the grouped counts (e.g., "2 messages, 1 channel message, 3 new nodes"). Batch summaries are Android-only; queued notifications that overflow the batch window are silently dropped on other platforms
+
+## Notification Clearing
+
+- **Opening a contact chat**: Cancels the OS notification and resets unread count
+- **Opening a channel**: Cancels the channel notification and resets unread count
+- **Opening Contacts screen**: Cancels all advertisement notifications
+
+## Platform Support
+
+| Platform | Message Notifs | Badge | Background Service |
+|---|---|---|---|
+| Android | Yes | Via notification number | Yes (foreground service) |
+| iOS | Yes | Yes (app badge) | No |
+| macOS | Yes | Yes | No |
+| Windows | Yes | No | No |
+| Linux | Yes (if D-Bus available) | No | No |

documentation/repeater-management.md

@@ -0,0 +1,219 @@
+# Repeater Management
+
+## Overview
+
+Repeater Management provides tools for administering MeshCore repeater and room server nodes. It includes device status monitoring, CLI access, telemetry reading, neighbor discovery, and remote configuration.
+
+## How to Access
+
+From the Contacts screen:
+1. Long-press a **Repeater** or **Room** contact
+2. Select "Manage Repeater" or "Room Management"
+3. Enter the admin password in the login dialog
+4. Navigate to the Repeater Hub Screen
+
+### Login Dialog
+
+- Password field with show/hide toggle
+- "Save password" checkbox (persists for future logins). If a saved password exists, it is pre-filled and the checkbox is pre-checked, making login one-tap
+- Routing mode selector and "Manage Paths" link are available directly in the dialog (configure routing before login)
+- Auto-retries up to 5 times on timeout, showing progress ("Attempt 2 of 5"). A wrong password (explicit failure response) stops immediately — only timeouts trigger retries
+- If auto-clock-sync is enabled for this repeater (configured in Repeater Settings), a `clock sync` command is sent automatically on successful login
+
+---
+
+## Repeater Hub Screen
+
+The central management screen showing:
+
+- **Header card**: Repeater name, short public key, path label, GPS coordinates (if known)
+- **Battery chemistry selector**: NMC / LiFePO4 / LiPo (saved per repeater)
+- **Management tool cards** (full-width cards with chevron arrows, not a grid). Title dynamically shows "Repeater Management" or "Room Management" (admin) or "Repeater Guest" / "Room Guest" (guest) based on contact type and login result:
+
+| Card | Destination | Visibility |
+|---|---|---|
+| Status | Repeater Status Screen | All users |
+| Telemetry | Telemetry Screen | All users |
+| CLI | Repeater CLI Screen | Admin only |
+| Neighbors | Neighbors Screen | All users |
+| Settings | Repeater Settings Screen | Admin only |
+
+The battery chemistry selector and CLI/Settings cards are hidden from guest users.
+
+---
+
+## Repeater Status
+
+### What the User Sees
+
+Three information cards:
+
+**System Information**:
+- Battery percentage and voltage (e.g. "85% / 3.95V"), using the battery chemistry set in the hub screen
+- Clock at login time
+- Uptime (days/hours/minutes/seconds)
+- Queue length
+- Debug flags (error event count)
+
+**Radio Statistics**:
+- Last RSSI and SNR
+- Noise floor
+- TX airtime and RX airtime
+
+**Packet Statistics**:
+- Packets sent and received, each broken down by flood vs. direct
+- Duplicates, broken down by flood vs. direct
+- Channel utilization (% of uptime used by TX + RX)
+
+### Key Interactions
+- Auto-queries the repeater on open; shows a loading spinner until data arrives
+- On timeout: red snackbar error. On success: data appears in-place (no extra snackbar)
+- Pull-to-refresh or refresh button in the app bar to re-query
+- Routing mode popup and path management dialog in app bar (these controls appear on **all** management sub-screens, not just Status)
+- Accepts both binary `RESP_CODE_STATUS_RESPONSE` frames and legacy JSON text responses
+
+---
+
+## Repeater CLI
+
+A terminal-style interface for sending commands directly to the repeater.
+
+### What the User Sees
+
+- **Quick-command bar** (horizontal scroll): Shortcut buttons for 9 common commands (advert, get name, get radio, get tx, discover.neighbors, neighbors, ver, clock, clock sync)
+- **Command history list**: Sent commands in primary color, responses in secondary color
+- **Input bar**: Up/down history arrows, monospace text field with `> ` prefix, send button
+
+### Key Interactions
+
+- Type a command and press send (or Enter on desktop)
+- Up/down arrows navigate through command history
+- Quick-command buttons populate and send common commands
+- Bug report icon: Shows raw frame debug info for the next typed command (shows error snackbar if input field is empty)
+- Help icon: Opens a scrollable reference of all known CLI commands. Tapping any command populates the input field immediately
+- Clear icon: Wipes the command/response history
+- Failed/timed-out commands are automatically retried once
+
+### Available CLI Commands
+
+The in-app help reference (help icon) documents all known commands. Categories:
+
+**General**: `advert`, `advert.zerohop`, `reboot`, `clock`, `clock sync`, `password`, `ver`, `clear stats`, `erase`, `poweroff`, `shutdown`, `clkreboot`, `start ota`, `time`, `board`, `discover.neighbors`, `powersaving`, `stats-packets`, `stats-radio`, `stats-core`
+
+**Get**: `get name`, `get role`, `get public.key`, `get prv.key`, `get repeat`, `get tx`, `get freq`, `get radio`, `get radio.rxgain`, `get af`, `get dutycycle`, `get int.thresh`, `get agc.reset.interval`, `get multi.acks`, `get allow.read.only`, `get advert.interval`, `get flood.advert.interval`, `get guest.password`, `get lat`, `get lon`, `get rxdelay`, `get txdelay`, `get direct.txdelay`, `get flood.max`, `get owner.info`, `get path.hash.mode`, `get loop.detect`, `get acl`, `get bridge.*`, `get adc.multiplier`, `get bootloader.ver`
+
+**Set**: `set name`, `set af`, `set tx`, `set repeat`, `set allow.read.only`, `set flood.max`, `set int.thresh`, `set agc.reset.interval`, `set multi.acks`, `set advert.interval`, `set flood.advert.interval`, `set guest.password`, `set lat`, `set lon`, `set freq`, `set radio`, `set rxdelay`, `set txdelay`, `set direct.txdelay`, `set radio.rxgain`, `set dutycycle`, `set loop.detect`, `set path.hash.mode`, `set owner.info`, `set prv.key`, `set bridge.*`, `set adc.multiplier`, `tempradio`, `setperm`
+
+**Bridge**: `get bridge.type`
+
+**Logging**: `log start`, `log stop`, `log erase`
+
+**Neighbors**: `neighbors`, `neighbor.remove`
+
+**Power Management**: `get pwrmgt.support`, `get pwrmgt.source`, `get pwrmgt.bootreason`, `get pwrmgt.bootmv`
+
+**Sensors**: `sensor get {key}`
+
+**Region Management**: `region`, `region load`, `region get`, `region put`, `region remove`, `region allowf`, `region denyf`, `region home`, `region save`, `region default`, `region list allowed`, `region list denied`
+
+---
+
+## Telemetry
+
+### What the User Sees
+
+A list of Cayenne LPP sensor channel cards:
+
+- **Channel 1** (special): Battery voltage (shown as percentage or raw mV) and MCU temperature
+- **Other channels**: Raw sensor values with appropriate labels
+
+Shows "No data" until a response arrives from the repeater.
+
+### Key Interactions
+- Auto-queries on open
+- Pull-to-refresh
+- Temperature respects metric/imperial setting
+- Battery readings are stored for the repeater's battery snapshot
+
+---
+
+## Neighbors
+
+### What the User Sees
+
+A card titled "Repeater's Neighbors - N" listing each neighbor as:
+- Repeater name (or hex key prefix if unknown)
+- Time since last heard
+- SNR quality icon with color coding and label
+
+### Key Interactions
+- Auto-queries up to 15 neighbors on open
+- Matches public key prefixes against known contacts to show names
+- Pull-to-refresh
+
+---
+
+## Repeater Settings
+
+### What the User Sees
+
+Nine configuration cards, each with its own per-field refresh button(s):
+
+**1. Basic Settings**
+- Name field
+- Admin password field (write-only; always sent when non-empty)
+- Guest password field (write-only; always sent when non-empty)
+
+**2. Radio Settings**
+- Frequency (MHz)
+- TX Power (dBm) — has its own independent refresh button
+- Bandwidth dropdown (kHz)
+- Spreading Factor (SF5–SF12)
+- Coding Rate (4/5–4/8)
+- RX Gain boost toggle
+
+**3. Location Settings**
+- Latitude and longitude fields, each with an independent refresh button
+
+**4. Features**
+- Packet forwarding toggle (`set repeat`)
+- Guest access toggle (`set allow.read.only`)
+- Multi-ACKs toggle (`set multi.acks`)
+- Auto clock sync after login toggle (local app setting only, not sent to repeater)
+
+**5. Network Health**
+- Loop detection dropdown (off / minimal / moderate / strict; `set loop.detect`)
+- Duty cycle slider (1–100%; `set dutycycle`)
+
+**6. Advertisement Settings**
+- Local advert interval slider (60–240 minutes) with enable/disable toggle
+- Flood advert interval slider (3–168 hours) with enable/disable toggle
+- Flood max hops slider (0–64; `set flood.max`)
+
+**7. Owner Info**
+- Multi-line text field for operator contact info (`set owner.info`); newlines sent as `|`
+
+**8. Actions** (one-tap, no save needed)
+- Send Advertisement (`advert`)
+- Send Zero-Hop Advertisement (`advert.zerohop`)
+- Clock Sync (`clock sync`)
+
+**9. Advanced** (collapsed by default)
+- Path hash mode dropdown (0–2; `set path.hash.mode`)
+- TX delay field (`set txdelay`)
+- Direct TX delay field (`set direct.txdelay`)
+- Interference threshold field (`set int.thresh`)
+- AGC reset interval slider (0–240s in multiples of 4; `set agc.reset.interval`)
+
+**Danger Zone** (red-styled card)
+- Reboot repeater (sends `reboot` with confirmation dialog)
+- Erase filesystem (serial-only; shows informational snackbar only — no command is sent over the air)
+
+### Key Interactions
+- **Settings are NOT auto-fetched on open**. Name is pre-filled from cached contact data. Each section has its own refresh button to fetch live values from the repeater
+- TX Power, RX Gain, latitude, longitude, and advanced fields each have independent inline refresh buttons
+- Save button in app bar appears when any change is detected; failed commands keep those fields dirty for retry
+- Settings are sent sequentially with 200ms delays between commands; firmware responses are checked and partial failures are reported in a snackbar
+- Some changes (e.g. radio frequency) require a reboot; the firmware response triggers an orange "reboot needed" snackbar
+- Advertisement interval sliders reset to defaults when re-enabled (local: 60 min, flood: 3 hours)
+- **Erase Filesystem** does NOT send any command over the air — tapping it only shows a snackbar explaining the operation requires physical serial access

documentation/scanner-and-connection.md

@@ -0,0 +1,124 @@
+# Scanner & Connection
+
+## BLE Scanner (Home Screen)
+
+The BLE Scanner is the app's home screen, displayed immediately on launch.
+
+### How to Access
+
+- Opens automatically when the app starts
+- Returns here when disconnecting from any device
+- Accessible by navigating back from a connected session
+
+### What the User Sees
+
+**App Bar**: Centered title "Scanner".
+
+**Bluetooth-Off Warning Banner** (conditional): Appears when the Bluetooth adapter is off, showing a `bluetooth_disabled` icon, a warning message, and on Android, an "Enable Bluetooth" button.
+
+**Status Bar**: A full-width colored strip reflecting the current connection state:
+
+| State | Text | Color |
+|---|---|---|
+| Disconnected | "Not connected" | Grey |
+| Scanning | "Scanning..." | Blue |
+| Connecting | "Connecting..." | Orange |
+| Connected | "Connected to \<device name\>" | Green |
+| Disconnecting | "Disconnecting..." | Orange |
+
+**Device List**: When no devices are found, shows a large Bluetooth icon with a prompt. The prompt text is dynamic: "Searching for devices..." while actively scanning, or "Tap Scan to search" when idle. When devices are found, shows a scrollable list of `DeviceTile` widgets.
+
+**Bottom FAB Row**: Up to three floating action buttons:
+- **USB** button - Opens USB connection screen (Android, Windows, Linux, macOS, Chrome web only)
+- **TCP/IP** button - Opens TCP connection screen (all non-web platforms)
+- **BLE Scan** button - Toggles BLE scanning on/off; shows a spinner when scanning. **Disabled** (greyed out, not tappable) when Bluetooth is off
+
+### Device Tile
+
+Each discovered device is displayed as a list tile showing:
+- **Signal strength icon** (color-coded by RSSI):
+  - Green: >= -60 dBm (excellent)
+  - Light green: -60 to -70 dBm (good)
+  - Amber: -70 to -80 dBm (fair)
+  - Orange: -80 to -90 dBm (weak)
+  - Red: < -90 dBm (poor)
+- **RSSI value** in dBm (e.g., "-72 dBm")
+- **Device name** (falls back to "Unknown Device")
+- **Device ID** (BLE MAC address on Android; a system-assigned UUID on iOS/macOS)
+- **Connect button** (the entire tile row is also tappable — both trigger connection)
+
+Note: The weak (-80 to -90 dBm) and poor (< -90 dBm) tiers share the same icon shape and are only differentiated by color (orange vs. red).
+
+### How Scanning Works
+
+- Filters for devices with names starting with one of the known prefixes: `MeshCore-`, `Whisper-`, `WisCore-`, `Seeed`, `Lilygo`, `HT-`, `LowMesh_MC_`
+- Uses low-latency scan mode on Android
+- Scans for 10 seconds then auto-stops
+- On iOS/macOS, waits for BLE adapter initialization before starting
+- If Bluetooth is turned off during a scan, scanning stops immediately
+
+### Connecting to a Device
+
+Tap a device tile or its Connect button:
+1. The connector stops scanning and transitions to "connecting"
+2. Connects to the device with a 15-second timeout (6 seconds on Linux)
+3. Requests MTU 185 bytes for optimal throughput
+4. Discovers BLE services and locates the Nordic UART Service
+5. Subscribes to TX notifications for receiving data
+6. On success, automatically navigates to the Contacts screen
+7. On failure, shows a red error snackbar
+
+---
+
+## USB Connection
+
+### How to Access
+
+From the Scanner screen, tap the **USB** FAB button.
+
+### What the User Sees
+
+- A colored status bar at the top (same color scheme as BLE scanner)
+- A list of detected USB serial ports, each showing:
+  - Friendly display name
+  - Raw port name (subtitle, only shown when it differs from the display name)
+  - "Connect" button
+- FABs at the bottom to switch to BLE or TCP (these use `pushReplacement`, so back navigation returns to Scanner, not between USB/TCP)
+
+### Key Interactions
+
+- On desktop (Windows, Linux, macOS): ports are polled every 2 seconds for hot-plug detection (polling pauses while connecting/connected)
+- On mobile: tap the "Scan" FAB to manually refresh
+- Tap a port or its Connect button to connect
+- On successful connection, navigates to Contacts screen
+- On connection failure, the port list automatically refreshes
+- Platform-specific error messages for common USB failures (permission denied, device missing, device detached, device busy, driver missing, port invalid, timeout, and more)
+
+---
+
+## TCP Connection
+
+### How to Access
+
+From the Scanner screen, tap the **TCP/IP** FAB button.
+
+### What the User Sees
+
+- A colored status bar at the top
+- **Host address** text field
+- **Port number** text field
+- **Connect** button
+- FABs at the bottom to switch to USB or BLE
+
+### Key Interactions
+
+- Last-used host and port are pre-populated from saved settings
+- Tap Connect to validate inputs and connect
+  - Host must not be empty
+  - Port must be a number between 1 and 65535
+  - Validation errors are shown as red snackbars
+- The Connect button shows a spinner and "Connecting..." label while in progress
+- The status bar shows the specific host:port being connected to (e.g., "Connecting to 192.168.1.1:5000")
+- On success, navigates to Contacts screen and saves the host/port to settings
+- On connection, the status bar shows the active TCP endpoint (e.g., "Connected to 192.168.1.1:5000")
+- Error messages for timeout, unsupported platform, and connection failures

documentation/settings.md

@@ -0,0 +1,179 @@
+# Settings
+
+## How to Access
+
+- From the Device Screen: tap the tune/sliders icon in the app bar
+- From Contacts or Channels: overflow menu (three-dot) → Settings
+
+Settings are only accessible while a device is connected.
+
+## Settings Screen Layout
+
+The settings screen is a scrollable list of cards:
+
+1. [Device Info](#device-info)
+2. [App Settings](#app-settings) (link to sub-screen)
+3. [Node Settings](#node-settings)
+4. [Actions](#actions)
+5. [Debug](#debug)
+6. [Export](#export)
+7. [About](#about)
+
+---
+
+## Device Info
+
+A collapsible card showing read-only device information. **Collapsed by default** — tap the header to expand with an animated chevron indicator:
+
+| Field | Description |
+|---|---|
+| Name | Connected device's display name |
+| ID | Device identifier |
+| Status | Connected / Disconnected |
+| Battery | Percentage or voltage (tap to toggle) |
+| Node Name | The node's mesh identity name |
+| Public Key | First 16 hex characters + "..." |
+| Contacts Count | Number of known contacts |
+| Channel Count | Number of configured channels |
+
+Battery shows an alert icon and orange text when at 15% or below. The toggle only works when millivolt data is available from the firmware.
+
+---
+
+## App Settings
+
+A dedicated sub-screen for app-level preferences (nothing here is sent to the device). All settings persist locally via SharedPreferences.
+
+### Appearance
+- **Theme**: System / Light / Dark
+- **Language**: System default or one of 18 languages (English, French, Spanish, German, Polish, Slovenian, Portuguese, Italian, Chinese, Swedish, Dutch, Slovak, Bulgarian, Russian, Ukrainian, Hungarian, Japanese, Korean)
+- **Enable Message Tracing**: Shows path trace overlays and extra metadata on messages
+
+### Notifications
+- **Master enable/disable**: Requests OS permission when enabling
+- **Message notifications**: New direct message alerts
+- **Channel message notifications**: New channel message alerts
+- **Advertisement notifications**: New node discovery alerts
+
+### Messaging
+- **Clear Path on Max Retry**: Erases the stored routing path after all retries fail
+- **Jump to Oldest Unread**: When opening a chat, scrolls to the oldest unread message instead of the newest
+- **Auto Route Rotation**: Enables weighted routing algorithm. When enabled, expands to show five slider sub-settings (hidden when off):
+  - Max Route Weight (1–10, default 5, integer steps)
+  - Initial Route Weight (0.5–5.0, default 3.0)
+  - Success Increment (0.1–2.0, default 0.5, 0.1 steps)
+  - Failure Decrement (0.1–2.0, default 0.2, 0.1 steps)
+  - Max Message Retries (2–10, default 5)
+
+### Battery
+- **Battery Chemistry**: NMC / LiFePO4 / LiPo (per device, used to calibrate percentage from voltage)
+
+### Translation
+Not shown on web. Controls on-device message translation powered by a locally-downloaded ML model:
+- **Enable Translation**: Translates incoming messages into the selected target language
+- **Translate Composer**: Translates outgoing messages from the target language back before sending
+- **Target Language**: Language to translate into (searchable list; defaults to the app language)
+- **Downloaded Model**: Dropdown to select among already-downloaded translation models
+- **Preset Model**: Download a curated preset model with one tap
+- **Custom Model URL**: Enter a URL to download a custom GGUF-format model; shows download progress and a cancel button
+
+### Map Display
+- **Show Repeaters**: Toggle repeater markers on map
+- **Show Chat Nodes**: Toggle chat node markers
+- **Show Other Nodes**: Toggle room/sensor markers
+- **Time Filter**: All time / Last 1h / Last 6h / Last 24h / Last week
+- **Units**: Metric / Imperial
+- **Offline Map Cache**: Navigate to tile download screen
+
+### Debug
+- **App Debug Logging**: Enable the in-app debug log
+
+---
+
+## Node Settings
+
+These settings are sent directly to the connected device firmware.
+
+### Node Name
+- Opens a dialog with a text field (max 31 characters)
+- Sends the new name to the device
+- Confirmed via snackbar
+
+### Radio Settings
+Opens a dialog pre-populated with the device's current radio settings. Contains:
+- **Preset dropdown**: 19 regional presets — selecting a preset immediately fills all fields below. Full list: Australia, Australia (Narrow), Australia SA, WA, QLD, Czech Republic, EU 433MHz, EU/UK (Long Range), EU/UK (Medium Range), EU/UK (Narrow), New Zealand, New Zealand (Narrow), Portugal 433, Portugal 869, Switzerland, USA Arizona, USA/Canada, Vietnam, Off-Grid 433, Off-Grid 869, Off-Grid 918
+- **Frequency** (MHz): Free text, validated 300–2500 MHz
+- **Bandwidth**: Dropdown (7.8 / 10.4 / 15.6 / 20.8 / 31.25 / 41.7 / 62.5 / 125 / 250 / 500 kHz)
+- **Spreading Factor**: SF5–SF12
+- **Coding Rate**: 4/5, 4/6, 4/7, 4/8
+- **TX Power** (dBm): Validated 0 to device max (typically 22 dBm)
+- **Client Repeat** toggle: Only shown on firmware v9+; requires frequency to be exactly 433.000, 869.000, or 918.000 MHz (the Off-Grid presets). Save is blocked with a warning if enabled on other frequencies
+
+### Location
+Opens a dialog pre-populated with the device's current coordinates (if known):
+- Latitude and longitude fields (decimal, 6 decimal places). If only one field is provided, the other uses the device's current value
+- If GPS-capable hardware (detected via `gps` custom variable):
+  - GPS Update Interval (seconds, 60–86399, default 900 = 15 minutes). Validated and sent separately before lat/lon
+  - Enable GPS toggle (takes effect immediately, not deferred to Save)
+- Validation: lat ±90, lon ±180
+
+### Contact Settings
+Five toggles controlling which node types are auto-added when heard:
+- Auto-add Chat Users
+- Auto-add Repeaters
+- Auto-add Room Servers
+- Auto-add Sensors
+- Overwrite Oldest (when contact list is full)
+
+### Privacy Mode
+Opens a confirmation dialog with three buttons: Cancel, Enable, and Disable. Both states can be set from the same dialog regardless of current state. A snackbar confirms which state was applied. When on, the node stops broadcasting its location in advertisements.
+
+---
+
+## Actions
+
+One-tap device operations:
+
+| Action | Description |
+|---|---|
+| Send Advertisement | Floods the mesh with your node's advertisement |
+| Sync Time | Sends current Unix timestamp to the device |
+| Refresh Contacts | Re-requests the full contact list |
+| Reboot Device | Confirmation dialog → reboots the device (shown in orange) |
+
+---
+
+## Debug
+
+Two log viewers accessible via list tiles:
+
+### BLE Debug Log
+Two views (togglable via segmented button):
+- **Frames view**: Direction icon, description, hex preview, timestamp per frame. Long-press to copy hex.
+- **Raw Log RX view**: Decoded LoRa packets with route type, payload type, path, and summary.
+- Copy-all and Clear buttons in the app bar.
+
+### App Debug Log
+Structured log entries (Info / Warning / Error), with tag, message, and timestamp.
+- Must be enabled first in App Settings → Debug
+- Copy-all and Clear buttons
+
+---
+
+## Export
+
+Three GPX export options (not available on web):
+
+| Option | Exports |
+|---|---|
+| Export Repeaters | Repeaters and Rooms with GPS coordinates |
+| Export Contacts | Chat contacts with GPS coordinates |
+| Export All | All contacts with GPS coordinates |
+
+Each creates a `.gpx` file and opens the OS share sheet. Feedback via snackbar for four outcomes: success, no contacts with coordinates, feature not available (web), or error.
+
+---
+
+## About
+
+Shows the standard Flutter about dialog with app name, version, and legal notice.

ios/Flutter/AppFrameworkInfo.plist

@@ -20,7 +20,5 @@
   <string>????</string>
   <key>CFBundleVersion</key>
   <string>1.0</string>
-  <key>MinimumOSVersion</key>
-  <string>13.0</string>
 </dict>
 </plist>

ios/Podfile

@@ -1,4 +1,4 @@
-platform :ios, '15.5'
+platform :ios, '16.4'
 
 ENV['COCOAPODS_DISABLE_STATS'] = 'true'
 
@@ -32,5 +32,8 @@ end
 post_install do |installer|
   installer.pods_project.targets.each do |target|
     flutter_additional_ios_build_settings(target)
+    target.build_configurations.each do |config|
+      config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '16.4'
+    end
   end
 end

ios/Podfile.lock

@@ -7,57 +7,13 @@ PODS:
     - Flutter
   - flutter_local_notifications (0.0.1):
     - Flutter
-  - GoogleDataTransport (10.1.0):
-    - nanopb (~> 3.30910.0)
-    - PromisesObjC (~> 2.4)
-  - GoogleMLKit/BarcodeScanning (7.0.0):
-    - GoogleMLKit/MLKitCore
-    - MLKitBarcodeScanning (~> 6.0.0)
-  - GoogleMLKit/MLKitCore (7.0.0):
-    - MLKitCommon (~> 12.0.0)
-  - GoogleToolboxForMac/Defines (4.2.1)
-  - GoogleToolboxForMac/Logger (4.2.1):
-    - GoogleToolboxForMac/Defines (= 4.2.1)
-  - "GoogleToolboxForMac/NSData+zlib (4.2.1)":
-    - GoogleToolboxForMac/Defines (= 4.2.1)
-  - GoogleUtilities/Environment (8.1.0):
-    - GoogleUtilities/Privacy
-  - GoogleUtilities/Logger (8.1.0):
-    - GoogleUtilities/Environment
-    - GoogleUtilities/Privacy
-  - GoogleUtilities/Privacy (8.1.0)
-  - GoogleUtilities/UserDefaults (8.1.0):
-    - GoogleUtilities/Logger
-    - GoogleUtilities/Privacy
-  - GTMSessionFetcher/Core (3.5.0)
-  - MLImage (1.0.0-beta6)
-  - MLKitBarcodeScanning (6.0.0):
-    - MLKitCommon (~> 12.0)
-    - MLKitVision (~> 8.0)
-  - MLKitCommon (12.0.0):
-    - GoogleDataTransport (~> 10.0)
-    - GoogleToolboxForMac/Logger (< 5.0, >= 4.2.1)
-    - "GoogleToolboxForMac/NSData+zlib (< 5.0, >= 4.2.1)"
-    - GoogleUtilities/Logger (~> 8.0)
-    - GoogleUtilities/UserDefaults (~> 8.0)
-    - GTMSessionFetcher/Core (< 4.0, >= 3.3.2)
-  - MLKitVision (8.0.0):
-    - GoogleToolboxForMac/Logger (< 5.0, >= 4.2.1)
-    - "GoogleToolboxForMac/NSData+zlib (< 5.0, >= 4.2.1)"
-    - GTMSessionFetcher/Core (< 4.0, >= 3.3.2)
-    - MLImage (= 1.0.0-beta6)
-    - MLKitCommon (~> 12.0)
-  - mobile_scanner (6.0.2):
+  - mobile_scanner (7.0.0):
     - Flutter
-    - GoogleMLKit/BarcodeScanning (~> 7.0.0)
-  - nanopb (3.30910.0):
-    - nanopb/decode (= 3.30910.0)
-    - nanopb/encode (= 3.30910.0)
-  - nanopb/decode (3.30910.0)
-  - nanopb/encode (3.30910.0)
+    - FlutterMacOS
   - package_info_plus (0.4.5):
     - Flutter
-  - PromisesObjC (2.4.0)
+  - share_plus (0.0.1):
+    - Flutter
   - shared_preferences_foundation (0.0.1):
     - Flutter
     - FlutterMacOS
@@ -66,34 +22,18 @@ PODS:
     - FlutterMacOS
   - url_launcher_ios (0.0.1):
     - Flutter
-  - wakelock_plus (0.0.1):
-    - Flutter
 
 DEPENDENCIES:
   - Flutter (from `Flutter`)
   - flutter_blue_plus_darwin (from `.symlinks/plugins/flutter_blue_plus_darwin/darwin`)
   - flutter_foreground_task (from `.symlinks/plugins/flutter_foreground_task/ios`)
   - flutter_local_notifications (from `.symlinks/plugins/flutter_local_notifications/ios`)
-  - mobile_scanner (from `.symlinks/plugins/mobile_scanner/ios`)
+  - mobile_scanner (from `.symlinks/plugins/mobile_scanner/darwin`)
   - package_info_plus (from `.symlinks/plugins/package_info_plus/ios`)
+  - share_plus (from `.symlinks/plugins/share_plus/ios`)
   - shared_preferences_foundation (from `.symlinks/plugins/shared_preferences_foundation/darwin`)
   - sqflite_darwin (from `.symlinks/plugins/sqflite_darwin/darwin`)
   - url_launcher_ios (from `.symlinks/plugins/url_launcher_ios/ios`)
-  - wakelock_plus (from `.symlinks/plugins/wakelock_plus/ios`)
-
-SPEC REPOS:
-  trunk:
-    - GoogleDataTransport
-    - GoogleMLKit
-    - GoogleToolboxForMac
-    - GoogleUtilities
-    - GTMSessionFetcher
-    - MLImage
-    - MLKitBarcodeScanning
-    - MLKitCommon
-    - MLKitVision
-    - nanopb
-    - PromisesObjC
 
 EXTERNAL SOURCES:
   Flutter:
@@ -105,41 +45,30 @@ EXTERNAL SOURCES:
   flutter_local_notifications:
     :path: ".symlinks/plugins/flutter_local_notifications/ios"
   mobile_scanner:
-    :path: ".symlinks/plugins/mobile_scanner/ios"
+    :path: ".symlinks/plugins/mobile_scanner/darwin"
   package_info_plus:
     :path: ".symlinks/plugins/package_info_plus/ios"
+  share_plus:
+    :path: ".symlinks/plugins/share_plus/ios"
   shared_preferences_foundation:
     :path: ".symlinks/plugins/shared_preferences_foundation/darwin"
   sqflite_darwin:
     :path: ".symlinks/plugins/sqflite_darwin/darwin"
   url_launcher_ios:
     :path: ".symlinks/plugins/url_launcher_ios/ios"
-  wakelock_plus:
-    :path: ".symlinks/plugins/wakelock_plus/ios"
 
 SPEC CHECKSUMS:
   Flutter: cabc95a1d2626b1b06e7179b784ebcf0c0cde467
   flutter_blue_plus_darwin: 20a08bfeaa0f7804d524858d3d8744bcc1b6dbc3
   flutter_foreground_task: a159d2c2173b33699ddb3e6c2a067045d7cebb89
-  flutter_local_notifications: 395056b3175ba4f08480a7c5de30cd36d69827e4
-  GoogleDataTransport: aae35b7ea0c09004c3797d53c8c41f66f219d6a7
-  GoogleMLKit: eff9e23ec1d90ea4157a1ee2e32a4f610c5b3318
-  GoogleToolboxForMac: d1a2cbf009c453f4d6ded37c105e2f67a32206d8
-  GoogleUtilities: 00c88b9a86066ef77f0da2fab05f65d7768ed8e1
-  GTMSessionFetcher: 5aea5ba6bd522a239e236100971f10cb71b96ab6
-  MLImage: 0ad1c5f50edd027672d8b26b0fee78a8b4a0fc56
-  MLKitBarcodeScanning: 0a3064da0a7f49ac24ceb3cb46a5bc67496facd2
-  MLKitCommon: 07c2c33ae5640e5380beaaa6e4b9c249a205542d
-  MLKitVision: 45e79d68845a2de77e2dd4d7f07947f0ed157b0e
-  mobile_scanner: af8f71879eaba2bbcb4d86c6a462c3c0e7f23036
-  nanopb: fad817b59e0457d11a5dfbde799381cd727c1275
+  flutter_local_notifications: a5a732f069baa862e728d839dd2ebb904737effb
+  mobile_scanner: 9157936403f5a0644ca3779a38ff8404c5434a93
   package_info_plus: af8e2ca6888548050f16fa2f1938db7b5a5df499
-  PromisesObjC: f5707f49cb48b9636751c5b2e7d227e43fba9f47
+  share_plus: 50da8cb520a8f0f65671c6c6a99b3617ed10a58a
   shared_preferences_foundation: 7036424c3d8ec98dfe75ff1667cb0cd531ec82bb
   sqflite_darwin: 20b2a3a3b70e43edae938624ce550a3cbf66a3d0
   url_launcher_ios: 7a95fa5b60cc718a708b8f2966718e93db0cef1b
-  wakelock_plus: e29112ab3ef0b318e58cfa5c32326458be66b556
 
-PODFILE CHECKSUM: 570da2a631486c6bd6496bed1e605e63e2471be5
+PODFILE CHECKSUM: e42b502c78c33aa1ed9d42eaea8960ce2139504b
 
 COCOAPODS: 1.16.2

ios/Runner.xcodeproj/project.pbxproj

@@ -179,6 +179,7 @@
 				97C146EC1CF9000F007C117D /* Resources */,
 				9705A1C41CF9048500538489 /* Embed Frameworks */,
 				3B06AD1E1E4923F5004D2608 /* Thin Binary */,
+				F0D7F2413C6E4B7A9B1C2D3E /* Fix Native Asset Minimum OS */,
 				B788CEDB957A87EE8AC593BB /* [CP] Copy Pods Resources */,
 			);
 			buildRules = (
@@ -299,6 +300,22 @@
 			shellScript = "\"${PODS_ROOT}/Target Support Files/Pods-Runner/Pods-Runner-resources.sh\"\n";
 			showEnvVarsInLog = 0;
 		};
+		F0D7F2413C6E4B7A9B1C2D3E /* Fix Native Asset Minimum OS */ = {
+			isa = PBXShellScriptBuildPhase;
+			alwaysOutOfDate = 1;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			inputPaths = (
+				"${TARGET_BUILD_DIR}/${FRAMEWORKS_FOLDER_PATH}",
+			);
+			name = "Fix Native Asset Minimum OS";
+			outputPaths = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+			shellPath = /bin/sh;
+			shellScript = "set -e\nFRAMEWORKS_DIR=\"${TARGET_BUILD_DIR}/${FRAMEWORKS_FOLDER_PATH}\"\nMIN_OS=\"${IPHONEOS_DEPLOYMENT_TARGET}\"\nif [ ! -d \"$FRAMEWORKS_DIR\" ] || [ -z \"$MIN_OS\" ]; then\n  exit 0\nfi\nfind \"$FRAMEWORKS_DIR\" -maxdepth 2 -name Info.plist | while read -r plist; do\n  bundle_id=$(/usr/libexec/PlistBuddy -c 'Print :CFBundleIdentifier' \"$plist\" 2>/dev/null || true)\n  case \"$bundle_id\" in\n    io.flutter.flutter.native-assets.*)\n      /usr/libexec/PlistBuddy -c \"Set :MinimumOSVersion $MIN_OS\" \"$plist\" 2>/dev/null || \\\n      /usr/libexec/PlistBuddy -c \"Add :MinimumOSVersion string $MIN_OS\" \"$plist\"\n      ;;\n  esac\ndone\n";
+		};
 		DE3B2E091393835C0B38492E /* [CP] Check Pods Manifest.lock */ = {
 			isa = PBXShellScriptBuildPhase;
 			buildActionMask = 2147483647;
@@ -414,7 +431,7 @@
 				GCC_WARN_UNINITIALIZED_AUTOS = YES_AGGRESSIVE;
 				GCC_WARN_UNUSED_FUNCTION = YES;
 				GCC_WARN_UNUSED_VARIABLE = YES;
-				IPHONEOS_DEPLOYMENT_TARGET = 13.0;
+				IPHONEOS_DEPLOYMENT_TARGET = 16.4;
 				MTL_ENABLE_DEBUG_INFO = NO;
 				SDKROOT = iphoneos;
 				SUPPORTED_PLATFORMS = iphoneos;
@@ -540,7 +557,7 @@
 				GCC_WARN_UNINITIALIZED_AUTOS = YES_AGGRESSIVE;
 				GCC_WARN_UNUSED_FUNCTION = YES;
 				GCC_WARN_UNUSED_VARIABLE = YES;
-				IPHONEOS_DEPLOYMENT_TARGET = 13.0;
+				IPHONEOS_DEPLOYMENT_TARGET = 16.4;
 				MTL_ENABLE_DEBUG_INFO = YES;
 				ONLY_ACTIVE_ARCH = YES;
 				SDKROOT = iphoneos;
@@ -591,7 +608,7 @@
 				GCC_WARN_UNINITIALIZED_AUTOS = YES_AGGRESSIVE;
 				GCC_WARN_UNUSED_FUNCTION = YES;
 				GCC_WARN_UNUSED_VARIABLE = YES;
-				IPHONEOS_DEPLOYMENT_TARGET = 13.0;
+				IPHONEOS_DEPLOYMENT_TARGET = 16.4;
 				MTL_ENABLE_DEBUG_INFO = NO;
 				SDKROOT = iphoneos;
 				SUPPORTED_PLATFORMS = iphoneos;

ios/Runner/AppDelegate.swift

@@ -2,12 +2,15 @@ import Flutter
 import UIKit
 
 @main
-@objc class AppDelegate: FlutterAppDelegate {
+@objc class AppDelegate: FlutterAppDelegate, FlutterImplicitEngineDelegate {
   override func application(
     _ application: UIApplication,
     didFinishLaunchingWithOptions launchOptions: [UIApplication.LaunchOptionsKey: Any]?
   ) -> Bool {
-    GeneratedPluginRegistrant.register(with: self)
     return super.application(application, didFinishLaunchingWithOptions: launchOptions)
   }
+
+  func didInitializeImplicitFlutterEngine(_ engineBridge: FlutterImplicitEngineBridge) {
+    GeneratedPluginRegistrant.register(with: engineBridge.pluginRegistry)
+  }
 }

ios/Runner/Info.plist

@@ -2,6 +2,8 @@
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
+	<key>CADisableMinimumFrameDurationOnPhone</key>
+	<true/>
 	<key>CFBundleDevelopmentRegion</key>
 	<string>$(DEVELOPMENT_LANGUAGE)</string>
 	<key>CFBundleDisplayName</key>
@@ -22,8 +24,46 @@
 	<string>????</string>
 	<key>CFBundleVersion</key>
 	<string>$(FLUTTER_BUILD_NUMBER)</string>
+	<key>LSApplicationQueriesSchemes</key>
+	<array>
+		<string>http</string>
+		<string>https</string>
+	</array>
 	<key>LSRequiresIPhoneOS</key>
 	<true/>
+	<key>NSBluetoothAlwaysUsageDescription</key>
+	<string>This app uses Bluetooth to communicate with MeshCore devices.</string>
+	<key>NSBluetoothPeripheralUsageDescription</key>
+	<string>This app uses Bluetooth to communicate with MeshCore devices.</string>
+	<key>NSCameraUsageDescription</key>
+	<string>This app uses the camera to scan QR codes for joining communities.</string>
+	<key>UIApplicationSceneManifest</key>
+	<dict>
+		<key>UIApplicationSupportsMultipleScenes</key>
+		<false/>
+		<key>UISceneConfigurations</key>
+		<dict>
+			<key>UIWindowSceneSessionRoleApplication</key>
+			<array>
+				<dict>
+					<key>UISceneClassName</key>
+					<string>UIWindowScene</string>
+					<key>UISceneConfigurationName</key>
+					<string>flutter</string>
+					<key>UISceneDelegateClassName</key>
+					<string>FlutterSceneDelegate</string>
+					<key>UISceneStoryboardFile</key>
+					<string>Main</string>
+				</dict>
+			</array>
+		</dict>
+	</dict>
+	<key>UIApplicationSupportsIndirectInputEvents</key>
+	<true/>
+	<key>UIBackgroundModes</key>
+	<array>
+		<string>bluetooth-central</string>
+	</array>
 	<key>UILaunchStoryboardName</key>
 	<string>LaunchScreen</string>
 	<key>UIMainStoryboardFile</key>
@@ -41,24 +81,5 @@
 		<string>UIInterfaceOrientationLandscapeLeft</string>
 		<string>UIInterfaceOrientationLandscapeRight</string>
 	</array>
-	<key>CADisableMinimumFrameDurationOnPhone</key>
-	<true/>
-	<key>UIApplicationSupportsIndirectInputEvents</key>
-	<true/>
-	<key>UIBackgroundModes</key>
-	<array>
-		<string>bluetooth-central</string>
-	</array>
-	<key>NSBluetoothAlwaysUsageDescription</key>
-	<string>This app uses Bluetooth to communicate with MeshCore devices.</string>
-	<key>NSBluetoothPeripheralUsageDescription</key>
-	<string>This app uses Bluetooth to communicate with MeshCore devices.</string>
-	<key>NSCameraUsageDescription</key>
-	<string>This app uses the camera to scan QR codes for joining communities.</string>
-	<key>LSApplicationQueriesSchemes</key>
-	<array>
-		<string>http</string>
-		<string>https</string>
-	</array>
 </dict>
 </plist>

lib/connector/meshcore_connector_usb.dart

@@ -19,6 +19,7 @@ class MeshCoreUsbManager {
   String? get activePortKey => _activePortKey;
   String? get activePortDisplayLabel => _activePortLabel ?? _activePortKey;
   bool get isConnected => _service.isConnected;
+  Object? get lastError => _service.lastError;
   Stream<Uint8List> get frameStream => _service.frameStream;
 
   // --- Configuration ---
@@ -64,6 +65,8 @@ class MeshCoreUsbManager {
 
   Future<void> write(Uint8List data) => _service.write(data);
 
+  Future<void> writeRaw(Uint8List data) => _service.writeRaw(data);
+
   // --- Label management ---
   void updateConnectedLabel(String selfName) {
     _service.updateConnectedLabel(selfName);

lib/connector/meshcore_protocol.dart

@@ -1,6 +1,8 @@
 import 'dart:convert';
 import 'dart:typed_data';
 
+import 'package:flutter/widgets.dart';
+
 // Buffer Reader - sequential binary data reader with pointer tracking
 class BufferReader {
   int _pointer = 0;
@@ -37,16 +39,6 @@ class BufferReader {
 
   Uint8List readRemainingBytes() => readBytes(remaining);
 
-  String readString() {
-    _lastPointer = _pointer;
-    final value = readRemainingBytes();
-    try {
-      return utf8.decode(Uint8List.fromList(value), allowMalformed: true);
-    } catch (e) {
-      return String.fromCharCodes(value); // Latin-1 fallback
-    }
-  }
-
   String readCStringGreedy(int maxLength) {
     _lastPointer = _pointer;
     final value = <int>[];
@@ -62,11 +54,12 @@ class BufferReader {
     }
   }
 
-  String readCString(int maxLength) {
+  String readCString({int maxLength = -1}) {
     final backupPointer = _pointer;
     final value = <int>[];
     int counter = 0;
-    while (counter < maxLength) {
+    final maxLen = maxLength >= 0 ? maxLength : remaining;
+    while (counter < maxLen) {
       final byte = readByte();
       if (byte == 0) break;
       value.add(byte);
@@ -209,17 +202,20 @@ const int cmdGetChannel = 31;
 const int cmdSetChannel = 32;
 const int cmdSendTracePath = 36;
 const int cmdSetOtherParams = 38;
-const int cmdSendAnonReq = 57;
-const int cmdGetTelemetryReq = 39;
+const int cmdSendTelemetryReq = 39;
 const int cmdGetCustomVar = 40;
 const int cmdSetCustomVar = 41;
 const int cmdSendBinaryReq = 50;
+const int cmdGetStats = 56;
+const int cmdSendAnonReq = 57;
 const int cmdSetAutoAddConfig = 58;
 const int cmdGetAutoAddConfig = 59;
+const int cmdSetPathHashMode = 61;
 
 // Text message types
 const int txtTypePlain = 0;
 const int txtTypeCliData = 1;
+const int txtTypeSigned = 2;
 
 // Repeater request types (for server requests)
 const int reqTypeGetStatus = 0x01;
@@ -228,6 +224,12 @@ const int reqTypeGetTelemetry = 0x03;
 const int reqTypeGetAccessList = 0x05;
 const int reqTypeGetNeighbors = 0x06;
 
+Uint8List buildTelemetryBinaryPayload() {
+  // Room servers/repeaters read byte 1 as an inverse telemetry permission mask.
+  // Zero means "request every telemetry field allowed for this contact".
+  return Uint8List.fromList([reqTypeGetTelemetry, 0x00, 0x00, 0x00, 0x00]);
+}
+
 // Repeater response codes
 const int respServerLoginOk = 0;
 
@@ -251,6 +253,11 @@ const int respCodeChannelMsgRecvV3 = 17;
 const int respCodeChannelInfo = 18;
 const int respCodeCustomVars = 21;
 const int respCodeAutoAddConfig = 25;
+const int respCodeStats = 24;
+
+const int statsTypeCore = 0;
+const int statsTypeRadio = 1;
+const int statsTypePackets = 2;
 
 // Push codes (async from device)
 const int pushCodeAdvert = 0x80;
@@ -272,6 +279,10 @@ const int advTypeRepeater = 2;
 const int advTypeRoom = 3;
 const int advTypeSensor = 4;
 
+const int teleModeDeny = 0;
+const int teleModeAllowFlags = 1; // use contact.flags
+const int teleModeAllowAll = 2;
+
 // Payload Types
 const int payloadTypeREQ =
     0x00; // request (prefixed with dest/src hashes, MAC) (enc data: timestamp, blob)
@@ -310,11 +321,12 @@ const int autoAddSensorFlag =
 
 // Sizes
 const int pubKeySize = 32;
+const int signatureSize = 64;
 const int maxPathSize = 64;
 const int pathHashSize = 1;
 const int maxNameSize = 32;
 const int maxFrameSize = 172;
-const int appProtocolVersion = 3;
+const int appProtocolVersion = 4;
 // Matches firmware MAX_TEXT_LEN (10 * CIPHER_BLOCK_SIZE).
 const int maxTextPayloadBytes = 160;
 const int _sendTextMsgOverheadBytes =
@@ -352,6 +364,9 @@ const int contactPubKeyOffset = 1;
 const int contactTypeOffset = 33;
 const int contactFlagsOffset = 34;
 const int contactFlagFavorite = 0x01;
+const int contactFlagTeleBase = 0x02; // 'base' permission includes battery
+const int contactFlagTeleLoc = 0x04;
+const int contactFlagTeleEnv = 0x08; //access environment sensors
 const int contactPathLenOffset = 35;
 const int contactPathOffset = 36;
 const int contactNameOffset = 100;
@@ -370,52 +385,44 @@ const int msgTextOffset = 38;
 class ParsedContactText {
   final Uint8List senderPrefix;
   final String text;
-
   const ParsedContactText({required this.senderPrefix, required this.text});
 }
 
 ParsedContactText? parseContactMessageText(Uint8List frame) {
   if (frame.isEmpty) return null;
-  final code = frame[0];
-  if (code != respCodeContactMsgRecv && code != respCodeContactMsgRecvV3) {
+
+  final message = BufferReader(frame);
+  try {
+    final code = message.readByte();
+    if (code != respCodeContactMsgRecv && code != respCodeContactMsgRecvV3) {
+      return null;
+    }
+
+    // Companion radio layout:
+    // [code][snr?][res?][res?][prefix x6][path_len][txt_type][timestamp x4][extra?][text...]
+    if (code == respCodeContactMsgRecvV3) {
+      // Skip SNR and reserved bytes in v3 layout
+      message.skipBytes(3);
+    }
+    final senderPrefix = message.readBytes(6); // public key
+    message.skipBytes(1); // path length
+    final textType = message.readByte();
+    message.skipBytes(4); // timestamp (4 bytes)
+
+    final shiftedType = textType >> 2;
+    final isSigned = shiftedType == txtTypeSigned || textType == txtTypeSigned;
+    if (isSigned) {
+      // Signed messages have a 4-byte signature after the timestamp, before the text
+      message.skipBytes(4);
+    }
+    final text = message.readCString();
+    if (text.isEmpty) return null;
+
+    return ParsedContactText(senderPrefix: senderPrefix, text: text);
+  } catch (e) {
+    debugPrint('Error parsing contact message text: $e');
     return null;
   }
-
-  // Companion radio layout:
-  // [code][snr?][res?][res?][prefix x6][path_len][txt_type][timestamp x4][extra?][text...]
-  final isV3 = code == respCodeContactMsgRecvV3;
-  final prefixOffset = isV3 ? 4 : 1;
-  const prefixLen = 6;
-  final txtTypeOffset = prefixOffset + prefixLen + 1;
-  final timestampOffset = txtTypeOffset + 1;
-  final baseTextOffset = timestampOffset + 4;
-  if (frame.length <= baseTextOffset) return null;
-
-  final flags = frame[txtTypeOffset];
-  final shiftedType = flags >> 2;
-  final rawType = flags;
-  final isPlain = shiftedType == txtTypePlain || rawType == txtTypePlain;
-  final isCli = shiftedType == txtTypeCliData || rawType == txtTypeCliData;
-  if (!isPlain && !isCli) {
-    return null;
-  }
-
-  var text = readCString(
-    frame,
-    baseTextOffset,
-    frame.length - baseTextOffset,
-  ).trim();
-  if (text.isEmpty && frame.length > baseTextOffset + 4) {
-    text = readCString(
-      frame,
-      baseTextOffset + 4,
-      frame.length - (baseTextOffset + 4),
-    ).trim();
-  }
-  if (text.isEmpty) return null;
-
-  final senderPrefix = frame.sublist(prefixOffset, prefixOffset + prefixLen);
-  return ParsedContactText(senderPrefix: senderPrefix, text: text);
 }
 
 // Helper to read uint32 little-endian
@@ -438,18 +445,9 @@ int readInt32LE(Uint8List data, int offset) {
   return val;
 }
 
-// Helper to read null-terminated UTF-8 string
-String readCString(Uint8List data, int offset, int maxLen) {
-  int end = offset;
-  while (end < offset + maxLen && end < data.length && data[end] != 0) {
-    end++;
-  }
-  try {
-    return utf8.decode(data.sublist(offset, end), allowMalformed: true);
-  } catch (e) {
-    // Fallback to Latin-1 if UTF-8 decoding fails
-    return String.fromCharCodes(data.sublist(offset, end));
-  }
+// Helper to convert uint32 to hex string
+String ackHashToHex(int ackHash) {
+  return ackHash.toRadixString(16).padLeft(8, '0');
 }
 
 // Helper to convert public key to hex string
@@ -459,8 +457,13 @@ String pubKeyToHex(Uint8List pubKey) {
 
 // Helper to convert hex string to public key
 Uint8List hexToPubKey(String hex) {
+  if (hex.length != pubKeySize * 2) {
+    throw FormatException(
+      'Public key hex must be ${pubKeySize * 2} chars, got ${hex.length}',
+    );
+  }
   final result = Uint8List(pubKeySize);
-  for (int i = 0; i < pubKeySize && i * 2 + 1 < hex.length; i++) {
+  for (int i = 0; i < pubKeySize; i++) {
     result[i] = int.parse(hex.substring(i * 2, i * 2 + 2), radix: 16);
   }
   return result;
@@ -509,7 +512,7 @@ Uint8List buildSendTextMsgFrame(
   final writer = BufferWriter();
   writer.writeByte(cmdSendTxtMsg);
   writer.writeByte(txtTypePlain);
-  writer.writeByte(attempt.clamp(0, 3));
+  writer.writeByte(attempt.clamp(0, 255));
   writer.writeUInt32LE(timestamp);
   writer.writeBytes(recipientPubKey.sublist(0, 6));
   writer.writeString(text);
@@ -569,6 +572,17 @@ Uint8List buildGetBattAndStorageFrame() {
   return Uint8List.fromList([cmdGetBattAndStorage]);
 }
 
+/// Companion radio stats: [56][statsType] where statsType is statsTypeCore/Radio/Packets.
+Uint8List buildGetStatsFrame(int statsType) {
+  return Uint8List.fromList([cmdGetStats, statsType & 0xFF]);
+}
+
+/// Path hash width on air: [61][0][mode], mode 0..2 → (mode+1) bytes per hop hash.
+Uint8List buildSetPathHashModeFrame(int mode) {
+  final m = mode.clamp(0, 2);
+  return Uint8List.fromList([cmdSetPathHashMode, 0, m]);
+}
+
 // Build CMD_SET_DEVICE_TIME frame
 Uint8List buildSetDeviceTimeFrame(int timestamp) {
   final writer = BufferWriter();
@@ -717,25 +731,19 @@ Uint8List buildUpdateContactPathFrame(
   final timestamp = DateTime.now().millisecondsSinceEpoch ~/ 1000;
   writer.writeUInt32LE(timestamp);
 
-  if ((lat == null || lon == null) && lastModified != null) {
-    // If lat/lon not provided, write zeros
-    writer.writeInt32LE(0);
-    writer.writeInt32LE(0);
-  } else {
-    // Latitude and Longitude are expected in degrees, convert to int by multiplying by 1e6
-    // Latitude
-    final latitude = lat ?? 0.0;
-    writer.writeInt32LE((latitude * 1e6).round());
-
-    // Longitude
-    final longitude = lon ?? 0.0;
-    writer.writeInt32LE((longitude * 1e6).round());
-  }
-
-  if (lastModified != null) {
-    // Last modified
-    final lastModifiedTimestamp = lastModified.millisecondsSinceEpoch ~/ 1000;
-    writer.writeUInt32LE(lastModifiedTimestamp);
+  // Optional [Lat x4, Lon x4][timestamp x4] tail per the doc comment above.
+  // Emit 8 bytes of position (zero-filled when only lastModified is provided)
+  // followed by an optional 4-byte timestamp. Earlier code emitted the
+  // position block twice, which corrupted the tail and caused the firmware
+  // to parse the second lat as the timestamp. See #427.
+  final hasLocation = lat != null && lon != null;
+  if (hasLocation || lastModified != null) {
+    writer.writeInt32LE(hasLocation ? (lat * 1e6).round() : 0);
+    writer.writeInt32LE(hasLocation ? (lon * 1e6).round() : 0);
+    if (lastModified != null) {
+      final lastModifiedTimestamp = lastModified.millisecondsSinceEpoch ~/ 1000;
+      writer.writeUInt32LE(lastModifiedTimestamp);
+    }
   }
 
   return writer.toBytes();
@@ -838,7 +846,7 @@ Uint8List buildSendCliCommandFrame(
   final writer = BufferWriter();
   writer.writeByte(cmdSendTxtMsg);
   writer.writeByte(txtTypeCliData);
-  writer.writeByte(attempt.clamp(0, 3));
+  writer.writeByte(attempt.clamp(0, 255));
   writer.writeUInt32LE(timestamp);
   writer.writeBytes(repeaterPubKey.sublist(0, 6));
   writer.writeString(command);
@@ -937,3 +945,18 @@ Uint8List buildSetAutoAddConfigFrame({
   writer.writeByte(flags);
   return writer.toBytes();
 }
+
+//Build CMD_SEND_TELEMETRY_REQ
+// Format: [cmd][reserved x3][pub_key? x32]
+Uint8List buildSendTelemetryReq(Uint8List? pubKey) {
+  final writer = BufferWriter();
+  writer.writeByte(cmdSendTelemetryReq);
+
+  if (pubKey != null && pubKey.length == pubKeySize) {
+    writer.writeBytes(Uint8List(3)); // reserved bytes
+    writer.writeBytes(pubKey);
+  } else {
+    writer.writeBytes(Uint8List(3)); // reserved bytes
+  }
+  return writer.toBytes();
+}

lib/connector/meshcore_uuids.dart

@@ -0,0 +1,20 @@
+class MeshCoreUuids {
+  static const String service = "6e400001-b5a3-f393-e0a9-e50e24dcca9e";
+  static const String rxCharacteristic = "6e400002-b5a3-f393-e0a9-e50e24dcca9e";
+  static const String txCharacteristic = "6e400003-b5a3-f393-e0a9-e50e24dcca9e";
+
+  /// Known advertised-name prefixes used by stock MeshCore firmware builds.
+  /// Discovery no longer filters on these (it filters on the [service] UUID so
+  /// that community forks with custom names are still found); kept for
+  /// reference and possible future display heuristics.
+  static const List<String> deviceNamePrefixes = [
+    "MeshCore-",
+    "Whisper-",
+    "WisCore-",
+    "Seeed",
+    "Lilygo",
+    "HT-",
+    "LowMesh_MC_",
+    "NRF52",
+  ];
+}

lib/helpers/cayenne_lpp.dart

@@ -96,6 +96,34 @@ class CayenneLpp {
         }
 
         switch (type) {
+          case lppDigitalInput:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt8(),
+            });
+            break;
+          case lppDigitalOutput:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt8(),
+            });
+            break;
+          case lppAnalogInput:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readInt16BE() / 100,
+            });
+            break;
+          case lppAnalogOutput:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readInt16BE() / 100,
+            });
+            break;
           case lppGenericSensor:
             telemetry.add({
               'channel': channel,
@@ -131,6 +159,17 @@ class CayenneLpp {
               'value': buffer.readUInt8() / 2,
             });
             break;
+          case lppAccelerometer:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': {
+                'x': buffer.readInt16BE() / 1000,
+                'y': buffer.readInt16BE() / 1000,
+                'z': buffer.readInt16BE() / 1000,
+              },
+            });
+            break;
           case lppBarometricPressure:
             telemetry.add({
               'channel': channel,
@@ -138,6 +177,13 @@ class CayenneLpp {
               'value': buffer.readUInt16BE() / 10,
             });
             break;
+          case lppAltitude:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readInt16BE(),
+            });
+            break;
           case lppVoltage:
             telemetry.add({
               'channel': channel,
@@ -152,6 +198,13 @@ class CayenneLpp {
               'value': buffer.readInt16BE() / 1000,
             });
             break;
+          case lppFrequency:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt32BE(),
+            });
+            break;
           case lppPercentage:
             telemetry.add({
               'channel': channel,
@@ -173,6 +226,56 @@ class CayenneLpp {
               'value': buffer.readUInt16BE(),
             });
             break;
+          case lppDistance:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt32BE() / 1000,
+            });
+            break;
+          case lppEnergy:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt32BE() / 1000,
+            });
+            break;
+          case lppDirection:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt16BE(),
+            });
+            break;
+          case lppUnixTime:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt32BE(),
+            });
+            break;
+          case lppGyrometer:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': {
+                'x': buffer.readInt16BE() / 100,
+                'y': buffer.readInt16BE() / 100,
+                'z': buffer.readInt16BE() / 100,
+              },
+            });
+            break;
+          case lppColour:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': {
+                'red': buffer.readUInt8(),
+                'green': buffer.readUInt8(),
+                'blue': buffer.readUInt8(),
+              },
+            });
+            break;
           case lppGps:
             telemetry.add({
               'channel': channel,
@@ -184,6 +287,24 @@ class CayenneLpp {
               },
             });
             break;
+          case lppSwitch:
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': buffer.readUInt8(),
+            });
+            break;
+          case lppPolyline:
+            final size = buffer.readUInt8();
+            telemetry.add({
+              'channel': channel,
+              'type': type,
+              'value': {
+                'size': size,
+                'data': _bytesToHex(_readPolylinePayload(buffer, size)),
+              },
+            });
+            break;
           default:
             return telemetry;
         }
@@ -216,6 +337,19 @@ class CayenneLpp {
         );
 
         switch (type) {
+          case lppDigitalInput:
+            channelData['values']['digitalInput'] = buffer.readUInt8();
+            break;
+          case lppDigitalOutput:
+            channelData['values']['digitalOutput'] = buffer.readUInt8();
+            break;
+          case lppAnalogInput:
+            channelData['values']['analogInput'] = buffer.readInt16BE() / 100.0;
+            break;
+          case lppAnalogOutput:
+            channelData['values']['analogOutput'] =
+                buffer.readInt16BE() / 100.0;
+            break;
           case lppGenericSensor:
             channelData['values']['generic'] = buffer.readUInt32BE();
             break;
@@ -231,15 +365,29 @@ class CayenneLpp {
           case lppRelativeHumidity:
             channelData['values']['humidity'] = buffer.readUInt8() / 2.0;
             break;
+          case lppAccelerometer:
+            channelData['values']['accelerometer'] = {
+              'x': buffer.readInt16BE() / 1000.0,
+              'y': buffer.readInt16BE() / 1000.0,
+              'z': buffer.readInt16BE() / 1000.0,
+            };
+            break;
           case lppBarometricPressure:
             channelData['values']['pressure'] = buffer.readUInt16BE() / 10.0;
             break;
+          case lppAltitude:
+            // MeshCore encodes standalone barometric altitude as LPP type 121.
+            channelData['values']['altitude'] = buffer.readInt16BE();
+            break;
           case lppVoltage:
             channelData['values']['voltage'] = buffer.readInt16BE() / 100.0;
             break;
           case lppCurrent:
             channelData['values']['current'] = buffer.readInt16BE() / 1000.0;
             break;
+          case lppFrequency:
+            channelData['values']['frequency'] = buffer.readUInt32BE();
+            break;
           case lppPercentage:
             channelData['values']['percentage'] = buffer.readUInt8();
             break;
@@ -249,6 +397,32 @@ class CayenneLpp {
           case lppPower:
             channelData['values']['power'] = buffer.readUInt16BE();
             break;
+          case lppDistance:
+            channelData['values']['distance'] = buffer.readUInt32BE() / 1000.0;
+            break;
+          case lppEnergy:
+            channelData['values']['energy'] = buffer.readUInt32BE() / 1000.0;
+            break;
+          case lppDirection:
+            channelData['values']['direction'] = buffer.readUInt16BE();
+            break;
+          case lppUnixTime:
+            channelData['values']['time'] = buffer.readUInt32BE();
+            break;
+          case lppGyrometer:
+            channelData['values']['gyrometer'] = {
+              'x': buffer.readInt16BE() / 100.0,
+              'y': buffer.readInt16BE() / 100.0,
+              'z': buffer.readInt16BE() / 100.0,
+            };
+            break;
+          case lppColour:
+            channelData['values']['colour'] = {
+              'red': buffer.readUInt8(),
+              'green': buffer.readUInt8(),
+              'blue': buffer.readUInt8(),
+            };
+            break;
           case lppGps:
             channelData['values']['gps'] = {
               'latitude': buffer.readInt24BE() / 10000.0,
@@ -256,22 +430,48 @@ class CayenneLpp {
               'altitude': buffer.readInt24BE() / 100.0,
             };
             break;
-          // Add more types as needed...
+          case lppSwitch:
+            channelData['values']['switch'] = buffer.readUInt8() != 0;
+            break;
+          case lppPolyline:
+            final size = buffer.readUInt8();
+            channelData['values']['polyline'] = {
+              'size': size,
+              'data': _bytesToHex(_readPolylinePayload(buffer, size)),
+            };
+            break;
           default:
-            //Stopped parsing to avoid misalignment
-            return channels.values.toList();
+            // Stop parsing to avoid losing alignment on an unknown LPP type.
+            return _sortedChannelValues(channels);
         }
       }
 
-      final List<Map<String, dynamic>> channelsOut = channels.values.toList();
-      channelsOut.sort((a, b) => a['channel'].compareTo(b['channel']));
-      return channelsOut;
+      return _sortedChannelValues(channels);
     } catch (e) {
       // Handle parsing errors, possibly due to malformed data
       appLogger.error('Error parsing Cayenne LPP data: $e');
-      return <
-        Map<String, dynamic>
-      >[]; // Return an empty list on error to avoid crashing the app
+      // Preserve any fields parsed before the malformed value.
+      return _sortedChannelValues(channels);
     }
   }
+
+  static Uint8List _readPolylinePayload(BufferReader buffer, int size) {
+    final declaredPayloadSize = size > 0 ? size - 1 : 0;
+    final availablePayloadSize = declaredPayloadSize <= buffer.remaining
+        ? declaredPayloadSize
+        : buffer.remaining;
+    return buffer.readBytes(availablePayloadSize);
+  }
+
+  static List<Map<String, dynamic>> _sortedChannelValues(
+    Map<int, Map<String, dynamic>> channels,
+  ) {
+    final channelsOut = channels.values.toList();
+    channelsOut.sort((a, b) => a['channel'].compareTo(b['channel']));
+    return channelsOut;
+  }
+
+  static String _bytesToHex(Uint8List bytes) {
+    return bytes.map((b) => b.toRadixString(16).padLeft(2, '0')).join();
+  }
 }

lib/helpers/chat_scroll_controller.dart

@@ -49,6 +49,25 @@ class ChatScrollController extends ScrollController {
     }
   }
 
+  /// Jumps toward an off-screen message so that lazy ListView.builder builds
+  /// items near it. Only visible + cacheExtent items have real heights, so we
+  /// use proportion of maxScrollExtent (itself an estimate from built items'
+  /// avg height). Call [onJumped] on the next frame to ensureVisible/scroll
+  /// to the exact target.
+  void jumpToEstimatedOffset({
+    required int unreadCount,
+    required int totalMessages,
+    required VoidCallback onJumped,
+  }) {
+    if (!hasClients || totalMessages == 0) return;
+    final maxExtent = position.maxScrollExtent;
+    final jumpOffset = maxExtent * (unreadCount / totalMessages);
+    if (jumpOffset > 100) {
+      jumpTo(jumpOffset);
+    }
+    WidgetsBinding.instance.addPostFrameCallback((_) => onJumped());
+  }
+
   void scrollToBottomIfAtBottom() {
     // Only scroll if jump button is NOT showing (i.e., already at bottom)
     if (!showJumpToBottom.value && hasClients && position.maxScrollExtent > 0) {

lib/helpers/contact_ui.dart

@@ -0,0 +1,59 @@
+import 'package:flutter/material.dart';
+
+import '../connector/meshcore_protocol.dart';
+import '../utils/emoji_utils.dart';
+
+IconData contactTypeIcon(int type) {
+  switch (type) {
+    case advTypeChat:
+      return Icons.chat;
+    case advTypeRepeater:
+      return Icons.cell_tower;
+    case advTypeRoom:
+      return Icons.group;
+    case advTypeSensor:
+      return Icons.sensors;
+    default:
+      return Icons.device_unknown;
+  }
+}
+
+Color contactTypeColor(int type) {
+  switch (type) {
+    case advTypeChat:
+      return Colors.blue;
+    case advTypeRepeater:
+      return Colors.orange;
+    case advTypeRoom:
+      return Colors.purple;
+    case advTypeSensor:
+      return Colors.green;
+    default:
+      return Colors.grey;
+  }
+}
+
+Color colorForName(String name) {
+  const colors = [
+    Colors.blue,
+    Colors.green,
+    Colors.orange,
+    Colors.purple,
+    Colors.pink,
+    Colors.teal,
+    Colors.indigo,
+    Colors.cyan,
+    Colors.amber,
+    Colors.deepOrange,
+  ];
+  return colors[name.hashCode.abs() % colors.length];
+}
+
+String firstCharacterOrEmoji(String name) {
+  if (name.isEmpty) return '?';
+  final emoji = firstEmoji(name);
+  if (emoji != null) return emoji;
+  final runes = name.runes.toList();
+  if (runes.isEmpty) return '?';
+  return String.fromCharCode(runes[0]).toUpperCase();
+}

lib/helpers/cyr2lat.dart

@@ -0,0 +1,63 @@
+class Cyr2Lat {
+  static Map<String, String> _charMap = {
+    'А': 'A',
+    'В': 'B',
+    'Е': 'E',
+    'Ё': 'E',
+    'З': '3',
+    'К': 'K',
+    'М': 'M',
+    'Н': 'H',
+    'О': 'O',
+    'Р': 'P',
+    'С': 'C',
+    'Т': 'T',
+    'Х': 'X',
+    'Ь': 'b',
+    'а': 'a',
+    'е': 'e',
+    'ё': 'e',
+    'о': 'o',
+    'р': 'p',
+    'с': 'c',
+    'у': 'y',
+    'х': 'x',
+  };
+
+  static final RegExp _prefixRegExp = RegExp(r'\@\[[\S\s]+\] ');
+
+  static void setCharMap(Map<String, String> charMap) {
+    _charMap = Map.from(charMap);
+  }
+
+  static String encode(String text) {
+    if (text.isEmpty) return text;
+    final buffer = StringBuffer();
+
+    final senderName = extractSenderName(text);
+    final msgText = removeSenderName(text);
+
+    for (final rune in msgText.runes) {
+      final char = String.fromCharCode(rune);
+      buffer.write(_charMap[char] ?? char);
+    }
+
+    return senderName + buffer.toString();
+  }
+
+  static String removeSenderName(String text) {
+    final match = _prefixRegExp.matchAsPrefix(text);
+    if (match != null) {
+      return text.substring(match.end);
+    }
+    return text;
+  }
+
+  static String extractSenderName(String text) {
+    final match = _prefixRegExp.matchAsPrefix(text);
+    if (match != null) {
+      return match.group(0) ?? '';
+    }
+    return '';
+  }
+}

lib/helpers/gif_helper.dart

@@ -0,0 +1,38 @@
+class GifHelper {
+  /// Parse a known GIF format, which can be any of:
+  /// g:GIFID
+  /// https://media.giphy.com/media/GIFID/giphy.gif
+  /// https://giphy.com/gifs/Optional-title-with-dashes-GIFID
+  ///
+  /// GIFID is a Giphy GIF ID. The https:// is optional (and
+  /// can also be http://). The giphy.com/gifs form can also
+  /// include a trailing slash.
+  ///
+  /// Returns null if text is not a valid GIF format
+  static String? parseGif(String text) {
+    final trimmed = text.trim();
+    final match = RegExp(r'^g:([A-Za-z0-9_-]+)$').firstMatch(trimmed);
+    if (match != null) {
+      return match.group(1);
+    }
+    final directUrlMatch = RegExp(
+      r'^(?:https?:\/\/)?media\.giphy\.com\/media\/([A-Za-z0-9_-]+)\/giphy\.gif$',
+    ).firstMatch(trimmed);
+    if (directUrlMatch != null) {
+      return directUrlMatch.group(1);
+    }
+    // Giphy understands page URLs with just the ID, or any string and a
+    // dash before the ID, and redirects to a page with a dash-separated
+    // title, a dash, and the ID. IDs in this form *probably* can't
+    // contain dashes.
+    final pageMatch = RegExp(
+      r'^(?:https?:\/\/)?giphy\.com\/gifs\/(?:[^/?]*-)?([A-Za-z0-9_]+)\/?$',
+    ).firstMatch(trimmed);
+    return pageMatch?.group(1);
+  }
+
+  /// Encode a GIF in a format that parseGif() can parse.
+  static String encodeGif(String gifId) {
+    return 'g:$gifId';
+  }
+}

lib/helpers/link_handler.dart

@@ -1,8 +1,51 @@
 import 'package:flutter/material.dart';
+import 'package:flutter_linkify/flutter_linkify.dart';
 import 'package:url_launcher/url_launcher.dart';
 import '../l10n/l10n.dart';
+import '../utils/platform_info.dart';
+import '../helpers/snack_bar_builder.dart';
 
 class LinkHandler {
+  static TextStyle defaultLinkStyle(BuildContext context, TextStyle base) {
+    final brightness = Theme.of(context).brightness;
+    final orange = brightness == Brightness.dark
+        ? const Color(0xFFFFB74D)
+        : const Color(0xFFE65100);
+    return base.copyWith(color: orange, decoration: TextDecoration.underline);
+  }
+
+  /// Returns a [SelectableLinkify] on desktop or a [Linkify] on mobile.
+  static Widget buildLinkifyText({
+    required BuildContext context,
+    required String text,
+    required TextStyle style,
+    TextStyle? linkStyle,
+  }) {
+    final effectiveLinkStyle = linkStyle ?? defaultLinkStyle(context, style);
+    const options = LinkifyOptions(humanize: false, defaultToHttps: false);
+    const linkifiers = [UrlLinkifier(), EmailLinkifier()];
+    void onOpen(LinkableElement link) => handleLinkTap(context, link.url);
+
+    if (PlatformInfo.isDesktop) {
+      return SelectableLinkify(
+        text: text,
+        style: style,
+        linkStyle: effectiveLinkStyle,
+        options: options,
+        linkifiers: linkifiers,
+        onOpen: onOpen,
+      );
+    }
+    return Linkify(
+      text: text,
+      style: style,
+      linkStyle: effectiveLinkStyle,
+      options: options,
+      linkifiers: linkifiers,
+      onOpen: onOpen,
+    );
+  }
+
   static Future<void> handleLinkTap(BuildContext context, String url) async {
     // Show confirmation dialog
     final shouldOpen = await showDialog<bool>(
@@ -51,21 +94,19 @@ class LinkHandler {
       final uri = Uri.parse(url);
       if (!await launchUrl(uri, mode: LaunchMode.externalApplication)) {
         if (context.mounted) {
-          ScaffoldMessenger.of(context).showSnackBar(
-            SnackBar(
-              content: Text(context.l10n.chat_couldNotOpenLink(url)),
-              backgroundColor: Colors.red,
-            ),
+          showDismissibleSnackBar(
+            context,
+            content: Text(context.l10n.chat_couldNotOpenLink(url)),
+            backgroundColor: Colors.red,
           );
         }
       }
     } catch (e) {
       if (context.mounted) {
-        ScaffoldMessenger.of(context).showSnackBar(
-          SnackBar(
-            content: Text(context.l10n.chat_invalidLink),
-            backgroundColor: Colors.red,
-          ),
+        showDismissibleSnackBar(
+          context,
+          content: Text(context.l10n.chat_invalidLink),
+          backgroundColor: Colors.red,
         );
       }
     }

lib/helpers/path_helper.dart

@@ -0,0 +1,36 @@
+import '../models/contact.dart';
+import '../connector/meshcore_protocol.dart';
+
+class PathHelper {
+  static String formatPathHex(List<int> pathBytes) {
+    return pathBytes
+        .map((b) => b.toRadixString(16).padLeft(2, '0').toUpperCase())
+        .join(',');
+  }
+
+  static String hopHex(int byte) {
+    return byte.toRadixString(16).padLeft(2, '0').toUpperCase();
+  }
+
+  static String? hopName(int byte, List<Contact> allContacts) {
+    final matches = allContacts
+        .where(
+          (c) =>
+              c.publicKey.first == byte &&
+              (c.type == advTypeRepeater || c.type == advTypeRoom),
+        )
+        .toList();
+    if (matches.isEmpty) return null;
+    if (matches.length == 1) return matches.first.name;
+    return matches.map((c) => c.name).join(' | ');
+  }
+
+  static String resolvePathNames(
+    List<int> pathBytes,
+    List<Contact> allContacts,
+  ) {
+    return pathBytes
+        .map((b) => hopName(b, allContacts) ?? hopHex(b))
+        .join(' \u2192 ');
+  }
+}

lib/helpers/path_hop_resolver.dart

@@ -0,0 +1,70 @@
+import 'package:latlong2/latlong.dart';
+
+import '../connector/meshcore_protocol.dart';
+import '../models/contact.dart';
+
+class PathHopResolver {
+  const PathHopResolver._();
+
+  static List<Contact?> resolve({
+    required List<int> pathBytes,
+    required List<Contact> contacts,
+    LatLng? endpoint,
+    bool resolveFromEnd = false,
+  }) {
+    final candidatesByPrefix = <int, List<Contact>>{};
+    for (final contact in contacts) {
+      if (contact.publicKey.isEmpty) continue;
+      if (contact.type != advTypeRepeater && contact.type != advTypeRoom) {
+        continue;
+      }
+      candidatesByPrefix
+          .putIfAbsent(contact.publicKey.first, () => <Contact>[])
+          .add(contact);
+    }
+    for (final candidates in candidatesByPrefix.values) {
+      candidates.sort((a, b) => b.lastSeen.compareTo(a.lastSeen));
+    }
+
+    final resolved = List<Contact?>.filled(pathBytes.length, null);
+    final indexes = resolveFromEnd
+        ? List<int>.generate(pathBytes.length, (i) => pathBytes.length - 1 - i)
+        : List<int>.generate(pathBytes.length, (i) => i);
+    final distance = Distance();
+    var previousPosition = endpoint;
+
+    for (final index in indexes) {
+      final candidates = candidatesByPrefix[pathBytes[index]];
+      if (candidates == null || candidates.isEmpty) continue;
+
+      var bestIndex = 0;
+      if (previousPosition != null && candidates.length > 1) {
+        double? nearestDistance;
+        for (var i = 0; i < candidates.length; i++) {
+          final position = _positionOf(candidates[i]);
+          if (position == null) continue;
+          final candidateDistance = distance(previousPosition, position);
+          if (nearestDistance == null || candidateDistance < nearestDistance) {
+            nearestDistance = candidateDistance;
+            bestIndex = i;
+          }
+        }
+      }
+
+      final contact = candidates.removeAt(bestIndex);
+      resolved[index] = contact;
+      previousPosition = _positionOf(contact) ?? previousPosition;
+    }
+
+    return resolved;
+  }
+
+  static LatLng? _positionOf(Contact contact) {
+    if (!contact.hasLocation ||
+        contact.latitude == null ||
+        contact.longitude == null) {
+      return null;
+    }
+    return LatLng(contact.latitude!, contact.longitude!);
+  }
+}

lib/helpers/reaction_helper.dart

@@ -8,6 +8,50 @@ class ReactionInfo {
 }
 
 class ReactionHelper {
+  /// Apply a reaction to a list of messages by matching the reaction hash.
+  ///
+  /// [messages] - the message list to search
+  /// [reactionInfo] - the parsed reaction
+  /// [getTimestampSecs] - extract timestamp seconds from a message
+  /// [getSenderName] - extract sender name for hash (null for 1:1 implicit)
+  /// [getMessageText] - extract message text
+  /// [getReactions] - extract current reactions map
+  /// [shouldSkip] - filter function to skip messages (e.g., skip outgoing for incoming reactions)
+  /// [updateMessage] - callback to update the message at index with new reactions
+  ///
+  /// Returns whether a match was found.
+  static bool applyReaction<T>({
+    required List<T> messages,
+    required ReactionInfo reactionInfo,
+    required int Function(T) getTimestampSecs,
+    required String? Function(T) getSenderName,
+    required String Function(T) getMessageText,
+    required Map<String, int> Function(T) getReactions,
+    required bool Function(T) shouldSkip,
+    required void Function(int index, Map<String, int> newReactions)
+    updateMessage,
+  }) {
+    final targetHash = reactionInfo.targetHash;
+    for (int i = messages.length - 1; i >= 0; i--) {
+      final msg = messages[i];
+      if (shouldSkip(msg)) continue;
+
+      final msgHash = computeReactionHash(
+        getTimestampSecs(msg),
+        getSenderName(msg),
+        getMessageText(msg),
+      );
+      if (msgHash == targetHash) {
+        final currentReactions = Map<String, int>.from(getReactions(msg));
+        currentReactions[reactionInfo.emoji] =
+            (currentReactions[reactionInfo.emoji] ?? 0) + 1;
+        updateMessage(i, currentReactions);
+        return true;
+      }
+    }
+    return false;
+  }
+
   static List<String>? _cachedEmojis;
 
   /// Combined list of all reaction emojis in fixed order.
@@ -65,4 +109,9 @@ class ReactionHelper {
 
     return ReactionInfo(targetHash: match.group(1)!, emoji: emoji);
   }
+
+  /// Encode a reaction message that parseReaction() can parse.
+  static String encodeReaction(String hash, String emojiIndex) {
+    return 'r:$hash:$emojiIndex';
+  }
 }

lib/helpers/snack_bar_builder.dart

@@ -0,0 +1,68 @@
+import 'package:flutter/material.dart';
+
+// showDismissibleSnackBar shows  a [SnackBar] with tap to dismiss
+// all other properties are default and optional
+void showDismissibleSnackBar(
+  BuildContext context, {
+  Key? key,
+  required Widget content,
+  Color? backgroundColor,
+  double? elevation,
+  EdgeInsetsGeometry? margin,
+  EdgeInsetsGeometry? padding,
+  double? width,
+  ShapeBorder? shape,
+  HitTestBehavior? hitTestBehavior,
+  SnackBarBehavior? behavior,
+  SnackBarAction? action,
+  double? actionOverflowThreshold,
+  bool? showCloseIcon,
+  Color? closeIconColor,
+  Duration? duration,
+  bool? persist,
+  Animation<double>? animation,
+  void Function()? onVisible,
+  DismissDirection? dismissDirection,
+  Clip? clipBehavior,
+}) {
+  // Callers often reach here after an async gap; the context may already be
+  // unmounted, or deactivated (popped but not yet disposed) — ancestor
+  // lookups on a deactivated element throw. Showing nothing is the right
+  // outcome in both cases.
+  if (!context.mounted) return;
+  var isActive = true;
+  assert(() {
+    isActive = (context as Element).debugIsActive;
+    return true;
+  }());
+  if (!isActive) return;
+  final messenger = ScaffoldMessenger.maybeOf(context);
+  if (messenger == null) return;
+  messenger.showSnackBar(
+    SnackBar(
+      key: key,
+      content: GestureDetector(
+        onTap: () => messenger.hideCurrentSnackBar(),
+        child: content,
+      ),
+      backgroundColor: backgroundColor,
+      elevation: elevation,
+      margin: margin,
+      padding: padding,
+      width: width,
+      shape: shape,
+      hitTestBehavior: hitTestBehavior,
+      behavior: behavior,
+      action: action,
+      actionOverflowThreshold: actionOverflowThreshold,
+      showCloseIcon: showCloseIcon,
+      closeIconColor: closeIconColor,
+      duration: duration ?? const Duration(seconds: 4),
+      persist: persist,
+      animation: animation,
+      onVisible: onVisible,
+      dismissDirection: dismissDirection ?? DismissDirection.down,
+      clipBehavior: clipBehavior ?? Clip.hardEdge,
+    ),
+  );
+}

lib/helpers/utf8_length_limiter.dart

@@ -4,8 +4,14 @@ import 'package:flutter/services.dart';
 
 class Utf8LengthLimitingTextInputFormatter extends TextInputFormatter {
   final int maxBytes;
+  final String Function(String)? encoder;
 
-  const Utf8LengthLimitingTextInputFormatter(this.maxBytes);
+  const Utf8LengthLimitingTextInputFormatter(this.maxBytes, {this.encoder});
+
+  int _effectiveByteLength(String text) {
+    final effective = encoder != null ? encoder!(text) : text;
+    return utf8.encode(effective).length;
+  }
 
   @override
   TextEditingValue formatEditUpdate(
@@ -13,8 +19,7 @@ class Utf8LengthLimitingTextInputFormatter extends TextInputFormatter {
     TextEditingValue newValue,
   ) {
     if (maxBytes <= 0) return oldValue;
-    final bytes = utf8.encode(newValue.text);
-    if (bytes.length <= maxBytes) return newValue;
+    if (_effectiveByteLength(newValue.text) <= maxBytes) return newValue;
 
     final truncated = _truncateToMaxBytes(newValue.text, maxBytes);
     return TextEditingValue(
@@ -25,6 +30,14 @@ class Utf8LengthLimitingTextInputFormatter extends TextInputFormatter {
   }
 
   String _truncateToMaxBytes(String text, int limit) {
+    if (encoder != null) {
+      final runes = text.runes.toList();
+      while (runes.isNotEmpty &&
+          _effectiveByteLength(String.fromCharCodes(runes)) > maxBytes) {
+        runes.removeLast();
+      }
+      return String.fromCharCodes(runes);
+    }
     final buffer = StringBuffer();
     var used = 0;
     for (final rune in text.runes) {

lib/l10n/app_bg.arb

@@ -33,6 +33,8 @@
   "common_remove": "Изтрий",
   "common_enable": "Активирай",
   "common_disable": "Деактивирай",
+  "common_autoRefresh": "Автоматично обновяване",
+  "common_interval": "Интервал",
   "common_reboot": "Рестартирай",
   "common_loading": "Зареждане...",
   "common_notAvailable": "—",
@@ -52,7 +54,7 @@
       }
     }
   },
-  "scanner_title": "MeshCore Open",
+  "scanner_title": "MeshCore – Отворена версия",
   "scanner_scanning": "Сканиране за устройства...",
   "scanner_connecting": "Свързвам се...",
   "scanner_disconnecting": "Изключване...",
@@ -104,6 +106,8 @@
   "settings_privacyModeEnabled": "Режим на поверителност е активиран",
   "settings_privacyModeDisabled": "Режим на поверителност е деактивиран",
   "settings_actions": "Действия",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "Изпрати Реклама",
   "settings_sendAdvertisementSubtitle": "Сега присъствие в ефир",
   "settings_advertisementSent": "Реклама изпратена",
@@ -121,7 +125,7 @@
   "settings_appDebugLog": "Лог на отстраняване на грешки на приложението",
   "settings_appDebugLogSubtitle": "Съобщения за отстраняване на грешки на приложението",
   "settings_about": "За нас",
-  "settings_aboutVersion": "MeshCore Open v{version}",
+  "settings_aboutVersion": "MeshCore Open, версия {version}",
   "@settings_aboutVersion": {
     "placeholders": {
       "version": {
@@ -140,7 +144,7 @@
   "settings_infoChannelCount": "Брой канали",
   "settings_presets": "Предварителни настройки",
   "settings_frequency": "Честота (MHz)",
-  "settings_frequencyHelper": "300.0 - 2500.0",
+  "settings_frequencyHelper": "300,0 – 2500,0",
   "settings_frequencyInvalid": "Невалидна честота (300-2500 MHz)",
   "settings_bandwidth": "Ширина на честотния спектър",
   "settings_spreadingFactor": "Фактор на разпространение",
@@ -164,18 +168,18 @@
   "appSettings_themeDark": "Тъмно",
   "appSettings_language": "Език",
   "appSettings_languageSystem": "Система по подразбиране",
-  "appSettings_languageEn": "English",
-  "appSettings_languageFr": "Français",
-  "appSettings_languageEs": "Español",
-  "appSettings_languageDe": "Deutsch",
-  "appSettings_languagePl": "Polski",
-  "appSettings_languageSl": "Slovenščina",
-  "appSettings_languagePt": "Português",
-  "appSettings_languageIt": "Italiano",
-  "appSettings_languageZh": "中文",
-  "appSettings_languageSv": "Svenska",
-  "appSettings_languageNl": "Nederlands",
-  "appSettings_languageSk": "Slovenčina",
+  "appSettings_languageEn": "Английски",
+  "appSettings_languageFr": "Френски",
+  "appSettings_languageEs": "Испански",
+  "appSettings_languageDe": "Немски",
+  "appSettings_languagePl": "Полски",
+  "appSettings_languageSl": "Словенски език",
+  "appSettings_languagePt": "Португалски",
+  "appSettings_languageIt": "Италиански",
+  "appSettings_languageZh": "Китайски",
+  "appSettings_languageSv": "Шведски",
+  "appSettings_languageNl": "Хололандски",
+  "appSettings_languageSk": "Словенски",
   "appSettings_languageBg": "Български",
   "appSettings_notifications": "Уведомления",
   "appSettings_enableNotifications": "Активирай Известия",
@@ -285,6 +289,7 @@
   "contacts_newGroup": "Нова група",
   "contacts_groupName": "Група",
   "contacts_groupNameRequired": "Името на групата е задължително.",
+  "contacts_groupNameReserved": "Това име на група е запазено",
   "contacts_groupAlreadyExists": "Групата \"{name}\" вече съществува.",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -336,11 +341,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "Канал с хаштаг",
   "channels_public": "Публично",
   "channels_private": "Личен",
-  "channels_publicChannel": "Публичен канал",
-  "channels_privateChannel": "Частен канал",
   "channels_editChannel": "Редактирай канал",
   "channels_muteChannel": "Заглуши канала",
   "channels_unmuteChannel": "Включи известията на канала",
@@ -366,7 +368,7 @@
   "channels_channelName": "Име на канала",
   "channels_usePublicChannel": "Използвайте публичен канал",
   "channels_standardPublicPsk": "Стандартен публичен PSK",
-  "channels_pskHex": "PSK (Hex)",
+  "channels_pskHex": "PSK (шестнадесетичен код)",
   "channels_generateRandomPsk": "Генерирай случайна PSK",
   "channels_enterChannelName": "Моля, въведете име на канал.",
   "channels_pskMustBe32Hex": "PSK трябва да бъде 32 шестнаредни знака.",
@@ -387,6 +389,22 @@
     }
   },
   "channels_smazCompression": "Компресия SMAZ",
+  "channels_cyr2latCompression": "Компресия Cyr2Lat",
+  "channels_cyr2latCompressionDscr": "Заменя някои кирилични символи с латиница при изпращане.",
+  "channels_cyr2latSettingsHeading": "Настройки на Cyr2Lat",
+  "channels_cyr2latSettingsSubheading": "Списък със замествания",
+  "channels_cyr2latSettingsDscr": "Редактиране на JSON конфигурацията за заместване на символи",
+  "channels_cyr2latSettingsDialogHint": "JSON карта за замествания",
+  "channels_cyr2latSettingsDialogWrongJSON": "Неправилен JSON: {error}",
+  "settings_cyr2latProfileAdd": "Добавяне на профил Cyr2Lat",
+  "settings_cyr2latProfileName": "Име на профила",
+  "settings_cyr2latProfileNameEmpty": "Името на профила не може да бъде празно",
+  "settings_cyr2latProfileAdded": "Профилът е добавен успешно",
+  "settings_cyr2latProfileUpdated": "Профилът е актуализиран успешно",
+  "settings_cyr2latProfileEdit": "Редактиране на Cyr2Lat профил",
+  "settings_cyr2latProfileDelete": "Изтриване на профил Cyr2Lat",
+  "settings_cyr2latProfileDeleted": "Профилът беше изтрит успешно",
+  "settings_cyr2latProfileDeleteDscr": "Сигурен ли сте, че искате да изтриете профила \"{name}\"?",
   "channels_channelUpdated": "Каналът \"{name}\" е актуализиран",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -398,7 +416,7 @@
   "channels_publicChannelAdded": "Публичен канал добавен",
   "channels_sortBy": "Сортирай по",
   "channels_sortManual": "Ръчно",
-  "channels_sortAZ": "A-Z",
+  "channels_sortAZ": "От A до Я",
   "channels_sortLatestMessages": "Последни съобщения",
   "channels_sortUnread": "Непрочетено",
   "chat_noMessages": "Няма съобщения.",
@@ -476,7 +494,7 @@
   "debugLog_noEntries": "Все още няма дебъг логове.",
   "debugLog_enableInSettings": "Активирайте отстраняване на грешки в настройките на приложението",
   "debugLog_frames": "Рамки",
-  "debugLog_rawLogRx": "Raw Log-RX",
+  "debugLog_rawLogRx": "Необработен лог-RX",
   "debugLog_noBleActivity": "Няма BLE активност към момента.",
   "debugFrame_length": "Дължина на кадъра: {count} байта",
   "@debugFrame_length": {
@@ -530,7 +548,7 @@
       }
     }
   },
-  "debugFrame_textTypeCli": "CLI",
+  "debugFrame_textTypeCli": "Команден ред (CLI)",
   "debugFrame_textTypePlain": "Просто",
   "debugFrame_text": "- Текст: \"{text}\"",
   "@debugFrame_text": {
@@ -549,7 +567,7 @@
   "chat_pathHistoryFull": "Историята на пътя е пълна. Премахнете записи, за да добавите нови.",
   "chat_hopSingular": "скочи",
   "chat_hopPlural": "скоци",
-  "chat_hopsCount": "{count} {count, plural, =1{hop} other{hops}}",
+  "chat_hopsCount": "{count} {count, plural, =1{скача} other{скача}}",
   "@chat_hopsCount": {
     "placeholders": {
       "count": {
@@ -882,7 +900,7 @@
   "repeater_statusSubtitle": "Прегледайте статуса, статистиката и съседните устройства.",
   "repeater_telemetry": "Телеметрия",
   "repeater_telemetrySubtitle": "Прегледайте телеметрията на сензорите и системните статистики",
-  "repeater_cli": "CLI",
+  "repeater_cli": "Команден ред (CLI)",
   "repeater_cliSubtitle": "Изпрати команди към ретранслатора",
   "repeater_settings": "Настройки",
   "repeater_settingsSubtitle": "Конфигурирайте параметрите на репитера",
@@ -1058,6 +1076,81 @@
   },
   "repeater_confirm": "БеПотвърди",
   "repeater_settingsSaved": "Настройките са запазени успешно.",
+  "repeater_rxGain": "Увеличен коефициент на възвръщаемост (RX)",
+  "repeater_rxGainHelper": "По-висока чувствителност, по-голям ток (само за SX1262/SX1268)",
+  "repeater_refreshRxGain": "Възстановете повишената ефективност на RX",
+  "repeater_multiAcks": "Множество потвърждения",
+  "repeater_multiAcksSubtitle": "Признавайте съобщения по множество канали за по-добро доставяне.",
+  "repeater_refreshMultiAcks": "Обновете множество потвърждения",
+  "repeater_networkHealth": "Състояние на мрежата",
+  "repeater_loopDetect": "Откриване на цикли",
+  "repeater_loopDetectHelper": "Изпратете пакети, които изглеждат като цикли в маршрутизацията.",
+  "repeater_loopDetectOff": "Изключено",
+  "repeater_loopDetectMinimal": "Минимален",
+  "repeater_loopDetectModerate": "Умерен",
+  "repeater_loopDetectStrict": "Строг",
+  "repeater_dutyCycle": "Цикъл на работа/почивка",
+  "repeater_dutyCycleHelper": "Максимален процент на използване на времето на въздуха",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Информация за оператора",
+  "repeater_ownerInfoHelper": "Публични метаданни за този репитер",
+  "repeater_refreshOwnerInfo": "Обновете информацията за оператора",
+  "repeater_floodMax": "Максимален брой скачания при наводнение",
+  "repeater_floodMaxHelper": "Максималният брой пакети, които един поток може да пренесе (0-64)",
+  "repeater_advancedSettings": "Напреднал",
+  "repeater_advancedSettingsSubtitle": "Регулаторни копчета за опитни оператори",
+  "repeater_pathHashMode": "Режим за хеширане на пътища",
+  "repeater_pathHashModeHelper": "Байтовете, използвани за кодиране на идентификатора на този репитер в таговете за откриване на потоци/цикли, са: 0=1 байт (256 идентификатора, до 64 скача), 1=2 байта (65 000 идентификатора, до 32 скача), 2=3 байта (16 милиона идентификатора, до 21 скача). Версии 1.13 и по-стари версии на фърмуера използват многобайтови пътища – само след като мрежата е актуализирана до версия 1.14 или по-нова.",
+  "repeater_txDelay": "Забавяне на проекта \"Flood TX\"",
+  "repeater_txDelayHelper": "Предавайте разстоянието между пакетите за трафик при наводнения, като множител на времето за пренос на пакета (0-2, по подразбиране 0.5). По-висока стойност означава по-малко сблъсъци, но по-бавно предаване.",
+  "repeater_directTxDelay": "Директно забавяне на сигнала",
+  "repeater_directTxDelayHelper": "Предаване на интервали за директен (не-масивен) трафик, като множител на времето за пренос на пакета (0-2, по подразбиране 0.3).",
+  "repeater_intThresh": "Праг на интерференция",
+  "repeater_intThreshHelper": "Прагът е зададен на нивото на шума на радиото, така че да отхвърля смущения, които са над този праг. 0 – изключва; активирайте само, ако забележите грешки в шумна честотна лента.",
+  "repeater_agcResetInterval": "Интервал за рестартиране на AGC",
+  "repeater_agcResetIntervalHelper": "Колко често да се рестартира автоматичната настройка на усилването, за да се възстанови от състояние, в което усилването е блокирано. Времето за рестартиране е няколко секунди, като се определя като кратна на 4. 0 деактивира периодичното рестартиране.",
+  "repeater_actionsTitle": "Действия",
+  "repeater_sendAdvert": "Изпратете реклама за навод",
+  "repeater_sendAdvertSubtitle": "Публикувайте реклама за навод в мрежата.",
+  "repeater_sendAdvertZeroHop": "Изпратете реклама без преминаване през други системи",
+  "repeater_sendAdvertZeroHopSubtitle": "Публикувайте реклама, която достига до целевата аудитория само чрез директно разпространение (без използване на посредници).",
+  "repeater_clockSync": "Синхронизиране на часовника сега",
+  "repeater_clockSyncSubtitle": "Настройте времето на телефона си да съвпада с времето на репитера.",
+  "repeater_actionSucceeded": "{action} succeeded",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} failed: {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Настройки запаметени – рестартирайте ретранслатора, за да ги приложите.",
+  "repeater_settingsPartialFailure": "Някои настройки не успяха: {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "Грешка при запазване на настройките: {error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1069,11 +1162,9 @@
   "repeater_refreshBasicSettings": "Обнови Основни Настройки",
   "repeater_refreshRadioSettings": "Обнови настройките на радиопредавателите",
   "repeater_refreshTxPower": "Обнови TX захранване",
-  "repeater_refreshLocationSettings": "Обнови настройките на местоположението",
   "repeater_refreshPacketForwarding": "Обнови пакетно пренасочване",
   "repeater_refreshGuestAccess": "Обнови достъп за гости",
   "repeater_refreshPrivacyMode": "Обнови Режим на поверителност",
-  "repeater_refreshAdvertisementSettings": "Обнови Настройки на Рекламата",
   "repeater_refreshed": "{label} е обновено",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1191,6 +1282,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "Цифров вход",
+  "telemetry_digitalOutputLabel": "Цифров изход",
+  "telemetry_analogInputLabel": "Аналогов вход",
+  "telemetry_analogOutputLabel": "Аналогов изход",
+  "telemetry_genericLabel": "Общ сензор",
+  "telemetry_luminosityLabel": "Осветеност",
+  "telemetry_presenceLabel": "Присъствие",
+  "telemetry_humidityLabel": "Влажност",
+  "telemetry_accelerometerLabel": "Акселерометър",
+  "telemetry_pressureLabel": "Налягане",
+  "telemetry_altitudeLabel": "Надморска височина",
+  "telemetry_frequencyLabel": "Честота",
+  "telemetry_percentageLabel": "Процент",
+  "telemetry_concentrationLabel": "Концентрация",
+  "telemetry_powerLabel": "Мощност",
+  "telemetry_distanceLabel": "Разстояние",
+  "telemetry_energyLabel": "Енергия",
+  "telemetry_directionLabel": "Посока",
+  "telemetry_timeLabel": "Време",
+  "telemetry_gyrometerLabel": "Жироскоп",
+  "telemetry_colourLabel": "Цвят",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Превключвател",
+  "telemetry_polylineLabel": "Полилиния",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Брой заявки",
+  "telemetry_error": "Неуспешно получаване на данни",
   "telemetry_noData": "Няма налични данни за телеметрията.",
   "telemetry_channelTitle": "Канал {channel}",
   "@telemetry_channelTitle": {
@@ -1346,7 +1474,7 @@
   "listFilter_sortBy": "Сортирай по",
   "listFilter_latestMessages": "Последни съобщения",
   "listFilter_heardRecently": "Слушано е наскоро",
-  "listFilter_az": "A-Z",
+  "listFilter_az": "А-Я",
   "listFilter_filters": "Филтри",
   "listFilter_all": "Всички",
   "listFilter_users": "Потребители",
@@ -1888,5 +2016,435 @@
   "tcpErrorTimedOut": "Връзката TCP изтекла.",
   "tcpConnectionFailed": "Неуспешно е установено TCP връзката: {error}",
   "map_showDiscoveryContacts": "Покажи контакти за откриване",
-  "map_setAsMyLocation": "Задайте като моя местоположение"
+  "map_setAsMyLocation": "Задайте като моя местоположение",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_denyAll": "Откажи всичко",
+  "settings_allowAll": "Позволи всичко",
+  "settings_allowByContact": "Позволи по флагове за контакт",
+  "settings_privacy": "Настройки на поверителността",
+  "settings_privacySettingsDescription": "Изберете каква информация устройството ви споделя с другите.",
+  "settings_privacySubtitle": "Контролирайте каква информация се споделя.",
+  "settings_telemetryBaseMode": "Базов режим на телеметрия",
+  "settings_telemetryLocationMode": "Режим на местоположение на телеметрията",
+  "settings_advertLocation": "Място на обявата",
+  "settings_advertLocationSubtitle": "Включи местоположение в обявата",
+  "contact_info": "Контактна информация",
+  "settings_telemetryEnvironmentMode": "Режим на средата на телеметрията",
+  "contact_telemetry": "Телеметрия",
+  "contact_lastSeen": "Последно видян",
+  "contact_clearChat": "Изчисти чата",
+  "contact_teleBase": "Базата данни за телеметрия",
+  "contact_settings": "Настройки за контакти",
+  "contact_teleBaseSubtitle": "Позволи споделяне на ниво на батерията и основна телеметрия",
+  "contact_teleEnv": "Среда на телеметрия",
+  "contact_teleLocSubtitle": "Позволи споделяне на данни за местоположение",
+  "contact_teleLoc": "Местоположение на телеметрията",
+  "contact_teleEnvSubtitle": "Позволи споделяне на данни от средносферните датчици",
+  "appSettings_initialRouteWeight": "Първоначална тежест на маршрута",
+  "appSettings_maxRouteWeight": "Максимално допустимо тегло на маршрута",
+  "appSettings_initialRouteWeightSubtitle": "Начално тегло за новооткрити маршрути",
+  "appSettings_maxRouteWeightSubtitle": "Максималното тегло, което един маршрут може да събере от успешни доставки.",
+  "appSettings_routeWeightSuccessIncrement": "Увеличение на теглото за успех",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Тегло, добавено към път след успешно доставяне.",
+  "appSettings_routeWeightFailureDecrement": "Намаляване на теглото, свързано с неуспех",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Тегло, което е било премахнато от пътя след неуспешен опит за доставка.",
+  "appSettings_maxMessageRetries": "Максимален брой опити за изпращане на съобщение",
+  "appSettings_maxMessageRetriesSubtitle": "Брой опити за повторно изпращане, преди съобщението да бъде маркирано като неуспешно.",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Режим на телеметрията е обновен",
+  "map_showOverlaps": "Покриване на ключа на повтаряча",
+  "map_runTraceWithReturnPath": "Върни се по същия път.",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "chat_sendCooldown": "Моля, изчакайте малко, преди да изпратите отново.",
+  "appSettings_languageHu": "Унгарски",
+  "appSettings_jumpToOldestUnread": "Преминете към най-старата непочетена статия",
+  "appSettings_jumpToOldestUnreadSubtitle": "Когато отворите чат с непрочетени съобщения, плъзнете надолу, за да видите първото непрочетено съобщение, вместо най-новото.",
+  "appSettings_languageJa": "Японски",
+  "appSettings_languageKo": "Корейски",
+  "radioStats_tooltip": "Статистика за радио и мрежа",
+  "radioStats_screenTitle": "Статистически данни за радиопредаванията",
+  "radioStats_notConnected": "Свържете се с устройство, за да видите статистически данни за радиопредаване.",
+  "radioStats_firmwareTooOld": "Статистиката на радиостанцията изисква съвместимо софтуерно решение версия 8 или по-нова.",
+  "radioStats_waiting": "Изчакване на данни…",
+  "radioStats_noiseFloor": "Ниво на шума: {noiseDbm} dBm",
+  "radioStats_lastRssi": "Последен RSSI: {rssiDbm} dBm",
+  "radioStats_lastSnr": "Последна стойност на SNR: {snr} dB",
+  "radioStats_txAir": "Време на въздух (общо): {seconds} секунди",
+  "radioStats_rxAir": "Общо време на използване на RX (в секунди): {seconds} с",
+  "radioStats_chartCaption": "Ниво на шума (dBm) за последните измервания.",
+  "radioStats_stripNoise": "Ниво на шума: {noiseDbm} dBm",
+  "radioStats_stripWaiting": "Извличане на данни за радиото…",
+  "radioStats_settingsTile": "Статистически данни за радиостанции",
+  "radioStats_settingsSubtitle": "Ниво на шума, RSSI, SNR и време на пренос",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_enableTitle": "Активирайте превода",
+  "translation_title": "Превод",
+  "translation_composerTitle": "Преведете преди да изпратите",
+  "translation_enableSubtitle": "Превеждайте входящите съобщения и позволявайте предварително превеждане преди изпращане.",
+  "translation_composerSubtitle": "Контролира началния статус на иконата за превод, създадена от композитора.",
+  "translation_autoIncomingTitle": "Автоматичен превод на съобщения",
+  "translation_autoIncomingSubtitle": "Превежда автоматично съобщенията за известия, както и за чатове или канали.",
+  "translation_translateMessage": "Преведи съобщението",
+  "translation_targetLanguage": "Целеви език",
+  "translation_useAppLanguage": "Използвайте езика на приложението",
+  "translation_downloadedModelLabel": "Изтегнат модел",
+  "translation_presetModelLabel": "Предварително конфигуриран модел от Hugging Face",
+  "translation_manualUrlLabel": "URL на ръководството",
+  "translation_downloadModel": "Изтеглете модела",
+  "translation_downloading": "Изтегляне...",
+  "translation_working": "Работа...",
+  "translation_stop": "Спрете",
+  "translation_mergingChunks": "Съединяване на изтеглените части в един файл...",
+  "translation_downloadedModels": "Изтеглени модели",
+  "translation_deleteModel": "Изтриване на модела",
+  "translation_modelDownloaded": "Моделът за превод е изтеглен.",
+  "translation_downloadStopped": "Изтеглянето беше прекъснато.",
+  "translation_downloadFailed": "Не успях да изтегля: {error}",
+  "translation_enterUrlFirst": "Въведете първо URL адрес на модела.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerDisabledHint": "Изпращайте съобщения на оригиналния въведен език.",
+  "translation_translateBeforeSending": "Преведете преди да изпратите",
+  "translation_messageTranslation": "Превод на съобщението",
+  "translation_composerEnabledHint": "Съобщенията ще бъдат преведени, преди да бъдат изпратени.",
+  "translation_translateTo": "Превеждане на {language}",
+  "translation_translationOptions": "Опции за превод",
+  "translation_systemLanguage": "Език на системата",
+  "scanner_linuxPairingPinTitle": "PIN за съвпадение чрез Bluetooth",
+  "scanner_linuxPairingPinPrompt": "Въведете PIN кода за {deviceName} (оставете празно, ако няма такъв).",
+  "scanner_linuxPairingHidePin": "Скриване на PIN кода",
+  "scanner_linuxPairingShowPin": "Покажи PIN",
+  "repeater_cliQuickClockSync": "Синхронизация на часовника",
+  "repeater_cliQuickDiscovery": "Открий Съседи",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLoginSubtitle": "Автоматично изпращайте съобщение \"синхронизиране на часовника\" след успешно влизане.",
+  "repeater_clockSyncAfterLogin": "Синхронизиране на часовника след влизане",
+  "chat_sendMessage": "Изпратете съобщение",
+  "room_guest": "Информация за сървъра на стаята",
+  "repeater_guest": "Информация за ретранслаторите",
+  "repeater_guestTools": "Инструменти за гости",
+  "repeater_getCategory": "Получете стойности",
+  "repeater_powerMgmt": "Управление на енергията",
+  "repeater_sensors": "Датчици",
+  "repeater_cliHelpPowerOff": "Изключва устройството. (не се очаква отговор)",
+  "repeater_cliHelpClkReboot": "Възстановява часовника до известна историческа дата и рестартира устройството.",
+  "repeater_cliHelpAdvertZeroHop": "Изпраща реклама, която достига само до съседни устройства (само до съседни мрежи).",
+  "repeater_cliHelpStartOta": "Стартира актуализация на фърмуера чрез въздушното, на всички поддържани платки.",
+  "repeater_cliHelpTime": "Задава времето на устройството към зададените секунди от началото на Unix ерата. Времето не може да се върне назад.",
+  "repeater_cliHelpBoard": "Показва производителя на платката / идентификатора на хардуера.",
+  "repeater_cliHelpDiscoverNeighbors": "Изпраща заявка за откриване на съседни възли. (Само за устройства тип репитер)",
+  "repeater_cliHelpPowersaving": "Показва дали режимът за пестене на енергия е активиран или деактивиран.",
+  "repeater_cliHelpPowersavingOnOff": "Активира или деактивира режима за пестене на енергия (ако е поддържан).",
+  "repeater_cliHelpErase": "(Само за серийни устройства) Форматира файловата система на устройството. Изтрива всички настройки и контакти.",
+  "repeater_cliHelpSetDutyCycle": "Задава максимално допустимия процент на използване на времето за предаване (от 1 до 100 процента). Вътрешно коригира фактора за времето на предаване.",
+  "repeater_cliHelpSetPrvKey": "(Само за серийни номера) Заменя личната част от ключа за идентификация на устройството. Необходимо е да се рестартира устройството, за да се приложи. Генерира нов публичен ключ.",
+  "repeater_cliHelpSetRadioRxGain": "(Само за SX126x) Превключва усиления на приемния сигнал (RX gain) за подобрена чувствителност при по-високо потребление на ток.",
+  "repeater_cliHelpSetOwnerInfo": "Задава низовете с информация за контакт на собственика, които са включени в рекламите. Използвайте '|' за нови редове.",
+  "repeater_cliHelpSetPathHashMode": "Задава режима за хеширане на пътищата. 0 = за стари системи, 1 = за стандартни системи, 2 = за строги системи. Влияе върху начина, по който се съпоставят маршрутите.",
+  "repeater_cliHelpSetLoopDetect": "Задава чувствителността за откриване на цикли в маршрутизацията: изключена, минимална, умерена или строга.",
+  "repeater_cliHelpSetFreq": "(Само за серийно управление) Бързо задава само честотата. Необходимо е рестартиране. Препоръчително е да се използват настройките за \"радио\", за да се зададат всички параметри.",
+  "repeater_cliHelpSetBridgeChannel": "(Само за моста ESPNow) Определя WiFi канала (от 1 до 14), използван от моста.",
+  "repeater_cliHelpGetName": "Показва зададеното име на възела.",
+  "repeater_cliHelpGetRole": "Показва ролята на фърмуера (например, репитер, сървър за стая и т.н.).",
+  "repeater_cliHelpGetPublicKey": "Показва публичния ключ на устройството.",
+  "repeater_cliHelpGetPrvKey": "(Само за серийния номер) Показва личната ключа на устройството. Трябва да се третира като тайна.",
+  "repeater_cliHelpGetRepeat": "Показва дали функцията за пренасочване на пакети (ролята на репитер) е активирана или деактивирана.",
+  "repeater_cliHelpGetTx": "Показва текущата мощност на TX в dBm.",
+  "repeater_cliHelpGetFreq": "Показва зададената честота в MHz.",
+  "repeater_cliHelpGetRadio": "Показва пълните радио параметри: честота, ширина на честотния обхват, фактор на разпространение, скорост на кодиране.",
+  "repeater_cliHelpGetRadioRxGain": "(Само за SX126x) Показва състоянието на усиления сигнал на RX.",
+  "repeater_cliHelpGetAf": "Показва текущия коефициент на въздействие върху въздуха.",
+  "repeater_cliHelpGetDutyCycle": "Показва текущия допустим цикъл на работа като процент.",
+  "repeater_cliHelpGetIntThresh": "Показва прага на интерференцията на канала в децибели (dB).",
+  "repeater_cliHelpGetAgcResetInterval": "Показва интервала за рестартиране на AGC в секунди.",
+  "repeater_cliHelpGetMultiAcks": "Показва дали режимът \"двоен ACK\" е активиран (1) или деактивиран (0).",
+  "repeater_cliHelpGetAllowReadOnly": "Показва дали е разрешено само четене за гостите.",
+  "repeater_cliHelpGetAdvertInterval": "Показва времето на рекламата в минути.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Показва интервала на рекламата за навод в часове.",
+  "repeater_cliHelpGetGuestPassword": "Показва зададения парол за гост.",
+  "repeater_cliHelpGetLat": "Показва зададената географска ширина.",
+  "repeater_cliHelpGetLon": "Показва зададената дължина.",
+  "repeater_cliHelpGetRxDelay": "Показва основната стойност на забавянето на сигнала.",
+  "repeater_cliHelpGetTxDelay": "Показва коефициента за забавяне при режим на наводняване.",
+  "repeater_cliHelpGetDirectTxDelay": "Показва коефициента за забавяне при директен режим.",
+  "repeater_cliHelpGetFloodMax": "Показва максималния брой на повторни наводнения.",
+  "repeater_cliHelpGetOwnerInfo": "Показва информацията за контакт на собственика.",
+  "repeater_cliHelpGetPathHashMode": "Показва режима на хеширане на пътя (0/1/2).",
+  "repeater_cliHelpGetLoopDetect": "Показва чувствителността към откриване на цикли.",
+  "repeater_cliHelpGetAcl": "(Само за серийни номера) Изброява настройките за контрол на достъпа в репитера.",
+  "repeater_cliHelpGetBridgeEnabled": "Показва дали мостът е активиран.",
+  "repeater_cliHelpGetBridgeDelay": "Показва забавянето на моста в милисекунди.",
+  "repeater_cliHelpGetBridgeSource": "Показва дали мостът изпраща или получава пакети RX или TX.",
+  "repeater_cliHelpGetBridgeBaud": "(Само за мост RS232) Показва скоростта на предаване на данните на моста.",
+  "repeater_cliHelpGetBridgeChannel": "(Само за моста ESPNow) Показва канала на WiFi на моста.",
+  "repeater_cliHelpGetBridgeSecret": "(Само за моста ESPNow) Показва споделения секрет на моста.",
+  "repeater_cliHelpGetBootloaderVer": "(Само за NRF52) Показва версията на зареждащия софтуер.",
+  "repeater_cliHelpGetAdcMultiplier": "Показва множителя на аналоговия-цифров преобразувател (мащабиране на напрежението от батерията).",
+  "repeater_cliHelpGetPwrMgtSupport": "Описва дали борда на директорите има поддръжка за управление на захранването.",
+  "repeater_cliHelpGetPwrMgtSource": "Показва текущия източник на захранване: външен или батерия.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Показва най-скорошните причини за рестартиране и изключване.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Показва напрежението на батерията при стартиране, измерено в миливолта (mV).",
+  "repeater_cliHelpSensorGet": "Чете персонализирана настройка на сензор чрез клавиш.",
+  "repeater_cliHelpSensorSet": "Създава персонализирана настройка за сензор.",
+  "repeater_cliHelpSensorList": "Показва всички настройки на потребителските сензори, разделени на страници, започвайки от опционален индекс.",
+  "repeater_cliHelpRegionDefault": "Показва текущия обхват на региона по подразбиране.",
+  "repeater_cliHelpRegionDefaultSet": "Задава обхвата на региона по подразбиране. Използвайте \"<null>\", за да го изчистите.",
+  "repeater_cliHelpRegionListAllowed": "Списва регионите, които позволяват преминаване на превозни средства при наводнение.",
+  "repeater_cliHelpRegionListDenied": "Списва региони, които забраняват движението по пътищата при наводнения.",
+  "repeater_cliHelpStatsPackets": "(Само за серия) Показва статистически данни на ниво пакет.",
+  "repeater_cliHelpStatsRadio": "(Само за конкретен сериал) Показва радиостатистика.",
+  "repeater_cliHelpStatsCore": "(Само за серийния номер) Показва основните статистически данни за фърмуера.",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "settings_multiAck": "Множество потвърждения",
+  "map_sharedAt": "Споделено",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losSelectedObstructionTitle": "Избрано препятствие",
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "losBlockedSpotsHint": "Кликнете върху блокираната точка, за да я отбележите на картата.",
+  "losBlockedSpotsTitle": "Ограничени места",
+  "losSelectedObstructionDetails": "Blocked by {obstruction} {heightUnit}, {distanceFromA} from A and {distanceFromB} from B ({distanceUnit}).",
+  "chat_markAsUnread": "Отбелязване като непрочетено",
+  "settings_companionDebugLogSubtitle": "Команди, отговори и сурови данни за протоколите BLE/TCP/USB",
+  "chat_newMessages": "Нови съобщения",
+  "settings_companionDebugLog": "Лог за отстраняване на грешки (за съпътстваща програма)",
+  "repeater_chanUtil": "Използване на канала",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "messageStatus_pending": "Изпращане",
+  "common_undo": "Отмяни",
+  "messageStatus_delivered": "Доставен",
+  "messageStatus_sent": "Изпратено",
+  "messageStatus_failed": "Не успях да изпратя",
+  "messageStatus_repeated": "Слушах го многократно",
+  "contacts_moreOptions": "Повече възможности",
+  "contacts_searchOpen": "Търсене на контакти",
+  "contacts_searchClose": "Затвори търсене",
+  "routing_title": "Маршрутизиране",
+  "routing_modeAuto": "Автомобил",
+  "routing_modeFlood": "Наводнение",
+  "routing_modeManual": "Ръководство",
+  "routing_modeAutoHint": "Автоматично избира най-известния път, като при липса на информация, използва стратегия за \"запълване\" на празните пространства.",
+  "routing_modeFloodHint": "Излъчване през всички ретранслатори. Най-надежният начин, но изисква повече време на въздуха.",
+  "routing_modeManualHint": "Винаги следва точно пътя, който сте определили.",
+  "routing_currentRoute": "Текущ маршрут",
+  "routing_directNoHops": "Директ – без превключватели",
+  "routing_noPathYet": "Все още няма път. Съобщението продължава да се изпраща, докато не бъде открит маршрут.",
+  "routing_floodBroadcast": "Предаване през всички ретранслатори",
+  "routing_editPath": "Редактиране на пътя",
+  "routing_forgetPath": "Забравете за пътя",
+  "routing_knownPaths": "Известни маршрути",
+  "routing_knownPathsHint": "Натиснете бутона, за да превключите към него.",
+  "routing_inUse": "В експлоатация",
+  "routing_qualityStrong": "Силен първи скок",
+  "routing_qualityGood": "Добър първи опит",
+  "routing_qualityFair": "Първият добър скок",
+  "routing_qualityWorked": "Беше изпълнено/Доведено до край",
+  "routing_qualityFlood": "Получено чрез информация, разпространена в резултат на навод.",
+  "routing_qualityUntested": "Не тестван",
+  "routing_neverWorked": "никога не е потвърдено",
+  "routing_floodDelivery": "Доставка при навод",
+  "pathEditor_title": "Създаване на път",
+  "pathEditor_hopCounter": "{count} от 64 различни вида малц",
+  "pathEditor_noHops": "Все още няма добавени хмел. Можете да използвате бутоните по-долу, за да ги добавите по ред, или да запазите рецептата без хмел, за да я изпратите директно.",
+  "pathEditor_addHops": "Добавете хмела в реда, в който е посочено.",
+  "pathEditor_searchRepeaters": "Търсене на повтори",
+  "pathEditor_advancedHex": "Разширено: необработен шестничен път",
+  "pathEditor_hexLabel": "Префикси на шестнадесетична система",
+  "pathEditor_hexHelper": "Два шест-символни идентификатора на скок, разделени със запетаи",
+  "pathEditor_invalidTokens": "Невалидно: {tokens}",
+  "routing_lastWorked": "worked {when}",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "pathEditor_tooManyHops": "Максимум 64 крачета",
+  "pathEditor_usePath": "Използвайте този маршрут.",
+  "pathEditor_removeHop": "Премахнете хмела",
+  "pathEditor_unknownHop": "Неизвестен репитер",
+  "map_zoomIn": "Увеличи",
+  "map_zoomOut": "Приближете се по-малко",
+  "map_centerMap": "Карта на центъра",
+  "chrome_bluetoothRequiresChromium": "Web Bluetooth изисква браузър, базиран на Chromium.",
+  "channels_communityShortId": "Идентификационен номер: {id}...",
+  "pathTrace_legendGpsConfirmed": "GPS потвърдено",
+  "pathTrace_legendInferred": "Извлечена позиция"
 }

lib/l10n/app_de.arb

@@ -33,6 +33,8 @@
   "common_remove": "Löschen",
   "common_enable": "Aktivieren",
   "common_disable": "Deaktivieren",
+  "common_autoRefresh": "Automatische Aktualisierung",
+  "common_interval": "Intervall",
   "common_reboot": "Neustart",
   "common_loading": "Laden...",
   "common_notAvailable": "—",
@@ -52,7 +54,7 @@
       }
     }
   },
-  "scanner_title": "MeshCore Open",
+  "scanner_title": "MeshCore – Open-Version",
   "scanner_scanning": "Scannen nach Geräten...",
   "scanner_connecting": "Verbunden...",
   "scanner_disconnecting": "Trenne...",
@@ -104,6 +106,8 @@
   "settings_privacyModeEnabled": "Datenschutzmodus aktiviert",
   "settings_privacyModeDisabled": "Datenschutzmodus deaktiviert",
   "settings_actions": "Aktionen",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "Sende Ankündigung",
   "settings_sendAdvertisementSubtitle": "Sende eine Ankündigung",
   "settings_advertisementSent": "Ankündigung gesendet",
@@ -121,7 +125,7 @@
   "settings_appDebugLog": "App-Debug-Protokoll",
   "settings_appDebugLogSubtitle": "Anwendung Debug-Nachrichten",
   "settings_about": "Über",
-  "settings_aboutVersion": "MeshCore Open v{version}",
+  "settings_aboutVersion": "MeshCore Open, Version {version}",
   "@settings_aboutVersion": {
     "placeholders": {
       "version": {
@@ -146,7 +150,7 @@
   "settings_spreadingFactor": "Verteilungsfaktor",
   "settings_codingRate": "Kodierungsrate",
   "settings_txPower": "TX-Leistung (dBm)",
-  "settings_txPowerHelper": "0 - 22",
+  "settings_txPowerHelper": "0 – 22",
   "settings_txPowerInvalid": "Ungültige TX-Leistung (0-22 dBm)",
   "settings_error": "Fehler: {message}",
   "@settings_error": {
@@ -158,25 +162,25 @@
   },
   "appSettings_title": "App-Einstellungen",
   "appSettings_appearance": "Aussehen",
-  "appSettings_theme": "Theme",
+  "appSettings_theme": "Thema",
   "appSettings_themeSystem": "Systemstandard",
   "appSettings_themeLight": "Hell",
   "appSettings_themeDark": "Dunkel",
   "appSettings_language": "Sprache",
   "appSettings_languageSystem": "Systemstandard",
-  "appSettings_languageEn": "English",
-  "appSettings_languageFr": "Français",
-  "appSettings_languageEs": "Español",
+  "appSettings_languageEn": "Englisch",
+  "appSettings_languageFr": "Französisch",
+  "appSettings_languageEs": "Spanisch",
   "appSettings_languageDe": "Deutsch",
-  "appSettings_languagePl": "Polski",
-  "appSettings_languageSl": "Slovenščina",
-  "appSettings_languagePt": "Português",
-  "appSettings_languageIt": "Italiano",
-  "appSettings_languageZh": "中文",
-  "appSettings_languageSv": "Svenska",
-  "appSettings_languageNl": "Nederlands",
-  "appSettings_languageSk": "Slovenčina",
-  "appSettings_languageBg": "Български",
+  "appSettings_languagePl": "Polnisch",
+  "appSettings_languageSl": "Slowenisch",
+  "appSettings_languagePt": "Portugiesisch",
+  "appSettings_languageIt": "Italienisch",
+  "appSettings_languageZh": "Chinesisch",
+  "appSettings_languageSv": "Schwedisch",
+  "appSettings_languageNl": "Niederländisch",
+  "appSettings_languageSk": "Slowenisch",
+  "appSettings_languageBg": "Bulgarisch",
   "appSettings_notifications": "Benachrichtigungen",
   "appSettings_enableNotifications": "Benachrichtigungen aktivieren",
   "appSettings_enableNotificationsSubtitle": "Erhalte Benachrichtigungen für Nachrichten und Ankündigungen",
@@ -285,6 +289,7 @@
   "contacts_newGroup": "Neue Gruppe",
   "contacts_groupName": "Gruppenname",
   "contacts_groupNameRequired": "Der Gruppennamen ist erforderlich.",
+  "contacts_groupNameReserved": "Dieser Gruppenname ist reserviert",
   "contacts_groupAlreadyExists": "Die Gruppe \"{name}\" existiert bereits.",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -336,11 +341,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "Hashtag-Kanal",
   "channels_public": "Öffentlich",
   "channels_private": "Privat",
-  "channels_publicChannel": "Öffentlicher Kanal",
-  "channels_privateChannel": "Privater Kanal",
   "channels_editChannel": "Kanal bearbeiten",
   "channels_muteChannel": "Kanal stummschalten",
   "channels_unmuteChannel": "Kanal Stummschaltung aufheben",
@@ -366,7 +368,7 @@
   "channels_channelName": "Kanalname",
   "channels_usePublicChannel": "Verwende öffentlichen Kanal",
   "channels_standardPublicPsk": "Öffentliche Standard PSK",
-  "channels_pskHex": "PSK (Hex)",
+  "channels_pskHex": "PSK (Hexadezimal)",
   "channels_generateRandomPsk": "Zufällige PSK generieren",
   "channels_enterChannelName": "Bitte geben Sie einen Kanalnamen ein.",
   "channels_pskMustBe32Hex": "Die PSK muss 32 hexadezimale Zeichen haben.",
@@ -387,6 +389,22 @@
     }
   },
   "channels_smazCompression": "SMAZ-Komprimierung",
+  "channels_cyr2latCompression": "Cyr2Lat-Komprimierung",
+  "channels_cyr2latCompressionDscr": "Ersetzt einige kyrillische Zeichen durch lateinische Zeichen, wenn sie gesendet werden.",
+  "channels_cyr2latSettingsHeading": "Cyr2Lat-Einstellungen",
+  "channels_cyr2latSettingsSubheading": "Ersetzungsliste",
+  "channels_cyr2latSettingsDscr": "JSON-Konfiguration für die Zeichenersetzung bearbeiten",
+  "channels_cyr2latSettingsDialogHint": "JSON-Ersetzungstabelle",
+  "channels_cyr2latSettingsDialogWrongJSON": "Ungültiges JSON: {error}",
+  "settings_cyr2latProfileAdd": "Cyr2Lat-Profil hinzufügen",
+  "settings_cyr2latProfileName": "Profilname",
+  "settings_cyr2latProfileNameEmpty": "Der Profilname darf nicht leer sein",
+  "settings_cyr2latProfileAdded": "Profil erfolgreich hinzugefügt",
+  "settings_cyr2latProfileUpdated": "Profil erfolgreich aktualisiert",
+  "settings_cyr2latProfileEdit": "Cyr2Lat-Profil bearbeiten",
+  "settings_cyr2latProfileDelete": "Cyr2Lat-Profil löschen",
+  "settings_cyr2latProfileDeleted": "Profil erfolgreich gelöscht",
+  "settings_cyr2latProfileDeleteDscr": "Möchten Sie das Profil \"{name}\" wirklich löschen?",
   "channels_channelUpdated": "Kanal \"{name}\" aktualisiert",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -511,7 +529,7 @@
       }
     }
   },
-  "debugFrame_flags": "- Flags: 0x{value}",
+  "debugFrame_flags": "- Flaggen: 0x{value}",
   "@debugFrame_flags": {
     "placeholders": {
       "value": {
@@ -530,7 +548,7 @@
       }
     }
   },
-  "debugFrame_textTypeCli": "CLI",
+  "debugFrame_textTypeCli": "Befehlszeilen-Schnittstelle",
   "debugFrame_textTypePlain": "Einfach",
   "debugFrame_text": "- Text: \"{text}\"",
   "@debugFrame_text": {
@@ -632,7 +650,7 @@
       }
     }
   },
-  "map_pinsCount": "Pins: {count}",
+  "map_pinsCount": "Nadeln: {count}",
   "@map_pinsCount": {
     "placeholders": {
       "count": {
@@ -641,20 +659,20 @@
     }
   },
   "map_chat": "Benutzer",
-  "map_repeater": "Repeater",
+  "map_repeater": "Wiederholungseinheit",
   "map_room": "Raum",
   "map_sensor": "Sensor",
   "map_pinDm": "Pin (Kontakt)",
   "map_pinPrivate": "Pin (Channel)",
-  "map_pinPublic": "Pin (Public)",
+  "map_pinPublic": "Kennzeichnung (Öffentlich)",
   "map_lastSeen": "Letzte Sichtung",
   "map_disconnectConfirm": "Sind Sie sicher, dass Sie sich von diesem Gerät trennen möchten?",
   "map_from": "Von",
   "map_source": "Quelle",
-  "map_flags": "Flags",
+  "map_flags": "Flaggen",
   "map_shareMarkerHere": "Teilen Sie den Marker hier.",
   "map_pinLabel": "Pin Name",
-  "map_label": "Label",
+  "map_label": "Etikett",
   "map_pointOfInterest": "Punkt von Interesse",
   "map_sendToContact": "Senden an Kontakt",
   "map_sendToChannel": "Senden an Kanal",
@@ -882,7 +900,7 @@
   "repeater_statusSubtitle": "Status, Statistiken und Nachbarn anzeigen",
   "repeater_telemetry": "Telemetrie",
   "repeater_telemetrySubtitle": "Sensordaten und Systemwerte anzeigen",
-  "repeater_cli": "CLI",
+  "repeater_cli": "Befehlszeilen-Schnittstelle",
   "repeater_cliSubtitle": "Sende Befehle an den Repeater",
   "repeater_settings": "Einstellungen",
   "repeater_settingsSubtitle": "Repeater-parameter konfigurieren",
@@ -983,7 +1001,7 @@
   },
   "repeater_settingsTitle": "Repeater Einstellungen",
   "repeater_basicSettings": "Grundlegende Einstellungen",
-  "repeater_repeaterName": "Repeater Name",
+  "repeater_repeaterName": "Name des Repeater",
   "repeater_repeaterNameHelper": "Anzeigename für diesen Repeater",
   "repeater_adminPassword": "Admin-Passwort",
   "repeater_adminPasswordHelper": "Vollzugriffspasswort",
@@ -991,7 +1009,7 @@
   "repeater_guestPasswordHelper": "Schreibgeschütztes Zugriffspasswort",
   "repeater_radioSettings": "Funk Einstellungen",
   "repeater_frequencyMhz": "Frequenz (MHz)",
-  "repeater_frequencyHelper": "300-2500 MHz",
+  "repeater_frequencyHelper": "300–2500 MHz",
   "repeater_txPower": "TX Power",
   "repeater_txPowerHelper": "1-30 dBm",
   "repeater_bandwidth": "Bandbreite",
@@ -1058,6 +1076,81 @@
   },
   "repeater_confirm": "Bestätigen",
   "repeater_settingsSaved": "Einstellungen erfolgreich gespeichert",
+  "repeater_rxGain": "Erhöhter RX-Gewinn",
+  "repeater_rxGainHelper": "Höhere Empfindlichkeit, höherer Stromverbrauch (nur für SX1262/SX1268)",
+  "repeater_refreshRxGain": "Erneuerung des verstärkten RX-Effekts",
+  "repeater_multiAcks": "Mehrere Bestätigungen",
+  "repeater_multiAcksSubtitle": "Nachrichten über verschiedene Pfade senden, um die Zustellbarkeit zu verbessern.",
+  "repeater_refreshMultiAcks": "Mehrere Bestätigungen neu senden/aktualisieren",
+  "repeater_networkHealth": "Netzwerkgesundheit",
+  "repeater_loopDetect": "Erkennung von Schleifen",
+  "repeater_loopDetectHelper": "Erstellen Sie \"Flood\"-Pakete, die so aussehen, als ob sie Schleifen erzeugen.",
+  "repeater_loopDetectOff": "Aus",
+  "repeater_loopDetectMinimal": "Minimal",
+  "repeater_loopDetectModerate": "mäßig",
+  "repeater_loopDetectStrict": "streng",
+  "repeater_dutyCycle": "Betriebsdauer",
+  "repeater_dutyCycleHelper": "Höchster zulässiger Prozentsatz der Sendefläche",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Information zum Betreiber",
+  "repeater_ownerInfoHelper": "Öffentliche Metadaten für dieses Gerät",
+  "repeater_refreshOwnerInfo": "Aktualisieren Sie die Informationen zum Betreiber",
+  "repeater_floodMax": "Max-Hops-Flut",
+  "repeater_floodMaxHelper": "Maximale Anzahl an Hop-Paketen, die ein einzelnes Paket durchlaufen kann (0-64)",
+  "repeater_advancedSettings": "Fortgeschritten",
+  "repeater_advancedSettingsSubtitle": "Regler für erfahrene Bediener",
+  "repeater_pathHashMode": "Hash-Modus für Pfade",
+  "repeater_pathHashModeHelper": "Bytes, die zur Kodierung der ID dieses Repeaters in Flood-Pfad-/Schleifen-Erkennung-Tags verwendet werden. 0 = 1 Byte (256 IDs, bis zu 64 Hops), 1 = 2 Bytes (65.000 IDs, bis zu 32 Hops), 2 = 3 Bytes (16 Millionen IDs, bis zu 21 Hops). Firmware-Versionen 1.13 und älter verwenden mehrstellige Pfade – ab Version 1.14+ wird nur ein Pfad erstellt, sobald das Netzwerk aktiv ist.",
+  "repeater_txDelay": "Verzögerung bei Flood TX",
+  "repeater_txDelayHelper": "Wiederholung des Abstands für Hochwasser-Verkehr, als Multiplikator der Übertragungszeit des Pakets (0-2, Standardwert 0,5). Höherer Wert = weniger Kollisionen, aber langsamere Übertragung.",
+  "repeater_directTxDelay": "Direkter TX-Verzögerung",
+  "repeater_directTxDelayHelper": "Die Übertragungsrate für direkten (nicht-fluten) Datenverkehr wird als Vielfaches der Übertragungszeit des Pakets festgelegt (0-2, Standardwert 0,3).",
+  "repeater_intThresh": "Grenzwert für Störungen",
+  "repeater_intThreshHelper": "Der Schwellenwert wird an die Rauschpegel-Kalibrierung des Radios angepasst, sodass Störungen über diesem Wert abgefangen werden. 0 deaktiviert – erhöhen Sie diesen Wert nur, wenn Sie in einem verrauschten Frequenzbereich RX-Fehler feststellen.",
+  "repeater_agcResetInterval": "Intervall für die Rücksetzung von AGC",
+  "repeater_agcResetIntervalHelper": "Wie oft sollte die automatische Verstärkungskontrolle des Radios zurückgesetzt werden, um von einem Zustand mit zu hoher Verstärkung wieder in einen normalen Zustand zu gelangen? Die Einstellung „Sekunden“ ermöglicht eine Rücksetzung alle 4 Sekunden. Die Einstellung „0“ deaktiviert die periodische Rücksetzung.",
+  "repeater_actionsTitle": "Aktionen",
+  "repeater_sendAdvert": "Flood-Werbung versenden",
+  "repeater_sendAdvertSubtitle": "Eine Werbekampagne für Überschwemmungen über das Netzwerk verbreiten.",
+  "repeater_sendAdvertZeroHop": "Versenden Sie eine Anzeige ohne Zwischenvermittler.",
+  "repeater_sendAdvertZeroHopSubtitle": "Eine Werbekampagne mit einem einzigen Sender (ohne Weiterleitung) senden.",
+  "repeater_clockSync": "Uhr jetzt synchronisieren",
+  "repeater_clockSyncSubtitle": "Übertragen Sie die Uhrzeit Ihres Telefons an den Repeater.",
+  "repeater_actionSucceeded": "{action} war erfolgreich",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} fehlgeschlagen: {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Einstellungen gespeichert – Repeater neu starten, um die Änderungen anzuwenden.",
+  "repeater_settingsPartialFailure": "Einige Einstellungen sind fehlgeschlagen: {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "Fehler beim Speichern der Einstellungen: {error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1069,11 +1162,9 @@
   "repeater_refreshBasicSettings": "Grundlegende Einstellungen aktualisieren",
   "repeater_refreshRadioSettings": "Radio-Einstellungen aktualisieren",
   "repeater_refreshTxPower": "Sendeleistung aktualisieren",
-  "repeater_refreshLocationSettings": "Aktualisieren Sie die Standort Einstellungen",
   "repeater_refreshPacketForwarding": "Aktualisieren Paketweiterleitung",
   "repeater_refreshGuestAccess": "Aktualisieren Sie den Gastzugriff",
   "repeater_refreshPrivacyMode": "Wiederherstellen des Datenschutzzustands",
-  "repeater_refreshAdvertisementSettings": "Aktualisieren Sie die Ankündigungseinstellungen",
   "repeater_refreshed": "{label} wurde aktualisiert",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1090,7 +1181,7 @@
       }
     }
   },
-  "repeater_cliTitle": "Repeater CLI",
+  "repeater_cliTitle": "Befehlszeilen-Schnittstelle (CLI) für Repeater",
   "repeater_debugNextCommand": "Fehlersuche des nächsten Befehls",
   "repeater_commandHelp": "Hilfe",
   "repeater_clearHistory": "Löschen der Historie",
@@ -1191,6 +1282,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "Digitaleingang",
+  "telemetry_digitalOutputLabel": "Digitalausgang",
+  "telemetry_analogInputLabel": "Analogeingang",
+  "telemetry_analogOutputLabel": "Analogausgang",
+  "telemetry_genericLabel": "Allgemeiner Sensor",
+  "telemetry_luminosityLabel": "Helligkeit",
+  "telemetry_presenceLabel": "Anwesenheit",
+  "telemetry_humidityLabel": "Luftfeuchtigkeit",
+  "telemetry_accelerometerLabel": "Beschleunigungsmesser",
+  "telemetry_pressureLabel": "Druck",
+  "telemetry_altitudeLabel": "Höhe",
+  "telemetry_frequencyLabel": "Frequenz",
+  "telemetry_percentageLabel": "Prozentsatz",
+  "telemetry_concentrationLabel": "Konzentration",
+  "telemetry_powerLabel": "Leistung",
+  "telemetry_distanceLabel": "Entfernung",
+  "telemetry_energyLabel": "Energie",
+  "telemetry_directionLabel": "Richtung",
+  "telemetry_timeLabel": "Zeit",
+  "telemetry_gyrometerLabel": "Gyroskop",
+  "telemetry_colourLabel": "Farbe",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Schalter",
+  "telemetry_polylineLabel": "Polylinie",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Anzahl der Anfragen",
+  "telemetry_error": "Daten konnten nicht abgerufen werden",
   "telemetry_noData": "Keine Telemetriedaten verfügbar.",
   "telemetry_channelTitle": "Kanal {channel}",
   "@telemetry_channelTitle": {
@@ -1346,7 +1474,7 @@
   "listFilter_sortBy": "Sortiere nach",
   "listFilter_latestMessages": "Letzte Nachrichten",
   "listFilter_heardRecently": "Kürzlich gehört",
-  "listFilter_az": "A-Z",
+  "listFilter_az": "Von A bis Z",
   "listFilter_filters": "Filtere",
   "listFilter_all": "Alle",
   "listFilter_favorites": "Favoriten",
@@ -1461,7 +1589,7 @@
       }
     }
   },
-  "common_ok": "OK",
+  "common_ok": "Alles klar",
   "community_create": "Erstelle Community",
   "community_createDesc": "Erstelle eine neue Community und teile sie über den QR-Code.",
   "community_join": "Beitreten",
@@ -1472,14 +1600,14 @@
   "community_showQr": "Zeige QR-Code",
   "community_publicChannel": "Community Öffentlich",
   "community_enterName": "Bitte Community-Name eingeben",
-  "community_title": "Community",
+  "community_title": "Gemeinschaft",
   "community_created": "Community \"{name}\" wurde erstellt",
   "community_joined": "Community \"{name}\" beigetreten",
   "community_qrTitle": "Teile Community",
   "community_qrInstructions": "Scannen Sie diesen QR-Code, um sich \"{name}\" anzuschließen.",
   "community_hashtagPrivacyHint": "Community-Hashtag-Kanäle können nur von Mitgliedern der Community betreten werden",
-  "community_hashtagChannel": "Community Hashtag",
-  "community_name": "Community Name",
+  "community_hashtagChannel": "Gemeinschaftlicher Hashtag",
+  "community_name": "Name der Gemeinde",
   "community_invalidQrCode": "Ungültiger Community-QR-Code",
   "community_alreadyMember": "Bereits registriert",
   "community_alreadyMemberMessage": "Sie sind bereits Mitglied von \"{name}\".",
@@ -1506,7 +1634,7 @@
   "community_regularHashtagDesc": "Öffentlicher Hashtag (jeder kann teilnehmen)",
   "community_communityHashtagDesc": "Nur für Mitglieder der Community",
   "community_forCommunity": "Für {name}",
-  "community_communityHashtag": "Community Hashtag",
+  "community_communityHashtag": "Gemeinschaftlicher Hashtag",
   "@community_regenerateSecretConfirm": {
     "placeholders": {
       "name": {
@@ -1906,7 +2034,7 @@
   "connectionChoiceTcpLabel": "TCP",
   "tcpHostHint": "192.168.40.10",
   "tcpScreenTitle": "Verbinden über TCP",
-  "tcpPortLabel": "Port",
+  "tcpPortLabel": "Hafen",
   "tcpPortHint": "5000",
   "tcpStatus_notConnected": "Geben Sie den Endpunkt ein und verbinden Sie sich.",
   "tcpStatus_connectingTo": "Verbindung zu {endpoint}...",
@@ -1916,5 +2044,435 @@
   "tcpErrorTimedOut": "Die TCP-Verbindung ist abgelaufen.",
   "tcpConnectionFailed": "Fehler beim TCP-Verbindungsaufbau: {error}",
   "map_showDiscoveryContacts": "Entdeckungs-Kontakte anzeigen",
-  "map_setAsMyLocation": "Als meine aktuelle Position festlegen"
+  "map_setAsMyLocation": "Als meine aktuelle Position festlegen",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_allowByContact": "Zulassen durch Kontaktflaggen",
+  "settings_privacy": "Datenschutzeinstellungen",
+  "settings_allowAll": "Alles zulassen",
+  "settings_privacySettingsDescription": "Wählen Sie die Informationen, die Ihr Gerät mit anderen teilt.",
+  "settings_denyAll": "Alle ablehnen",
+  "settings_privacySubtitle": "Steuern Sie die Informationen, die freigegeben werden.",
+  "settings_telemetryLocationMode": "Telemetrie-Ortsmodus",
+  "settings_telemetryEnvironmentMode": "Telemetrie-Umgebungsmodus",
+  "settings_advertLocation": "Anzeigenort",
+  "settings_advertLocationSubtitle": "Ort in der Anzeige einbeziehen",
+  "settings_telemetryBaseMode": "Telemetrie-Basismodus",
+  "contact_teleBase": "Telemetriebasis",
+  "contact_teleBaseSubtitle": "Erlauben des Freigebens des Batteriestands und der grundlegenden Telemetrie",
+  "contact_teleLoc": "Telemetrieort",
+  "contact_teleLocSubtitle": "Teilen von Standortdaten zulassen",
+  "contact_info": "Kontaktinformationen",
+  "contact_settings": "Kontakteinstellungen",
+  "contact_telemetry": "Telemetrie",
+  "contact_teleEnv": "Telemetrieumgebung",
+  "contact_lastSeen": "Zuletzt gesehen",
+  "contact_clearChat": "Chat löschen",
+  "contact_teleEnvSubtitle": "Teilen von Umgebungsensordaten zulassen",
+  "appSettings_initialRouteWeightSubtitle": "Ausgangsgewicht für neu entdeckte Pfade",
+  "appSettings_maxRouteWeightSubtitle": "Maximales Gewicht, das ein Weg durch erfolgreiche Lieferungen erreichen kann.",
+  "appSettings_maxRouteWeight": "Maximale Gesamtstreckenlänge",
+  "appSettings_initialRouteWeight": "Anfangs-Streckengewicht",
+  "appSettings_routeWeightSuccessIncrement": "Erhöhung des Erfolgsgewichts",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Gewicht, das einem Pfad nach erfolgreicher Lieferung hinzugefügt wird.",
+  "appSettings_routeWeightFailureDecrement": "Reduzierung des Gewichts bei Fehlern",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Gewicht, das nach einem fehlgeschlagenen Versand von einem Weg entfernt wurde",
+  "appSettings_maxMessageRetries": "Maximale Anzahl an Wiederholungsversuchen",
+  "appSettings_maxMessageRetriesSubtitle": "Anzahl der Versuche, eine Nachricht erneut zu senden, bevor sie als fehlgeschlagen markiert wird.",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Telemetriemodus aktualisiert",
+  "map_showOverlaps": "Überlappungen der Repeater-Taste",
+  "map_runTraceWithReturnPath": "Auf dem gleichen Pfad zurückkehren.",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "chat_sendCooldown": "Bitte warten Sie einen Moment, bevor Sie erneut senden.",
+  "appSettings_jumpToOldestUnread": "Zum ältesten, nicht gelesenen Eintrag springen",
+  "appSettings_languageHu": "Ungarisch",
+  "appSettings_jumpToOldestUnreadSubtitle": "Wenn Sie ein Chatfenster öffnen, in dem Nachrichten vorhanden sind, die noch nicht gelesen wurden, scrollen Sie zu der ersten unlesenen Nachricht, anstatt zur neuesten.",
+  "appSettings_languageJa": "Japanisch",
+  "appSettings_languageKo": "Koreanisch",
+  "radioStats_tooltip": "Daten zu Radio- und Mesh-Netzwerken",
+  "radioStats_screenTitle": "Senderinformationen",
+  "radioStats_notConnected": "Verbinden Sie ein Gerät, um Radiostatisiken anzuzeigen.",
+  "radioStats_firmwareTooOld": "Für die Verwendung der Funkstatistiken ist die Firmware-Version 8 oder höher erforderlich.",
+  "radioStats_waiting": "Warte auf Daten…",
+  "radioStats_noiseFloor": "Rauschpegel: {noiseDbm} dBm",
+  "radioStats_lastRssi": "Letzter RSSI-Wert: {rssiDbm} dBm",
+  "radioStats_lastSnr": "Letzter SNR: {snr} dB",
+  "radioStats_txAir": "Gesamt-TX-Zeit: {seconds} s",
+  "radioStats_rxAir": "Gesamt-RX-Zeit: {seconds} s",
+  "radioStats_chartCaption": "Rauschpegel (dBm) basierend auf den letzten Messwerten.",
+  "radioStats_stripNoise": "Rauschpegel: {noiseDbm} dBm",
+  "radioStats_stripWaiting": "Abrufen von Radiostatus…",
+  "radioStats_settingsTile": "Senderinformationen",
+  "radioStats_settingsSubtitle": "Rauschpegel, RSSI, Signal-Rausch-Verhältnis (SNR) und Nutzzeit",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_title": "Übersetzung",
+  "translation_composerTitle": "Übersetzen Sie vor dem Versenden",
+  "translation_enableSubtitle": "Nachrichten empfangen und übersetzen sowie die Möglichkeit bieten, Nachrichten vor dem Versenden zu übersetzen.",
+  "translation_enableTitle": "Aktivieren Sie die Übersetzung",
+  "translation_composerSubtitle": "Steuert den Standardzustand des Icons für die Übersetzung des Komponisten.",
+  "translation_autoIncomingTitle": "Nachrichten automatisch übersetzen",
+  "translation_autoIncomingSubtitle": "Übersetzt Nachrichten für Benachrichtigungen sowie für Chats oder Kanäle automatisch.",
+  "translation_translateMessage": "Nachricht übersetzen",
+  "translation_targetLanguage": "Zielsprache",
+  "translation_useAppLanguage": "Verwenden Sie die App-Sprache",
+  "translation_downloadedModelLabel": "Heruntergeladenes Modell",
+  "translation_presetModelLabel": "Vordefinierter Hugging Face-Modell",
+  "translation_manualUrlLabel": "URL für das manuelle Modell",
+  "translation_downloadModel": "Modell herunterladen",
+  "translation_downloading": "Herunterladen...",
+  "translation_working": "Arbeiten...",
+  "translation_stop": "Stopp",
+  "translation_mergingChunks": "Zusammenführen der heruntergeladenen Teile in die finale Datei...",
+  "translation_downloadedModels": "Heruntergeladene Modelle",
+  "translation_deleteModel": "Modell löschen",
+  "translation_modelDownloaded": "Übersetzungsmotor heruntergeladen.",
+  "translation_downloadStopped": "Herunterladen abgebrochen.",
+  "translation_downloadFailed": "Download fehlgeschlagen: {error}",
+  "translation_enterUrlFirst": "Geben Sie zunächst die URL eines Modells ein.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_messageTranslation": "Nachricht übersetzen",
+  "translation_composerEnabledHint": "Die Nachrichten werden vor dem Versenden übersetzt.",
+  "translation_translateBeforeSending": "Übersetzen Sie vor dem Versenden",
+  "translation_composerDisabledHint": "Nachrichten in der ursprünglichen, getippten Sprache senden.",
+  "translation_translateTo": "Übersetzen Sie auf {language}",
+  "translation_translationOptions": "Übersetzungsmöglichkeiten",
+  "translation_systemLanguage": "Sprache des Systems",
+  "scanner_linuxPairingShowPin": "PIN anzeigen",
+  "scanner_linuxPairingHidePin": "PIN ausblenden",
+  "scanner_linuxPairingPinTitle": "Bluetooth-Paarungs-PIN",
+  "scanner_linuxPairingPinPrompt": "Geben Sie die PIN für {deviceName} ein (leer lassen, falls keine).",
+  "repeater_cliQuickClockSync": "Uhr Synchronisieren",
+  "repeater_cliQuickDiscovery": "Entdecke Nachbarn",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLogin": "Uhrzeit-Synchronisation nach dem Anmelden",
+  "repeater_clockSyncAfterLoginSubtitle": "Automatisch \"Uhrzeit-Synchronisierung\" nach erfolgreicher Anmeldung senden.",
+  "repeater_guest": "Informationen zu Repeatern",
+  "repeater_guestTools": "Gastwerkzeuge",
+  "chat_sendMessage": "Nachricht senden",
+  "room_guest": "Informationen zum Room Server",
+  "repeater_getCategory": "Werte erhalten",
+  "repeater_powerMgmt": "Energieverwaltung",
+  "repeater_sensors": "Sensoren",
+  "repeater_cliHelpPowerOff": "Schaltet das Gerät aus. (keine Antwort erwartet)",
+  "repeater_cliHelpClkReboot": "Setzt die Uhr auf einen bekannten Zeitpunkt zurück und startet das Gerät neu.",
+  "repeater_cliHelpAdvertZeroHop": "Sendet eine Werbeanzeige, die nur an unmittelbare Nachbarn gesendet wird (ohne Zwischenstation).",
+  "repeater_cliHelpStartOta": "Startet ein Firmware-Update über Funk, das auf unterstützten Boards durchgeführt wird.",
+  "repeater_cliHelpTime": "Stellt die Gerätuhr auf die angegebene Unix-Epoche in Sekunden ein. Die Uhr kann nicht rückwärts laufen.",
+  "repeater_cliHelpBoard": "Zeigt den Hersteller/die Hardware-Kennung an.",
+  "repeater_cliHelpDiscoverNeighbors": "Sendet eine Anfrage zur Entdeckung von Nachbarn in der Nähe. (Nur bei Repeatern)",
+  "repeater_cliHelpPowersaving": "Zeigt an, ob der Energiesparmodus aktiviert oder deaktiviert ist.",
+  "repeater_cliHelpPowersavingOnOff": "Aktiviert oder deaktiviert den Energiesparmodus (falls unterstützt).",
+  "repeater_cliHelpErase": "(Nur für serielle Schnittstellen) Formatiert das Dateisystem des Geräts. Löscht alle Einstellungen und Kontakte.",
+  "repeater_cliHelpSetDutyCycle": "Legt den maximal zulässigen Übertragungszyklus als Prozentsatz fest (1-100). Passt den Zeitfaktor intern an.",
+  "repeater_cliHelpSetPrvKey": "(Nur für serielle Anwendungen) Ersetzt den privaten Schlüssel zur Geräteidentifizierung. Nach der Anwendung ist ein Neustart erforderlich. Generiert einen neuen öffentlichen Schlüssel.",
+  "repeater_cliHelpSetRadioRxGain": "(Nur für SX126x) Schaltet die verstärkte RX-Verstärkung ein, um die Empfindlichkeit bei höherem Stromverbrauch zu verbessern.",
+  "repeater_cliHelpSetOwnerInfo": "Definiert den String mit den Kontaktinformationen des Eigentümers, der in den Anzeigen enthalten ist. Verwenden Sie '|' für Zeilenumbrüche.",
+  "repeater_cliHelpSetPathHashMode": "Legt den Modus für die Pfad-Hashes fest. 0 = ältere Version, 1 = Standard, 2 = streng. Beeinflusst, wie Routing-Pfade abgeglichen werden.",
+  "repeater_cliHelpSetLoopDetect": "Legt die Empfindlichkeit der Schleifenerkennung fest: aus, minimal, moderat oder streng.",
+  "repeater_cliHelpSetFreq": "(Nur für die serielle Schnittstelle) Ermöglicht die schnelle Einstellung der Frequenz. Nach der Einstellung ist ein Neustart erforderlich. Für die vollständige Einstellung aller Radio-Parameter wird die Option \"Radio einstellen\" empfohlen.",
+  "repeater_cliHelpSetBridgeChannel": "(Nur für ESPNow-Brücke) Legt den verwendeten WLAN-Kanal (1-14) für die Brücke fest.",
+  "repeater_cliHelpGetName": "Zeigt den konfigurierten Knotenamen an.",
+  "repeater_cliHelpGetRole": "Zeigt die Funktion der Firmware an (Repeater, Raumserver usw.).",
+  "repeater_cliHelpGetPublicKey": "Zeigt den öffentlichen Schlüssel des Geräts an.",
+  "repeater_cliHelpGetPrvKey": "(Nur für serielle Kommunikation) Zeigt den privaten Schlüssel des Geräts an. Behandeln Sie diesen als ein Geheimnis.",
+  "repeater_cliHelpGetRepeat": "Zeigt an, ob die Weiterleitung von Paketen (als Repeater) aktiviert oder deaktiviert ist.",
+  "repeater_cliHelpGetTx": "Zeigt die aktuelle Sendeleistung in dBm an.",
+  "repeater_cliHelpGetFreq": "Zeigt die konfigurierte Funkfrequenz in MHz an.",
+  "repeater_cliHelpGetRadio": "Zeigt alle Funkparameter an: Frequenz, Bandbreite, Spreading-Faktor, Codierungsrate.",
+  "repeater_cliHelpGetRadioRxGain": "(Nur für SX126x) Zeigt den Zustand des verstärkten Empfangs (RX).",
+  "repeater_cliHelpGetAf": "Zeigt den aktuellen Zeitfaktor an.",
+  "repeater_cliHelpGetDutyCycle": "Zeigt den aktuellen zulässigen Schaltzyklus als Prozentsatz an.",
+  "repeater_cliHelpGetIntThresh": "Zeigt den Grenzwert für Kanalüberlagerung in dB an.",
+  "repeater_cliHelpGetAgcResetInterval": "Zeigt das Intervall für die Rücksetzung des AGC in Sekunden an.",
+  "repeater_cliHelpGetMultiAcks": "Zeigt an, ob der Modus \"doppelte ACK\"-Funktion aktiviert (1) oder deaktiviert (0) ist.",
+  "repeater_cliHelpGetAllowReadOnly": "Zeigt an, ob der Zugriff für Gäste nur in Lesemodus erlaubt ist.",
+  "repeater_cliHelpGetAdvertInterval": "Zeigt die Dauer des lokalen Werbeintervalls in Minuten an.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Zeigt die Dauer der Werbeunterbrechung in Stunden an.",
+  "repeater_cliHelpGetGuestPassword": "Zeigt das konfigurierte Gast-Passwort an.",
+  "repeater_cliHelpGetLat": "Zeigt die konfigurierte Breitengrade.",
+  "repeater_cliHelpGetLon": "Zeigt die konfigurierte Länge an.",
+  "repeater_cliHelpGetRxDelay": "Zeigt den Basiswert für die Verzögerungszeit an.",
+  "repeater_cliHelpGetTxDelay": "Zeigt den Faktor für die Übertragungsverzögerung im Notfallmodus an.",
+  "repeater_cliHelpGetDirectTxDelay": "Zeigt den Faktor für die Verzögerung im Direktmodus an.",
+  "repeater_cliHelpGetFloodMax": "Zeigt die maximale Anzahl von Überschwemmungsphasen an.",
+  "repeater_cliHelpGetOwnerInfo": "Zeigt die Zeichenkette mit den Kontaktinformationen des Eigentümers an.",
+  "repeater_cliHelpGetPathHashMode": "Zeigt den Pfad-Hash-Modus (0/1/2) an.",
+  "repeater_cliHelpGetLoopDetect": "Zeigt die Empfindlichkeit der Schleifenerkennung an.",
+  "repeater_cliHelpGetAcl": "(Nur für serielle Kommunikation) Zeigt die Zugriffskontrolleinträge auf einem Repeater an.",
+  "repeater_cliHelpGetBridgeEnabled": "Zeigt an, ob die Brücke aktiviert ist.",
+  "repeater_cliHelpGetBridgeDelay": "Zeigt die Verzögerung der Brücke in Millisekunden an.",
+  "repeater_cliHelpGetBridgeSource": "Zeigt, ob die Brücke RX- oder TX-Pakete empfängt oder sendet.",
+  "repeater_cliHelpGetBridgeBaud": "(Nur für RS232-Verbindungen) Zeigt die Baudrate der Verbindung an.",
+  "repeater_cliHelpGetBridgeChannel": "(Nur für ESPNow-Brücke) Zeigt den WLAN-Kanal der Brücke an.",
+  "repeater_cliHelpGetBridgeSecret": "(Nur für ESPNow-Brücke) Zeigt das gemeinsam genutzte Geheimnis der Brücke.",
+  "repeater_cliHelpGetBootloaderVer": "(Nur für NRF52) Zeigt die Version des Bootloaders an.",
+  "repeater_cliHelpGetAdcMultiplier": "Zeigt den ADC-Verstärker (Spannungs-Skalierung) an.",
+  "repeater_cliHelpGetPwrMgtSupport": "Gibt an, ob der Verwaltungsrat die Funktion zur Energieverwaltung unterstützt.",
+  "repeater_cliHelpGetPwrMgtSource": "Zeigt die aktuelle Stromquelle an: extern oder Batterie.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Zeigt die aktuellsten Gründe für einen Neustart und Herunterfahren an.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Zeigt die Batteriespannung beim Start in Millivolt (mV) an.",
+  "repeater_cliHelpSensorGet": "Liest eine benutzerdefinierte Sensoreinstellung über eine Taste.",
+  "repeater_cliHelpSensorSet": "Erstellt eine benutzerdefinierte Sensoreinstellung.",
+  "repeater_cliHelpSensorList": "Zeigt alle benutzerdefinierten Sensoreinstellungen an, wobei die Seitennummerierung optional von einem Startindex abhängt.",
+  "repeater_cliHelpRegionDefault": "Zeigt den aktuellen Standard-Region-Bereich an.",
+  "repeater_cliHelpRegionDefaultSet": "Definiert den Standard-Regionenbereich. Verwenden Sie \"<null>\", um diesen zu löschen.",
+  "repeater_cliHelpRegionListAllowed": "Nennt die Regionen, die Überschwemmungsverkehr zulassen.",
+  "repeater_cliHelpRegionListDenied": "Auflistung von Regionen, die den Verkehr aufgrund von Überschwemmungen verbieten.",
+  "repeater_cliHelpStatsPackets": "(Nur für serielle Verbindungen) Zeigt Statistiken auf Paketebene.",
+  "repeater_cliHelpStatsRadio": "(Nur für Serien) Zeigt Radiostatistiken an.",
+  "repeater_cliHelpStatsCore": "(Nur für serielle Schnittstellen) Zeigt grundlegende Firmware-Statistiken.",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "settings_multiAck": "Mehrere Bestätigungen",
+  "map_sharedAt": "Geteilt",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losBlockedSpotsTitle": "Reservierte Plätze",
+  "losSelectedObstructionTitle": "Ausgewählte Behinderung",
+  "losBlockedSpotChip": "{distance} • {distanceUnit} • {obstruction} {heightUnit}",
+  "losBlockedSpotsHint": "Klicken Sie auf einen blockierten Bereich, um ihn auf der Karte hervorzuheben.",
+  "losSelectedObstructionDetails": "Blockiert durch {obstruction} in einer Höhe von {heightUnit}, {distanceFromA} von A und {distanceFromB} von B ({distanceUnit}).",
+  "chat_markAsUnread": "Als nicht gelesen markieren",
+  "chat_newMessages": "Neue Nachrichten",
+  "settings_companionDebugLog": "Debug-Protokoll für die Begleitsoftware",
+  "settings_companionDebugLogSubtitle": "BLE/TCP/USB-Befehle, Antworten und Rohdaten",
+  "repeater_chanUtil": "Nutzung des Kanals",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "messageStatus_sent": "Gesendet",
+  "messageStatus_delivered": "Geliefert",
+  "common_undo": "Rückgängig machen",
+  "messageStatus_pending": "Versenden",
+  "messageStatus_failed": "Nicht gesendet",
+  "messageStatus_repeated": "Wiederholt gehört",
+  "contacts_moreOptions": "Weitere Optionen",
+  "contacts_searchOpen": "Kontakte suchen",
+  "contacts_searchClose": "Erweiterte Suche",
+  "routing_title": "Routenplanung",
+  "routing_modeAuto": "Auto",
+  "routing_modeFlood": "Überschwemmung",
+  "routing_modeManual": "Handbuch",
+  "routing_modeFloodHint": "Übertragung über alle Repeater. Die zuverlässigste Methode, jedoch mit höherem Datenverbrauch.",
+  "routing_modeAutoHint": "Wählt automatisch den bekanntesten Pfad aus und verwendet eine Flutungsmethode, wenn kein Pfad bekannt ist.",
+  "routing_modeManualHint": "Sendet immer genau den von Ihnen festgelegten Weg.",
+  "routing_currentRoute": "Aktuelle Route",
+  "routing_directNoHops": "Direkt – ohne Zwischenverstärkung",
+  "routing_noPathYet": "Noch kein Pfad gefunden. Die Nachricht wird gesendet, bis ein Weg entdeckt wurde.",
+  "routing_floodBroadcast": "Übertragung über jeden Repeater",
+  "routing_editPath": "Pfad bearbeiten",
+  "routing_forgetPath": "Vergiss den Weg",
+  "routing_knownPaths": "Bekannte Routen",
+  "routing_knownPathsHint": "Wählen Sie den Pfad, um zu diesem zu wechseln.",
+  "routing_inUse": "Im Gebrauch",
+  "routing_qualityStrong": "Ein starker erster Sprung",
+  "routing_qualityGood": "Ein guter erster Schritt",
+  "routing_qualityFair": "Erster erfolgreicher Schritt",
+  "routing_qualityWorked": "Hat erfolgreich geliefert",
+  "routing_qualityFlood": "Information erhalten durch Nachrichten über die Überschwemmung",
+  "routing_qualityUntested": "Nicht getestet",
+  "routing_lastWorked": "war beschäftigt {when}",
+  "routing_neverWorked": "nie bestätigt",
+  "routing_floodDelivery": "Lieferung bei Überschwemmung",
+  "pathEditor_title": "Pfad erstellen",
+  "pathEditor_hopCounter": "{count} von 64 Hopfengewächsen",
+  "pathEditor_noHops": "Noch keine Hopfen hinzugefügt. Klicken Sie auf die Schaltflächen unten, um sie nacheinander hinzuzufügen, oder speichern Sie die Rezepter ohne Hopfen, um sie direkt zu versenden.",
+  "pathEditor_addHops": "Fügen Sie die Hopfen in der richtigen Reihenfolge hinzu.",
+  "pathEditor_searchRepeaters": "Suche nach wiederholten Nachrichten",
+  "pathEditor_advancedHex": "Fortgeschritten: Roh-Hex-Pfad",
+  "pathEditor_hexLabel": "Hex-Präfixe",
+  "pathEditor_hexHelper": "Zwei Hexadezimalzeichen pro Sprung, getrennt durch Kommas",
+  "pathEditor_invalidTokens": "Ungültig: {tokens}",
+  "pathEditor_tooManyHops": "Maximal 64 Hopfengreifer",
+  "pathEditor_usePath": "Verwenden Sie diesen Pfad.",
+  "pathEditor_removeHop": "Hop entfernen",
+  "pathEditor_unknownHop": "Unbekannter Repeater",
+  "map_zoomIn": "Zoomen",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "map_zoomOut": "Auszoomen",
+  "map_centerMap": "Zentralkarte",
+  "chrome_bluetoothRequiresChromium": "Web Bluetooth benötigt einen Chromium-Browser.",
+  "channels_communityShortId": "ID: {id}…",
+  "pathTrace_legendGpsConfirmed": "GPS-Bestätigung",
+  "pathTrace_legendInferred": "Abgeleitete Position"
 }

lib/l10n/app_es.arb

@@ -33,6 +33,8 @@
   "common_remove": "Eliminar",
   "common_enable": "Activar",
   "common_disable": "Desactivar",
+  "common_autoRefresh": "Actualización automática",
+  "common_interval": "Intervalo",
   "common_reboot": "Reiniciar",
   "common_loading": "Cargando...",
   "common_notAvailable": "—",
@@ -52,7 +54,7 @@
       }
     }
   },
-  "scanner_title": "MeshCore Open",
+  "scanner_title": "MeshCore: Versión abierta",
   "scanner_scanning": "Escaneando dispositivos...",
   "scanner_connecting": "Conectando...",
   "scanner_disconnecting": "Desconectando...",
@@ -104,6 +106,8 @@
   "settings_privacyModeEnabled": "Modo de privacidad activado",
   "settings_privacyModeDisabled": "Modo de privacidad desactivado",
   "settings_actions": "Acciones",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "Enviar Anuncio",
   "settings_sendAdvertisementSubtitle": "Presencia de transmisión ahora",
   "settings_advertisementSent": "Anuncio enviado",
@@ -121,7 +125,7 @@
   "settings_appDebugLog": "Registro de Depuración de la App",
   "settings_appDebugLogSubtitle": "Mensajes de depuración de la aplicación",
   "settings_about": "Acerca de",
-  "settings_aboutVersion": "MeshCore Open v{version}",
+  "settings_aboutVersion": "MeshCore Open versión {version}",
   "@settings_aboutVersion": {
     "placeholders": {
       "version": {
@@ -164,19 +168,19 @@
   "appSettings_themeDark": "Oscuro",
   "appSettings_language": "Idioma",
   "appSettings_languageSystem": "Predeterminado del sistema",
-  "appSettings_languageEn": "English",
-  "appSettings_languageFr": "Français",
+  "appSettings_languageEn": "Inglés",
+  "appSettings_languageFr": "Francés",
   "appSettings_languageEs": "Español",
-  "appSettings_languageDe": "Deutsch",
-  "appSettings_languagePl": "Polski",
-  "appSettings_languageSl": "Slovenščina",
-  "appSettings_languagePt": "Português",
+  "appSettings_languageDe": "Alemán",
+  "appSettings_languagePl": "Polaco",
+  "appSettings_languageSl": "Esloveno",
+  "appSettings_languagePt": "Portugués",
   "appSettings_languageIt": "Italiano",
-  "appSettings_languageZh": "中文",
-  "appSettings_languageSv": "Svenska",
-  "appSettings_languageNl": "Nederlands",
-  "appSettings_languageSk": "Slovenčina",
-  "appSettings_languageBg": "Български",
+  "appSettings_languageZh": "Chino",
+  "appSettings_languageSv": "Sueco",
+  "appSettings_languageNl": "Neerlandés",
+  "appSettings_languageSk": "Esloveno",
+  "appSettings_languageBg": "Bulgaro",
   "appSettings_notifications": "Notificaciones",
   "appSettings_enableNotifications": "Habilitar Notificaciones",
   "appSettings_enableNotificationsSubtitle": "Recibir notificaciones para mensajes y anuncios",
@@ -209,8 +213,8 @@
     }
   },
   "appSettings_batteryChemistryConnectFirst": "Conéctate a un dispositivo para elegir",
-  "appSettings_batteryNmc": "18650 NMC (3.0-4.2V)",
-  "appSettings_batteryLifepo4": "LiFePO4 (2.6-3.65V)",
+  "appSettings_batteryNmc": "18650 NMC (3,0-4,2 V)",
+  "appSettings_batteryLifepo4": "LiFePO4 (2.6-3.65 V)",
   "appSettings_batteryLipo": "LiPo (3.0-4.2V)",
   "appSettings_mapDisplay": "Visualización del Mapa",
   "appSettings_showRepeaters": "Mostrar Repetidores",
@@ -285,6 +289,7 @@
   "contacts_newGroup": "Nuevo Grupo",
   "contacts_groupName": "Nombre del grupo",
   "contacts_groupNameRequired": "El nombre del grupo es obligatorio",
+  "contacts_groupNameReserved": "Este nombre de grupo está reservado",
   "contacts_groupAlreadyExists": "El grupo \"{name}\" ya existe",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -297,7 +302,7 @@
   "contacts_noContactsMatchFilter": "No hay contactos que coincidan con tu filtro",
   "contacts_noMembers": "No miembros",
   "contacts_lastSeenNow": "Última vez que se vio ahora",
-  "contacts_lastSeenMinsAgo": "~ {minutes} min.",
+  "contacts_lastSeenMinsAgo": "~ {minutes} minutos",
   "@contacts_lastSeenMinsAgo": {
     "placeholders": {
       "minutes": {
@@ -336,11 +341,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "Canal con hashtag",
   "channels_public": "Público",
   "channels_private": "Privado",
-  "channels_publicChannel": "Canal público",
-  "channels_privateChannel": "Canal privado",
   "channels_editChannel": "Editar canal",
   "channels_muteChannel": "Silenciar canal",
   "channels_unmuteChannel": "Activar canal",
@@ -387,6 +389,22 @@
     }
   },
   "channels_smazCompression": "Compresión SMAZ",
+  "channels_cyr2latCompression": "Compresión Cyr2Lat",
+  "channels_cyr2latCompressionDscr": "Reemplaza algunos caracteres cirílicos con caracteres latinos al enviar.",
+  "channels_cyr2latSettingsHeading": "Configuración de Cyr2Lat",
+  "channels_cyr2latSettingsSubheading": "Lista de sustituciones",
+  "channels_cyr2latSettingsDscr": "Editar la configuración JSON de sustitución de caracteres",
+  "channels_cyr2latSettingsDialogHint": "Mapa JSON de sustituciones",
+  "channels_cyr2latSettingsDialogWrongJSON": "JSON incorrecto: {error}",
+  "settings_cyr2latProfileAdd": "Añadir perfil Cyr2Lat",
+  "settings_cyr2latProfileName": "Nombre del perfil",
+  "settings_cyr2latProfileNameEmpty": "El nombre del perfil no puede estar vacío",
+  "settings_cyr2latProfileAdded": "Perfil añadido correctamente",
+  "settings_cyr2latProfileUpdated": "Perfil actualizado correctamente",
+  "settings_cyr2latProfileEdit": "Editar perfil Cyr2Lat",
+  "settings_cyr2latProfileDelete": "Eliminar perfil Cyr2Lat",
+  "settings_cyr2latProfileDeleted": "Perfil eliminado correctamente",
+  "settings_cyr2latProfileDeleteDscr": "¿Está seguro de que desea eliminar el perfil \"{name}\"?",
   "channels_channelUpdated": "Canal \"{name}\" actualizado",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -398,7 +416,7 @@
   "channels_publicChannelAdded": "Canal público añadido",
   "channels_sortBy": "Ordenar por",
   "channels_sortManual": "Manual",
-  "channels_sortAZ": "A-Z",
+  "channels_sortAZ": "De la A a la Z",
   "channels_sortLatestMessages": "Últimos mensajes",
   "channels_sortUnread": "Sin leer",
   "chat_noMessages": "Aún no hay mensajes",
@@ -462,7 +480,7 @@
   "emojiCategoryObjects": "Objetos",
   "gifPicker_title": "Elegir un GIF",
   "gifPicker_searchHint": "Buscar GIFs...",
-  "gifPicker_poweredBy": "Powered by GIPHY",
+  "gifPicker_poweredBy": "Con tecnología de GIPHY",
   "gifPicker_noGifsFound": "No se encontraron GIFs",
   "gifPicker_failedLoad": "No se pudo cargar los GIFs",
   "gifPicker_failedSearch": "No se encontraron GIFs",
@@ -530,7 +548,7 @@
       }
     }
   },
-  "debugFrame_textTypeCli": "CLI",
+  "debugFrame_textTypeCli": "Interfaz de línea de comandos",
   "debugFrame_textTypePlain": "Sencillo",
   "debugFrame_text": "- Texto: \"{text}\"",
   "@debugFrame_text": {
@@ -549,7 +567,7 @@
   "chat_pathHistoryFull": "El historial de rutas está completo. Eliminar entradas para añadir nuevas.",
   "chat_hopSingular": "salta",
   "chat_hopPlural": "salta",
-  "chat_hopsCount": "{count} {count, plural, =1{hop} other{hops}}",
+  "chat_hopsCount": "{count} {count, plural, =1{salto} other{saltos}}",
   "@chat_hopsCount": {
     "placeholders": {
       "count": {
@@ -644,7 +662,7 @@
   "map_repeater": "Repetidor",
   "map_room": "Habitación",
   "map_sensor": "Sensor",
-  "map_pinDm": "Pin (DM)",
+  "map_pinDm": "Etiqueta (DM)",
   "map_pinPrivate": "Bloqueo (Privado)",
   "map_pinPublic": "Clave (Pública)",
   "map_lastSeen": "Última vez que se vio",
@@ -880,9 +898,9 @@
   "repeater_managementTools": "Herramientas de Gestión",
   "repeater_status": "Estado",
   "repeater_statusSubtitle": "Ver el estado, las estadísticas y los vecinos del repetidor",
-  "repeater_telemetry": "Telemetry",
+  "repeater_telemetry": "Telemetría",
   "repeater_telemetrySubtitle": "Ver la telemetría de los sensores y las estadísticas del sistema",
-  "repeater_cli": "CLI",
+  "repeater_cli": "Interfaz de línea de comandos",
   "repeater_cliSubtitle": "Enviar comandos al repetidor",
   "repeater_settings": "Configuración",
   "repeater_settingsSubtitle": "Configurar parámetros del repetidor",
@@ -1058,6 +1076,81 @@
   },
   "repeater_confirm": "Confirmar",
   "repeater_settingsSaved": "Guardado de ajustes exitoso",
+  "repeater_rxGain": "Aumento en la ganancia de RX",
+  "repeater_rxGainHelper": "Mayor sensibilidad, mayor consumo de corriente (solo para SX1262/SX1268)",
+  "repeater_refreshRxGain": "Aumenta el rendimiento de RX con la nueva versión.",
+  "repeater_multiAcks": "Múltiples respuestas de confirmación",
+  "repeater_multiAcksSubtitle": "Reconocer mensajes a través de múltiples vías para una mejor entrega.",
+  "repeater_refreshMultiAcks": "Reenviar múltiples confirmaciones",
+  "repeater_networkHealth": "Salud de la red",
+  "repeater_loopDetect": "Detección de bucles",
+  "repeater_loopDetectHelper": "Crea paquetes de \"flujo\" que parezcan bucles de enrutamiento.",
+  "repeater_loopDetectOff": "Fuera",
+  "repeater_loopDetectMinimal": "Mínimo",
+  "repeater_loopDetectModerate": "Moderado",
+  "repeater_loopDetectStrict": "Estrictos",
+  "repeater_dutyCycle": "Ciclo de trabajo",
+  "repeater_dutyCycleHelper": "Porcentaje máximo de tiempo de antena",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Información del operador",
+  "repeater_ownerInfoHelper": "Metadatos públicos para este repetidor",
+  "repeater_refreshOwnerInfo": "Actualizar información del operador",
+  "repeater_floodMax": "Máximo número de saltos en caso de inundación",
+  "repeater_floodMaxHelper": "Número máximo de paquetes de flujo que un nodo puede enviar (0-64)",
+  "repeater_advancedSettings": "Avanzado",
+  "repeater_advancedSettingsSubtitle": "Perillas de ajuste para operadores experimentados",
+  "repeater_pathHashMode": "Modo de hash de ruta",
+  "repeater_pathHashModeHelper": "Bytes utilizados para codificar el ID de este repetidor en las etiquetas de ruta/detección de bucles. 0=1 byte (256 IDs, hasta 64 saltos), 1=2 bytes (65.000 IDs, hasta 32 saltos), 2=3 bytes (16 millones de IDs, hasta 21 saltos). Las versiones 1.13 y anteriores de firmware eliminan rutas de múltiples bytes; solo se detectan una vez que la red está activa en la versión 1.14 o posterior.",
+  "repeater_txDelay": "Retraso en Flood, TX",
+  "repeater_txDelayHelper": "Ajuste de retransmisión para el tráfico de inundación, como un multiplicador del tiempo de transmisión del paquete (0-2, valor predeterminado 0.5). Un valor más alto significa menos colisiones, pero una entrega más lenta.",
+  "repeater_directTxDelay": "Retraso directo en TX",
+  "repeater_directTxDelayHelper": "Reenvío de espacios para el tráfico directo (no masivo), como un multiplicador del tiempo de transmisión del paquete (0-2, valor predeterminado 0.3).",
+  "repeater_intThresh": "Límite de interferencia",
+  "repeater_intThreshHelper": "Se establece un umbral para la calibración del nivel de ruido de la radio, de modo que rechaza las interferencias que superen este nivel. 0 deshabilita — solo aumente este valor si observa errores en una banda de frecuencia con mucho ruido.",
+  "repeater_agcResetInterval": "Intervalo de reinicio de AGC",
+  "repeater_agcResetIntervalHelper": "¿Con qué frecuencia se debe restablecer el control automático de ganancia del radio para recuperarse de un estado de ganancia bloqueada? Se puede restablecer cada pocos segundos, o cada 4 segundos. Desactivar la función de restablecimiento periódico.",
+  "repeater_actionsTitle": "Acciones",
+  "repeater_sendAdvert": "Enviar anuncio sobre inundaciones",
+  "repeater_sendAdvertSubtitle": "Transmite un anuncio sobre inundaciones a través de la red.",
+  "repeater_sendAdvertZeroHop": "Enviar anuncio sin intermediarios",
+  "repeater_sendAdvertZeroHopSubtitle": "Transmite un anuncio de un solo salto (sin retransmisiones).",
+  "repeater_clockSync": "Sincronizar reloj ahora",
+  "repeater_clockSyncSubtitle": "Envía la hora de tu teléfono al repetidor.",
+  "repeater_actionSucceeded": "{action} succeeded",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} failed: {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Configuración guardada — reinicie el repetidor para aplicar los cambios.",
+  "repeater_settingsPartialFailure": "Algunas configuraciones no se pudieron aplicar: {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "Error al guardar la configuración: {error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1069,11 +1162,9 @@
   "repeater_refreshBasicSettings": "Actualizar Configuración Básica",
   "repeater_refreshRadioSettings": "Actualizar Ajustes de Radio",
   "repeater_refreshTxPower": "Actualizar TX de energía",
-  "repeater_refreshLocationSettings": "Actualizar Configuración de Ubicación",
   "repeater_refreshPacketForwarding": "Actualizar Enrutamiento de Paquetes",
   "repeater_refreshGuestAccess": "Actualizar Acceso Invitados",
   "repeater_refreshPrivacyMode": "Actualizar Modo Privacidad",
-  "repeater_refreshAdvertisementSettings": "Actualizar Configuración de Anuncios",
   "repeater_refreshed": "{label} actualizado",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1191,6 +1282,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "Entrada digital",
+  "telemetry_digitalOutputLabel": "Salida digital",
+  "telemetry_analogInputLabel": "Entrada analógica",
+  "telemetry_analogOutputLabel": "Salida analógica",
+  "telemetry_genericLabel": "Sensor genérico",
+  "telemetry_luminosityLabel": "Luminosidad",
+  "telemetry_presenceLabel": "Presencia",
+  "telemetry_humidityLabel": "Humedad",
+  "telemetry_accelerometerLabel": "Acelerómetro",
+  "telemetry_pressureLabel": "Presión",
+  "telemetry_altitudeLabel": "Altitud",
+  "telemetry_frequencyLabel": "Frecuencia",
+  "telemetry_percentageLabel": "Porcentaje",
+  "telemetry_concentrationLabel": "Concentración",
+  "telemetry_powerLabel": "Potencia",
+  "telemetry_distanceLabel": "Distancia",
+  "telemetry_energyLabel": "Energía",
+  "telemetry_directionLabel": "Dirección",
+  "telemetry_timeLabel": "Hora",
+  "telemetry_gyrometerLabel": "Girómetro",
+  "telemetry_colourLabel": "Color",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Interruptor",
+  "telemetry_polylineLabel": "Polilínea",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Número de solicitudes",
+  "telemetry_error": "No se pudieron obtener los datos",
   "telemetry_noData": "No hay datos de telemetría disponibles.",
   "telemetry_channelTitle": "Canal {channel}",
   "@telemetry_channelTitle": {
@@ -1346,7 +1474,7 @@
   "listFilter_sortBy": "Ordenar por",
   "listFilter_latestMessages": "Últimos mensajes",
   "listFilter_heardRecently": "Escuchado recientemente",
-  "listFilter_az": "A-Z",
+  "listFilter_az": "De la A a la Z",
   "listFilter_filters": "Filtros",
   "listFilter_all": "Todas",
   "listFilter_users": "Usuarios",
@@ -1916,5 +2044,435 @@
   "tcpErrorTimedOut": "La conexión TCP ha caducado.",
   "tcpConnectionFailed": "Error en la conexión TCP: {error}",
   "map_showDiscoveryContacts": "Mostrar Contactos de Descubrimiento",
-  "map_setAsMyLocation": "Establecer mi ubicación"
+  "map_setAsMyLocation": "Establecer mi ubicación",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_privacySubtitle": "Controlar qué información se comparte.",
+  "settings_allowByContact": "Permitir por banderas de contacto",
+  "settings_denyAll": "Denegar todo",
+  "settings_telemetryBaseMode": "Modo base de telemetría",
+  "settings_telemetryEnvironmentMode": "Modo de entorno de telemetría",
+  "settings_advertLocationSubtitle": "Incluir ubicación en anuncio",
+  "contact_info": "Información de contacto",
+  "settings_privacySettingsDescription": "Elige qué información comparte tu dispositivo con otros.",
+  "settings_allowAll": "Permitir todo",
+  "settings_privacy": "Configuración de privacidad",
+  "contact_settings": "Configuración de contacto",
+  "settings_telemetryLocationMode": "Modo de ubicación de telemetría",
+  "contact_teleBase": "Base de Telemetría",
+  "contact_teleLoc": "Ubicación de telemetría",
+  "settings_advertLocation": "Ubicación de anuncio",
+  "contact_teleLocSubtitle": "Permitir el intercambio de datos de ubicación",
+  "contact_clearChat": "Borrar chat",
+  "contact_telemetry": "Telemetría",
+  "contact_lastSeen": "Visto por última vez",
+  "contact_teleBaseSubtitle": "Permitir el intercambio de nivel de batería y telemetría básica",
+  "contact_teleEnv": "Entorno de Telemetría",
+  "contact_teleEnvSubtitle": "Permitir el intercambio de datos de sensores de entorno",
+  "appSettings_initialRouteWeight": "Peso inicial de la ruta",
+  "appSettings_maxRouteWeight": "Peso máximo permitido para la ruta",
+  "appSettings_initialRouteWeightSubtitle": "Peso inicial para rutas recién descubiertas",
+  "appSettings_maxRouteWeightSubtitle": "Peso máximo que una ruta puede acumular gracias a entregas exitosas.",
+  "appSettings_routeWeightSuccessIncrement": "Incremento de peso para el éxito",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Peso añadido a una ruta después de una entrega exitosa.",
+  "appSettings_routeWeightFailureDecrement": "Reducción del peso asociado al fallo",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Peso retirado de un camino después de un intento de entrega fallido.",
+  "appSettings_maxMessageRetries": "Número máximo de reintentos de envío de mensajes",
+  "appSettings_maxMessageRetriesSubtitle": "Número de intentos de reintento antes de marcar un mensaje como fallido.",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Modo de telemetría actualizado",
+  "settings_multiAck": "Múltiples respuestas de confirmación",
+  "map_showOverlaps": "Superposiciones de tecla repetidora",
+  "map_runTraceWithReturnPath": "Volver atrás por el mismo camino.",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "appSettings_jumpToOldestUnread": "Salta a los mensajes más antiguos sin leer",
+  "chat_sendCooldown": "Por favor, espere un momento antes de reenviar.",
+  "appSettings_languageHu": "Húngaro",
+  "appSettings_jumpToOldestUnreadSubtitle": "Cuando abras una conversación con mensajes sin leer, desplázate hacia el primer mensaje sin leer en lugar del más reciente.",
+  "appSettings_languageJa": "Japonés",
+  "appSettings_languageKo": "Coreano",
+  "radioStats_tooltip": "Estadísticas de radio y malla",
+  "radioStats_screenTitle": "Estadísticas de radio",
+  "radioStats_notConnected": "Conéctese a un dispositivo para visualizar estadísticas de radio.",
+  "radioStats_firmwareTooOld": "Las estadísticas de radio requieren un firmware compatible v8 o posterior.",
+  "radioStats_waiting": "Esperando datos…",
+  "radioStats_noiseFloor": "Nivel de ruido: {noiseDbm} dBm",
+  "radioStats_lastRssi": "Último RSSI: {rssiDbm} dBm",
+  "radioStats_lastSnr": "Último SNR: {snr} dB",
+  "radioStats_txAir": "Tiempo de emisión en Texas (total): {seconds} s",
+  "radioStats_rxAir": "Tiempo de transmisión de RX (total): {seconds} s",
+  "radioStats_chartCaption": "Nivel de ruido (dBm) en muestras recientes.",
+  "radioStats_stripNoise": "Nivel de ruido: {noiseDbm} dBm",
+  "radioStats_stripWaiting": "Obteniendo estadísticas de la radio…",
+  "radioStats_settingsTile": "Estadísticas de radio",
+  "radioStats_settingsSubtitle": "Nivel de ruido, RSSI, SNR y tiempo de transmisión",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_title": "Traducción",
+  "translation_enableSubtitle": "Traducir los mensajes entrantes y permitir la traducción previa al envío.",
+  "translation_enableTitle": "Habilitar la traducción",
+  "translation_composerTitle": "Traducir antes de enviar",
+  "translation_composerSubtitle": "Controla el estado predeterminado del icono de traducción del compositor.",
+  "translation_autoIncomingTitle": "Traducir mensajes automáticamente",
+  "translation_autoIncomingSubtitle": "Traduce mensajes para notificaciones y para chats o canales automáticamente.",
+  "translation_translateMessage": "Traducir mensaje",
+  "translation_targetLanguage": "Idioma de destino",
+  "translation_useAppLanguage": "Utilizar el idioma de la aplicación",
+  "translation_downloadedModelLabel": "Modelo descargado",
+  "translation_presetModelLabel": "Modelo predefinido de Hugging Face",
+  "translation_manualUrlLabel": "URL del modelo manual",
+  "translation_downloadModel": "Descargar el modelo",
+  "translation_downloading": "Descargando...",
+  "translation_working": "Trabajando...",
+  "translation_stop": "¡Detente!",
+  "translation_mergingChunks": "Combinando los fragmentos descargados en el archivo final...",
+  "translation_downloadedModels": "Modelos descargados",
+  "translation_deleteModel": "Eliminar modelo",
+  "translation_modelDownloaded": "Modelo de traducción descargado.",
+  "translation_downloadStopped": "La descarga se ha detenido.",
+  "translation_downloadFailed": "No se pudo descargar: {error}",
+  "translation_enterUrlFirst": "Primero, introduzca la URL del modelo.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "scanner_linuxPairingPinPrompt": "Introduzca el código PIN para {deviceName} (deje en blanco si no hay ninguno).",
+  "scanner_linuxPairingShowPin": "Mostrar código PIN",
+  "scanner_linuxPairingPinTitle": "PIN para emparejar dispositivos Bluetooth",
+  "scanner_linuxPairingHidePin": "Ocultar PIN",
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerDisabledHint": "Envía mensajes utilizando el lenguaje escrito original.",
+  "translation_composerEnabledHint": "Los mensajes serán traducidos antes de ser enviados.",
+  "translation_messageTranslation": "Traducción del mensaje",
+  "translation_translateBeforeSending": "Traducir antes de enviar",
+  "translation_translateTo": "Traducir a {language}",
+  "translation_translationOptions": "Opciones de traducción",
+  "translation_systemLanguage": "Idioma del sistema",
+  "repeater_cliQuickDiscovery": "Descubrir Vecinos",
+  "repeater_cliQuickClockSync": "Sincronización del reloj",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLoginSubtitle": "Enviar automáticamente la función de \"sincronización de reloj\" después de un inicio de sesión exitoso.",
+  "repeater_clockSyncAfterLogin": "Sincronización del reloj después de iniciar sesión",
+  "repeater_guest": "Información sobre repetidores",
+  "chat_sendMessage": "Enviar mensaje",
+  "repeater_guestTools": "Herramientas para invitados",
+  "room_guest": "Información del servidor",
+  "repeater_getCategory": "Obtener valores",
+  "repeater_powerMgmt": "Gestión de la energía",
+  "repeater_sensors": "Sensores",
+  "repeater_cliHelpPowerOff": "Apaga el dispositivo. (no se espera respuesta)",
+  "repeater_cliHelpClkReboot": "Restablece el reloj a una fecha conocida y reinicia el dispositivo.",
+  "repeater_cliHelpAdvertZeroHop": "Envía un anuncio que no requiere saltos (solo para los vecinos inmediatos).",
+  "repeater_cliHelpStartOta": "Inicia una actualización de firmware por aire en las placas compatibles.",
+  "repeater_cliHelpTime": "Establece la hora del dispositivo en los segundos correspondientes a la época Unix. La hora no puede retroceder.",
+  "repeater_cliHelpBoard": "Muestra el fabricante de la placa base / identificador de hardware.",
+  "repeater_cliHelpDiscoverNeighbors": "Envía una solicitud de descubrimiento de nodos a los vecinos cercanos. (Solo para repetidores)",
+  "repeater_cliHelpPowersaving": "Indica si el modo de ahorro de energía está activado o desactivado.",
+  "repeater_cliHelpPowersavingOnOff": "Activa o desactiva el modo de ahorro de energía (si está disponible).",
+  "repeater_cliHelpErase": "(Solo para dispositivos) Formatea el sistema de archivos del dispositivo. Elimina todas las configuraciones y contactos.",
+  "repeater_cliHelpSetDutyCycle": "Establece el ciclo de transmisión máximo permitido como un porcentaje (1-100). Ajusta internamente el factor de tiempo de aire.",
+  "repeater_cliHelpSetPrvKey": "(Solo para series) Reemplaza la clave privada de identificación del dispositivo. Se requiere reiniciar para aplicar. Genera una nueva clave pública.",
+  "repeater_cliHelpSetRadioRxGain": "(Solo para SX126x) Activa/desactiva el amplificador de la RX para mejorar la sensibilidad a corrientes más altas.",
+  "repeater_cliHelpSetOwnerInfo": "Define la cadena de información de contacto del propietario que se incluye en los anuncios. Utilice '|' para indicar nuevas líneas.",
+  "repeater_cliHelpSetPathHashMode": "Establece el modo de hash de la ruta. 0 = antiguo, 1 = estándar, 2 = estricto. Afecta la forma en que se comparan las rutas.",
+  "repeater_cliHelpSetLoopDetect": "Establece la sensibilidad para la detección de bucles de enrutamiento: apagado, mínimo, moderado o estricto.",
+  "repeater_cliHelpSetFreq": "(Solo para la configuración de frecuencia) Establece rápidamente la frecuencia deseada. Se requiere reiniciar. Se recomienda utilizar la opción \"configurar radio\" para obtener todos los parámetros de la radio.",
+  "repeater_cliHelpSetBridgeChannel": "(Solo para el puente ESPNow) Establece el canal de WiFi (1-14) que utiliza el puente.",
+  "repeater_cliHelpGetName": "Muestra el nombre del nodo configurado.",
+  "repeater_cliHelpGetRole": "Muestra el rol del firmware (Repetidor, Servidor de habitación, etc.).",
+  "repeater_cliHelpGetPublicKey": "Muestra la clave pública del dispositivo.",
+  "repeater_cliHelpGetPrvKey": "(Solo para uso en serie) Muestra la clave privada del dispositivo. Trátala como una información confidencial.",
+  "repeater_cliHelpGetRepeat": "Indica si el enrutamiento de paquetes (función de repetidor) está activado o desactivado.",
+  "repeater_cliHelpGetTx": "Muestra la potencia actual en dBm.",
+  "repeater_cliHelpGetFreq": "Muestra la frecuencia de radio configurada en MHz.",
+  "repeater_cliHelpGetRadio": "Muestra todos los parámetros de radio: frecuencia, ancho de banda, factor de dispersión, tasa de codificación.",
+  "repeater_cliHelpGetRadioRxGain": "(Solo para SX126x) Muestra el estado de ganancia amplificada del receptor.",
+  "repeater_cliHelpGetAf": "Muestra el factor de tiempo actual.",
+  "repeater_cliHelpGetDutyCycle": "Muestra el ciclo de trabajo actual permitido como un porcentaje.",
+  "repeater_cliHelpGetIntThresh": "Muestra el umbral de interferencia del canal en dB.",
+  "repeater_cliHelpGetAgcResetInterval": "Muestra el intervalo de reinicio del AGC en segundos.",
+  "repeater_cliHelpGetMultiAcks": "Indica si el modo de confirmación doble está activado (1) o desactivado (0).",
+  "repeater_cliHelpGetAllowReadOnly": "Indica si se permite el acceso de solo lectura para los usuarios invitados.",
+  "repeater_cliHelpGetAdvertInterval": "Muestra el intervalo de publicidad local en minutos.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Muestra el intervalo de publicidad para la emisión de la señal de inundación, expresado en horas.",
+  "repeater_cliHelpGetGuestPassword": "Muestra la contraseña de invitado configurada.",
+  "repeater_cliHelpGetLat": "Muestra la latitud configurada.",
+  "repeater_cliHelpGetLon": "Muestra la longitud configurada.",
+  "repeater_cliHelpGetRxDelay": "Muestra el valor base de rxdelay.",
+  "repeater_cliHelpGetTxDelay": "Muestra el factor de retardo en modo de inundación.",
+  "repeater_cliHelpGetDirectTxDelay": "Muestra el factor de retardo en modo directo.",
+  "repeater_cliHelpGetFloodMax": "Muestra el número máximo de saltos por inundación.",
+  "repeater_cliHelpGetOwnerInfo": "Muestra la cadena de información de contacto del propietario.",
+  "repeater_cliHelpGetPathHashMode": "Muestra el modo de hash de ruta (0/1/2).",
+  "repeater_cliHelpGetLoopDetect": "Muestra la sensibilidad en la detección de bucles.",
+  "repeater_cliHelpGetAcl": "(Solo para series) Enumera las entradas de control de acceso en un repetidor.",
+  "repeater_cliHelpGetBridgeEnabled": "Indica si el puente está habilitado.",
+  "repeater_cliHelpGetBridgeDelay": "Muestra el retardo del puente en milisegundos.",
+  "repeater_cliHelpGetBridgeSource": "Indica si el puente está enviando o recibiendo paquetes RX o TX.",
+  "repeater_cliHelpGetBridgeBaud": "(Solo puente RS232) Muestra la velocidad de transmisión del puente.",
+  "repeater_cliHelpGetBridgeChannel": "(Solo para el puente ESPNow) Muestra el canal WiFi del puente.",
+  "repeater_cliHelpGetBridgeSecret": "(Solo para el puente ESPNow) Muestra el secreto compartido por el puente.",
+  "repeater_cliHelpGetBootloaderVer": "(Solo NRF52) Muestra la versión del cargador.",
+  "repeater_cliHelpGetAdcMultiplier": "Muestra el multiplicador del ADC (escalado de voltaje de la batería).",
+  "repeater_cliHelpGetPwrMgtSupport": "Indica si el sistema cuenta con funciones de gestión de energía.",
+  "repeater_cliHelpGetPwrMgtSource": "Indica la fuente de energía actual: externa o batería.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Muestra las razones más recientes de reinicio y apagado.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Muestra el voltaje de la batería al encender el sistema en milivoltios (mV).",
+  "repeater_cliHelpSensorGet": "Lee una configuración de sensor personalizada mediante una tecla.",
+  "repeater_cliHelpSensorSet": "Crea una configuración personalizada para un sensor.",
+  "repeater_cliHelpSensorList": "Muestra todas las configuraciones de sensores personalizadas, paginadas a partir de un índice de inicio opcional.",
+  "repeater_cliHelpRegionDefault": "Muestra el ámbito predeterminado actual.",
+  "repeater_cliHelpRegionDefaultSet": "Establece el ámbito regional predeterminado. Utilice \"<null>\" para restablecer a la configuración predeterminada.",
+  "repeater_cliHelpRegionListAllowed": "Enumera las regiones que permiten el paso de vehículos debido a inundaciones.",
+  "repeater_cliHelpRegionListDenied": "Enumera las regiones que prohíben el tráfico debido a las inundaciones.",
+  "repeater_cliHelpStatsPackets": "(Solo para series) Muestra estadísticas a nivel de paquetes.",
+  "repeater_cliHelpStatsRadio": "(Solo para transmisiones en serie) Muestra estadísticas de radio.",
+  "repeater_cliHelpStatsCore": "(Solo para series) Muestra estadísticas clave del firmware.",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "map_sharedAt": "Compartido",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losBlockedSpotsTitle": "Espacios ocupados",
+  "losBlockedSpotsHint": "Seleccione un punto bloqueado para resaltarlo en el mapa.",
+  "losSelectedObstructionTitle": "Obstrucción seleccionada",
+  "losSelectedObstructionDetails": "Bloqueado por {obstruction} a una altura de {heightUnit}, a {distanceFromA} metros de A y a {distanceFromB} metros de B ({distanceUnit}).",
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "settings_companionDebugLog": "Registro de depuración asociado",
+  "chat_newMessages": "Nuevos mensajes",
+  "settings_companionDebugLogSubtitle": "Comandos, respuestas y datos brutos para protocolos BLE/TCP/USB",
+  "chat_markAsUnread": "Marcar como no leído",
+  "repeater_chanUtil": "Utilización del canal",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "messageStatus_pending": "Enviar",
+  "common_undo": "Deshacer",
+  "messageStatus_sent": "Sentido",
+  "messageStatus_delivered": "Entregado",
+  "messageStatus_failed": "No se pudo enviar",
+  "messageStatus_repeated": "Escuché repetidamente",
+  "contacts_moreOptions": "Más opciones",
+  "contacts_searchOpen": "Buscar contactos",
+  "contacts_searchClose": "Búsqueda avanzada",
+  "routing_title": "Ruteo",
+  "routing_modeAuto": "Coche",
+  "routing_modeFlood": "Inundación",
+  "routing_modeManual": "Manual",
+  "routing_modeAutoHint": "Selecciona automáticamente la ruta más conocida, y si no hay ninguna ruta conocida, utiliza la ruta más directa.",
+  "routing_modeFloodHint": "Transmisiones a través de todos los repetidores. Es la opción más fiable, pero utiliza más tiempo de transmisión.",
+  "routing_modeManualHint": "Siempre sigue exactamente la ruta que usted ha definido.",
+  "routing_currentRoute": "Ruta actual",
+  "routing_directNoHops": "Directo — sin saltos de repetidor",
+  "routing_noPathYet": "Aún no hay un camino definido. El mensaje se envía continuamente hasta que se encuentre una ruta.",
+  "routing_floodBroadcast": "Transmisión a través de todos los repetidores.",
+  "routing_editPath": "Editar ruta",
+  "routing_forgetPath": "Olvídate del camino",
+  "routing_knownPaths": "Rutas conocidas",
+  "routing_knownPathsHint": "Seleccione una opción para cambiar a esa.",
+  "routing_inUse": "En uso",
+  "routing_qualityStrong": "Primer salto exitoso",
+  "routing_qualityGood": "Primer paso exitoso",
+  "routing_qualityWorked": "Ha cumplido",
+  "routing_qualityFair": "Primer salto de calidad",
+  "routing_qualityFlood": "Se ha escuchado a través de rumores.",
+  "routing_qualityUntested": "Sin probar",
+  "routing_lastWorked": "trabajó {when}",
+  "routing_neverWorked": "nunca confirmado",
+  "routing_floodDelivery": "Entrega por inundación",
+  "pathEditor_title": "Crear ruta",
+  "pathEditor_hopCounter": "{count} de 64 granos de lúpulo",
+  "pathEditor_noHops": "Aún no se han añadido lúpulos. Haga clic en los repetidores para añadirlos en el orden deseado, o guarde la receta sin lúpulos para enviarla directamente.",
+  "pathEditor_addHops": "Añadir los lúpulos en el orden adecuado.",
+  "pathEditor_searchRepeaters": "Buscar repetidores",
+  "pathEditor_advancedHex": "Avanzado: ruta hexadecimal sin procesar",
+  "pathEditor_hexLabel": "Prefijos hexadecimales",
+  "pathEditor_hexHelper": "Dos caracteres hexadecimales por salto, separados por comas.",
+  "pathEditor_invalidTokens": "Inválido: {tokens}",
+  "pathEditor_tooManyHops": "Máximo 64 saltos",
+  "pathEditor_usePath": "Utilice esta ruta.",
+  "pathEditor_removeHop": "Eliminar el lúpulo",
+  "pathEditor_unknownHop": "Repetidor desconocido",
+  "map_zoomIn": "Acercar",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "map_zoomOut": "Acercar",
+  "map_centerMap": "Mapa del centro",
+  "chrome_bluetoothRequiresChromium": "Web Bluetooth requiere un navegador Chromium.",
+  "channels_communityShortId": "ID: {id}...",
+  "pathTrace_legendGpsConfirmed": "Confirmado mediante GPS",
+  "pathTrace_legendInferred": "Posición inferida"
 }

lib/l10n/app_fr.arb

@@ -9,7 +9,7 @@
   },
   "@@locale": "fr",
   "appTitle": "MeshCore Open",
-  "nav_contacts": "Contacts",
+  "nav_contacts": "Coordonnées",
   "nav_channels": "Canaux",
   "nav_map": "Carte",
   "common_cancel": "Annuler",
@@ -33,6 +33,8 @@
   "common_remove": "Supprimer",
   "common_enable": "Activer",
   "common_disable": "Désactiver",
+  "common_autoRefresh": "Actualisation automatique",
+  "common_interval": "Intervalle",
   "common_reboot": "Redémarrer",
   "common_loading": "Chargement...",
   "common_notAvailable": "—",
@@ -104,6 +106,8 @@
   "settings_privacyModeEnabled": "Mode de confidentialité activé",
   "settings_privacyModeDisabled": "Mode de confidentialité désactivé",
   "settings_actions": "Actions",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "S'annoncer",
   "settings_sendAdvertisementSubtitle": "Présence diffusée maintenant",
   "settings_advertisementSent": "Annonce envoyée",
@@ -121,7 +125,7 @@
   "settings_appDebugLog": "Journal de débogage de l'application",
   "settings_appDebugLogSubtitle": "Messages de débogage de l'application",
   "settings_about": "À propos",
-  "settings_aboutVersion": "MeshCore Open v{version}",
+  "settings_aboutVersion": "MeshCore Open {version}",
   "@settings_aboutVersion": {
     "placeholders": {
       "version": {
@@ -132,7 +136,7 @@
   "settings_aboutLegalese": "Projet MeshCore Open Source 2026",
   "settings_aboutDescription": "Un client Flutter open source pour les appareils de réseau mesh MeshCore LoRa.",
   "settings_infoName": "Nom",
-  "settings_infoId": "ID",
+  "settings_infoId": "Numéro d'identification",
   "settings_infoStatus": "État",
   "settings_infoBattery": "Batterie",
   "settings_infoPublicKey": "Clé Publique",
@@ -143,8 +147,8 @@
   "settings_frequencyHelper": "300,0 - 2 500,0",
   "settings_frequencyInvalid": "Fréquence invalide (300-2500 MHz)",
   "settings_bandwidth": "Bande passante",
-  "settings_spreadingFactor": "Facteur de répartition",
-  "settings_codingRate": "Taux de codage",
+  "settings_spreadingFactor": "Facteur de répartition (SF)",
+  "settings_codingRate": "Taux de codage (CR)",
   "settings_txPower": "TX Puissance (dBm)",
   "settings_txPowerHelper": "0 - 22",
   "settings_txPowerInvalid": "Puissance TX invalide (0-22 dBm)",
@@ -164,19 +168,19 @@
   "appSettings_themeDark": "Sombre",
   "appSettings_language": "Langue",
   "appSettings_languageSystem": "Par défaut du système",
-  "appSettings_languageEn": "English",
+  "appSettings_languageEn": "Anglais",
   "appSettings_languageFr": "Français",
-  "appSettings_languageEs": "Español",
-  "appSettings_languageDe": "Deutsch",
-  "appSettings_languagePl": "Polski",
-  "appSettings_languageSl": "Slovenščina",
-  "appSettings_languagePt": "Português",
-  "appSettings_languageIt": "Italiano",
-  "appSettings_languageZh": "中文",
-  "appSettings_languageSv": "Svenska",
-  "appSettings_languageNl": "Nederlands",
-  "appSettings_languageSk": "Slovenčina",
-  "appSettings_languageBg": "Български",
+  "appSettings_languageEs": "Espagnol",
+  "appSettings_languageDe": "Allemand",
+  "appSettings_languagePl": "Polonais",
+  "appSettings_languageSl": "Sloveno",
+  "appSettings_languagePt": "Portugais",
+  "appSettings_languageIt": "Italien",
+  "appSettings_languageZh": "Chinois",
+  "appSettings_languageSv": "Suédois",
+  "appSettings_languageNl": "Néerlandais",
+  "appSettings_languageSk": "Slovène",
+  "appSettings_languageBg": "Bulgare",
   "appSettings_notifications": "Notifications",
   "appSettings_enableNotifications": "Activer les Notifications",
   "appSettings_enableNotificationsSubtitle": "Recevoir des notifications pour les messages et les annonces",
@@ -254,7 +258,7 @@
   "appSettings_appDebugLoggingSubtitle": "Enregistrez les messages de débogage de l'application Log pour le dépannage.",
   "appSettings_appDebugLoggingEnabled": "Journalisation de débogage de l'application activée",
   "appSettings_appDebugLoggingDisabled": "Le débogage de l'application est désactivé.",
-  "contacts_title": "Contacts",
+  "contacts_title": "Coordonnées",
   "contacts_noContacts": "Aucun contact trouvé.",
   "contacts_contactsWillAppear": "Les contacts apparaîtront lorsque les appareils font leur annonce.",
   "contacts_searchContacts": "Rechercher des contacts...",
@@ -285,6 +289,7 @@
   "contacts_newGroup": "Nouveau Groupe",
   "contacts_groupName": "Nom du groupe",
   "contacts_groupNameRequired": "Le nom du groupe est obligatoire.",
+  "contacts_groupNameReserved": "Ce nom de groupe est réservé",
   "contacts_groupAlreadyExists": "Le groupe \"{name}\" existe déjà.",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -297,7 +302,7 @@
   "contacts_noContactsMatchFilter": "Aucun contact ne correspond à votre filtre.",
   "contacts_noMembers": "Aucun membre",
   "contacts_lastSeenNow": "Vu maintenant",
-  "contacts_lastSeenMinsAgo": "~ {minutes} min.",
+  "contacts_lastSeenMinsAgo": "~ {minutes} minutes.",
   "@contacts_lastSeenMinsAgo": {
     "placeholders": {
       "minutes": {
@@ -336,11 +341,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "Canal avec hashtag",
   "channels_public": "Public",
   "channels_private": "Privé",
-  "channels_publicChannel": "Canal public",
-  "channels_privateChannel": "Canal privé",
   "channels_editChannel": "Modifier le canal",
   "channels_muteChannel": "Désactiver les notifications du canal",
   "channels_unmuteChannel": "Réactiver les notifications du canal",
@@ -366,7 +368,7 @@
   "channels_channelName": "Nom du canal",
   "channels_usePublicChannel": "Utiliser le canal public",
   "channels_standardPublicPsk": "PSK public standard",
-  "channels_pskHex": "PSK (Hex)",
+  "channels_pskHex": "PSK (Hexadécimal)",
   "channels_generateRandomPsk": "Générer une clé de modulation PSK aléatoire",
   "channels_enterChannelName": "Veuillez entrer un nom de canal",
   "channels_pskMustBe32Hex": "Le PKS doit être composé de 32 caractères hexadécimaux.",
@@ -387,6 +389,22 @@
     }
   },
   "channels_smazCompression": "Compression SMAZ",
+  "channels_cyr2latCompression": "Compression Cyr2Lat",
+  "channels_cyr2latCompressionDscr": "Remplace certains caractères cyrilliques par des caractères latins lors de l'envoi.",
+  "channels_cyr2latSettingsHeading": "Paramètres Cyr2Lat",
+  "channels_cyr2latSettingsSubheading": "Liste des remplacements",
+  "channels_cyr2latSettingsDscr": "Modifier la configuration JSON des remplacements de caractères",
+  "channels_cyr2latSettingsDialogHint": "Tableau de remplacement JSON",
+  "channels_cyr2latSettingsDialogWrongJSON": "JSON incorrect : {error}",
+  "settings_cyr2latProfileAdd": "Ajouter un profil Cyr2Lat",
+  "settings_cyr2latProfileName": "Nom du profil",
+  "settings_cyr2latProfileNameEmpty": "Le nom du profil ne peut pas être vide",
+  "settings_cyr2latProfileAdded": "Profil ajouté avec succès",
+  "settings_cyr2latProfileUpdated": "Profil mis à jour avec succès",
+  "settings_cyr2latProfileEdit": "Modifier le profil Cyr2Lat",
+  "settings_cyr2latProfileDelete": "Supprimer le profil Cyr2Lat",
+  "settings_cyr2latProfileDeleted": "Profil supprimé avec succès",
+  "settings_cyr2latProfileDeleteDscr": "Êtes-vous sûr de vouloir supprimer le profil \"{name}\"?",
   "channels_channelUpdated": "Le canal \"{name}\" a été mis à jour",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -495,7 +513,7 @@
     }
   },
   "debugFrame_textMessageHeader": "Message :",
-  "debugFrame_destinationPubKey": "- Destination PubKey: {pubKey}",
+  "debugFrame_destinationPubKey": "- Clé publique de destination : {pubKey}",
   "@debugFrame_destinationPubKey": {
     "placeholders": {
       "pubKey": {
@@ -566,7 +584,7 @@
   "chat_clearPath": "Effacer le chemin",
   "chat_clearPathSubtitle": "Forcer la redécouverte lors de la prochaine envoi",
   "chat_pathCleared": "Le chemin est dégagé. Le prochain message redécouvrira le tracé.",
-  "chat_floodModeSubtitle": "Utiliser le commutateur de routage dans la barre d'application",
+  "chat_floodModeSubtitle": "Désactive l'apprentissage du chemin (à éviter). Utiliser le commutateur de routage dans la barre d'application pour rebasculer en mode auto par la suite.",
   "chat_floodModeEnabled": "Le mode envoi à tout le réseau est activé. Changer via l'icône de routage dans la barre d'outils.",
   "chat_fullPath": "Chemin complet",
   "chat_pathDetailsNotAvailable": "Les détails du chemin ne sont pas encore disponibles. Essayez d'envoyer un message pour rafraîchir.",
@@ -640,9 +658,9 @@
       }
     }
   },
-  "map_chat": "Chat",
+  "map_chat": "Conversation",
   "map_repeater": "Répéteur",
-  "map_room": "Salle",
+  "map_room": "Room Server",
   "map_sensor": "Capteur",
   "map_pinDm": "Clé (DM)",
   "map_pinPrivate": "Verrouiller (Privé)",
@@ -681,7 +699,7 @@
   "map_showSharedMarkers": "Afficher les marqueurs partagés",
   "map_lastSeenTime": "Dernière fois vu",
   "map_sharedPin": "Clé partagée",
-  "map_joinRoom": "Rejoindre la salle",
+  "map_joinRoom": "Rejoindre le room server",
   "map_manageRepeater": "Gérer le répéteur",
   "mapCache_title": "Cache de Carte Hors Ligne",
   "mapCache_selectAreaFirst": "Sélectionner une zone pour la mise en cache en premier",
@@ -864,7 +882,7 @@
   "path_labelHexPrefixes": "Préfixes hexadécimaux",
   "path_helperMaxHops": "Max 64 sauts. Chaque préfixe fait 2 caractères hexadécimaux (1 octet)",
   "path_selectFromContacts": "Sélectionner à partir des contacts :",
-  "path_noRepeatersFound": "Aucun répéteur ou serveur de salle n'a été trouvé.",
+  "path_noRepeatersFound": "Aucun répéteur ou room server n'a été trouvé.",
   "path_customPathsRequire": "Les chemins personnalisés nécessitent des sauts intermédiaires qui peuvent transmettre des messages.",
   "path_invalidHexPrefixes": "Préfixes hexadécimaux invalides : {prefixes}",
   "@path_invalidHexPrefixes": {
@@ -993,17 +1011,17 @@
   "repeater_frequencyMhz": "Fréquence (MHz)",
   "repeater_frequencyHelper": "300-2500 MHz",
   "repeater_txPower": "TX Puissance",
-  "repeater_txPowerHelper": "1-30 dBm",
+  "repeater_txPowerHelper": "1 à 30 dBm",
   "repeater_bandwidth": "Bande passante",
-  "repeater_spreadingFactor": "Facteur de répartition",
-  "repeater_codingRate": "Taux de codage",
+  "repeater_spreadingFactor": "Facteur de répartition (SF)",
+  "repeater_codingRate": "Taux de codage (CR)",
   "repeater_locationSettings": "Paramètres de localisation",
   "repeater_latitude": "Latitude",
   "repeater_latitudeHelper": "Degrés décimaux (par exemple, 37.7749)",
   "repeater_longitude": "Longitude",
   "repeater_longitudeHelper": "Degrés décimaux (par exemple, -122,4194)",
   "repeater_features": "Fonctionnalités",
-  "repeater_packetForwarding": "Transfert de paquets",
+  "repeater_packetForwarding": "Mode répéteur",
   "repeater_packetForwardingSubtitle": "Activer le répéteur pour transmettre des paquets",
   "repeater_guestAccess": "Accès Invité",
   "repeater_guestAccessSubtitle": "Autoriser l'accès invité en lecture seule",
@@ -1058,6 +1076,81 @@
   },
   "repeater_confirm": "Confirmer",
   "repeater_settingsSaved": "Les paramètres ont été enregistrés avec succès.",
+  "repeater_rxGain": "Augmentation du rendement de RX",
+  "repeater_rxGainHelper": "Meilleure sensibilité, consommation de courant plus élevée (uniquement pour les modèles SX1262/SX1268)",
+  "repeater_refreshRxGain": "Renforcer les gains de RX grâce à la mise à jour",
+  "repeater_multiAcks": "Plusieurs accusés de réception",
+  "repeater_multiAcksSubtitle": "Valider les messages via plusieurs chemins pour une meilleure livraison.",
+  "repeater_refreshMultiAcks": "Renvoyer plusieurs accusés de réception",
+  "repeater_networkHealth": "Santé du réseau",
+  "repeater_loopDetect": "Détection de boucles",
+  "repeater_loopDetectHelper": "Envoyer des paquets de données qui semblent former des boucles de routage.",
+  "repeater_loopDetectOff": "Prix",
+  "repeater_loopDetectMinimal": "Minimal",
+  "repeater_loopDetectModerate": "Modéré",
+  "repeater_loopDetectStrict": "Strict",
+  "repeater_dutyCycle": "Cycle de fonctionnement",
+  "repeater_dutyCycleHelper": "Pourcentage maximal de temps d'antenne",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Informations sur l'opérateur",
+  "repeater_ownerInfoHelper": "Métadonnées publiques pour cet émetteur",
+  "repeater_refreshOwnerInfo": "Rafraîchir les informations sur l'opérateur",
+  "repeater_floodMax": "Nombre maximal de sauts lors des inondations",
+  "repeater_floodMaxHelper": "Nombre maximal de paquets de données qu'un flux peut transmettre (0-64)",
+  "repeater_advancedSettings": "Avancé",
+  "repeater_advancedSettingsSubtitle": "Molettes de réglage pour les opérateurs expérimentés",
+  "repeater_pathHashMode": "Mode de hachage de chemin",
+  "repeater_pathHashModeHelper": "Octets utilisés pour encoder l'ID de ce routeur dans les balises de détection de flux/boucles. 0 = 1 octet (256 ID, jusqu'à 64 sauts), 1 = 2 octets (65 000 ID, jusqu'à 32 sauts), 2 = 3 octets (16 millions d'ID, jusqu'à 21 sauts). Les versions 1.13 et antérieures utilisent des chemins multi-octets ; à partir de la version 1.14, cela n'est plus nécessaire.",
+  "repeater_txDelay": "Retard dû aux inondations à Texas",
+  "repeater_txDelayHelper": "Rétransmettre l'espacement pour le trafic de secours en cas de inondation, en multipliant le temps d'émission du paquet (0-2, valeur par défaut : 0,5). Une valeur plus élevée signifie moins de collisions, mais une vitesse de transmission plus lente.",
+  "repeater_directTxDelay": "Retard de transmission direct",
+  "repeater_directTxDelayHelper": "Rétransmettre l'espacement pour le trafic direct (non-inondation), en multipliant le temps de transmission des paquets (0-2, valeur par défaut : 0,3).",
+  "repeater_intThresh": "Seuil de perturbation",
+  "repeater_intThreshHelper": "Seuil dépassé pour la calibration du niveau de bruit de la radio, afin de rejeter les interférences supérieures à ce niveau. 0 désactive – ne mettez cette valeur que si vous constatez des erreurs RX dans une bande de fréquences bruyante.",
+  "repeater_agcResetInterval": "Interval de réinitialisation de l'AGC",
+  "repeater_agcResetIntervalHelper": "À quelle fréquence réinitialiser le contrôle automatique du gain de la radio pour revenir à un état normal ? Chaque seconde, ou à chaque multiple de 4. Désactiver la réinitialisation périodique avec 0.",
+  "repeater_actionsTitle": "Actions",
+  "repeater_sendAdvert": "Envoyer une publicité sur les inondations",
+  "repeater_sendAdvertSubtitle": "Diffuser une publicité sur les inondations via le réseau.",
+  "repeater_sendAdvertZeroHop": "Envoyer une publicité sans intermédiaire",
+  "repeater_sendAdvertZeroHopSubtitle": "Diffuser une publicité d'un seul saut (sans relais)",
+  "repeater_clockSync": "Synchroniser l'heure maintenant",
+  "repeater_clockSyncSubtitle": "Envoyez l'heure de votre téléphone au répéteur.",
+  "repeater_actionSucceeded": "{action} a réussi",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} a échoué : {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Paramètres sauvegardés — redémarrer le répéteur pour appliquer les modifications.",
+  "repeater_settingsPartialFailure": "Certaines configurations ont échoué : {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "Erreur lors de la sauvegarde des paramètres : {error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1069,11 +1162,9 @@
   "repeater_refreshBasicSettings": "Rafraîchir les paramètres de base",
   "repeater_refreshRadioSettings": "Rafraîchir les paramètres Radio",
   "repeater_refreshTxPower": "Rafraîchir la tension TX",
-  "repeater_refreshLocationSettings": "Rafraîchir les paramètres de localisation",
   "repeater_refreshPacketForwarding": "Rafraîchir le routage des paquets",
   "repeater_refreshGuestAccess": "Rafraîchir l'accès invité",
   "repeater_refreshPrivacyMode": "Rafraîchir le Mode Confidentialité",
-  "repeater_refreshAdvertisementSettings": "Rafraîchir les Paramètres des annonces",
   "repeater_refreshed": "{label} rafraîchi",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1191,6 +1282,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "Entrée numérique",
+  "telemetry_digitalOutputLabel": "Sortie numérique",
+  "telemetry_analogInputLabel": "Entrée analogique",
+  "telemetry_analogOutputLabel": "Sortie analogique",
+  "telemetry_genericLabel": "Capteur générique",
+  "telemetry_luminosityLabel": "Luminosité",
+  "telemetry_presenceLabel": "Présence",
+  "telemetry_humidityLabel": "Humidité",
+  "telemetry_accelerometerLabel": "Accéléromètre",
+  "telemetry_pressureLabel": "Pression",
+  "telemetry_altitudeLabel": "Altitude",
+  "telemetry_frequencyLabel": "Fréquence",
+  "telemetry_percentageLabel": "Pourcentage",
+  "telemetry_concentrationLabel": "Concentration",
+  "telemetry_powerLabel": "Puissance",
+  "telemetry_distanceLabel": "Distance",
+  "telemetry_energyLabel": "Énergie",
+  "telemetry_directionLabel": "Direction",
+  "telemetry_timeLabel": "Heure",
+  "telemetry_gyrometerLabel": "Gyromètre",
+  "telemetry_colourLabel": "Couleur",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Interrupteur",
+  "telemetry_polylineLabel": "Polyligne",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Nombre de requêtes",
+  "telemetry_error": "Impossible de récupérer les données",
   "telemetry_noData": "Aucune donnée de télémétrie disponible.",
   "telemetry_channelTitle": "Canal {channel}",
   "@telemetry_channelTitle": {
@@ -1351,7 +1479,7 @@
   "listFilter_all": "Tout",
   "listFilter_users": "Utilisateurs",
   "listFilter_repeaters": "Répéteurs",
-  "listFilter_roomServers": "Room servers",
+  "listFilter_roomServers": "Serveurs de salle",
   "listFilter_unreadOnly": "Messages non lus seulement",
   "listFilter_newGroup": "Nouveau groupe",
   "@neighbors_errorLoading": {
@@ -1376,7 +1504,7 @@
   "channels_joinPublicChannelDesc": "Tout le monde peut rejoindre ce canal.",
   "channels_joinHashtagChannel": "Rejoindre un Canal Hashtag",
   "channels_joinHashtagChannelDesc": "N'importe qui peut rejoindre les canaux #hashtag.",
-  "channels_scanQrCode": "Scanner un code QR",
+  "channels_scanQrCode": "Scanner un QR code",
   "channels_scanQrCodeComingSoon": "Bientôt disponible",
   "channels_enterHashtag": "Entrez le hashtag",
   "channels_hashtagHint": "ex. #equipe",
@@ -1458,15 +1586,15 @@
       }
     }
   },
-  "common_ok": "OK",
+  "common_ok": "D'accord",
   "community_title": "Communauté",
   "community_create": "Créer une Communauté",
   "community_createDesc": "Créer une nouvelle communauté et la partager via QR code.",
   "community_join": "Rejoindre",
   "community_joinTitle": "Rejoindre la communauté",
   "community_joinConfirmation": "Souhaitez-vous rejoindre la communauté \"{name}\" ?",
-  "community_scanQr": "Scanner la communauté QR",
-  "community_scanInstructions": "Pointez l'appareil photo vers un code QR communautaire.",
+  "community_scanQr": "Scanner un QR code de communauté",
+  "community_scanInstructions": "Pointez l'appareil photo vers un QR code de communauté.",
   "community_showQr": "Afficher le QR Code",
   "community_publicChannel": "Communauté Publique",
   "community_hashtagChannel": "Hashtag Communauté",
@@ -1477,13 +1605,13 @@
   "community_qrTitle": "Partager Communauté",
   "community_qrInstructions": "Scanner ce QR code pour rejoindre {name}",
   "community_hashtagPrivacyHint": "Les canaux hashtag de la communauté ne sont accessibles qu'aux membres de la communauté",
-  "community_invalidQrCode": "Code QR de communauté non valide",
+  "community_invalidQrCode": "QR code de communauté non valide",
   "community_alreadyMember": "Déjà membre",
   "community_alreadyMemberMessage": "Vous êtes déjà membre de \"{name}\".",
   "community_addPublicChannel": "Ajouter un Canal Public de la Communauté",
   "community_addPublicChannelHint": "Ajouter automatiquement le canal public pour cette communauté",
   "community_noCommunities": "Aucun groupe n'a été rejoint pour le moment.",
-  "community_scanOrCreate": "Scanner un code QR ou créer une communauté pour commencer",
+  "community_scanOrCreate": "Scanner un QR code ou créer une communauté pour commencer",
   "community_manageCommunities": "Gérer les Communautés",
   "community_delete": "Quitter la communauté",
   "community_deleteConfirm": "Quitter \"{name}\" ?",
@@ -1533,10 +1661,10 @@
     }
   },
   "community_regenerateSecret": "Régénérer le secret",
-  "community_regenerateSecretConfirm": "Régénérer la clé secrète pour \"{name}\" ? Tous les membres devront scanner le nouveau code QR pour continuer à communiquer.",
+  "community_regenerateSecretConfirm": "Régénérer la clé secrète pour \"{name}\" ? Tous les membres devront scanner le nouveau QR code pour continuer à communiquer.",
   "community_regenerate": "Régénérer",
   "community_secretRegenerated": "Mot de passe secret régénéré pour \"{name}\"",
-  "community_scanToUpdateSecret": "Scanner le nouveau code QR pour mettre à jour le mot de passe pour \"{name}\"",
+  "community_scanToUpdateSecret": "Scanner le nouveau QR code pour mettre à jour le mot de passe pour \"{name}\"",
   "community_updateSecret": "Mettre à jour le secret",
   "community_secretUpdated": "Modification secrète mise à jour pour \"{name}\"",
   "@contacts_pathTraceTo": {
@@ -1553,11 +1681,11 @@
   "contacts_pathTrace": "Traçage de chemin",
   "contacts_repeaterPathTrace": "Tracer le chemin vers le répéteur",
   "contacts_repeaterPing": "Pinguer le répéteur",
-  "contacts_roomPathTrace": "Traçage du chemin vers le serveur de la salle",
+  "contacts_roomPathTrace": "Traçage du chemin vers le room server",
   "contacts_chatTraceRoute": "Tracer le chemin",
   "contacts_pathTraceTo": "Tracer l'itinéraire vers {name}",
   "contacts_ping": "Ping",
-  "contacts_roomPing": "Pinguer le serveur de la salle",
+  "contacts_roomPing": "Pinguer le room server",
   "contacts_invalidAdvertFormat": "Données de contact non valides",
   "appSettings_languageUk": "Ukrainien",
   "appSettings_languageRu": "Russe",
@@ -1582,12 +1710,12 @@
   "notification_newNodesCount": "{count} {count, plural, =1{nouveau nœud} other{nouveaux nœuds}}",
   "notification_newTypeDiscovered": "Nouveau {contactType} découvert",
   "notification_receivedNewMessage": "Nouveau message reçu",
-  "settings_gpxExportRepeaters": "Exporter les répéteurs / serveur de salle au format GPX",
+  "settings_gpxExportRepeaters": "Exporter les répéteurs / room servers au format GPX",
   "settings_gpxExportRepeatersSubtitle": "Exporte les répéteurs / roomserver avec une localisation vers un fichier GPX.",
   "settings_gpxExportNoContacts": "Aucun contact à exporter.",
   "settings_gpxExportNotAvailable": "Non pris en charge sur votre appareil/Système d'exploitation",
   "settings_gpxExportError": "Une erreur s'est produite lors de l'exportation.",
-  "settings_gpxExportRepeatersRoom": "Emplacements des serveurs de répéteur et de salle",
+  "settings_gpxExportRepeatersRoom": "Emplacements des répéteurs et room servers",
   "settings_gpxExportContacts": "Exporter les compagnons au format GPX",
   "settings_gpxExportAll": "Exporter tous les contacts au format GPX",
   "settings_gpxExportAllSubtitle": "Exporte tous les contacts avec une localisation vers un fichier GPX.",
@@ -1799,15 +1927,15 @@
   "contacts_unread": "Non lu",
   "contacts_searchFavorites": "Rechercher {number}{str} Favoris...",
   "contacts_searchUsers": "Rechercher {number}{str} utilisateurs...",
-  "contacts_searchRoomServers": "Rechercher {number}{str} serveurs de salle...",
+  "contacts_searchRoomServers": "Rechercher {number}{str} room server...",
   "contacts_searchRepeaters": "Rechercher {number}{str} Répéteurs...",
   "contacts_searchContactsNoNumber": "Rechercher des contacts...",
   "settings_contactSettings": "Paramètres de contact",
   "settings_contactSettingsSubtitle": "Paramètres pour l'ajout de contacts",
   "contactsSettings_autoAddRepeatersTitle": "Ajouter automatiquement les répéteurs",
   "contactsSettings_autoAddRepeatersSubtitle": "Autoriser le compagnon à ajouter automatiquement les répéteurs découverts",
-  "contactsSettings_autoAddRoomServersTitle": "Ajouter automatiquement les serveurs de salle",
-  "contactsSettings_autoAddRoomServersSubtitle": "Autoriser le compagnon à ajouter automatiquement les serveurs de salles découverts",
+  "contactsSettings_autoAddRoomServersTitle": "Ajouter automatiquement les room servers",
+  "contactsSettings_autoAddRoomServersSubtitle": "Autoriser le compagnon à ajouter automatiquement les room servers découverts",
   "contactsSettings_otherTitle": "Autres paramètres liés aux contacts",
   "contactsSettings_title": "Paramètres des contacts",
   "contactsSettings_autoAddUsersTitle": "Ajouter automatiquement les utilisateurs",
@@ -1888,5 +2016,442 @@
   "tcpErrorTimedOut": "La connexion TCP a expiré.",
   "tcpConnectionFailed": "Échec de la connexion TCP : {error}",
   "map_showDiscoveryContacts": "Afficher les contacts de découverte",
-  "map_setAsMyLocation": "Définir comme ma localisation"
+  "map_setAsMyLocation": "Définir comme ma localisation",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_privacy": "Paramètres de confidentialité",
+  "settings_privacySubtitle": "Contrôlez les informations partagées",
+  "settings_telemetryLocationMode": "Mode d'emplacement de télémétrie",
+  "settings_telemetryEnvironmentMode": "Mode d'environnement de télémétrie",
+  "settings_advertLocation": "Emplacement de l'annonce",
+  "settings_advertLocationSubtitle": "Inclure l'emplacement dans l'annonce",
+  "settings_denyAll": "Refuser tout",
+  "settings_allowByContact": "Autoriser par drapeaux de contact",
+  "settings_privacySettingsDescription": "Choisissez les informations que votre appareil partage avec les autres.",
+  "settings_allowAll": "Autoriser tout",
+  "contact_info": "Informations de contact",
+  "settings_telemetryBaseMode": "Mode de base Télémétrie",
+  "contact_teleBase": "Base de télémétrie",
+  "contact_teleLoc": "Emplacement de télémétrie",
+  "contact_teleLocSubtitle": "Autoriser le partage des données de localisation",
+  "contact_teleEnv": "Environnement Télémétrie",
+  "contact_teleEnvSubtitle": "Autoriser le partage des données des capteurs d'environnement",
+  "contact_telemetry": "Télémétrie",
+  "contact_settings": "Paramètres de contact",
+  "contact_lastSeen": "Dernière fois vu",
+  "contact_clearChat": "Effacer la conversation",
+  "contact_teleBaseSubtitle": "Autoriser le partage du niveau de batterie et de la télémétrie de base",
+  "appSettings_maxRouteWeightSubtitle": "Poids maximal qu'un itinéraire peut accumuler grâce à des livraisons réussies.",
+  "appSettings_initialRouteWeight": "Poids initial de l'itinéraire",
+  "appSettings_maxRouteWeight": "Poids maximal autorisé pour le trajet",
+  "appSettings_initialRouteWeightSubtitle": "Poids de départ pour les nouveaux chemins découverts",
+  "appSettings_routeWeightSuccessIncrement": "Augmentation du poids de réussite",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Poids ajouté à un itinéraire après une livraison réussie.",
+  "appSettings_routeWeightFailureDecrement": "Réduction du poids de pénalité",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Poids retiré d'un itinéraire après une tentative de livraison infructueuse.",
+  "appSettings_maxMessageRetries": "Nombre maximal de tentatives de récupération de messages",
+  "appSettings_maxMessageRetriesSubtitle": "Nombre de tentatives de relance avant de marquer un message comme ayant échoué.",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Le mode télémétrie a été mis à jour",
+  "map_showOverlaps": "Chevauchement de la touche répétitive",
+  "map_runTraceWithReturnPath": "Revenir sur le même chemin.",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "chat_sendCooldown": "Veuillez patienter un instant avant de réessayer.",
+  "appSettings_jumpToOldestUnread": "Accéder au message le plus ancien non lu",
+  "appSettings_languageHu": "Hongrois",
+  "appSettings_jumpToOldestUnreadSubtitle": "Lorsque vous ouvrez une conversation contenant des messages non lus, faites défiler la page jusqu'au premier message non lu, plutôt que jusqu'au dernier.",
+  "appSettings_languageJa": "Japonais",
+  "appSettings_languageKo": "Coréen",
+  "radioStats_tooltip": "Statistiques des radios et des réseaux sans fil",
+  "radioStats_screenTitle": "Statistiques de radio",
+  "radioStats_notConnected": "Connectez-vous à un appareil pour visualiser les statistiques de la radio.",
+  "radioStats_firmwareTooOld": "Les statistiques radio nécessitent un firmware compatible v8 ou une version ultérieure.",
+  "radioStats_waiting": "En attente des données…",
+  "radioStats_noiseFloor": "Niveau de bruit : {noiseDbm} dBm",
+  "radioStats_lastRssi": "Dernier RSSI : {rssiDbm} dBm",
+  "radioStats_lastSnr": "Dernier SNR : {snr} dB",
+  "radioStats_txAir": "Temps d'antenne à la télévision du Texas (total) : {seconds} s",
+  "radioStats_rxAir": "Temps d'utilisation de l'appareil RX (total) : {seconds} s",
+  "radioStats_chartCaption": "Niveau de bruit (dBm) sur les échantillons récents.",
+  "radioStats_stripNoise": "Niveau de bruit : {noiseDbm} dBm",
+  "radioStats_stripWaiting": "Récupération des statistiques de la radio…",
+  "radioStats_settingsTile": "Statistiques de radio",
+  "radioStats_settingsSubtitle": "Niveau de bruit, RSSI, rapport signal/bruit (SNR) et temps d'antenne",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerTitle": "Traduire avant d'envoyer",
+  "translation_enableTitle": "Activer la traduction",
+  "translation_title": "Traduction",
+  "translation_enableSubtitle": "Traduire les messages entrants et permettre la traduction avant l'envoi.",
+  "translation_composerSubtitle": "Contrôle l'état par défaut de l'icône de traduction du composant.",
+  "translation_autoIncomingTitle": "Traduire automatiquement les messages",
+  "translation_autoIncomingSubtitle": "Traduit automatiquement les messages pour les notifications et pour les discussions ou les canaux.",
+  "translation_translateMessage": "Traduire le message",
+  "translation_targetLanguage": "Langue cible",
+  "translation_useAppLanguage": "Utiliser la langue de l'application",
+  "translation_downloadedModelLabel": "Modèle téléchargé",
+  "translation_presetModelLabel": "Modèle Hugging Face préconfiguré",
+  "translation_manualUrlLabel": "URL du modèle manuel",
+  "translation_downloadModel": "Télécharger le modèle",
+  "translation_downloading": "Téléchargement...",
+  "translation_working": "Au travail...",
+  "translation_stop": "Arrêtez",
+  "translation_mergingChunks": "Fusion des fragments téléchargés dans le fichier final...",
+  "translation_downloadedModels": "Modèles téléchargés",
+  "translation_deleteModel": "Supprimer le modèle",
+  "translation_modelDownloaded": "Modèle de traduction téléchargé.",
+  "translation_downloadStopped": "Le téléchargement a été interrompu.",
+  "translation_downloadFailed": "Échec du téléchargement : {error}",
+  "translation_enterUrlFirst": "Entrez d'abord l'URL du modèle.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerEnabledHint": "Les messages seront traduits avant d'être envoyés.",
+  "translation_translateBeforeSending": "Traduire avant d'envoyer",
+  "translation_composerDisabledHint": "Envoyez des messages dans la langue originale, telle que vous l'avez tapée.",
+  "translation_messageTranslation": "Traduction du message",
+  "translation_translateTo": "Traduire en {language}",
+  "translation_translationOptions": "Options de traduction",
+  "translation_systemLanguage": "Langue du système",
+  "scanner_linuxPairingPinTitle": "Code PIN pour la connexion Bluetooth",
+  "scanner_linuxPairingHidePin": "Masquer le code PIN",
+  "scanner_linuxPairingPinPrompt": "Entrez le code PIN pour {deviceName} (laissez vide si nécessaire).",
+  "scanner_linuxPairingShowPin": "Afficher le code PIN",
+  "repeater_cliQuickClockSync": "Synchronisation de l'horloge",
+  "repeater_cliQuickDiscovery": "Découvrir les voisins",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLoginSubtitle": "Envoyer automatiquement une notification \"synchronisation de l'heure\" après une connexion réussie.",
+  "repeater_clockSyncAfterLogin": "Synchronisation de l'horloge après la connexion",
+  "repeater_guestTools": "Outils pour les invités",
+  "chat_sendMessage": "Envoyer un message",
+  "room_guest": "Informations sur le serveur",
+  "repeater_guest": "Informations sur les répéteurs",
+  "@notification_messagesCount": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_getCategory": "Obtenir des valeurs",
+  "repeater_powerMgmt": "Gestion de l'énergie",
+  "repeater_sensors": "Capteurs",
+  "repeater_cliHelpPowerOff": "Éteint l'appareil. (aucune réponse n'est attendue)",
+  "repeater_cliHelpClkReboot": "Réinitialise l'horloge à une époque connue et redémarre l'appareil.",
+  "repeater_cliHelpAdvertZeroHop": "Envoie une publicité sans intermédiaire (uniquement aux voisins immédiats).",
+  "repeater_cliHelpStartOta": "Démarre une mise à jour du firmware par voie radio sur les cartes prises en charge.",
+  "repeater_cliHelpTime": "Définit l'heure de l'appareil sur les secondes de l'époque Unix spécifiée. L'heure ne peut pas reculer.",
+  "repeater_cliHelpBoard": "Indique le fabricant du panneau / l'identifiant du matériel.",
+  "repeater_cliHelpDiscoverNeighbors": "Envoie une requête de découverte de nœuds aux voisins proches. (Uniquement pour les répéteurs)",
+  "repeater_cliHelpPowersaving": "Indique si le mode d'économie d'énergie est activé ou désactivé.",
+  "repeater_cliHelpPowersavingOnOff": "Active ou désactive le mode d'économie d'énergie (si pris en charge).",
+  "repeater_cliHelpErase": "(Uniquement pour les appareils) Formate le système de fichiers de l'appareil. Efface tous les paramètres et les contacts.",
+  "repeater_cliHelpSetDutyCycle": "Définit le cycle de transmission maximal autorisé en pourcentage (de 1 à 100). Ajuste automatiquement le facteur de temps d'émission.",
+  "repeater_cliHelpSetPrvKey": "(Uniquement pour les séries) Remplace la clé privée d'identification de l'appareil. Un redémarrage est nécessaire pour appliquer. Génère une nouvelle clé publique.",
+  "repeater_cliHelpSetRadioRxGain": "(Uniquement pour les SX126x) Active le gain RX amplifié pour une meilleure sensibilité à des courants plus élevés.",
+  "repeater_cliHelpSetOwnerInfo": "Définit la chaîne d'informations de contact du propriétaire, qui figure dans les annonces. Utilisez '|' pour les sauts de ligne.",
+  "repeater_cliHelpSetPathHashMode": "Définit le mode de hachage de chemin. 0 = mode ancien, 1 = mode standard, 2 = mode strict. Influence la façon dont les chemins de routage sont correspondus.",
+  "repeater_cliHelpSetLoopDetect": "Définit la sensibilité de la détection des boucles de routage : désactivée, minimale, modérée ou stricte.",
+  "repeater_cliHelpSetFreq": "(Uniquement pour les modèles série) Permet de régler rapidement la fréquence. Redémarrage nécessaire. Il est préférable d'utiliser l'option \"réglage radio\" pour configurer tous les paramètres radio.",
+  "repeater_cliHelpSetBridgeChannel": "(Uniquement pour le pont ESPNow) Définit le canal WiFi (de 1 à 14) utilisé par le pont.",
+  "repeater_cliHelpGetName": "Affiche le nom du nœud configuré.",
+  "repeater_cliHelpGetRole": "Indique le rôle du firmware (répéteur, serveur de pièce, etc.).",
+  "repeater_cliHelpGetPublicKey": "Affiche la clé publique du dispositif.",
+  "repeater_cliHelpGetPrvKey": "(Uniquement pour les séries) Affiche la clé privée de l'appareil. Traitez-la comme une information confidentielle.",
+  "repeater_cliHelpGetRepeat": "Indique si le transfert de paquets (en tant que routeur) est activé ou désactivé.",
+  "repeater_cliHelpGetTx": "Indique la puissance actuelle en dBm.",
+  "repeater_cliHelpGetFreq": "Affiche la fréquence radio configurée en MHz.",
+  "repeater_cliHelpGetRadio": "Affiche tous les paramètres radio : fréquence, largeur de bande, facteur de dispersion, taux de codage.",
+  "repeater_cliHelpGetRadioRxGain": "(Uniquement pour les SX126x) Affiche l'état du gain amplifié de la réception.",
+  "repeater_cliHelpGetAf": "Indique le facteur de temps d'antenne actuel.",
+  "repeater_cliHelpGetDutyCycle": "Affiche le cycle de fonctionnement actuel autorisé en pourcentage.",
+  "repeater_cliHelpGetIntThresh": "Indique le seuil d'interférence du canal en dB.",
+  "repeater_cliHelpGetAgcResetInterval": "Indique l'intervalle de réinitialisation de l'AGC en secondes.",
+  "repeater_cliHelpGetMultiAcks": "Indique si le mode \"double ACK\" est activé (1) ou désactivé (0).",
+  "repeater_cliHelpGetAllowReadOnly": "Indique si l'accès en lecture seule pour les invités est autorisé.",
+  "repeater_cliHelpGetAdvertInterval": "Indique l'intervalle publicitaire local en minutes.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Indique l'intervalle publicitaire pour la diffusion de l'annonce en heures.",
+  "repeater_cliHelpGetGuestPassword": "Affiche le mot de passe invité configuré.",
+  "repeater_cliHelpGetLat": "Affiche la latitude configurée.",
+  "repeater_cliHelpGetLon": "Affiche la longitude configurée.",
+  "repeater_cliHelpGetRxDelay": "Affiche la valeur de base de rxdelay.",
+  "repeater_cliHelpGetTxDelay": "Indique le facteur de délai de transmission en mode inondation.",
+  "repeater_cliHelpGetDirectTxDelay": "Indique le facteur de délai direct.",
+  "repeater_cliHelpGetFloodMax": "Indique le nombre maximal de fois où le niveau de l'eau a atteint son point culminant.",
+  "repeater_cliHelpGetOwnerInfo": "Affiche la chaîne d'informations de contact du propriétaire.",
+  "repeater_cliHelpGetPathHashMode": "Affiche le mode \"hash de chemin\" (0/1/2).",
+  "repeater_cliHelpGetLoopDetect": "Illustre la sensibilité à la détection des boucles.",
+  "repeater_cliHelpGetAcl": "(Uniquement pour les séries) Liste les entrées de contrôle d'accès sur un répéteur.",
+  "repeater_cliHelpGetBridgeEnabled": "Indique si le pont est activé.",
+  "repeater_cliHelpGetBridgeDelay": "Indique le délai du pont en millisecondes.",
+  "repeater_cliHelpGetBridgeSource": "Indique si le pont transmet des paquets RX ou TX.",
+  "repeater_cliHelpGetBridgeBaud": "(Uniquement pour le pont RS232) Affiche la vitesse de communication du pont.",
+  "repeater_cliHelpGetBridgeChannel": "(Uniquement pour le pont ESPNow) Affiche le canal WiFi du pont.",
+  "repeater_cliHelpGetBridgeSecret": "(Uniquement pour le pont ESPNow) Affiche la clé partagée du pont.",
+  "repeater_cliHelpGetBootloaderVer": "(Uniquement pour le NRF52) Affiche la version du chargeur initial.",
+  "repeater_cliHelpGetAdcMultiplier": "Affiche le multiplicateur de l'ADC (mise à l'échelle de la tension de la batterie).",
+  "repeater_cliHelpGetPwrMgtSupport": "Indique si le système dispose de fonctionnalités de gestion de l'alimentation.",
+  "repeater_cliHelpGetPwrMgtSource": "Indique la source d'alimentation actuelle : externe ou batterie.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Indique les raisons les plus récentes de réinitialisation et d'arrêt.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Affiche la tension de la batterie au démarrage, en millivolts (mV).",
+  "repeater_cliHelpSensorGet": "Lit une valeur de configuration personnalisée pour un capteur en utilisant une touche.",
+  "repeater_cliHelpSensorSet": "Crée une configuration personnalisée pour un capteur.",
+  "repeater_cliHelpSensorList": "Affiche toutes les configurations de capteurs personnalisées, avec une pagination à partir d'un index de départ optionnel.",
+  "repeater_cliHelpRegionDefault": "Affiche la portée régionale par défaut actuelle.",
+  "repeater_cliHelpRegionDefaultSet": "Définit la portée régionale par défaut. Utilisez \"<null>\" pour la réinitialiser.",
+  "repeater_cliHelpRegionListAllowed": "Énumère les régions autorisant la circulation des véhicules en cas de inondation.",
+  "repeater_cliHelpRegionListDenied": "Liste des régions qui interdisent la circulation en cas de inondation.",
+  "repeater_cliHelpStatsPackets": "(Uniquement pour les séries) Affiche des statistiques au niveau des paquets.",
+  "repeater_cliHelpStatsRadio": "(Uniquement pour les séries) Affiche les statistiques de la radio.",
+  "repeater_cliHelpStatsCore": "(Uniquement pour les séries) Affiche les statistiques du micrologicem intégré.",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "settings_multiAck": "Plusieurs accusés de réception",
+  "map_sharedAt": "Partagé",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losSelectedObstructionTitle": "Obstruction sélectionnée",
+  "losBlockedSpotsTitle": "Places occupés",
+  "losBlockedSpotsHint": "Sélectionnez un emplacement bloqué pour le mettre en évidence sur la carte.",
+  "losSelectedObstructionDetails": "Bloqué par {obstruction}, à une hauteur de {heightUnit}, à une distance de {distanceFromA} par rapport à A et à une distance de {distanceFromB} par rapport à B ({distanceUnit}).",
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "settings_companionDebugLog": "Journal de débogage associé",
+  "chat_markAsUnread": "Signaler comme non lu",
+  "chat_newMessages": "Nouveaux messages",
+  "settings_companionDebugLogSubtitle": "Commandes, réponses et données brutes pour les protocoles BLE/TCP/USB",
+  "repeater_chanUtil": "Utilisation du canal",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "common_undo": "Annuler",
+  "messageStatus_sent": "Envoyer",
+  "messageStatus_delivered": "Livré",
+  "messageStatus_pending": "Envoyer",
+  "messageStatus_failed": "Échec de l'envoi",
+  "messageStatus_repeated": "Répété plusieurs fois",
+  "contacts_searchOpen": "Rechercher des contacts",
+  "contacts_moreOptions": "Plus d'options",
+  "contacts_searchClose": "Recherche avancée",
+  "routing_title": "Planification des itinéraires",
+  "routing_modeAuto": "Voiture",
+  "routing_modeFlood": "Inondation",
+  "routing_modeManual": "Manuel",
+  "routing_modeFloodHint": "Diffusion via tous les répéteurs. La méthode la plus fiable, mais qui utilise plus de temps d'antenne.",
+  "routing_modeAutoHint": "Sélectionne automatiquement le chemin le plus connu, et utilise la méthode de \"inondation\" si aucun chemin n'est connu.",
+  "routing_modeManualHint": "Il suit toujours le chemin précis que vous avez défini.",
+  "routing_currentRoute": "Itinéraire actuel",
+  "routing_directNoHops": "Direct — sans relais",
+  "routing_noPathYet": "Aucune voie encore trouvée. Le message suivant est envoyé jusqu'à ce qu'une route soit découverte.",
+  "routing_floodBroadcast": "Diffusion via tous les répéteurs",
+  "routing_editPath": "Modifier le chemin",
+  "routing_forgetPath": "Oubliez le chemin",
+  "routing_knownPaths": "Chemins connus",
+  "routing_knownPathsHint": "Créez un raccourci pour y accéder.",
+  "routing_inUse": "En cours d'utilisation",
+  "routing_qualityStrong": "Première étape réussie",
+  "routing_qualityGood": "Première étape réussie",
+  "routing_qualityFair": "Première étape réussie",
+  "routing_qualityWorked": "A livré",
+  "routing_qualityFlood": "Rapporté par des informations provenant de plusieurs sources.",
+  "routing_qualityUntested": "Non testé",
+  "routing_lastWorked": "a travaillé {when}",
+  "routing_neverWorked": "jamais confirmé",
+  "routing_floodDelivery": "Livraison en cas de inondation",
+  "pathEditor_hopCounter": "{count} parmi 64 houblons",
+  "pathEditor_title": "Créer un chemin",
+  "pathEditor_noHops": "Aucun houblon ajouté pour le moment. Cliquez sur les répétiteurs ci-dessous pour les ajouter dans l'ordre souhaité, ou enregistrez sans houblon pour envoyer directement.",
+  "pathEditor_addHops": "Ajoutez les houblons dans l'ordre souhaité.",
+  "pathEditor_searchRepeaters": "Rechercher des répétiteurs",
+  "pathEditor_advancedHex": "Avancé : chemin hexadécimal brut",
+  "pathEditor_hexLabel": "Préfixes hexadécimaux",
+  "pathEditor_hexHelper": "Deux caractères hexadécimaux par saut, séparés par des virgules.",
+  "pathEditor_invalidTokens": "Incorrect : {tokens}",
+  "pathEditor_tooManyHops": "Maximum 64 sauts",
+  "pathEditor_usePath": "Utilisez ce chemin.",
+  "pathEditor_removeHop": "Éliminer le haricot",
+  "pathEditor_unknownHop": "Répéteur non identifié",
+  "map_zoomIn": "Zoomez",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "map_zoomOut": "Zoomez",
+  "map_centerMap": "Carte du centre",
+  "chrome_bluetoothRequiresChromium": "Web Bluetooth nécessite un navigateur Chromium.",
+  "channels_communityShortId": "ID : {id}…",
+  "pathTrace_legendGpsConfirmed": "Le GPS a confirmé.",
+  "pathTrace_legendInferred": "Position déduite"
 }

lib/l10n/app_it.arb

@@ -33,6 +33,8 @@
   "common_remove": "Elimina",
   "common_enable": "Abilita",
   "common_disable": "Disattivare",
+  "common_autoRefresh": "Aggiornamento automatico",
+  "common_interval": "Intervallo",
   "common_reboot": "Riavvia",
   "common_loading": "Caricamento...",
   "common_notAvailable": "—",
@@ -104,6 +106,8 @@
   "settings_privacyModeEnabled": "Modalità privacy abilitata",
   "settings_privacyModeDisabled": "Modalità privacy disabilitata",
   "settings_actions": "Azioni",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "Invia Annuncio",
   "settings_sendAdvertisementSubtitle": "Presenza trasmessa ora",
   "settings_advertisementSent": "Annuncio inviato",
@@ -121,7 +125,7 @@
   "settings_appDebugLog": "Log di Debug dell'App",
   "settings_appDebugLogSubtitle": "Messaggi di debug dell'applicazione",
   "settings_about": "Informazioni",
-  "settings_aboutVersion": "MeshCore Open v{version}",
+  "settings_aboutVersion": "MeshCore Open versione {version}",
   "@settings_aboutVersion": {
     "placeholders": {
       "version": {
@@ -164,19 +168,19 @@
   "appSettings_themeDark": "Scuro",
   "appSettings_language": "Lingua",
   "appSettings_languageSystem": "Predefinito di sistema",
-  "appSettings_languageEn": "English",
-  "appSettings_languageFr": "Français",
-  "appSettings_languageEs": "Español",
-  "appSettings_languageDe": "Deutsch",
-  "appSettings_languagePl": "Polski",
-  "appSettings_languageSl": "Slovenščina",
-  "appSettings_languagePt": "Português",
+  "appSettings_languageEn": "Inglese",
+  "appSettings_languageFr": "Francese",
+  "appSettings_languageEs": "Spagnolo",
+  "appSettings_languageDe": "Tedesco",
+  "appSettings_languagePl": "Polacco",
+  "appSettings_languageSl": "Sloveno",
+  "appSettings_languagePt": "Portoghese",
   "appSettings_languageIt": "Italiano",
-  "appSettings_languageZh": "中文",
-  "appSettings_languageSv": "Svenska",
-  "appSettings_languageNl": "Nederlands",
-  "appSettings_languageSk": "Slovenčina",
-  "appSettings_languageBg": "Български",
+  "appSettings_languageZh": "Cinese",
+  "appSettings_languageSv": "Svedese",
+  "appSettings_languageNl": "Olandese",
+  "appSettings_languageSk": "Sloveno",
+  "appSettings_languageBg": "Bulgaro",
   "appSettings_notifications": "Notifiche",
   "appSettings_enableNotifications": "Abilita Notifiche",
   "appSettings_enableNotificationsSubtitle": "Ricevi notifiche per messaggi e annunci",
@@ -285,6 +289,7 @@
   "contacts_newGroup": "Nuovo Gruppo",
   "contacts_groupName": "Nome gruppo",
   "contacts_groupNameRequired": "Il nome del gruppo è obbligatorio.",
+  "contacts_groupNameReserved": "Questo nome del gruppo è riservato",
   "contacts_groupAlreadyExists": "Il gruppo \"{name}\" esiste già.",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -336,11 +341,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "Canale hashtag",
   "channels_public": "Pubblico",
   "channels_private": "Privato",
-  "channels_publicChannel": "Canale pubblico",
-  "channels_privateChannel": "Canale privato",
   "channels_editChannel": "Modifica canale",
   "channels_muteChannel": "Silenzia canale",
   "channels_unmuteChannel": "Attiva notifiche canale",
@@ -366,7 +368,7 @@
   "channels_channelName": "Nome canale",
   "channels_usePublicChannel": "Utilizza il canale pubblico",
   "channels_standardPublicPsk": "PSK pubblico standard",
-  "channels_pskHex": "PSK (Hex)",
+  "channels_pskHex": "PSK (esadecimale)",
   "channels_generateRandomPsk": "Genera una chiave di permutazione casuale",
   "channels_enterChannelName": "Inserisci un nome per il canale",
   "channels_pskMustBe32Hex": "PSK deve essere composto da 32 caratteri esadecimali.",
@@ -387,6 +389,22 @@
     }
   },
   "channels_smazCompression": "Compressione SMAZ",
+  "channels_cyr2latCompression": "Compressione Cyr2Lat",
+  "channels_cyr2latCompressionDscr": "Sostituisce alcuni caratteri cirillici con caratteri latini durante l'invio.",
+  "channels_cyr2latSettingsHeading": "Impostazioni Cyr2Lat",
+  "channels_cyr2latSettingsSubheading": "Elenco delle sostituzioni",
+  "channels_cyr2latSettingsDscr": "Modifica la configurazione JSON delle sostituzioni dei caratteri",
+  "channels_cyr2latSettingsDialogHint": "Mappa JSON delle sostituzioni",
+  "channels_cyr2latSettingsDialogWrongJSON": "JSON non corretto: {error}",
+  "settings_cyr2latProfileAdd": "Aggiungi profilo Cyr2Lat",
+  "settings_cyr2latProfileName": "Nome profilo",
+  "settings_cyr2latProfileNameEmpty": "Il nome del profilo non può essere vuoto",
+  "settings_cyr2latProfileAdded": "Profilo aggiunto con successo",
+  "settings_cyr2latProfileUpdated": "Profilo aggiornato con successo",
+  "settings_cyr2latProfileEdit": "Modifica profilo Cyr2Lat",
+  "settings_cyr2latProfileDelete": "Elimina profilo Cyr2Lat",
+  "settings_cyr2latProfileDeleted": "Profilo eliminato con successo",
+  "settings_cyr2latProfileDeleteDscr": "Sei sicuro di voler eliminare il profilo \"{name}\"?",
   "channels_channelUpdated": "Canale \"{name}\" aggiornato",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -398,7 +416,7 @@
   "channels_publicChannelAdded": "Canale pubblico aggiunto",
   "channels_sortBy": "Ordina per",
   "channels_sortManual": "Manuale",
-  "channels_sortAZ": "A-Z",
+  "channels_sortAZ": "D-Z",
   "channels_sortLatestMessages": "Ultimi messaggi",
   "channels_sortUnread": "Non letto",
   "chat_noMessages": "Nessun messaggio ancora",
@@ -455,7 +473,7 @@
   "chat_sendGif": "Invia GIF",
   "chat_reply": "Rispondi",
   "chat_addReaction": "Aggiungi Reazione",
-  "chat_me": "Me",
+  "chat_me": "Io",
   "emojiCategorySmileys": "Emoji",
   "emojiCategoryGestures": "Gesti",
   "emojiCategoryHearts": "Cuori",
@@ -503,7 +521,7 @@
       }
     }
   },
-  "debugFrame_timestamp": "- Timestamp: {timestamp}",
+  "debugFrame_timestamp": "- Marca temporale: {timestamp}",
   "@debugFrame_timestamp": {
     "placeholders": {
       "timestamp": {
@@ -880,7 +898,7 @@
   "repeater_managementTools": "Strumenti di Gestione",
   "repeater_status": "Stato",
   "repeater_statusSubtitle": "Visualizza lo stato, le statistiche e i vicini del ripetitore",
-  "repeater_telemetry": "Telemetry",
+  "repeater_telemetry": "Telemetria",
   "repeater_telemetrySubtitle": "Visualizza i dati di telemetria dei sensori e le statistiche di sistema",
   "repeater_cli": "CLI",
   "repeater_cliSubtitle": "Invia comandi al ripetitore",
@@ -995,7 +1013,7 @@
   "repeater_txPower": "TX Potenza",
   "repeater_txPowerHelper": "1-30 dBm",
   "repeater_bandwidth": "Larghezza di banda",
-  "repeater_spreadingFactor": "Spreading Factor",
+  "repeater_spreadingFactor": "Fattore di propagazione",
   "repeater_codingRate": "Tasso di Codifica",
   "repeater_locationSettings": "Impostazioni Luogo",
   "repeater_latitude": "Latitudine",
@@ -1058,6 +1076,81 @@
   },
   "repeater_confirm": "Conferma",
   "repeater_settingsSaved": "Impostazioni salvate con successo",
+  "repeater_rxGain": "Aumento del guadagno RX",
+  "repeater_rxGainHelper": "Maggiore sensibilità, maggiore assorbimento di corrente (solo per SX1262/SX1268)",
+  "repeater_refreshRxGain": "Rafforza l'effetto di RX",
+  "repeater_multiAcks": "ACK multipli",
+  "repeater_multiAcksSubtitle": "Riconoscere i messaggi attraverso percorsi multipli per una migliore consegna.",
+  "repeater_refreshMultiAcks": "Riaffermare più ACK",
+  "repeater_networkHealth": "Salute della rete",
+  "repeater_loopDetect": "Rilevamento di cicli",
+  "repeater_loopDetectHelper": "Crea pacchetti di dati che simulano loop di routing.",
+  "repeater_loopDetectOff": "Offerte",
+  "repeater_loopDetectMinimal": "Essenziale",
+  "repeater_loopDetectModerate": "Moderato",
+  "repeater_loopDetectStrict": "Rigido",
+  "repeater_dutyCycle": "Ciclo di lavoro",
+  "repeater_dutyCycleHelper": "Percentuale massima di utilizzo dello spazio pubblicitario",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Informazioni sull'operatore",
+  "repeater_ownerInfoHelper": "Metadati pubblici per questo ripetitore",
+  "repeater_refreshOwnerInfo": "Aggiorna le informazioni sull'operatore",
+  "repeater_floodMax": "Massimo numero di salti in caso di inondazione",
+  "repeater_floodMaxHelper": "Numero massimo di pacchetti che un flusso può attraversare (0-64)",
+  "repeater_advancedSettings": "Avanzato",
+  "repeater_advancedSettingsSubtitle": "Manopole di regolazione per operatori esperti",
+  "repeater_pathHashMode": "Modalità di hashing del percorso",
+  "repeater_pathHashModeHelper": "Byte utilizzati per codificare l'ID di questo ripetitore nei tag per il rilevamento del percorso/loop. 0=1 byte (256 ID, fino a 64 salti), 1=2 byte (65.000 ID, fino a 32 salti), 2=3 byte (16 milioni di ID, fino a 21 salti). Le versioni 1.13 e precedenti utilizzano percorsi multi-byte: è necessario attivare la rete prima di utilizzare questa funzionalità (a partire dalla versione 1.14).",
+  "repeater_txDelay": "Ritardo a Flood, TX",
+  "repeater_txDelayHelper": "Riassegnare lo spazio tra i pacchetti per gestire il traffico intenso, come un moltiplicatore del tempo di trasmissione (da 0 a 2, valore predefinito 0,5). Un valore più alto significa meno collisioni, ma una trasmissione più lenta.",
+  "repeater_directTxDelay": "Ritardo diretto TX",
+  "repeater_directTxDelayHelper": "Riassegnare lo spazio per il traffico diretto (non di massa), come un moltiplicatore del tempo di trasmissione del pacchetto (da 0 a 2, valore predefinito 0,3).",
+  "repeater_intThresh": "Soglia di interferenza",
+  "repeater_intThreshHelper": "Il limite è stato impostato per la calibrazione del livello di rumore del ricevitore, in modo che esso rifiuti i segnali di interferenza superiori a questo livello. 0 disabilita – aumentalo solo se si verificano errori nel ricevitore in una banda di frequenza rumorosa.",
+  "repeater_agcResetInterval": "Intervallo di ripristino di AGC",
+  "repeater_agcResetIntervalHelper": "Con quale frequenza è necessario resettare il controllo automatico del guadagno per ripristinare il funzionamento dopo un'interruzione. Impostare su secondi, ridotti a multipli di 4. Disattivare la reimpostazione periodica.",
+  "repeater_actionsTitle": "Azioni",
+  "repeater_sendAdvert": "Inviare annuncio relativo alle inondazioni",
+  "repeater_sendAdvertSubtitle": "Trasmettere un annuncio pubblicitario relativo alle inondazioni attraverso la rete.",
+  "repeater_sendAdvertZeroHop": "Inviare un annuncio senza intermediari",
+  "repeater_sendAdvertZeroHopSubtitle": "Trasmettere un annuncio a un solo hop (senza ripetitori)",
+  "repeater_clockSync": "Sincronizza l'orologio ora",
+  "repeater_clockSyncSubtitle": "Imposta l'ora del tuo telefono sul ripetitore.",
+  "repeater_actionSucceeded": "{action} ha avuto successo",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} failed: {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Impostazioni salvate — riavviare il ripetitore per applicare le modifiche",
+  "repeater_settingsPartialFailure": "Alcune impostazioni non sono state salvate: {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "Errore durante il salvataggio delle impostazioni: {error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1069,11 +1162,9 @@
   "repeater_refreshBasicSettings": "Aggiorna Impostazioni Base",
   "repeater_refreshRadioSettings": "Aggiorna le Impostazioni Radio",
   "repeater_refreshTxPower": "Aggiorna TX potenza",
-  "repeater_refreshLocationSettings": "Aggiorna le Impostazioni della Posizione",
   "repeater_refreshPacketForwarding": "Aggiorna il inoltro pacchetti",
   "repeater_refreshGuestAccess": "Aggiorna Accesso Ospite",
   "repeater_refreshPrivacyMode": "Aggiorna Modalità Privacy",
-  "repeater_refreshAdvertisementSettings": "Aggiorna le Impostazioni dell'Annuncio",
   "repeater_refreshed": "{label} aggiornato",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1191,6 +1282,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "Ingresso digitale",
+  "telemetry_digitalOutputLabel": "Uscita digitale",
+  "telemetry_analogInputLabel": "Ingresso analogico",
+  "telemetry_analogOutputLabel": "Uscita analogica",
+  "telemetry_genericLabel": "Sensore generico",
+  "telemetry_luminosityLabel": "Luminosità",
+  "telemetry_presenceLabel": "Presenza",
+  "telemetry_humidityLabel": "Umidità",
+  "telemetry_accelerometerLabel": "Accelerometro",
+  "telemetry_pressureLabel": "Pressione",
+  "telemetry_altitudeLabel": "Altitudine",
+  "telemetry_frequencyLabel": "Frequenza",
+  "telemetry_percentageLabel": "Percentuale",
+  "telemetry_concentrationLabel": "Concentrazione",
+  "telemetry_powerLabel": "Potenza",
+  "telemetry_distanceLabel": "Distanza",
+  "telemetry_energyLabel": "Energia",
+  "telemetry_directionLabel": "Direzione",
+  "telemetry_timeLabel": "Ora",
+  "telemetry_gyrometerLabel": "Giroscopio",
+  "telemetry_colourLabel": "Colore",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Interruttore",
+  "telemetry_polylineLabel": "Polilinea",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Numero di richieste",
+  "telemetry_error": "Impossibile recuperare i dati",
   "telemetry_noData": "Nessun dato di telemetria disponibile.",
   "telemetry_channelTitle": "Canale {channel}",
   "@telemetry_channelTitle": {
@@ -1346,7 +1474,7 @@
   "listFilter_sortBy": "Ordina per",
   "listFilter_latestMessages": "Ultimi messaggi",
   "listFilter_heardRecently": "Sentito di recente",
-  "listFilter_az": "A-Z",
+  "listFilter_az": "D-Z",
   "listFilter_filters": "Filtri",
   "listFilter_all": "Tutti",
   "listFilter_users": "Utenti",
@@ -1458,7 +1586,7 @@
       }
     }
   },
-  "common_ok": "OK",
+  "common_ok": "Va bene",
   "community_title": "Comunità",
   "community_create": "Crea Comunità",
   "community_createDesc": "Crea una nuova comunità e condividila tramite codice QR.",
@@ -1888,5 +2016,435 @@
   "tcpErrorTimedOut": "La connessione TCP è scaduta.",
   "tcpConnectionFailed": "Impossibile stabilire la connessione TCP: {error}",
   "map_showDiscoveryContacts": "Mostra Contatti di Discovery",
-  "map_setAsMyLocation": "Imposta come la mia posizione"
+  "map_setAsMyLocation": "Imposta come la mia posizione",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_privacySettingsDescription": "Scegli le informazioni che il tuo dispositivo condivide con gli altri.",
+  "settings_allowByContact": "Consenti in base ai flag di contatto",
+  "settings_telemetryLocationMode": "Modalità di posizionamento telemetrico",
+  "settings_telemetryEnvironmentMode": "Modalità di ambiente di telemetria",
+  "settings_advertLocation": "Posizione dell'annuncio",
+  "settings_advertLocationSubtitle": "Includi la posizione nell'annuncio",
+  "settings_privacy": "Impostazioni sulla privacy",
+  "settings_denyAll": "Negare tutto",
+  "settings_privacySubtitle": "Controlla le informazioni che vengono condivise.",
+  "settings_allowAll": "Consenti tutto",
+  "contact_info": "Informazioni di Contatto",
+  "settings_telemetryBaseMode": "Modalità di base di telemetria",
+  "contact_teleBase": "Base di telemetria",
+  "contact_teleLoc": "Posizione telemetria",
+  "contact_teleLocSubtitle": "Consenti la condivisione dei dati di posizione",
+  "contact_clearChat": "Cancella chat",
+  "contact_telemetry": "Telemetria",
+  "contact_settings": "Impostazioni di contatto",
+  "contact_lastSeen": "Ultimo accesso",
+  "contact_teleBaseSubtitle": "Consenti la condivisione del livello della batteria e della telemetria di base",
+  "contact_teleEnvSubtitle": "Consenti la condivisione dei dati del sensore ambientale",
+  "contact_teleEnv": "Ambiente di telemetria",
+  "appSettings_initialRouteWeight": "Peso iniziale del percorso",
+  "appSettings_initialRouteWeightSubtitle": "Peso di partenza per nuovi percorsi",
+  "appSettings_maxRouteWeightSubtitle": "Il peso massimo che un percorso può accumulare grazie a consegne di successo.",
+  "appSettings_maxRouteWeight": "Massimo peso consentito per il percorso",
+  "appSettings_routeWeightSuccessIncrement": "Aumento del peso del successo",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Peso aggiunto a un percorso dopo una consegna riuscita.",
+  "appSettings_routeWeightFailureDecrement": "Riduzione del peso associato al fallimento",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Peso rimosso da un percorso dopo un tentativo di consegna fallito.",
+  "appSettings_maxMessageRetries": "Numero massimo di tentativi di invio del messaggio",
+  "appSettings_maxMessageRetriesSubtitle": "Numero di tentativi di riprova prima di considerare un messaggio come fallito.",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Modalità telemetria aggiornata",
+  "settings_multiAck": "ACK multipli",
+  "map_showOverlaps": "Sovrapposizioni della chiave ripetitore",
+  "map_runTraceWithReturnPath": "Tornare indietro sullo stesso percorso",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "appSettings_jumpToOldestUnreadSubtitle": "Quando si apre una chat con messaggi non letti, scorrete verso l'alto fino al primo messaggio non letto, invece che al più recente.",
+  "chat_sendCooldown": "Si prega di attendere un momento prima di inviare nuovamente.",
+  "appSettings_jumpToOldestUnread": "Vai al messaggio più vecchio non letto",
+  "appSettings_languageHu": "Ungherese",
+  "appSettings_languageJa": "Giapponese",
+  "appSettings_languageKo": "Coreano",
+  "radioStats_tooltip": "Statistiche per radio e reti",
+  "radioStats_screenTitle": "Statistiche radio",
+  "radioStats_notConnected": "Connettiti a un dispositivo per visualizzare le statistiche radio.",
+  "radioStats_firmwareTooOld": "Le statistiche radio richiedono il firmware versione 8 o successiva.",
+  "radioStats_noiseFloor": "Livello di rumore: {noiseDbm} dBm",
+  "radioStats_waiting": "In attesa dei dati…",
+  "radioStats_lastRssi": "Ultimo valore RSSI: {rssiDbm} dBm",
+  "radioStats_lastSnr": "Ultimo SNR: {snr} dB",
+  "radioStats_txAir": "Tempo di trasmissione in diretta (totale): {seconds} s",
+  "radioStats_rxAir": "Tempo di trasmissione RX (totale): {seconds} s",
+  "radioStats_chartCaption": "Livello di rumore (dBm) misurato su campioni recenti.",
+  "radioStats_stripNoise": "Livello di rumore: {noiseDbm} dBm",
+  "radioStats_stripWaiting": "Recupero delle statistiche radio…",
+  "radioStats_settingsTile": "Statistiche radio",
+  "radioStats_settingsSubtitle": "Livello di rumore, RSSI, rapporto segnale/rumore (SNR) e tempo di trasmissione",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerTitle": "Tradurre prima di inviare",
+  "translation_enableSubtitle": "Tradurre i messaggi in arrivo e consentire la traduzione preventiva prima dell'invio.",
+  "translation_enableTitle": "Abilitare la traduzione",
+  "translation_title": "Traduzione",
+  "translation_composerSubtitle": "Controlla lo stato predefinito dell'icona di traduzione del compositore.",
+  "translation_autoIncomingTitle": "Traduci automaticamente i messaggi",
+  "translation_autoIncomingSubtitle": "Traduce automaticamente i messaggi per le notifiche e per le chat o i canali.",
+  "translation_translateMessage": "Traduci messaggio",
+  "translation_targetLanguage": "Lingua di destinazione",
+  "translation_useAppLanguage": "Utilizza la lingua dell'app",
+  "translation_downloadedModelLabel": "Modello scaricato",
+  "translation_presetModelLabel": "Modello predefinito di Hugging Face",
+  "translation_manualUrlLabel": "URL del modello manuale",
+  "translation_downloadModel": "Scarica il modello",
+  "translation_downloading": "Inizio download...",
+  "translation_working": "Lavoro...",
+  "translation_stop": "Smetta",
+  "translation_downloadedModels": "Modelli scaricati",
+  "translation_mergingChunks": "Unione dei frammenti scaricati in un unico file...",
+  "translation_deleteModel": "Elimina modello",
+  "translation_modelDownloaded": "Modello di traduzione scaricato.",
+  "translation_downloadStopped": "Il download è stato interrotto.",
+  "translation_downloadFailed": "Download fallito: {error}",
+  "translation_enterUrlFirst": "Inserite innanzitutto l'URL del modello.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_messageTranslation": "Traduzione del messaggio",
+  "translation_translateBeforeSending": "Tradurre prima di inviare",
+  "translation_composerDisabledHint": "Invia messaggi utilizzando la lingua originale, scritta.",
+  "translation_composerEnabledHint": "I messaggi verranno tradotti prima di essere inviati.",
+  "translation_translateTo": "Tradurre in {language}",
+  "translation_translationOptions": "Opzioni di traduzione",
+  "translation_systemLanguage": "Lingua del sistema",
+  "scanner_linuxPairingPinPrompt": "Inserire il codice PIN per {deviceName} (lasciare vuoto se non presente).",
+  "scanner_linuxPairingShowPin": "Mostra PIN",
+  "scanner_linuxPairingPinTitle": "PIN per l'accoppiamento Bluetooth",
+  "scanner_linuxPairingHidePin": "Nascondi il PIN",
+  "repeater_cliQuickClockSync": "Sincronizzazione dell'orologio",
+  "repeater_cliQuickDiscovery": "Scopri i Vicini",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLoginSubtitle": "Invia automaticamente il comando \"sincronizzazione dell'orologio\" dopo un login riuscito.",
+  "repeater_clockSyncAfterLogin": "Sincronizzazione dell'orologio dopo il login",
+  "repeater_guest": "Informazioni sul ripetitore",
+  "repeater_guestTools": "Strumenti per gli ospiti",
+  "chat_sendMessage": "Invia messaggio",
+  "room_guest": "Informazioni sul server",
+  "repeater_getCategory": "Ottenere valori",
+  "repeater_powerMgmt": "Gestione dell'energia",
+  "repeater_sensors": "Sensori",
+  "repeater_cliHelpPowerOff": "Disattiva il dispositivo. (non ci si aspetta alcuna risposta)",
+  "repeater_cliHelpClkReboot": "Riporta l'orologio a un'epoca nota e riavvia il dispositivo.",
+  "repeater_cliHelpAdvertZeroHop": "Invia un annuncio che raggiunge solo i vicini immediati (senza passaggi intermedi).",
+  "repeater_cliHelpStartOta": "Avvia un aggiornamento del firmware tramite la trasmissione radio su schede supportate.",
+  "repeater_cliHelpTime": "Imposta l'orario del dispositivo sui secondi dell'epoca Unix specificati. L'orario non può andare indietro.",
+  "repeater_cliHelpBoard": "Indica il produttore della scheda e l'identificatore hardware.",
+  "repeater_cliHelpDiscoverNeighbors": "Invia una richiesta di scoperta di nodi ai vicini. (Solo per ripetitori)",
+  "repeater_cliHelpPowersaving": "Indica se la modalità di risparmio energetico è attiva o disattivata.",
+  "repeater_cliHelpPowersavingOnOff": "Abilita o disabilita la modalità di risparmio energetico (se supportata).",
+  "repeater_cliHelpErase": "(Solo per sistemi di serializzazione) Formatta il file system del dispositivo. Elimina tutte le impostazioni e i contatti.",
+  "repeater_cliHelpSetDutyCycle": "Imposta il ciclo di trasmissione massimo consentito in percentuale (da 1 a 100). Regola internamente il fattore di tempo di trasmissione.",
+  "repeater_cliHelpSetPrvKey": "(Solo per serie) Sostituisce la chiave privata di identificazione del dispositivo. È necessario riavviare il dispositivo per applicare la modifica. Genera una nuova chiave pubblica.",
+  "repeater_cliHelpSetRadioRxGain": "(Solo per SX126x) Permette di attivare un guadagno RX potenziato per una maggiore sensibilità a correnti più elevate.",
+  "repeater_cliHelpSetOwnerInfo": "Definisce la stringa contenente le informazioni di contatto del proprietario, presente negli annunci. Utilizzare '|' per i newline.",
+  "repeater_cliHelpSetPathHashMode": "Imposta la modalità di hashing del percorso. 0 = modalità legacy, 1 = modalità standard, 2 = modalità rigorosa. Influisce su come vengono abbinati i percorsi di routing.",
+  "repeater_cliHelpSetLoopDetect": "Imposta il livello di sensibilità per il rilevamento dei loop di routing: disattivato, minimo, moderato o rigoroso.",
+  "repeater_cliHelpSetFreq": "(Solo per la funzione di regolazione della frequenza) Imposta rapidamente la frequenza desiderata. È necessario riavviare il dispositivo. Si consiglia di utilizzare la funzione \"imposta radio\" per impostare tutti i parametri radio.",
+  "repeater_cliHelpSetBridgeChannel": "(Solo per il bridge ESPNow) Imposta il canale Wi-Fi (da 1 a 14) utilizzato dal bridge.",
+  "repeater_cliHelpGetName": "Mostra il nome del nodo configurato.",
+  "repeater_cliHelpGetRole": "Indica il ruolo del firmware (ripetitore, server per stanza, ecc.).",
+  "repeater_cliHelpGetPublicKey": "Mostra la chiave pubblica del dispositivo.",
+  "repeater_cliHelpGetPrvKey": "(Solo per serie) Visualizza la chiave privata del dispositivo. Trattala come una informazione riservata.",
+  "repeater_cliHelpGetRepeat": "Indica se la funzione di inoltro dei pacchetti (funzione di ripetitore) è attiva o disattivata.",
+  "repeater_cliHelpGetTx": "Mostra la potenza attuale in dBm.",
+  "repeater_cliHelpGetFreq": "Mostra la frequenza radio configurata in MHz.",
+  "repeater_cliHelpGetRadio": "Visualizza tutti i parametri radio: frequenza, larghezza di banda, fattore di spreading, tasso di codifica.",
+  "repeater_cliHelpGetRadioRxGain": "(Solo per i moduli SX126x) Mostra lo stato del guadagno potenziato del RX.",
+  "repeater_cliHelpGetAf": "Mostra il fattore di trasmissione attuale.",
+  "repeater_cliHelpGetDutyCycle": "Mostra il ciclo di lavoro attuale consentito in percentuale.",
+  "repeater_cliHelpGetIntThresh": "Mostra il limite di interferenza del canale in dB.",
+  "repeater_cliHelpGetAgcResetInterval": "Indica l'intervallo di reset dell'AGC in secondi.",
+  "repeater_cliHelpGetMultiAcks": "Indica se la modalità \"ACK doppio\" è attiva (1) o disattivata (0).",
+  "repeater_cliHelpGetAllowReadOnly": "Indica se è consentito l'accesso in sola lettura per gli ospiti.",
+  "repeater_cliHelpGetAdvertInterval": "Indica l'intervallo pubblicitario locale in minuti.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Indica l'intervallo pubblicitario per la trasmissione del servizio di allerta alluvioni, espresso in ore.",
+  "repeater_cliHelpGetGuestPassword": "Visualizza la password del guest configurata.",
+  "repeater_cliHelpGetLat": "Mostra la latitudine configurata.",
+  "repeater_cliHelpGetLon": "Mostra la longitudine impostata.",
+  "repeater_cliHelpGetRxDelay": "Mostra il valore base di rxdelay.",
+  "repeater_cliHelpGetTxDelay": "Mostra il fattore di ritardo in modalità di allarme.",
+  "repeater_cliHelpGetDirectTxDelay": "Mostra il fattore di ritardo in modalità diretta.",
+  "repeater_cliHelpGetFloodMax": "Mostra il numero massimo di salti dovuto all'inondazione.",
+  "repeater_cliHelpGetOwnerInfo": "Visualizza la stringa contenente le informazioni di contatto del proprietario.",
+  "repeater_cliHelpGetPathHashMode": "Mostra la modalità \"hash del percorso\" (0/1/2).",
+  "repeater_cliHelpGetLoopDetect": "Indica la sensibilità alla rilevazione di loop.",
+  "repeater_cliHelpGetAcl": "(Solo per serie) Elenca le voci di controllo degli accessi su un ripetitore.",
+  "repeater_cliHelpGetBridgeEnabled": "Indica se il ponte è attivo.",
+  "repeater_cliHelpGetBridgeDelay": "Mostra il ritardo del ponte in millisecondi.",
+  "repeater_cliHelpGetBridgeSource": "Indica se il bridge sta inviando pacchetti RX o TX.",
+  "repeater_cliHelpGetBridgeBaud": "(Solo per l'adattatore RS232) Visualizza la velocità di trasmissione del bridge.",
+  "repeater_cliHelpGetBridgeChannel": "(Solo per il bridge ESPNow) Visualizza il canale WiFi del bridge.",
+  "repeater_cliHelpGetBridgeSecret": "(Solo per il bridge ESPNow) Visualizza la chiave segreta condivisa.",
+  "repeater_cliHelpGetBootloaderVer": "(Solo per NRF52) Visualizza la versione del bootloader.",
+  "repeater_cliHelpGetAdcMultiplier": "Mostra il moltiplicatore ADC (adattamento della tensione della batteria).",
+  "repeater_cliHelpGetPwrMgtSupport": "Indica se il sistema dispone di funzionalità di gestione dell'energia.",
+  "repeater_cliHelpGetPwrMgtSource": "Indica la fonte di alimentazione attuale: esterna o batteria.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Mostra le ragioni più recenti per il ripristino e lo spegnimento.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Mostra la tensione della batteria al momento dell'accensione, misurata in millivolt (mV).",
+  "repeater_cliHelpSensorGet": "Legge un valore di configurazione personalizzato per un sensore tramite un tasto.",
+  "repeater_cliHelpSensorSet": "Definisce una configurazione personalizzata per un sensore.",
+  "repeater_cliHelpSensorList": "Elenca tutte le impostazioni personalizzate dei sensori, organizzate in pagine a partire da un indice di inizio opzionale.",
+  "repeater_cliHelpRegionDefault": "Mostra l'ambito predefinito corrente.",
+  "repeater_cliHelpRegionDefaultSet": "Definisce l'ambito regionale predefinito. Utilizzare \"<null>\" per cancellare.",
+  "repeater_cliHelpRegionListAllowed": "Elenca le regioni che consentono il transito di veicoli in caso di allagamenti.",
+  "repeater_cliHelpRegionListDenied": "Elenca le regioni che vietano il transito in caso di alluvioni.",
+  "repeater_cliHelpStatsPackets": "(Solo per la visualizzazione dei dati seriali) Mostra statistiche a livello di pacchetto.",
+  "repeater_cliHelpStatsRadio": "(Solo per serie TV) Visualizza statistiche relative alla trasmissione radiofonica.",
+  "repeater_cliHelpStatsCore": "(Solo per serie) Visualizza le statistiche del firmware di base.",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "map_sharedAt": "Condiviso",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losSelectedObstructionTitle": "Ostacolo selezionato",
+  "losBlockedSpotsHint": "Tocca un punto bloccato sulla mappa per evidenziarlo.",
+  "losBlockedSpotsTitle": "Posti occupati",
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "losSelectedObstructionDetails": "Blocked by {obstruction} {heightUnit}, {distanceFromA} from A and {distanceFromB} from B ({distanceUnit}).",
+  "settings_companionDebugLogSubtitle": "Comandi, risposte e dati grezzi per protocolli BLE/TCP/USB",
+  "settings_companionDebugLog": "Registro di debug per il supporto",
+  "chat_newMessages": "Nuovi messaggi",
+  "chat_markAsUnread": "Segna come non letto",
+  "repeater_chanUtil": "Utilizzo del canale",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "common_undo": "Annulla",
+  "messageStatus_delivered": "Consegnato",
+  "messageStatus_sent": "Invia",
+  "messageStatus_pending": "Invio",
+  "messageStatus_failed": "Impossibile inviare",
+  "messageStatus_repeated": "Sentito ripetutamente",
+  "contacts_moreOptions": "Ulteriori opzioni",
+  "contacts_searchOpen": "Cerca contatti",
+  "contacts_searchClose": "Ricerca avanzata",
+  "routing_title": "Instradamento",
+  "routing_modeAuto": "Auto",
+  "routing_modeFlood": "Inondazione",
+  "routing_modeManual": "Manuale",
+  "routing_modeAutoHint": "Seleziona automaticamente il percorso più noto, e in caso di assenza di informazioni, utilizza un percorso casuale.",
+  "routing_modeFloodHint": "Trasmissioni tramite ogni ripetitore. Il metodo più affidabile, ma richiede più tempo di trasmissione.",
+  "routing_modeManualHint": "Invia sempre esattamente il percorso che hai definito.",
+  "routing_currentRoute": "Percorso attuale",
+  "routing_directNoHops": "Diretto — senza passaggi tramite ripetitori",
+  "routing_noPathYet": "Al momento non è stata individuata alcuna via. Il messaggio viene inviato ripetutamente finché non viene trovata una rotta.",
+  "routing_floodBroadcast": "Trasmissione attraverso ogni ripetitore",
+  "routing_editPath": "Percorso di modifica",
+  "routing_forgetPath": "Dimentica il percorso",
+  "routing_knownPaths": "Percorsi noti",
+  "routing_knownPathsHint": "Seleziona un percorso per accedere a questa opzione.",
+  "routing_inUse": "In uso",
+  "routing_qualityStrong": "Primo salto molto deciso",
+  "routing_qualityGood": "Primo tentativo di successo",
+  "routing_qualityFair": "Primo salto di qualità",
+  "routing_qualityWorked": "È stato consegnato",
+  "routing_qualityFlood": "Ho sentito tramite un messaggio urgente",
+  "routing_qualityUntested": "Non testato",
+  "routing_neverWorked": "mai confermato",
+  "routing_floodDelivery": "Consegna in caso di alluvione",
+  "pathEditor_title": "Creare percorso",
+  "pathEditor_hopCounter": "{count} tra 64 varietà di luppolo",
+  "pathEditor_noHops": "Al momento non ci sono ingredienti aggiuntivi. Per aggiungerli nell'ordine desiderato, cliccate sui ripetitori sottostanti. In alternativa, potete salvare la ricetta senza ingredienti aggiuntivi per inviarla direttamente.",
+  "pathEditor_addHops": "Aggiungere i luppoli nell'ordine desiderato.",
+  "pathEditor_searchRepeaters": "Ricerca ripetitori",
+  "pathEditor_advancedHex": "Avanzato: percorso esadecimale grezzo",
+  "pathEditor_hexLabel": "Prefissi esadecimali",
+  "pathEditor_hexHelper": "Due caratteri esadecimali per ogni salto, separati da virgole.",
+  "pathEditor_invalidTokens": "Non valido: {tokens}",
+  "routing_lastWorked": "worked {when}",
+  "pathEditor_tooManyHops": "Massimo 64 orari",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "pathEditor_usePath": "Utilizza questo percorso",
+  "pathEditor_removeHop": "Rimuovere il luppolo",
+  "pathEditor_unknownHop": "Ripetitore sconosciuto",
+  "map_zoomIn": "Ingrandisci",
+  "map_zoomOut": "Riduci la visualizzazione",
+  "map_centerMap": "Mappa del centro",
+  "channels_communityShortId": "ID: {id}...",
+  "chrome_bluetoothRequiresChromium": "Web Bluetooth richiede un browser basato su Chromium.",
+  "pathTrace_legendGpsConfirmed": "Il GPS conferma",
+  "pathTrace_legendInferred": "Posizione dedotta"
 }

lib/l10n/app_pt.arb

@@ -33,6 +33,8 @@
   "common_remove": "Remover",
   "common_enable": "Ativar",
   "common_disable": "Desativar",
+  "common_autoRefresh": "Atualização automática",
+  "common_interval": "Intervalo",
   "common_reboot": "Reiniciar",
   "common_loading": "Carregando...",
   "common_notAvailable": "—",
@@ -52,7 +54,7 @@
       }
     }
   },
-  "scanner_title": "MeshCore Open",
+  "scanner_title": "MeshCore: Versão aberta",
   "scanner_scanning": "Procurando por dispositivos...",
   "scanner_connecting": "Conectando...",
   "scanner_disconnecting": "Desconectando...",
@@ -104,6 +106,8 @@
   "settings_privacyModeEnabled": "Modo de privacidade ativado",
   "settings_privacyModeDisabled": "Modo de privacidade desativado",
   "settings_actions": "Ações",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "Enviar Publicidade",
   "settings_sendAdvertisementSubtitle": "Presença de transmissão agora",
   "settings_advertisementSent": "Anúncio enviado",
@@ -133,12 +137,12 @@
   "settings_aboutDescription": "Um cliente Flutter de código aberto para dispositivos de rede mesh LoRa Core da MeshCore.",
   "settings_infoName": "Nome",
   "settings_infoId": "ID",
-  "settings_infoStatus": "Status",
+  "settings_infoStatus": "Estado",
   "settings_infoBattery": "Bateria",
   "settings_infoPublicKey": "Chave Pública",
   "settings_infoContactsCount": "Número de Contatos",
   "settings_infoChannelCount": "Número do Canal",
-  "settings_presets": "Presets",
+  "settings_presets": "Configurações pré-definidas",
   "settings_frequency": "Frequência (MHz)",
   "settings_frequencyHelper": "300,0 - 2500,0",
   "settings_frequencyInvalid": "Frequência inválida (300-2500 MHz)",
@@ -164,19 +168,19 @@
   "appSettings_themeDark": "Escuro",
   "appSettings_language": "Idioma",
   "appSettings_languageSystem": "Padrão do sistema",
-  "appSettings_languageEn": "English",
-  "appSettings_languageFr": "Français",
-  "appSettings_languageEs": "Español",
-  "appSettings_languageDe": "Deutsch",
-  "appSettings_languagePl": "Polski",
-  "appSettings_languageSl": "Slovenščina",
+  "appSettings_languageEn": "Inglês",
+  "appSettings_languageFr": "Francês",
+  "appSettings_languageEs": "Espanhol",
+  "appSettings_languageDe": "Alemão",
+  "appSettings_languagePl": "Polonês",
+  "appSettings_languageSl": "Esloveno",
   "appSettings_languagePt": "Português",
   "appSettings_languageIt": "Italiano",
-  "appSettings_languageZh": "中文",
-  "appSettings_languageSv": "Svenska",
-  "appSettings_languageNl": "Nederlands",
-  "appSettings_languageSk": "Slovenčina",
-  "appSettings_languageBg": "Български",
+  "appSettings_languageZh": "Chinês",
+  "appSettings_languageSv": "Sueco",
+  "appSettings_languageNl": "Holandês",
+  "appSettings_languageSk": "Esloveno",
+  "appSettings_languageBg": "Búlgaro",
   "appSettings_notifications": "Notificações",
   "appSettings_enableNotifications": "Ativar Notificações",
   "appSettings_enableNotificationsSubtitle": "Receber notificações para mensagens e anúncios",
@@ -285,6 +289,7 @@
   "contacts_newGroup": "Novo Grupo",
   "contacts_groupName": "Nome do grupo",
   "contacts_groupNameRequired": "O nome do grupo é obrigatório.",
+  "contacts_groupNameReserved": "Este nome de grupo está reservado",
   "contacts_groupAlreadyExists": "O grupo \"{name}\" já existe",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -336,11 +341,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "Canal com hashtag",
   "channels_public": "Público",
   "channels_private": "Privado",
-  "channels_publicChannel": "Canal público",
-  "channels_privateChannel": "Canal privado",
   "channels_editChannel": "Editar canal",
   "channels_muteChannel": "Silenciar canal",
   "channels_unmuteChannel": "Ativar canal",
@@ -387,6 +389,22 @@
     }
   },
   "channels_smazCompression": "Compressão SMAZ",
+  "channels_cyr2latCompression": "Compressão Cyr2Lat",
+  "channels_cyr2latCompressionDscr": "Substitui alguns caracteres cirílicos por caracteres latinos ao enviar.",
+  "channels_cyr2latSettingsHeading": "Configuração do Cyr2Lat",
+  "channels_cyr2latSettingsSubheading": "Lista de substituições",
+  "channels_cyr2latSettingsDscr": "Editar a configuração JSON de substituição de caracteres",
+  "channels_cyr2latSettingsDialogHint": "Mapa de substituições JSON",
+  "channels_cyr2latSettingsDialogWrongJSON": "JSON incorreto: {error}",
+  "settings_cyr2latProfileAdd": "Adicionar perfil Cyr2Lat",
+  "settings_cyr2latProfileName": "Nome do perfil",
+  "settings_cyr2latProfileNameEmpty": "O nome do perfil não pode estar vazio",
+  "settings_cyr2latProfileAdded": "Perfil adicionado com sucesso",
+  "settings_cyr2latProfileUpdated": "Perfil atualizado com sucesso",
+  "settings_cyr2latProfileEdit": "Editar perfil Cyr2Lat",
+  "settings_cyr2latProfileDelete": "Eliminar perfil Cyr2Lat",
+  "settings_cyr2latProfileDeleted": "Perfil eliminado com sucesso",
+  "settings_cyr2latProfileDeleteDscr": "Tem a certeza de que deseja eliminar o perfil \"{name}\"?",
   "channels_channelUpdated": "Canal \"{name}\" atualizado",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -398,7 +416,7 @@
   "channels_publicChannelAdded": "Canal público adicionado",
   "channels_sortBy": "Ordenar por",
   "channels_sortManual": "Manual",
-  "channels_sortAZ": "A-Z",
+  "channels_sortAZ": "De A a Z",
   "channels_sortLatestMessages": "Últimas mensagens",
   "channels_sortUnread": "Não lido",
   "chat_noMessages": "Ainda não existem mensagens.",
@@ -503,7 +521,7 @@
       }
     }
   },
-  "debugFrame_timestamp": "- Timestamp: {timestamp}",
+  "debugFrame_timestamp": "- Carimbo: {timestamp}",
   "@debugFrame_timestamp": {
     "placeholders": {
       "timestamp": {
@@ -530,7 +548,7 @@
       }
     }
   },
-  "debugFrame_textTypeCli": "CLI",
+  "debugFrame_textTypeCli": "Interface de Linha de Comando",
   "debugFrame_textTypePlain": "Simples",
   "debugFrame_text": "- Texto: \"{text}\"",
   "@debugFrame_text": {
@@ -549,7 +567,7 @@
   "chat_pathHistoryFull": "O histórico está cheio. Remova entradas para adicionar novas.",
   "chat_hopSingular": "pule",
   "chat_hopPlural": "salta",
-  "chat_hopsCount": "{count} {count, plural, =1{hop} other{hops}}",
+  "chat_hopsCount": "{count} {count, plural, =1{salto} other{saltos}}",
   "@chat_hopsCount": {
     "placeholders": {
       "count": {
@@ -818,7 +836,7 @@
   "login_autoUseSavedPath": "Auto (usar caminho salvo)",
   "login_forceFloodMode": "Modo de Inundação Forçado",
   "login_managePaths": "Gerenciar Caminhos",
-  "login_login": "Login",
+  "login_login": "Entrar",
   "login_attempt": "Tentar {current}/{max}",
   "@login_attempt": {
     "placeholders": {
@@ -878,11 +896,11 @@
   "path_setPath": "Definir Caminho",
   "repeater_management": "Gerenciamento de Repetidor",
   "repeater_managementTools": "Ferramentas de Gerenciamento",
-  "repeater_status": "Status",
+  "repeater_status": "Estado",
   "repeater_statusSubtitle": "Visualizar status do repetidor, estatísticas e vizinhos.",
   "repeater_telemetry": "Telemetria",
   "repeater_telemetrySubtitle": "Visualizar telemetria de sensores e estatísticas do sistema",
-  "repeater_cli": "CLI",
+  "repeater_cli": "Interface de Linha de Comando",
   "repeater_cliSubtitle": "Enviar comandos ao repetidor",
   "repeater_settings": "Configurações",
   "repeater_settingsSubtitle": "Configurar parâmetros do repetidor",
@@ -992,7 +1010,7 @@
   "repeater_radioSettings": "Configurações de Rádio",
   "repeater_frequencyMhz": "Frequência (MHz)",
   "repeater_frequencyHelper": "300-2500 MHz",
-  "repeater_txPower": "TX Power",
+  "repeater_txPower": "Energia da TX",
   "repeater_txPowerHelper": "1-30 dBm",
   "repeater_bandwidth": "Largura de banda",
   "repeater_spreadingFactor": "Fator de Dispersão",
@@ -1058,6 +1076,81 @@
   },
   "repeater_confirm": "Confirmar",
   "repeater_settingsSaved": "Configurações salvas com sucesso",
+  "repeater_rxGain": "Aumento do ganho do RX",
+  "repeater_rxGainHelper": "Maior sensibilidade, maior consumo de corrente (apenas para SX1262/SX1268)",
+  "repeater_refreshRxGain": "Reforçar o ganho do RX",
+  "repeater_multiAcks": "Múltiplas respostas de confirmação",
+  "repeater_multiAcksSubtitle": "Reconheça mensagens através de múltiplos caminhos para uma melhor entrega.",
+  "repeater_refreshMultiAcks": "Reiniciar múltiplas confirmações",
+  "repeater_networkHealth": "Saúde da rede",
+  "repeater_loopDetect": "Detecção de loops",
+  "repeater_loopDetectHelper": "Envie pacotes que pareçam ser loops de roteamento.",
+  "repeater_loopDetectOff": "Desligado",
+  "repeater_loopDetectMinimal": "Mínimo",
+  "repeater_loopDetectModerate": "Moderado",
+  "repeater_loopDetectStrict": "Rígido",
+  "repeater_dutyCycle": "Ciclo de operação",
+  "repeater_dutyCycleHelper": "Porcentagem máxima de tempo de transmissão",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Informações sobre o operador",
+  "repeater_ownerInfoHelper": "Metadados públicos para este repetidor",
+  "repeater_refreshOwnerInfo": "Atualizar informações do operador",
+  "repeater_floodMax": "Número máximo de saltos em caso de inundação",
+  "repeater_floodMaxHelper": "Número máximo de saltos que um pacote de inundação pode percorrer (0-64)",
+  "repeater_advancedSettings": "Avançado",
+  "repeater_advancedSettingsSubtitle": "Controles de ajuste para operadores experientes",
+  "repeater_pathHashMode": "Modo de hash de caminho",
+  "repeater_pathHashModeHelper": "Bytes utilizados para codificar o ID deste repetidor nas tags de caminho/detecção de loop. 0=1 byte (256 IDs, até 64 saltos), 1=2 bytes (65.000 IDs, até 32 saltos), 2=3 bytes (16 milhões de IDs, até 21 saltos). As versões 1.13 e anteriores do firmware não suportam caminhos multi-byte — apenas funcionam uma vez após a ativação da rede (a partir da versão 1.14+).",
+  "repeater_txDelay": "Atraso na entrega em Flood, TX",
+  "repeater_txDelayHelper": "Ajuste de espaçamento para tráfego de inundações, como um multiplicador do tempo de transmissão (0-2, padrão 0,5). Quanto maior, menos colisões, mas uma entrega mais lenta.",
+  "repeater_directTxDelay": "Atraso direto no sinal TX",
+  "repeater_directTxDelayHelper": "Intervalo de retransmissão para tráfego direto (não em enxame), como um multiplicador do tempo de transmissão do pacote (0-2, padrão 0,3).",
+  "repeater_intThresh": "Limite de interferência",
+  "repeater_intThreshHelper": "O limite é definido para o nível de ruído do rádio, de modo que ele rejeite interferências acima desse nível. 0 desativa – aumente apenas se você observar erros de RX em uma faixa de frequência com ruído.",
+  "repeater_agcResetInterval": "Intervalo de reinicialização do AGC",
+  "repeater_agcResetIntervalHelper": "Com que frequência redefinir o controle automático de ganho do rádio para recuperar de um estado em que o ganho está travado. Segundos, reduzidos a um múltiplo de 4. 0 desativa as redefinições periódicas.",
+  "repeater_actionsTitle": "Ações",
+  "repeater_sendAdvert": "Envie anúncio sobre inundações",
+  "repeater_sendAdvertSubtitle": "Transmita um anúncio sobre inundações pela rede.",
+  "repeater_sendAdvertZeroHop": "Enviar anúncio sem intermediários",
+  "repeater_sendAdvertZeroHopSubtitle": "Transmita um anúncio de um único salto (sem repetição).",
+  "repeater_clockSync": "Sincronize o relógio agora",
+  "repeater_clockSyncSubtitle": "Envie a hora do seu telefone para o repetidor.",
+  "repeater_actionSucceeded": "{action} succeeded",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} failed: {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Configurações salvas — reinicie o repetidor para aplicar as alterações.",
+  "repeater_settingsPartialFailure": "Algumas configurações falharam: {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "Erro ao salvar as configurações: {error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1069,11 +1162,9 @@
   "repeater_refreshBasicSettings": "Atualizar Configurações Básicas",
   "repeater_refreshRadioSettings": "Atualizar Configurações de Rádio",
   "repeater_refreshTxPower": "Atualizar TX de energia",
-  "repeater_refreshLocationSettings": "Atualizar Configurações de Localização",
   "repeater_refreshPacketForwarding": "Atualizar Roteamento de Pacotes",
   "repeater_refreshGuestAccess": "Atualizar Acesso de Convidados",
   "repeater_refreshPrivacyMode": "Atualizar Modo Privacidade",
-  "repeater_refreshAdvertisementSettings": "Atualizar Configurações do Anúncio",
   "repeater_refreshed": "{label} atualizado",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1191,6 +1282,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "Entrada digital",
+  "telemetry_digitalOutputLabel": "Saída digital",
+  "telemetry_analogInputLabel": "Entrada analógica",
+  "telemetry_analogOutputLabel": "Saída analógica",
+  "telemetry_genericLabel": "Sensor genérico",
+  "telemetry_luminosityLabel": "Luminosidade",
+  "telemetry_presenceLabel": "Presença",
+  "telemetry_humidityLabel": "Humidade",
+  "telemetry_accelerometerLabel": "Acelerómetro",
+  "telemetry_pressureLabel": "Pressão",
+  "telemetry_altitudeLabel": "Altitude",
+  "telemetry_frequencyLabel": "Frequência",
+  "telemetry_percentageLabel": "Percentagem",
+  "telemetry_concentrationLabel": "Concentração",
+  "telemetry_powerLabel": "Potência",
+  "telemetry_distanceLabel": "Distância",
+  "telemetry_energyLabel": "Energia",
+  "telemetry_directionLabel": "Direção",
+  "telemetry_timeLabel": "Hora",
+  "telemetry_gyrometerLabel": "Girómetro",
+  "telemetry_colourLabel": "Cor",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Interruptor",
+  "telemetry_polylineLabel": "Polilinha",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Número de solicitações",
+  "telemetry_error": "Não foi possível obter os dados",
   "telemetry_noData": "Não estão disponíveis dados de telemetria.",
   "telemetry_channelTitle": "Canal {channel}",
   "@telemetry_channelTitle": {
@@ -1346,7 +1474,7 @@
   "listFilter_sortBy": "Ordenar por",
   "listFilter_latestMessages": "Últimas mensagens",
   "listFilter_heardRecently": "Ouvido recentemente",
-  "listFilter_az": "A-Z",
+  "listFilter_az": "De A a Z",
   "listFilter_filters": "Filtros",
   "listFilter_all": "Tudo",
   "listFilter_users": "Usuários",
@@ -1460,7 +1588,7 @@
   },
   "community_title": "Comunidade",
   "community_createDesc": "Crie uma nova comunidade e compartilhe via código QR.",
-  "common_ok": "OK",
+  "common_ok": "Tudo bem",
   "community_create": "Criar Comunidade",
   "community_join": "Junte-se",
   "community_joinTitle": "Junte-se à Comunidade",
@@ -1888,5 +2016,435 @@
   "tcpErrorTimedOut": "A conexão TCP expirou.",
   "tcpConnectionFailed": "Falha na conexão TCP: {error}",
   "map_showDiscoveryContacts": "Mostrar Contatos de Descoberta",
-  "map_setAsMyLocation": "Defina minha localização"
+  "map_setAsMyLocation": "Defina minha localização",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_privacySettingsDescription": "Escolha quais informações o seu dispositivo compartilha com os outros.",
+  "settings_allowByContact": "Permitir por bandeiras de contato",
+  "settings_telemetryLocationMode": "Modo de Localização de Telemetria",
+  "settings_telemetryEnvironmentMode": "Modo de Ambiente de Telemetria",
+  "settings_advertLocation": "Localização do Anúncio",
+  "settings_advertLocationSubtitle": "Incluir localização no anúncio",
+  "settings_privacySubtitle": "Controle o que é compartilhado.",
+  "settings_denyAll": "Negar todos",
+  "settings_allowAll": "Permitir todos",
+  "settings_privacy": "Configurações de Privacidade",
+  "contact_info": "Informações de Contato",
+  "settings_telemetryBaseMode": "Modo Base de Telemetria",
+  "contact_teleBase": "Base de Telemetria",
+  "contact_teleLoc": "Localização de Telemetria",
+  "contact_teleLocSubtitle": "Permitir compartilhamento de dados de localização",
+  "contact_teleEnv": "Ambiente de Telemetria",
+  "contact_teleEnvSubtitle": "Permitir compartilhamento de dados do sensor de ambiente",
+  "contact_lastSeen": "Visto pela última vez",
+  "contact_clearChat": "Limpar Chat",
+  "contact_telemetry": "Telemetria",
+  "contact_settings": "Configurações de Contato",
+  "contact_teleBaseSubtitle": "Permitir compartilhamento do nível da bateria e telemetria básica",
+  "appSettings_initialRouteWeight": "Peso Inicial da Rota",
+  "appSettings_maxRouteWeight": "Peso Máximo da Rota",
+  "appSettings_maxRouteWeightSubtitle": "Peso máximo que um determinado percurso pode acumular com entregas bem-sucedidas.",
+  "appSettings_initialRouteWeightSubtitle": "Peso inicial para novos caminhos descobertos",
+  "appSettings_routeWeightSuccessIncrement": "Aumento do peso para indicar sucesso",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Peso adicionado a um caminho após a entrega bem-sucedida.",
+  "appSettings_routeWeightFailureDecrement": "Redução do peso da falha",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Peso removido de um caminho após uma tentativa de entrega malsucedida.",
+  "appSettings_maxMessageRetries": "Número máximo de tentativas de envio de mensagens",
+  "appSettings_maxMessageRetriesSubtitle": "Número de tentativas de reenvio antes de classificar uma mensagem como falha.",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Modo de telemetria atualizado",
+  "settings_multiAck": "Multi-ACKs",
+  "map_showOverlaps": "Sobreposições da Chave Repeater",
+  "map_runTraceWithReturnPath": "Retornar ao mesmo caminho.",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "appSettings_jumpToOldestUnread": "Vá para a mensagem mais antiga não lida",
+  "chat_sendCooldown": "Por favor, aguarde um momento antes de reenviar.",
+  "appSettings_languageHu": "Húngaro",
+  "appSettings_jumpToOldestUnreadSubtitle": "Ao abrir uma conversa com mensagens não lidas, role para a primeira mensagem não lida, em vez da mais recente.",
+  "appSettings_languageJa": "Japonês",
+  "appSettings_languageKo": "Coreano",
+  "radioStats_tooltip": "Estatísticas de rádio e malha",
+  "radioStats_screenTitle": "Estatísticas de rádio",
+  "radioStats_notConnected": "Conecte-se a um dispositivo para visualizar estatísticas de rádio.",
+  "radioStats_firmwareTooOld": "As estatísticas de rádio exigem o firmware v8 ou uma versão mais recente.",
+  "radioStats_waiting": "Aguardando dados…",
+  "radioStats_noiseFloor": "Nível de ruído: {noiseDbm} dBm",
+  "radioStats_lastRssi": "Último RSSI: {rssiDbm} dBm",
+  "radioStats_lastSnr": "Último SNR: {snr} dB",
+  "radioStats_txAir": "Tempo de transmissão da TX (total): {seconds} s",
+  "radioStats_rxAir": "Tempo de uso do RX (total): {seconds} s",
+  "radioStats_chartCaption": "Nível de ruído (dBm) em amostras recentes.",
+  "radioStats_stripNoise": "Nível de ruído: {noiseDbm} dBm",
+  "radioStats_stripWaiting": "Obtendo estatísticas de rádio…",
+  "radioStats_settingsTile": "Estatísticas de rádio",
+  "radioStats_settingsSubtitle": "Nível de ruído, RSSI, SNR e tempo de transmissão",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerTitle": "Traduza antes de enviar",
+  "translation_enableSubtitle": "Traduzir mensagens recebidas e permitir a tradução antes do envio.",
+  "translation_enableTitle": "Ativar a tradução",
+  "translation_title": "Tradução",
+  "translation_composerSubtitle": "Controla o estado padrão do ícone de tradução do compositor.",
+  "translation_autoIncomingTitle": "Traduzir mensagens automaticamente",
+  "translation_autoIncomingSubtitle": "Traduz automaticamente mensagens para notificações e para chats ou canais.",
+  "translation_translateMessage": "Traduzir mensagem",
+  "translation_targetLanguage": "Língua-alvo",
+  "translation_useAppLanguage": "Utilize o idioma da aplicação",
+  "translation_downloadedModelLabel": "Modelo baixado",
+  "translation_presetModelLabel": "Modelo pré-definido da Hugging Face",
+  "translation_manualUrlLabel": "URL do modelo manual",
+  "translation_downloading": "Baixando...",
+  "translation_downloadModel": "Baixar modelo",
+  "translation_working": "Trabalhando...",
+  "translation_stop": "Pare",
+  "translation_mergingChunks": "Combinando os fragmentos baixados em um único arquivo...",
+  "translation_downloadedModels": "Modelos baixados",
+  "translation_deleteModel": "Excluir modelo",
+  "translation_modelDownloaded": "Modelo de tradução baixado.",
+  "translation_downloadStopped": "Download interrompido.",
+  "translation_downloadFailed": "Falha na descarga: {error}",
+  "translation_enterUrlFirst": "Insira primeiro a URL do modelo.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_messageTranslation": "Tradução da mensagem",
+  "translation_translateBeforeSending": "Traduzir antes de enviar",
+  "translation_composerEnabledHint": "As mensagens serão traduzidas antes de serem enviadas.",
+  "translation_composerDisabledHint": "Envie mensagens no idioma original, conforme digitado.",
+  "translation_translateTo": "Traduzir para {language}",
+  "translation_translationOptions": "Opções de tradução",
+  "translation_systemLanguage": "Idioma do sistema",
+  "scanner_linuxPairingShowPin": "Mostrar PIN",
+  "scanner_linuxPairingHidePin": "Ocultar PIN",
+  "scanner_linuxPairingPinPrompt": "Insira o PIN para {deviceName} (deixe em branco se não houver).",
+  "scanner_linuxPairingPinTitle": "PIN de emparelhamento Bluetooth",
+  "repeater_cliQuickClockSync": "Sincronização do Relógio",
+  "repeater_cliQuickDiscovery": "Descobrir Vizinhos",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLoginSubtitle": "Enviar automaticamente a sincronização do \"relógio\" após um login bem-sucedido.",
+  "repeater_clockSyncAfterLogin": "Sincronização do relógio após o login",
+  "room_guest": "Informações do Servidor",
+  "chat_sendMessage": "Enviar mensagem",
+  "repeater_guest": "Informações sobre repetidores",
+  "repeater_guestTools": "Ferramentas para hóspedes",
+  "repeater_getCategory": "Obter valores",
+  "repeater_powerMgmt": "Gerenciamento de energia",
+  "repeater_sensors": "Sensores",
+  "repeater_cliHelpPowerOff": "Desliga o dispositivo. (não se espera resposta)",
+  "repeater_cliHelpClkReboot": "Redefine o relógio para uma data conhecida e reinicia o dispositivo.",
+  "repeater_cliHelpAdvertZeroHop": "Envia um anúncio sem \"salto\" (apenas para vizinhos próximos).",
+  "repeater_cliHelpStartOta": "Inicia uma atualização de firmware via rádio em placas compatíveis.",
+  "repeater_cliHelpTime": "Define o relógio do dispositivo para os segundos da época Unix especificados. O relógio não pode retroceder.",
+  "repeater_cliHelpBoard": "Indica o fabricante da placa / identificador de hardware.",
+  "repeater_cliHelpDiscoverNeighbors": "Envia uma solicitação de descoberta de nós para os vizinhos próximos. (Apenas para repetidores)",
+  "repeater_cliHelpPowersaving": "Indica se o modo de economia de energia está ativado ou desativado.",
+  "repeater_cliHelpPowersavingOnOff": "Habilita ou desabilita o modo de economia de energia (quando disponível).",
+  "repeater_cliHelpErase": "(Apenas para dispositivos) Formata o sistema de arquivos do dispositivo. Apaga todas as configurações e contatos.",
+  "repeater_cliHelpSetDutyCycle": "Define o ciclo de transmissão máximo permitido como uma porcentagem (1-100). Ajusta internamente o fator de tempo de transmissão.",
+  "repeater_cliHelpSetPrvKey": "(Apenas para uso em série) Substitui a chave privada de identificação do dispositivo. É necessário reiniciar o dispositivo para aplicar a alteração. Gera uma nova chave pública.",
+  "repeater_cliHelpSetRadioRxGain": "(Apenas para SX126x) Alterna o ganho amplificado do receptor (RX) para melhorar a sensibilidade em condições de corrente mais elevada.",
+  "repeater_cliHelpSetOwnerInfo": "Define a string com as informações de contato do proprietário, que será incluída nos anúncios. Utilize '|' para indicar novas linhas.",
+  "repeater_cliHelpSetPathHashMode": "Define o modo de hash de caminho. 0 = modo legado, 1 = modo padrão, 2 = modo rigoroso. Afeta a forma como os caminhos de roteamento são correspondidos.",
+  "repeater_cliHelpSetLoopDetect": "Define o nível de sensibilidade para a detecção de loops de roteamento: desligado, mínimo, moderado ou estrito.",
+  "repeater_cliHelpSetFreq": "(Apenas para rádio) Define rapidamente a frequência. É necessário reiniciar o dispositivo. Recomenda-se usar a opção \"configurar rádio\" para definir todos os parâmetros do rádio.",
+  "repeater_cliHelpSetBridgeChannel": "(Apenas para a ponte ESPNow) Define o canal Wi-Fi (1-14) utilizado pela ponte.",
+  "repeater_cliHelpGetName": "Mostra o nome do nó configurado.",
+  "repeater_cliHelpGetRole": "Mostra o papel do firmware (Repetidor, Servidor de Sala, etc.).",
+  "repeater_cliHelpGetPublicKey": "Exibe a chave pública do dispositivo.",
+  "repeater_cliHelpGetPrvKey": "(Apenas para uso em série) Exibe a chave privada do dispositivo. Trate-a como uma informação confidencial.",
+  "repeater_cliHelpGetRepeat": "Indica se a função de encaminhamento de pacotes (função de repetidor) está ativada ou desativada.",
+  "repeater_cliHelpGetTx": "Mostra a potência atual em dBm.",
+  "repeater_cliHelpGetFreq": "Mostra a frequência de rádio configurada em MHz.",
+  "repeater_cliHelpGetRadio": "Exibe todos os parâmetros de rádio: frequência, largura de banda, fator de espalhamento, taxa de codificação.",
+  "repeater_cliHelpGetRadioRxGain": "(Apenas para SX126x) Mostra o estado do ganho amplificado do RX.",
+  "repeater_cliHelpGetAf": "Mostra o fator de tempo de transmissão atual.",
+  "repeater_cliHelpGetDutyCycle": "Mostra o ciclo de trabalho atual permitido em porcentagem.",
+  "repeater_cliHelpGetIntThresh": "Mostra o limite de interferência do canal em dB.",
+  "repeater_cliHelpGetAgcResetInterval": "Mostra o intervalo de reinicialização do AGC em segundos.",
+  "repeater_cliHelpGetMultiAcks": "Indica se o modo de confirmação dupla está ativado (1) ou desativado (0).",
+  "repeater_cliHelpGetAllowReadOnly": "Indica se o acesso somente de leitura para os convidados está habilitado.",
+  "repeater_cliHelpGetAdvertInterval": "Indica o intervalo de publicidade local em minutos.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Mostra o intervalo de tempo da publicidade relacionada às inundações, em horas.",
+  "repeater_cliHelpGetGuestPassword": "Mostra a senha de convidado configurada.",
+  "repeater_cliHelpGetLat": "Mostra a latitude configurada.",
+  "repeater_cliHelpGetLon": "Mostra a longitude configurada.",
+  "repeater_cliHelpGetRxDelay": "Mostra o valor base do atraso de resposta.",
+  "repeater_cliHelpGetTxDelay": "Mostra o fator de atraso em modo de inundação.",
+  "repeater_cliHelpGetDirectTxDelay": "Mostra o fator de atraso direto.",
+  "repeater_cliHelpGetFloodMax": "Mostra o número máximo de saltos devido às inundações.",
+  "repeater_cliHelpGetOwnerInfo": "Exibe a string de informações de contato do proprietário.",
+  "repeater_cliHelpGetPathHashMode": "Mostra o modo de hash de caminho (0/1/2).",
+  "repeater_cliHelpGetLoopDetect": "Demonstra a sensibilidade na detecção de loops.",
+  "repeater_cliHelpGetAcl": "(Apenas para séries) Lista as entradas de controle de acesso em um repetidor.",
+  "repeater_cliHelpGetBridgeEnabled": "Indica se a ponte está habilitada.",
+  "repeater_cliHelpGetBridgeDelay": "Mostra o atraso da ponte em milissegundos.",
+  "repeater_cliHelpGetBridgeSource": "Indica se a ponte está enviando ou recebendo pacotes RX ou TX.",
+  "repeater_cliHelpGetBridgeBaud": "(Apenas para ponte RS232) Exibe a taxa de baud da ponte.",
+  "repeater_cliHelpGetBridgeChannel": "(Apenas para a ponte ESPNow) Exibe o canal WiFi da ponte.",
+  "repeater_cliHelpGetBridgeSecret": "(Apenas para a ponte ESPNow) Exibe o segredo compartilhado pela ponte.",
+  "repeater_cliHelpGetBootloaderVer": "(Apenas para NRF52) Exibe a versão do bootloader.",
+  "repeater_cliHelpGetAdcMultiplier": "Mostra o multiplicador do ADC (escalonamento da tensão da bateria).",
+  "repeater_cliHelpGetPwrMgtSupport": "Indica se o sistema possui suporte para gerenciamento de energia.",
+  "repeater_cliHelpGetPwrMgtSource": "Indica a fonte de energia atual: externa ou bateria.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Mostra as razões mais recentes para a reinicialização e desligamento.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Mostra a tensão da bateria no momento da inicialização, em milivolts (mV).",
+  "repeater_cliHelpSensorGet": "Lê uma configuração de sensor personalizada através de uma chave.",
+  "repeater_cliHelpSensorSet": "Cria uma configuração personalizada para um sensor.",
+  "repeater_cliHelpSensorList": "Lista todas as configurações de sensores personalizadas, organizadas em páginas a partir de um índice de início opcional.",
+  "repeater_cliHelpRegionDefault": "Mostra o escopo de região padrão atual.",
+  "repeater_cliHelpRegionDefaultSet": "Define o escopo regional padrão. Use \"<null>\" para limpar.",
+  "repeater_cliHelpRegionListAllowed": "Lista as regiões que permitem o tráfego em áreas de risco de inundações.",
+  "repeater_cliHelpRegionListDenied": "Lista as regiões que restringem o tráfego em áreas de risco de inundações.",
+  "repeater_cliHelpStatsPackets": "(Apenas para séries) Apresenta estatísticas em nível de pacotes.",
+  "repeater_cliHelpStatsRadio": "(Apenas para transmissões em série) Exibe estatísticas de rádio.",
+  "repeater_cliHelpStatsCore": "(Apenas para dispositivos em série) Exibe estatísticas básicas do firmware.",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "map_sharedAt": "Compartilhado",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losBlockedSpotsTitle": "Locais ocupados",
+  "losBlockedSpotsHint": "Toque em um ponto bloqueado para destacá-lo no mapa.",
+  "losSelectedObstructionTitle": "Obstrução selecionada",
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "losSelectedObstructionDetails": "Blocked by {obstruction} {heightUnit}, {distanceFromA} from A and {distanceFromB} from B ({distanceUnit}).",
+  "settings_companionDebugLog": "Registro de depuração auxiliar",
+  "settings_companionDebugLogSubtitle": "Comandos, respostas e dados brutos para protocolos BLE/TCP/USB",
+  "chat_markAsUnread": "Marcar como não lido",
+  "chat_newMessages": "Novas mensagens",
+  "repeater_chanUtil": "Utilização do canal",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "common_undo": "Desfazer",
+  "messageStatus_sent": "Enviado",
+  "messageStatus_pending": "Enviar",
+  "messageStatus_delivered": "Entregue",
+  "messageStatus_failed": "Falhou ao enviar",
+  "messageStatus_repeated": "Ouvi repetidamente",
+  "contacts_moreOptions": "Mais opções",
+  "contacts_searchOpen": "Pesquisar contatos",
+  "contacts_searchClose": "Pesquisa avançada",
+  "routing_title": "Rotas",
+  "routing_modeAuto": "Carro",
+  "routing_modeFlood": "Inundação",
+  "routing_modeManual": "Manual",
+  "routing_modeAutoHint": "Seleciona automaticamente o caminho mais conhecido, e, se nenhum caminho conhecido for encontrado, utiliza a estratégia de \"inundação\".",
+  "routing_modeFloodHint": "Transmissão através de todos os repetidores. É a opção mais confiável, mas utiliza mais tempo de transmissão.",
+  "routing_modeManualHint": "Sempre segue exatamente o caminho que você define.",
+  "routing_currentRoute": "Rota atual",
+  "routing_directNoHops": "Direto – sem saltos de repetidor",
+  "routing_noPathYet": "Ainda não há um caminho definido. A mensagem continua a ser enviada até que uma rota seja encontrada.",
+  "routing_floodBroadcast": "Transmissão através de todos os repetidores",
+  "routing_editPath": "Editar caminho",
+  "routing_forgetPath": "Esqueça o caminho",
+  "routing_knownPaths": "Rotas conhecidas",
+  "routing_knownPathsHint": "Toque em um caminho para alternar para ele.",
+  "routing_inUse": "Em uso",
+  "routing_qualityStrong": "Primeiro salto notável",
+  "routing_qualityGood": "Primeiro salto bem-sucedido",
+  "routing_qualityFair": "Primeira etapa bem-sucedida",
+  "routing_qualityWorked": "Foi entregue",
+  "routing_qualityFlood": "Informação obtida através de relatos generalizados.",
+  "routing_qualityUntested": "Não testado",
+  "routing_neverWorked": "nunca confirmado",
+  "routing_floodDelivery": "Entrega em áreas afetadas por inundações",
+  "pathEditor_title": "Criar Caminho",
+  "pathEditor_hopCounter": "{count} de 64 gramas de lúpulo",
+  "pathEditor_noHops": "Ainda não há lúpulos adicionados. Clique nos repetidores abaixo para adicioná-los na ordem desejada, ou salve sem adicionar lúpulos para enviar diretamente.",
+  "pathEditor_addHops": "Adicione os lúpulos na seguinte ordem.",
+  "pathEditor_searchRepeaters": "Encontrar repetidores",
+  "pathEditor_advancedHex": "Avançado: caminho hexadecimal bruto",
+  "pathEditor_hexLabel": "Prefixos hexadecimais",
+  "pathEditor_hexHelper": "Dois caracteres hexadecimais por salto, separados por vírgulas.",
+  "pathEditor_invalidTokens": "Inválido: {tokens}",
+  "routing_lastWorked": "worked {when}",
+  "pathEditor_tooManyHops": "Máximo de 64 saltos",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "pathEditor_usePath": "Utilize este caminho.",
+  "pathEditor_removeHop": "Remova o lúpulo",
+  "pathEditor_unknownHop": "Repetidor desconhecido",
+  "map_zoomIn": "Ampliar",
+  "map_zoomOut": "Ampliar",
+  "map_centerMap": "Mapa do centro",
+  "chrome_bluetoothRequiresChromium": "O Web Bluetooth requer um navegador Chromium.",
+  "channels_communityShortId": "ID: {id}...",
+  "pathTrace_legendGpsConfirmed": "GPS confirmado",
+  "pathTrace_legendInferred": "Posição inferida"
 }

lib/l10n/app_ru.arb

@@ -39,6 +39,8 @@
   "common_notAvailable": "—",
   "common_voltageValue": "{volts} В",
   "common_percentValue": "{percent}%",
+  "common_autoRefresh": "Автообновление",
+  "common_interval": "Интервал",
   "scanner_title": "MeshCore Open",
   "scanner_scanning": "Поиск устройств...",
   "scanner_connecting": "Подключение...",
@@ -81,6 +83,8 @@
   "settings_privacyModeEnabled": "Режим конфиденциальности включен",
   "settings_privacyModeDisabled": "Режим конфиденциальности выключен",
   "settings_actions": "Действия",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "Отправить анонсирование",
   "settings_sendAdvertisementSubtitle": "Отправить анонсирование о присутствии сейчас",
   "settings_advertisementSent": "Анонсирование отправлено",
@@ -212,6 +216,7 @@
   "contacts_newGroup": "Новая группа",
   "contacts_groupName": "Имя группы",
   "contacts_groupNameRequired": "Имя группы обязательно",
+  "contacts_groupNameReserved": "Это имя группы зарезервировано",
   "contacts_groupAlreadyExists": "Группа \"{name}\" уже существует",
   "contacts_filterContacts": "Фильтр контактов...",
   "contacts_noContactsMatchFilter": "Нет контактов, соответствующих фильтру",
@@ -228,11 +233,8 @@
   "channels_searchChannels": "Поиск каналов...",
   "channels_noChannelsFound": "Каналы не найдены",
   "channels_channelIndex": "Канал {index}",
-  "channels_hashtagChannel": "Хэштег-канал",
   "channels_public": "Публичный",
   "channels_private": "Приватный",
-  "channels_publicChannel": "Публичный канал",
-  "channels_privateChannel": "Приватный канал",
   "channels_editChannel": "Изменить канал",
   "channels_muteChannel": "Отключить уведомления канала",
   "channels_unmuteChannel": "Включить уведомления канала",
@@ -251,6 +253,22 @@
   "channels_channelAdded": "Канал \"{name}\" добавлен",
   "channels_editChannelTitle": "Изменить канал {index}",
   "channels_smazCompression": "Сжатие SMAZ",
+  "channels_cyr2latCompression": "Сжатие Cyr2Lat",
+  "channels_cyr2latCompressionDscr": "Заменяет некоторые кириллические символы на латиницу при отправке.",
+  "channels_cyr2latSettingsHeading": "Настройка Cyr2Lat",
+  "channels_cyr2latSettingsSubheading": "Список замен",
+  "channels_cyr2latSettingsDscr": "Редактировать JSON-конфигурацию замены символов",
+  "channels_cyr2latSettingsDialogHint": "JSON-карта замен",
+  "channels_cyr2latSettingsDialogWrongJSON": "Некорректный JSON: {error}",
+  "settings_cyr2latProfileAdd": "Добавить профиль Cyr2Lat",
+  "settings_cyr2latProfileName": "Название профиля",
+  "settings_cyr2latProfileNameEmpty": "Название профиля не может быть пустым",
+  "settings_cyr2latProfileAdded": "Профиль добавлен",
+  "settings_cyr2latProfileUpdated": "Профиль успешно обновлен",
+  "settings_cyr2latProfileEdit": "Редактировать профиль Cyr2Lat",
+  "settings_cyr2latProfileDelete": "Удалить профиль Cyr2Lat",
+  "settings_cyr2latProfileDeleted": "Профиль успешно удален",
+  "settings_cyr2latProfileDeleteDscr": "Вы действительно хотите удалить профиль \"{name}\"?",
   "channels_channelUpdated": "Канал \"{name}\" обновлён",
   "channels_publicChannelAdded": "Публичный канал добавлен",
   "channels_sortBy": "Сортировка",
@@ -357,6 +375,8 @@
   "chat_direct": "Прямой",
   "chat_poiShared": "Точка интереса отправлена",
   "chat_unread": "Непрочитанных: {count}",
+  "chat_markAsUnread": "Пометить как непрочитанные",
+  "chat_newMessages": "Новые сообщения",
   "map_title": "Карта нод",
   "map_noNodesWithLocation": "Нет нод с данными о местоположении",
   "map_nodesNeedGps": "Ноды должны передавать свои GPS-координаты, чтобы отображаться на карте",
@@ -668,6 +688,43 @@
   "telemetry_voltageValue": "{volts}В",
   "telemetry_currentValue": "{amps}А",
   "telemetry_temperatureValue": "{celsius}°C / {fahrenheit}°F",
+  "telemetry_digitalInputLabel": "Цифровой вход",
+  "telemetry_digitalOutputLabel": "Цифровой выход",
+  "telemetry_analogInputLabel": "Аналоговый вход",
+  "telemetry_analogOutputLabel": "Аналоговый выход",
+  "telemetry_genericLabel": "Общий датчик",
+  "telemetry_luminosityLabel": "Освещённость",
+  "telemetry_presenceLabel": "Присутствие",
+  "telemetry_humidityLabel": "Влажность",
+  "telemetry_accelerometerLabel": "Акселерометр",
+  "telemetry_pressureLabel": "Давление",
+  "telemetry_altitudeLabel": "Высота",
+  "telemetry_frequencyLabel": "Частота",
+  "telemetry_percentageLabel": "Процент",
+  "telemetry_concentrationLabel": "Концентрация",
+  "telemetry_powerLabel": "Мощность",
+  "telemetry_distanceLabel": "Расстояние",
+  "telemetry_energyLabel": "Энергия",
+  "telemetry_directionLabel": "Направление",
+  "telemetry_timeLabel": "Время",
+  "telemetry_gyrometerLabel": "Гирометр",
+  "telemetry_colourLabel": "Цвет",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Переключатель",
+  "telemetry_polylineLabel": "Полилиния",
+  "telemetry_altitudeValue": "{meters} м",
+  "telemetry_frequencyValue": "{hertz} Гц",
+  "telemetry_pressureValue": "{hpa} гПа",
+  "telemetry_luminosityValue": "{lux} лк",
+  "telemetry_powerValue": "{watts} Вт",
+  "telemetry_distanceValue": "{meters} м",
+  "telemetry_energyValue": "{kilowattHours} кВт⋅ч",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Количество запросов",
+  "telemetry_error": "Не удалось получить данные",
   "neighbors_receivedData": "Полученные данные о соседях",
   "neighbors_requestTimedOut": "Время ожидания данных о соседях истекло.",
   "neighbors_errorLoading": "Ошибка загрузки соседей: {error}",
@@ -1128,5 +1185,569 @@
   "tcpErrorTimedOut": "Соединение TCP не удалось установить.",
   "tcpConnectionFailed": "Не удалось установить соединение TCP: {error}",
   "map_showDiscoveryContacts": "Показать контакты Discovery",
-  "map_setAsMyLocation": "Установить мое местоположение"
+  "map_setAsMyLocation": "Установить мое местоположение",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_privacy": "Настройки конфиденциальности",
+  "settings_privacySubtitle": "Контролируйте, какую информацию делиться.",
+  "settings_telemetryLocationMode": "Режим местоположения телеметрии",
+  "settings_telemetryEnvironmentMode": "Режим среды телеметрии",
+  "settings_advertLocation": "Местоположение рекламы",
+  "settings_advertLocationSubtitle": "Включить местоположение в объявление",
+  "settings_allowAll": "Разрешить все",
+  "settings_privacySettingsDescription": "Выберите, какую информацию ваше устройство будет делиться с другими.",
+  "settings_denyAll": "Отклонить все",
+  "settings_allowByContact": "Разрешить по флагам контактов",
+  "contact_info": "Контактная информация",
+  "settings_telemetryBaseMode": "Базовый режим телеметрии",
+  "contact_teleBase": "База телеметрии",
+  "contact_teleLoc": "Местоположение телеметрии",
+  "contact_teleLocSubtitle": "Разрешить обмен данными о местоположении",
+  "contact_teleEnv": "Среда телеметрии",
+  "contact_teleEnvSubtitle": "Разрешить обмен данными датчиков окружающей среды",
+  "contact_settings": "Настройки контактов",
+  "contact_telemetry": "Телеметрия",
+  "contact_clearChat": "Очистить чат",
+  "contact_lastSeen": "Последний раз видели",
+  "contact_teleBaseSubtitle": "Разрешить обмен уровнем заряда батареи и базовой телеметрией",
+  "appSettings_maxRouteWeight": "Максимальный допустимый вес маршрута",
+  "appSettings_maxRouteWeightSubtitle": "Максимальный вес, который может быть перевезён по определённому маршруту при успешных доставках.",
+  "appSettings_initialRouteWeightSubtitle": "Начальный вес для новых, только что открытых маршрутов",
+  "appSettings_initialRouteWeight": "Начальный вес маршрута",
+  "appSettings_routeWeightSuccessIncrement": "Увеличение веса успеха",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Вес, добавленный к маршруту после успешной доставки.",
+  "appSettings_routeWeightFailureDecrement": "Уменьшение веса неудачи",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Вес, который был удален с пути после неудачной доставки.",
+  "appSettings_maxMessageRetries": "Максимальное количество повторных попыток отправки сообщения",
+  "appSettings_maxMessageRetriesSubtitle": "Количество попыток повторной отправки сообщения перед тем, как пометить его как неудачное.",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Режим телеметрии обновлен",
+  "map_showOverlaps": "Перекрытия ключа повтора",
+  "map_runTraceWithReturnPath": "Вернуться обратно по тому же пути",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "chat_sendCooldown": "Пожалуйста, подождите немного, прежде чем отправлять сообщение снова.",
+  "appSettings_jumpToOldestUnread": "Перейти к самому старому непрочитанному сообщению",
+  "appSettings_languageHu": "Венгерский",
+  "appSettings_jumpToOldestUnreadSubtitle": "При открытии чата с непрочитанными сообщениями, прокрутите страницу, чтобы увидеть первое непрочитанное сообщение, а не последнее.",
+  "appSettings_languageJa": "Японский",
+  "appSettings_languageKo": "Корейский",
+  "radioStats_tooltip": "Статистика радио и беспроводной сети",
+  "radioStats_screenTitle": "Статистика радиовещания",
+  "radioStats_notConnected": "Подключитесь к устройству, чтобы просмотреть статистику радио.",
+  "radioStats_firmwareTooOld": "Для работы радиостатистики требуется установленная версия прошивки v8 или более новая.",
+  "radioStats_waiting": "Ожидаем данных…",
+  "radioStats_noiseFloor": "Уровень шума: {noiseDbm} дБм",
+  "radioStats_lastRssi": "Последнее значение RSSI: {rssiDbm} дБм",
+  "radioStats_lastSnr": "Последнее значение SNR: {snr} дБ",
+  "radioStats_txAir": "Время эфира на телеканале TX (общее): {seconds} секунд",
+  "radioStats_rxAir": "Общее время использования RX (в секундах): {seconds} с",
+  "radioStats_chartCaption": "Уровень шума (дБм) на основе последних измерений.",
+  "radioStats_stripNoise": "Уровень шума: {noiseDbm} дБм",
+  "radioStats_stripWaiting": "Получение данных о радио…",
+  "radioStats_settingsTile": "Статистика радиовещания",
+  "radioStats_settingsSubtitle": "Уровень шума, RSSI, SNR и время передачи",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_enableSubtitle": "Переводить входящие сообщения и позволять предварительный перевод перед отправкой.",
+  "translation_composerTitle": "Переводить перед отправкой",
+  "translation_title": "Перевод",
+  "translation_enableTitle": "Включить перевод",
+  "translation_composerSubtitle": "Управляет исходным состоянием значка перевода, предоставляемого редактором.",
+  "translation_autoIncomingTitle": "Автоматически переводить сообщения",
+  "translation_autoIncomingSubtitle": "Автоматически переводит сообщения для уведомлений, а также для чатов и каналов.",
+  "translation_translateMessage": "Перевести сообщение",
+  "translation_targetLanguage": "Целевой язык",
+  "translation_useAppLanguage": "Используйте язык приложения",
+  "translation_downloadedModelLabel": "Загруженная модель",
+  "translation_presetModelLabel": "Предопределенная модель от Hugging Face",
+  "translation_manualUrlLabel": "Ссылка на руководство",
+  "translation_downloadModel": "Скачать модель",
+  "translation_downloading": "Загрузка...",
+  "translation_stop": "Прекратите",
+  "translation_working": "Работа...",
+  "translation_mergingChunks": "Объединение скачанных фрагментов в один финальный файл...",
+  "translation_downloadedModels": "Загруженные модели",
+  "translation_deleteModel": "Удалить модель",
+  "translation_modelDownloaded": "Модель перевода загружена.",
+  "translation_downloadStopped": "Процесс загрузки был прерван.",
+  "translation_downloadFailed": "Не удалось скачать: {error}",
+  "translation_enterUrlFirst": "Сначала введите URL модели.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_translateBeforeSending": "Перевести перед отправкой",
+  "translation_composerEnabledHint": "Сообщения будут переведены перед отправкой.",
+  "translation_messageTranslation": "Перевод сообщения",
+  "translation_composerDisabledHint": "Отправляйте сообщения на языке, в котором они были изначально набраны.",
+  "translation_translateTo": "Перевести на {language}",
+  "translation_translationOptions": "Варианты перевода",
+  "translation_systemLanguage": "Язык системы",
+  "scanner_linuxPairingShowPin": "Показать PIN",
+  "scanner_linuxPairingPinPrompt": "Введите PIN‑код для {deviceName} (оставьте пустым, если нет).",
+  "scanner_linuxPairingHidePin": "Скрыть PIN",
+  "scanner_linuxPairingPinTitle": "PIN‑код сопряжения Bluetooth",
+  "repeater_cliQuickDiscovery": "Обнаружить Соседей",
+  "repeater_cliQuickClockSync": "Синхронизация часов",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLogin": "Синхронизация часов после входа в систему",
+  "repeater_clockSyncAfterLoginSubtitle": "Автоматически отправлять сообщение \"синхронизация времени\" после успешной авторизации.",
+  "chat_sendMessage": "Отправить сообщение",
+  "repeater_guest": "Информация о ретрансляторе",
+  "room_guest": "Информация о сервере",
+  "repeater_guestTools": "Инструменты для гостей",
+  "common_done": "Готово",
+  "background_serviceTitle": "MeshCore работает",
+  "background_serviceText": "Поддерживает BLE-соединение",
+  "appSettings_translationModelDeleted": "Удалено {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Не удалось удалить: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Не удалось обновить канал: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Тип",
+  "map_path": "Путь",
+  "map_location": "Местоположение",
+  "map_estLocation": "Прибл. местоположение",
+  "map_publicKey": "Публичный ключ",
+  "map_publicKeyPrefixHint": "напр. ab12",
+  "contact_typeChat": "Чат",
+  "contact_typeRepeater": "Ретранслятор",
+  "contact_typeRoom": "Комната",
+  "contact_typeSensor": "Датчик",
+  "contact_typeUnknown": "Неизвестно",
+  "channels_via": "через {path}",
+  "chat_score": "Оценка",
+  "settings_multiAck": "Несколько подтверждений",
+  "map_sharedAt": "Поделено",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losBlockedSpotsHint": "Щелкните по заблокированной области, чтобы выделить ее на карте.",
+  "losBlockedSpotsTitle": "Зарезервированные места",
+  "losSelectedObstructionTitle": "Выбранный объект, препятствующий движению",
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "losSelectedObstructionDetails": "Blocked by {obstruction} {heightUnit}, {distanceFromA} from A and {distanceFromB} from B ({distanceUnit}).",
+  "repeater_rxGain": "Увеличенная эффективность RX",
+  "repeater_rxGainHelper": "Более высокая чувствительность, больший ток потребления (только для SX1262/SX1268)",
+  "repeater_refreshRxGain": "Обновите усиление RX",
+  "repeater_multiAcks": "Несколько подтверждений",
+  "repeater_multiAcksSubtitle": "Обеспечьте доставку сообщений по нескольким каналам для повышения эффективности.",
+  "repeater_refreshMultiAcks": "Обновление нескольких подтверждений",
+  "repeater_networkHealth": "Состояние сети",
+  "repeater_loopDetect": "Обнаружение циклов",
+  "repeater_loopDetectHelper": "Создайте пакеты данных, которые выглядят как циклы маршрутизации.",
+  "repeater_loopDetectOff": "Отключено",
+  "repeater_loopDetectMinimal": "Минимальный",
+  "repeater_loopDetectModerate": "Умеренный",
+  "repeater_loopDetectStrict": "Строгий",
+  "repeater_dutyCycle": "Цикл работы",
+  "repeater_dutyCycleHelper": "Максимальный процент времени, выделенного на трансляцию.",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Информация о операторе",
+  "repeater_ownerInfoHelper": "Общая метаинформация для этого ретранслятора",
+  "repeater_refreshOwnerInfo": "Обновить информацию о операторе",
+  "repeater_floodMax": "Максимальное количество прыжков при наводнении",
+  "repeater_floodMaxHelper": "Максимальное количество пакетов, которые могут быть отправлены в одном потоке (0-64)",
+  "repeater_advancedSettings": "Продвинутый",
+  "repeater_advancedSettingsSubtitle": "Регуляторы для опытных операторов",
+  "repeater_pathHashMode": "Режим хеширования пути",
+  "repeater_pathHashModeHelper": "Байты, используемые для кодирования идентификатора этого ретранслятора в тегах для обнаружения потоков/циклов. 0 = 1 байт (256 идентификаторов, до 64 переходов), 1 = 2 байта (65 000 идентификаторов, до 32 переходов), 2 = 3 байта (1 600 000 идентификаторов, до 21 перехода). Версии прошивки v1.13 и более ранние версии не поддерживают многобайтовые пути — они поднимаются только после того, как ваша сеть будет обновлена до версии v1.14 и выше.",
+  "repeater_txDelay": "Задержка в работе системы Flood TX",
+  "repeater_txDelayHelper": "Передача с увеличенным интервалом для трафика во время наводнения, в качестве коэффициента, умножающего время передачи пакета (от 0 до 2, по умолчанию 0,5). Более высокое значение означает меньшее количество столкновений, но более медленную передачу.",
+  "repeater_directTxDelay": "Прямая задержка сигнала TX",
+  "repeater_directTxDelayHelper": "Передача промежуточных данных для прямого (немассового) трафика, в качестве коэффициента, равного времени передачи пакета (от 0 до 2, по умолчанию 0,3).",
+  "repeater_intThresh": "Пороговое значение помех",
+  "repeater_intThreshHelper": "Порог устанавливается для калибровки уровня шума радио, чтобы оно отсеивало помехи, превышающие этот уровень. Значение \"0\" означает отключение – используйте только в случае, если вы наблюдаете ошибки при приеме сигнала в шумном диапазоне.",
+  "repeater_agcResetInterval": "Интервал сброса AGC",
+  "repeater_agcResetIntervalHelper": "Как часто следует сбрасывать автоматическую регулировку усиления радио, чтобы вернуться к нормальному состоянию после заклинивания? Интервал сброса составляет несколько секунд, кратный 4. Отключение периодического сброса осуществляется с помощью параметра 0.",
+  "repeater_actionsTitle": "Действия",
+  "repeater_sendAdvert": "Отправить объявление о наводнении",
+  "repeater_sendAdvertSubtitle": "Разместите рекламу о наводнении в эфире по всей сети.",
+  "repeater_sendAdvertZeroHop": "Опубликуйте рекламу, не требующую промежуточного распространения.",
+  "repeater_sendAdvertZeroHopSubtitle": "Разместите рекламу, распространяемую одним способом (без использования ретрансляторов).",
+  "repeater_clockSync": "Синхронизировать время сейчас",
+  "repeater_clockSyncSubtitle": "Установите время на вашем телефоне, чтобы оно совпадало со временем ретранслятора.",
+  "repeater_actionSucceeded": "{action} succeeded",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} failed: {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Настройки сохранены — перезагрузите ретранслятор, чтобы применить их.",
+  "repeater_settingsPartialFailure": "Некоторые настройки не удалось применить: {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
+  "@settings_multiAck": {
+    "placeholders": {
+      "value": {
+        "type": "String"
+      }
+    }
+  },
+  "@common_percentValue": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "@settings_aboutVersion": {
+    "placeholders": {
+      "version": {
+        "type": "String"
+      }
+    }
+  },
+  "@telemetry_temperatureValue": {
+    "placeholders": {
+      "celsius": {
+        "type": "String"
+      },
+      "fahrenheit": {
+        "type": "String"
+      }
+    }
+  },
+  "@channelPath_timeWithDate": {
+    "placeholders": {
+      "day": {
+        "type": "int"
+      },
+      "month": {
+        "type": "int"
+      },
+      "time": {
+        "type": "String"
+      }
+    }
+  },
+  "@channelPath_timeOnly": {
+    "placeholders": {
+      "time": {
+        "type": "String"
+      }
+    }
+  },
+  "@channelPath_selectedPathLabel": {
+    "placeholders": {
+      "label": {
+        "type": "String"
+      },
+      "prefixes": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_getCategory": "Получить значения",
+  "repeater_powerMgmt": "Управление энергопотреблением",
+  "repeater_sensors": "Датчики",
+  "repeater_cliHelpPowerOff": "Отключает устройство. (ожидается отсутствие ответа).",
+  "repeater_cliHelpClkReboot": "Сбрасывает часы до известной эпохи и перезапускает устройство.",
+  "repeater_cliHelpAdvertZeroHop": "Отправляет рекламу, распространяемую только среди ближайших соседей (без промежуточных узлов).",
+  "repeater_cliHelpStartOta": "Запускает обновление прошивки по воздуху на поддерживаемых устройствах.",
+  "repeater_cliHelpTime": "Устанавливает время устройства в соответствии с заданными секундами от начала эпохи Unix. Время не может сброситься назад.",
+  "repeater_cliHelpBoard": "Отображает информацию о производителе платы / идентификатор аппаратного обеспечения.",
+  "repeater_cliHelpDiscoverNeighbors": "Отправляет запрос на обнаружение соседних узлов. (Только для ретранслятора)",
+  "repeater_cliHelpPowersavingOnOff": "Включает или выключает режим экономии энергии (если он поддерживается).",
+  "repeater_cliHelpPowersaving": "Показывает, включен ли режим экономии энергии.",
+  "repeater_cliHelpErase": "(Только для серийного использования) Форматирует файловую систему устройства. Удаляет все настройки и контакты.",
+  "repeater_cliHelpSetDutyCycle": "Устанавливает максимальный допустимый цикл передачи данных в процентах (от 1 до 100). Внутренне корректирует коэффициент времени передачи.",
+  "repeater_cliHelpSetPrvKey": "(Только для серийного использования) Заменяет приватный ключ, идентифицирующий устройство. Требуется перезагрузка для применения. Генерирует новый публичный ключ.",
+  "repeater_cliHelpSetRadioRxGain": "(Только для SX126x) Переключает усиление RX для повышения чувствительности при больших токах потребления.",
+  "repeater_cliHelpSetOwnerInfo": "Указывает строку с контактной информацией владельца, которая должна быть включена в объявления. Используйте '|' для переносов строк.",
+  "repeater_cliHelpSetPathHashMode": "Устанавливает режим хеширования пути. 0 = устаревший, 1 = стандартный, 2 = строгий. Влияет на то, как определяются маршруты.",
+  "repeater_cliHelpSetLoopDetect": "Устанавливает чувствительность обнаружения циклов маршрутизации: \"выключено\", \"минимальная\", \"умеренная\" или \"строгая\".",
+  "repeater_cliHelpSetFreq": "(Только для настройки) Быстро устанавливает только частоту. Требуется перезагрузка. Рекомендуется использовать функцию \"настройка радио\" для полного набора параметров.",
+  "repeater_cliHelpSetBridgeChannel": "(Только для моста ESPNow) Устанавливает канал Wi-Fi (от 1 до 14), используемый мостом.",
+  "repeater_cliHelpGetName": "Отображает имя настроенного узла.",
+  "repeater_cliHelpGetRole": "Отображает роль прошивки (ретранслятор, сервер для комнаты и т.д.).",
+  "repeater_cliHelpGetPublicKey": "Отображает открытый ключ устройства.",
+  "repeater_cliHelpGetPrvKey": "(Только для серийного использования) Отображает приватный ключ устройства. Рассматривайте его как секретную информацию.",
+  "repeater_cliHelpGetRepeat": "Отображает, включена ли функция перенаправления пакетов (функция ретранслятора) или нет.",
+  "repeater_cliHelpGetTx": "Отображает текущую мощность передатчика в дБм.",
+  "repeater_cliHelpGetFreq": "Отображает настроенную частоту радиосигнала в мегагерцах.",
+  "repeater_cliHelpGetRadio": "Отображает все параметры радиосигнала: частоту, полосу пропускания, коэффициент модуляции, скорость кодирования.",
+  "repeater_cliHelpGetRadioRxGain": "(Только для SX126x) Отображает состояние усиления сигнала на входе RX.",
+  "repeater_cliHelpGetAf": "Отображает текущий коэффициент времени эфира.",
+  "repeater_cliHelpGetDutyCycle": "Отображает текущий допустимый цикл работы в процентах.",
+  "repeater_cliHelpGetIntThresh": "Отображает порог помех в децибелах.",
+  "repeater_cliHelpGetAgcResetInterval": "Отображает интервал сброса автоматической регулировки усиления в секундах.",
+  "repeater_cliHelpGetMultiAcks": "Показывает, включен ли режим двойной подтверждения (1) или выключен (0).",
+  "repeater_cliHelpGetAllowReadOnly": "Отображает, разрешен ли доступ для чтения только для гостей.",
+  "repeater_cliHelpGetAdvertInterval": "Отображает продолжительность рекламного блока в минутах.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Отображает интервал времени показа рекламного ролика в часах.",
+  "repeater_cliHelpGetGuestPassword": "Отображает установленный пароль для гостя.",
+  "repeater_cliHelpGetLat": "Отображает заданную широту.",
+  "repeater_cliHelpGetLon": "Отображает заданную долготу.",
+  "repeater_cliHelpGetRxDelay": "Отображает базовое значение задержки.",
+  "repeater_cliHelpGetTxDelay": "Отображает коэффициент задержки при работе в режиме затопления.",
+  "repeater_cliHelpGetDirectTxDelay": "Отображает коэффициент задержки в режиме прямого подключения.",
+  "repeater_cliHelpGetFloodMax": "Отображает максимальное количество переходов при затоплении.",
+  "repeater_cliHelpGetOwnerInfo": "Отображает строку с контактной информацией владельца.",
+  "repeater_cliHelpGetPathHashMode": "Отображает режим работы с хэшем пути (0/1/2).",
+  "repeater_cliHelpGetLoopDetect": "Отображает чувствительность к обнаружению циклов.",
+  "repeater_cliHelpGetAcl": "(Только для серий) Перечисляет записи управления доступом на ретрансляторе.",
+  "repeater_cliHelpGetBridgeEnabled": "Показывает, включена ли функция моста.",
+  "repeater_cliHelpGetBridgeDelay": "Отображает задержку в миллисекундах.",
+  "repeater_cliHelpGetBridgeSource": "Отображает, какие пакеты RX или TX передаются через мост.",
+  "repeater_cliHelpGetBridgeBaud": "(Только для интерфейса RS232) Отображает скорость передачи данных на интерфейсе RS232.",
+  "repeater_cliHelpGetBridgeChannel": "(Только для моста ESPNow) Отображает канал WiFi, используемый мостом.",
+  "repeater_cliHelpGetBridgeSecret": "(Только для моста ESPNow) Отображает общий секрет, используемый мостом.",
+  "repeater_cliHelpGetBootloaderVer": "(Только для NRF52) Отображает версию загрузчика.",
+  "repeater_cliHelpGetAdcMultiplier": "Отображает коэффициент умножения аналого-цифрового преобразователя (масштабирование напряжения от батареи).",
+  "repeater_cliHelpGetPwrMgtSupport": "Сообщает, есть ли у совета поддержки функций управления питанием.",
+  "repeater_cliHelpGetPwrMgtSource": "Отображает текущий источник питания: внешний или аккумулятор.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Отображает последние причины сброса и выключения.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Отображает напряжение батареи при запуске системы в милливольтах (мВ).",
+  "repeater_cliHelpSensorGet": "Считывает пользовательское значение для датчика по указанному ключу.",
+  "repeater_cliHelpSensorSet": "Создает пользовательские настройки для датчика.",
+  "repeater_cliHelpSensorList": "Перечисляет все пользовательские настройки датчиков, разбитые на страницы с возможностью указания начального индекса.",
+  "repeater_cliHelpRegionDefault": "Отображает текущий область действия по умолчанию.",
+  "repeater_cliHelpRegionDefaultSet": "Устанавливает значение региона по умолчанию. Используйте \"<null>\", чтобы сбросить значение.",
+  "repeater_cliHelpRegionListAllowed": "Перечисляет регионы, где разрешено движение транспорта во время наводнений.",
+  "repeater_cliHelpRegionListDenied": "Перечисляет регионы, где запрещено движение транспорта во время наводнений.",
+  "repeater_cliHelpStatsPackets": "(Только для серийной версии) Отображает статистику на уровне пакетов.",
+  "repeater_cliHelpStatsRadio": "(Только для серий) Отображает статистику радио.",
+  "repeater_cliHelpStatsCore": "(Только для серийного оборудования) Отображает основные статистические данные прошивки.",
+  "settings_companionDebugLogSubtitle": "Команды, ответы и необработанные данные, используемые для протоколов BLE, TCP и USB.",
+  "repeater_chanUtil": "Использование канала",
+  "settings_companionDebugLog": "Журнал отладки (для сопутствующего приложения)",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "messageStatus_pending": "Отправка",
+  "common_undo": "Отменить",
+  "messageStatus_delivered": "Доставлено",
+  "messageStatus_sent": "Отправлено",
+  "messageStatus_failed": "Не удалось отправить",
+  "messageStatus_repeated": "Услышал несколько раз",
+  "contacts_moreOptions": "Больше вариантов",
+  "contacts_searchOpen": "Найти контакты",
+  "contacts_searchClose": "Закрыть поиск",
+  "routing_title": "Маршрутизация",
+  "routing_modeAuto": "Авто",
+  "routing_modeFlood": "Наводнение",
+  "routing_modeManual": "Инструкция",
+  "routing_modeAutoHint": "Автоматически выбирает наиболее известный путь, и если такой путь неизвестен, использует алгоритм поиска пути.",
+  "routing_modeFloodHint": "Передача сигнала через все ретрансляторы. Самый надежный способ, но требует больше времени на передачу.",
+  "routing_modeManualHint": "Всегда следует точно по указанному вами маршруту.",
+  "routing_currentRoute": "Текущий маршрут",
+  "routing_directNoHops": "Прямое соединение – без использования ретрансляторов",
+  "routing_noPathYet": "Пока нет пути. Следующее сообщение будет отправлено до тех пор, пока не будет обнаружен маршрут.",
+  "routing_floodBroadcast": "Транслируется через все ретрансляторы",
+  "routing_editPath": "Изменить путь",
+  "routing_forgetPath": "Забудьте о маршруте",
+  "routing_knownPaths": "Известные маршруты",
+  "routing_knownPathsHint": "Создайте маршрут для переключения на этот пункт.",
+  "routing_inUse": "В эксплуатации",
+  "routing_qualityStrong": "Сильный первый скачок",
+  "routing_qualityGood": "Хорошее начало",
+  "routing_qualityFair": "Первый хороший урожай",
+  "routing_qualityWorked": "Осуществлено",
+  "routing_qualityFlood": "Узнал из новостей, распространяющихся в интернете.",
+  "routing_qualityUntested": "Непроверенный",
+  "routing_neverWorked": "никогда не было подтверждено",
+  "routing_floodDelivery": "Доставка при затоплении",
+  "pathEditor_title": "Создать маршрут",
+  "pathEditor_hopCounter": "{count} из 64 хмеля",
+  "pathEditor_noHops": "На данный момент хмель еще не добавлен. Чтобы добавить его, нажмите на соответствующие кнопки ниже в нужном порядке, или сохраните рецепт без хмеля, чтобы отправить его напрямую.",
+  "pathEditor_addHops": "Добавляйте хмель в соответствии с указанным порядком.",
+  "pathEditor_searchRepeaters": "Поиск повторителей",
+  "pathEditor_advancedHex": "Продвинутый уровень: прямой путь в шестнадцатеричном формате",
+  "pathEditor_hexLabel": "Префиксы шестнадцатеричной системы",
+  "pathEditor_hexHelper": "Два шестнадцатеричных символа на каждом шаге, разделенные запятыми.",
+  "pathEditor_invalidTokens": "Неверно: {tokens}",
+  "routing_lastWorked": "worked {when}",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "pathEditor_tooManyHops": "Максимальное количество ингредиентов – 64",
+  "pathEditor_usePath": "Используйте этот путь",
+  "pathEditor_removeHop": "Удалить хмель",
+  "pathEditor_unknownHop": "Неизвестный ретранслятор",
+  "map_zoomIn": "Увеличить масштаб",
+  "map_zoomOut": "Увеличить масштаб",
+  "map_centerMap": "Карта центра",
+  "chrome_bluetoothRequiresChromium": "Для работы Web Bluetooth требуется браузер на основе Chromium.",
+  "channels_communityShortId": "Идентификатор: {id}...",
+  "pathTrace_legendGpsConfirmed": "GPS подтверждено",
+  "pathTrace_legendInferred": "Выведенная позиция"
 }

lib/l10n/app_sk.arb

@@ -33,6 +33,8 @@
   "common_remove": "Odstrániť",
   "common_enable": "Povolit",
   "common_disable": "Zakázať",
+  "common_autoRefresh": "Automatické obnovenie",
+  "common_interval": "Časový interval",
   "common_reboot": "Restartovať",
   "common_loading": "Načítavanie...",
   "common_notAvailable": "—",
@@ -52,7 +54,7 @@
       }
     }
   },
-  "scanner_title": "MeshCore Open",
+  "scanner_title": "MeshCore – Verzia pre verejnosť",
   "scanner_scanning": "Skrívania zariadení...",
   "scanner_connecting": "Pripojujem sa...",
   "scanner_disconnecting": "Odpojuje sa...",
@@ -104,6 +106,8 @@
   "settings_privacyModeEnabled": "Ochranný režim je povolený.",
   "settings_privacyModeDisabled": "Ochranný režim je vypnutý",
   "settings_actions": "Možné akcie",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "Odoslať reklamu",
   "settings_sendAdvertisementSubtitle": "Momentálne priezornejšie.",
   "settings_advertisementSent": "Reklama odeslaná",
@@ -121,7 +125,7 @@
   "settings_appDebugLog": "Záznam ladenia aplikácie",
   "settings_appDebugLogSubtitle": "Správy z ladenia aplikácie",
   "settings_about": "O nás",
-  "settings_aboutVersion": "MeshCore Open v{version}",
+  "settings_aboutVersion": "MeshCore, verzia {version}",
   "@settings_aboutVersion": {
     "placeholders": {
       "version": {
@@ -132,8 +136,8 @@
   "settings_aboutLegalese": "MeshCore Open Source Projekt 2024",
   "settings_aboutDescription": "Otvorený zdrojový Flutter klient pre MeshCore LoRa sieťové zariadenia.",
   "settings_infoName": "Meno",
-  "settings_infoId": "ID",
-  "settings_infoStatus": "Status",
+  "settings_infoId": "Identifikátor",
+  "settings_infoStatus": "Stav",
   "settings_infoBattery": "Batéria",
   "settings_infoPublicKey": "Verejný kľúč",
   "settings_infoContactsCount": "Počet kontaktov",
@@ -146,7 +150,7 @@
   "settings_spreadingFactor": "Rozptýľovací faktor",
   "settings_codingRate": "Cenový kurz pre programovanie",
   "settings_txPower": "TX Výkon (dBm)",
-  "settings_txPowerHelper": "0 - 22",
+  "settings_txPowerHelper": "0 – 22",
   "settings_txPowerInvalid": "Neplatná hodnota výkonu TX (0-22 dBm)",
   "settings_error": "Chyba: {message}",
   "@settings_error": {
@@ -164,19 +168,19 @@
   "appSettings_themeDark": "Tmavé",
   "appSettings_language": "Jazyk",
   "appSettings_languageSystem": "Predvolený systém",
-  "appSettings_languageEn": "English",
-  "appSettings_languageFr": "Français",
-  "appSettings_languageEs": "Español",
-  "appSettings_languageDe": "Deutsch",
-  "appSettings_languagePl": "Polski",
-  "appSettings_languageSl": "Slovenščina",
-  "appSettings_languagePt": "Português",
-  "appSettings_languageIt": "Italiano",
-  "appSettings_languageZh": "中文",
-  "appSettings_languageSv": "Svenska",
-  "appSettings_languageNl": "Nederlands",
+  "appSettings_languageEn": "Anglicky",
+  "appSettings_languageFr": "Francúzština",
+  "appSettings_languageEs": "Španielsky",
+  "appSettings_languageDe": "Nemecky",
+  "appSettings_languagePl": "Poľský",
+  "appSettings_languageSl": "Slovenčina",
+  "appSettings_languagePt": "Portugalčina",
+  "appSettings_languageIt": "Taliančina",
+  "appSettings_languageZh": "Čínština",
+  "appSettings_languageSv": "Švédska",
+  "appSettings_languageNl": "Niderlandsky",
   "appSettings_languageSk": "Slovenčina",
-  "appSettings_languageBg": "Български",
+  "appSettings_languageBg": "Българština",
   "appSettings_notifications": "Upozornenia",
   "appSettings_enableNotifications": "Povolte Notifikácie",
   "appSettings_enableNotificationsSubtitle": "Zísť o upozornenia na správy a inzeráty",
@@ -285,6 +289,7 @@
   "contacts_newGroup": "Nová skupina",
   "contacts_groupName": "Názov skupiny",
   "contacts_groupNameRequired": "Skupina musí mať názov.",
+  "contacts_groupNameReserved": "Tento názov skupiny je rezervovaný",
   "contacts_groupAlreadyExists": "Skupina \"{name}\" už existuje",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -336,11 +341,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "Kanál s hashtagom",
   "channels_public": "Veľké verejné",
   "channels_private": "Osobné",
-  "channels_publicChannel": "Veľké verejne kanály",
-  "channels_privateChannel": "Osobné kanál",
   "channels_editChannel": "Upraviť kanál",
   "channels_muteChannel": "Stlmiť kanál",
   "channels_unmuteChannel": "Zrušiť stlmenie kanála",
@@ -387,6 +389,22 @@
     }
   },
   "channels_smazCompression": "Odstránenie kompresie SMAZ",
+  "channels_cyr2latCompression": "Odstránenie kompresie Cyr2Lat",
+  "channels_cyr2latCompressionDscr": "Pri odosielaní nahradí niektoré znaky cyriliky latinskými znakmi.",
+  "channels_cyr2latSettingsHeading": "Nastavenia Cyr2Lat",
+  "channels_cyr2latSettingsSubheading": "Zoznam nahradení",
+  "channels_cyr2latSettingsDscr": "Upravte konfiguráciu JSON pre nahradenie znakov",
+  "channels_cyr2latSettingsDialogHint": "JSON mapa nahradení",
+  "channels_cyr2latSettingsDialogWrongJSON": "Nesprávny JSON: {error}",
+  "settings_cyr2latProfileAdd": "Pridať profil Cyr2Lat",
+  "settings_cyr2latProfileName": "Názov profilu",
+  "settings_cyr2latProfileNameEmpty": "Názov profilu nesmie byť prázdny",
+  "settings_cyr2latProfileAdded": "Profil bol úspešne pridaný",
+  "settings_cyr2latProfileUpdated": "Profil bol úspešne aktualizovaný",
+  "settings_cyr2latProfileEdit": "Upraviť profil Cyr2Lat",
+  "settings_cyr2latProfileDelete": "Odstrániť profil Cyr2Lat",
+  "settings_cyr2latProfileDeleted": "Profil bol úspešne odstránený",
+  "settings_cyr2latProfileDeleteDscr": "Naozaj chcete odstrániť profil \"{name}\"?",
   "channels_channelUpdated": "Kanál \"{name}\" bol aktualizovaný",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -398,7 +416,7 @@
   "channels_publicChannelAdded": "Veľký kanál pridaný",
   "channels_sortBy": "Triediť podľa",
   "channels_sortManual": "Ručne",
-  "channels_sortAZ": "A-Z",
+  "channels_sortAZ": "Od A po Z",
   "channels_sortLatestMessages": "Posledné správy",
   "channels_sortUnread": "Nezriadené",
   "chat_noMessages": "Zatiaľ žiadne správy.",
@@ -476,7 +494,7 @@
   "debugLog_noEntries": "Zatiaľ neboli zaznamenané žiadne debug logy.",
   "debugLog_enableInSettings": "Povolte ladicové logy v nastaveniach",
   "debugLog_frames": "Rámce",
-  "debugLog_rawLogRx": "Raw Log-RX",
+  "debugLog_rawLogRx": "Čistý log – RX",
   "debugLog_noBleActivity": "Zatiaľ žiadna aktivita BLE.",
   "debugFrame_length": "Dĺžka rámca: {count} bajtov",
   "@debugFrame_length": {
@@ -530,7 +548,7 @@
       }
     }
   },
-  "debugFrame_textTypeCli": "CLI",
+  "debugFrame_textTypeCli": "CLI (Command Line Interface)",
   "debugFrame_textTypePlain": "Jednoduché",
   "debugFrame_text": "- Text: \"{text}\"",
   "@debugFrame_text": {
@@ -540,7 +558,7 @@
       }
     }
   },
-  "debugFrame_hexDump": "Hex Dump:",
+  "debugFrame_hexDump": "Hexová analýza:",
   "chat_pathManagement": "Správa ciest",
   "chat_routingMode": "Režim trasy",
   "chat_autoUseSavedPath": "Použiť uloženú cestu",
@@ -549,7 +567,7 @@
   "chat_pathHistoryFull": "História ciest je plná. Odstráňte záznamy, aby ste mohli pridať nové.",
   "chat_hopSingular": "Skok",
   "chat_hopPlural": "Skákať",
-  "chat_hopsCount": "{count} {count, plural, =1{hop} other{hops}}",
+  "chat_hopsCount": "{count} {count, plural, =1{skok} other{skoky}}",
   "@chat_hopsCount": {
     "placeholders": {
       "count": {
@@ -878,11 +896,11 @@
   "path_setPath": "Nastaviť cestu",
   "repeater_management": "Správa opakérov",
   "repeater_managementTools": "Nástroje na správu",
-  "repeater_status": "Status",
+  "repeater_status": "Stav",
   "repeater_statusSubtitle": "Zobraziť stav, štatistiky a susedov repeatera",
   "repeater_telemetry": "Telemetria",
   "repeater_telemetrySubtitle": "Zobraziť telemetriu senzorov a systémových štatistík",
-  "repeater_cli": "CLI",
+  "repeater_cli": "CLI (Command Line Interface)",
   "repeater_cliSubtitle": "Pošlite príkazy opakovaču",
   "repeater_settings": "Nastavenia",
   "repeater_settingsSubtitle": "Konfigurujte parametre opakovača",
@@ -991,7 +1009,7 @@
   "repeater_guestPasswordHelper": "Prístupový heslo iba na čítanie",
   "repeater_radioSettings": "Nastavenia rádia",
   "repeater_frequencyMhz": "Frekvencia (MHz)",
-  "repeater_frequencyHelper": "300-2500 MHz",
+  "repeater_frequencyHelper": "300–2500 MHz",
   "repeater_txPower": "TX Power",
   "repeater_txPowerHelper": "1-30 dBm",
   "repeater_bandwidth": "Šírka pásma",
@@ -1058,6 +1076,81 @@
   },
   "repeater_confirm": "Potvrdiť",
   "repeater_settingsSaved": "Nastavenia boli uložené úspešne.",
+  "repeater_rxGain": "Zvýšený zisk RX",
+  "repeater_rxGainHelper": "Vyššia citlivosť, vyšší príkon (platí len pre modely SX1262/SX1268)",
+  "repeater_refreshRxGain": "Obnovte zvýšený zisk z RX",
+  "repeater_multiAcks": "Víťazné potvrdenia (víťazné ACK)",
+  "repeater_multiAcksSubtitle": "Potvrďte správy prostredníctvom viacerých trás pre lepšiu doručenie.",
+  "repeater_refreshMultiAcks": "Opätovne potvrďte viacero ACK signálov",
+  "repeater_networkHealth": "Zdravie siete",
+  "repeater_loopDetect": "Detekcia slučiek",
+  "repeater_loopDetectHelper": "Vytvorte balíčky, ktoré vizuálne pripomínajú slučky v síti.",
+  "repeater_loopDetectOff": "Vypnuté",
+  "repeater_loopDetectMinimal": "Minimálny",
+  "repeater_loopDetectModerate": "Stredný, mierny",
+  "repeater_loopDetectStrict": "Prísne",
+  "repeater_dutyCycle": "Cyklus činnosti",
+  "repeater_dutyCycleHelper": "Maximálna percentáľ dostupného času vysielania",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Informácie o poskytovateľovi",
+  "repeater_ownerInfoHelper": "Veľké dátové informácie pre tento vysielací zdroj",
+  "repeater_refreshOwnerInfo": "Zísť informácie o operátore",
+  "repeater_floodMax": "Maximálny počet skokov pri povodni",
+  "repeater_floodMaxHelper": "Maximálny počet paketov, ktoré môžu preletieť cez jeden hop (0-64)",
+  "repeater_advancedSettings": "Pokročilé",
+  "repeater_advancedSettingsSubtitle": "Ovládacie knopy pre skúsených operátorov",
+  "repeater_pathHashMode": "Režim hashovania cesty",
+  "repeater_pathHashModeHelper": "Byty použité na zakódovanie ID tohto opakovača v tagoch pre trasu/detekciu slučky. 0 = 1 bytu (256 ID, až 64 skokov), 1 = 2 byty (65 000 ID, až 32 skokov), 2 = 3 byty (16 miliónov ID, až 21 skokov). Verzie 1.13 a staršie nepodporujú viacbytové trasy – fungujú len, keď je sieť aktivovaná.",
+  "repeater_txDelay": "Zpoždanie v Flood, TX",
+  "repeater_txDelayHelper": "Nastavenie pre opakované vysielanie pre dopravu počas povodní, ako násobok času, ktorý paket využije (0-2, výchoce hodnota 0,5). Vyššia hodnota znamená menej kolízii, ale pomalšie doručovanie.",
+  "repeater_directTxDelay": "Priame oneskorenie TX",
+  "repeater_directTxDelayHelper": "Nastavenie pre retransmisiu pre priame (nie pre plnú sieť), ako násobok času prenosu paketov (0-2, výchoce 0,3).",
+  "repeater_intThresh": "Hranica, pri ktorej dochádza k rušeniu",
+  "repeater_intThreshHelper": "Hranica je nastavená tak, aby odfiltrovala šum nad touto úrovňou. Hodnota 0 znamená, že sa nebude nič odfiltrovať – nastavte ju len v prípade, že zaznamenáte chyby pri prijímaní signálu v šumnej frekvencii.",
+  "repeater_agcResetInterval": "Interval reštartu AGC",
+  "repeater_agcResetIntervalHelper": "Ako často by ste mali reštartovať automatické ovládanie zosilnenia, aby ste sa vrátili do normálneho stavu, ak je zosilnenie zablokované? Nastavenie „4.0“ vypne pravidelné reštarty.",
+  "repeater_actionsTitle": "Opatrenia",
+  "repeater_sendAdvert": "Odoslať inzerát o povodňovej situácii",
+  "repeater_sendAdvertSubtitle": "Zverejnite reklamu na povodňu prostredníctvom siete.",
+  "repeater_sendAdvertZeroHop": "Odoslať reklamu bez prenosu",
+  "repeater_sendAdvertZeroHopSubtitle": "Zverejnite reklamnú správu, ktorá sa prenáša len raz (bez prenosov).",
+  "repeater_clockSync": "Synchronizujte hodiny teraz",
+  "repeater_clockSyncSubtitle": "Nastavte čas na vašom telefóne, aby odpovedal na volania z vysielacieho zariadenia.",
+  "repeater_actionSucceeded": "{action} succeeded",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} failed: {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Nastavenia uložené – reštartujte vysielací prístroj, aby sa nastavenia aplikovali.",
+  "repeater_settingsPartialFailure": "Niektoré nastavenia neúspešné: {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "Chyba pri ukladaní nastavení: {error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1069,11 +1162,9 @@
   "repeater_refreshBasicSettings": "Obnoviť základné nastavenia",
   "repeater_refreshRadioSettings": "Obnoviť Nastavenia Rádií",
   "repeater_refreshTxPower": "Obnoviť TX napájanie",
-  "repeater_refreshLocationSettings": "Obnoviť Nastavenia Miesta",
   "repeater_refreshPacketForwarding": "Obnoviť smerovanie paketov",
   "repeater_refreshGuestAccess": "Obnoviť prístup hosťa",
   "repeater_refreshPrivacyMode": "Obnoviť Ochranný režim",
-  "repeater_refreshAdvertisementSettings": "Obnoviť nastavenia reklamy",
   "repeater_refreshed": "{label} sa znova načítalo",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1191,6 +1282,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "Digitálny vstup",
+  "telemetry_digitalOutputLabel": "Digitálny výstup",
+  "telemetry_analogInputLabel": "Analógový vstup",
+  "telemetry_analogOutputLabel": "Analógový výstup",
+  "telemetry_genericLabel": "Všeobecný senzor",
+  "telemetry_luminosityLabel": "Osvetlenie",
+  "telemetry_presenceLabel": "Prítomnosť",
+  "telemetry_humidityLabel": "Vlhkosť",
+  "telemetry_accelerometerLabel": "Akcelerometer",
+  "telemetry_pressureLabel": "Tlak",
+  "telemetry_altitudeLabel": "Nadmorská výška",
+  "telemetry_frequencyLabel": "Frekvencia",
+  "telemetry_percentageLabel": "Percento",
+  "telemetry_concentrationLabel": "Koncentrácia",
+  "telemetry_powerLabel": "Výkon",
+  "telemetry_distanceLabel": "Vzdialenosť",
+  "telemetry_energyLabel": "Energia",
+  "telemetry_directionLabel": "Smer",
+  "telemetry_timeLabel": "Čas",
+  "telemetry_gyrometerLabel": "Gyrometer",
+  "telemetry_colourLabel": "Farba",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Prepínač",
+  "telemetry_polylineLabel": "Lomená čiara",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Počet požiadaviek",
+  "telemetry_error": "Nepodarilo sa získať údaje",
   "telemetry_noData": "Nejsú dostupné žiadne údaje z telemetrie.",
   "telemetry_channelTitle": "Kanál {channel}",
   "@telemetry_channelTitle": {
@@ -1346,7 +1474,7 @@
   "listFilter_sortBy": "Triediť podľa",
   "listFilter_latestMessages": "Posledné správy",
   "listFilter_heardRecently": "Nedávno počuli.",
-  "listFilter_az": "A-Z",
+  "listFilter_az": "Od A po Z",
   "listFilter_filters": "Filtre",
   "listFilter_all": "Všetko",
   "listFilter_users": "Používatelia",
@@ -1618,8 +1746,8 @@
   "appSettings_unitsTitle": "Jednotky",
   "appSettings_unitsMetric": "Metrické (m / km)",
   "appSettings_unitsImperial": "Imperiálne (ft / mi)",
-  "map_lineOfSight": "Line of Sight",
-  "map_losScreenTitle": "Line of Sight",
+  "map_lineOfSight": "Úroveň výhľadu",
+  "map_losScreenTitle": "Úroveň výhľadu",
   "losSelectStartEnd": "Vyberte počiatočný a koncový uzol pre LOS.",
   "losRunFailed": "Kontrola priamej viditeľnosti zlyhala: {error}",
   "@losRunFailed": {
@@ -1878,8 +2006,8 @@
   "tcpHostLabel": "IP adresa",
   "tcpScreenTitle": "Spojte sa pomocou protokolu TCP",
   "connectionChoiceTcpLabel": "TCP",
-  "tcpPortLabel": "Port",
-  "tcpPortHint": "5000",
+  "tcpPortLabel": "Prístav",
+  "tcpPortHint": "5 000",
   "tcpStatus_notConnected": "Zadajte cieľovú adresu a pripojte sa.",
   "tcpStatus_connectingTo": "Pripojenie k {endpoint}...",
   "tcpErrorHostRequired": "Je potrebné zadať IP adresu.",
@@ -1888,5 +2016,435 @@
   "tcpErrorTimedOut": "Pripojenie TCP vypršalo.",
   "tcpConnectionFailed": "Neúspešné vytvorenie TCP spojenia: {error}",
   "map_showDiscoveryContacts": "Zobraziť kontakty objavov",
-  "map_setAsMyLocation": "Nastavte ako moju polohu"
+  "map_setAsMyLocation": "Nastavte ako moju polohu",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_privacy": "Nastavenia súkromia",
+  "settings_privacySubtitle": "Ovládni, aké informácie sa zdieľajú.",
+  "settings_telemetryLocationMode": "Režim umiestnenia telemetrie",
+  "settings_telemetryBaseMode": "Základný režim telemetrie",
+  "settings_advertLocation": "Umiestnenie inzerátu",
+  "settings_telemetryEnvironmentMode": "Režim prostredia telemetrie",
+  "settings_advertLocationSubtitle": "Zahrnúť polohu do inzerátu",
+  "settings_allowAll": "Povoliť všetko",
+  "settings_privacySettingsDescription": "Vyberte, ktoré informácie váš zariadenie zdieľa s ostatnými.",
+  "settings_denyAll": "Zamietnuť všetko",
+  "settings_allowByContact": "Povoliť podľa kontaktových vlajok",
+  "contact_info": "Kontaktné informácie",
+  "contact_settings": "Nastavenia kontaktov",
+  "contact_teleBaseSubtitle": "Povoliť zdieľanie úrovne batérie a základnej telemetrie",
+  "contact_teleLoc": "Lokácia telemetrie",
+  "contact_teleLocSubtitle": "Povoliť zdieľanie údajov o lokalite",
+  "contact_teleEnv": "Prostredie telemetrie",
+  "contact_telemetry": "Telemetria",
+  "contact_clearChat": "Vymazať chat",
+  "contact_lastSeen": "Naposledy videný",
+  "contact_teleBase": "Báza telemetrie",
+  "contact_teleEnvSubtitle": "Povoliť zdieľanie údajov senzorov prostredia",
+  "appSettings_maxRouteWeightSubtitle": "Maximálna hmotnosť, ktorú môže trás prenášať vďaka úspešným zásielkam.",
+  "appSettings_initialRouteWeightSubtitle": "Počiatočná váha pre nové, objavené cesty",
+  "appSettings_initialRouteWeight": "Počiatočná váha trasy",
+  "appSettings_maxRouteWeight": "Maximálna hmotnosť trasy",
+  "appSettings_routeWeightSuccessIncrement": "Zvyšenie váhy úspechu",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Hmotnosť pridaná k trase po úspešnej doručení",
+  "appSettings_routeWeightFailureDecrement": "Sníženie váhy, ktorá sa používa na odhad rizika.",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Hmotnosť odstránená z cesty po neúspešnej doručenie",
+  "appSettings_maxMessageRetries": "Maximalný počet pokusov o doručenie správ",
+  "appSettings_maxMessageRetriesSubtitle": "Počet pokusov o odošleť pred označením správy ako neúspešnej",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Režim telemetrie bol aktualizovaný",
+  "settings_multiAck": "Viaceré ACK",
+  "map_showOverlaps": "Prekrývanie opakovača kľúča",
+  "map_runTraceWithReturnPath": "Vráťte sa späť po tej istej ceste.",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "chat_sendCooldown": "Prosím, počkajte chvíľu, než zašlete znova.",
+  "appSettings_jumpToOldestUnread": "Presk oceň",
+  "appSettings_jumpToOldestUnreadSubtitle": "Pri otvorení chatu s neprečítanými správami, prejdite do prvého neprečítaného, namiesto poslednej.",
+  "appSettings_languageHu": "Maďarský",
+  "appSettings_languageJa": "Japonský",
+  "appSettings_languageKo": "Kórejský",
+  "radioStats_tooltip": "Statistiky rádiových a sieťových kanálov",
+  "radioStats_screenTitle": "Štatistiky rádiových vysielaní",
+  "radioStats_notConnected": "Pripojte sa k zariadeniu, aby ste mohli sledovať štatistiky rádiového vysielania.",
+  "radioStats_firmwareTooOld": "Statistické údaje z rádia vyžadujú sprievodný softvér verzie v8 alebo novšej.",
+  "radioStats_waiting": "Čakám na údaje…",
+  "radioStats_noiseFloor": "Úroveň hluku: {noiseDbm} dBm",
+  "radioStats_lastRssi": "Posledný údaj RSSI: {rssiDbm} dBm",
+  "radioStats_lastSnr": "Posledná hodnota SNR: {snr} dB",
+  "radioStats_txAir": "Čas vysielania na TX (celkový): {seconds} s",
+  "radioStats_rxAir": "Čas RX (celkový): {seconds} s",
+  "radioStats_chartCaption": "Úroveň šumu (dBm) pre posledné vzorky.",
+  "radioStats_stripNoise": "Úroveň hluku: {noiseDbm} dBm",
+  "radioStats_stripWaiting": "Získavanie údajov o rádiu…",
+  "radioStats_settingsTile": "Štatistiky rádiových vysielaní",
+  "radioStats_settingsSubtitle": "Úroveň hluku, RSSI, SNR a časové rozloženie",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_enableSubtitle": "Prekladajte prichádzajúce správy a umožnite ich preklad pred odoslaním.",
+  "translation_enableTitle": "Aktivovať preklad",
+  "translation_composerTitle": "Preložte pred odeslaním",
+  "translation_title": "Preklad",
+  "translation_composerSubtitle": "Riadi výchoce stav ikony pre preklad, ktorú používa program.",
+  "translation_autoIncomingTitle": "Automaticky prekladať správy",
+  "translation_autoIncomingSubtitle": "Automaticky prekladá správy pre upozornenia aj pre čet alebo kanál.",
+  "translation_translateMessage": "Preložiť správu",
+  "translation_targetLanguage": "Cieľový jazyk",
+  "translation_useAppLanguage": "Použite jazyk aplikácie",
+  "translation_downloadedModelLabel": "Stiahnutý model",
+  "translation_presetModelLabel": "Prednastavený model od Hugging Face",
+  "translation_manualUrlLabel": "Odkaz na manuál (v elektronickej forme)",
+  "translation_downloadModel": "Stiahnuť model",
+  "translation_downloading": "Stiahnutie...",
+  "translation_working": "Práca...",
+  "translation_stop": "Zastavte",
+  "translation_mergingChunks": "Sliečenie stiahnutých častí do konečného súboru...",
+  "translation_downloadedModels": "Stiahnuté modely",
+  "translation_deleteModel": "Odstrániť model",
+  "translation_modelDownloaded": "Model pre preklad bol stiahnutý.",
+  "translation_downloadStopped": "Stiahnutie bolo prerušené.",
+  "translation_downloadFailed": "Neúspešné stiahnutie: {error}",
+  "translation_enterUrlFirst": "Najprv zadajte URL pre konkrétny model.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "scanner_linuxPairingHidePin": "Skryť PIN",
+  "scanner_linuxPairingShowPin": "Zobraziť PIN",
+  "scanner_linuxPairingPinTitle": "PIN pre párovanie cez Bluetooth",
+  "scanner_linuxPairingPinPrompt": "Zadajte PIN pre {deviceName} (ak neexistuje, nechajte prázdne).",
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerDisabledHint": "Posielajte správy v pôvodnej písanom jazyku.",
+  "translation_composerEnabledHint": "Správy budú preložené, než budú odoslané.",
+  "translation_translateBeforeSending": "Preložte pred odeslaním",
+  "translation_messageTranslation": "Preklad textu",
+  "translation_translateTo": "Preložte do {language}",
+  "translation_translationOptions": "Možnosti prekladania",
+  "translation_systemLanguage": "Jazyk systému",
+  "repeater_cliQuickClockSync": "Synchronizácia hodin",
+  "repeater_cliQuickDiscovery": "Objaviť susedov",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLogin": "Synchronizácia hodiniek po prihlávení",
+  "repeater_clockSyncAfterLoginSubtitle": "Automaticky posielajte notifikáciu \"synchronizácia času\" po úspešnom prihládení.",
+  "chat_sendMessage": "Odoslať správu",
+  "repeater_guest": "Informácie o opakovači",
+  "room_guest": "Informácie o serveri",
+  "repeater_guestTools": "Nástroje pre hostí",
+  "repeater_getCategory": "Zísť hodnoty",
+  "repeater_powerMgmt": "Správa energie",
+  "repeater_sensors": "Senzory",
+  "repeater_cliHelpPowerOff": "Vypína zariadenie. (neočakáva sa žiadna odpoveď)",
+  "repeater_cliHelpClkReboot": "Resetuje hodiny na známu epochu a reštartuje zariadenie.",
+  "repeater_cliHelpAdvertZeroHop": "Rozosiela reklamu, ktorá sa prenáša len medzi susednými zariadeniami (bez prenosu cez iné siete).",
+  "repeater_cliHelpStartOta": "Spustí aktualizáciu firmvéru prostredníctvom diaľkového prenosu na podporovaných doskách.",
+  "repeater_cliHelpTime": "Nastavuje časovník zariadenia na zadané sekundy od Unix epochy. Časovník sa nedá otáčať dozadu.",
+  "repeater_cliHelpBoard": "Zobrazuje informácie o výrobcom dosky / identifikátor hardvéru.",
+  "repeater_cliHelpDiscoverNeighbors": "Odosiela požiadavku na nájdenie susedných uzlov. (Len pre opakovače)",
+  "repeater_cliHelpPowersaving": "Ukazuje, či je režim úspory energie zapnutý alebo vypnutý.",
+  "repeater_cliHelpPowersavingOnOff": "Umožňuje alebo vypína režim úspory energie (ak je podporovaný).",
+  "repeater_cliHelpErase": "(Používa sa len pre sériové zariadenia) Formátuje systém súborov zariadenia. Vymaže všetky nastavenia a kontakty.",
+  "repeater_cliHelpSetDutyCycle": "Nastavuje maximálnu povolenú frekvenciu prenosu ako percento (1-100). Internálne upravuje faktor času prenosu.",
+  "repeater_cliHelpSetPrvKey": "(Používa sa len v sériovej verzii) Nahradí privátny kľúč, ktorý identifikuje zariadenie. Po aplikácii je potrebné zariadenie reštartovať. Generuje nový verejný kľúč.",
+  "repeater_cliHelpSetRadioRxGain": "(iba pre SX126x) Zapína zvýšený zisk prijímania pre zlepšenie citlivosti pri vyššom príkonu.",
+  "repeater_cliHelpSetOwnerInfo": "Definuje reťazec s informáciami o kontaktnom osobě, ktorý je zahrnutý v reklamách. Používajte '|' pre nové riadky.",
+  "repeater_cliHelpSetPathHashMode": "Nastavuje režim hashovania cesty. 0 = starý režim, 1 = štandardný režim, 2 = striktný režim. Ovplyvňuje, ako sa prekladajú trasy.",
+  "repeater_cliHelpSetLoopDetect": "Nastavuje citlivosť detekcie slučky routovania: vypnutá, minimálna, stredná alebo prísna.",
+  "repeater_cliHelpSetFreq": "(Používa sa len v sériovej verzii) Rýchlo nastavuje len frekvenciu. Je potrebné reštartovať. Pre úplné nastavenie rádia preferujte funkciu \"nastavenie rádia\".",
+  "repeater_cliHelpSetBridgeChannel": "(Používa sa len pre ESPNow most) Nastavuje WiFi kanál (1-14), ktorý používa most.",
+  "repeater_cliHelpGetName": "Zobrazuje zadané meno uzla.",
+  "repeater_cliHelpGetRole": "Ukazuje funkciu firmvéru (opakovač, server pre miestnosť atď.).",
+  "repeater_cliHelpGetPublicKey": "Zobrazuje verejný kľúč zariadenia.",
+  "repeater_cliHelpGetPrvKey": "(Používa sa len v sériových aplikáciách) Zobrazuje súkromný kľúč zariadenia. Zotriďte ho ako tajný údaj.",
+  "repeater_cliHelpGetRepeat": "Ukazuje, či je funkcia preposielania paketov (funkcia opakéra) zapnutá alebo vypnutá.",
+  "repeater_cliHelpGetTx": "Zobrazuje aktuálnu výkonovú hodnotu TX v dBm.",
+  "repeater_cliHelpGetFreq": "Zobrazuje nakonfigurovanú frekvenciu v MHz.",
+  "repeater_cliHelpGetRadio": "Zobrazuje všetky parametre rádiového signálu: frekvencia, šírka pásma, faktor rozširovania, rýchlosť kódovania.",
+  "repeater_cliHelpGetRadioRxGain": "(iba pre SX126x) Zobrazuje stav zosilnenia prijímača RX.",
+  "repeater_cliHelpGetAf": "Zobrazuje aktuálny koeficient času vysielania.",
+  "repeater_cliHelpGetDutyCycle": "Zobrazuje aktuálnu povolenú frekvenciu ako percentáž.",
+  "repeater_cliHelpGetIntThresh": "Zobrazuje hranicu pre prechodové signály v dB.",
+  "repeater_cliHelpGetAgcResetInterval": "Zobrazuje interval reštartovania AGC v sekundách.",
+  "repeater_cliHelpGetMultiAcks": "Ukazuje, či je režim dvojité potvrdenie zapnutý (1) alebo vypnutý (0).",
+  "repeater_cliHelpGetAllowReadOnly": "Ukazuje, či je povolená len čítacia funkcia pre hostí.",
+  "repeater_cliHelpGetAdvertInterval": "Zobrazuje čas trvania miestnej reklamnej pauzy v minútach.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Zobrazuje časový interval reklamy počas záplavy v hodinách.",
+  "repeater_cliHelpGetGuestPassword": "Zobrazuje nastavené heslo pre hosta.",
+  "repeater_cliHelpGetLat": "Zobrazuje nastavenú šírku.",
+  "repeater_cliHelpGetLon": "Zobrazuje nastavenú dĺžku.",
+  "repeater_cliHelpGetRxDelay": "Zobrazuje základnú hodnotu rxdelay.",
+  "repeater_cliHelpGetTxDelay": "Ukazuje faktor zpoždenia pre režim povodňovej komunikácie.",
+  "repeater_cliHelpGetDirectTxDelay": "Zobrazuje faktor zloženia pri priamej modulácii.",
+  "repeater_cliHelpGetFloodMax": "Zobrazuje maximálny počet opakovaní povodňového stavu.",
+  "repeater_cliHelpGetOwnerInfo": "Zobrazuje reťazec s kontaktnými údajmi vlastníka.",
+  "repeater_cliHelpGetPathHashMode": "Zobrazuje režim hashovania cesty (0/1/2).",
+  "repeater_cliHelpGetLoopDetect": "Ukazuje citlivosť na detekciu slučiek.",
+  "repeater_cliHelpGetAcl": "(Používa sa len v sériovej konfigurácii) Zobrazuje prístupové pravidlá na opakovači.",
+  "repeater_cliHelpGetBridgeEnabled": "Ukazuje, či je most povolený.",
+  "repeater_cliHelpGetBridgeDelay": "Zobrazuje čas strávený prechodom mosta v milisekundách.",
+  "repeater_cliHelpGetBridgeSource": "Ukazuje, či most prijíma alebo vysiela RX alebo TX balíky.",
+  "repeater_cliHelpGetBridgeBaud": "(iba pre rozhranie RS232) Zobrazuje rýchlosť prenosu dát na rozhraní RS232.",
+  "repeater_cliHelpGetBridgeChannel": "(Používa sa len pre ESPNow) Zobrazuje WiFi kanál mosta.",
+  "repeater_cliHelpGetBridgeSecret": "(Používa sa len pre ESPNow most) Zobrazuje spoločný tajný kľúč mosta.",
+  "repeater_cliHelpGetBootloaderVer": "(iba pre NRF52) Zobrazuje verziu bootloaderu.",
+  "repeater_cliHelpGetAdcMultiplier": "Zobrazuje násobič ADC (škálovanie napätia batérie).",
+  "repeater_cliHelpGetPwrMgtSupport": "Označuje, či riadiace orgány majú podporu pre správu energie.",
+  "repeater_cliHelpGetPwrMgtSource": "Ukazuje aktuálny zdroj napájania: externý alebo batéria.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Zobrazuje najaktuálnejšie dôvody pre reštart a vypnutie.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Zobrazuje napätie batérie pri spustení systému v milivoltov (mV).",
+  "repeater_cliHelpSensorGet": "Číta hodnotu nastavenia pre špecifický senzor pomocou klávesového vstupu.",
+  "repeater_cliHelpSensorSet": "Vytvára vlastné nastavenie pre senzor.",
+  "repeater_cliHelpSensorList": "Zobrazuje všetky nastavenia pre špecifické senzory, zoradené podľa voliteľného indexu začiatku.",
+  "repeater_cliHelpRegionDefault": "Zobrazuje aktuálnu rozsiahku, ktorá je nastavená ako výchozí.",
+  "repeater_cliHelpRegionDefaultSet": "Nastavuje výchoce rozsiahku regiónu. Použite \"<null>\", aby ju vymazal.",
+  "repeater_cliHelpRegionListAllowed": "Zoznam oblastí, ktoré umožňujú premávku počas povodní.",
+  "repeater_cliHelpRegionListDenied": "Zoznam oblastí, ktoré zakazujú premávku v dôsledku povodní.",
+  "repeater_cliHelpStatsPackets": "(Len pre sériové záznamy) Zobrazuje štatistiky na úrovni paketov.",
+  "repeater_cliHelpStatsRadio": "(Len pre sériu) Zobrazuje údaje o rádiových staniciach.",
+  "repeater_cliHelpStatsCore": "(Len pre sériové modely) Zobrazuje základné štatistiky firmvéru.",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "map_sharedAt": "Zdieľané",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losBlockedSpotsTitle": "Zablokované miesta",
+  "losBlockedSpotsHint": "Kliknite na zablokované miesto, aby ste ho zvýraznili na mape.",
+  "losSelectedObstructionTitle": "Vybraná prekážka",
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "losSelectedObstructionDetails": "Blocked by {obstruction} {heightUnit}, {distanceFromA} from A and {distanceFromB} from B ({distanceUnit}).",
+  "chat_markAsUnread": "Označenie ako neprečítané",
+  "settings_companionDebugLogSubtitle": "Príkazy, odpovede a surové dáta pre protokoly BLE/TCP/USB",
+  "settings_companionDebugLog": "Logovanie pre ladenie (sprievodný log)",
+  "chat_newMessages": "Nové správy",
+  "repeater_chanUtil": "Využitie kanálu",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "messageStatus_sent": "Odoslané",
+  "messageStatus_delivered": "Doručené",
+  "messageStatus_pending": "Odoslanie",
+  "common_undo": "Zrušiť",
+  "messageStatus_failed": "Neúspešné odeslanie",
+  "messageStatus_repeated": "Slyšal som to opakovane",
+  "contacts_moreOptions": "Ďalšie možnosti",
+  "contacts_searchOpen": "Vyhľadajte kontakty",
+  "contacts_searchClose": "Zavrieť vyhľadávanie",
+  "routing_title": "Navigácia",
+  "routing_modeAuto": "Auto",
+  "routing_modeFlood": "Povodňová vlna",
+  "routing_modeManual": "Ručná príručka",
+  "routing_modeAutoHint": "Automaticky vyberá najznámejší trasa, a ak žiadna nie je známa, použije náhodnú trasu.",
+  "routing_modeFloodHint": "Prenos prostredníctvom všetkých opakovačov. Najspoľahlivejší spôsob, ale vyžaduje viac času vysielania.",
+  "routing_modeManualHint": "Vždy dodáva presne podľa zadaného trasy.",
+  "routing_currentRoute": "Aktuálna trasa",
+  "routing_directNoHops": "Priamo – bez prechodných trás",
+  "routing_noPathYet": "Zatiaľ neexistuje žiadna cesta. Nasledujúce správy budú pokračovať, kým sa nenájde trasa.",
+  "routing_floodBroadcast": "Prenos prostredníctvom každého opakovača",
+  "routing_editPath": "Upraviť trasu",
+  "routing_forgetPath": "Zabudnite na trasu",
+  "routing_knownPaths": "Známe cesty",
+  "routing_knownPathsHint": "Kliknite na cestu, aby ste sa k nej presunuli.",
+  "routing_inUse": "V prevádzke",
+  "routing_qualityStrong": "Silný prvý krok",
+  "routing_qualityGood": "Úspešný prvý krok",
+  "routing_qualityFair": "Prvá, spravodlivá fáza",
+  "routing_qualityWorked": "Dosiahnutý úspech",
+  "routing_qualityFlood": "Zistil som to z informácií, ktoré som získal v dôsledku povodňovej situácie.",
+  "routing_qualityUntested": "Neotestované",
+  "routing_neverWorked": "nikedy nebolo potvrdené",
+  "routing_floodDelivery": "Doručenie v prípade povodní",
+  "pathEditor_title": "Vytvorenie cesty",
+  "pathEditor_hopCounter": "{count} z 64 chmelových zŕš",
+  "pathEditor_noHops": "Zatiaľ žiadne chmel. Kliknite na opakované, aby ste ich pridali postupne, alebo uložte bez chmelu, aby ste ho mohli poslať priamo.",
+  "pathEditor_addHops": "Pridávajte chmel podľa zadaného poriadku.",
+  "pathEditor_searchRepeaters": "Hľadať opakované",
+  "pathEditor_advancedHex": "Pokročilé: pôvodná hexová cesta",
+  "pathEditor_hexLabel": "Prefiksy pre hexadecimálne čísla",
+  "pathEditor_hexHelper": "Dve hexové čísla na každý krok, oddelené čiarkami",
+  "routing_lastWorked": "worked {when}",
+  "pathEditor_invalidTokens": "Neplatné: {tokens}",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "pathEditor_tooManyHops": "Maximálne 64 krokov",
+  "pathEditor_usePath": "Použite túto cestu",
+  "pathEditor_removeHop": "Odstráňte chmel",
+  "pathEditor_unknownHop": "Neznáme zariadenie na opakované vysielanie",
+  "map_zoomIn": "Zväčšiť",
+  "map_zoomOut": "Zmenť zamer zblízka",
+  "map_centerMap": "Mapa centra",
+  "chrome_bluetoothRequiresChromium": "Web Bluetooth vyžaduje prehliadač Chromium.",
+  "channels_communityShortId": "ID: {id}...",
+  "pathTrace_legendGpsConfirmed": "GPS potvrdilo",
+  "pathTrace_legendInferred": "Odvodená poloha"
 }

lib/l10n/app_sl.arb

@@ -33,6 +33,8 @@
   "common_remove": "Izbrisati",
   "common_enable": "Omogoči",
   "common_disable": "Izklopiti",
+  "common_autoRefresh": "Samodejno osveževanje",
+  "common_interval": "Časovni interval",
   "common_reboot": "Ponoviti",
   "common_loading": "Naložanje...",
   "common_notAvailable": "—",
@@ -44,7 +46,7 @@
       }
     }
   },
-  "common_percentValue": "{percent}%",
+  "common_percentValue": "{percent} %",
   "@common_percentValue": {
     "placeholders": {
       "percent": {
@@ -52,7 +54,7 @@
       }
     }
   },
-  "scanner_title": "MeshCore Open",
+  "scanner_title": "MeshCore – Odprto",
   "scanner_scanning": "Skeniram za naprave...",
   "scanner_connecting": "Povezujem se...",
   "scanner_disconnecting": "Odklapljam se...",
@@ -104,6 +106,8 @@
   "settings_privacyModeEnabled": "Privatni način je omogočen.",
   "settings_privacyModeDisabled": "Privatni način je onemogočen.",
   "settings_actions": "Akcije",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "Pošlji Oglas",
   "settings_sendAdvertisementSubtitle": "Trenutna prisotnost v oddajah",
   "settings_advertisementSent": "Oglas poslan",
@@ -115,13 +119,13 @@
   "settings_rebootDevice": "Ponovni zagon naprave",
   "settings_rebootDeviceSubtitle": "Ponovno zaženi MeshCore napravo",
   "settings_rebootDeviceConfirm": "Ste prepričani, da želite ponovno zagnati napravo? Povezava bo prekinjena.",
-  "settings_debug": "Debug",
+  "settings_debug": "Odpravljanje napak",
   "settings_bleDebugLog": "BLE debug log (razhroščevanje)",
   "settings_bleDebugLogSubtitle": "BLE ukazi, odgovori in surovi podatki",
   "settings_appDebugLog": "Logi aplikacije",
   "settings_appDebugLogSubtitle": "Debug sporočila aplikacije",
   "settings_about": "Oglejte si",
-  "settings_aboutVersion": "MeshCore Open v{version}",
+  "settings_aboutVersion": "MeshCore, različ {version}",
   "@settings_aboutVersion": {
     "placeholders": {
       "version": {
@@ -133,7 +137,7 @@
   "settings_aboutDescription": "Odprtokodni Flutter klient za naprave za LoRa omrežje MeshCore.",
   "settings_infoName": "Ime",
   "settings_infoId": "ID",
-  "settings_infoStatus": "Status",
+  "settings_infoStatus": "Stanje",
   "settings_infoBattery": "Baterija",
   "settings_infoPublicKey": "Javni ključ",
   "settings_infoContactsCount": "Število stikov",
@@ -146,7 +150,7 @@
   "settings_spreadingFactor": "Razširitveni faktor",
   "settings_codingRate": "Programska hitrost",
   "settings_txPower": "TX Moč (dBm)",
-  "settings_txPowerHelper": "0 - 22",
+  "settings_txPowerHelper": "0 – 22",
   "settings_txPowerInvalid": "Neveljavna TX moč (0-22 dBm)",
   "settings_error": "Napaka: {message}",
   "@settings_error": {
@@ -164,18 +168,18 @@
   "appSettings_themeDark": "Temno",
   "appSettings_language": "Jezik",
   "appSettings_languageSystem": "Sistemska privzeta vrednost",
-  "appSettings_languageEn": "English",
-  "appSettings_languageFr": "Français",
-  "appSettings_languageEs": "Español",
-  "appSettings_languageDe": "Deutsch",
-  "appSettings_languagePl": "Polski",
+  "appSettings_languageEn": "Angleščina",
+  "appSettings_languageFr": "Francija",
+  "appSettings_languageEs": "Španščina",
+  "appSettings_languageDe": "Nemščina",
+  "appSettings_languagePl": "Poljski",
   "appSettings_languageSl": "Slovenščina",
-  "appSettings_languagePt": "Português",
-  "appSettings_languageIt": "Italiano",
+  "appSettings_languagePt": "Portugalski",
+  "appSettings_languageIt": "Italijanščina",
   "appSettings_languageZh": "中文",
-  "appSettings_languageSv": "Svenska",
-  "appSettings_languageNl": "Nederlands",
-  "appSettings_languageSk": "Slovenčina",
+  "appSettings_languageSv": "Švedska",
+  "appSettings_languageNl": "Nizozemsko",
+  "appSettings_languageSk": "Slovenščina",
   "appSettings_languageBg": "Български",
   "appSettings_notifications": "Obvestila",
   "appSettings_enableNotifications": "Omogoči obvestila",
@@ -285,6 +289,7 @@
   "contacts_newGroup": "Nova skupina",
   "contacts_groupName": "Ime skupine",
   "contacts_groupNameRequired": "Ime skupine je obvezno.",
+  "contacts_groupNameReserved": "To ime skupine je rezervirano",
   "contacts_groupAlreadyExists": "Skupina \"{name}\" že obstaja",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -336,11 +341,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "Hashtag kanal",
   "channels_public": "Javni",
   "channels_private": "Zasebni",
-  "channels_publicChannel": "Javni kanal",
-  "channels_privateChannel": "Zasebni kanal",
   "channels_editChannel": "Uredi kanal",
   "channels_muteChannel": "Utišaj kanal",
   "channels_unmuteChannel": "Vklopi obvestila kanala",
@@ -387,6 +389,22 @@
     }
   },
   "channels_smazCompression": "Kompresija SMAZ",
+  "channels_cyr2latCompression": "Kompresija Cyr2Lat",
+  "channels_cyr2latCompressionDscr": "Pri pošiljanju nekatere cirilice nadomesti z latiničnimi.",
+  "channels_cyr2latSettingsHeading": "Nastavitve Cyr2Lat",
+  "channels_cyr2latSettingsSubheading": "Seznam zamenjav",
+  "channels_cyr2latSettingsDscr": "Uredi JSON-konfiguracijo zamenjav znakov",
+  "channels_cyr2latSettingsDialogHint": "JSON-tabela zamenjav",
+  "channels_cyr2latSettingsDialogWrongJSON": "Nepravilen JSON: {error}",
+  "settings_cyr2latProfileAdd": "Dodaj profil Cyr2Lat",
+  "settings_cyr2latProfileName": "Ime profila",
+  "settings_cyr2latProfileNameEmpty": "Ime profila ne sme biti prazno",
+  "settings_cyr2latProfileAdded": "Profil je bil uspešno dodan",
+  "settings_cyr2latProfileUpdated": "Profil je bil uspešno posodobljen",
+  "settings_cyr2latProfileEdit": "Uredi profil Cyr2Lat",
+  "settings_cyr2latProfileDelete": "Izbriši profil Cyr2Lat",
+  "settings_cyr2latProfileDeleted": "Profil je bil uspešno izbrisan",
+  "settings_cyr2latProfileDeleteDscr": "Ali res želite izbrisati profil \"{name}\"?",
   "channels_channelUpdated": "Kanal {name} je bil posodobljen",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -398,7 +416,7 @@
   "channels_publicChannelAdded": "javna skupnost dodana",
   "channels_sortBy": "Sortiraj po",
   "channels_sortManual": "Ročno",
-  "channels_sortAZ": "A-Z",
+  "channels_sortAZ": "A do Z",
   "channels_sortLatestMessages": "Najnovejše sporočilo",
   "channels_sortUnread": "Nerešeno",
   "chat_noMessages": "Še ni sporočil.",
@@ -530,7 +548,7 @@
       }
     }
   },
-  "debugFrame_textTypeCli": "CLI",
+  "debugFrame_textTypeCli": "CLI (Command Line Interface)",
   "debugFrame_textTypePlain": "Preprosto",
   "debugFrame_text": "- Tekst: \"{text}\"",
   "@debugFrame_text": {
@@ -540,7 +558,7 @@
       }
     }
   },
-  "debugFrame_hexDump": "Hex Dump:",
+  "debugFrame_hexDump": "Izpis heksadecimalnih vrednosti:",
   "chat_pathManagement": "Upravljanje poti",
   "chat_routingMode": "Navodilo za usmerjevalni način",
   "chat_autoUseSavedPath": "Avto (uporabi shranjeno pot)",
@@ -549,7 +567,7 @@
   "chat_pathHistoryFull": "Zapiske o poti so popolni. Izbriši vnose, da dodaš nove.",
   "chat_hopSingular": "skok",
   "chat_hopPlural": "skokov",
-  "chat_hopsCount": "{count} {count, plural, =1{hop} other{hops}}",
+  "chat_hopsCount": "{count} {count, plural, =1{skok} other{skoki}}",
   "@chat_hopsCount": {
     "placeholders": {
       "count": {
@@ -878,11 +896,11 @@
   "path_setPath": "Nastavi Pot",
   "repeater_management": "Upravljanje ponovitve",
   "repeater_managementTools": "Upravne orodje",
-  "repeater_status": "Status",
+  "repeater_status": "Stanje",
   "repeater_statusSubtitle": "Pogledati stanje, statistike in sosede repeatera",
   "repeater_telemetry": "Telemetrija",
   "repeater_telemetrySubtitle": "Pogledate telemetrijo senzorjev in sistemske statistike",
-  "repeater_cli": "CLI",
+  "repeater_cli": "CLI (Command Line Interface)",
   "repeater_cliSubtitle": "Pošlji ukazne povelje na ponovitveno enoto.",
   "repeater_settings": "Nastavitve",
   "repeater_settingsSubtitle": "Konfigurirajte parametre ponovitelja",
@@ -991,7 +1009,7 @@
   "repeater_guestPasswordHelper": "Odpovedni dostopni geslo",
   "repeater_radioSettings": "Nastavitve Radija",
   "repeater_frequencyMhz": "Frekvenca (MHz)",
-  "repeater_frequencyHelper": "300-2500 MHz",
+  "repeater_frequencyHelper": "300–2500 MHz",
   "repeater_txPower": "TX Moč",
   "repeater_txPowerHelper": "1-30 dBm",
   "repeater_bandwidth": "Pasovna širina",
@@ -1058,6 +1076,81 @@
   },
   "repeater_confirm": "Potrdit",
   "repeater_settingsSaved": "Nastavitve so shranjene uspešno.",
+  "repeater_rxGain": "Povečana dobitka RX",
+  "repeater_rxGainHelper": "Veća občutljivost, večji porabljeni tok (velja samo za SX1262/SX1268)",
+  "repeater_refreshRxGain": "Povečana dobitka RX, posodobit",
+  "repeater_multiAcks": "Več potrdil",
+  "repeater_multiAcksSubtitle": "Potrdite sporočila po več poti za boljši dostop",
+  "repeater_refreshMultiAcks": "Ponovite več potrdil",
+  "repeater_networkHealth": "Zdravilo omrežja",
+  "repeater_loopDetect": "Detekcija ciklov",
+  "repeater_loopDetectHelper": "Izpišite pakete, ki izgledajo kot pete v omrežju.",
+  "repeater_loopDetectOff": "Izklopljeno",
+  "repeater_loopDetectMinimal": "Minimalen",
+  "repeater_loopDetectModerate": "Umiren",
+  "repeater_loopDetectStrict": "Strogi",
+  "repeater_dutyCycle": "Ciklus delovanja",
+  "repeater_dutyCycleHelper": "Najvišji odstotek časa, ki ga lahko posreduje.",
+  "repeater_dutyCyclePercent": "{percent} %",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Informacije o operaterju",
+  "repeater_ownerInfoHelper": "javni podatki o tej napravi",
+  "repeater_refreshOwnerInfo": "Prejmi informacije o operaterju",
+  "repeater_floodMax": "Največji možni odmerek",
+  "repeater_floodMaxHelper": "Največje število paketov, ki lahko potujejo v enem plovilnem paketu (0-64)",
+  "repeater_advancedSettings": "Napredno",
+  "repeater_advancedSettingsSubtitle": "Gumbi za nastavljanje za izkušene uporabnike",
+  "repeater_pathHashMode": "Način ustvarjanja hash-a poti",
+  "repeater_pathHashModeHelper": "Biti, ki so bila uporabljena za kodiranje ID-ja tega releja v oznakah za zaznavanje pot/kroga, imajo naslednje velikosti: 0=1 bit (256 ID-jev, do 64 skokov), 1=2 biti (65.000 ID-jev, do 32 skokov), 2=3 biti (16 milijonov ID-jev, do 21 skokov). V različicah 1.13 in starejših se ustvarjajo večbitne poti – vendar se to zgodi šele, ko je omrežje vklopljeno v različicah 1.14 in kasnejših.",
+  "repeater_txDelay": "Zatemnitevanje zaradi poplav v Texasu",
+  "repeater_txDelayHelper": "Uporaba intervalov za ponovno pošiljanje v primeru prometa zaradi poplav, kot pomnožnik časovne trajanje paketa (0-2, privzeto 0,5). Veje vrednost = manjše kolizije, vendar počasnejše dostavo.",
+  "repeater_directTxDelay": "Neposredni časovno odlašanje",
+  "repeater_directTxDelayHelper": "Razdalja za ponovno pošiljanje za neposredno (neobvezen) promet, kot pomnožnik časovne trajanja paketa (0-2, privzeto 0,3).",
+  "repeater_intThresh": "Meja, pri kateri nastane motnja",
+  "repeater_intThreshHelper": "Tretja stopnja se uporablja za kalibracijo šumnega nivoja radija, kar omogoča, da se izklaplja pri šumu, ki presega to raven. 0 izklopi – uporabite le, če zaznate napake v šumnem pasu.",
+  "repeater_agcResetInterval": "Interval ponovne kalibracije AGC",
+  "repeater_agcResetIntervalHelper": "Kako pogosto je treba ponovno nastaviti samodejno regulacijo občutljivosti, da se vrnete v normalno stanje? Interval je nastavljen na nekaj sekund, natančno na 4. 0 izklopi periodično ponovno nastavljanje.",
+  "repeater_actionsTitle": "Dejanja",
+  "repeater_sendAdvert": "Pošlji oglas o poplavah",
+  "repeater_sendAdvertSubtitle": "Razpustite oglas o poplavah preko omrežja.",
+  "repeater_sendAdvertZeroHop": "Pošlji oglas, ki ne potrebuje posrednika.",
+  "repeater_sendAdvertZeroHopSubtitle": "Premejte oglas, ki uporablja eno povezavo (brez posrednikov).",
+  "repeater_clockSync": "Sinerizirajte uro zdaj",
+  "repeater_clockSyncSubtitle": "Nastavite čas na telefonu, da se sinhronizira s repeatrom.",
+  "repeater_actionSucceeded": "{action} je uspel",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} ni bilo uspešno: {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Nastavitve shranjene – ponovni zagon repetitorja za uporabo",
+  "repeater_settingsPartialFailure": "Nekatna nastavitva niso uspešna: {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "Napaka pri shranjevanju nastavitev: {error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1069,11 +1162,9 @@
   "repeater_refreshBasicSettings": "Ponovno nastavi osnovne nastavitve",
   "repeater_refreshRadioSettings": "Ponovno Nastavitve Radija",
   "repeater_refreshTxPower": "Ponovno nastavi TX moč",
-  "repeater_refreshLocationSettings": "Ponovno Nastavi Nastavitve Lokacije",
   "repeater_refreshPacketForwarding": "Ponovno nastavitve usmerjevanja paketa",
   "repeater_refreshGuestAccess": "Ponovno nastavitve dostopa gostov",
   "repeater_refreshPrivacyMode": "Ponovno aktiviraj način zasebnosti",
-  "repeater_refreshAdvertisementSettings": "Ponovno nastavi Oglede Oglasi",
   "repeater_refreshed": "{label} je bil/a posodobljen/a",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1191,6 +1282,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "Digitalni vhod",
+  "telemetry_digitalOutputLabel": "Digitalni izhod",
+  "telemetry_analogInputLabel": "Analogni vhod",
+  "telemetry_analogOutputLabel": "Analogni izhod",
+  "telemetry_genericLabel": "Splošni senzor",
+  "telemetry_luminosityLabel": "Osvetljenost",
+  "telemetry_presenceLabel": "Prisotnost",
+  "telemetry_humidityLabel": "Vlažnost",
+  "telemetry_accelerometerLabel": "Merilnik pospeška",
+  "telemetry_pressureLabel": "Tlak",
+  "telemetry_altitudeLabel": "Nadmorska višina",
+  "telemetry_frequencyLabel": "Frekvenca",
+  "telemetry_percentageLabel": "Odstotek",
+  "telemetry_concentrationLabel": "Koncentracija",
+  "telemetry_powerLabel": "Moč",
+  "telemetry_distanceLabel": "Razdalja",
+  "telemetry_energyLabel": "Energija",
+  "telemetry_directionLabel": "Smer",
+  "telemetry_timeLabel": "Čas",
+  "telemetry_gyrometerLabel": "Žiroskop",
+  "telemetry_colourLabel": "Barva",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Stikalo",
+  "telemetry_polylineLabel": "Polilinija",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Število zahtev",
+  "telemetry_error": "Podatkov ni bilo mogoče pridobiti",
   "telemetry_noData": "Niso na voljo podatki o telemetriji.",
   "telemetry_channelTitle": "Kanal {channel}",
   "@telemetry_channelTitle": {
@@ -1346,7 +1474,7 @@
   "listFilter_sortBy": "Sortiraj po",
   "listFilter_latestMessages": "Najnovejše sporočilo",
   "listFilter_heardRecently": "Nedavno slišan",
-  "listFilter_az": "A-Z",
+  "listFilter_az": "A do Z",
   "listFilter_filters": "Filtri",
   "listFilter_all": "Vse",
   "listFilter_users": "Uporabniki",
@@ -1888,5 +2016,435 @@
   "tcpErrorTimedOut": "Povezava TCP je presegla časovno obdobje.",
   "tcpConnectionFailed": "Napaka pri povezavi TCP: {error}",
   "map_showDiscoveryContacts": "Prikaži odkritja kontaktov",
-  "map_setAsMyLocation": "Nastavite to kot mojo lokacijo"
+  "map_setAsMyLocation": "Nastavite to kot mojo lokacijo",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_privacy": "Nastavitve zasebnosti",
+  "settings_privacySettingsDescription": "Izberite, katere informacije vaš naprava deli z drugimi.",
+  "settings_telemetryBaseMode": "Osnovni način telemetrije",
+  "settings_telemetryLocationMode": "Način delovanja telemetrije",
+  "settings_telemetryEnvironmentMode": "Način delovanja okolja telemetrije",
+  "settings_advertLocation": "Lokacija oglasa",
+  "settings_allowByContact": "Dovoli po kontaktnih zastavah",
+  "settings_denyAll": "Zavrniti vse",
+  "settings_allowAll": "Dovoli vse",
+  "settings_privacySubtitle": "Kontrolirajte, katere informacije so deljene.",
+  "contact_info": "Kontaktni podatki",
+  "contact_teleBase": "Baza telemetrije",
+  "contact_teleBaseSubtitle": "Dovoli deljenje stanja baterije in osnovne telemetrije",
+  "contact_teleLoc": "Lokacija telemetrije",
+  "contact_lastSeen": "Zadnjič videno",
+  "contact_settings": "Nastavitve stika",
+  "settings_advertLocationSubtitle": "Vključi lokacijo v oglas.",
+  "contact_telemetry": "Telemetrija",
+  "contact_clearChat": "Počisti klepet",
+  "contact_teleEnv": "Okolje telemetrije",
+  "contact_teleEnvSubtitle": "Dovoli deljenje podatkov okoljskih senzorjev",
+  "contact_teleLocSubtitle": "Dovoli deljenje podatkov o lokaciji",
+  "appSettings_maxRouteWeightSubtitle": "Največja teža, ki jo lahko pot doseže s uspešnimi dostavnami.",
+  "appSettings_initialRouteWeight": "Izvirna teža poti",
+  "appSettings_initialRouteWeightSubtitle": "Izguba teže za nove, odkriti poti",
+  "appSettings_maxRouteWeight": "Največja dovoljena teža poti",
+  "appSettings_routeWeightSuccessIncrement": "Učinkovitost: povečanje",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Težava, dodana poti po uspešni dostavi",
+  "appSettings_routeWeightFailureDecrement": "Zmanjšanje teže, ki je povezana s pomanjkanjem",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Težo, ki ni bila uspešno dostavljena, odstranili s poti.",
+  "appSettings_maxMessageRetries": "Najve število poskusov pošiljanja sporočil",
+  "appSettings_maxMessageRetriesSubtitle": "Število poskusov ponovnega poslanja, preden se sporočilo označuje kot neuspešno",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Način telemetrije posodobljen",
+  "map_showOverlaps": "Prekrivanje ključa ponovnega predvajanja",
+  "map_runTraceWithReturnPath": "Vrni se nazaj po isti poti.",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "appSettings_languageHu": "Madžarski",
+  "appSettings_jumpToOldestUnreadSubtitle": "Ko odpirate klepet z neprebranimi sporočili, se premaknite na prvo neprebrano sporočilo, namesto najnovejšega.",
+  "chat_sendCooldown": "Prosimo, počakajte trenutek, preden pošljete ponovno.",
+  "appSettings_jumpToOldestUnread": "Pritisnite za najstarejše nepročitano sporočilo",
+  "appSettings_languageJa": "Japonski",
+  "appSettings_languageKo": "Korejski",
+  "radioStats_tooltip": "Statistike za radio in mrežo",
+  "radioStats_notConnected": "Povežite se z napravo, da si ogledate statistiko o radiju.",
+  "radioStats_screenTitle": "Radijske statistike",
+  "radioStats_firmwareTooOld": "Statistika za radio zahteva združljivo programsko opremo v8 ali kasnejše.",
+  "radioStats_waiting": "Čakam na podatke…",
+  "radioStats_noiseFloor": "Število šuma: {noiseDbm} dBm",
+  "radioStats_lastRssi": "Najkasnejše vrednost RSSI: {rssiDbm} dBm",
+  "radioStats_lastSnr": "Najkasnejše vrednost SNR: {snr} dB",
+  "radioStats_txAir": "Čas na TX (skupno): {seconds} s",
+  "radioStats_rxAir": "Čas, namenjen RX-ju (skupno): {seconds} s",
+  "radioStats_chartCaption": "Ravnovredna raven šuma (dBm) za nedavne vzorce.",
+  "radioStats_stripNoise": "Število šuma: {noiseDbm} dBm",
+  "radioStats_stripWaiting": "Prejemanje statistike o radiju…",
+  "radioStats_settingsTile": "Radijske statistike",
+  "radioStats_settingsSubtitle": "Število šumov, RSSI, SNR in čas, ki ga je napolnila oprema",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerTitle": "Preprištejte, preden pošljete",
+  "translation_title": "Prevod",
+  "translation_enableSubtitle": "Prevedite vstopne sporočila in omogočite predhodno prevajanje.",
+  "translation_enableTitle": "Omogočite prevod",
+  "translation_composerSubtitle": "Ureja privzeto stanje ikone za prevod, ki jo uporablja avtor.",
+  "translation_autoIncomingTitle": "Samodejno prevajaj sporočila",
+  "translation_autoIncomingSubtitle": "Samodejno prevaja sporočila za obvestila ter za klepete ali kanale.",
+  "translation_translateMessage": "Prevedi sporočilo",
+  "translation_targetLanguage": "Ciljna jezika",
+  "translation_useAppLanguage": "Uporabite jezik aplikacije",
+  "translation_downloadedModelLabel": "Naložen model",
+  "translation_presetModelLabel": "Prednastavljeni model Hugging Face",
+  "translation_manualUrlLabel": "URL za ročni model",
+  "translation_downloadModel": "Prenesite model",
+  "translation_downloading": "Izvajanje...",
+  "translation_working": "Delo...",
+  "translation_stop": "Prekliji",
+  "translation_mergingChunks": "Sklapljanje prenesenih delov v končni datoteko...",
+  "translation_downloadedModels": "Naloženi modeli",
+  "translation_deleteModel": "Izbrisati model",
+  "translation_modelDownloaded": "Model za prevajanje je bil naložen.",
+  "translation_downloadStopped": "Prenos je bil prekinjen.",
+  "translation_downloadFailed": "Izgovoritev ni bila uspešna: {error}",
+  "translation_enterUrlFirst": "Najprej vnesite URL model.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_translateBeforeSending": "Preprištejte, preden pošljete",
+  "translation_composerDisabledHint": "Pošljite sporočila v originalnem tipkanem jeziku.",
+  "translation_composerEnabledHint": "Vsebina sporočil bo prevedena, preden jih pošljemo.",
+  "translation_messageTranslation": "Prevod sporočila",
+  "translation_translateTo": "Prevesti v {language}",
+  "translation_translationOptions": "Možnosti prevoda",
+  "translation_systemLanguage": "Jezik sistema",
+  "scanner_linuxPairingShowPin": "Prikaži PIN",
+  "scanner_linuxPairingHidePin": "Skrij PIN",
+  "scanner_linuxPairingPinPrompt": "Vnesite PIN za {deviceName} (pustite prazno, če ga ni).",
+  "scanner_linuxPairingPinTitle": "Bluetooth PIN za seznanjanje",
+  "repeater_cliQuickDiscovery": "Odkrijte sosede",
+  "repeater_cliQuickClockSync": "Usklajevanje ure",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLoginSubtitle": "Samodejno po uspešnem vstopu pošljite obvestilo o sinhronizaciji časa.",
+  "repeater_clockSyncAfterLogin": "Sinhronizacija ure po prijavi",
+  "repeater_guest": "Informacije o ponovljalniku",
+  "chat_sendMessage": "Pošlji sporočilo",
+  "room_guest": "Informacije o strežniku",
+  "repeater_guestTools": "Naložila za goste",
+  "repeater_getCategory": "Dobite vrednosti",
+  "repeater_powerMgmt": "Upravljanje z energijo",
+  "repeater_sensors": "Senzori",
+  "repeater_cliHelpPowerOff": "Izklopi naprave. (ne pričakujemo odziva)",
+  "repeater_cliHelpClkReboot": "Ponovno nastavi uro na znano točko in ponovno vklopi naprave.",
+  "repeater_cliHelpAdvertZeroHop": "Pošlje oglas, ki doseže samo neposredne sosede (brez posredovanja).",
+  "repeater_cliHelpStartOta": "Začne nadstrekovno ažuriranje programne opreme na podprtih ploščah.",
+  "repeater_cliHelpTime": "Nastavi časovni ukaz naprave na podano število sekund od Unixovega začetka. Časovni ukaz ne more iti nazaj.",
+  "repeater_cliHelpBoard": "Prikaže proizvajalca plošče / identifikator strojne opreme.",
+  "repeater_cliHelpDiscoverNeighbors": "Pošlje zahtevo za odkrivanje sosednjih naprav. (Samo za repeatere)",
+  "repeater_cliHelpPowersaving": "Prikaže, ali je vklopljen način varčevanja z energijo.",
+  "repeater_cliHelpPowersavingOnOff": "Omogoča ali onemogoča način varčevanja z energijo (če je podprt).",
+  "repeater_cliHelpErase": "(Samo za serijske naprave) Formira datotapno sistemsko okolje. Izbriše vse nastavitve in kontakte.",
+  "repeater_cliHelpSetDutyCycle": "Določi maksimalni dovoljeni čas, ki ga naprave lahko posredujejo, v odstotkih (1-100). Samodejno prilagodi faktor, ki odvisen je od časa, ki ga naprave lahko posredujejo.",
+  "repeater_cliHelpSetPrvKey": "(Samo za serijske naprave) Nadomesti zasebni ključ za identifikacijo naprave. Za uporabo je potrebna ponovna aktivacija. Ustvari nov javni ključ.",
+  "repeater_cliHelpSetRadioRxGain": "(Samo za SX126x) Vklopi povečano občutljivost RX za izboljšano delovanje pri večjih navorih.",
+  "repeater_cliHelpSetOwnerInfo": "Določi niz z informacijami o kontaktni osebi, ki je v oglasih. Za uporabo novih vrstic uporabite '|'.",
+  "repeater_cliHelpSetPathHashMode": "Nastavlja način \"hash poti\". 0 = za stare sisteme, 1 = za standard, 2 = za stroge. Vpliva na to, kako so poti uskladene.",
+  "repeater_cliHelpSetLoopDetect": "Nastavlja občutljivost detekcije ponavljajočih se povezav: izklopljeno, minimalno, umeren, ali strogo.",
+  "repeater_cliHelpSetFreq": "(Samo za serijske naprave) Hitro nastavi samo frekvenco. Potrebna je ponovna aktivacija. Za popolno nastavitev radio parametrov je priporočljivo uporabiti možnost \"nastavitev radia\".",
+  "repeater_cliHelpSetBridgeChannel": "(Samo za most ESPNow) Nastavlja kanal WiFi-ja (1-14), ki ga uporablja most.",
+  "repeater_cliHelpGetName": "Prikaže ime konfigurirane notranje.",
+  "repeater_cliHelpGetRole": "Prikaže vlogo programskega oprema (repeater, strežnik za sobo itd.).",
+  "repeater_cliHelpGetPublicKey": "Prikazuje javni ključ naprave.",
+  "repeater_cliHelpGetPrvKey": "(Samo za serijske naprave) Prikazuje zasebni ključ naprave. Sprejemajte ga kot skrivno informacijo.",
+  "repeater_cliHelpGetRepeat": "Pokaže, ali je omogočeno posredovanje paketov (delovanje kot repetitor).",
+  "repeater_cliHelpGetTx": "Prikazuje trenutno moč TX v dBm.",
+  "repeater_cliHelpGetFreq": "Prikaže nastavljeno frekvenco v MHz.",
+  "repeater_cliHelpGetRadio": "Prikaže vse parametre radija: frekvenco, širino pasu, faktor razširjanja, raven kodiranja.",
+  "repeater_cliHelpGetRadioRxGain": "(Samo za SX126x) Prikazuje stanje povečanega dobiča na RX.",
+  "repeater_cliHelpGetAf": "Prikazuje trenutni faktor, ki določa časovno obdobje.",
+  "repeater_cliHelpGetDutyCycle": "Prikazuje trenutno dovoljeno stopnjo delovanja kot odstotek.",
+  "repeater_cliHelpGetIntThresh": "Prikazuje prag medsebojnega vpliva kanala v dB.",
+  "repeater_cliHelpGetAgcResetInterval": "Prikazuje interval ponovne kalibracije AGC v sekundah.",
+  "repeater_cliHelpGetMultiAcks": "Pokaže, ali je vklopljen način dvojnega potrdila (1) ali je izklopljen (0).",
+  "repeater_cliHelpGetAllowReadOnly": "Pokaže, ali je omogočen le brani dostop za goste.",
+  "repeater_cliHelpGetAdvertInterval": "Prikazuje časovno obdobje lokalne reklame v minutah.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Prikaže časovno obdobje, ko se prikazuje oglas o poplavah, v urah.",
+  "repeater_cliHelpGetGuestPassword": "Prikaže nastavljeno geslo za gostitelja.",
+  "repeater_cliHelpGetLat": "Prikaže določeno zemljepisno širino.",
+  "repeater_cliHelpGetLon": "Prikaže določeno merilo dolžine.",
+  "repeater_cliHelpGetRxDelay": "Prikazuje osnovno vrednost RX odlašanja.",
+  "repeater_cliHelpGetTxDelay": "Prikazuje faktor zamude v načinu delovanja pri plavlju.",
+  "repeater_cliHelpGetDirectTxDelay": "Prikazuje faktor odlašanja signala v režimu neposredne komunikacije.",
+  "repeater_cliHelpGetFloodMax": "Prikazuje največjo število, kolikokrat lahko voda doseže najvišjo višino.",
+  "repeater_cliHelpGetOwnerInfo": "Prikazuje niz z informacijami o lastniku.",
+  "repeater_cliHelpGetPathHashMode": "Prikaže način delovanja z hashjem poti (0/1/2).",
+  "repeater_cliHelpGetLoopDetect": "Prikazuje občutljivost na zaznavanje ciklov.",
+  "repeater_cliHelpGetAcl": "(Samo za serije) Navaja vnos za nadzor dostopa na ponovljalniku.",
+  "repeater_cliHelpGetBridgeEnabled": "Pokaže, ali je most omogočen.",
+  "repeater_cliHelpGetBridgeDelay": "Prikazuje zamik mosta v milisekundah.",
+  "repeater_cliHelpGetBridgeSource": "Pokaže, ali most prenaša pakete RX ali TX.",
+  "repeater_cliHelpGetBridgeBaud": "(Samo za most RS232) Prikazuje hitrost prenosa podatkov na mostu.",
+  "repeater_cliHelpGetBridgeChannel": "(Samo za most ESPNow) Prikazuje kanal WiFi mosta.",
+  "repeater_cliHelpGetBridgeSecret": "(Samo za most ESPNow) Prikazuje tajno, ki jo deli most.",
+  "repeater_cliHelpGetBootloaderVer": "(Samo za NRF52) Prikazuje različico programskega orodja.",
+  "repeater_cliHelpGetAdcMultiplier": "Prikazuje pomnoževalnik ADC (skaliranje napetosti baterije).",
+  "repeater_cliHelpGetPwrMgtSupport": "Navaja, ali ima uprava področje za upravljanje z energijo.",
+  "repeater_cliHelpGetPwrMgtSource": "Prikaže trenutni vir napajanja: zunanji ali baterija.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Prikazuje najnovejšo razlog za ponovno nastavitve in izklop.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Prikazuje napetost baterije v mV ob zagonu.",
+  "repeater_cliHelpSensorGet": "Prebere določeno vrednost senzorja preko tipke.",
+  "repeater_cliHelpSensorSet": "Ustvari prilagojeno nastavitev za senzor.",
+  "repeater_cliHelpSensorList": "Navaja vse nastavitve za uporabniške senzorje, razvrščene po želeni začetni indeksu.",
+  "repeater_cliHelpRegionDefault": "Prikaže trenutno privzeto območje.",
+  "repeater_cliHelpRegionDefaultSet": "Določi privzeto območje. Za izbris uporabite \"<null>\".",
+  "repeater_cliHelpRegionListAllowed": "Navaja regije, ki dovoljujejo promet v času poplav.",
+  "repeater_cliHelpRegionListDenied": "Navaja regije, ki preprečujejo promet zaradi poplav.",
+  "repeater_cliHelpStatsPackets": "(Samo za serijske povezave) Prikazuje statistiko na nivoju paketov.",
+  "repeater_cliHelpStatsRadio": "(Samo za serije) Prikazuje statistične podatke o radiju.",
+  "repeater_cliHelpStatsCore": "(Samo za serijske naprave) Prikazuje osnovne statistične podatke.",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "settings_multiAck": "Več potrdil",
+  "map_sharedAt": "Deljeno",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losBlockedSpotsHint": "Dotaknite blokirano točko, da jo označite na zemljeplati.",
+  "losSelectedObstructionTitle": "Izbrano ovire",
+  "losBlockedSpotsTitle": "Zasedena parkirišča",
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "losSelectedObstructionDetails": "Blocked by {obstruction} {heightUnit}, {distanceFromA} from A and {distanceFromB} from B ({distanceUnit}).",
+  "settings_companionDebugLog": "Log zapis za odpravljanje napak",
+  "chat_markAsUnread": "Označiti kot neneobdelano",
+  "chat_newMessages": "Nove novice",
+  "settings_companionDebugLogSubtitle": "Navodila, odgovori in surova podatka za BLE/TCP/USB.",
+  "repeater_chanUtil": "Uporaba kanala",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "common_undo": "Preobrn",
+  "messageStatus_delivered": "Dostavljeno",
+  "messageStatus_sent": "Pošljeno",
+  "messageStatus_pending": "Pošiljanje",
+  "messageStatus_failed": "Uspešno ni bilo mogo, da se sporočilo pošlje",
+  "messageStatus_repeated": "Slišal sem večkrat",
+  "contacts_moreOptions": "Več možnosti",
+  "contacts_searchOpen": "Iskanje kontaktov",
+  "contacts_searchClose": "Izklopi iskanje",
+  "routing_title": "Navigacija",
+  "routing_modeAuto": "Avto",
+  "routing_modeFlood": "Poplavo",
+  "routing_modeManual": "Navodilo",
+  "routing_modeAutoHint": "Samodejno izbere najbolj poznano pot, in sicer, ko ni na voljo nobena.",
+  "routing_modeFloodHint": "Prenosi preko vseh repetitorjev. Najzanesljivejši način, vendar zahteva več časa.",
+  "routing_modeManualHint": "Vedno sledi natančni poti, ki jo ste določili.",
+  "routing_currentRoute": "Trenutna pot",
+  "routing_directNoHops": "Neposredno – brez prehodov",
+  "routing_noPathYet": "Žep trenutno ni mogoče najti. Naslednje sporočilo bo posredovano, dokler ne bo ugotovljeno, kje je pot.",
+  "routing_floodBroadcast": "Prenos preko vseh repetitiv",
+  "routing_editPath": "Uredi pot",
+  "routing_forgetPath": "Pozabi na pot",
+  "routing_knownPaths": "Poznati poti",
+  "routing_knownPathsHint": "Kliknite na pot, da jo izberete.",
+  "routing_inUse": "V uporabi",
+  "routing_qualityStrong": "Močan prvi korak",
+  "routing_qualityGood": "Prva uspešna faza",
+  "routing_qualityFair": "Prva, uspešna faza",
+  "routing_qualityWorked": "Izpolnil",
+  "routing_qualityFlood": "Slišano preko poplave",
+  "routing_qualityUntested": "Ne preizkušen",
+  "routing_lastWorked": "delal/a {when}",
+  "routing_neverWorked": "nikoli ni bilo potrjeno",
+  "routing_floodDelivery": "Dostava zaradi poplave",
+  "pathEditor_title": "Izgradnja poti",
+  "pathEditor_hopCounter": "{count} od 64 različnih sort hropa",
+  "pathEditor_noHops": "Še niso dodani hmelji. Za dodajanje hmelja v vrstnem redu kliknite na povezavo spodaj, ali pa shranite brez dodanega hmelja, da ga lahko posredujete neposredno.",
+  "pathEditor_addHops": "Dodajte suho travo v skladu s postopkom.",
+  "pathEditor_searchRepeaters": "Iskanje ponovitev",
+  "pathEditor_advancedHex": "Napredno: surovi šestnajstni pot",
+  "pathEditor_hexLabel": "Predfiks za heksadecimalno šifro",
+  "pathEditor_hexHelper": "Dva šestbitna znaka na vsak skok, ločena z vejico",
+  "pathEditor_invalidTokens": "Neveljaven: {tokens}",
+  "pathEditor_tooManyHops": "Največ 64 hopov",
+  "pathEditor_usePath": "Uporabite to poto",
+  "pathEditor_removeHop": "Odstranite hmelj",
+  "pathEditor_unknownHop": "Neznani ponovitelj",
+  "map_zoomIn": "Povečaj",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "map_zoomOut": "Povečajte pogled",
+  "map_centerMap": "Krajšarska karta",
+  "chrome_bluetoothRequiresChromium": "Web Bluetooth zahteva brskalnik Chromium.",
+  "channels_communityShortId": "ID: {id}...",
+  "pathTrace_legendGpsConfirmed": "GPS potrdilo",
+  "pathTrace_legendInferred": "Izpeljana lokacija"
 }

lib/l10n/app_sv.arb

@@ -33,6 +33,8 @@
   "common_remove": "Ta bort",
   "common_enable": "Aktivera",
   "common_disable": "Inaktivera",
+  "common_autoRefresh": "Automatisk uppdatering",
+  "common_interval": "Intervall",
   "common_reboot": "Start om",
   "common_loading": "Laddar...",
   "common_notAvailable": "—",
@@ -52,7 +54,7 @@
       }
     }
   },
-  "scanner_title": "MeshCore Open",
+  "scanner_title": "MeshCore – Öppen version",
   "scanner_scanning": "Söker efter enheter...",
   "scanner_connecting": "Anslutning...",
   "scanner_disconnecting": "Anslutning bryts...",
@@ -104,6 +106,8 @@
   "settings_privacyModeEnabled": "Privatläget är aktiverat",
   "settings_privacyModeDisabled": "Privatläge är avstängt",
   "settings_actions": "Åtgärder",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "Skicka Annons",
   "settings_sendAdvertisementSubtitle": "Sändning finns nu",
   "settings_advertisementSent": "Annons skickad",
@@ -121,7 +125,7 @@
   "settings_appDebugLog": "Appfelsökning",
   "settings_appDebugLogSubtitle": "Applikations felsökningsmeddelanden",
   "settings_about": "Om",
-  "settings_aboutVersion": "MeshCore Open v{version}",
+  "settings_aboutVersion": "MeshCore Open version {version}",
   "@settings_aboutVersion": {
     "placeholders": {
       "version": {
@@ -146,7 +150,7 @@
   "settings_spreadingFactor": "Spreadingfaktor",
   "settings_codingRate": "Kodningsgrad",
   "settings_txPower": "TX-effekt (dBm)",
-  "settings_txPowerHelper": "0 - 22",
+  "settings_txPowerHelper": "0 – 22",
   "settings_txPowerInvalid": "Ogiltig TX-effekt (0-22 dBm)",
   "settings_error": "Fel: {message}",
   "@settings_error": {
@@ -164,19 +168,19 @@
   "appSettings_themeDark": "Mörk",
   "appSettings_language": "Språk",
   "appSettings_languageSystem": "Systemstandard",
-  "appSettings_languageEn": "English",
-  "appSettings_languageFr": "Français",
-  "appSettings_languageEs": "Español",
-  "appSettings_languageDe": "Deutsch",
-  "appSettings_languagePl": "Polski",
-  "appSettings_languageSl": "Slovenščina",
-  "appSettings_languagePt": "Português",
-  "appSettings_languageIt": "Italiano",
-  "appSettings_languageZh": "中文",
+  "appSettings_languageEn": "Engelska",
+  "appSettings_languageFr": "Franska",
+  "appSettings_languageEs": "Spanska",
+  "appSettings_languageDe": "Tyskt",
+  "appSettings_languagePl": "Polsk",
+  "appSettings_languageSl": "Sloveniska",
+  "appSettings_languagePt": "Portugisiska",
+  "appSettings_languageIt": "Italienska",
+  "appSettings_languageZh": "Kinesiska",
   "appSettings_languageSv": "Svenska",
-  "appSettings_languageNl": "Nederlands",
-  "appSettings_languageSk": "Slovenčina",
-  "appSettings_languageBg": "Български",
+  "appSettings_languageNl": "Nederländska",
+  "appSettings_languageSk": "Sloveniska",
+  "appSettings_languageBg": "Bulgariska",
   "appSettings_notifications": "Meddelanden",
   "appSettings_enableNotifications": "Aktivera Notifikationer",
   "appSettings_enableNotificationsSubtitle": "Ta emot notiser för meddelanden och reklam",
@@ -209,9 +213,9 @@
     }
   },
   "appSettings_batteryChemistryConnectFirst": "Anslut till en enhet för att välja",
-  "appSettings_batteryNmc": "18650 NMC (3.0-4.2V)",
+  "appSettings_batteryNmc": "18650 NMC (3,0-4,2V)",
   "appSettings_batteryLifepo4": "LiFePO4 (2,6–3,65V)",
-  "appSettings_batteryLipo": "LiPo (3.0-4.2V)",
+  "appSettings_batteryLipo": "LiPo (3,0-4,2V)",
   "appSettings_mapDisplay": "Kartvisning",
   "appSettings_showRepeaters": "Visa återuppslag",
   "appSettings_showRepeatersSubtitle": "Visa återspelsnoder på kartan",
@@ -285,6 +289,7 @@
   "contacts_newGroup": "Ny grupp",
   "contacts_groupName": "Gruppnamn",
   "contacts_groupNameRequired": "Gruppnamnet är obligatoriskt",
+  "contacts_groupNameReserved": "Detta gruppnamn är reserverat",
   "contacts_groupAlreadyExists": "Gruppen \"{name}\" finns redan.",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -336,11 +341,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "Hashtagkanal",
   "channels_public": "Offentligt",
   "channels_private": "Privat",
-  "channels_publicChannel": "Allmänt kanal",
-  "channels_privateChannel": "Privat kanal",
   "channels_editChannel": "Redigera kanal",
   "channels_muteChannel": "Tysta kanal",
   "channels_unmuteChannel": "Slå på ljud för kanal",
@@ -366,7 +368,7 @@
   "channels_channelName": "Kanalnamn",
   "channels_usePublicChannel": "Använd Publikkanal",
   "channels_standardPublicPsk": "Standard allmän PSK",
-  "channels_pskHex": "PSK (Hex)",
+  "channels_pskHex": "PSK (heks)",
   "channels_generateRandomPsk": "Generera slumpmässig PSK",
   "channels_enterChannelName": "Ange en kanalnamn",
   "channels_pskMustBe32Hex": "PSK måste vara 32 hexadecimala tecken",
@@ -387,6 +389,22 @@
     }
   },
   "channels_smazCompression": "SMAZ-komprimering",
+  "channels_cyr2latCompression": "Cyr2Lat-komprimering",
+  "channels_cyr2latCompressionDscr": "Ersätter vissa kyrilliska tecken med latinska tecken när du skickar.",
+  "channels_cyr2latSettingsHeading": "Inställningar för Cyr2Lat",
+  "channels_cyr2latSettingsSubheading": "Ersättningslista",
+  "channels_cyr2latSettingsDscr": "Redigera JSON-konfigurationen för teckenersättning",
+  "channels_cyr2latSettingsDialogHint": "JSON-ersättningskarta",
+  "channels_cyr2latSettingsDialogWrongJSON": "Felaktig JSON: {error}",
+  "settings_cyr2latProfileAdd": "Lägg till Cyr2Lat-profil",
+  "settings_cyr2latProfileName": "Profilnamn",
+  "settings_cyr2latProfileNameEmpty": "Profilnamnet får inte vara tomt",
+  "settings_cyr2latProfileAdded": "Profilen har lagts till",
+  "settings_cyr2latProfileUpdated": "Profilen har uppdaterats",
+  "settings_cyr2latProfileEdit": "Redigera Cyr2Lat-profil",
+  "settings_cyr2latProfileDelete": "Ta bort Cyr2Lat-profil",
+  "settings_cyr2latProfileDeleted": "Profilen har tagits bort",
+  "settings_cyr2latProfileDeleteDscr": "Är du säker på att du vill ta bort profilen \"{name}\"?",
   "channels_channelUpdated": "Kanalen \"{name}\" har uppdaterats",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -530,7 +548,7 @@
       }
     }
   },
-  "debugFrame_textTypeCli": "CLI",
+  "debugFrame_textTypeCli": "Kommandorad",
   "debugFrame_textTypePlain": "Enkel",
   "debugFrame_text": "- Text: \"{text}\"",
   "@debugFrame_text": {
@@ -549,7 +567,7 @@
   "chat_pathHistoryFull": "Historisk sökväg är full. Ta bort poster för att lägga till nya.",
   "chat_hopSingular": "hoppa",
   "chat_hopPlural": "hoppar",
-  "chat_hopsCount": "{count} {count, plural, =1{hop} other{hops}}",
+  "chat_hopsCount": "{count} {count, plural, =1{hopp} other{hopp} }",
   "@chat_hopsCount": {
     "placeholders": {
       "count": {
@@ -880,9 +898,9 @@
   "repeater_managementTools": "Administrationsverktyg",
   "repeater_status": "Status",
   "repeater_statusSubtitle": "Visa återspolningsstatus, statistik och grannar",
-  "repeater_telemetry": "Telemetry",
+  "repeater_telemetry": "Telemetri",
   "repeater_telemetrySubtitle": "Visa telemetri för sensorer och systemstatistik",
-  "repeater_cli": "CLI",
+  "repeater_cli": "Kommandoradgränssnitt",
   "repeater_cliSubtitle": "Skicka kommandon till repetitorn",
   "repeater_settings": "Inställningar",
   "repeater_settingsSubtitle": "Konfigurera återspolarparametrar",
@@ -991,7 +1009,7 @@
   "repeater_guestPasswordHelper": "Läs-skyddspassord",
   "repeater_radioSettings": "Radioinställningar",
   "repeater_frequencyMhz": "Frekvens (MHz)",
-  "repeater_frequencyHelper": "300-2500 MHz",
+  "repeater_frequencyHelper": "300–2500 MHz",
   "repeater_txPower": "TX Effekt",
   "repeater_txPowerHelper": "1-30 dBm",
   "repeater_bandwidth": "Bandbredd",
@@ -1058,6 +1076,81 @@
   },
   "repeater_confirm": "Bekräfta",
   "repeater_settingsSaved": "Inställningarna sparades framgångsrikt.",
+  "repeater_rxGain": "Ökad RX-vinst",
+  "repeater_rxGainHelper": "Ökad känslighet, högre strömförbrukning (endast för SX1262/SX1268)",
+  "repeater_refreshRxGain": "Återställ förbättrad RX-signalstyrka",
+  "repeater_multiAcks": "Flera bekräftelser",
+  "repeater_multiAcksSubtitle": "Bekräfta meddelanden via flera olika kanaler för bättre leverans.",
+  "repeater_refreshMultiAcks": "Återställ flera ACK-meddelanden",
+  "repeater_networkHealth": "Nätverkets hälsa",
+  "repeater_loopDetect": "Identifiering av loopar",
+  "repeater_loopDetectHelper": "Skapa \"flödespaket\" som ser ut som att de bildar en loop (en återkommande krets).",
+  "repeater_loopDetectOff": "Av",
+  "repeater_loopDetectMinimal": "Minimal",
+  "repeater_loopDetectModerate": "Måttlig",
+  "repeater_loopDetectStrict": "Strikt",
+  "repeater_dutyCycle": "Arbetscykel",
+  "repeater_dutyCycleHelper": "Maximal procentandel av sändningstid",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "Information om operatören",
+  "repeater_ownerInfoHelper": "Offentliga metadata för denna sändare",
+  "repeater_refreshOwnerInfo": "Uppdatera information om personal",
+  "repeater_floodMax": "Maximala mängden humle",
+  "repeater_floodMaxHelper": "Maximalt antal hopp en paket kan färdas (0-64)",
+  "repeater_advancedSettings": "Avancerad",
+  "repeater_advancedSettingsSubtitle": "Ställjusteringsknappar för erfarna användare",
+  "repeater_pathHashMode": "Hash-läge för sökväg",
+  "repeater_pathHashModeHelper": "Byte används för att koda denna repeaters ID i taggar för att upptäcka loopar/flödesvägar. 0=1 byte (256 ID:n, upp till 64 hopp), 1=2 byte (65 000 ID:n, upp till 32 hopp), 2=3 byte (16 miljoner ID:n, upp till 21 hopp). Versioner 1.13 och äldre har stöd för multi-byte-vägar – endast en gång när nätverket är aktiverat (från och med version 1.14).",
+  "repeater_txDelay": "Försening i Flood TX",
+  "repeater_txDelayHelper": "Återöverföringsintervall för trafik under perioder med hög belastning, som en multiplikator av paketets överföringstid (0-2, standard 0,5). Högre värde = färre kollisioner, men långsammare leverans.",
+  "repeater_directTxDelay": "Direkt TX-fördröjning",
+  "repeater_directTxDelayHelper": "Återöverföringsintervall för direkt (icke-översvämmande) trafik, som en multiplikator av paketets överföringstid (0-2, standard 0,3).",
+  "repeater_intThresh": "Tröskelvärde för störning",
+  "repeater_intThreshHelper": "Tröskelvärdet har ställts in så att den filtrerar bort störningar som överstiger detta värde. 0 stänger av – aktivera endast om du ser RX-fel i ett störningsfyllt frekvensområde.",
+  "repeater_agcResetInterval": "Återställningsintervall för AGC",
+  "repeater_agcResetIntervalHelper": "Hur ofta ska man återställa radioens automatiska förstärkning för att återhämta sig från ett tillstånd där förstärkningen är fast? Sekunder, inställda till en multipel av 4. 0 stänger av periodiska återställningar.",
+  "repeater_actionsTitle": "Åtgärder",
+  "repeater_sendAdvert": "Skicka annons om översvämning",
+  "repeater_sendAdvertSubtitle": "Sänd en reklamfilm om översvämningar via nätverket.",
+  "repeater_sendAdvertZeroHop": "Skicka en annons som inte kräver någon mellanstopp",
+  "repeater_sendAdvertZeroHopSubtitle": "Sänd en reklamkampanj med en enda sändare (utan mellanliggande sändare).",
+  "repeater_clockSync": "Synkronisera klockan nu",
+  "repeater_clockSyncSubtitle": "Ställ din telefons tid till repeatern.",
+  "repeater_actionSucceeded": "{action} lyckades",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} misslyckades: {error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "Inställningar sparade – starta om repetern för att tillämpa dem",
+  "repeater_settingsPartialFailure": "Vissa inställningar misslyckades: {failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "Fel vid sparande av inställningar: {error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1069,11 +1162,9 @@
   "repeater_refreshBasicSettings": "Återställ Grundläggande Inställningar",
   "repeater_refreshRadioSettings": "Återställ Radiosinställningar",
   "repeater_refreshTxPower": "Återställ TX-effekt",
-  "repeater_refreshLocationSettings": "Uppdatera Lokationsinställningar",
   "repeater_refreshPacketForwarding": "Återställ Paketväxling",
   "repeater_refreshGuestAccess": "Återställ Gäståtkomst",
   "repeater_refreshPrivacyMode": "Återställ Sekretessläge",
-  "repeater_refreshAdvertisementSettings": "Återställ Annonsinställningar",
   "repeater_refreshed": "{label} har uppdaterats",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1191,6 +1282,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "Digital ingång",
+  "telemetry_digitalOutputLabel": "Digital utgång",
+  "telemetry_analogInputLabel": "Analog ingång",
+  "telemetry_analogOutputLabel": "Analog utgång",
+  "telemetry_genericLabel": "Allmän sensor",
+  "telemetry_luminosityLabel": "Ljusstyrka",
+  "telemetry_presenceLabel": "Närvaro",
+  "telemetry_humidityLabel": "Luftfuktighet",
+  "telemetry_accelerometerLabel": "Accelerometer",
+  "telemetry_pressureLabel": "Tryck",
+  "telemetry_altitudeLabel": "Höjd",
+  "telemetry_frequencyLabel": "Frekvens",
+  "telemetry_percentageLabel": "Procent",
+  "telemetry_concentrationLabel": "Koncentration",
+  "telemetry_powerLabel": "Effekt",
+  "telemetry_distanceLabel": "Avstånd",
+  "telemetry_energyLabel": "Energi",
+  "telemetry_directionLabel": "Riktning",
+  "telemetry_timeLabel": "Tid",
+  "telemetry_gyrometerLabel": "Gyrometer",
+  "telemetry_colourLabel": "Färg",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "Brytare",
+  "telemetry_polylineLabel": "Polylinje",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "Antal förfrågningar",
+  "telemetry_error": "Det gick inte att hämta data",
   "telemetry_noData": "Inga telemetridata tillgängliga.",
   "telemetry_channelTitle": "Kanal {channel}",
   "@telemetry_channelTitle": {
@@ -1476,7 +1604,7 @@
   "community_qrTitle": "Dela Gemenskap",
   "community_qrInstructions": "Skanna denna QR-kod för att gå med i \"{name}\"",
   "community_hashtagPrivacyHint": "Community-hashtagkanaler kan endast nås av medlemmar i communityn",
-  "community_hashtagChannel": "Community Hashtag",
+  "community_hashtagChannel": "Hashtag för gemenskapen",
   "community_invalidQrCode": "Ogiltig community QR-kod",
   "community_alreadyMember": "Är redan medlem",
   "community_alreadyMemberMessage": "Du är redan medlem av \"{name}\".",
@@ -1503,7 +1631,7 @@
   "community_regularHashtagDesc": "Offentlig hashtag (alla kan gå med)",
   "community_communityHashtagDesc": "Endast för medlemmar",
   "community_forCommunity": "För {name}",
-  "community_communityHashtag": "Community Hashtag",
+  "community_communityHashtag": "Gemenskaps-hashtag",
   "@community_regenerateSecretConfirm": {
     "placeholders": {
       "name": {
@@ -1550,7 +1678,7 @@
   "pathTrace_failed": "Sökvägsföljning misslyckades.",
   "pathTrace_notAvailable": "Path trace ej tillgänglig.",
   "pathTrace_refreshTooltip": "Uppdatera Path Trace",
-  "contacts_pathTrace": "Path Trace",
+  "contacts_pathTrace": "Spårning",
   "contacts_ping": "Ping",
   "contacts_repeaterPathTrace": "Vägspårning till repeater",
   "contacts_repeaterPing": "Ping-repeater",
@@ -1878,7 +2006,7 @@
   "tcpHostLabel": "IP-adress",
   "tcpScreenTitle": "Anslut via TCP",
   "connectionChoiceTcpLabel": "TCP",
-  "tcpPortLabel": "Port",
+  "tcpPortLabel": "Hamn",
   "tcpPortHint": "5000",
   "tcpStatus_notConnected": "Ange slutpunkt och anslut",
   "tcpStatus_connectingTo": "Anslutning till {endpoint}...",
@@ -1888,5 +2016,435 @@
   "tcpErrorTimedOut": "TCP-anslutningen har tidsut gått.",
   "tcpConnectionFailed": "Fel vid TCP-anslutning: {error}",
   "map_showDiscoveryContacts": "Visa Discovery-kontakter",
-  "map_setAsMyLocation": "Ange som min plats"
+  "map_setAsMyLocation": "Ange som min plats",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_privacy": "Inställningar för sekretess",
+  "settings_allowAll": "Tillåt alla",
+  "settings_privacySubtitle": "Kontrollera vilken information som delas.",
+  "settings_telemetryEnvironmentMode": "Telemetri miljöläge",
+  "settings_telemetryBaseMode": "Telemetribasläge",
+  "settings_telemetryLocationMode": "Telemetritillstånd för plats",
+  "settings_advertLocation": "Annonsplacering",
+  "contact_info": "Kontaktinformation",
+  "contact_settings": "Kontaktinställningar",
+  "contact_telemetry": "Telemetri",
+  "settings_denyAll": "Neka alla",
+  "settings_allowByContact": "Tillåt via kontaktflaggor",
+  "settings_privacySettingsDescription": "Välj vilken information din enhet delar med andra.",
+  "contact_lastSeen": "Senast sedd",
+  "contact_clearChat": "Rensa Chatt",
+  "contact_teleEnv": "Telemetri Miljö",
+  "settings_advertLocationSubtitle": "Inkludera plats i annonsen",
+  "contact_teleEnvSubtitle": "Tillåt delning av miljösensordata",
+  "contact_teleBase": "Telemetribas",
+  "contact_teleBaseSubtitle": "Tillåt delning av batterinivå och grundläggande telemetri",
+  "contact_teleLoc": "Telemetridata plats",
+  "contact_teleLocSubtitle": "Tillåt delning av platsdata",
+  "appSettings_initialRouteWeightSubtitle": "Initial vikt för nyligen upptäckta vägar",
+  "appSettings_maxRouteWeight": "Maximalt tillåtet vikt för rutten",
+  "appSettings_maxRouteWeightSubtitle": "Maximal vikt som en leveransväg kan ackumulera från framgångsrika leveranser.",
+  "appSettings_initialRouteWeight": "Initial vikt för rutt",
+  "appSettings_routeWeightSuccessIncrement": "Ökning av vikt för framgång",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "Vikt läggs till en väg efter en lyckad leverans.",
+  "appSettings_routeWeightFailureDecrement": "Minskning av vikten för misslyckande",
+  "appSettings_routeWeightFailureDecrementSubtitle": "Vikt som tagits bort från en väg efter ett misslyckat leveransförsök",
+  "appSettings_maxMessageRetries": "Maximalt antal försök",
+  "appSettings_maxMessageRetriesSubtitle": "Antal försök att skicka om ett meddelande innan det markeras som misslyckat.",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_telemetryModeUpdated": "Telemetri-läge uppdaterat",
+  "settings_multiAck": "Flera bekräftelser",
+  "map_showOverlaps": "Repeater-nyckelöverlappningar",
+  "map_runTraceWithReturnPath": "Gå tillbaka på samma väg",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "appSettings_jumpToOldestUnreadSubtitle": "När du öppnar en chatt med oinlästa meddelanden, scrolla till det första oinlästa meddelandet istället för det senaste.",
+  "chat_sendCooldown": "Vänligen vänta en stund innan du skickar igen.",
+  "appSettings_jumpToOldestUnread": "Gå direkt till det äldsta, obesvarade meddelandet",
+  "appSettings_languageHu": "Ungerskt",
+  "appSettings_languageJa": "Japanska",
+  "appSettings_languageKo": "Koreanska",
+  "radioStats_tooltip": "Radio- och mesh-statistik",
+  "radioStats_screenTitle": "Radiostation",
+  "radioStats_notConnected": "Anslut till en enhet för att visa radiostatistik.",
+  "radioStats_firmwareTooOld": "Radio statistik kräver kompatibel firmware version 8 eller senare.",
+  "radioStats_waiting": "Väntar på data…",
+  "radioStats_noiseFloor": "Bakgrundsnivå: {noiseDbm} dBm",
+  "radioStats_lastRssi": "Senaste RSSI-värde: {rssiDbm} dBm",
+  "radioStats_lastSnr": "Senaste SNR: {snr} dB",
+  "radioStats_txAir": "TX-tid (total): {seconds} sekunder",
+  "radioStats_rxAir": "RX-tid (total): {seconds} s",
+  "radioStats_chartCaption": "Ljudnivå (dBm) baserat på de senaste mätningarna.",
+  "radioStats_stripNoise": "Bakgrundsnivå: {noiseDbm} dBm",
+  "radioStats_stripWaiting": "Hämtar radiostatistik…",
+  "radioStats_settingsTile": "Radiostation",
+  "radioStats_settingsSubtitle": "Bakgrundsnivå, RSSI, SNR och tillgänglig tid",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_enableSubtitle": "Översätt inkommande meddelanden och möjliggör översättning före avsändning.",
+  "translation_enableTitle": "Aktivera översättning",
+  "translation_title": "Översättning",
+  "translation_composerTitle": "Översätt innan du skickar",
+  "translation_composerSubtitle": "Styr standardtillståndet för kompositorns översättningsikon.",
+  "translation_autoIncomingTitle": "Översätt meddelanden automatiskt",
+  "translation_autoIncomingSubtitle": "Översätter meddelanden automatiskt för aviseringar och för chattar eller kanaler.",
+  "translation_translateMessage": "Översätt meddelande",
+  "translation_targetLanguage": "Målmedvetet språk",
+  "translation_useAppLanguage": "Använd appens språk",
+  "translation_downloadedModelLabel": "Nedladdad modell",
+  "translation_presetModelLabel": "Fördefinierat Hugging Face-modell",
+  "translation_manualUrlLabel": "Manualens URL",
+  "translation_downloadModel": "Ladda ner modellen",
+  "translation_downloading": "Nedladdning...",
+  "translation_working": "Arbeta...",
+  "translation_stop": "Stopp",
+  "translation_mergingChunks": "Slå samman de nedladdade delarna till en slutlig fil...",
+  "translation_downloadedModels": "Nedladdade modeller",
+  "translation_deleteModel": "Ta bort modell",
+  "translation_modelDownloaded": "Översättningsmodellen har laddats ner.",
+  "translation_downloadStopped": "Nedladdningen avbruten.",
+  "translation_downloadFailed": "Nedladdning misslyckades: {error}",
+  "translation_enterUrlFirst": "Ange först en URL för en specifik modell.",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerDisabledHint": "Skicka meddelanden på det ursprungliga, stavade språket.",
+  "translation_translateBeforeSending": "Översätt innan du skickar",
+  "translation_composerEnabledHint": "Meddelandena kommer att översättas innan de skickas.",
+  "translation_messageTranslation": "Meddelandets översättning",
+  "translation_translateTo": "Översätt till {language}",
+  "translation_translationOptions": "Översättningsalternativ",
+  "translation_systemLanguage": "Språk för systemet",
+  "scanner_linuxPairingShowPin": "Visa PIN",
+  "scanner_linuxPairingPinTitle": "Bluetooth‑parnings‑PIN",
+  "scanner_linuxPairingPinPrompt": "Ange PIN för {deviceName} (lämna tomt om ingen).",
+  "scanner_linuxPairingHidePin": "Dölj PIN",
+  "repeater_cliQuickDiscovery": "Upptäck grannar",
+  "repeater_cliQuickClockSync": "Synkronisera klocka",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLoginSubtitle": "Automatiskt skicka \"klocksynkronisering\" efter en lyckad inloggning.",
+  "repeater_clockSyncAfterLogin": "Synkronisera klockan efter inloggning",
+  "repeater_guest": "Information om repetorer",
+  "chat_sendMessage": "Skicka meddelande",
+  "repeater_guestTools": "Gästverktyg",
+  "room_guest": "Information om servern",
+  "repeater_getCategory": "Hämta värden",
+  "repeater_powerMgmt": "Effektstyrning",
+  "repeater_sensors": "Sensorer",
+  "repeater_cliHelpPowerOff": "Stänger av enheten. (ingen respons förväntas)",
+  "repeater_cliHelpClkReboot": "Återställer klockan till en känd tidpunkt och startar om enheten.",
+  "repeater_cliHelpAdvertZeroHop": "Skickar en annons som når endast direkt grannar (endast närmaste grannar).",
+  "repeater_cliHelpStartOta": "Startar en firmware-uppdatering via luft, på kompatibla enheter.",
+  "repeater_cliHelpTime": "Ställer enheten till den angivna Unix-epokens tid. Klockan kan inte gå bakåt.",
+  "repeater_cliHelpBoard": "Visar tillverkaren av moderkortet / hårdvaru-identifieraren.",
+  "repeater_cliHelpDiscoverNeighbors": "Skickar en förfrågan om att upptäcka närliggande noder. (Endast för repetrar)",
+  "repeater_cliHelpPowersaving": "Visar om energisparläget är aktiverat eller avstängt.",
+  "repeater_cliHelpPowersavingOnOff": "Aktiverar eller inaktiverar energisparläget (om det stöds).",
+  "repeater_cliHelpErase": "(Endast för seriell kommunikation) Formaterar enhetens filsystem. Raderar alla inställningar och kontakter.",
+  "repeater_cliHelpSetDutyCycle": "Anger den maximala tillåtna överföringsfrekvensen som en procent (1-100). Justerar automatiskt tidsfaktorn.",
+  "repeater_cliHelpSetPrvKey": "(Endast för seriell användning) Ersätter enhetsens privata nyckel. Återstart krävs för att tillämpa. Genererar en ny publik nyckel.",
+  "repeater_cliHelpSetRadioRxGain": "(Endast SX126x) Aktiverar förstärkt mottagargain för förbättrad känslighet vid högre strömförbrukning.",
+  "repeater_cliHelpSetOwnerInfo": "Anger kontaktinformationen som ska inkluderas i annonserna. Använd '|' för att separera olika fält.",
+  "repeater_cliHelpSetPathHashMode": "Definierar läget för hash-baserad ruttning. 0 = äldre läge, 1 = standard, 2 = strikt. Påverkar hur ruttvägar matchas.",
+  "repeater_cliHelpSetLoopDetect": "Ställer in känsligheten för att detektera loopar i routningen: av, minimal, måttlig eller strikt.",
+  "repeater_cliHelpSetFreq": "(Endast för seriell kommunikation) Ställer snabbt bara frekvensen. Kräver omstart. Föredrar \"ställ radio\" för att få full kontroll över radioinställningarna.",
+  "repeater_cliHelpSetBridgeChannel": "(Endast ESPNow-brygga) Anger WiFi-kanalen (1-14) som används av bryggan.",
+  "repeater_cliHelpGetName": "Visar det konfigurerade nodnamnet.",
+  "repeater_cliHelpGetRole": "Visar firmware-funktionen (Repeater, Room Server, etc.).",
+  "repeater_cliHelpGetPublicKey": "Visar enhetens publika nyckel.",
+  "repeater_cliHelpGetPrvKey": "(Endast för seriell användning) Visar enheters privata nyckel. Behandla detta som en hemlighet.",
+  "repeater_cliHelpGetRepeat": "Visar om funktionen för att vidarebefordra paket (som en repeater) är aktiverad eller inaktiverad.",
+  "repeater_cliHelpGetTx": "Visar aktuell TX-effekt i dBm.",
+  "repeater_cliHelpGetFreq": "Visar den konfigurerade radiovågen i MHz.",
+  "repeater_cliHelpGetRadio": "Visar alla radioparametrar: frekvens, bandbredd, spridningsfaktor, kodningshastighet.",
+  "repeater_cliHelpGetRadioRxGain": "(Endast för SX126x) Visar RX:s förstärkningstillstånd.",
+  "repeater_cliHelpGetAf": "Visar aktuell tidssats.",
+  "repeater_cliHelpGetDutyCycle": "Visar den aktuella tillåtna arbetscykeln i procent.",
+  "repeater_cliHelpGetIntThresh": "Visar gränsen för kanalinterferens i dB.",
+  "repeater_cliHelpGetAgcResetInterval": "Visar återställningsintervallet för AGC i sekunder.",
+  "repeater_cliHelpGetMultiAcks": "Visar om dubbelbekräftelseläget är aktiverat (1) eller avstängt (0).",
+  "repeater_cliHelpGetAllowReadOnly": "Visar om gäst har tillåtelse att endast läsa.",
+  "repeater_cliHelpGetAdvertInterval": "Visar den lokala reklampausens längd i minuter.",
+  "repeater_cliHelpGetFloodAdvertInterval": "Visar tidsintervallet för reklamsegmentet under översvämningen, i timmar.",
+  "repeater_cliHelpGetGuestPassword": "Visar det angivna gästlösen.",
+  "repeater_cliHelpGetLat": "Visar den angivna latituden.",
+  "repeater_cliHelpGetLon": "Visar den angivna longituden.",
+  "repeater_cliHelpGetRxDelay": "Visar grundvärdet för rxdelay.",
+  "repeater_cliHelpGetTxDelay": "Visar faktor för fördröjning i flödesläge.",
+  "repeater_cliHelpGetDirectTxDelay": "Visar faktorn för fördröjning i direktläge.",
+  "repeater_cliHelpGetFloodMax": "Visar det maximala antalet gånger en översvämning har inträffat.",
+  "repeater_cliHelpGetOwnerInfo": "Visar strängen med kontaktinformation för ägaren.",
+  "repeater_cliHelpGetPathHashMode": "Visar hash-läge (0/1/2).",
+  "repeater_cliHelpGetLoopDetect": "Visar känsligheten för att detektera loopar.",
+  "repeater_cliHelpGetAcl": "(Endast för serier) Visar åtkomstkontrollinställningarna för en repeater.",
+  "repeater_cliHelpGetBridgeEnabled": "Visar om bron är aktiverad.",
+  "repeater_cliHelpGetBridgeDelay": "Visar fördröjningen i bron i millisekunder.",
+  "repeater_cliHelpGetBridgeSource": "Visar om bron skickar RX- eller TX-paket.",
+  "repeater_cliHelpGetBridgeBaud": "(Enbart RS232-brygga) Visar bryggans baud-hastighet.",
+  "repeater_cliHelpGetBridgeChannel": "(Endast ESPNow-brygga) Visar WiFi-kanal för bryggan.",
+  "repeater_cliHelpGetBridgeSecret": "(Endast ESPNow-brygga) Visar bryggans delade hemlighet.",
+  "repeater_cliHelpGetBootloaderVer": "(Endast för NRF52) Visar versionen av bootloadern.",
+  "repeater_cliHelpGetAdcMultiplier": "Visar ADC-multiplikatorn (skalning av batterispänning).",
+  "repeater_cliHelpGetPwrMgtSupport": "Anger om styrelsen har stöd för energihantering.",
+  "repeater_cliHelpGetPwrMgtSource": "Visar aktuell strömkälla: extern eller batteri.",
+  "repeater_cliHelpGetPwrMgtBootReason": "Visar de senaste orsakerna till återställning och avstängning.",
+  "repeater_cliHelpGetPwrMgtBootMv": "Visar batterispänningen vid start i millivolt (mV).",
+  "repeater_cliHelpSensorGet": "Läser en anpassad sensorinställning via tangentbordet.",
+  "repeater_cliHelpSensorSet": "Skapar en anpassad inställning för en sensor.",
+  "repeater_cliHelpSensorList": "Visar alla anpassade sensorinställningar, sorterade från ett valfritt startindex.",
+  "repeater_cliHelpRegionDefault": "Visar det aktuella standardområde.",
+  "repeater_cliHelpRegionDefaultSet": "Definierar standardområde. Använd \"<null>\" för att återställa till standard.",
+  "repeater_cliHelpRegionListAllowed": "Lista områden där det är tillåtet med trafik under översvämningsförhållanden.",
+  "repeater_cliHelpRegionListDenied": "Listar områden där trafik på grund av översvämningar är förbjuden.",
+  "repeater_cliHelpStatsPackets": "(Endast för seriell kommunikation) Visar statistik på paketnivå.",
+  "repeater_cliHelpStatsRadio": "(Enbart för serier) Visar radiostatistik.",
+  "repeater_cliHelpStatsCore": "(Enbart för seriell kommunikation) Visar grundläggande firmware-statistik.",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "map_sharedAt": "Delad",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "losBlockedSpotsTitle": "Reserverade platser",
+  "losSelectedObstructionTitle": "Vald hinder",
+  "losBlockedSpotsHint": "Klicka på en markerad plats för att framhäva den på kartan.",
+  "losSelectedObstructionDetails": "Blocked by {obstruction} {heightUnit}, {distanceFromA} from A and {distanceFromB} from B ({distanceUnit}).",
+  "chat_markAsUnread": "Markera som oläst",
+  "settings_companionDebugLog": "Följande felsökningslogg",
+  "chat_newMessages": "Nya meddelanden",
+  "settings_companionDebugLogSubtitle": "BLE/TCP/USB-kommandon, svar och rådata",
+  "repeater_chanUtil": "Användning av kanal",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "messageStatus_sent": "Sen",
+  "messageStatus_delivered": "Levererad",
+  "common_undo": "Ångra",
+  "messageStatus_pending": "Skicka",
+  "messageStatus_failed": "Misslyckades med att skicka",
+  "messageStatus_repeated": "Hördes upprepade gånger",
+  "contacts_moreOptions": "Fler alternativ",
+  "contacts_searchOpen": "Sök efter kontakter",
+  "contacts_searchClose": "Avancerad sökning",
+  "routing_title": "Ruttplanering",
+  "routing_modeAuto": "Bil",
+  "routing_modeFlood": "Översvämning",
+  "routing_modeManual": "Instruktioner",
+  "routing_modeAutoHint": "Väljer automatiskt den bästa kända vägen, och använder en \"flooding\"-strategi om ingen väg är känd.",
+  "routing_modeFloodHint": "Sändningar via alla repetrar. Det mest pålitliga alternativet, men kräver mer sändtid.",
+  "routing_modeManualHint": "Skickar alltid den exakta väg du har angivit.",
+  "routing_currentRoute": "Nuvarande rutt",
+  "routing_directNoHops": "Direkt – utan mellanliggande routrar",
+  "routing_noPathYet": "Ingen väg hittad ännu. Nästa meddelande skickas tills en rutt har upptäckts.",
+  "routing_floodBroadcast": "Sändas via alla repetrar",
+  "routing_editPath": "Redigera sökväg",
+  "routing_forgetPath": "Glöm vägen",
+  "routing_knownPaths": "Kända vägar",
+  "routing_knownPathsHint": "Välj en väg för att byta till den.",
+  "routing_inUse": "I användning",
+  "routing_qualityStrong": "En stark start",
+  "routing_qualityGood": "Bra första steg",
+  "routing_qualityFair": "Bra första hopp",
+  "routing_qualityWorked": "Har levererat",
+  "routing_qualityFlood": "Fått information via nyhetsflöde",
+  "routing_qualityUntested": "Ej testat",
+  "routing_lastWorked": "arbetade {when}",
+  "routing_neverWorked": "aldrig bekräftat",
+  "routing_floodDelivery": "Leverans vid översvämningsområde",
+  "pathEditor_title": "Skapa väg",
+  "pathEditor_hopCounter": "{count} av 64 humlor",
+  "pathEditor_noHops": "Inga humle än. Använd knapparna nedan för att lägga till dem i rätt ordning, eller spara utan humle för att skicka direkt.",
+  "pathEditor_addHops": "Tillsätt humlen i rätt ordning.",
+  "pathEditor_searchRepeaters": "Sök efter återupptagna samtal",
+  "pathEditor_advancedHex": "Avancerat: rå hex-sökväg",
+  "pathEditor_hexLabel": "Hex-prefikser",
+  "pathEditor_hexHelper": "Två hex-tecken per steg, separerade med kommatecken.",
+  "pathEditor_invalidTokens": "Ogiltigt: {tokens}",
+  "pathEditor_tooManyHops": "Maximalt 64 humlörter",
+  "pathEditor_usePath": "Använd denna väg",
+  "pathEditor_removeHop": "Ta bort humlen",
+  "pathEditor_unknownHop": "Okänd förstärkare",
+  "map_zoomIn": "Zooma in",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "map_zoomOut": "Zooma ut",
+  "map_centerMap": "Kartöversikt",
+  "chrome_bluetoothRequiresChromium": "Web Bluetooth kräver en Chromium-baserad webbläsare.",
+  "channels_communityShortId": "ID: {id}...",
+  "pathTrace_legendGpsConfirmed": "GPS-verifierat",
+  "pathTrace_legendInferred": "Antagen position"
 }

lib/l10n/app_zh.arb

@@ -34,6 +34,8 @@
   "common_remove": "移除",
   "common_enable": "启用",
   "common_disable": "禁用",
+  "common_autoRefresh": "自动刷新",
+  "common_interval": "间隔",
   "common_reboot": "重启",
   "common_loading": "正在加载...",
   "common_notAvailable": "—",
@@ -79,7 +81,7 @@
   "scanner_stop": "停止",
   "scanner_scan": "扫描",
   "device_quickSwitch": "快速切换",
-  "device_meshcore": "MeshCore",
+  "device_meshcore": "网格核心",
   "settings_title": "设置",
   "settings_deviceInfo": "设备信息",
   "settings_appSettings": "应用设置",
@@ -109,6 +111,8 @@
   "settings_privacyModeEnabled": "隐私模式已启用",
   "settings_privacyModeDisabled": "隐私模式已关闭",
   "settings_actions": "操作",
+  "settings_deleteAllPaths": "Delete All Paths",
+  "settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
   "settings_sendAdvertisement": "发送广播",
   "settings_sendAdvertisementSubtitle": "立即发送广播",
   "settings_advertisementSent": "已发送广播",
@@ -300,6 +304,7 @@
   "contacts_newGroup": "新建群聊",
   "contacts_groupName": "群聊名称",
   "contacts_groupNameRequired": "请输入群聊名称",
+  "contacts_groupNameReserved": "该群组名称已被保留",
   "contacts_groupAlreadyExists": "名为 \"{name}\" 的群聊已存在",
   "@contacts_groupAlreadyExists": {
     "placeholders": {
@@ -351,11 +356,8 @@
       }
     }
   },
-  "channels_hashtagChannel": "标签频道",
   "channels_public": "公共",
   "channels_private": "私有",
-  "channels_publicChannel": "公共频道",
-  "channels_privateChannel": "私有频道",
   "channels_editChannel": "编辑频道",
   "channels_muteChannel": "静音频道",
   "channels_unmuteChannel": "取消静音频道",
@@ -402,6 +404,22 @@
     }
   },
   "channels_smazCompression": "SMAZ 压缩",
+  "channels_cyr2latCompression": "Cyr2Lat 压缩",
+  "channels_cyr2latCompressionDscr": "发送时将一些西里尔字符替换为拉丁字符。",
+  "channels_cyr2latSettingsHeading": "Cyr2Lat 設定",
+  "channels_cyr2latSettingsSubheading": "替換清單",
+  "channels_cyr2latSettingsDscr": "編輯 JSON 字元替換設定檔",
+  "channels_cyr2latSettingsDialogHint": "JSON 替換映射表",
+  "channels_cyr2latSettingsDialogWrongJSON": "JSON 格式錯誤：{error}",
+  "settings_cyr2latProfileAdd": "新增 Cyr2Lat 設定檔",
+  "settings_cyr2latProfileName": "設定檔名稱",
+  "settings_cyr2latProfileNameEmpty": "設定檔名稱不能為空",
+  "settings_cyr2latProfileAdded": "設定檔已成功新增",
+  "settings_cyr2latProfileUpdated": "設定檔已成功更新",
+  "settings_cyr2latProfileEdit": "編輯 Cyr2Lat 設定檔",
+  "settings_cyr2latProfileDelete": "刪除 Cyr2Lat 設定檔",
+  "settings_cyr2latProfileDeleted": "設定檔已成功刪除",
+  "settings_cyr2latProfileDeleteDscr": "您確定要刪除設定檔 \"{name}\" 嗎？",
   "channels_channelUpdated": "频道 \"{name}\" 已更新",
   "@channels_channelUpdated": {
     "placeholders": {
@@ -413,7 +431,7 @@
   "channels_publicChannelAdded": "已添加公共频道",
   "channels_sortBy": "排序方式",
   "channels_sortManual": "手动",
-  "channels_sortAZ": "A-Z",
+  "channels_sortAZ": "A到Z",
   "channels_sortLatestMessages": "最新消息",
   "channels_sortUnread": "未读",
   "channels_createPrivateChannel": "创建私有频道",
@@ -1021,7 +1039,7 @@
   "repeater_guestPasswordHelper": "只读访问密码",
   "repeater_radioSettings": "无线电设置",
   "repeater_frequencyMhz": "频率 (MHz)",
-  "repeater_frequencyHelper": "300-2500 MHz",
+  "repeater_frequencyHelper": "300-2500 兆赫",
   "repeater_txPower": "TX 功率",
   "repeater_txPowerHelper": "1-30 dBm",
   "repeater_bandwidth": "带宽",
@@ -1088,6 +1106,81 @@
   },
   "repeater_confirm": "确认",
   "repeater_settingsSaved": "设置保存成功",
+  "repeater_rxGain": "增强的 RX 增益",
+  "repeater_rxGainHelper": "更高的灵敏度，更大的电流消耗（仅适用于 SX1262/SX1268）",
+  "repeater_refreshRxGain": "重新启动增强型 RX 功能",
+  "repeater_multiAcks": "多重确认",
+  "repeater_multiAcksSubtitle": "通过多个路径确认消息，以提高传递效率。",
+  "repeater_refreshMultiAcks": "刷新多个确认",
+  "repeater_networkHealth": "网络健康",
+  "repeater_loopDetect": "循环检测",
+  "repeater_loopDetectHelper": "创建看起来像路由环的“洪水包”",
+  "repeater_loopDetectOff": "离开",
+  "repeater_loopDetectMinimal": "最少",
+  "repeater_loopDetectModerate": "适度的",
+  "repeater_loopDetectStrict": "严格",
+  "repeater_dutyCycle": "工作周期",
+  "repeater_dutyCycleHelper": "最大可使用的空闲时间百分比",
+  "repeater_dutyCyclePercent": "{percent}%",
+  "@repeater_dutyCyclePercent": {
+    "placeholders": {
+      "percent": {
+        "type": "int"
+      }
+    }
+  },
+  "repeater_ownerInfo": "运营商信息",
+  "repeater_ownerInfoHelper": "此复播器的公共元数据",
+  "repeater_refreshOwnerInfo": "刷新操作员信息",
+  "repeater_floodMax": "最大跳跃次数",
+  "repeater_floodMaxHelper": "一个洪水包中，最大可以传输的跳数 (0-64)",
+  "repeater_advancedSettings": "高级",
+  "repeater_advancedSettingsSubtitle": "高级操作员使用的调节旋钮",
+  "repeater_pathHashMode": "路径哈希模式",
+  "repeater_pathHashModeHelper": "用于编码此复用器的 ID 的字节数，在“洪流路径/环检测”标签中使用。 0=1 字节（256 个 ID，最多 64 个跳跃），1=2 字节（65K 个 ID，最多 32 个跳跃），2=3 字节（16M 个 ID，最多 21 个跳跃）。 v1.13 及更早版本的固件会使用多字节路径——只有在您的网络升级到 v1.14 或更高版本后才会生效。",
+  "repeater_txDelay": "洪水（德克萨斯州）延误",
+  "repeater_txDelayHelper": "对于洪水流量，重新传输间隔应设置为包的传输时间（0-2，默认值为0.5）的倍数。 较高的值意味着更少的冲突，但传输速度会变慢。",
+  "repeater_directTxDelay": "直接的 TX 延迟",
+  "repeater_directTxDelayHelper": "对于直接（非广播）流量，重新传输间隔应设置为包的传输时间（0-2，默认值为0.3）的倍数。",
+  "repeater_intThresh": "干扰阈值",
+  "repeater_intThreshHelper": "将阈值传递给射频信号的噪声水平校准，使其能够拒绝高于该水平的干扰。 0 表示禁用——只有在您在嘈杂频段中看到 RX 错误时才启用。",
+  "repeater_agcResetInterval": "AGC 恢复间隔",
+  "repeater_agcResetIntervalHelper": "为了从失控的增益状态中恢复，应该多久重置收音机的自动增益控制？设置为“秒”，每次重置间隔为4秒。将此选项设置为“0”将禁用周期性重置。",
+  "repeater_actionsTitle": "行动",
+  "repeater_sendAdvert": "发布防洪广告",
+  "repeater_sendAdvertSubtitle": "通过网络播放防洪广告",
+  "repeater_sendAdvertZeroHop": "发送零跳广告",
+  "repeater_sendAdvertZeroHopSubtitle": "进行单跳广告广播（不使用中继）",
+  "repeater_clockSync": "现在同步时钟",
+  "repeater_clockSyncSubtitle": "将手机的时间设置为与中继器同步",
+  "repeater_actionSucceeded": "{action} 成功",
+  "@repeater_actionSucceeded": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_actionFailed": "{action} 失败：{error}",
+  "@repeater_actionFailed": {
+    "placeholders": {
+      "action": {
+        "type": "String"
+      },
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "repeater_settingsSavedRebootNeeded": "设置已保存 — 重启发射器以应用",
+  "repeater_settingsPartialFailure": "部分设置失败：{failures}",
+  "@repeater_settingsPartialFailure": {
+    "placeholders": {
+      "failures": {
+        "type": "String"
+      }
+    }
+  },
   "repeater_errorSavingSettings": "保存设置时出错：{error}",
   "@repeater_errorSavingSettings": {
     "placeholders": {
@@ -1099,11 +1192,9 @@
   "repeater_refreshBasicSettings": "刷新基本设置",
   "repeater_refreshRadioSettings": "刷新无线电设置",
   "repeater_refreshTxPower": "刷新 TX 功率",
-  "repeater_refreshLocationSettings": "刷新位置设置",
   "repeater_refreshPacketForwarding": "刷新包转发",
   "repeater_refreshGuestAccess": "刷新访客权限",
   "repeater_refreshPrivacyMode": "刷新隐私模式",
-  "repeater_refreshAdvertisementSettings": "刷新广播设置",
   "repeater_refreshed": "{label} 已刷新",
   "@repeater_refreshed": {
     "placeholders": {
@@ -1221,6 +1312,43 @@
       }
     }
   },
+  "telemetry_digitalInputLabel": "数字输入",
+  "telemetry_digitalOutputLabel": "数字输出",
+  "telemetry_analogInputLabel": "模拟输入",
+  "telemetry_analogOutputLabel": "模拟输出",
+  "telemetry_genericLabel": "通用传感器",
+  "telemetry_luminosityLabel": "照度",
+  "telemetry_presenceLabel": "存在检测",
+  "telemetry_humidityLabel": "湿度",
+  "telemetry_accelerometerLabel": "加速度计",
+  "telemetry_pressureLabel": "气压",
+  "telemetry_altitudeLabel": "高度",
+  "telemetry_frequencyLabel": "频率",
+  "telemetry_percentageLabel": "百分比",
+  "telemetry_concentrationLabel": "浓度",
+  "telemetry_powerLabel": "功率",
+  "telemetry_distanceLabel": "距离",
+  "telemetry_energyLabel": "能量",
+  "telemetry_directionLabel": "方向",
+  "telemetry_timeLabel": "时间",
+  "telemetry_gyrometerLabel": "陀螺仪",
+  "telemetry_colourLabel": "颜色",
+  "telemetry_gpsLabel": "GPS",
+  "telemetry_switchLabel": "开关",
+  "telemetry_polylineLabel": "折线",
+  "telemetry_altitudeValue": "{meters} m",
+  "telemetry_frequencyValue": "{hertz} Hz",
+  "telemetry_pressureValue": "{hpa} hPa",
+  "telemetry_luminosityValue": "{lux} lx",
+  "telemetry_powerValue": "{watts} W",
+  "telemetry_distanceValue": "{meters} m",
+  "telemetry_energyValue": "{kilowattHours} kWh",
+  "telemetry_directionValue": "{degrees}°",
+  "telemetry_concentrationValue": "{ppm} ppm",
+  "telemetry_percentageValue": "{percent}%",
+  "telemetry_analogValue": "{value}",
+  "telemetry_autoFetchQuantity": "请求次数",
+  "telemetry_error": "无法获取数据",
   "telemetry_noData": "暂无遥测数据",
   "telemetry_channelTitle": "频道 {channel}",
   "@telemetry_channelTitle": {
@@ -1246,7 +1374,7 @@
       }
     }
   },
-  "telemetry_voltageValue": "{volts}V",
+  "telemetry_voltageValue": "{volts}伏",
   "@telemetry_voltageValue": {
     "placeholders": {
       "volts": {
@@ -1540,7 +1668,7 @@
   "listFilter_sortBy": "排序方式",
   "listFilter_latestMessages": "最新消息",
   "listFilter_heardRecently": "最近听到",
-  "listFilter_az": "A-Z",
+  "listFilter_az": "A到Z",
   "listFilter_filters": "筛选",
   "listFilter_all": "全部",
   "listFilter_users": "用户",
@@ -1553,7 +1681,7 @@
   "pathTrace_notAvailable": "无法获取路径信息。",
   "pathTrace_refreshTooltip": "刷新路径追踪",
   "contacts_pathTrace": "路径追踪",
-  "contacts_ping": "Ping",
+  "contacts_ping": "乒",
   "contacts_repeaterPathTrace": "Trace 转发节点",
   "contacts_repeaterPing": "Ping 转发节点",
   "contacts_roomPathTrace": "Trace 房间服务器",
@@ -1893,5 +2021,435 @@
   "tcpErrorTimedOut": "TCP 连接超时。",
   "tcpConnectionFailed": "TCP 连接失败：{error}",
   "map_showDiscoveryContacts": "显示发现联系人",
-  "map_setAsMyLocation": "设置为我的位置"
+  "map_setAsMyLocation": "设置为我的位置",
+  "@path_routeWeight": {
+    "placeholders": {
+      "weight": {
+        "type": "String"
+      },
+      "max": {
+        "type": "String"
+      }
+    }
+  },
+  "settings_privacySubtitle": "控制要共享的信息。",
+  "settings_privacySettingsDescription": "选择您的设备与他人共享的信息。",
+  "settings_telemetryBaseMode": "遥测基础模式",
+  "settings_telemetryLocationMode": "遥测位置模式",
+  "settings_advertLocation": "广告位置",
+  "settings_advertLocationSubtitle": "在广告中包含位置",
+  "settings_allowByContact": "按联系人标志允许",
+  "settings_denyAll": "拒绝所有",
+  "settings_privacy": "隐私设置",
+  "settings_allowAll": "允许全部",
+  "contact_info": "联系信息",
+  "contact_teleBase": "遥测基站",
+  "contact_teleBaseSubtitle": "允许共享电池电量和基本遥测数据",
+  "settings_telemetryEnvironmentMode": "遥测环境模式",
+  "contact_teleLoc": "遥测位置",
+  "contact_teleEnv": "遥测环境",
+  "contact_teleEnvSubtitle": "允许共享环境传感器数据",
+  "contact_clearChat": "清除聊天记录",
+  "contact_lastSeen": "最近出现",
+  "contact_settings": "联系人设置",
+  "contact_teleLocSubtitle": "允许共享位置数据",
+  "contact_telemetry": "遥测数据",
+  "appSettings_maxRouteWeight": "最大路径重量",
+  "appSettings_initialRouteWeightSubtitle": "新发现路径的初始重量",
+  "appSettings_initialRouteWeight": "初始路线权重",
+  "appSettings_maxRouteWeightSubtitle": "一条路径可以累积的最大重量，取决于成功交付的数量。",
+  "appSettings_routeWeightSuccessIncrement": "成功权重增加",
+  "appSettings_routeWeightSuccessIncrementSubtitle": "在成功交付后，将重量添加到路径中",
+  "appSettings_routeWeightFailureDecrement": "失败权重降低",
+  "appSettings_routeWeightFailureDecrementSubtitle": "从一条路径上移除的货物，由于无法成功交付而移除。",
+  "appSettings_maxMessageRetries": "最大消息重试次数",
+  "appSettings_maxMessageRetriesSubtitle": "在将消息标记为失败之前，允许尝试的次数",
+  "path_routeWeight": "{weight}/{max}",
+  "settings_multiAck": "多重ACK",
+  "settings_telemetryModeUpdated": "遥测模式已更新",
+  "map_showOverlaps": "重复键重叠",
+  "map_runTraceWithReturnPath": "沿着相同的路径返回",
+  "@radioStats_noiseFloor": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastRssi": {
+    "placeholders": {
+      "rssiDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_lastSnr": {
+    "placeholders": {
+      "snr": {
+        "type": "String"
+      }
+    }
+  },
+  "@radioStats_txAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_rxAir": {
+    "placeholders": {
+      "seconds": {
+        "type": "int"
+      }
+    }
+  },
+  "@radioStats_stripNoise": {
+    "placeholders": {
+      "noiseDbm": {
+        "type": "int"
+      }
+    }
+  },
+  "chat_sendCooldown": "请稍等片刻后再尝试发送。",
+  "appSettings_jumpToOldestUnreadSubtitle": "在打开包含未读消息的聊天时，请滚动到第一个未读消息，而不是最新的消息。",
+  "appSettings_jumpToOldestUnread": "跳转到最旧、未读的文章",
+  "appSettings_languageHu": "匈牙利",
+  "appSettings_languageJa": "日语",
+  "appSettings_languageKo": "韩语",
+  "radioStats_tooltip": "无线电和网状结构统计数据",
+  "radioStats_screenTitle": "广播统计数据",
+  "radioStats_notConnected": "连接到设备以查看收音机统计信息。",
+  "radioStats_firmwareTooOld": "使用无线电统计功能需要配合使用 v8 或更高版本的固件。",
+  "radioStats_waiting": "正在等待数据…",
+  "radioStats_noiseFloor": "噪声水平：{noiseDbm} dBm",
+  "radioStats_lastRssi": "上次 RSSI 值：{rssiDbm} dBm",
+  "radioStats_lastSnr": "上次 SNR：{snr} dB",
+  "radioStats_txAir": "TX 频道播出时间（总时长）：{seconds} 秒",
+  "radioStats_rxAir": "RX 使用时长（总时长）：{seconds} 秒",
+  "radioStats_chartCaption": "近期的噪声水平（dBm）。",
+  "radioStats_stripNoise": "噪声水平：{noiseDbm} dBm",
+  "radioStats_stripWaiting": "正在获取收音机数据…",
+  "radioStats_settingsTile": "广播统计数据",
+  "radioStats_settingsSubtitle": "噪声水平、RSSI、信噪比和空中时间",
+  "@translation_downloadFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_title": "翻译",
+  "translation_enableSubtitle": "翻译收到的消息，并允许在发送前进行翻译。",
+  "translation_composerTitle": "在发送之前进行翻译",
+  "translation_enableTitle": "启用翻译功能",
+  "translation_composerSubtitle": "控制作曲家翻译图标的默认状态。",
+  "translation_autoIncomingTitle": "自动翻译消息",
+  "translation_autoIncomingSubtitle": "自动为通知以及聊天或频道翻译消息。",
+  "translation_translateMessage": "翻译消息",
+  "translation_targetLanguage": "目标语言",
+  "translation_useAppLanguage": "使用应用程序语言",
+  "translation_downloadedModelLabel": "下载的模型",
+  "translation_presetModelLabel": "预设的 Hugging Face 模型",
+  "translation_downloadModel": "下载模型",
+  "translation_manualUrlLabel": "手动模型网址",
+  "translation_downloading": "正在下载...",
+  "translation_working": "工作中...",
+  "translation_stop": "停止",
+  "translation_mergingChunks": "将下载的片段合并成最终文件...",
+  "translation_downloadedModels": "下载的模型",
+  "translation_deleteModel": "删除模型",
+  "translation_modelDownloaded": "翻译模型已下载。",
+  "translation_downloadStopped": "下载已停止。",
+  "translation_downloadFailed": "下载失败：{error}",
+  "translation_enterUrlFirst": "首先，请输入模型的 URL。",
+  "@scanner_linuxPairingPinPrompt": {
+    "placeholders": {
+      "deviceName": {
+        "type": "String"
+      }
+    }
+  },
+  "scanner_linuxPairingPinTitle": "蓝牙配对 PIN",
+  "scanner_linuxPairingPinPrompt": "输入 {deviceName} 的 PIN 码（如果为空，则留空）。",
+  "scanner_linuxPairingHidePin": "隐藏 PIN",
+  "scanner_linuxPairingShowPin": "显示PIN码",
+  "@translation_translateTo": {
+    "placeholders": {
+      "language": {
+        "type": "String"
+      }
+    }
+  },
+  "translation_composerDisabledHint": "使用原始的打字方式发送消息。",
+  "translation_messageTranslation": "消息翻译",
+  "translation_composerEnabledHint": "消息将在发送前进行翻译。",
+  "translation_translateBeforeSending": "在发送前进行翻译",
+  "translation_translateTo": "翻译成 {language}",
+  "translation_translationOptions": "翻译选项",
+  "translation_systemLanguage": "系统语言",
+  "repeater_cliQuickDiscovery": "发现邻居",
+  "repeater_cliQuickClockSync": "同步时钟",
+  "@repeater_clockSyncAfterLogin": {
+    "description": "Repeater setting: auto sync device clock after successful login"
+  },
+  "@repeater_clockSyncAfterLoginSubtitle": {
+    "description": "Repeater setting subtitle: describes the clock sync after login behavior"
+  },
+  "repeater_clockSyncAfterLogin": "登录后，自动同步时钟",
+  "repeater_clockSyncAfterLoginSubtitle": "在成功登录后，自动发送“时钟同步”指令。",
+  "repeater_guestTools": "访客工具",
+  "repeater_guest": "重复器信息",
+  "chat_sendMessage": "发送消息",
+  "room_guest": "服务器信息",
+  "repeater_getCategory": "获取值",
+  "repeater_powerMgmt": "电源管理",
+  "repeater_sensors": "传感器",
+  "repeater_cliHelpPowerOff": "关闭设备。（不应有任何响应）",
+  "repeater_cliHelpClkReboot": "将时钟重置为已知的时间点，并重启设备。",
+  "repeater_cliHelpAdvertZeroHop": "发送无中继广告（仅限于邻居）。",
+  "repeater_cliHelpStartOta": "在支持的板上启动通过空中进行固件更新。",
+  "repeater_cliHelpTime": "将设备时钟设置为给定的 Unix 纪元秒。时钟不能倒退。",
+  "repeater_cliHelpBoard": "显示制造商/硬件标识。",
+  "repeater_cliHelpDiscoverNeighbors": "向附近的邻居发送节点发现请求。（仅限中继器）",
+  "repeater_cliHelpPowersaving": "显示节能模式是否已开启或已关闭。",
+  "repeater_cliHelpPowersavingOnOff": "启用或禁用节能模式（如果支持）。",
+  "repeater_cliHelpErase": "（仅适用于序列模式）格式化设备的文件系统。清除所有设置和联系人。",
+  "repeater_cliHelpSetDutyCycle": "设定允许的最大传输时段百分比（1-100）。内部调整空闲时间因子。",
+  "repeater_cliHelpSetPrvKey": "（仅适用于序列号）替换设备身份私钥。需要重启才能应用。生成一个新的公钥。",
+  "repeater_cliHelpSetRadioRxGain": "（仅适用于 SX126x 芯片） 启用增强型 RX 增益，以在较高电流下提高灵敏度。",
+  "repeater_cliHelpSetOwnerInfo": "设置广告中包含的联系人信息字符串。使用 '|' 作为换行符。",
+  "repeater_cliHelpSetPathHashMode": "设置路径哈希模式。 0 = 传统模式，1 = 标准模式，2 = 严格模式。 影响路由路径的匹配方式。",
+  "repeater_cliHelpSetLoopDetect": "设置路由环检测的灵敏度：关闭、低、中、或高。",
+  "repeater_cliHelpSetFreq": "（仅限串行模式）快速设置频率。需要重启。 建议使用“设置收音机参数”功能，以便设置完整的收音机参数。",
+  "repeater_cliHelpSetBridgeChannel": "（仅适用于 ESPNow 桥）设置桥使用的 WiFi 频道（1-14）。",
+  "repeater_cliHelpGetName": "显示配置的节点名称。",
+  "repeater_cliHelpGetRole": "显示固件的功能（如：中继器、房间服务器等）。",
+  "repeater_cliHelpGetPublicKey": "显示设备的公钥。",
+  "repeater_cliHelpGetPrvKey": "（仅适用于序列号）显示设备的私钥。请将其视为机密信息。",
+  "repeater_cliHelpGetRepeat": "显示数据包转发（作为中继器）是否已启用或已禁用。",
+  "repeater_cliHelpGetTx": "显示当前的发射功率（以dBm为单位）。",
+  "repeater_cliHelpGetFreq": "显示配置的射频频率（以兆赫兹为单位）。",
+  "repeater_cliHelpGetRadio": "显示完整的无线电参数：频率、带宽、扩频因子、编码速率。",
+  "repeater_cliHelpGetRadioRxGain": "（仅适用于 SX126x 模块）显示 RX 放大器的状态。",
+  "repeater_cliHelpGetAf": "显示当前的空闲时间系数。",
+  "repeater_cliHelpGetDutyCycle": "显示当前允许的占空比（以百分比表示）。",
+  "repeater_cliHelpGetIntThresh": "显示信道干扰阈值（以dB为单位）。",
+  "repeater_cliHelpGetAgcResetInterval": "显示 AGC 重置的间隔时间（以秒为单位）。",
+  "repeater_cliHelpGetMultiAcks": "显示双重确认模式是否已启用（1）或已禁用（0）。",
+  "repeater_cliHelpGetAllowReadOnly": "显示是否允许访客仅限查看权限。",
+  "repeater_cliHelpGetAdvertInterval": "显示本地广告的时间间隔，单位为分钟。",
+  "repeater_cliHelpGetFloodAdvertInterval": "显示洪水广告的播放时间间隔，以小时为单位。",
+  "repeater_cliHelpGetGuestPassword": "显示已配置的访客密码。",
+  "repeater_cliHelpGetLat": "显示已配置的纬度。",
+  "repeater_cliHelpGetLon": "显示已配置的经度。",
+  "repeater_cliHelpGetRxDelay": "显示 rxdelay 的基本值。",
+  "repeater_cliHelpGetTxDelay": "显示洪水模式下的传输延迟系数。",
+  "repeater_cliHelpGetDirectTxDelay": "显示直接模式下的时延系数。",
+  "repeater_cliHelpGetFloodMax": "显示最大洪水传播次数。",
+  "repeater_cliHelpGetOwnerInfo": "显示所有者的联系信息。",
+  "repeater_cliHelpGetPathHashMode": "显示哈希模式（0/1/2）。",
+  "repeater_cliHelpGetLoopDetect": "显示循环检测的灵敏度。",
+  "repeater_cliHelpGetAcl": "（仅适用于序列号）列出复用器上的访问控制条目。",
+  "repeater_cliHelpGetBridgeEnabled": "显示桥是否已启用。",
+  "repeater_cliHelpGetBridgeDelay": "显示桥梁延迟的时间，单位为毫秒。",
+  "repeater_cliHelpGetBridgeSource": "显示桥接设备是否接收或发送 RX 或 TX 类型的数据包。",
+  "repeater_cliHelpGetBridgeBaud": "（仅限 RS232 桥）显示桥的波特率。",
+  "repeater_cliHelpGetBridgeChannel": "（仅适用于 ESPNow 桥）显示桥的 WiFi 通道。",
+  "repeater_cliHelpGetBridgeSecret": "（仅适用于 ESPNow 桥）显示桥的共享密钥。",
+  "repeater_cliHelpGetBootloaderVer": "（仅适用于NRF52）显示引导程序版本。",
+  "repeater_cliHelpGetAdcMultiplier": "显示 ADC 乘数（电池电压缩放）。",
+  "repeater_cliHelpGetPwrMgtSupport": "报告董事会是否支持电源管理功能。",
+  "repeater_cliHelpGetPwrMgtSource": "显示当前的电源：外部电源或电池。",
+  "repeater_cliHelpGetPwrMgtBootReason": "显示最近的重置和关闭原因。",
+  "repeater_cliHelpGetPwrMgtBootMv": "显示启动时的电池电压，单位为毫伏 (mV)。",
+  "repeater_cliHelpSensorGet": "通过按键读取自定义传感器设置。",
+  "repeater_cliHelpSensorSet": "编写自定义传感器设置。",
+  "repeater_cliHelpSensorList": "列出所有自定义传感器设置，并按可选的起始索引进行分页显示。",
+  "repeater_cliHelpRegionDefault": "显示当前默认的区域范围。",
+  "repeater_cliHelpRegionDefaultSet": "设置默认的区域范围。使用 \"<null>\" 可以清除。",
+  "repeater_cliHelpRegionListAllowed": "列出允许洪水交通的区域。",
+  "repeater_cliHelpRegionListDenied": "列出禁止洪水交通的区域。",
+  "repeater_cliHelpStatsPackets": "（仅显示序列信息）显示数据包级别的统计信息。",
+  "repeater_cliHelpStatsRadio": "（仅显示序列信息）显示收音机相关统计数据。",
+  "repeater_cliHelpStatsCore": "（仅显示序列号）显示核心固件统计信息。",
+  "common_done": "Done",
+  "background_serviceTitle": "MeshCore running",
+  "background_serviceText": "Keeping BLE connected",
+  "appSettings_translationModelDeleted": "Deleted {name}",
+  "@appSettings_translationModelDeleted": {
+    "placeholders": {
+      "name": {
+        "type": "String"
+      }
+    }
+  },
+  "appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
+  "@appSettings_translationModelDeleteFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "channels_channelUpdateFailed": "Failed to update channel: {error}",
+  "@channels_channelUpdateFailed": {
+    "placeholders": {
+      "error": {
+        "type": "String"
+      }
+    }
+  },
+  "map_type": "Type",
+  "map_path": "Path",
+  "map_location": "Location",
+  "map_estLocation": "Est. Location",
+  "map_publicKey": "Public Key",
+  "map_publicKeyPrefixHint": "e.g. ab12",
+  "contact_typeChat": "Chat",
+  "contact_typeRepeater": "Repeater",
+  "contact_typeRoom": "Room",
+  "contact_typeSensor": "Sensor",
+  "contact_typeUnknown": "Unknown",
+  "channels_via": "via {path}",
+  "chat_score": "Score",
+  "map_sharedAt": "已分享",
+  "@losBlockedSpotChip": {
+    "placeholders": {
+      "distance": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      }
+    }
+  },
+  "@losSelectedObstructionDetails": {
+    "placeholders": {
+      "obstruction": {
+        "type": "String"
+      },
+      "heightUnit": {
+        "type": "String"
+      },
+      "distanceFromA": {
+        "type": "String"
+      },
+      "distanceUnit": {
+        "type": "String"
+      },
+      "distanceFromB": {
+        "type": "String"
+      }
+    }
+  },
+  "losBlockedSpotsTitle": "被占用区域",
+  "losBlockedSpotsHint": "点击地图上的某个被遮盖的区域，以突出显示该区域。",
+  "losSelectedObstructionTitle": "选择性阻碍",
+  "losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
+  "losSelectedObstructionDetails": "Blocked by {obstruction} {heightUnit}, {distanceFromA} from A and {distanceFromB} from B ({distanceUnit}).",
+  "chat_markAsUnread": "标记为未读",
+  "settings_companionDebugLog": "调试日志",
+  "chat_newMessages": "新的消息",
+  "settings_companionDebugLogSubtitle": "BLE/TCP/USB 协议、响应和原始数据",
+  "repeater_chanUtil": "频道利用率",
+  "@routing_lastWorked": {
+    "placeholders": {
+      "when": {
+        "type": "String"
+      }
+    }
+  },
+  "@routing_deliveryCounts": {
+    "placeholders": {
+      "successes": {
+        "type": "int"
+      },
+      "failures": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_hopCounter": {
+    "placeholders": {
+      "count": {
+        "type": "int"
+      }
+    }
+  },
+  "@pathEditor_invalidTokens": {
+    "placeholders": {
+      "tokens": {
+        "type": "String"
+      }
+    }
+  },
+  "@channels_communityShortId": {
+    "placeholders": {
+      "id": {
+        "type": "String"
+      }
+    }
+  },
+  "messageStatus_sent": "发送",
+  "common_undo": "撤销",
+  "messageStatus_delivered": "已送达",
+  "messageStatus_pending": "发送",
+  "messageStatus_failed": "发送失败",
+  "messageStatus_repeated": "多次听到",
+  "contacts_moreOptions": "更多选择",
+  "contacts_searchOpen": "搜索联系人",
+  "contacts_searchClose": "高级搜索",
+  "routing_title": "路由",
+  "routing_modeAuto": "汽车",
+  "routing_modeFlood": "洪水",
+  "routing_modeManual": "手册",
+  "routing_modeAutoHint": "自动选择已知最佳路径，当没有已知路径时，则进行“洪水”搜索。",
+  "routing_modeFloodHint": "通过所有中继站进行广播。 这种方式最可靠，但占用更多的时间。",
+  "routing_modeManualHint": "总是按照您设置的路径进行导航。",
+  "routing_currentRoute": "当前路线",
+  "routing_directNoHops": "直接连接— 无中继跳",
+  "routing_noPathYet": "目前还没有找到路径。直到找到路径，才会收到后续消息。",
+  "routing_floodBroadcast": "通过所有中继器进行广播",
+  "routing_editPath": "编辑路径",
+  "routing_forgetPath": "忘记原路",
+  "routing_knownPaths": "已知的路径",
+  "routing_knownPathsHint": "点击该路径以切换到它。",
+  "routing_inUse": "使用中",
+  "routing_qualityStrong": "强劲的初始阶段",
+  "routing_qualityGood": "不错的开端",
+  "routing_qualityFair": "第一次尝试，结果良好",
+  "routing_qualityWorked": "已完成",
+  "routing_qualityFlood": "通过新闻报道",
+  "routing_qualityUntested": "未经测试",
+  "routing_lastWorked": "工作于 {when}",
+  "routing_neverWorked": "从未得到证实",
+  "routing_floodDelivery": "洪水配送",
+  "pathEditor_title": "构建路径",
+  "pathEditor_noHops": "目前还没有添加任何啤酒花。点击下面的“添加”按钮，按顺序添加，或者直接保存，不添加任何啤酒花。",
+  "pathEditor_addHops": "按照顺序添加啤酒花",
+  "pathEditor_searchRepeaters": "重复搜索",
+  "pathEditor_advancedHex": "高级：原始十六进制路径",
+  "pathEditor_hexLabel": "十六进制前缀",
+  "pathEditor_hexHelper": "每次跳跃，使用两个十六进制字符，用逗号分隔。",
+  "pathEditor_invalidTokens": "无效：{tokens}",
+  "pathEditor_tooManyHops": "最多 64 个跳跃",
+  "pathEditor_usePath": "请使用此路径",
+  "pathEditor_removeHop": "去除啤酒花",
+  "routing_deliveryCounts": "{successes} delivered, {failures} failed",
+  "pathEditor_hopCounter": "{count} of 64 hops",
+  "pathEditor_unknownHop": "未知的重复器",
+  "map_zoomIn": "放大",
+  "map_zoomOut": "放大",
+  "map_centerMap": "中心地图",
+  "chrome_bluetoothRequiresChromium": "Web Bluetooth 需要 Chromium 浏览器",
+  "channels_communityShortId": "ID：{id}...",
+  "pathTrace_legendGpsConfirmed": "通过GPS确认",
+  "pathTrace_legendInferred": "推测的位置"
 }

lib/l10n/contact_localization.dart

@@ -0,0 +1,36 @@
+import '../connector/meshcore_protocol.dart';
+import '../models/contact.dart';
+import 'app_localizations.dart';
+
+/// UI-level localization helpers for [Contact].
+///
+/// Kept out of the model layer so `Contact` does not depend on
+/// `AppLocalizations`. Use these from widgets/screens; for logs and
+/// non-UI export use `Contact.typeLabelRaw`.
+extension ContactLocalization on Contact {
+  String typeLabel(AppLocalizations l10n) {
+    switch (type) {
+      case advTypeChat:
+        return l10n.contact_typeChat;
+      case advTypeRepeater:
+        return l10n.contact_typeRepeater;
+      case advTypeRoom:
+        return l10n.contact_typeRoom;
+      case advTypeSensor:
+        return l10n.contact_typeSensor;
+      default:
+        return l10n.contact_typeUnknown;
+    }
+  }
+
+  String pathLabel(AppLocalizations l10n) {
+    if (pathOverride != null) {
+      if (pathOverride! < 0) return l10n.chat_floodForced;
+      if (pathOverride == 0) return l10n.chat_directForced;
+      return l10n.chat_hopsForced(pathOverride!);
+    }
+    if (pathLength < 0) return l10n.channelPath_floodPath;
+    if (pathLength == 0) return l10n.chat_direct;
+    return l10n.chat_hopsCount(pathLength);
+  }
+}

lib/main.dart

@@ -1,6 +1,7 @@
 import 'package:flutter/material.dart';
 import 'package:flutter_localizations/flutter_localizations.dart';
 import 'package:flutter/foundation.dart';
+import 'package:flutter/services.dart';
 import 'l10n/app_localizations.dart';
 import 'package:provider/provider.dart';
 
@@ -19,12 +20,25 @@ import 'services/app_debug_log_service.dart';
 import 'services/background_service.dart';
 import 'services/map_tile_cache_service.dart';
 import 'services/chat_text_scale_service.dart';
+import 'services/translation_service.dart';
+import 'services/ui_view_state_service.dart';
+import 'services/timeout_prediction_service.dart';
 import 'storage/prefs_manager.dart';
+import 'theme/mesh_theme.dart';
 import 'utils/app_logger.dart';
 
 void main() async {
   WidgetsFlutterBinding.ensureInitialized();
 
+  // On desktop, debugPrint is not suppressed in release builds and every
+  // call is a synchronous stdout write. The connector logs heavily on hot
+  // paths (frame handling, queue/channel sync), which shows up as syscall
+  // overhead on low-end Linux machines (issue #202). The in-app debug log
+  // screens are unaffected — they store entries themselves.
+  if (kReleaseMode) {
+    debugPrint = (String? message, {int? wrapWidth}) {};
+  }
+
   // Initialize SharedPreferences cache
   await PrefsManager.initialize();
 
@@ -39,6 +53,9 @@ void main() async {
   final backgroundService = BackgroundService();
   final mapTileCacheService = MapTileCacheService();
   final chatTextScaleService = ChatTextScaleService();
+  final translationService = TranslationService(appSettingsService);
+  final uiViewStateService = UiViewStateService();
+  final timeoutPredictionService = TimeoutPredictionService(storage);
 
   // Load settings
   await appSettingsService.loadSettings();
@@ -53,18 +70,26 @@ void main() async {
   final notificationService = NotificationService();
   await notificationService.initialize();
   await backgroundService.initialize();
+  backgroundService.setLanguageOverrideProvider(
+    () => appSettingsService.settings.languageOverride,
+  );
   _registerThirdPartyLicenses();
 
   await chatTextScaleService.initialize();
+  await translationService.refreshDownloadedModels();
+  await uiViewStateService.initialize();
+  await timeoutPredictionService.initialize();
 
   // Wire up connector with services
   connector.initialize(
     retryService: retryService,
     pathHistoryService: pathHistoryService,
     appSettingsService: appSettingsService,
+    translationService: translationService,
     bleDebugLogService: bleDebugLogService,
     appDebugLogService: appDebugLogService,
     backgroundService: backgroundService,
+    timeoutPredictionService: timeoutPredictionService,
   );
 
   await connector.loadContactCache();
@@ -86,6 +111,9 @@ void main() async {
       appDebugLogService: appDebugLogService,
       mapTileCacheService: mapTileCacheService,
       chatTextScaleService: chatTextScaleService,
+      translationService: translationService,
+      uiViewStateService: uiViewStateService,
+      timeoutPredictionService: timeoutPredictionService,
     ),
   );
 }
@@ -121,6 +149,9 @@ class MeshCoreApp extends StatelessWidget {
   final AppDebugLogService appDebugLogService;
   final MapTileCacheService mapTileCacheService;
   final ChatTextScaleService chatTextScaleService;
+  final TranslationService translationService;
+  final UiViewStateService uiViewStateService;
+  final TimeoutPredictionService timeoutPredictionService;
 
   const MeshCoreApp({
     super.key,
@@ -133,6 +164,9 @@ class MeshCoreApp extends StatelessWidget {
     required this.appDebugLogService,
     required this.mapTileCacheService,
     required this.chatTextScaleService,
+    required this.translationService,
+    required this.uiViewStateService,
+    required this.timeoutPredictionService,
   });
 
   @override
@@ -146,8 +180,11 @@ class MeshCoreApp extends StatelessWidget {
         ChangeNotifierProvider.value(value: bleDebugLogService),
         ChangeNotifierProvider.value(value: appDebugLogService),
         ChangeNotifierProvider.value(value: chatTextScaleService),
+        ChangeNotifierProvider.value(value: translationService),
+        ChangeNotifierProvider.value(value: uiViewStateService),
         Provider.value(value: storage),
         Provider.value(value: mapTileCacheService),
+        ChangeNotifierProvider.value(value: timeoutPredictionService),
       ],
       child: Consumer<AppSettingsService>(
         builder: (context, settingsService, child) {
@@ -164,23 +201,8 @@ class MeshCoreApp extends StatelessWidget {
             locale: _localeFromSetting(
               settingsService.settings.languageOverride,
             ),
-            theme: ThemeData(
-              colorScheme: ColorScheme.fromSeed(seedColor: Colors.blue),
-              useMaterial3: true,
-              snackBarTheme: const SnackBarThemeData(
-                behavior: SnackBarBehavior.floating,
-              ),
-            ),
-            darkTheme: ThemeData(
-              colorScheme: ColorScheme.fromSeed(
-                seedColor: Colors.blue,
-                brightness: Brightness.dark,
-              ),
-              useMaterial3: true,
-              snackBarTheme: const SnackBarThemeData(
-                behavior: SnackBarBehavior.floating,
-              ),
-            ),
+            theme: MeshTheme.light(),
+            darkTheme: MeshTheme.dark(),
             themeMode: _themeModeFromSetting(
               settingsService.settings.themeMode,
             ),
@@ -188,7 +210,10 @@ class MeshCoreApp extends StatelessWidget {
               // Update notification service with resolved locale
               final locale = Localizations.localeOf(context);
               NotificationService().setLocale(locale);
-              return child ?? const SizedBox.shrink();
+              return AnnotatedRegion<SystemUiOverlayStyle>(
+                value: _systemUiOverlayStyle(context),
+                child: child ?? const SizedBox.shrink(),
+              );
             },
             home: (PlatformInfo.isWeb && !PlatformInfo.isChrome)
                 ? const ChromeRequiredScreen()
@@ -210,6 +235,24 @@ class MeshCoreApp extends StatelessWidget {
     }
   }
 
+  SystemUiOverlayStyle _systemUiOverlayStyle(BuildContext context) {
+    final theme = Theme.of(context);
+    final colorScheme = theme.colorScheme;
+    final isDark = theme.brightness == Brightness.dark;
+    final iconBrightness = isDark ? Brightness.light : Brightness.dark;
+
+    // Keep Android system bars aligned with the resolved Flutter theme.
+    return SystemUiOverlayStyle(
+      statusBarColor: Colors.transparent,
+      statusBarIconBrightness: iconBrightness,
+      statusBarBrightness: isDark ? Brightness.dark : Brightness.light,
+      systemNavigationBarColor: colorScheme.surface,
+      systemNavigationBarIconBrightness: iconBrightness,
+      systemNavigationBarDividerColor: colorScheme.surface,
+      systemNavigationBarContrastEnforced: false,
+    );
+  }
+
   Locale? _localeFromSetting(String? languageCode) {
     if (languageCode == null) return null;
     return Locale(languageCode);

lib/models/app_settings.dart

@@ -1,3 +1,5 @@
+import 'translation_support.dart';
+
 enum UnitSystem { metric, imperial }
 
 extension UnitSystemValue on UnitSystem {
@@ -11,6 +13,67 @@ extension UnitSystemValue on UnitSystem {
   }
 }
 
+const Map<String, String> defaultCyr2LatCharMap = {
+  'А': 'A',
+  'В': 'B',
+  'Е': 'E',
+  'Ё': 'E',
+  'З': '3',
+  'К': 'K',
+  'М': 'M',
+  'Н': 'H',
+  'О': 'O',
+  'Р': 'P',
+  'С': 'C',
+  'Т': 'T',
+  'Х': 'X',
+  'Ь': 'b',
+  'а': 'a',
+  'е': 'e',
+  'ё': 'e',
+  'о': 'o',
+  'р': 'p',
+  'с': 'c',
+  'у': 'y',
+  'х': 'x',
+};
+
+class Cyr2LatProfile {
+  final String id;
+  final String name;
+  final Map<String, String> charMap;
+
+  Cyr2LatProfile({required this.id, required this.name, required this.charMap});
+
+  Map<String, dynamic> toJson() {
+    return {'id': id, 'name': name, 'char_map': charMap};
+  }
+
+  factory Cyr2LatProfile.fromJson(Map<String, dynamic> json) {
+    return Cyr2LatProfile(
+      id: json['id'] as String,
+      name: json['name'] as String,
+      charMap:
+          (json['char_map'] as Map?)?.map(
+            (key, value) => MapEntry(key.toString(), value.toString()),
+          ) ??
+          {},
+    );
+  }
+
+  Cyr2LatProfile copyWith({
+    String? id,
+    String? name,
+    Map<String, String>? charMap,
+  }) {
+    return Cyr2LatProfile(
+      id: id ?? this.id,
+      name: name ?? this.name,
+      charMap: charMap ?? this.charMap,
+    );
+  }
+}
+
 class AppSettings {
   static const Object _unset = Object();
 
@@ -18,6 +81,7 @@ class AppSettings {
   final bool mapShowRepeaters;
   final bool mapShowChatNodes;
   final bool mapShowOtherNodes;
+  final bool mapShowOverlaps;
   final double mapTimeFilterHours; // 0 = all time
   final bool mapKeyPrefixEnabled;
   final String mapKeyPrefix;
@@ -32,6 +96,11 @@ class AppSettings {
   final bool notifyOnNewChannelMessage;
   final bool notifyOnNewAdvert;
   final bool autoRouteRotationEnabled;
+  final double maxRouteWeight;
+  final double initialRouteWeight;
+  final double routeWeightSuccessIncrement;
+  final double routeWeightFailureDecrement;
+  final int maxMessageRetries;
   final String themeMode;
   final String? languageOverride; // null = system default
   final bool appDebugLogEnabled;
@@ -40,18 +109,39 @@ class AppSettings {
   final UnitSystem unitSystem;
   final Set<String> mutedChannels;
   final bool mapShowDiscoveryContacts;
+  final String tcpServerAddress;
+  final int tcpServerPort;
+  final bool jumpToOldestUnread;
+  final bool translationEnabled;
+  final bool autoTranslateIncomingMessages;
+  final String? translationTargetLanguageCode;
+  final bool composerTranslationEnabled;
+  final String? translationModelSourceUrl;
+  final String? translationSelectedModelId;
+  final List<TranslationModelRecord> translationDownloadedModels;
+  final List<Cyr2LatProfile> cyr2latProfiles;
+  final String selectedCyr2latProfileId;
+
+  Map<String, String> get cyr2latCharMap {
+    final profile = cyr2latProfiles.firstWhere(
+      (p) => p.id == selectedCyr2latProfileId,
+      orElse: () => cyr2latProfiles.first,
+    );
+    return profile.charMap;
+  }
 
   AppSettings({
     this.clearPathOnMaxRetry = false,
     this.mapShowRepeaters = true,
     this.mapShowChatNodes = true,
     this.mapShowOtherNodes = true,
+    this.mapShowOverlaps = false,
     this.mapTimeFilterHours = 0, // Default to all time
     this.mapKeyPrefixEnabled = false,
     this.mapKeyPrefix = '',
     this.mapShowMarkers = true,
     this.mapShowGuessedLocations = true,
-    this.enableMessageTracing = false,
+    this.enableMessageTracing = true,
     this.mapCacheBounds,
     this.mapCacheMinZoom = 10,
     this.mapCacheMaxZoom = 15,
@@ -59,7 +149,12 @@ class AppSettings {
     this.notifyOnNewMessage = true,
     this.notifyOnNewChannelMessage = true,
     this.notifyOnNewAdvert = true,
-    this.autoRouteRotationEnabled = false,
+    this.autoRouteRotationEnabled = true,
+    this.maxRouteWeight = 5.0,
+    this.initialRouteWeight = 3.0,
+    this.routeWeightSuccessIncrement = 0.5,
+    this.routeWeightFailureDecrement = 0.2,
+    this.maxMessageRetries = 5,
     this.themeMode = 'system',
     this.languageOverride,
     this.appDebugLogEnabled = false,
@@ -68,9 +163,32 @@ class AppSettings {
     this.unitSystem = UnitSystem.metric,
     Set<String>? mutedChannels,
     this.mapShowDiscoveryContacts = true,
+    this.tcpServerAddress = '',
+    this.tcpServerPort = 0,
+    this.jumpToOldestUnread = false,
+    this.translationEnabled = false,
+    this.autoTranslateIncomingMessages = true,
+    this.translationTargetLanguageCode,
+    this.composerTranslationEnabled = false,
+    this.translationModelSourceUrl,
+    this.translationSelectedModelId,
+    List<TranslationModelRecord>? translationDownloadedModels,
+    List<Cyr2LatProfile>? cyr2latProfiles,
+    String? selectedCyr2latProfileId,
   }) : batteryChemistryByDeviceId = batteryChemistryByDeviceId ?? {},
        batteryChemistryByRepeaterId = batteryChemistryByRepeaterId ?? {},
-       mutedChannels = mutedChannels ?? {};
+       mutedChannels = mutedChannels ?? {},
+       translationDownloadedModels = translationDownloadedModels ?? const [],
+       cyr2latProfiles =
+           cyr2latProfiles ??
+           [
+             Cyr2LatProfile(
+               id: 'default',
+               name: 'Default',
+               charMap: defaultCyr2LatCharMap,
+             ),
+           ],
+       selectedCyr2latProfileId = selectedCyr2latProfileId ?? 'default';
 
   Map<String, dynamic> toJson() {
     return {
@@ -78,6 +196,7 @@ class AppSettings {
       'map_show_repeaters': mapShowRepeaters,
       'map_show_chat_nodes': mapShowChatNodes,
       'map_show_other_nodes': mapShowOtherNodes,
+      'map_show_overlaps': mapShowOverlaps,
       'map_time_filter_hours': mapTimeFilterHours,
       'map_key_prefix_enabled': mapKeyPrefixEnabled,
       'map_key_prefix': mapKeyPrefix,
@@ -92,6 +211,11 @@ class AppSettings {
       'notify_on_new_channel_message': notifyOnNewChannelMessage,
       'notify_on_new_advert': notifyOnNewAdvert,
       'auto_route_rotation_enabled': autoRouteRotationEnabled,
+      'max_route_weight': maxRouteWeight,
+      'initial_route_weight': initialRouteWeight,
+      'route_weight_success_increment': routeWeightSuccessIncrement,
+      'route_weight_failure_decrement': routeWeightFailureDecrement,
+      'max_message_retries': maxMessageRetries,
       'theme_mode': themeMode,
       'language_override': languageOverride,
       'app_debug_log_enabled': appDebugLogEnabled,
@@ -100,6 +224,22 @@ class AppSettings {
       'unit_system': unitSystem.value,
       'muted_channels': mutedChannels.toList(),
       'map_show_discovery_contacts': mapShowDiscoveryContacts,
+      'tcp_server_address': tcpServerAddress,
+      'tcp_server_port': tcpServerPort,
+      'jump_to_oldest_unread': jumpToOldestUnread,
+      'translation_enabled': translationEnabled,
+      'auto_translate_incoming_messages': autoTranslateIncomingMessages,
+      'translation_target_language_code': translationTargetLanguageCode,
+      'composer_translation_enabled': composerTranslationEnabled,
+      'translation_model_source_url': translationModelSourceUrl,
+      'translation_selected_model_id': translationSelectedModelId,
+      'translation_downloaded_models': translationDownloadedModels
+          .map((model) => model.toJson())
+          .toList(),
+      'cyr2lat_profiles': cyr2latProfiles
+          .map((profile) => profile.toJson())
+          .toList(),
+      'selected_cyr2lat_profile_id': selectedCyr2latProfileId,
     };
   }
 
@@ -116,6 +256,7 @@ class AppSettings {
       mapShowRepeaters: json['map_show_repeaters'] as bool? ?? true,
       mapShowChatNodes: json['map_show_chat_nodes'] as bool? ?? true,
       mapShowOtherNodes: json['map_show_other_nodes'] as bool? ?? true,
+      mapShowOverlaps: json['map_show_overlaps'] as bool? ?? false,
       mapTimeFilterHours:
           (json['map_time_filter_hours'] as num?)?.toDouble() ?? 0,
       mapKeyPrefixEnabled: json['map_key_prefix_enabled'] as bool? ?? false,
@@ -123,7 +264,7 @@ class AppSettings {
       mapShowMarkers: json['map_show_markers'] as bool? ?? true,
       mapShowGuessedLocations:
           json['map_show_guessed_locations'] as bool? ?? true,
-      enableMessageTracing: json['enable_message_tracing'] as bool? ?? false,
+      enableMessageTracing: json['enable_message_tracing'] as bool? ?? true,
       mapCacheBounds: (json['map_cache_bounds'] as Map?)?.map(
         (key, value) => MapEntry(key.toString(), (value as num).toDouble()),
       ),
@@ -135,7 +276,15 @@ class AppSettings {
           json['notify_on_new_channel_message'] as bool? ?? true,
       notifyOnNewAdvert: json['notify_on_new_advert'] as bool? ?? true,
       autoRouteRotationEnabled:
-          json['auto_route_rotation_enabled'] as bool? ?? false,
+          json['auto_route_rotation_enabled'] as bool? ?? true,
+      maxRouteWeight: (json['max_route_weight'] as num?)?.toDouble() ?? 5.0,
+      initialRouteWeight:
+          (json['initial_route_weight'] as num?)?.toDouble() ?? 3.0,
+      routeWeightSuccessIncrement:
+          (json['route_weight_success_increment'] as num?)?.toDouble() ?? 0.5,
+      routeWeightFailureDecrement:
+          (json['route_weight_failure_decrement'] as num?)?.toDouble() ?? 0.2,
+      maxMessageRetries: json['max_message_retries'] as int? ?? 5,
       themeMode: json['theme_mode'] as String? ?? 'system',
       languageOverride: json['language_override'] as String?,
       appDebugLogEnabled: json['app_debug_log_enabled'] as bool? ?? false,
@@ -157,6 +306,61 @@ class AppSettings {
           {},
       mapShowDiscoveryContacts:
           json['map_show_discovery_contacts'] as bool? ?? true,
+      tcpServerAddress: json['tcp_server_address'] as String? ?? '',
+      tcpServerPort: json['tcp_server_port'] as int? ?? 0,
+      jumpToOldestUnread: json['jump_to_oldest_unread'] as bool? ?? false,
+      translationEnabled: json['translation_enabled'] as bool? ?? false,
+      autoTranslateIncomingMessages:
+          json['auto_translate_incoming_messages'] as bool? ?? true,
+      translationTargetLanguageCode:
+          json['translation_target_language_code'] as String?,
+      composerTranslationEnabled:
+          json['composer_translation_enabled'] as bool? ?? false,
+      translationModelSourceUrl:
+          json['translation_model_source_url'] as String?,
+      translationSelectedModelId:
+          json['translation_selected_model_id'] as String?,
+      translationDownloadedModels:
+          (json['translation_downloaded_models'] as List<dynamic>?)
+              ?.map(
+                (entry) => TranslationModelRecord.fromJson(
+                  Map<String, dynamic>.from(entry as Map),
+                ),
+              )
+              .toList() ??
+          const [],
+      cyr2latProfiles:
+          (json['cyr2lat_profiles'] as List<dynamic>?)
+              ?.map(
+                (entry) => Cyr2LatProfile.fromJson(
+                  Map<String, dynamic>.from(entry as Map),
+                ),
+              )
+              .toList() ??
+          // Backward compatibility: if old cyr2lat_char_map exists, create a profile from it
+          (json['cyr2lat_char_map'] != null
+              ? [
+                  Cyr2LatProfile(
+                    id: 'migrated',
+                    name: 'Migrated Profile',
+                    charMap:
+                        (json['cyr2lat_char_map'] as Map?)?.map(
+                          (key, value) =>
+                              MapEntry(key.toString(), value.toString()),
+                        ) ??
+                        defaultCyr2LatCharMap,
+                  ),
+                ]
+              : [
+                  Cyr2LatProfile(
+                    id: 'default',
+                    name: 'Default',
+                    charMap: defaultCyr2LatCharMap,
+                  ),
+                ]),
+      selectedCyr2latProfileId:
+          json['selected_cyr2lat_profile_id'] as String? ??
+          (json['cyr2lat_char_map'] != null ? 'migrated' : 'default'),
     );
   }
 
@@ -165,6 +369,7 @@ class AppSettings {
     bool? mapShowRepeaters,
     bool? mapShowChatNodes,
     bool? mapShowOtherNodes,
+    bool? mapShowOverlaps,
     double? mapTimeFilterHours,
     bool? mapKeyPrefixEnabled,
     String? mapKeyPrefix,
@@ -179,6 +384,11 @@ class AppSettings {
     bool? notifyOnNewChannelMessage,
     bool? notifyOnNewAdvert,
     bool? autoRouteRotationEnabled,
+    double? maxRouteWeight,
+    double? initialRouteWeight,
+    double? routeWeightSuccessIncrement,
+    double? routeWeightFailureDecrement,
+    int? maxMessageRetries,
     String? themeMode,
     Object? languageOverride = _unset,
     bool? appDebugLogEnabled,
@@ -187,12 +397,25 @@ class AppSettings {
     UnitSystem? unitSystem,
     Set<String>? mutedChannels,
     bool? mapShowDiscoveryContacts,
+    String? tcpServerAddress,
+    int? tcpServerPort,
+    bool? jumpToOldestUnread,
+    bool? translationEnabled,
+    bool? autoTranslateIncomingMessages,
+    Object? translationTargetLanguageCode = _unset,
+    bool? composerTranslationEnabled,
+    Object? translationModelSourceUrl = _unset,
+    Object? translationSelectedModelId = _unset,
+    List<TranslationModelRecord>? translationDownloadedModels,
+    List<Cyr2LatProfile>? cyr2latProfiles,
+    String? selectedCyr2latProfileId,
   }) {
     return AppSettings(
       clearPathOnMaxRetry: clearPathOnMaxRetry ?? this.clearPathOnMaxRetry,
       mapShowRepeaters: mapShowRepeaters ?? this.mapShowRepeaters,
       mapShowChatNodes: mapShowChatNodes ?? this.mapShowChatNodes,
       mapShowOtherNodes: mapShowOtherNodes ?? this.mapShowOtherNodes,
+      mapShowOverlaps: mapShowOverlaps ?? this.mapShowOverlaps,
       mapTimeFilterHours: mapTimeFilterHours ?? this.mapTimeFilterHours,
       mapKeyPrefixEnabled: mapKeyPrefixEnabled ?? this.mapKeyPrefixEnabled,
       mapKeyPrefix: mapKeyPrefix ?? this.mapKeyPrefix,
@@ -212,6 +435,13 @@ class AppSettings {
       notifyOnNewAdvert: notifyOnNewAdvert ?? this.notifyOnNewAdvert,
       autoRouteRotationEnabled:
           autoRouteRotationEnabled ?? this.autoRouteRotationEnabled,
+      maxRouteWeight: maxRouteWeight ?? this.maxRouteWeight,
+      initialRouteWeight: initialRouteWeight ?? this.initialRouteWeight,
+      routeWeightSuccessIncrement:
+          routeWeightSuccessIncrement ?? this.routeWeightSuccessIncrement,
+      routeWeightFailureDecrement:
+          routeWeightFailureDecrement ?? this.routeWeightFailureDecrement,
+      maxMessageRetries: maxMessageRetries ?? this.maxMessageRetries,
       themeMode: themeMode ?? this.themeMode,
       languageOverride: languageOverride == _unset
           ? this.languageOverride
@@ -225,6 +455,28 @@ class AppSettings {
       mutedChannels: mutedChannels ?? this.mutedChannels,
       mapShowDiscoveryContacts:
           mapShowDiscoveryContacts ?? this.mapShowDiscoveryContacts,
+      tcpServerAddress: tcpServerAddress ?? this.tcpServerAddress,
+      tcpServerPort: tcpServerPort ?? this.tcpServerPort,
+      jumpToOldestUnread: jumpToOldestUnread ?? this.jumpToOldestUnread,
+      translationEnabled: translationEnabled ?? this.translationEnabled,
+      autoTranslateIncomingMessages:
+          autoTranslateIncomingMessages ?? this.autoTranslateIncomingMessages,
+      translationTargetLanguageCode: translationTargetLanguageCode == _unset
+          ? this.translationTargetLanguageCode
+          : translationTargetLanguageCode as String?,
+      composerTranslationEnabled:
+          composerTranslationEnabled ?? this.composerTranslationEnabled,
+      translationModelSourceUrl: translationModelSourceUrl == _unset
+          ? this.translationModelSourceUrl
+          : translationModelSourceUrl as String?,
+      translationSelectedModelId: translationSelectedModelId == _unset
+          ? this.translationSelectedModelId
+          : translationSelectedModelId as String?,
+      translationDownloadedModels:
+          translationDownloadedModels ?? this.translationDownloadedModels,
+      cyr2latProfiles: cyr2latProfiles ?? this.cyr2latProfiles,
+      selectedCyr2latProfileId:
+          selectedCyr2latProfileId ?? this.selectedCyr2latProfileId,
     );
   }
 }

lib/models/channel.dart

@@ -4,6 +4,9 @@ import 'dart:typed_data';
 import 'package:crypto/crypto.dart' as crypto;
 
 import '../connector/meshcore_protocol.dart';
+import 'community.dart';
+
+enum ChannelType { public, private, hashtag, communityPublic, communityHashtag }
 
 class Channel {
   final int index;
@@ -24,20 +27,23 @@ class Channel {
 
   bool get isPublicChannel => pskHex == publicChannelPsk;
 
-  static Channel? fromFrame(Uint8List data) {
+  static Channel? fromFrame(Uint8List frame) {
     // CHANNEL_INFO format:
     // [0] = RESP_CODE_CHANNEL_INFO (18)
     // [1] = channel_idx
     // [2-33] = name (32 bytes, null-terminated)
     // [34-49] = psk (16 bytes)
-    if (data.length < 50) return null;
-    if (data[0] != respCodeChannelInfo) return null;
-
-    final index = data[1];
-    final name = readCString(data, 2, 32);
-    final psk = Uint8List.fromList(data.sublist(34, 50));
-
-    return Channel(index: index, name: name, psk: psk);
+    if (frame.length < 50) return null;
+    final reader = BufferReader(frame);
+    try {
+      if (reader.readByte() != respCodeChannelInfo) return null;
+      final index = reader.readByte();
+      final name = reader.readCStringGreedy(32);
+      final psk = reader.readBytes(16);
+      return Channel(index: index, name: name, psk: psk);
+    } catch (e) {
+      return null;
+    }
   }
 
   static Channel empty(int index) {
@@ -108,5 +114,36 @@ class Channel {
     return bytes.map((b) => b.toRadixString(16).padLeft(2, '0')).join();
   }
 
+  static bool isCommunityChannel(ChannelType channelType) {
+    switch (channelType) {
+      case ChannelType.communityPublic:
+      case ChannelType.communityHashtag:
+        return true;
+      case ChannelType.public:
+      case ChannelType.private:
+      case ChannelType.hashtag:
+        return false;
+    }
+  }
+
+  static ChannelType getChannelType(
+    Channel channel,
+    CommunityPskIndex communityIndex,
+  ) {
+    Community? community = communityIndex.getCommunityForChannel(channel);
+    if (community != null) {
+      if (Community.isCommunityPublicChannel(channel, community)) {
+        return ChannelType.communityPublic;
+      }
+      return ChannelType.communityHashtag;
+    }
+    if (channel.isPublicChannel) {
+      return ChannelType.public;
+    } else if (channel.name.startsWith('#')) {
+      return ChannelType.hashtag;
+    }
+    return ChannelType.private;
+  }
+
   static const String publicChannelPsk = '8b3387e9c5cdea6ac9e5edbaa115cd72';
 }

lib/models/channel_message.dart

@@ -2,6 +2,8 @@ import 'dart:typed_data';
 import '../connector/meshcore_protocol.dart';
 import '../helpers/reaction_helper.dart';
 import '../helpers/smaz.dart';
+import 'translation_support.dart';
+import '../utils/app_logger.dart';
 
 enum ChannelMessageStatus { pending, sent, failed }
 
@@ -23,9 +25,16 @@ class Repeat {
 }
 
 class ChannelMessage {
+  static const Object _unset = Object();
+
   final Uint8List? senderKey;
   final String senderName;
   final String text;
+  final String? originalText;
+  final String? translatedText;
+  final String? translatedLanguageCode;
+  final MessageTranslationStatus translationStatus;
+  final String? translationModelId;
   final DateTime timestamp;
   final bool isOutgoing;
   final ChannelMessageStatus status;
@@ -36,6 +45,7 @@ class ChannelMessage {
   final List<Uint8List> pathVariants;
   final int? channelIndex;
   final String messageId;
+  final String? packetHash;
   final String? replyToMessageId;
   final String? replyToSenderName;
   final String? replyToText;
@@ -45,6 +55,11 @@ class ChannelMessage {
     this.senderKey,
     required this.senderName,
     required this.text,
+    this.originalText,
+    this.translatedText,
+    this.translatedLanguageCode,
+    this.translationStatus = MessageTranslationStatus.none,
+    this.translationModelId,
     required this.timestamp,
     required this.isOutgoing,
     this.status = ChannelMessageStatus.pending,
@@ -55,6 +70,7 @@ class ChannelMessage {
     List<Uint8List>? pathVariants,
     this.channelIndex,
     String? messageId,
+    this.packetHash,
     this.replyToMessageId,
     this.replyToSenderName,
     this.replyToText,
@@ -79,15 +95,34 @@ class ChannelMessage {
     int? pathLength,
     Uint8List? pathBytes,
     List<Uint8List>? pathVariants,
+    String? packetHash,
     String? replyToMessageId,
     String? replyToSenderName,
     String? replyToText,
+    Object? originalText = _unset,
+    Object? translatedText = _unset,
+    Object? translatedLanguageCode = _unset,
+    MessageTranslationStatus? translationStatus,
+    Object? translationModelId = _unset,
     Map<String, int>? reactions,
   }) {
     return ChannelMessage(
       senderKey: senderKey,
       senderName: senderName,
       text: text,
+      originalText: originalText == _unset
+          ? this.originalText
+          : originalText as String?,
+      translatedText: translatedText == _unset
+          ? this.translatedText
+          : translatedText as String?,
+      translatedLanguageCode: translatedLanguageCode == _unset
+          ? this.translatedLanguageCode
+          : translatedLanguageCode as String?,
+      translationStatus: translationStatus ?? this.translationStatus,
+      translationModelId: translationModelId == _unset
+          ? this.translationModelId
+          : translationModelId as String?,
       timestamp: timestamp,
       isOutgoing: isOutgoing,
       status: status ?? this.status,
@@ -98,6 +133,7 @@ class ChannelMessage {
       pathVariants: pathVariants ?? this.pathVariants,
       channelIndex: channelIndex,
       messageId: messageId,
+      packetHash: packetHash ?? this.packetHash,
       replyToMessageId: replyToMessageId ?? this.replyToMessageId,
       replyToSenderName: replyToSenderName ?? this.replyToSenderName,
       replyToText: replyToText ?? this.replyToText,
@@ -105,100 +141,99 @@ class ChannelMessage {
     );
   }
 
-  static ChannelMessage? fromFrame(Uint8List data) {
+  static ChannelMessage? fromFrame(Uint8List frame) {
     // CHANNEL_MSG_RECV format varies by version:
     // V3: [0]=code [1]=SNR [2]=rsv1 [3]=rsv2 [4]=channel_idx [5]=path_len [path... optional] [txt_type] [timestamp x4] [text...]
     // Non-V3: [0]=code [1]=channel_idx [2]=path_len [3]=txt_type [4-7]=timestamp [8+]=text
-    if (data.length < 8) return null;
+    if (frame.length < 8) return null;
+    try {
+      final reader = BufferReader(frame);
+      final code = reader.readByte();
+      if (code != respCodeChannelMsgRecv && code != respCodeChannelMsgRecvV3) {
+        return null;
+      }
 
-    final code = data[0];
-    if (code != respCodeChannelMsgRecv && code != respCodeChannelMsgRecvV3) {
+      int pathLen;
+      int txtType;
+      Uint8List pathBytes = Uint8List(0);
+      int channelIdx;
+      if (code == respCodeChannelMsgRecvV3) {
+        reader.skipBytes(1); // Skip SNR
+        final flags = reader.readByte();
+        final hasPath = (flags & 0x01) != 0;
+        reader.skipBytes(1); // Skip reserved byte
+        channelIdx = reader.readByte();
+        pathLen = reader.readInt8();
+        txtType = reader.readByte();
+        if (hasPath && pathLen > 0) {
+          reader.rewind(); // Rewind to read path length again for pathBytes
+          pathBytes = reader.readBytes(pathLen);
+        }
+      } else {
+        channelIdx = reader.readByte();
+        pathLen = reader.readInt8();
+        txtType = reader.readByte();
+      }
+      final timestampRaw = reader.readUInt32LE();
+
+      if (txtType != txtTypePlain) {
+        return null;
+      }
+
+      final text = reader.readCString();
+
+      // Extract sender name and actual message from "name: msg" format
+      String senderName = 'Unknown';
+      String actualText = text;
+
+      final colonIndex = text.indexOf(':');
+      if (colonIndex > 0 && colonIndex < text.length - 1 && colonIndex < 50) {
+        final potentialSender = text.substring(0, colonIndex);
+        if (!RegExp(r'[:\[\]]').hasMatch(potentialSender)) {
+          senderName = potentialSender;
+          final offset =
+              (colonIndex + 1 < text.length && text[colonIndex + 1] == ' ')
+              ? colonIndex + 2
+              : colonIndex + 1;
+          actualText = text.substring(offset);
+        }
+      }
+
+      final decodedText = Smaz.tryDecodePrefixed(actualText) ?? actualText;
+
+      return ChannelMessage(
+        senderKey: null,
+        senderName: senderName,
+        text: decodedText,
+        timestamp: DateTime.fromMillisecondsSinceEpoch(timestampRaw * 1000),
+        isOutgoing: false,
+        status: ChannelMessageStatus.sent,
+        pathLength: pathLen,
+        pathBytes: pathBytes,
+        channelIndex: channelIdx,
+      );
+    } catch (e) {
+      appLogger.error('Error parsing channel message frame: $e');
+      // If parsing fails, return null to avoid crashes
       return null;
     }
-
-    int timestampOffset, textOffset, pathLenOffset, txtTypeOffset;
-    Uint8List pathBytes = Uint8List(0);
-    int channelIdx;
-
-    if (code == respCodeChannelMsgRecvV3) {
-      channelIdx = data[4];
-      pathLenOffset = 5;
-      final pathLen = data[pathLenOffset].toSigned(8);
-      var cursor = 6;
-      final hasPathBytesFlag = (data[2] & 0x01) != 0;
-      final canFitPath = pathLen > 0 && data.length >= cursor + pathLen + 5;
-      final hasValidTxtType =
-          cursor < data.length &&
-          (data[cursor] == txtTypePlain || data[cursor] == txtTypeCliData);
-      if ((hasPathBytesFlag || (canFitPath && !hasValidTxtType)) &&
-          canFitPath) {
-        pathBytes = Uint8List.fromList(data.sublist(cursor, cursor + pathLen));
-        cursor += pathLen;
-      }
-      txtTypeOffset = cursor;
-      cursor += 1; // txt_type
-      timestampOffset = cursor;
-      textOffset = cursor + 4;
-    } else {
-      channelIdx = data[1];
-      pathLenOffset = 2;
-      txtTypeOffset = 3;
-      timestampOffset = 4;
-      textOffset = 8;
-    }
-
-    if (data.length < textOffset + 1) return null;
-
-    final txtType = data[txtTypeOffset];
-    if (txtType != txtTypePlain) {
-      return null;
-    }
-
-    final pathLen = data[pathLenOffset].toSigned(8);
-    final timestampRaw = readUint32LE(data, timestampOffset);
-    final text = readCString(data, textOffset, data.length - textOffset);
-
-    // Extract sender name and actual message from "name: msg" format
-    String senderName = 'Unknown';
-    String actualText = text;
-
-    final colonIndex = text.indexOf(':');
-    if (colonIndex > 0 && colonIndex < text.length - 1 && colonIndex < 50) {
-      final potentialSender = text.substring(0, colonIndex);
-      if (!RegExp(r'[:\[\]]').hasMatch(potentialSender)) {
-        senderName = potentialSender;
-        final offset =
-            (colonIndex + 1 < text.length && text[colonIndex + 1] == ' ')
-            ? colonIndex + 2
-            : colonIndex + 1;
-        actualText = text.substring(offset);
-      }
-    }
-
-    final decodedText = Smaz.tryDecodePrefixed(actualText) ?? actualText;
-
-    return ChannelMessage(
-      senderKey: null,
-      senderName: senderName,
-      text: decodedText,
-      timestamp: DateTime.fromMillisecondsSinceEpoch(timestampRaw * 1000),
-      isOutgoing: false,
-      status: ChannelMessageStatus.sent,
-      pathLength: pathLen,
-      pathBytes: pathBytes,
-      channelIndex: channelIdx,
-    );
   }
 
   static ChannelMessage outgoing(
     String text,
     String senderName,
-    int channelIndex,
-  ) {
+    int channelIndex, {
+    String? originalText,
+    String? translatedLanguageCode,
+    String? translationModelId,
+  }) {
     return ChannelMessage(
       senderKey: null,
       senderName: senderName,
       text: text,
+      originalText: originalText,
+      translatedLanguageCode: translatedLanguageCode,
+      translationModelId: translationModelId,
       timestamp: DateTime.now(),
       isOutgoing: true,
       status: ChannelMessageStatus.pending,

lib/models/community.dart

@@ -4,6 +4,8 @@ import 'dart:typed_data';
 
 import 'package:crypto/crypto.dart' as crypto;
 
+import 'channel.dart';
+
 /// Represents a community with a shared secret for deriving channel PSKs.
 ///
 /// A Community is a namespace with a shared secret K (32 random bytes),
@@ -162,6 +164,12 @@ class Community {
     return hashtag.replaceFirst(RegExp(r'^#'), '').toLowerCase().trim();
   }
 
+  /// Returns true if this is the community's public channel
+  static bool isCommunityPublicChannel(Channel channel, Community community) {
+    final publicPsk = community.deriveCommunityPublicPsk();
+    return channel.pskHex == Channel.formatPskHex(publicPsk);
+  }
+
   /// Add a hashtag channel to this community's list
   Community addHashtagChannel(String hashtag) {
     final normalized = _normalizeCommunityHashtag(hashtag);
@@ -237,3 +245,28 @@ class Community {
   @override
   int get hashCode => id.hashCode;
 }
+
+class CommunityPskIndex {
+  // Cache of PSK hex -> Community for quick lookup
+  final Map<String, Community> _pskToCommunity = {};
+
+  void initialize(List<Community> communities) {
+    _pskToCommunity.clear();
+    for (final community in communities) {
+      // Map the community public channel PSK
+      final publicPsk = community.deriveCommunityPublicPsk();
+      _pskToCommunity[Channel.formatPskHex(publicPsk)] = community;
+
+      // Map all known hashtag channel PSKs
+      for (final hashtag in community.hashtagChannels) {
+        final hashtagPsk = community.deriveCommunityHashtagPsk(hashtag);
+        _pskToCommunity[Channel.formatPskHex(hashtagPsk)] = community;
+      }
+    }
+  }
+
+  /// Returns the community this channel belongs to, or null if not a community channel
+  Community? getCommunityForChannel(Channel channel) {
+    return _pskToCommunity[channel.pskHex];
+  }
+}

lib/models/companion_radio_stats.dart

@@ -0,0 +1,48 @@
+import 'dart:typed_data';
+
+import '../connector/meshcore_protocol.dart';
+import '../utils/app_logger.dart';
+
+/// Parsed `RESP_CODE_STATS` + `STATS_TYPE_RADIO` (14 bytes total).
+class CompanionRadioStats {
+  final int noiseFloorDbm;
+  final int lastRssiDbm;
+  final double lastSnrDb;
+  final int txAirSecs;
+  final int rxAirSecs;
+  final DateTime receivedAt;
+
+  const CompanionRadioStats({
+    required this.noiseFloorDbm,
+    required this.lastRssiDbm,
+    required this.lastSnrDb,
+    required this.txAirSecs,
+    required this.rxAirSecs,
+    required this.receivedAt,
+  });
+
+  static CompanionRadioStats? tryParse(Uint8List frame) {
+    if (frame.length < 14) return null;
+    if (frame[0] != respCodeStats || frame[1] != statsTypeRadio) return null;
+    try {
+      final reader = BufferReader(frame);
+      reader.skipBytes(2);
+      final noise = reader.readInt16LE();
+      final rssi = reader.readInt8();
+      final snrRaw = reader.readInt8();
+      final txAir = reader.readUInt32LE();
+      final rxAir = reader.readUInt32LE();
+      return CompanionRadioStats(
+        noiseFloorDbm: noise,
+        lastRssiDbm: rssi,
+        lastSnrDb: snrRaw / 4.0,
+        txAirSecs: txAir,
+        rxAirSecs: rxAir,
+        receivedAt: DateTime.now(),
+      );
+    } catch (e) {
+      appLogger.warn('CompanionRadioStats parse error: $e');
+      return null;
+    }
+  }
+}

lib/models/contact.dart

@@ -17,7 +17,9 @@ class Contact {
   final double? longitude;
   final DateTime lastSeen;
   final DateTime lastMessageAt;
+  final DateTime? lastModified;
   final bool isActive;
+  final bool wasPulled;
   final Uint8List? rawPacket;
 
   Contact({
@@ -32,14 +34,19 @@ class Contact {
     this.latitude,
     this.longitude,
     required this.lastSeen,
+    this.lastModified,
     DateTime? lastMessageAt,
     this.isActive = true,
+    this.wasPulled = false,
     this.rawPacket,
   }) : lastMessageAt = lastMessageAt ?? lastSeen;
 
   String get publicKeyHex => pubKeyToHex(publicKey);
 
-  String get typeLabel {
+  /// Non-localized type label, intended for logs and non-UI exports
+  /// (e.g. GPX). For UI use the `typeLabel(l10n)` extension in
+  /// `lib/l10n/contact_localization.dart`.
+  String get typeLabelRaw {
     switch (type) {
       case advTypeChat:
         return 'Chat';
@@ -54,18 +61,17 @@ class Contact {
     }
   }
 
-  String get pathLabel {
-    if (pathOverride != null) {
-      if (pathOverride! < 0) return 'Flood (forced)';
-      if (pathOverride == 0) return 'Direct (forced)';
-      return '$pathOverride hops (forced)';
-    }
-    if (pathLength < 0) return 'Flood';
-    if (pathLength == 0) return 'Direct';
-    return '$pathLength hops';
+  bool get hasLocation {
+    const double epsilon = 1e-6;
+    final lat = latitude ?? 0.0;
+    final lon = longitude ?? 0.0;
+    return (lat.abs() > epsilon || lon.abs() > epsilon) &&
+        lat >= -90.0 &&
+        lat <= 90.0 &&
+        lon >= -180.0 &&
+        lon <= 180.0;
   }
 
-  bool get hasLocation => latitude != null && longitude != null;
   bool get isFavorite => (flags & contactFlagFavorite) != 0;
 
   Contact copyWith({
@@ -82,6 +88,7 @@ class Contact {
     double? longitude,
     DateTime? lastSeen,
     DateTime? lastMessageAt,
+    DateTime? lastModified,
     bool? isActive,
     Uint8List? rawPacket,
   }) {
@@ -102,20 +109,20 @@ class Contact {
       longitude: longitude ?? this.longitude,
       lastSeen: lastSeen ?? this.lastSeen,
       lastMessageAt: lastMessageAt ?? this.lastMessageAt,
+      lastModified: lastModified ?? this.lastModified,
       isActive: isActive ?? this.isActive,
       rawPacket: rawPacket ?? this.rawPacket,
     );
   }
 
-  String get pathIdList {
-    final pathBytes = _pathBytesForDisplay;
+  /// Formats path bytes into comma-separated hex groups of [hashByteWidth] bytes.
+  String pathFormattedIdList(int hashByteWidth) {
+    final pathBytes = pathBytesForDisplay;
     if (pathBytes.isEmpty) return '';
+    final w = hashByteWidth.clamp(1, 8);
     final parts = <String>[];
-    final groupSize = pathHashSize;
-    for (int i = 0; i < pathBytes.length; i += groupSize) {
-      final end = (i + groupSize) <= pathBytes.length
-          ? (i + groupSize)
-          : pathBytes.length;
+    for (int i = 0; i < pathBytes.length; i += w) {
+      final end = (i + w) <= pathBytes.length ? (i + w) : pathBytes.length;
       final chunk = pathBytes.sublist(i, end);
       parts.add(
         chunk
@@ -126,47 +133,14 @@ class Contact {
     return parts.join(',');
   }
 
+  /// Default grouping uses legacy single-byte hop hash width.
+  String get pathIdList => pathFormattedIdList(pathHashSize);
+
   String get shortPubKeyHex {
     return "<${publicKeyHex.substring(0, 8)}...${publicKeyHex.substring(publicKeyHex.length - 8)}>";
   }
 
-  Uint8List? get traceRouteBytes {
-    final pathBytes = _pathBytesForDisplay;
-    Uint8List? traceBytes;
-
-    if (pathBytes.isEmpty) {
-      traceBytes = Uint8List(1);
-      traceBytes[0] = publicKey[0];
-      return traceBytes;
-    }
-
-    if (type == advTypeRepeater || type == advTypeRoom) {
-      final len = (pathBytes.length + pathBytes.length + 1);
-      traceBytes = Uint8List(len);
-      traceBytes[pathBytes.length] = publicKey[0];
-      for (int i = 0; i < pathBytes.length; i++) {
-        traceBytes[i] = pathBytes[i];
-        if (i < pathBytes.length) {
-          traceBytes[len - 1 - i] = pathBytes[i];
-        }
-      }
-    } else {
-      if (pathBytes.length < 2) {
-        return pathBytes[0] == 0 ? null : pathBytes;
-      }
-      final len = (pathBytes.length + pathBytes.length - 1);
-      traceBytes = Uint8List(len);
-      for (int i = 0; i < pathBytes.length; i++) {
-        traceBytes[i] = pathBytes[i];
-        if (i < pathBytes.length - 1) {
-          traceBytes[len - 1 - i] = pathBytes[i];
-        }
-      }
-    }
-    return traceBytes;
-  }
-
-  Uint8List get _pathBytesForDisplay {
+  Uint8List get pathBytesForDisplay {
     if (pathOverride != null) {
       if (pathOverride! < 0) return Uint8List(0);
       return pathOverrideBytes ?? Uint8List(0);
@@ -183,6 +157,12 @@ class Contact {
         return null;
       }
       final pubKey = reader.readBytes(pubKeySize);
+
+      // Guard: reject contacts with zeroed or mostly-zeroed public keys
+      // (indicates corrupt flash storage on the firmware side)
+      final zeroCount = pubKey.where((b) => b == 0).length;
+      if (zeroCount > pubKeySize ~/ 2) return null;
+
       final type = reader.readByte();
       final flags = reader.readByte();
       final pathLen = reader.readByte();
@@ -192,14 +172,40 @@ class Contact {
       final pathBytes = reader.readBytes(maxPathSize).sublist(0, safePathLen);
       final name = reader.readCStringGreedy(maxNameSize);
 
-      final lastMod = reader.readUInt32LE();
+      // Guard: reject contacts with non-printable names (corrupt flash data)
+      if (name.isNotEmpty &&
+          name.codeUnits.every((c) => c < 0x20 || c == 0xFFFD)) {
+        return null;
+      }
+
+      // mandatory last_advert_timestamp
+      final lastAdvertTimestamp = reader.readUInt32LE();
 
       double? lat, lon;
-      final latRaw = reader.readInt32LE();
-      final lonRaw = reader.readInt32LE();
-      if (latRaw != 0 || lonRaw != 0) {
-        lat = latRaw / 1e6;
-        lon = lonRaw / 1e6;
+      DateTime? lastModified;
+      if (reader.remaining >= 12) {
+        final latRaw = reader.readInt32LE();
+        final lonRaw = reader.readInt32LE();
+        final lastModRaw = reader.readUInt32LE();
+        // TODO: should this be &&?
+        if (latRaw != 0 || lonRaw != 0) {
+          lat = latRaw / 1e6;
+          lon = lonRaw / 1e6;
+        }
+        if (lastModRaw != 0) {
+          lastModified = DateTime.fromMillisecondsSinceEpoch(lastModRaw * 1000);
+        }
+      } else if (reader.remaining >= 8) {
+        // Old layout: gps without lastmod
+        final latRaw = reader.readInt32LE();
+        final lonRaw = reader.readInt32LE();
+        if (latRaw != 0 || lonRaw != 0) {
+          lat = latRaw / 1e6;
+          lon = lonRaw / 1e6;
+        }
+        appLogger.info(
+          'Contact ${pubKeyToHex(pubKey).substring(0, 8)} has gps but no lastmod (legacy firmware layout)',
+        );
       }
 
       return Contact(
@@ -207,11 +213,14 @@ class Contact {
         name: name.isEmpty ? 'Unknown' : name,
         type: type,
         flags: flags,
-        pathLength: pathLen > 0 ? (pathLen > maxPathSize ? -1 : pathLen) : -1,
+        pathLength: (pathLen == 0xFF || pathLen > maxPathSize) ? -1 : pathLen,
         path: pathBytes,
         latitude: lat,
         longitude: lon,
-        lastSeen: DateTime.fromMillisecondsSinceEpoch(lastMod * 1000),
+        lastSeen: DateTime.fromMillisecondsSinceEpoch(
+          lastAdvertTimestamp * 1000,
+        ),
+        lastModified: lastModified,
         isActive: true,
         rawPacket: null,
       );
@@ -227,4 +236,7 @@ class Contact {
 
   @override
   int get hashCode => publicKeyHex.hashCode;
+  bool get teleBaseEnabled => (flags & contactFlagTeleBase) != 0;
+  bool get teleLocEnabled => (flags & contactFlagTeleLoc) != 0;
+  bool get teleEnvEnabled => (flags & contactFlagTeleEnv) != 0;
 }

lib/models/delivery_observation.dart

@@ -0,0 +1,43 @@
+class DeliveryObservation {
+  final String contactKey;
+  final int pathLength;
+  final int messageBytes;
+  final int secondsSinceLastRx;
+  final bool isFlood;
+  final int deliveryMs;
+  final DateTime timestamp;
+
+  DeliveryObservation({
+    required this.contactKey,
+    required this.pathLength,
+    required this.messageBytes,
+    required this.secondsSinceLastRx,
+    required this.isFlood,
+    required this.deliveryMs,
+    required this.timestamp,
+  });
+
+  Map<String, dynamic> toJson() {
+    return {
+      'contact_key': contactKey,
+      'path_length': pathLength,
+      'message_bytes': messageBytes,
+      'seconds_since_last_rx': secondsSinceLastRx,
+      'is_flood': isFlood,
+      'delivery_ms': deliveryMs,
+      'timestamp': timestamp.toIso8601String(),
+    };
+  }
+
+  factory DeliveryObservation.fromJson(Map<String, dynamic> json) {
+    return DeliveryObservation(
+      contactKey: json['contact_key'] as String,
+      pathLength: json['path_length'] as int,
+      messageBytes: json['message_bytes'] as int,
+      secondsSinceLastRx: json['seconds_since_last_rx'] as int? ?? 0,
+      isFlood: json['is_flood'] as bool,
+      deliveryMs: json['delivery_ms'] as int,
+      timestamp: DateTime.parse(json['timestamp'] as String),
+    );
+  }
+}

lib/models/display_path.dart

@@ -0,0 +1,69 @@
+import 'dart:ui';
+
+import 'package:latlong2/latlong.dart';
+
+import 'path_history.dart';
+
+/// One observed route rendered on the path map — the live traced path
+/// (primary) or an alternate from the contact's path history — resolved to
+/// map coordinates with per-hop confidence flags.
+class DisplayPath {
+  final String id;
+  final String label;
+  final Color color;
+  final bool isPrimary;
+
+  /// Outbound hop bytes, including hops that could not be placed on the map.
+  final List<int> hopBytes;
+
+  /// Resolved map points: self, each locatable hop, then the target when its
+  /// position is known. Hops with no position are skipped here but still
+  /// counted in [unresolvedHops].
+  final List<LatLng> points;
+
+  /// Display name for each entry of [points].
+  final List<String> pointLabels;
+
+  /// Whether each entry of [points] is a GPS-grade position (vs inferred).
+  final List<bool> pointConfirmed;
+
+  /// Per segment (length points-1): true when either endpoint is inferred or
+  /// unlocatable hops were skipped in between — rendered dashed.
+  final List<bool> segmentEstimated;
+
+  /// Per segment: the transmission ordinal of the segment's destination,
+  /// used to highlight the matching hop-list row during animation.
+  final List<int> rowForSegment;
+
+  /// Total transmissions on the full route (including unlocatable hops).
+  final int totalTransmissions;
+
+  /// True when the route ends with a chat-target endpoint row.
+  final bool hasTargetEndpoint;
+
+  final int gpsConfirmedHops;
+  final int unresolvedHops;
+  final double distanceMeters;
+
+  /// History metadata; null for the live traced (primary) path.
+  final PathRecord? record;
+
+  const DisplayPath({
+    required this.id,
+    required this.label,
+    required this.color,
+    required this.isPrimary,
+    required this.hopBytes,
+    required this.points,
+    required this.pointLabels,
+    required this.pointConfirmed,
+    required this.segmentEstimated,
+    required this.rowForSegment,
+    required this.totalTransmissions,
+    required this.hasTargetEndpoint,
+    required this.gpsConfirmedHops,
+    required this.unresolvedHops,
+    required this.distanceMeters,
+    this.record,
+  });
+}

lib/models/message.dart

@@ -1,28 +1,37 @@
 import 'dart:typed_data';
 import '../connector/meshcore_protocol.dart';
 import '../helpers/reaction_helper.dart';
+import 'translation_support.dart';
 
 enum MessageStatus { pending, sent, delivered, failed }
 
 class Message {
+  static const Object _unset = Object();
+
   final Uint8List senderKey;
   final String text;
   final DateTime timestamp;
   final bool isOutgoing;
   final bool isCli;
   final MessageStatus status;
+  final String? originalText;
+  final String? translatedText;
+  final String? translatedLanguageCode;
+  final MessageTranslationStatus translationStatus;
+  final String? translationModelId;
 
   // NEW: Retry logic fields
-  final String? messageId;
+  final String messageId;
   final int retryCount;
   final int? estimatedTimeoutMs;
-  final Uint8List? expectedAckHash;
+  final int? expectedAckHash;
   final DateTime? sentAt;
   final DateTime? deliveredAt;
   final int? tripTimeMs;
   final int? pathLength;
   final Uint8List pathBytes;
   final Map<String, int> reactions;
+  final Map<String, MessageStatus> reactionStatuses;
   final Uint8List fourByteRoomContactKey;
 
   Message({
@@ -32,7 +41,12 @@ class Message {
     required this.isOutgoing,
     this.isCli = false,
     this.status = MessageStatus.pending,
-    this.messageId,
+    String? messageId,
+    this.originalText,
+    this.translatedText,
+    this.translatedLanguageCode,
+    this.translationStatus = MessageTranslationStatus.none,
+    this.translationModelId,
     this.retryCount = 0,
     this.estimatedTimeoutMs,
     this.expectedAckHash,
@@ -43,9 +57,14 @@ class Message {
     Uint8List? pathBytes,
     Uint8List? fourByteRoomContactKey,
     Map<String, int>? reactions,
-  }) : pathBytes = pathBytes ?? Uint8List(0),
+    Map<String, MessageStatus>? reactionStatuses,
+  }) : messageId =
+           messageId ??
+           '${timestamp.millisecondsSinceEpoch}_${pubKeyToHex(senderKey)}_${text.hashCode}',
+       pathBytes = pathBytes ?? Uint8List(0),
        fourByteRoomContactKey = fourByteRoomContactKey ?? Uint8List(0),
-       reactions = reactions ?? {};
+       reactions = reactions ?? {},
+       reactionStatuses = reactionStatuses ?? {};
 
   String get senderKeyHex => pubKeyToHex(senderKey);
 
@@ -53,14 +72,20 @@ class Message {
     MessageStatus? status,
     int? retryCount,
     int? estimatedTimeoutMs,
-    Uint8List? expectedAckHash,
+    int? expectedAckHash,
     DateTime? sentAt,
     DateTime? deliveredAt,
     int? tripTimeMs,
     int? pathLength,
     Uint8List? pathBytes,
     bool? isCli,
+    Object? originalText = _unset,
+    Object? translatedText = _unset,
+    Object? translatedLanguageCode = _unset,
+    MessageTranslationStatus? translationStatus,
+    Object? translationModelId = _unset,
     Map<String, int>? reactions,
+    Map<String, MessageStatus>? reactionStatuses,
     Uint8List? fourByteRoomContactKey,
   }) {
     return Message(
@@ -71,6 +96,19 @@ class Message {
       isCli: isCli ?? this.isCli,
       status: status ?? this.status,
       messageId: messageId,
+      originalText: originalText == _unset
+          ? this.originalText
+          : originalText as String?,
+      translatedText: translatedText == _unset
+          ? this.translatedText
+          : translatedText as String?,
+      translatedLanguageCode: translatedLanguageCode == _unset
+          ? this.translatedLanguageCode
+          : translatedLanguageCode as String?,
+      translationStatus: translationStatus ?? this.translationStatus,
+      translationModelId: translationModelId == _unset
+          ? this.translationModelId
+          : translationModelId as String?,
       retryCount: retryCount ?? this.retryCount,
       estimatedTimeoutMs: estimatedTimeoutMs ?? this.estimatedTimeoutMs,
       expectedAckHash: expectedAckHash ?? this.expectedAckHash,
@@ -80,49 +118,58 @@ class Message {
       pathLength: pathLength ?? this.pathLength,
       pathBytes: pathBytes ?? this.pathBytes,
       reactions: reactions ?? this.reactions,
+      reactionStatuses: reactionStatuses ?? this.reactionStatuses,
       fourByteRoomContactKey:
           fourByteRoomContactKey ?? this.fourByteRoomContactKey,
     );
   }
 
-  static Message? fromFrame(Uint8List data, Uint8List selfPubKey) {
-    if (data.length < msgTextOffset + 1) return null;
+  static Message? fromFrame(Uint8List frame, Uint8List selfPubKey) {
+    if (frame.length < msgTextOffset + 1) return null;
+    final reader = BufferReader(frame);
+    try {
+      final code = reader.readByte();
+      if (code != respCodeContactMsgRecv && code != respCodeContactMsgRecvV3) {
+        return null;
+      }
 
-    final code = data[0];
-    if (code != respCodeContactMsgRecv && code != respCodeContactMsgRecvV3) {
+      final senderKey = reader.readBytes(pubKeySize);
+      final timestampRaw = reader.readInt32LE();
+      final flags = reader.readByte();
+      if ((flags >> 2) != txtTypePlain) {
+        return null;
+      }
+      final text = reader.readCString();
+
+      return Message(
+        senderKey: senderKey,
+        text: text,
+        timestamp: DateTime.fromMillisecondsSinceEpoch(timestampRaw * 1000),
+        isOutgoing: false,
+        isCli: false,
+        status: MessageStatus.delivered,
+        pathBytes: Uint8List(0),
+      );
+    } catch (e) {
       return null;
     }
-
-    final senderKey = Uint8List.fromList(
-      data.sublist(msgPubKeyOffset, msgPubKeyOffset + pubKeySize),
-    );
-    final timestampRaw = readUint32LE(data, msgTimestampOffset);
-    final flags = data[msgFlagsOffset];
-    if ((flags >> 2) != txtTypePlain) {
-      return null;
-    }
-    final text = readCString(data, msgTextOffset, data.length - msgTextOffset);
-
-    return Message(
-      senderKey: senderKey,
-      text: text,
-      timestamp: DateTime.fromMillisecondsSinceEpoch(timestampRaw * 1000),
-      isOutgoing: false,
-      isCli: false,
-      status: MessageStatus.delivered,
-      pathBytes: Uint8List(0),
-    );
   }
 
   static Message outgoing(
     Uint8List recipientKey,
     String text, {
+    String? originalText,
+    String? translatedLanguageCode,
+    String? translationModelId,
     int? pathLength,
     Uint8List? pathBytes,
   }) {
     return Message(
       senderKey: recipientKey,
       text: text,
+      originalText: originalText,
+      translatedLanguageCode: translatedLanguageCode,
+      translationModelId: translationModelId,
       timestamp: DateTime.now(),
       isOutgoing: true,
       isCli: false,

lib/models/path_history.dart

@@ -1,11 +1,12 @@
 class PathRecord {
   final int hopCount;
   final int tripTimeMs;
-  final DateTime timestamp;
+  final DateTime? timestamp;
   final bool wasFloodDiscovery;
   final List<int> pathBytes;
   final int successCount;
   final int failureCount;
+  final double routeWeight;
 
   PathRecord({
     required this.hopCount,
@@ -15,6 +16,7 @@ class PathRecord {
     required this.pathBytes,
     required this.successCount,
     required this.failureCount,
+    this.routeWeight = 1.0,
   });
 
   String get displayText =>
@@ -24,11 +26,12 @@ class PathRecord {
     return {
       'hop_count': hopCount,
       'trip_time_ms': tripTimeMs,
-      'timestamp': timestamp.toIso8601String(),
+      'timestamp': timestamp?.toIso8601String(),
       'was_flood': wasFloodDiscovery,
       'path_bytes': pathBytes,
       'success_count': successCount,
       'failure_count': failureCount,
+      'route_weight': routeWeight,
     };
   }
 
@@ -36,12 +39,15 @@ class PathRecord {
     return PathRecord(
       hopCount: json['hop_count'] as int,
       tripTimeMs: json['trip_time_ms'] as int,
-      timestamp: DateTime.parse(json['timestamp'] as String),
+      timestamp: json['timestamp'] != null
+          ? DateTime.parse(json['timestamp'] as String)
+          : null,
       wasFloodDiscovery: json['was_flood'] as bool,
       pathBytes:
           (json['path_bytes'] as List?)?.map((b) => b as int).toList() ?? [],
       successCount: json['success_count'] as int? ?? 0,
       failureCount: json['failure_count'] as int? ?? 0,
+      routeWeight: (json['route_weight'] as num?)?.toDouble() ?? 1.0,
     );
   }
 }

lib/models/path_playback.dart

@@ -0,0 +1,177 @@
+import 'package:flutter/foundation.dart';
+import 'package:flutter/scheduler.dart';
+import 'package:latlong2/latlong.dart';
+
+/// Timeline state for the packet-flow animation on the path map.
+///
+/// The packet travels each segment over [segmentMs] (scaled by [speed]),
+/// then dwells at the reached hop for [dwellMs] so the hop visibly lights up.
+/// Overlay layers listen to this controller directly; [activeSegment] only
+/// fires when the segment index changes so list highlights rebuild cheaply.
+class PathPlaybackController extends ChangeNotifier {
+  static const double segmentMs = 1100;
+  static const double dwellMs = 380;
+  static const List<double> speedSteps = [0.5, 1.0, 2.0];
+
+  late final Ticker _ticker;
+  List<LatLng> _points = const [];
+  double _timelineMs = 0;
+  Duration _lastTick = Duration.zero;
+  bool _playing = false;
+  bool _started = false;
+  double _speed = 1.0;
+
+  /// Segment currently being traveled (clamped to the last segment), or -1
+  /// while the animation has not been started — listeners use this for
+  /// hop-list highlighting without rebuilding every tick.
+  final ValueNotifier<int> activeSegment = ValueNotifier(-1);
+
+  PathPlaybackController(TickerProvider vsync) {
+    _ticker = vsync.createTicker(_onTick);
+  }
+
+  List<LatLng> get points => _points;
+  bool get hasPath => _points.length >= 2;
+  int get segmentCount => hasPath ? _points.length - 1 : 0;
+  bool get playing => _playing;
+  double get speed => _speed;
+
+  /// True once the user has started or stepped the animation; the packet
+  /// overlay renders only in this state.
+  bool get started => _started;
+
+  double get _slotMs => segmentMs + dwellMs;
+  double get _totalMs => segmentCount * _slotMs;
+  bool get isComplete => hasPath && _timelineMs >= _totalMs;
+
+  int get currentSegment {
+    if (!hasPath) return 0;
+    return (_timelineMs / _slotMs).floor().clamp(0, segmentCount - 1);
+  }
+
+  /// Travel progress through [currentSegment]; 1.0 while dwelling at its end.
+  double get segmentProgress {
+    if (!hasPath) return 0;
+    final within = _timelineMs - currentSegment * _slotMs;
+    return (within / segmentMs).clamp(0.0, 1.0);
+  }
+
+  /// Dwell progress (0..1) at the reached hop, or null while traveling.
+  double? get dwellProgress {
+    if (!hasPath || isComplete) return null;
+    final within = _timelineMs - currentSegment * _slotMs;
+    if (within < segmentMs) return null;
+    return ((within - segmentMs) / dwellMs).clamp(0.0, 1.0);
+  }
+
+  /// Index of the point the packet has most recently reached.
+  int get reachedPointIndex {
+    if (!hasPath) return 0;
+    if (isComplete) return _points.length - 1;
+    return segmentProgress >= 1.0 ? currentSegment + 1 : currentSegment;
+  }
+
+  LatLng get position {
+    if (!hasPath) return const LatLng(0, 0);
+    final seg = currentSegment;
+    final a = _points[seg];
+    final b = _points[seg + 1];
+    final t = segmentProgress;
+    return LatLng(
+      a.latitude + (b.latitude - a.latitude) * t,
+      a.longitude + (b.longitude - a.longitude) * t,
+    );
+  }
+
+  /// Replaces the path and resets the animation to the start.
+  void setPath(List<LatLng> points) {
+    _ticker.stop();
+    _points = List.unmodifiable(points);
+    _timelineMs = 0;
+    _playing = false;
+    _started = false;
+    activeSegment.value = -1;
+    notifyListeners();
+  }
+
+  void play() {
+    if (!hasPath) return;
+    if (isComplete) _timelineMs = 0;
+    _started = true;
+    _playing = true;
+    activeSegment.value = currentSegment;
+    if (!_ticker.isActive) {
+      _lastTick = Duration.zero;
+      _ticker.start();
+    }
+    notifyListeners();
+  }
+
+  void pause() {
+    _ticker.stop();
+    _playing = false;
+    notifyListeners();
+  }
+
+  void togglePlay() => _playing ? pause() : play();
+
+  void replay() {
+    if (!hasPath) return;
+    _timelineMs = 0;
+    activeSegment.value = 0;
+    play();
+  }
+
+  /// Stops playback and hides the packet overlay.
+  void stop() {
+    _ticker.stop();
+    _playing = false;
+    _started = false;
+    _timelineMs = 0;
+    activeSegment.value = -1;
+    notifyListeners();
+  }
+
+  void stepForward() => _jumpToPoint(reachedPointIndex + 1);
+
+  void stepBack() => _jumpToPoint(reachedPointIndex - 1);
+
+  void cycleSpeed() {
+    final index = speedSteps.indexOf(_speed);
+    _speed = speedSteps[(index + 1) % speedSteps.length];
+    notifyListeners();
+  }
+
+  void _jumpToPoint(int index) {
+    if (!hasPath) return;
+    _ticker.stop();
+    _playing = false;
+    _started = true;
+    final clamped = index.clamp(0, _points.length - 1);
+    // Land at the start of the dwell window so the hop pulse plays.
+    _timelineMs = clamped == 0 ? 0 : (clamped - 1) * _slotMs + segmentMs;
+    activeSegment.value = currentSegment;
+    notifyListeners();
+  }
+
+  void _onTick(Duration elapsed) {
+    final dtMs = (elapsed - _lastTick).inMicroseconds / 1000.0;
+    _lastTick = elapsed;
+    _timelineMs = (_timelineMs + dtMs * _speed).clamp(0.0, _totalMs);
+    if (_timelineMs >= _totalMs) {
+      _ticker.stop();
+      _playing = false;
+    }
+    if (activeSegment.value != currentSegment) {
+      activeSegment.value = currentSegment;
+    }
+    notifyListeners();
+  }
+
+  @override
+  void dispose() {
+    _ticker.dispose();
+    activeSegment.dispose();
+    super.dispose();
+  }
+}

lib/models/path_selection.dart

@@ -1,3 +1,9 @@
+import 'dart:typed_data';
+
+import 'contact.dart';
+
+const int recentAttemptDiversityWindow = 2;
+
 class PathSelection {
   final List<int> pathBytes;
   final int hopCount;
@@ -9,3 +15,38 @@ class PathSelection {
     required this.useFlood,
   });
 }
+
+PathSelection resolvePathSelection(
+  Contact contact, {
+  PathSelection? selection,
+  bool forceFlood = false,
+}) {
+  if (contact.pathOverride != null) {
+    if (contact.pathOverride! < 0) {
+      return const PathSelection(pathBytes: [], hopCount: -1, useFlood: true);
+    }
+    return PathSelection(
+      pathBytes: contact.pathOverrideBytes ?? Uint8List(0),
+      hopCount: contact.pathOverride!,
+      useFlood: false,
+    );
+  }
+
+  if (forceFlood || contact.pathLength < 0 || selection?.useFlood == true) {
+    return const PathSelection(pathBytes: [], hopCount: -1, useFlood: true);
+  }
+
+  if (selection != null && selection.pathBytes.isNotEmpty) {
+    return PathSelection(
+      pathBytes: selection.pathBytes,
+      hopCount: selection.hopCount,
+      useFlood: false,
+    );
+  }
+
+  return PathSelection(
+    pathBytes: contact.path,
+    hopCount: contact.pathLength,
+    useFlood: false,
+  );
+}

lib/models/radio_settings.dart

@@ -181,6 +181,276 @@ class RadioSettings {
         txPowerDbm: 14,
       ),
     ),
+    (
+      'Russia Artyom (VVO)',
+      RadioSettings(
+        frequencyMHz: 864.281,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_6,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Biysk (BSK)',
+      RadioSettings(
+        frequencyMHz: 869.000,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_5,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Chelyabinsk (CEK)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_6,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Cherepovets (CEE)',
+      RadioSettings(
+        frequencyMHz: 868.570,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf7,
+        codingRate: LoRaCodingRate.cr4_8,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Irkutsk (IKT)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf7,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Ivanovo (IWA)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_8,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Izhevsk (IJK)',
+      RadioSettings(
+        frequencyMHz: 868.732,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_8,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Kaluga (KLF)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf7,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Kazan (KZN)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_6,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Khabarovsk (KHV)',
+      RadioSettings(
+        frequencyMHz: 864.281,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_6,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Kirov (KVX)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_8,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Lipetsk (LPK)',
+      RadioSettings(
+        frequencyMHz: 868.950,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf9,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Moscow (MOW)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf7,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Nizhny Novgorod (GOJ)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_6,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Novosibirsk (OVB)',
+      RadioSettings(
+        frequencyMHz: 869.000,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf9,
+        codingRate: LoRaCodingRate.cr4_8,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Rostov-on-Don (ROV)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf9,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Ryazan (RZN)',
+      RadioSettings(
+        frequencyMHz: 868.880,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf9,
+        codingRate: LoRaCodingRate.cr4_5,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Samara (KUF)',
+      RadioSettings(
+        frequencyMHz: 864.281,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Saratov (GSV)',
+      RadioSettings(
+        frequencyMHz: 864.281,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia St. Petersburg (LED)',
+      RadioSettings(
+        frequencyMHz: 868.856,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf7,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Tambov (TBW)',
+      RadioSettings(
+        frequencyMHz: 868.950,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf10,
+        codingRate: LoRaCodingRate.cr4_5,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Tula (TYA)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Tver (KLD)',
+      RadioSettings(
+        frequencyMHz: 869.169,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_8,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Ufa (UFA)',
+      RadioSettings(
+        frequencyMHz: 868.732,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_8,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Volgograd (VOG)',
+      RadioSettings(
+        frequencyMHz: 869.525,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf7,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Voronezh (VOZ)',
+      RadioSettings(
+        frequencyMHz: 868.731,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf8,
+        codingRate: LoRaCodingRate.cr4_6,
+        txPowerDbm: 20,
+      ),
+    ),
+    (
+      'Russia Yekaterinburg (SVX)',
+      RadioSettings(
+        frequencyMHz: 869.046,
+        bandwidth: LoRaBandwidth.bw62_5,
+        spreadingFactor: LoRaSpreadingFactor.sf7,
+        codingRate: LoRaCodingRate.cr4_7,
+        txPowerDbm: 20,
+      ),
+    ),
     (
       'Switzerland',
       RadioSettings(
@@ -228,7 +498,7 @@ class RadioSettings {
         frequencyMHz: 433.0,
         bandwidth: LoRaBandwidth.bw250,
         spreadingFactor: LoRaSpreadingFactor.sf11,
-        codingRate: LoRaCodingRate.cr4_5,
+        codingRate: LoRaCodingRate.cr4_8,
         txPowerDbm: 20,
       ),
     ),
@@ -238,7 +508,7 @@ class RadioSettings {
         frequencyMHz: 869.0,
         bandwidth: LoRaBandwidth.bw250,
         spreadingFactor: LoRaSpreadingFactor.sf11,
-        codingRate: LoRaCodingRate.cr4_5,
+        codingRate: LoRaCodingRate.cr4_8,
         txPowerDbm: 14,
       ),
     ),
@@ -248,7 +518,7 @@ class RadioSettings {
         frequencyMHz: 918.0,
         bandwidth: LoRaBandwidth.bw250,
         spreadingFactor: LoRaSpreadingFactor.sf11,
-        codingRate: LoRaCodingRate.cr4_5,
+        codingRate: LoRaCodingRate.cr4_8,
         txPowerDbm: 20,
       ),
     ),

lib/models/translation_support.dart

@@ -0,0 +1,136 @@
+enum MessageTranslationStatus { none, pending, completed, failed, skipped }
+
+extension MessageTranslationStatusValue on MessageTranslationStatus {
+  String get value {
+    switch (this) {
+      case MessageTranslationStatus.pending:
+        return 'pending';
+      case MessageTranslationStatus.completed:
+        return 'completed';
+      case MessageTranslationStatus.failed:
+        return 'failed';
+      case MessageTranslationStatus.skipped:
+        return 'skipped';
+      case MessageTranslationStatus.none:
+        return 'none';
+    }
+  }
+}
+
+MessageTranslationStatus parseMessageTranslationStatus(dynamic value) {
+  if (value is! String) {
+    return MessageTranslationStatus.none;
+  }
+  for (final status in MessageTranslationStatus.values) {
+    if (status.value == value) {
+      return status;
+    }
+  }
+  return MessageTranslationStatus.none;
+}
+
+class TranslationModelRecord {
+  final String id;
+  final String name;
+  final String sourceUrl;
+  final String localPath;
+  final DateTime downloadedAt;
+  final int fileSizeBytes;
+
+  const TranslationModelRecord({
+    required this.id,
+    required this.name,
+    required this.sourceUrl,
+    required this.localPath,
+    required this.downloadedAt,
+    required this.fileSizeBytes,
+  });
+
+  Map<String, dynamic> toJson() {
+    return {
+      'id': id,
+      'name': name,
+      'source_url': sourceUrl,
+      'local_path': localPath,
+      'downloaded_at': downloadedAt.millisecondsSinceEpoch,
+      'file_size_bytes': fileSizeBytes,
+    };
+  }
+
+  factory TranslationModelRecord.fromJson(Map<String, dynamic> json) {
+    return TranslationModelRecord(
+      id: json['id'] as String? ?? '',
+      name: json['name'] as String? ?? '',
+      sourceUrl: json['source_url'] as String? ?? '',
+      localPath: json['local_path'] as String? ?? '',
+      downloadedAt: DateTime.fromMillisecondsSinceEpoch(
+        json['downloaded_at'] as int? ?? 0,
+      ),
+      fileSizeBytes: json['file_size_bytes'] as int? ?? 0,
+    );
+  }
+}
+
+String translationModelFriendlyName(TranslationModelRecord model) {
+  switch (model.id) {
+    case 'hy-mt1.5-1.8b-q4_k_m':
+      return 'Tencent HY-MT 1.5 1.8B Q4_K_M';
+    case 'hy-mt1.5-1.8b-q6_k':
+      return 'Tencent HY-MT 1.5 1.8B Q6_K';
+    default:
+      final trimmed = model.name.trim();
+      if (trimmed.endsWith('.gguf')) {
+        return trimmed.substring(0, trimmed.length - 5);
+      }
+      return trimmed.isEmpty ? model.id : trimmed;
+  }
+}
+
+class TranslationLanguageOption {
+  final String code;
+  final String label;
+
+  const TranslationLanguageOption({required this.code, required this.label});
+}
+
+const List<TranslationLanguageOption> supportedTranslationLanguages = [
+  TranslationLanguageOption(code: 'bg', label: 'Bulgarian'),
+  TranslationLanguageOption(code: 'de', label: 'German'),
+  TranslationLanguageOption(code: 'en', label: 'English'),
+  TranslationLanguageOption(code: 'es', label: 'Spanish'),
+  TranslationLanguageOption(code: 'fr', label: 'French'),
+  TranslationLanguageOption(code: 'hu', label: 'Hungarian'),
+  TranslationLanguageOption(code: 'it', label: 'Italian'),
+  TranslationLanguageOption(code: 'ja', label: 'Japanese'),
+  TranslationLanguageOption(code: 'ko', label: 'Korean'),
+  TranslationLanguageOption(code: 'nl', label: 'Dutch'),
+  TranslationLanguageOption(code: 'pl', label: 'Polish'),
+  TranslationLanguageOption(code: 'pt', label: 'Portuguese'),
+  TranslationLanguageOption(code: 'ru', label: 'Russian'),
+  TranslationLanguageOption(code: 'sk', label: 'Slovak'),
+  TranslationLanguageOption(code: 'sl', label: 'Slovenian'),
+  TranslationLanguageOption(code: 'sv', label: 'Swedish'),
+  TranslationLanguageOption(code: 'uk', label: 'Ukrainian'),
+  TranslationLanguageOption(code: 'zh', label: 'Chinese'),
+];
+
+final List<TranslationModelRecord> translationPresetModels = [
+  TranslationModelRecord(
+    id: 'hy-mt1.5-1.8b-q4_k_m',
+    name: 'HY-MT1.5-1.8B-Q4_K_M.gguf',
+    sourceUrl:
+        'https://huggingface.co/tencent/HY-MT1.5-1.8B-GGUF/resolve/main/HY-MT1.5-1.8B-Q4_K_M.gguf?download=true',
+    localPath: '',
+    downloadedAt: DateTime.fromMillisecondsSinceEpoch(0),
+    fileSizeBytes: 0,
+  ),
+  TranslationModelRecord(
+    id: 'hy-mt1.5-1.8b-q6_k',
+    name: 'HY-MT1.5-1.8B-Q6_K.gguf',
+    sourceUrl:
+        'https://huggingface.co/tencent/HY-MT1.5-1.8B-GGUF/resolve/main/HY-MT1.5-1.8B-Q6_K.gguf?download=true',
+    localPath: '',
+    downloadedAt: DateTime.fromMillisecondsSinceEpoch(0),
+    fileSizeBytes: 0,
+  ),
+];

lib/screens/app_debug_log_screen.dart

@@ -4,7 +4,9 @@ import 'package:provider/provider.dart';
 
 import '../l10n/l10n.dart';
 import '../services/app_debug_log_service.dart';
+import '../theme/mesh_theme.dart';
 import '../widgets/adaptive_app_bar_title.dart';
+import '../helpers/snack_bar_builder.dart';
 
 class AppDebugLogScreen extends StatelessWidget {
   const AppDebugLogScreen({super.key});
@@ -34,8 +36,9 @@ class AppDebugLogScreen extends StatelessWidget {
                             .join('\n');
                         await Clipboard.setData(ClipboardData(text: text));
                         if (!context.mounted) return;
-                        ScaffoldMessenger.of(context).showSnackBar(
-                          SnackBar(content: Text(context.l10n.debugLog_copied)),
+                        showDismissibleSnackBar(
+                          context,
+                          content: Text(context.l10n.debugLog_copied),
                         );
                       }
                     : null,
@@ -56,25 +59,57 @@ class AppDebugLogScreen extends StatelessWidget {
             child: hasEntries
                 ? ListView.separated(
                     itemCount: entries.length,
-                    separatorBuilder: (_, _) => const Divider(height: 1),
+                    separatorBuilder: (_, _) =>
+                        const Divider(height: 1, color: MeshPalette.line),
                     itemBuilder: (context, index) {
                       final entry = entries[index];
-                      return ListTile(
-                        dense: true,
-                        leading: _buildLevelIcon(entry.level),
-                        title: Text(
-                          '[${entry.tag}] ${entry.message}',
-                          style: const TextStyle(
-                            fontSize: 12,
-                            fontFamily: 'monospace',
-                          ),
+                      return Container(
+                        color: MeshPalette.bg,
+                        padding: const EdgeInsets.symmetric(
+                          horizontal: 16,
+                          vertical: 8,
                         ),
-                        subtitle: Text(
-                          entry.formattedTime,
-                          style: TextStyle(
-                            fontSize: 10,
-                            color: Colors.grey[600],
-                          ),
+                        child: Row(
+                          crossAxisAlignment: CrossAxisAlignment.start,
+                          children: [
+                            _buildLevelIcon(context, entry.level),
+                            const SizedBox(width: 10),
+                            Expanded(
+                              child: Column(
+                                crossAxisAlignment: CrossAxisAlignment.start,
+                                children: [
+                                  Text.rich(
+                                    TextSpan(
+                                      children: [
+                                        TextSpan(
+                                          text: '[${entry.tag}] ',
+                                          style: MeshTheme.mono(
+                                            fontSize: 11.5,
+                                            color: _levelColor(entry.level),
+                                          ),
+                                        ),
+                                        TextSpan(
+                                          text: entry.message,
+                                          style: MeshTheme.mono(
+                                            fontSize: 11.5,
+                                            color: MeshPalette.ink2,
+                                          ),
+                                        ),
+                                      ],
+                                    ),
+                                  ),
+                                  const SizedBox(height: 2),
+                                  Text(
+                                    entry.formattedTime,
+                                    style: MeshTheme.mono(
+                                      fontSize: 9.5,
+                                      color: MeshPalette.ink4,
+                                    ),
+                                  ),
+                                ],
+                              ),
+                            ),
+                          ],
                         ),
                       );
                     },
@@ -83,25 +118,25 @@ class AppDebugLogScreen extends StatelessWidget {
                     child: Column(
                       mainAxisAlignment: MainAxisAlignment.center,
                       children: [
-                        Icon(
+                        const Icon(
                           Icons.bug_report_outlined,
                           size: 64,
-                          color: Colors.grey[400],
+                          color: MeshPalette.ink3,
                         ),
                         const SizedBox(height: 16),
                         Text(
                           context.l10n.debugLog_noEntries,
-                          style: TextStyle(
+                          style: const TextStyle(
                             fontSize: 16,
-                            color: Colors.grey[600],
+                            color: MeshPalette.ink3,
                           ),
                         ),
                         const SizedBox(height: 8),
                         Text(
                           context.l10n.debugLog_enableInSettings,
-                          style: TextStyle(
+                          style: const TextStyle(
                             fontSize: 12,
-                            color: Colors.grey[500],
+                            color: MeshPalette.ink3,
                           ),
                         ),
                       ],
@@ -113,18 +148,37 @@ class AppDebugLogScreen extends StatelessWidget {
     );
   }
 
-  Widget _buildLevelIcon(AppDebugLogLevel level) {
+  Color _levelColor(AppDebugLogLevel level) {
     switch (level) {
       case AppDebugLogLevel.info:
-        return const Icon(Icons.info_outline, size: 18, color: Colors.blue);
+        return MeshPalette.blue;
+      case AppDebugLogLevel.warning:
+        return MeshPalette.warn;
+      case AppDebugLogLevel.error:
+        return MeshPalette.alert;
+    }
+  }
+
+  Widget _buildLevelIcon(BuildContext context, AppDebugLogLevel level) {
+    switch (level) {
+      case AppDebugLogLevel.info:
+        return const Icon(
+          Icons.info_outline,
+          size: 18,
+          color: MeshPalette.blue,
+        );
       case AppDebugLogLevel.warning:
         return const Icon(
           Icons.warning_amber_outlined,
           size: 18,
-          color: Colors.orange,
+          color: MeshPalette.warn,
         );
       case AppDebugLogLevel.error:
-        return const Icon(Icons.error_outline, size: 18, color: Colors.red);
+        return const Icon(
+          Icons.error_outline,
+          size: 18,
+          color: MeshPalette.alert,
+        );
     }
   }
 }

lib/screens/ble_debug_log_screen.dart

@@ -4,7 +4,9 @@ import 'package:flutter/services.dart';
 import '../l10n/l10n.dart';
 import '../services/ble_debug_log_service.dart';
 import '../connector/meshcore_protocol.dart';
+import '../theme/mesh_theme.dart';
 import '../widgets/adaptive_app_bar_title.dart';
+import '../helpers/snack_bar_builder.dart';
 
 enum _BleLogView { frames, rawLogRx }
 
@@ -31,6 +33,7 @@ class _BleDebugLogScreenState extends State<BleDebugLogScreen> {
         return Scaffold(
           appBar: AppBar(
             title: AdaptiveAppBarTitle(context.l10n.debugLog_bleTitle),
+            centerTitle: true,
             actions: [
               IconButton(
                 tooltip: context.l10n.debugLog_copyLog,
@@ -52,10 +55,9 @@ class _BleDebugLogScreenState extends State<BleDebugLogScreen> {
                                   .join('\n');
                         await Clipboard.setData(ClipboardData(text: text));
                         if (!context.mounted) return;
-                        ScaffoldMessenger.of(context).showSnackBar(
-                          SnackBar(
-                            content: Text(context.l10n.debugLog_bleCopied),
-                          ),
+                        showDismissibleSnackBar(
+                          context,
+                          content: Text(context.l10n.debugLog_bleCopied),
                         );
                       }
                     : null,
@@ -101,23 +103,14 @@ class _BleDebugLogScreenState extends State<BleDebugLogScreen> {
                           itemCount: showingFrames
                               ? entries.length
                               : rawEntries.length,
-                          separatorBuilder: (_, _) => const Divider(height: 1),
+                          separatorBuilder: (_, _) =>
+                              const Divider(height: 1, color: MeshPalette.line),
                           itemBuilder: (context, index) {
                             if (showingFrames) {
                               final entry = entries[index];
                               final time =
                                   '${entry.timestamp.hour.toString().padLeft(2, '0')}:${entry.timestamp.minute.toString().padLeft(2, '0')}:${entry.timestamp.second.toString().padLeft(2, '0')}';
-                              return ListTile(
-                                dense: true,
-                                title: Text(entry.description),
-                                subtitle: Text('${entry.hexPreview}\n$time'),
-                                isThreeLine: true,
-                                leading: Icon(
-                                  entry.outgoing
-                                      ? Icons.upload
-                                      : Icons.download,
-                                  size: 18,
-                                ),
+                              return GestureDetector(
                                 onLongPress: () async {
                                   await Clipboard.setData(
                                     ClipboardData(
@@ -131,6 +124,60 @@ class _BleDebugLogScreenState extends State<BleDebugLogScreen> {
                                     ),
                                   );
                                 },
+                                child: Container(
+                                  color: MeshPalette.bg,
+                                  padding: const EdgeInsets.symmetric(
+                                    horizontal: 16,
+                                    vertical: 8,
+                                  ),
+                                  child: Row(
+                                    crossAxisAlignment:
+                                        CrossAxisAlignment.start,
+                                    children: [
+                                      Icon(
+                                        entry.outgoing
+                                            ? Icons.upload
+                                            : Icons.download,
+                                        size: 18,
+                                        color: entry.outgoing
+                                            ? MeshPalette.blue
+                                            : MeshPalette.signal,
+                                      ),
+                                      const SizedBox(width: 10),
+                                      Expanded(
+                                        child: Column(
+                                          crossAxisAlignment:
+                                              CrossAxisAlignment.start,
+                                          children: [
+                                            Text(
+                                              entry.description,
+                                              style: MeshTheme.mono(
+                                                fontSize: 11.5,
+                                                color: MeshPalette.ink,
+                                              ),
+                                            ),
+                                            const SizedBox(height: 2),
+                                            Text(
+                                              entry.hexPreview,
+                                              style: MeshTheme.mono(
+                                                fontSize: 10,
+                                                color: MeshPalette.ink3,
+                                              ),
+                                            ),
+                                            const SizedBox(height: 2),
+                                            Text(
+                                              time,
+                                              style: MeshTheme.mono(
+                                                fontSize: 9.5,
+                                                color: MeshPalette.ink4,
+                                              ),
+                                            ),
+                                          ],
+                                        ),
+                                      ),
+                                    ],
+                                  ),
+                                ),
                               );
                             }
 
@@ -138,18 +185,65 @@ class _BleDebugLogScreenState extends State<BleDebugLogScreen> {
                             final info = _decodeRawPacket(entry.payload);
                             final time =
                                 '${entry.timestamp.hour.toString().padLeft(2, '0')}:${entry.timestamp.minute.toString().padLeft(2, '0')}:${entry.timestamp.second.toString().padLeft(2, '0')}';
-                            return ListTile(
-                              dense: true,
-                              title: Text(info.title),
-                              subtitle: Text('${info.summary}\n$time'),
-                              isThreeLine: true,
-                              leading: const Icon(Icons.download, size: 18),
+                            return GestureDetector(
                               onTap: () => _showRawDialog(context, info),
+                              child: Container(
+                                color: MeshPalette.bg,
+                                padding: const EdgeInsets.symmetric(
+                                  horizontal: 16,
+                                  vertical: 8,
+                                ),
+                                child: Row(
+                                  crossAxisAlignment: CrossAxisAlignment.start,
+                                  children: [
+                                    const Icon(
+                                      Icons.download,
+                                      size: 18,
+                                      color: MeshPalette.signal,
+                                    ),
+                                    const SizedBox(width: 10),
+                                    Expanded(
+                                      child: Column(
+                                        crossAxisAlignment:
+                                            CrossAxisAlignment.start,
+                                        children: [
+                                          Text(
+                                            info.title,
+                                            style: MeshTheme.mono(
+                                              fontSize: 11.5,
+                                              color: MeshPalette.ink,
+                                            ),
+                                          ),
+                                          const SizedBox(height: 2),
+                                          Text(
+                                            info.summary,
+                                            style: MeshTheme.mono(
+                                              fontSize: 10,
+                                              color: MeshPalette.ink3,
+                                            ),
+                                          ),
+                                          const SizedBox(height: 2),
+                                          Text(
+                                            time,
+                                            style: MeshTheme.mono(
+                                              fontSize: 9.5,
+                                              color: MeshPalette.ink4,
+                                            ),
+                                          ),
+                                        ],
+                                      ),
+                                    ),
+                                  ],
+                                ),
+                              ),
                             );
                           },
                         )
                       : Center(
-                          child: Text(context.l10n.debugLog_noBleActivity),
+                          child: Text(
+                            context.l10n.debugLog_noBleActivity,
+                            style: const TextStyle(color: MeshPalette.ink3),
+                          ),
                         ),
                 ),
               ],
@@ -283,66 +377,66 @@ class _BleDebugLogScreenState extends State<BleDebugLogScreen> {
     if (payload.length < 101) {
       return 'ADVERT (short)';
     }
-    var offset = 0;
-    final pubKey = _bytesToHex(
-      payload.sublist(offset, offset + 32),
-      spaced: false,
-    );
-    offset += 32;
-    final timestamp = readUint32LE(payload, offset);
-    offset += 4;
-    offset += 64; // signature
-    final flags = payload[offset++];
-    final role = _deviceRoleLabel(flags & 0x0F);
-    final hasLocation = (flags & 0x10) != 0;
-    final hasFeature1 = (flags & 0x20) != 0;
-    final hasFeature2 = (flags & 0x40) != 0;
-    final hasName = (flags & 0x80) != 0;
-    String? name;
-    double? lat;
-    double? lon;
-    if (hasLocation && payload.length >= offset + 8) {
-      lat = readInt32LE(payload, offset) / 1000000.0;
-      lon = readInt32LE(payload, offset + 4) / 1000000.0;
-      offset += 8;
+    final reader = BufferReader(payload);
+    try {
+      final pubKey = _bytesToHex(reader.readBytes(pubKeySize), spaced: false);
+
+      final timestamp = reader.readUInt32LE();
+      reader.skipBytes(signatureSize);
+      final flags = reader.readByte();
+      final role = _deviceRoleLabel(flags & 0x0F);
+      final hasLocation = (flags & 0x10) != 0;
+      final hasFeature1 = (flags & 0x20) != 0;
+      final hasFeature2 = (flags & 0x40) != 0;
+      final hasName = (flags & 0x80) != 0;
+      String? name;
+      double? lat;
+      double? lon;
+      if (hasLocation) {
+        lat = reader.readInt32LE() / 1000000.0;
+        lon = reader.readInt32LE() / 1000000.0;
+      }
+      if (hasFeature1) reader.skipBytes(2);
+      if (hasFeature2) reader.skipBytes(2);
+      if (hasName) {
+        name = reader.readCStringGreedy(maxNameSize);
+      }
+      final namePart = (name != null && name.isNotEmpty) ? ' name="$name"' : '';
+      final locPart = (lat != null && lon != null)
+          ? ' loc=${lat.toStringAsFixed(6)},${lon.toStringAsFixed(6)}'
+          : '';
+      return 'ADVERT role=$role ts=$timestamp$namePart$locPart key=${pubKey.substring(0, 12)}…';
+    } catch (e) {
+      return 'ADVERT (invalid)';
     }
-    if (hasFeature1) offset += 2;
-    if (hasFeature2) offset += 2;
-    if (hasName && payload.length > offset) {
-      final rawName = String.fromCharCodes(payload.sublist(offset));
-      final nul = rawName.indexOf('\u0000');
-      name = nul >= 0 ? rawName.substring(0, nul) : rawName;
-      name = name.trim();
-    }
-    final namePart = (name != null && name.isNotEmpty) ? ' name="$name"' : '';
-    final locPart = (lat != null && lon != null)
-        ? ' loc=${lat.toStringAsFixed(6)},${lon.toStringAsFixed(6)}'
-        : '';
-    return 'ADVERT role=$role ts=$timestamp$namePart$locPart key=${pubKey.substring(0, 12)}…';
   }
 
   String _decodeControlSummary(Uint8List payload) {
-    if (payload.isEmpty) return 'CONTROL (empty)';
-    final flags = payload[0];
-    final subType = flags & 0xF0;
-    if (subType == 0x80) {
-      if (payload.length < 6) return 'CONTROL DISCOVER_REQ (short)';
-      final typeFilter = payload[1];
-      final tag = readUint32LE(payload, 2);
-      final since = payload.length >= 10 ? readUint32LE(payload, 6) : 0;
-      return 'CONTROL DISCOVER_REQ filter=0x${typeFilter.toRadixString(16).padLeft(2, '0')} tag=$tag since=$since';
+    final reader = BufferReader(payload);
+    try {
+      final flags = reader.readByte();
+      final subType = flags & 0xF0;
+      if (subType == 0x80) {
+        if (payload.length < 6) return 'CONTROL DISCOVER_REQ (short)';
+        final typeFilter = reader.readByte();
+        final tag = reader.readInt32LE();
+        final since = payload.length >= 10 ? reader.readInt32LE() : 0;
+        return 'CONTROL DISCOVER_REQ filter=0x${typeFilter.toRadixString(16).padLeft(2, '0')} tag=$tag since=$since';
+      }
+      if (subType == 0x90) {
+        if (payload.length < 14) return 'CONTROL DISCOVER_RESP (short)';
+        final nodeType = flags & 0x0F;
+        final snrRaw = payload[1];
+        final snrSigned = snrRaw > 127 ? snrRaw - 256 : snrRaw;
+        final snr = snrSigned / 4.0;
+        final tag = reader.readInt32LE();
+        final keyLen = payload.length - 6;
+        return 'CONTROL DISCOVER_RESP node=${_deviceRoleLabel(nodeType)} snr=${snr.toStringAsFixed(2)} tag=$tag key=$keyLen';
+      }
+      return 'CONTROL subtype=0x${subType.toRadixString(16).padLeft(2, '0')}';
+    } catch (e) {
+      return 'CONTROL (invalid)';
     }
-    if (subType == 0x90) {
-      if (payload.length < 14) return 'CONTROL DISCOVER_RESP (short)';
-      final nodeType = flags & 0x0F;
-      final snrRaw = payload[1];
-      final snrSigned = snrRaw > 127 ? snrRaw - 256 : snrRaw;
-      final snr = snrSigned / 4.0;
-      final tag = readUint32LE(payload, 2);
-      final keyLen = payload.length - 6;
-      return 'CONTROL DISCOVER_RESP node=${_deviceRoleLabel(nodeType)} snr=${snr.toStringAsFixed(2)} tag=$tag key=$keyLen';
-    }
-    return 'CONTROL subtype=0x${subType.toRadixString(16).padLeft(2, '0')}';
   }
 
   String _payloadTypeLabel(int payloadType) {